TransferDbgValues (capital 'T') is wired into ReplaceAllUsesWith, and
transferDbgValues (lowercase 't') is used elsewhere (e.g in Legalize).
Both functions should be doing the exact same thing. This patch
consolidates the logic into one place.
This was reverted in r318455 because some newly introduced asserts,
which I thought were NFC, were firing. I filed PR35338. For now I've
weakened the asserts.
Testing: check-llvm, check-clang, and a stage2 Rel+Deb build of clang
Differential Revision: https://reviews.llvm.org/D40104
llvm-svn: 318498
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
The sign extend might be from an i16 or i8 type and was inserted by InstCombine to match the pointer width. X86 gather legalization isn't currently detecting this to reinsert a sign extend to make things legal.
It's a bit weird for the SelectionDAGBuilder to do this kind of optimization in the first place. With this removed we can at least lean on InstCombine somewhat to ensure the index is i32 or i64.
I'll work on trying to recover some of the test cases by removing sign extends in the backend when its safe to do so with an understanding of the current legalizer capabilities.
This should fix PR30690.
llvm-svn: 318466
TransferDbgValues (capital 'T') is wired into ReplaceAllUsesWith, and
transferDbgValues (lowercase 't') is used elsewhere (e.g in Legalize).
Both functions should be doing the exact same thing. This patch
consolidates the logic into one place.
Differential Revision: https://reviews.llvm.org/D40104
llvm-svn: 318448
SelectionDAGBuilder::visitAlloca assumes alloca address space is 0, which is
incorrect for triple amdgcn---amdgiz and causes isel failure.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40095
llvm-svn: 318392
Change the calculation for the desired ValueType for non-sign
extending loads, as in those cases we don't care about the
higher bits. This creates a smaller ExtVT and allows for such
combinations as:
(srl (zextload i16, [addr]), 8) -> (zextload i8, [addr + 1])
Differential Revision: https://reviews.llvm.org/D40034
llvm-svn: 318390
The LatencyPriorityQueue doesn't currently check whether the SU being removed really exists in the Queue.
This method fails quietly when SU is not found and removes the last element from the Queue, leading to unexpected behavior.
Unfortunately, this only occurs on our custom target, with the custom scheduler. In our case, when remove() is invoked, it removes the wrong SU at the end of the Queue, which is only discovered later when VerifyScheduledDAG() is invoked and finds that some nodes were not scheduled at all.
As this is only reproducible with a lot of proprietary code, I'm hopeful this assert is straightforward enough to not necessitate a test.
Patch by Ondrej Glasnak!
Differential Revision: https://reviews.llvm.org/D40084
llvm-svn: 318387
Summary:
Use use_nodbg_empty() rather than use_empty() in
MachineRegisterInfo::EmitLiveInCopies() when determining if a livein
register has any uses or not. Otherwise a single dbg.value can make us
generate different code, meaning -g would affect code generation.
Found when compiling code for my out-of-tree target. Unfortunately I
haven't been able to reproduce the problem on X86 or any of the other
in-tree targets that I tried, so no test case.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39044
llvm-svn: 318382
For example, this is currently reachable by X86 if you use a masked store intrinsic with a v1iX type.
Using a fatal error seems like a better user experience if someone were to encounter this on a release build. There are several other similar places that have been converted from unreachable to fatal error previously.
llvm-svn: 318379
processDbgDeclares assumes pointer size is the same for different addr spaces.
It uses pointer size for addr space 0 for all pointers, which causes assertion
in stripAndAccumulateInBoundsConstantOffsets for amdgcn---amdgiz since
pointer in addr space 5 has different size than in addr space 0.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40085
llvm-svn: 318370
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Due to integer precision, we might have numerator greater than denominator in
the branch probability scaling. Add a check to prevent this from happening.
llvm-svn: 318353
In constructAbstractSubprogramScopeDIE there can be a potential mismatch
between `this` and the CU of ContextDIE when a scope is shared between
two DISubprograms belonging to a different CU. In that case, `this` is
the CU that was specified in the IR, but the CU of ContextDIE is that of
the first subprogram that was emitted. This patch fixes the mismatch by
looking up the CU of ContextDIE, and switching to use that.
