VPReplicateRecipe::isUniform actually means uniform-per-parts, hence a
scalar instruction is generated per-part.
This is a potential alternative D132892. For now the current patch only
catches cases where the address is trivially invariant (defined outside
VPlan), while D132892 catches any address that is considered invariant
by SCEV AFAICT.
It should be possible to hoist fully invariant recipes feeding loads out
of the vector loop region as well, but in practice LICM should do that
already.
This version of the patch artificially limits this to loads to make it
easier to compare, but this restriction should be easily liftable.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D133019
Don't demand low order bits from the LHS of an Add if:
- they are not demanded in the result, and
- they are known to be zero in the RHS, so they can't possibly
overflow and affect higher bit positions
This is intended to avoid a regression from a future patch to change
the order of canonicalization of ADD and AND.
Differential Revision: https://reviews.llvm.org/D130075
This extends the handling of uniform memory operations to handle the case where a store is storing a loop invariant value. Unlike the general case of a store to an invariant address where we must use the last active lane, in this case we can use any lane since all lanes must produce the same result.
For context, the basic structure of the existing code and how the change fits in:
* First, we select a widening strategy. (The result is irrelevant for this patch.)
* Then we determine if a computation is uniform within all lanes of VF. (Note this is the uniform-per-part definition, not LAI's uniform across all unrolled iterations definition.)
* If it is, we overrule the widening strategy, and unconditionally scalarize.
* VPReplicationRecipe - which is what actually does the scalarization - knows how to handle unform-per-part values including for scalable vectors. However, we do need to know that the expression is safe to execute without predication - e.g. the uniform mem op was unconditional in the original loop. (This part was split off and already landed.)
An obvious question is why not simply implement the generic case? The answer is that I'm going to, but doing so without a canonicalization towards uniform causes regressions due to bad interaction with scalarization/uniformity of values feeding the uniform mem-op. This patch is needed to avoid those regressions.
Differential Revision: https://reviews.llvm.org/D130364
We call tail-call-elim near the beginning of the pipeline,
but that is too early to annotate calls that get added later.
In the motivating case from issue #47852, the missing 'tail'
on memset leads to sub-optimal codegen.
I experimented with removing the early instance of
tail-call-elim instead of just adding another pass, but that
appears to be slightly worse for compile-time:
+0.15% vs. +0.08% time.
"tailcall" shows adding the pass; "tailcall2" shows moving
the pass to later, then adding the original early pass back
(so 1596886802 is functionally equivalent to 180b0439dc ):
https://llvm-compile-time-tracker.com/index.php?config=NewPM-O3&stat=instructions&remote=rotateright
Note that there was an effort to split the tail call functionality
into 2 passes - that could help reduce compile-time if we find
that this change costs more in compile-time than expected based
on the preliminary testing:
D60031
Differential Revision: https://reviews.llvm.org/D130374
Currently we only call replaceLoopPHINodesWithPreheaderValues() if
optimizeLoopExits() replaces the exit with an unconditional exit.
However, it is very common that this already happens as part of
eliminateIVComparison(), in which case we're leaving behind the
dead header phi.
Tweak the early bailout for already-constant exits to also call
replaceLoopPHINodesWithPreheaderValues().
Differential Revision: https://reviews.llvm.org/D129214
Now that removeDeadRecipes can remove most dead recipes across a whole
VPlan, there is no need to first collect some dead instructions.
Instead removeDeadRecipes can simply clean them up.
Depends D127580.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D128408
D128820 stopped creating div/rem constant expressions by default;
this patch removes support for them entirely.
The getUDiv(), getExactUDiv(), getSDiv(), getExactSDiv(), getURem()
and getSRem() on ConstantExpr are removed, and ConstantExpr::get()
now only accepts binary operators for which
ConstantExpr::isSupportedBinOp() returns true. Uses of these methods
may be replaced either by corresponding IRBuilder methods, or
ConstantFoldBinaryOpOperands (if a constant result is required).
On the C API side, LLVMConstUDiv, LLVMConstExactUDiv, LLVMConstSDiv,
LLVMConstExactSDiv, LLVMConstURem and LLVMConstSRem are removed and
corresponding LLVMBuild methods should be used.
Importantly, this also means that constant expressions can no longer
trap! This patch still keeps the canTrap() method to minimize diff --
I plan to drop it in a separate NFC patch.
Differential Revision: https://reviews.llvm.org/D129148
This patch replaces the tight hard cut-off for the number of runtime
checks with a more accurate cost-driven approach.
The new approach allows vectorization with a larger number of runtime
checks in general, but only executes the vector loop (and runtime checks) if
considered profitable at runtime. Profitable here means that the cost-model
indicates that the runtime check cost + vector loop cost < scalar loop cost.
To do that, LV computes the minimum trip count for which runtime check cost
+ vector-loop-cost < scalar loop cost.
Note that there is still a hard cut-off to avoid excessive compile-time/code-size
increases, but it is much larger than the original limit.
The performance impact on standard test-suites like SPEC2006/SPEC2006/MultiSource
is mostly neutral, but the new approach can give substantial gains in cases where
we failed to vectorize before due to the over-aggressive cut-offs.
