This patch mainly made the following changes:
1. Support AVX-VNNI instructions;
2. Introduce ExplicitVEXPrefix flag so that vpdpbusd/vpdpbusds/vpdpbusds/vpdpbusds instructions only use vex-encoding when user explicity add {vex} prefix.
Differential Revision: https://reviews.llvm.org/D89105
We have pseudo instructions we use for bitcasts between these types.
We have them in the load folding table, but not the store folding
table. This adds them there so they can be used for stack spills.
I added an exact size check so that we don't fold when the stack slot
is larger than the GPR. Otherwise the upper bits in the stack slot
would be garbage. That would be fine for Eli's test case in PR47874,
but I'm not sure its safe in general.
A step towards fixing PR47874. Next steps are to change the ADDSSrr_Int
pseudo instructions to use FR32 as the second source register class
instead of VR128. That will keep the coalescer from promoting the
register class of the bitcast instruction which will make the stack
slot 4 bytes instead of 16 bytes.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D89656
The pass is updated to handle loads through complex addressing mode,
specifically, when we have a scaled register and a scale.
It requires two API updates in TII which have been implemented for X86.
See added IR and MIR testcases.
Tests-Run: make check
Reviewed-By: reames, danstrushin
Differential Revision: https://reviews.llvm.org/D87148
This is the first in a series of patches to make implicit null checks
more general. This patch identifies instructions that preserves zero
value of a register and considers that as a valid instruction to hoist
along with the faulting load. See added testcases.
Reviewed-By: reames, dantrushin
Differential Revision: https://reviews.llvm.org/D87108
X86 is the only user of this interface in tree. Previously the
X86 pass would loop over operands looking for one undef operand for
the pass to fix. But there could theoretically be multiple operands
to fix. So it makes more sense for the pass to do the looping and
ask the target if an operand needs to be fixed.
This is just a thin wrapper around computeRegisterLivness which
we can just call directly. The only real difference is that
isSafeToClobberEFLAGS returns a bool and computeRegisterLivness
returns an enum. So we need to check for the specific enum value
that isSafeToClobberEFLAGS was hiding.
I've also adjusted which sites pass an explicit value for
Neighborhood since the default for computeRegisterLivness is 10.
I messed up the bug numbers in the commit message before
Previously this function searched 4 instructions forwards or
backwards to determine if it was ok to clobber eflags.
This is called in 3 places: rematerialization, turning 2 operand
leas into adds or splitting 3 ops leas into an lea and add on some
CPU targets.
This patch increases the search limit to 10 instructions for
rematerialization and 2 operand lea to add. I've left the old
treshold for 3 ops lea spliting as that increases code size.
Fixes PR47024 and PR46315.
Previously this function searched 4 instructions forwards or
backwards to determine if it was ok to clobber eflags.
This is called in 3 places: rematerialization, turning 2 operand
leas into adds or splitting 3 ops leas into an lea and add on some
CPU targets.
This patch increases the search limit to 10 instructions for
rematerialization and 2 operand lea to add. I've left the old
treshold for 3 ops lea spliting as that increases code size.
Fixes PR47024 and PR43014
Instructions should not be scheduled across ENDBR instructions, as this would result in the ENDBR being displaced, breaking the parity needed for the Indirect Branch Tracking feature of CET.
Currently, the X86IndirectBranchTracking pass is later than the instruction scheduling in the pipeline, what causes the bug to be unnoticeable and very hard (if not unfeasible) to be triggered while compiling C files with the standard LLVM setup. Yet, for correctness and to prevent issues in future changes, the compiler should prevent the such scheduling.
Differential Revision: https://reviews.llvm.org/D84862
Summary:
Almost all uses of these iterators, including implicit ones, really
only need the const variant (as it should be). The only exception is
in NewGVN, which changes the order of dominator tree child nodes.
Change-Id: I4b5bd71e32d71b0c67b03d4927d93fe9413726d4
Reviewers: arsenm, RKSimon, mehdi_amini, courbet, rriddle, aartbik
Subscribers: wdng, Prazek, hiraditya, kuhar, rogfer01, rriddle, jpienaar, shauheen, antiagainst, nicolasvasilache, arpith-jacob, mgester, lucyrfox, aartbik, liufengdb, stephenneuendorffer, Joonsoo, grosul1, vkmr, Kayjukh, jurahul, msifontes, cfe-commits, llvm-commits
Tags: #clang, #mlir, #llvm
Differential Revision: https://reviews.llvm.org/D83087
Summary:
While clustering mem ops, AMDGPU target needs to consider number of clustered bytes
to decide on max number of mem ops that can be clustered. This patch adds support to pass
number of clustered bytes to target mem ops clustering logic.
Reviewers: foad, rampitec, arsenm, vpykhtin, javedabsar
Reviewed By: foad
Subscribers: MatzeB, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, javed.absar, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80545
This enables the register to be changed from XMM/YMM/ZMM0 to
instead match the other source. This prevents a false
dependency.
I added all the integer unpck instructions, but the tests
only show changes for BW and WD.
Unfortunately, we can have undef on operand 1 or 2 of the AVX
instructions. This breaks the interface with hasUndefRegUpdate
which used to tell which operand to check.
Now we scan the input operands looking for an undef register and
then ask hasUndefRegUpdate if its an instruction we care about
and which operands of that instruction we care about.