This fixes PR35212 (https://bugs.llvm.org/show_bug.cgi?id=35212)
Patch by Philip Craig!
Differential revision: https://reviews.llvm.org/D39981
llvm-svn: 318289
artifacts along with DCE
Legalization Artifacts are all those insts that are there to make the
type system happy. Currently, the target needs to say all combinations
of extends and truncs are legal and there's no way of verifying that
post legalization, we only have *truly* legal instructions. This patch
changes roughly the legalization algorithm to process all illegal insts
at one go, and then process all truncs/extends that were added to
satisfy the type constraints separately trying to combine trivial cases
until they converge. This has the added benefit that, the target
legalizerinfo can only say which truncs and extends are okay and the
artifact combiner would combine away other exts and truncs.
Updated legalization algorithm to roughly the following pseudo code.
WorkList Insts, Artifacts;
collect_all_insts_and_artifacts(Insts, Artifacts);
do {
for (Inst in Insts)
legalizeInstrStep(Inst, Insts, Artifacts);
for (Artifact in Artifacts)
tryCombineArtifact(Artifact, Insts, Artifacts);
} while(!Insts.empty());
Also, wrote a simple wrapper equivalent to SetVector, except for
erasing, it avoids moving all elements over by one and instead just
nulls them out.
llvm-svn: 318210
This patch peels off the top case in switch statement into a branch if the
probability exceeds a threshold. This will help the branch prediction and
avoids the extra compares when lowering into chain of branches.
Differential Revision: http://reviews.llvm.org/D39262
llvm-svn: 318202
Clang implements the -finstrument-functions flag inherited from GCC, which
inserts calls to __cyg_profile_func_{enter,exit} on function entry and exit.
This is useful for getting a trace of how the functions in a program are
executed. Normally, the calls remain even if a function is inlined into another
function, but it is useful to be able to turn this off for users who are
interested in a lower-level trace, i.e. one that reflects what functions are
called post-inlining. (We use this to generate link order files for Chromium.)
LLVM already has a pass for inserting similar instrumentation calls to
mcount(), which it does after inlining. This patch renames and extends that
pass to handle calls both to mcount and the cygprofile functions, before and/or
after inlining as controlled by function attributes.
Differential Revision: https://reviews.llvm.org/D39287
llvm-svn: 318195
Summary:
Bypass of slow divs based on operand values is currently disabled for
-Os. Do the same when profile summary is available and the working set
size of the application is huge. This is similar to how loop peeling is
guarded by hasHugeWorkingSetSize. In the div bypass case, the generated
extra code (and the extra branch) tendss to outweigh the benefits of the
bypass. This results in noticeable performance improvement on an
internal application.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39992
llvm-svn: 318179
TargetLowering::LowerCallTo assumes that sret value type corresponds to a
pointer in default address space, which is incorrect, since sret value type
should correspond to a pointer in alloca address space, which may not
be the default address space. This causes assertion for amdgcn target
in amdgiz environment.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D39996
llvm-svn: 318167
For now at least. We clearly need some kind of comdat or
linkonce_odr support for wasm but currently COMDAT is not
supported.
Disable COMDAT support in the same way we do the Mach-O. This
also causes clang not to generated COMDATs.
Differential Revision: https://reviews.llvm.org/D39873
llvm-svn: 318123
CodeGenPrepare sinks address computations from one basic block to another
and attempts to reuse address computations that have already been sunk. If
the same address computation appears twice with the first instance as an
operand of a load whose result is an operand to a simplifable select,
CodeGenPrepare simplifies the select and recursively erases the now dead
instructions. CodeGenPrepare then attempts to use the erased address
computation for the second load.
Fix this by erasing the cached address value if it has zero uses before
looking for the address value in the sunken address map.
This partially resolves PR35209.
Thanks to Alexander Richardson for reporting the issue!
