Add instruction patterns for matching load and store instructions with constant
offsets in addresses. The code is fairly redundant due to the need to replicate
everything between imm, tglobaldadr, and texternalsym, but this appears to be
common tablegen practice. The main alternative appears to be to introduce
matching functions with C++ code, but sticking with purely generated matchers
seems better for now.
Also note that this doesn't yet support offsets from getelementptr, which will
be the most common case; that will depend on a change in target-independent code
in order to set the NoUnsignedWrap flag, which I'll submit separately. Until
then, the testcase uses ptrtoint+add+inttoptr with a nuw on the add.
Also implement isLegalAddressingMode with an approximation of this.
Differential Revision: http://reviews.llvm.org/D15538
llvm-svn: 255681
Add return type information to call and call_indirect instructions. This
allows them to be disambiguated without knowledge of the callee.
Differential Revision: http://reviews.llvm.org/D15484
llvm-svn: 255565
Implement a new BLOCK scope placement algorithm which better handles
early-return blocks and early exists from nested scopes.
Differential Revision: http://reviews.llvm.org/D15368
llvm-svn: 255564
The WebAssemblyStoreResults pass runs before LiveVariables, so it doesn't
expect to have to keep dead flags up to date; check this with an assert.
llvm-svn: 255551
Many tests are now passing due to eliminateFrameIndex implementation and
the list needs to be re-triaged because it unblocks other failures, and
some previous failures are different. However I'm about to churn it more
by implementing more lowering, so will wait on that.
llvm-svn: 255396
Summary:
Use the SP32 physical register as the base for FrameIndex
lowering. Update it and the __stack_pointer global var in the prolog and
epilog. Extend the mapping of virtual registers to wasm locals to
include the physical registers.
Rather than modify the target-independent PrologEpilogInserter (which
asserts that there are no virtual registers left) include a
slightly-modified copy for Wasm that does not have this assertion and
only clears the virtual registers if scavenging was needed (which of
course it isn't for wasm).
Differential Revision: http://reviews.llvm.org/D15344
llvm-svn: 255392
Summary:
ADJCALLSTACK{DOWN,UP} (aka CALLSEQ_{START,END}) MIs are supposed to use
and def the stack pointer. Since they do not, all the nodes are being
eliminated by DeadMachineInstructionElim, so they aren't in the IR when
PrologEpilogInserter/eliminateCallFramePseudo needs them.
This change fixes that, but since RegStackify will not stackify across
them (and it runs early, before PEI), change LowerCall to only emit them
when the call frame size is > 0. That makes the current code work the
same way and makes code handled by D15344 also work the same way. We can
expand the condition beyond NumBytes > 0 in the future if needed.
Reviewers: sunfish, jfb
Subscribers: jfb, dschuff, llvm-commits
Differential Revision: http://reviews.llvm.org/D15459
llvm-svn: 255356
ISD::FCOPYSIGN permits its operands to have differing types, and DAGCombiner
uses this. Add some def : Pat rules to expand this out into an explicit
conversion and a normal copysign operation.
llvm-svn: 255220
Reinteroduce the code for moving ARGUMENTS back to the top of the basic block.
While the ARGUMENTS physical register prevents sinking and scheduling from
moving them, it does not appear to be sufficient to prevent SelectionDAG from
moving them down in the initial schedule. This patch introduces a patch that
moves them back to the top immediately after SelectionDAG runs.
This is still hopefully a temporary solution. http://reviews.llvm.org/D14750 is
one alternative, though the review has not been favorable, and proposed
alternatives are longer-term and have other downsides.
This fixes the main outstanding -verify-machineinstrs failures, so it adds
-verify-machineinstrs to several tests.
Differential Revision: http://reviews.llvm.org/D15377
llvm-svn: 255125
The bots are now running the torture tests properly. Bin all failures from the GCC C torture tests so that we can tackle failures and make the tree go red on regressions.
llvm-svn: 255111
This patch introduces a codegen-only instruction currently named br_unless,
which makes it convenient to implement ReverseBranchCondition and re-enable
the MachineBlockPlacement pass. Then in a late pass, it lowers br_unless
back into br_if.
Differential Revision: http://reviews.llvm.org/D14995
llvm-svn: 254826
Add physical register defs to instructions used from stackified
instructions to prevent them from being scheduled into the middle of
a stack sequence. This is a conservative measure which may be loosened
in the future.
Differential Revision: http://reviews.llvm.org/D15252
llvm-svn: 254811
This is just prototype for load/store for i32 types. I'll add them to
the rest of the types if we like this direction.