On AArch64 with -O3, I didn't observe any regressions outside the noise level (<0.4%)
and there are the following execution time improvements. Both `IRSmk` and `srad` are relatively short running, but the changes are far above the noise level for them on my benchmark system.
```
CFP2006/447.dealII/447.dealII -1.9%
CINT2017rate/525.x264_r/525.x264_r -2.2%
ASC_Sequoia/IRSmk/IRSmk -9.2%
Rodinia/srad/srad -36.1%
```
`size` regressions on AArch64 with -O3 are
```
MultiSource/Applications/hbd/hbd 90256.00 106768.00 18.3%
MultiSourc...ks/ASCI_Purple/SMG2000/smg2000 240676.00 257268.00 6.9%
MultiSourc...enchmarks/mafft/pairlocalalign 472603.00 489131.00 3.5%
External/S...2017rate/525.x264_r/525.x264_r 613831.00 630343.00 2.7%
External/S...NT2006/464.h264ref/464.h264ref 818920.00 835448.00 2.0%
External/S...te/538.imagick_r/538.imagick_r 1994730.00 2027754.00 1.7%
MultiSourc...nchmarks/tramp3d-v4/tramp3d-v4 1236471.00 1253015.00 1.3%
MultiSource/Applications/oggenc/oggenc 2108147.00 2124675.00 0.8%
External/S.../CFP2006/447.dealII/447.dealII 4742999.00 4759559.00 0.3%
External/S...rate/510.parest_r/510.parest_r 14206377.00 14239433.00 0.2%
```
Reviewed By: lebedev.ri, ebrevnov, dmgreen
Differential Revision: https://reviews.llvm.org/D109368
At the moment, the same VPlan can be used code generation of both the
main vector and epilogue vector loop. This can lead to wrong results, if
the plan is optimized based on the VF of the main vector loop and then
re-used for the epilogue loop.
One example where this is problematic is if the scalar loops need to
execute at least one iteration, e.g. due to interleave groups.
To prevent mis-compiles in the short-term, disable optimizing exit
conditions for VPlans when using epilogue vectorization. The proper fix
is to avoid re-using the same plan for both loops, which will require
support for cloning plans first.
Fixes#56319.
I looked at canonicalizing in the other direction, but that causes
many potential regressions and infinite loops because we already
(possibly wrongly) canonicalize "trunc X to i1" into an and+icmp.
This has a data layout restriction to avoid creating illegal
mask instructions, but we could remove that if we can show
that the backend can undo this when needed.
The motivating example from issue #56119 is modeled by the
PhaseOrdering test.
At the moment LoopVersioning is only created for inner-loop
vectorization. This patch moves it to LVP::execute, which means it will
also be added for epilogue vectorization. As a consequence, the proper
noalias metadata is now also added to epilogue vector loops.
LVer will be moved to VPTransformState as follow-up.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D127966
All information is already available in VPlan. Note that there are some
test changes, because we now can correctly look through instructions
like truncates to analyze the actual users.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123541
Try to simplify BranchOnCount to `BranchOnCond true` if TC <= UF * VF.
This is an alternative to D121899 which simplifies the VPlan directly
instead of doing so late in code-gen.
The potential benefit of doing this in VPlan is that this may help
cost-modeling in the future. The reason this is done in prepareToExecute
at the moment is that a single plan may be used for multiple VFs/UFs.
There are further simplifications that can be applied as follow ups:
1. Replace inductions with constants
2. Replace vector region with regular block.
Fixes#55354.
Depends on D126679.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D126680
When reassociating GEPs, we can only keep inbounds if both original
GEPs were inbounds, and their offsets have the same sign. For the
sake of simplicity, I only handle the case where both offsets are
non-negative here.
It would probably be fine to just not preserve inbounds at all here,
but as I don't see a compile-time impact for adding the
isKnownNonNegative() calls I went with this more conservative
approach.
Fixes https://github.com/llvm/llvm-project/issues/44206.
Differential Revision: https://reviews.llvm.org/D126687
Previously, `getRegUsageForType` was implemented using
`getTypeLegalizationCost`. `getRegUsageForType` is used by the loop
vectorizer to estimate the register pressure caused by using a vector
type. However, `getTypeLegalizationCost` currently only appears to
understand splitting and not scalarization, so significantly
underestimates the register requirements.
Instead, use `getNumRegisters`, which understands when scalarization
can occur (via computeRegisterProperties).
This was discovered while investigating D118979 (Set maximum VF with
shouldMaximizeVectorBandwidth), where under fixed-length 512-bit SVE the
loop vectorizer previously ends up costing an v128i1 as 2 v64i*
registers where it actually occupies 128 i32 registers.
I'm sending this patch early for comment, I'm still doing some sanity checking
with LNT. I note that getRegisterClassForType appears to return VectorRC even
though the type in question (large vNi1 types) end up occupying scalar
registers. That might be worth fixing too.