I also had to make some changes to the load folding code to
always pass operand 1 to hasUndefRegUpdate. I've updated
hasUndefRegUpdate to return false when ForLoadFold is set for
instructions that are not explicitly blocked for load folding in
isel patterns.
Differential Revision: https://reviews.llvm.org/D79615
We generate PACK instructions with an undef second source when we are truncating from a 128-bit vector to something narrower and we don't care about the upper bits of the vector register. The register allocation process will always assign untied undef uses to xmm0. This creates a false dependency on xmm0.
By adding these instructions to hasUndefRegUpdate, we can get the BreakFalseDeps pass to reassign the source to match the other input. Normally this interface is used for instructions that might need an xor inserted to break the dependency. But the pass also has a heuristic that tries to use the same register as other sources. That should always be possible for these instructions so we'll never trigger the xor dependency break.
Differential Revision: https://reviews.llvm.org/D79032
Summary:
While looking into issues with IfConverter, I noticed that
X86InstrInfo::isUnpredicatedTerminator matched its overriden
implementation in TargetInstrInfo::isUnpredicatedTerminator.
Reviewers: craig.topper, hfinkel, MaskRay, echristo
Reviewed By: MaskRay, echristo
Subscribers: hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62749
[MachineOutliner] fix test for excluding CFI and add test to include CFI in outlining
New test to check that we only outline CFI instruction if all CFI
Instructions in the function would be captured by the outlining
adding x86 tests analagous to AARCH64 cfi tests
Revision: https://reviews.llvm.org/D77852
Summary:
Otherwise PostRA list scheduler may reorder instruction, such as
schedule this
'''
pushq $0x8
pop %rbx
lea 0x2a0(%rsp),%r15
'''
to
'''
pushq $0x8
lea 0x2a0(%rsp),%r15
pop %rbx
'''
by mistake. The patch is to prevent this to happen by making sure POP has
implicit use of SP.
Reviewers: craig.topper
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77031
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, jfb, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77059
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: dylanmckay, sdardis, nemanjai, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76551
Patch by Zola Bridges!
From the review:
"""
I moved these functions to X86InstrInfo.cpp, so they are available from
another pass. In addition, this is a step toward resolving the FIXME to
move this metadata to the instruction tables.
This is the final step to make these two data invariance checks
available for non-SLH passes.
The other two steps were here:
- https://reviews.llvm.org/D70283
- https://reviews.llvm.org/D75650
Tested via llvm-lit llvm/test/CodeGen/X86/speculative-load-hardening*
"""
Differential Revision: https://reviews.llvm.org/D75654
I believe this is the correct fix for D75506 rather than disabling all commuting. We can still commute the remaining two sources.
Differential Revision:m https://reviews.llvm.org/D75526
The code changes here are hopefully straightforward:
1. Use MachineInstruction flags to decide if FP ops can be reassociated
(use both "reassoc" and "nsz" to be consistent with IR transforms;
we probably don't need "nsz", but that's a safer interpretation of
the FMF).
2. Check that both nodes allow reassociation to change instructions.
This is a stronger requirement than we've usually implemented in
IR/DAG, but this is needed to solve the motivating bug (see below),
and it seems unlikely to impede optimization at this late stage.
3. Intersect/propagate MachineIR flags to enable further reassociation
in MachineCombiner.
We managed to make MachineCombiner flexible enough that no changes are
needed to that pass itself. So this patch should only affect x86
(assuming no other targets have implemented the hooks using MachineIR
flags yet).
The motivating example in PR43609 is another case of fast-math transforms
interacting badly with special FP ops created during lowering:
https://bugs.llvm.org/show_bug.cgi?id=43609
The special fadd ops used for converting int to FP assume that they will
not be altered, so those are created without FMF.
However, the MachineCombiner pass was being enabled for FP ops using the
global/function-level TargetOption for "UnsafeFPMath". We managed to run
instruction/node-level FMF all the way down to MachineIR sometime in the
last 1-2 years though, so we can do better now.
The test diffs require some explanation:
1. llvm/test/CodeGen/X86/fmf-flags.ll - no target option for unsafe math was
specified here, so MachineCombiner kicks in where it did not previously;
to make it behave consistently, we need to specify a CPU schedule model,
so use the default model, and there are no code diffs.
2. llvm/test/CodeGen/X86/machine-combiner.ll - replace the target option for
unsafe math with the equivalent IR-level flags, and there are no code diffs;
we can't remove the NaN/nsz options because those are still used to drive
x86 fmin/fmax codegen (special SDAG opcodes).
3. llvm/test/CodeGen/X86/pow.ll - similar to #1
4. llvm/test/CodeGen/X86/sqrt-fastmath.ll - similar to #1, but MachineCombiner
does some reassociation of the estimate sequence ops; presumably these are
perf wins based on latency/throughput (and we get some reduction of move
instructions too); I'm not sure how it affects numerical accuracy, but the
test reflects reality better now because we would expect MachineCombiner to
be enabled if the IR was generated via something like "-ffast-math" with clang.
5. llvm/test/CodeGen/X86/vec_int_to_fp.ll - this is the test added to model PR43609;
the fadds are not reassociated now, so we should get the expected results.