Reviewers: john.brawn
Differential Revision: https://reviews.llvm.org/D39841
llvm-svn: 318032
Allow a pattern rewriter to be installed in CodeGenDAGPatterns and use it to
correct situations where SelectionDAG and GlobalISel disagree on
representation. For example, it would rewrite:
(sextload:i32 $ptr)<<unindexedload>><<sextload>><<sextloadi16>
to:
(sext:i32 (load:i16 $ptr)<<unindexedload>>)
I'd have preferred to replace the fragments and have the expansion happen
naturally as part of PatFrag expansion but the type inferencing system can't
cope with loads of types narrower than those mentioned in register classes.
This is because the SDTCisInt's on the sext constrain both the result and
operand to the 'legal' integer types (where legal is defined as 'a register
class can contain the type') which immediately rules the narrower types out.
Several targets (those with only one legal integer type) would then go on to
crash on the SDTCisOpSmallerThanOp<> when it removes all the possible types
for the result of the extend.
Also, improve isObviouslySafeToFold() slightly to automatically return true for
neighbouring instructions. There can't be any re-ordering problems if
re-ordering isn't happenning. We'll need to improve it further to handle
sign/zero-extending loads when the extend and load aren't immediate neighbours
though.
llvm-svn: 317971
This is a fix for a bug in r317947. We were supposed to check that all the indices are are constant 0, but instead we're only make sure that indices that are constant are 0. Non-constant indices are being ignored.
llvm-svn: 317950
Currently we can only get a uniform base from a simple GEP with 2 operands. This causes us to miss address folding opportunities for simple global array accesses as the test case shows.
This patch adds support for larger GEPs if the other indices are 0 since those don't require any additional computations to be inserted.
We may also want to handle constant splats of zero here, but I'm leaving that for future work when I have a real world example.
Differential Revision: https://reviews.llvm.org/D39911
llvm-svn: 317947
Summary:
The associated debug value is updated when the virtual source register
of a copy is completely eliminated and replaced with a rematerialize
value in the defed register of the copy. As the debug value now is
associated with another register it also need to be moved, otherwise
the debug value isn't valid.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: MatzeB, llvm-commits, qcolombet
Differential Revision: https://reviews.llvm.org/D38024
llvm-svn: 317880
* The method getRegAllocationHints() is now of bool type instead of void. If
true is returned, regalloc (AllocationOrder) will *only* try to allocate the
hints, as opposed to merely trying them before non-hinted registers.
* TargetRegisterInfo::getRegAllocationHints() is implemented for SystemZ with
an increase in number of LOCRs.
In this case, it is desired to force the hints even though there is a slight
increase in spilling, because if a non-hinted register would be allocated,
the LOCRMux pseudo would have to be expanded with a jump sequence. The LOCR
(Load On Condition) SystemZ instruction must have both operands in either the
low or high part of the 64 bit register.
Reviewers: Quentin Colombet and Ulrich Weigand
https://reviews.llvm.org/D36795
llvm-svn: 317879
Summary: This fixes failure in CodeGen/AArch64/global-merge-group-by-use.ll uncovered by D39245.
Reviewers: ab, asl
Reviewed By: ab
Subscribers: aemerson, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D39635
llvm-svn: 317817
In Rust, a trait can be implemented for any type, and if a trait
object pointer is used for the type, then a virtual table will be
emitted for that trait/type combination.
We would like debuggers to be able to inspect trait objects, which
requires finding the concrete type associated with a given vtable.
This patch changes LLVM so that any type can be passed to
replaceVTableHolder. This allows the Rust compiler to emit the needed
debug info -- associating a vtable with the concrete type for which it
was emitted.
This is a DWARF extension: DWARF only specifies the meaning of
DW_AT_containing_type in one specific situation. This style of DWARF
extension is routine, though, and LLVM already has one such case for
DW_AT_containing_type.
Patch by Tom Tromey!
Differential Revision: https://reviews.llvm.org/D39503
llvm-svn: 317730
This patch implements Chandler's idea [0] for supporting languages that
require support for infinite loops with side effects, such as Rust, providing
part of a solution to bug 965 [1].
Specifically, it adds an `llvm.sideeffect()` intrinsic, which has no actual
effect, but which appears to optimization passes to have obscure side effects,
such that they don't optimize away loops containing it. It also teaches
several optimization passes to ignore this intrinsic, so that it doesn't
significantly impact optimization in most cases.