Differential Revision: http://reviews.llvm.org/D15197
llvm-svn: 254807
Full varargs support will depend on prologue/epilogue support, but this patch
gets us started with most of the basic infrastructure.
Differential Revision: http://reviews.llvm.org/D15231
llvm-svn: 254799
When a block has no terminator instructions, getFirstTerminator() returns
end(), which can't be used in dominance checks. Check dominance for phi
operands separately.
Also, remove some bits from WebAssemblyRegStackify.cpp that were causing
trouble on the same testcase; they were left behind from an earlier
experiment.
Differential Revision: http://reviews.llvm.org/D15210
llvm-svn: 254662
If virtual registers are created late, mappings to WebAssembly
registers need to be added explicitly. This patch adds a function
to do so and teaches WebAssemblyPeephole to use it. This fixes
an out-of-bounds access on the WARegs vector.
llvm-svn: 254094
Instead of trying to move ARGUMENT instructions back up to the top after
they've been scheduled or sunk down, use a fake physical register to
create a liveness constraint that prevents ARGUMENT instructions from
moving down in the first place. This is still not entirely ideal, however
it is more robust than letting them move and moving them back.
llvm-svn: 254084
With the '=' suffix now indicating which operands are output operands, it's
no longer as important to distinguish between a call's inputs and its outputs
using operand ordering, so we can go back to printing them in the normal order.
llvm-svn: 253925
This distinguishes input operands from output operands. This is something of
a syntactic experiment to see whether the mild amount of clutter this adds is
outweighed by the extra information it conveys to the reader.
llvm-svn: 253922
The current approach to using get_local and set_local is to use them
implicitly, as register uses and defs. Introduce new copy instructions
which are themselves no-ops except for the get_local and set_local
that they imply, so that we use get_local and set_local consistently.
llvm-svn: 253905
WebAssembly is currently using labels to end scopes, so for example a
loop scope looks like this:
BB0_0:
loop BB0_1
...
BB0_1:
with BB0_0 being the label of the first block not in the loop. This
requires that the label be printed even when it's only reachable via
fallthrough. To arrange this, insert a no-op LOOP_END instruction in
such cases at the end of the loop.
llvm-svn: 253901
Always starting blocks at the top of their containing loops works, but creates
unnecessarily deep nesting because it makes all blocks in a loop overlap.
Refine the BLOCK placement algorithm to start blocks at nearest common
dominating points instead, which significantly shrinks them and reduces
overlapping.
llvm-svn: 253876
WebAssembly does not have physical registers, so even if LLVM uses physical
registers like SP, they'll need to be lowered to virtual registers before
AsmPrinter time.
llvm-svn: 253644
coloring pass. Turn the logic into "look for an insert point and
then move things past the insert point".
No functional change intended.
llvm-svn: 253626
This also takes the push/pop syntax another step forward, introducing stack
slot numbers to make it easier to see how expressions are connected. For
example, the value pushed in $push7 is popped in $pop7.
And, this begins an experiment with making get_local and set_local implicit
when an operation directly uses or defines a register. This greatly reduces
clutter. If this experiment succeeds, it may make sense to do this for
const instructions as well.
And, this introduces more special code for ARGUMENTS; hopefully this code
will soon be obviated by proper support for live-in virtual registers.
llvm-svn: 253465
This was regressed in r252656 which wasn't quite NFC. Instead of using a
custom instruction as before, use a pattern to select CONST_I32 for the
global addrs.
Differential Revision: http://reviews.llvm.org/D14587
llvm-svn: 253276
Summary:
Previously return type information for a function was derived from
return dag nodes. But this didn't work for dags with != return node. So
instead compute it directly from the LLVM function as is done for imports.
Differential Revision: http://reviews.llvm.org/D14593
llvm-svn: 253251
Summary: This is to match the new version in the spec
Reviewers: sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D14519
llvm-svn: 253249
This arranges the types in the LLVM instruction names in the same order that
they appear in the WebAssembly opcode names, and eliminates
double-underscores.
llvm-svn: 252988
Switch to MC for instruction printing.
This encompasses several changes which are all interconnected:
- Use the MC framework for printing almost all instructions.
- AsmStrings are now live.
- This introduces an indirection between LLVM vregs and WebAssembly registers,
and a new pass, WebAssemblyRegNumbering, for computing a basic the mapping.
This addresses some basic issues with argument registers and unused registers.
- The way ARGUMENT instructions are handled no longer generates redundant
get_local+set_local for every argument.