6. llvm/test/CodeGen/X86/vector-reduce-fadd-fast.ll - similar to #1
7. llvm/test/CodeGen/X86/vector-reduce-fmul-fast.ll - similar to #1
Differential Revision: https://reviews.llvm.org/D74851
Summary:
Making `Scale` a `TypeSize` in AArch64InstrInfo::getMemOpInfo,
has the effect that all places where this information is used
(notably, TargetInstrInfo::getMemOperandWithOffset) will need
to consider Scale - and derived, Offset - possibly being scalable.
This patch adds a new operand `bool &OffsetIsScalable` to
TargetInstrInfo::getMemOperandWithOffset and fixes up all
the places where this function is used, to consider the
offset possibly being scalable.
In most cases, this means bailing out because the algorithm does not
(or cannot) support scalable offsets in places where it does some
form of alias checking for example.
Reviewers: rovka, efriedma, kristof.beyls
Reviewed By: efriedma
Subscribers: wuzish, kerbowa, MatzeB, arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, javed.absar, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72758
Only 32 and 64 bit SBB are dependency breaking instructons on some
CPUs. The 8 and 16 bit forms have to preserve upper bits of the GPR.
This patch removes the smaller forms and selects the wider form
instead. I had to do this with custom code as the tblgen generated
code glued the eflags copytoreg to the extract_subreg instead of
to the SETB pseudo.
Longer term I think we can remove X86ISD::SETCC_CARRY and use
(X86ISD::SBB zero, zero). We'll want to keep the pseudo and select
(X86ISD::SBB zero, zero) to either a MOV32r0+SBB for targets where
there is no dependency break and SETB_C32/SETB_C64 for targets
that have a dependency break. May want some way to avoid the MOV32r0
if the instruction that produced the carry flag happened to def a
register that we can use for the dependency.
I think the flag copy lowering should be using NEG instead of SUB to
handle SETB. That would avoid the MOV32r0 there. Or maybe it should
use a ADC with -1 to recreate the carry flag and keep the SETB?
That would avoid a MOVZX on the input of the SUB.
Differential Revision: https://reviews.llvm.org/D74024
The generic BaseMemOpClusterMutation calls into TargetInstrInfo to
analyze the address of each load/store instruction, and again to decide
whether two instructions should be clustered. Previously this had to
represent each address as a single base operand plus a constant byte
offset. This patch extends it to support any number of base operands.
The old target hook getMemOperandWithOffset is now a convenience
function for callers that are only prepared to handle a single base
operand. It calls the new more general target hook
getMemOperandsWithOffset.
The only requirements for the base operands returned by
getMemOperandsWithOffset are:
- they can be sorted by MemOpInfo::Compare, such that clusterable ops
get sorted next to each other, and
- shouldClusterMemOps knows what they mean.
One simple follow-on is to enable clustering of AMDGPU FLAT instructions
with both vaddr and saddr (base register + offset register). I've left
a FIXME in the code for this case.
Differential Revision: https://reviews.llvm.org/D71655
In GlobalISel we may in some unfortunate circumstances generate PHIs with
operands that are on separate banks. If-conversion doesn't currently check for
that case and ends up generating a CSEL on AArch64 with incorrect register
operands.
Differential Revision: https://reviews.llvm.org/D72961
The 64-bit HasMemoryOperand line was using CMOV32rm instead of
CMOV64rm. Not sure how to test this. We have no test coverage
that passes true for HasMemoryOperand.
This fixes an assertion failure that triggers inside
getMemOperandWithOffset when Machine Sinking calls it on a MachineInstr
that is not a memory operation.
Different backends implement getMemOperandWithOffset differently: some
return false on non-memory MachineInstrs, others assert.
The Machine Sinking pass in at least SinkingPreventsImplicitNullCheck
relies on getMemOperandWithOffset to return false on non-memory
MachineInstrs, instead of asserting.
This patch updates the documentation on getMemOperandWithOffset that it
should return false on any MachineInstr it cannot handle, instead of
asserting. It also adapts the in-tree backends accordingly where
necessary.
Differential Revision: https://reviews.llvm.org/D71359
Summary:
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes situations in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: ormris, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D70431
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes a case in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
Refactor usage of isCopyInstrImpl, isCopyInstr and isAddImmediate methods
to return optional machine operand pair of destination and source
registers.
Patch by Nikola Prica
Differential Revision: https://reviews.llvm.org/D69622
Refactor usage of isCopyInstrImpl, isCopyInstr and isAddImmediate methods
to return optional machine operand pair of destination and source
registers.
Patch by Nikola Prica
Differential Revision: https://reviews.llvm.org/D69622
This adds a flag to LLVM and clang to always generate a .debug_frame
section, even if other debug information is not being generated. In
situations where .eh_frame would normally be emitted, both .debug_frame
and .eh_frame will be used.
Differential Revision: https://reviews.llvm.org/D67216
Summary:
The default implementation of the describeLoadedValue() hook uses the
MoveImm property to determine if an instruction moves an immediate. If
an instruction has that property the function returns the second
operand, assuming that that is the immediate value the instruction
moves. As far as I can tell, the MoveImm property does not imply that
the second operand is the immediate value, nor that any other operand
necessarily holds the immediate value; it just means that the
instruction moves some immediate value.
One example where the second operand is not the immediate is SystemZ's
LZER instruction, which moves a zero immediate implicitly: $f0S = LZER.
