When we sort entries for attempting to reorder scalars, need to use
actual vectorization factor, not the number of scalars. Otherwise the
compiler crashes, if the scalars has to be reordered.
Differential Revision: https://reviews.llvm.org/D138819
If left unchecked, the SLPVecrtorizer can move loads/stores below a stackrestore. The move can cause issues if the loads/stores have pointer operands from `alloca`s that are reset by the stackrestores. This patch adds the dependency check.
The check is conservative, in that it does not check if the pointer operands of the loads/stores are actually from `alloca`s that may be reset. We did not observe any SPECCPU2017 performance degradation so this simple fix seems sufficient.
The test could have been added to `llvm/test/Transforms/SLPVectorizer/X86/stacksave-dependence.ll`, but that test has not been updated to use opaque pointers. I am not inclined to add tests that still use typed pointers, or to refactor `llvm/test/Transforms/SLPVectorizer/X86/stacksave-dependence.ll` to use opaque pointers in this patch. If desired, I will open a different patch to refactor and consolidate the tests.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D138585
extractelements.
If the resulting type is going to be scalarized, no need to adjust the
cost of removed extractelement and insert/extract subvector costs.
Otherwise, the compiler can crash because of the wrong type sizes.
Need to count the reduced values, vectorized in the tree but not in the top node. Such scalars still must be extracted out of the vector node instead of the original scalar.
If same instruction is reduced several times, but in one graph is part
of buildvector sequence and in another it is vectorized, we may loose
information that it was part of buildvector and must be extracted from
later vectorized value.
If the graph is only the buildvector node without main operation, need
to inherit insrtpoint from the redution instruction. Otherwise the
compiler crashes trying to insert instruction at the entry block.
Need to use advanced check for the same vectorized node to avoid
possible compiler crash. We may have 2 similar nodes (vector one and
gather) after graph nodes rotation, need to do extra checks for the
exact match.
All of our insert/extract ops work on 128-bit lanes.
For `Insert`, we need to extract affected 128-bit lane,
unless it's being fully overwritten (FIXME: do we need to be
careful about legalization-induced padding that we obviously don't demand?),
perform insertions, and then insert the 128-bit lane back.
But hold on. If we are operating on an 256-bit legal vector,
and thus have two 128-bit subvectors, and are fully overwriting them both,
we don't actually need to insert *both* subvectors,
only the second one, into the implicitly-widened first one.
Also, `Insert` wasn't actually querying the costs,
but just assuming them to be `1`.
`getShuffleCost(TTI::SK_ExtractSubvector)` notes:
```
// Note that in general, the insertion starting at the beginning of a vector
// isn't free, because we need to preserve the rest of the wide vector.
```
... so as far as i can tell, we didn't account for that.
I was hoping this would allow vectorization at a higher VF at one case i looked at,
but the subvector insertion cost is still dis-advising that.
The change for `Extract` is NFC, and is for consistency only,
i wanted to get rid of of that weird explicit discounting of insertion of 0'th element,
since the general code should already deal with that.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D137913
Gather nodes are vectorized as simply vector of the scalars instead of
relying on the actual node. It leads to the fact that in some cases
we may miss incorrect transformation (non-matching set of scalars is
just ended as a gather node instead of possible vector/gather node).
Better to rely on the actual nodes, it allows to improve stability and
better detect missed cases.
Differential Revision: https://reviews.llvm.org/D135174
Need to check if the insertelement mask size is reached during cost analysis to avoid compiler crash.
Differential Revision: https://reviews.llvm.org/D137639
Gather nodes are vectorized as simply vector of the scalars instead of
relying on the actual node. It leads to the fact that in some cases
we may miss incorrect transformation (non-matching set of scalars is
just ended as a gather node instead of possible vector/gather node).
Better to rely on the actual nodes, it allows to improve stability and
better detect missed cases.