This also changes the assembly syntax somewhat; most notably, MC's printing
does not use sigils on label names, so those are no longer present, and
push/pop now have a sigil to keep them unambiguous.
The usage of set_local/get_local/$push/$pop will continue to evolve
significantly. This patch is just one step of a larger change.
llvm-svn: 252910
This encompasses several changes which are all interconnected:
- Use the MC framework for printing almost all instructions.
- AsmStrings are now live.
- This introduces an indirection between LLVM vregs and WebAssembly registers,
and a new pass, WebAssemblyRegNumbering, for computing a basic the mapping.
This addresses some basic issues with argument registers and unused registers.
- The way ARGUMENT instructions are handled no longer generates redundant
get_local+set_local for every argument.
This also changes the assembly syntax somewhat; most notably, MC's printing
use sigils on label names, so those are no longer present, and push/pop now
have a sigil to keep them unambiguous.
The usage of set_local/get_local/$push/$pop will continue to evolve
significantly. This patch is just one step of a larger change.
llvm-svn: 252858
Lower LLVM's 'unreachable' terminator to ISD::TRAP, and lower ISD::TRAP to
wasm's 'unreachable' expression.
WebAssembly type-checks expressions, but a noreturn function with a
return type that doesn't match the context will cause a check
failure. So we lower LLVM 'unreachable' to ISD::TRAP and then lower that
to WebAssembly's 'unreachable' expression, which typechecks in any
context and causes a trap if executed.
Differential Revision: http://reviews.llvm.org/D14515
llvm-svn: 252566
Modelling of the expression stack is evolving. This patch takes another
step by making pushes explicit.
Differential Revision: http://reviews.llvm.org/D14338
llvm-svn: 252334
Mangling type information into MachineInstr opcode names was a temporary
measure, and it's starting to get hairy. At the same time, the MC instruction
printer wants to use AsmString strings for printing. This patch takes the
first step, starting the process of adding AsmStrings for instructions.
llvm-svn: 252203
Summary:
Add support for wasm's select operator, and lower LLVM's select DAG node
to it.
Reviewers: sunfish
Subscribers: dschuff, llvm-commits, jfb
Differential Revision: http://reviews.llvm.org/D14295
llvm-svn: 252002
Summary:
Conversion opcode name format should be f64.convert_u/i64 not f64_convert_u
Author: s3ththompson
Reviewers: jfb
Subscribers: sunfish, jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D14160
llvm-svn: 251613
C/C++ code can declare an extern function, which will show up as an import in WebAssembly's output. It's expected that the linker will resolve these, and mark unresolved imports as call_import (I have a patch which does this in wasmate).
llvm-svn: 250875
Summary:
This is a temporary hack until we get around to remapping the vreg
numbers to local numbers. Dead vregs cause bad numbering and make
consumers sad.
We could also just look at debug info an use named locals instead, but
vregs have to work properly anyways so there!
Reviewers: binji, sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13839
llvm-svn: 250594
Summary: The syntax has changed a bit recently.
Reviewers: binji
Subscribers: llvm-commits, jfb, sunfish, dschuff
Differential Revision: http://reviews.llvm.org/D13821
llvm-svn: 250535
Summary: Make the relooper an analysis pass, to convert CFG to AST.
Reviewers: sunfish
Subscribers: jfb, dschuff
Differential Revision: http://reviews.llvm.org/D12744
llvm-svn: 250524
Summary:
Follow the same syntax as for the spec repo. Both have evolved slightly
independently and need to converge again.
This, along with wasmate changes, allows me to do the following:
echo "int add(int a, int b) { return a + b; }" > add.c
./out/bin/clang -O2 -S --target=wasm32-unknown-unknown add.c -o add.wack
./experimental/prototype-wasmate/wasmate.py add.wack > add.wast
./sexpr-wasm-prototype/out/sexpr-wasm add.wast -o add.wasm
./sexpr-wasm-prototype/third_party/v8-native-prototype/v8/v8/out/Release/d8 -e "print(WASM.instantiateModule(readbuffer('add.wasm'), {print:print}).add(42, 1337));"
As you'd expect, the d8 shell prints out the right value.
Reviewers: sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13712
llvm-svn: 250480
This new syntax is built around putting each instruction on its own line
in a "mnemonic op, op, op" like syntax. It also uses conventional data
section directives like ".byte" and so on rather than requiring everything
to be in hierarchical S-expression format. This is a more natural syntax
for a ".s" file format from the perspective of LLVM MC and related tools,
while remaining easy to translate into other forms as needed.
llvm-svn: 249364
Derek Schuff