That case triggered an out-of-bound assertion when getting the operand.
I have added a test case for that instruction.
Another example is ARM's MVN instruction, which holds the logical
bitwise NOT'd value of the immediate that is moved. For the following
reproducer:
extern void foo(int);
int main() { foo(-11); }
an incorrect call site value would be emitted:
$ clang --target=arm foo.c -O1 -g -Xclang -femit-debug-entry-values \
-c -o - | ./build/bin/llvm-dwarfdump - | \
grep -A2 call_site_parameter
0x00000058: DW_TAG_GNU_call_site_parameter
DW_AT_location (DW_OP_reg0 R0)
DW_AT_GNU_call_site_value (DW_OP_lit10)
Another example is the A2_combineii instruction on Hexagon which moves
two immediates to a super-register: $d0 = A2_combineii 20, 10.
Perhaps these are rare exceptions, and most MoveImm instructions hold
the immediate in the second operand, but in my opinion the default
implementation of the hook should only describe values that it can, by
some contract, guarantee are safe to describe, rather than leaving it up
to the targets to override the exceptions, as that can silently result
in incorrect call site values.
This patch adds X86's relevant move immediate instructions to the
target's hook implementation, so this commit should be a NFC for that
target. We need to do the same for ARM and AArch64.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: vsk
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D69109
We have isel patterns that can put an IMPLICIT_DEF on one of
the sources for these instructions. So we should make sure
we break any dependencies there. This should be done by
just using one of the other sources.
llvm-svn: 373025
Neither the base implementation of findCommutedOpIndices nor any in-tree target modifies the instruction passed in and there is no reason why they would in the future.
Committed on behalf of @hvdijk (Harald van Dijk)
Differential Revision: https://reviews.llvm.org/D66138
llvm-svn: 372882
The BLENDM instructions allow an 2 sources and an independent
destination while masked VBROADCAST has the destination tied
to the source.
llvm-svn: 372068
Summary:
Add zero-materializing XORs to X86's describeLoadedValue() hook in order
to produce call site values.
I have had to change the defs logic in collectCallSiteParameters() a bit
to be able to describe the XORs. The XORs implicitly define $eflags,
which would cause them to never be considered, due to a guard condition
that I->getNumDefs() is one. I have changed that condition so that we
now only consider instructions where a forwarded register overlaps with
the instruction's single explicit define. We still need to collect the implicit
defines of other forwarded registers to remove them from the work list.
I'm not sure how to move towards supporting instructions with multiple
explicit defines, cases where forwarded register are implicitly defined,
and/or cases where an instruction produces values for multiple forwarded
registers. Perhaps the describeLoadedValue() hook should take a register
argument, and we then leave it up to the hook to describe the loaded
value in that register? I have not yet encountered a situation where
that would be necessary though.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: vsk
Subscribers: ychen, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67225
llvm-svn: 371333
Summary:
This changes the ParamLoadedValue pair which the describeLoadedValue()
hook returns so that MachineOperand objects are returned instead of
pointers.
When describing call site values we may need to describe operands which
are not part of the instruction. One such example is zero-materializing
XORs on x86, which I have implemented support for in a child revision.
Instead of having to return a pointer to an operand stored somewhere
outside the instruction, start returning objects directly instead, as
that simplifies the code.
The MachineOperand class only holds POD members, and on x86-64 it is 32
bytes large. That combined with copy elision means that the overhead of
returning a machine operand object from the hook does not become very
large.
I benchmarked this on a 8-thread i7-8650U machine with 32 GB RAM. The
benchmark consisted of building a clang 8.0 binary configured with:
-DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DLLVM_TARGETS_TO_BUILD=X86 \
-DLLVM_USE_SANITIZER=Address \
-DCMAKE_CXX_FLAGS="-Xclang -femit-debug-entry-values -stdlib=libc++"
The average wall clock time increased by 4 seconds, from 62:05 to
62:09, which is an 0.1% increase.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: vsk
Subscribers: hiraditya, ychen, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67261
llvm-svn: 371332
Fixes clang static-analyzer warning.
Technically the MachineInstr *Sub might still be null if we're comparing zero (IsCmpZero == true), although this probably won't happen as SrcReg2 is probably == 0.
llvm-svn: 371047
MachineLICM can hoist an invariant load, but if that load is folded it needs to be unfolded. On AVX512 sometimes this load is an broadcast load which we were previously unable to unfold. This patch adds initial support for that with a very basic list of supported instructions as a starting point.
Differential Revision: https://reviews.llvm.org/D67017
llvm-svn: 370620
I'm looking at unfolding broadcast loads on AVX512 which will
require refactoring this code to select broadcast opcodes instead
of regular load/stores in some cases. Merging them to avoid
further complicating their interfaces.
llvm-svn: 370484
Add a default with an llvm_unreachable for anything we don't expect.
This seems safer that just blindly returning true for anything
missing from the switch.
llvm-svn: 370424
This was a quick pass through some obvious places. I haven't tried the clang-tidy check.
I also replaced the zeroes in getX86SubSuperRegister with X86::NoRegister which is the real sentinel name.