As discussed on llvm-dev [2], this patch is the first of two major parts.
The second part, to change LLVM's semantics to have defined behavior
on infinite loops by default, with a function attribute for opting into
potential-undefined-behavior, will be implemented and posted for review in
a separate patch.
[0] http://lists.llvm.org/pipermail/llvm-dev/2015-July/088103.html
[1] https://bugs.llvm.org/show_bug.cgi?id=965
[2] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118632.html
Differential Revision: https://reviews.llvm.org/D38336
llvm-svn: 317729
This reverts r317579, originally committed as r317100.
There is a design issue with marking CFI instructions duplicatable. Not
all targets support the CFIInstrInserter pass, and targets like Darwin
can't cope with duplicated prologue setup CFI instructions. The compact
unwind info emission fails.
When the following code is compiled for arm64 on Mac at -O3, the CFI
instructions end up getting tail duplicated, which causes compact unwind
info emission to fail:
int a, c, d, e, f, g, h, i, j, k, l, m;
void n(int o, int *b) {
if (g)
f = 0;
for (; f < o; f++) {
m = a;
if (l > j * k > i)
j = i = k = d;
h = b[c] - e;
}
}
We get assembly that looks like this:
; BB#1: ; %if.then
Lloh3:
adrp x9, _f@GOTPAGE
Lloh4:
ldr x9, [x9, _f@GOTPAGEOFF]
mov w8, wzr
Lloh5:
str wzr, [x9]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.lt LBB0_3
b LBB0_7
LBB0_2: ; %entry.if.end_crit_edge
Lloh6:
adrp x8, _f@GOTPAGE
Lloh7:
ldr x8, [x8, _f@GOTPAGEOFF]
Lloh8:
ldr w8, [x8]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.ge LBB0_7
LBB0_3: ; %for.body.lr.ph
Note the multiple .cfi_def* directives. Compact unwind info emission
can't handle that.
llvm-svn: 317726
Previously, hasSideEffects was ? for TargetOpcode::PHI and would be inferred
as 1. D37065 sets the previously inferred properties explicitly. This patch sets
hasSideEffects=0 for PHI, as it is for G_PHI. MachineInstr::isSafeToMove has
been updated so it still returns false for PHI.
Additionally, HexagonBitSimplify relied on a PHI node having the
hasUnmodeledSideEffects property. This patch fixes that assumption.
Differential Revision: https://reviews.llvm.org/D37097
llvm-svn: 317721
In 2010 a commit with no testcase and no further explanation
explicitly disabled the handling of inlined variables in
EmitFuncArgumentDbgValue(). I don't think there is a good reason for
this any more and re-enabling this adds debug locations for variables
associated with an LLVM function argument in functions that are
inlined into the first basic block. The only downside of doing this is
that we may insert a DBG_VALUE before the inlined scope, but (1) this
could be filtered out later, and (2) LiveDebugValues will not
propagate it into subsequent basic blocks if they don't dominate the
variable's lexical scope, so this seems like a small price to pay.
rdar://problem/26228128
llvm-svn: 317702
Some of the AMDGPU stack addressing modes require knowing the sign
bit is zero. We used to accomplish this by custom lowering
frame indexes, and then putting an AssertZext around a
TargetFrameIndex. This required specifically looking for
the AssextZext + frame index pattern which was moderately
disgusting. The same could probably be accomplished
with a target specific node, but would still
require special handling of frame indexes.
llvm-svn: 317671
This patch enables the folding of address computation in
memory instruction in case adress is represented by Phi node.
The inputs of Phi node might be different in base register.
Differential Revision: https://reviews.llvm.org/D36073
llvm-svn: 317665
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
Reland r317100 with minor fix regarding ComputeCommonTailLength function in
BranchFolding.cpp. Skipping top CFI instructions block needs to executed on
several more return points in ComputeCommonTailLength().
Original r317100 message:
"Correct dwarf unwind information in function epilogue for X86"
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
llvm-svn: 317579
Vedant Kumar