Differential Revision: https://reviews.llvm.org/D125918
This patch introduces a new VPLiveOut subclass of VPUser to model
exit values explicitly. The initial version handles exit values that
are neither part of induction or reduction chains nor first order
recurrence phis.
Fixes#51366, #54867, #55167, #55459
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123537
At the moment LV runs LoopSimplify and reconstructs LCSSA form after
generating the main vector loop and before generating the epilogue
vector loop.
In practice, this adds a new exit block for the scalar loop because the
middle block now also branches to the original exit block of the scalar
loop. It also requires adding a new LCSSA phi in the newly created exit
block.
This complicates things when modeling exit values in VPlan, because we
would need to update the VPlan for the epilogue loop to update the newly
created LCSSA phi node.
But none of that should be necessary, as all analysis requiring
loop-simplify form is already done at this point and LCSSA form of the
original loop is not broken.
Reviewed By: bmahjour
Differential Revision: https://reviews.llvm.org/D125810
This patch adds initial support for a pointer diff based runtime check
scheme for vectorization. This scheme requires fewer computations and
checks than the existing full overlap checking, if it is applicable.
The main idea is to only check if source and sink of a dependency are
far enough apart so the accesses won't overlap in the vector loop. To do
so, it is sufficient to compute the difference and compare it to the
`VF * UF * AccessSize`. It is sufficient to check
`(Sink - Src) <u VF * UF * AccessSize` to rule out a backwards
dependence in the vector loop with the given VF and UF. If Src >=u Sink,
there is not dependence preventing vectorization, hence the overflow
should not matter and using the ULT should be sufficient.
Note that the initial version is restricted in multiple ways:
1. Pointers must only either be read or written, by a single
instruction (this allows re-constructing source/sink for
dependences with the available information)
2. Source and sink pointers must be add-recs, with matching steps
3. The step must be a constant.
3. abs(step) == AccessSize.
Most of those restrictions can be relaxed in the future.
See https://github.com/llvm/llvm-project/issues/53590.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D119078
With opaque pointers, both the stored value and the address can be the
same. Only consider the recipe using the first lane only *if* the
address is not stored.
Fixes#55375.
Based off the script from D103695, we were exaggerating the cost of the OR(AND(X,M),AND(Y,~M)) expansion using instruction count instead of effective throughput
This patch extends the scope of VPlan to also model the pre-header.
The pre-header can be used to place recipes that should be code-gen'd
outside the loop, like SCEV expansion.
Depends on D121623.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D121624
During skeleton construction for the epilogue vector loop, generic
helpers use getOrCreateTripCount, which will re-expand the trip count
computation. Instead, re-use the TripCount created during main loop
vectorization.
In some case, like in the added test case, we can reach
selectInterleaveCount with loops that actually have a cost of 0.
Unfortunately a loop cost of 0 is also used to communicate that the cost
has not been computed yet. To resolve the crash, bail out if the cost
remains zero after computing it.
This seems like the best option, as there are multiple code paths that
return a cost of 0 to force a computation in selectInterleaveCount.
Computing the cost at multiple places up front there would unnecessarily
complicate the logic.
Fixes#54413.
This patch tries to sink instructions when they are only used in a successor block.
This is a further enhancement patch based on Anna's commit:
D109700, which allows sinking an instruction having multiple uses in a single user.
In this patch, sink instructions with multiple users in a single successor block will be supported.
It could fix a known issue from rust:
https://github.com/rust-lang/rust/issues/51346#issuecomment-394443610
Reviewed By: nikic, reames
Differential Revision: https://reviews.llvm.org/D121585
This patch is a follow-up to D115953. It updates optimizeInductions
to also introduce new VPScalarIVStepsRecipes if an IV has both vector
and scalar uses.
It updates all uses that only need scalar values to use the newly
created recipe for the scalar steps.
This completes untangling of VPWidenIntOrFpInductionRecipe
code-generation. Now the recipe *only* creates the widened vector
values, as it says on the tin.
The code to genereate IR has been moved directly to
VPWidenIntOrFpInductionRecipe::execute.
Note that the recipe has been updated to hold a reference to
ScalarEvolution, which is needed to expand the step, until we can place
the corresponding SCEV expansion in the pre-header.
Depends on D120827.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D120828
The analysis passes output function name encapsulated in `'` braces,
but LV uses `"`. Harmonizing this may help in creating an update script
for the LV costmodel test checks.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D121105
The test used to run whole O3 pipeline. Modify it to contain LLVM IR right
before LV and limit passes to "-loop-vectorizer -simplifycfg".
For the RUN line with forced VF force interleave factor as well to simplify
CHECKs as interleaving isn't related to the purpose of the test.
I also tried to add "noalias" to pointer arguments in
@test_gather_not_profitable_pr48429 but LAI seems unable to use them.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D119786
This reverts the revert commit ff93260bf6.
The underlying issue causing the PPC bot failures has been fixed in
cbaac14734 and a corresponding test case has been added in
ad2cad1c52.
Original message:
This patch adds a new VPScalarIVStepsRecipe to handle building scalar
steps.
In the first patch, it only handles the case where there is no vector
induction variable needed.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D115953
Simon Pilgrim