Differential Revision: https://reviews.llvm.org/D66363
llvm-svn: 369151
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
We mostly avoid sub with immediate but there are a couple cases that can create them. One is the add 128, %rax -> sub -128, %rax trick in isel. The other is when a SUB immediate gets created for a compare where both the flags and the subtract value is used. If we are unable to linearize the SelectionDAG to satisfy the flag user and the sub result user from the same instruction, we will clone the sub immediate for the two uses. The one that produces flags will eventually become a compare. The other will have its flag output dead, and could then be considered for LEA creation.
I added additional test cases to add.ll to show the the sub -128 trick gets converted to LEA and a case where we don't need to convert it.
This showed up in the current codegen for PR42571.
Differential Revision: https://reviews.llvm.org/D64574
llvm-svn: 366151
We can use the C flag from NEG to detect that the input was zero.
Really we could probably use the Z flag too. But C matches what
we'd do for usubo 0, X.
Haven't found a test case for this due to the usubo formation
in CGP. But I verified if I comment out the CGP code this
transformation catches some of the same cases.
llvm-svn: 365929
Unfortunately subo formation in CGP prevents obvious ways of
testing this.
But we already have BLSI in here and the flag behavior is
well understood.
Might become more useful if we improve PR42571.
llvm-svn: 365702
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
This can help avoid a copy or enable load folding.
On SSE4.1 targets we can commute it to blendi instead.
I had to make shufpd with a 0x02 immediate commutable as well
since we expect commuting to be reversible.
llvm-svn: 365292
These patterns are the same as the MOVLPDmr and MOVHPDmr patterns,
but with a bitcast at the end. We can just select the PD instruction
and let execution domain fixing switch to PS.
llvm-svn: 365267
The Size either needs to be 0 meaning we aren't folding
a stack reload. Or the stack slot needs to be at least
16 bytes. I've also added a paranoia check ensure the
RCSize is at leat 16 bytes as well. This avoids any
FR32/FR64 surprises, but I think we already filtered
those earlier.
All of our test case have Size as either 0 or 16 and
RCSize == 16. So the Size <= 16 check worked for those
cases.
llvm-svn: 365234
Avoids using a plain unsigned for registers throughoug codegen.
Doesn't attempt to change every register use, just something a little
more than the set needed to build after changing the return type of
MachineOperand::getReg().
llvm-svn: 364191
Summary:
BLSI sets the C flag is the input is not zero. So if its followed
by a TEST of the input where only the Z flag is consumed, we can
replace it with the opposite check of the C flag.
We should be able to do the same for BLSMSK and BLSR, but the
naive test case for those is being optimized to a subo by
CodeGenPrepare.
Reviewers: spatel, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63589
llvm-svn: 363957
The caller of this is looking for comparisons of the input
to these instructions with 0. But the memory instructions
input is an addess not a value input in a register.
llvm-svn: 363907
Rename the old versions that use FR32/FR64 to MOVSSrm_alt/MOVSDrm_alt.
Use the new versions in patterns that previously used a COPY_TO_REGCLASS
to VR128. These patterns expect the upper bits to be zero. The
current set up appears to work, but I'm not sure we should be
enforcing upper bits being zero through a COPY_TO_REGCLASS.
I wanted to flip the arrangement and use a COPY_TO_REGCLASS to
FR32/FR64 for the patterns that need an f32/f64 result, but that
complicated fastisel and globalisel.
I've been doing some experiments with reducing some isel patterns
and ended up in a situation where I had a
(SUBREG_TO_REG (COPY_TO_RECLASS (VMOVSSrm), VR128)) and our
post-isel peephole was unable to avoid using an instruction for
the SUBREG_TO_REG due to the COPY_TO_REGCLASS. Having a VR128
instruction removes the COPY_TO_REGCLASS that was breaking this.
llvm-svn: 363643
The non-masked versions are already in there. I'm having some
trouble coming up with a way to test this right now. Most load
folding should happen during isel so I'm not sure how to get
peephole pass to do it.
llvm-svn: 363125
This patch aims to reduce spilling and register moves by using the 3-address
versions of instructions per default instead of the 2-address equivalent
ones. It seems that both spilling and register moves are improved noticeably
generally.
Regalloc hints are passed to increase conversions to 2-address instructions
which are done in SystemZShortenInst.cpp (after regalloc).
Since the SystemZ reg/mem instructions are 2-address (dst and lhs regs are
the same), foldMemoryOperandImpl() can no longer trivially fold a spilled
source register since the reg/reg instruction is now 3-address. In order to
remedy this, new 3-address pseudo memory instructions are used to perform the
folding only when the dst and lhs virtual registers are known to be allocated
to the same physreg. In order to not let MachineCopyPropagation run and
change registers on these transformed instructions (making it 3-address), a
new target pass called SystemZPostRewrite.cpp is run just after
VirtRegRewriter, that immediately lowers the pseudo to a target instruction.
If it would have been possibe to insert a COPY instruction and change a
register operand (convert to 2-address) in foldMemoryOperandImpl() while
trusting that the caller (e.g. InlineSpiller) would update/repair the
involved LiveIntervals, the solution involving pseudo instructions would not
have been needed. This is perhaps a potential improvement (see Phabricator
post).
Common code changes:
* A new hook TargetPassConfig::addPostRewrite() is utilized to be able to run a
target pass immediately before MachineCopyPropagation.
* VirtRegMap is passed as an argument to foldMemoryOperand().