Differential Revision: https://reviews.llvm.org/D135174
Generalized the cost model estimation. Improved cost model estimation
for repeated scalars (no need to count their cost anymore), improved
cost model for extractelement instructions.
cpu2017
511.povray_r 0.57
520.omnetpp_r -0.98
521.wrf_r -0.01
525.x264_r 3.59 <+
526.blender_r -0.12
531.deepsjeng_r -0.07
538.imagick_r -1.42
Geometric mean: 0.21
Differential Revision: https://reviews.llvm.org/D115757
Generalized the cost model estimation. Improved cost model estimation
for repeated scalars (no need to count their cost anymore), improved
cost model for extractelement instructions.
cpu2017
511.povray_r 0.57
520.omnetpp_r -0.98
521.wrf_r -0.01
525.x264_r 3.59 <+
526.blender_r -0.12
531.deepsjeng_r -0.07
538.imagick_r -1.42
Geometric mean: 0.21
Differential Revision: https://reviews.llvm.org/D115757
When generating masked gathers nodes, SLP vectorizer accounts the cost
of the GEPs for loads as part of the scalar-vector transformation cost
estimation. But it does not do it for vectorized loads/stores, while it
may completely remove some of the GEPs completely. Because of this in
some cases masked gather operation can be much more profitable rather
than regular vectorization (masked-gather cost + vector GEP - scalar
loads + GEPs comparing to vectorized loads - scalar loads).
Added the analysis of the removed scalarGEPs for vectorized load/store nodes for better cost estimation.
Differential Revision: https://reviews.llvm.org/D135282
Need to set the insertpoint for extractelement to point to the first
instruction in the node to avoid possible crash during external uses
combine process. Without it we may endup with the incorrect
transformation.
Differential Revision: https://reviews.llvm.org/D135591
Freeze instruction in some cases makes codegen worse, so need to be very
careful when emitting it. Instead improve analysis in isUndefVector
function to generate mask of unused elements and use it in the analysis.
Differential Revision: https://reviews.llvm.org/D135382
Added analysis for invariant extractelement instructions and improved
detection of the CSE blocks for generated extractelement instructions.
Differential Revision: https://reviews.llvm.org/D135279
In the canonical form of the shuffle the poison/undef operand is the
second operand, the patch tries to emit canonical form for partial
vectorization of the buildvector sequence.
Also, this patch starts emitting freeze instruction for shuffles with undef indices if the second shuffle operan is undef, not poison. It is an initial step to D93818, where undef mask element are treated as returning poison value.
Differential Revision: https://reviews.llvm.org/D134377
Revert rGef89409a59f3b79ae143b33b7d8e6ee6285aa42f "Fix 'unused-lambda-capture' gcc warning. NFCI."
Revert rG926ccfef032d206dcbcdf74ca1e3a9ebf4d1be45 "[SLP] ScalarizationOverheadBuilder - demand all elements for scalarization if the extraction index is unknown / out of bounds"
Revert ScalarizationOverheadBuilder sequence from D134605 - when accumulating extraction costs by Type (instead of specific Value), we are not distinguishing enough when they are coming from the same source or not, and we always just count the cost once. This needs addressing before we can use getScalarizationOverhead properly.
This change updates the costs to make constant pool loads match their actual cost, and adds the broadcast special case to avoid too many regressions. We really need more information about the constants being rematerialized, but this is an incremental improvement.
Differential Revision: https://reviews.llvm.org/D134746
Instead of accumulating all extraction costs separately and then adjusting for repeated subvector extractions, this patch collects all the extractions and then converts to calls to getScalarizationOverhead to improve the accuracy of the costs.
I'm not entirely satisfied with the getExtractWithExtendCost handling yet - this still just adds all the getExtractWithExtendCost costs together - it really needs to be replaced with a "getScalarizationOverheadWithExtend", but that will require further refactoring first.
This replaces my initial attempt in D124769.
Differential Revision: https://reviews.llvm.org/D134605
The mul by constant costmodels handle power-of-2 constants, but not negated-power-of-2, despite the backends handling both.
This patch adds the OperandValueProperties::OP_NegatedPowerOf2 enum and wires it for use for basic mul cost analysis and SLP handling.
Fixes#50778
Differential Revision: https://reviews.llvm.org/D111968
This is the first patch in a series intended for removing flag
-enable-new-pm=0 from lit tests. This is part of a bigger
effort of completely removing legacy code related to legacy
pass manager in favor of currently default new pass manager.
In this patch flag has been removed only from tests where no significant
change has been required because checks has been duplicated for
both PMs.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D134150
Alexey Bataev