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D60888
llvm-svn: 362868
As far as I know these should be freely reassociatable just like
the floating point MAXC/MINC instructions.
The *reduce* test changes are largely regressions and caused by
the "generic" CPU we default to not having a scheduler model.
The machine-combiner-int-vec.ll test shows the positive benefits
of this change.
Differential Revision: https://reviews.llvm.org/D62787
llvm-svn: 362629
If we don't have VLX then 256-bit SET0 should be lowered
to VPXOR with ZMM registers. This restores functionality
accidentally removed by r309926.
Differential Revision: https://reviews.llvm.org/D62415
llvm-svn: 361843
As requested in D58632, cleanup our red zone detection logic in the X86 backend. The existing X86MachineFunctionInfo flag is used to track whether we *use* the redzone (via a particularly optimization?), but there's no common way to check whether the function *has* a red zone.
I'd appreciate careful review of the uses being updated. I think they are NFC, but a careful eye from someone else would be appreciated.
Differential Revision: https://reviews.llvm.org/D61799
llvm-svn: 360479
scan-build was reporting that CommutableOpIdx1 never used its original initialized value - move it down to where its first used to make the real initialization more obvious (and matches the comment that's there).
llvm-svn: 360028
Summary:
The basic idea here is to make it possible to use
MachineInstr::mayAlias also when the MachineInstr
is const (or the "Other" MachineInstr is const).
The addition of const in MachineInstr::mayAlias
then rippled down to the need for adding const
in several other places, such as
TargetTransformInfo::getMemOperandWithOffset.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, MatzeB, arsenm, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60856
llvm-svn: 358744
We have two versions of some instructions, VR128 versions and FR32 versions that
are marked as CodeGenOnly.
This change switches to using the VR128 versions for these copies. It's after
register allocation so the class size no longer matters. This matches how GR64
works.
llvm-svn: 358555
Summary:
This avoids needing an isel pattern for each condition code. And it removes translation switches for converting between Jcc instructions and condition codes.
Now the printer, encoder and disassembler take care of converting the immediate. We use InstAliases to handle the assembly matching. But we print using the asm string in the instruction definition. The instruction itself is marked IsCodeGenOnly=1 to hide it from the assembly parser.
Reviewers: spatel, lebedev.ri, courbet, gchatelet, RKSimon
Reviewed By: RKSimon
Subscribers: MatzeB, qcolombet, eraman, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60228
llvm-svn: 357802
Summary:
This avoids needing an isel pattern for each condition code. And it removes translation switches for converting between SETcc instructions and condition codes.
Now the printer, encoder and disassembler take care of converting the immediate. We use InstAliases to handle the assembly matching. But we print using the asm string in the instruction definition. The instruction itself is marked IsCodeGenOnly=1 to hide it from the assembly parser.
Reviewers: andreadb, courbet, RKSimon, spatel, lebedev.ri
Reviewed By: andreadb
Subscribers: hiraditya, lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60138
llvm-svn: 357801
Summary:
Reorder the condition code enum to match their encodings. Move it to MC layer so it can be used by the scheduler models.
This avoids needing an isel pattern for each condition code. And it removes
translation switches for converting between CMOV instructions and condition
codes.
Now the printer, encoder and disassembler take care of converting the immediate.
We use InstAliases to handle the assembly matching. But we print using the
asm string in the instruction definition. The instruction itself is marked
IsCodeGenOnly=1 to hide it from the assembly parser.
This does complicate the scheduler models a little since we can't assign the
A and BE instructions to a separate class now.
I plan to make similar changes for SETcc and Jcc.
Reviewers: RKSimon, spatel, lebedev.ri, andreadb, courbet
Reviewed By: RKSimon
Subscribers: gchatelet, hiraditya, kristina, lebedev.ri, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60041
llvm-svn: 357800
This function should only be called with instructions that are really convertible. And all
convertible instructions need to be handled by the switch. So nothing should use the default.
llvm-svn: 357529
Haswell CPUs have special support for SHLD/SHRD with the same register for both sources. Such an instruction will go to the rotate/shift unit on port 0 or 6. This gives it 1 cycle latency and 0.5 cycle reciprocal throughput. When the register is not the same, it becomes a 3 cycle operation on port 1. Sandybridge and Ivybridge always have 1 cyc latency and 0.5 cycle reciprocal throughput for any SHLD.
When FastSHLDRotate feature flag is set, we try to use SHLD for rotate by immediate unless BMI2 is enabled. But MachineCopyPropagation can look through a copy and change one of the sources to be different. This will break the hardware optimization.
This patch adds psuedo instruction to hide the second source input until after register allocation and MachineCopyPropagation. I'm not sure if this is the best way to do this or if there's some other way we can make this work.
Fixes PR41055
Differential Revision: https://reviews.llvm.org/D59391
llvm-svn: 357096
These are used to help convert OR->LEA when needed to avoid avoid a copy. They
aren't need after register allocation.
Happens to remove an ugly goto from X86MCCodeEmitter.cpp
llvm-svn: 356356
We already do this for 16/32/64 as well as 8-bit add with register/immediate. Might as well do it for 8-bit INC/DEC too.
Differential Revision: https://reviews.llvm.org/D58869
llvm-svn: 355424
We already support 8-bits adds in convertToThreeAddress. But we can also support 8-bit OR if the bits are disjoint. We already do this for 16/32/64.
Differential Revision: https://reviews.llvm.org/D58863
llvm-svn: 355423
Conversion from ConstantSDNode to MachineInstr sign extends immediates from their APInt representation to int64_t.
This commit makes sure we do the same for commuting. The tests changes show how this improves CSE. This issue was made worse by the MachineCSE using commuteInstruction to undo a commute. So we virtually guarantee the sign extend from isel would be lost.
The improved CSE also occurred with r354363, but that was reverted. I'm working to undo the revert, but wanted to get this fix in while it was easy to see the results.
llvm-svn: 354724
Preventing the load fold won't fix the partial register update since the
input we can fold is a GPR. So it will do nothing to prevent a false dependency
on an XMM register.
llvm-svn: 354193
Summary: These instructions update FPSW so they aren't generically safe to rematerialize into any location if FPSW is live for a comparison result. They also use FPCW for exception masking control. Though the only exception they can generate is stack overflow and we manage the stack ourselves so that's not really going to occur.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57934
llvm-svn: 353536
When we are inserting 1 "inline" element, and zeroing 2 of the other elements then we can safely commute the insertps source inputs to improve memory folding.
Differential Revision: https://reviews.llvm.org/D56843
llvm-svn: 351807
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The BEXTR instruction documents the SF bit as undefined.
The TBM BEXTR instruction has the same issue, but I'm not sure how to test it. With the control being an immediate we can determine the sign bit is 0 or the BEXTR would have been removed.
Fixes PR40060
Differential Revision: https://reviews.llvm.org/D55807
llvm-svn: 349956
We already had BSF here as part of __builtin_ffs improvements and I was just wondering yesterday whether we should have BSR there.
This addresses one issue from PR40090.
llvm-svn: 349531
This extends the code that handles 16-bit add promotion to form LEA to also allow 8-bit adds.
That allows us to combine add ops with register moves and save some instructions. This is
another step towards allowing add truncation in generic DAGCombiner (see D54640).
Differential Revision: https://reviews.llvm.org/D55494
llvm-svn: 348946
As discussed in D55494, we want to extend this to handle 8-bit
ops too, but that could be extended further to enable this on
32-bit systems too.
llvm-svn: 348851
As discussed in:
D55494
...this code has been disabled/dead for a long time (the code references
Athlon and Pentium 4), and there's almost no chance that it will be used
given the last decade of uarch evolution. Also, in SDAG we promote 16-bit
ops to 32-bit, so there's almost no way to test this code any more.
llvm-svn: 348845
The existing code tries to handle an undef operand while transforming an add to an LEA,
but it's incomplete because we will crash on the i16 test with the debug output shown below.
It's better to just give up instead. Really, GlobalIsel should have folded these before we
could get into trouble.
# Machine code for function add_undef_i16: NoPHIs, TracksLiveness, Legalized, RegBankSelected, Selected
bb.0 (%ir-block.0):
liveins: $edi
%1:gr32 = COPY killed $edi
%0:gr16 = COPY %1.sub_16bit:gr32
%5:gr64_nosp = IMPLICIT_DEF
%5.sub_16bit:gr64_nosp = COPY %0:gr16
%6:gr64_nosp = IMPLICIT_DEF
%6.sub_16bit:gr64_nosp = COPY %2:gr16
%4:gr32 = LEA64_32r killed %5:gr64_nosp, 1, killed %6:gr64_nosp, 0, $noreg
%3:gr16 = COPY killed %4.sub_16bit:gr32
$ax = COPY killed %3:gr16
RET 0, implicit killed $ax
# End machine code for function add_undef_i16.
*** Bad machine code: Reading virtual register without a def ***
- function: add_undef_i16
- basic block: %bb.0 (0x7fe6cd83d940)
- instruction: %6.sub_16bit:gr64_nosp = COPY %2:gr16
- operand 1: %2:gr16
LLVM ERROR: Found 1 machine code errors.
Differential Revision: https://reviews.llvm.org/D54710
llvm-svn: 348722
Currently, instructions doing memory accesses through a base operand that is
not a register can not be analyzed using `TII::getMemOpBaseRegImmOfs`.
This means that functions such as `TII::shouldClusterMemOps` will bail
out on instructions using an FI as a base instead of a register.
The goal of this patch is to refactor all this to return a base
operand instead of a base register.
Then in a separate patch, I will add FI support to the mem op clustering
in the MachineScheduler.
Differential Revision: https://reviews.llvm.org/D54846
llvm-svn: 347746
Change the type in a couple of lists and sets that only store physical
registers from unsigned to MCPhysRegs. The later is only 16bits and
saves us a bit of memory.
llvm-svn: 346254
Before this patch, class PredicateExpander only knew how to expand simple
predicates that performed checks on instruction operands.
In particular, the new scheduling predicate syntax was not rich enough to
express checks like this one:
Foo(MI->getOperand(0).getImm()) == ExpectedVal;
Here, the immediate operand value at index zero is passed in input to function
Foo, and ExpectedVal is compared against the value returned by function Foo.
While this predicate pattern doesn't show up in any X86 model, it shows up in
other upstream targets. So, being able to support those predicates is
fundamental if we want to be able to modernize all the scheduling models
upstream.
With this patch, we allow users to specify if a register/immediate operand value
needs to be passed in input to a function as part of the predicate check. Now,
register/immediate operand checks all derive from base class CheckOperandBase.
This patch also changes where TIIPredicate definitions are expanded by the
instructon info emitter. Before, definitions were expanded in class
XXXGenInstrInfo (where XXX is a target name).
With the introduction of this new syntax, we may want to have TIIPredicates
expanded directly in XXXInstrInfo. That is because functions used by the new
operand predicates may only exist in the derived class (i.e. XXXInstrInfo).
This patch is a non functional change for the existing scheduling models.
In future, we will be able to use this richer syntax to better describe complex
scheduling predicates, and expose them to llvm-mca.
Differential Revision: https://reviews.llvm.org/D53880
llvm-svn: 345714
Instead of using the MOVGOT64r pseudo, use the existing
MO_PIC_BASE_OFFSET support on symbol operands. Now I don't have to
create a "scratch register operand" for the pseudo to use, and the
register allocator can make better decisions.
Fixes some X86 verifier errors tracked in PR27481.
llvm-svn: 345219
This patch brings back the MOV64r0 pseudo instruction for zeroing a 64-bit register. This replaces the SUBREG_TO_REG MOV32r0 sequence we use today. Post register allocation we will rewrite the MOV64r0 to a 32-bit xor with an implicit def of the 64-bit register similar to what we do for the various XMM/YMM/ZMM zeroing pseudos.
My main motivation is to enable the spill optimization in foldMemoryOperandImpl. As we were seeing some code that repeatedly did "xor eax, eax; store eax;" to spill several registers with a new xor for each store. With this optimization enabled we get a store of a 0 immediate instead of an xor. Though I admit the ideal solution would be one xor where there are multiple spills. I don't believe we have a test case that shows this optimization in here. I'll see if I can try to reduce one from the code were looking at.
There's definitely some other machine CSE(and maybe other passes) behavior changes exposed by this patch. So it seems like there might be some other deficiencies in SUBREG_TO_REG handling.
Differential Revision: https://reviews.llvm.org/D52757
llvm-svn: 345165
analyzeBranch()/insertBranch() etc. do not properly deal with an undef
flag on the eflags input and used to produce invalid MIR. I don't see
this ever affecting real world inputs (I don't think it is possible to
produce undef flags with llvm IR), so I simply changed the code to bail
out in this case.
rdar://42122367
llvm-svn: 344970
This rebases and recommits r343520. hwasan should be fixed now and this
shouldn't break the tests anymore.
Spill/reload instructions are artificially generated by the compiler and
have no relation to the original source code. So the best thing to do is
not attach any debug location to them (instead of just taking the next
debug location we find on following instructions).
Differential Revision: https://reviews.llvm.org/D52125
llvm-svn: 343895
Spill/reload instructions are artificially generated by the compiler and
have no relation to the original source code. So the best thing to do is
not attach any debug location to them (instead of just taking the next
debug location we find on following instructions).
Differential Revision: https://reviews.llvm.org/D52125
llvm-svn: 343520
There's a conditional report_fatal_error just above this llvm_unreachable. The optimizer when seeing the unreachable removes the conditional and just makes any other error trigger the existing report_fatal_error.
llvm-svn: 343428
This removes the FrameAccess struct that was added to the interface
in D51537, since the PseudoValue from the MachineMemoryOperand
can be safely casted to a FixedStackPseudoSourceValue.
Reviewers: MatzeB, thegameg, javed.absar
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51617
llvm-svn: 341454
For instructions that spill/fill to and from multiple frame-indices
in a single instruction, hasStoreToStackSlot and hasLoadFromStackSlot
should return an array of accesses, rather than just the first encounter
of such an access.
This better describes FI accesses for AArch64 (paired) LDP/STP
instructions.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar, MatzeB
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D51537
llvm-svn: 341301
..Move all target-dependent checks into new isCopyInstrImpl method.
This change allows us to treat MoveReg-type instructions and generic
COPY instruction in the same way
Differential Revision: https://reviews.llvm.org/D49913
llvm-svn: 341072
Variables declared with the dllimport attribute are accessed via a
stub variable named __imp_<var>. In MinGW configurations, variables that
aren't declared with a dllimport attribute might still end up imported
from another DLL with runtime pseudo relocs.
For x86_64, this avoids the risk that the target is out of range
for a 32 bit PC relative reference, in case the target DLL is loaded
further than 4 GB from the reference. It also avoids having to make the
text section writable at runtime when doing the runtime fixups, which
makes it worthwhile to do for i386 as well.
Add stub variables for all dso local data references where a definition
of the variable isn't visible within the module, since the DLL data
autoimporting might make them imported even though they are marked as
dso local within LLVM.
Don't do this for variables that actually are defined within the same
module, since we then know for sure that it actually is dso local.
Don't do this for references to functions, since there's no need for
runtime pseudo relocations for autoimporting them; if a function from
a different DLL is called without the appropriate dllimport attribute,
the call just gets routed via a thunk instead.
GCC does something similar since 4.9 (when compiling with -mcmodel=medium
or large; from that version, medium is the default code model for x86_64
mingw), but only for x86_64.
Differential Revision: https://reviews.llvm.org/D51288
llvm-svn: 340942
Gaurav Jain