Follow up to D15378, added INSERTPS to the list of decodable target shuffles and enabled XFormVExtractWithShuffleIntoLoad to handle target shuffles with SentinelZero and tested this with INSERTPS.
llvm-svn: 257046
getTargetShuffleMask may return shuffle masks with SM_SentinelZero (-2) values (currently just for PSHUFB but VPERM2X128 as well with this patch). Although some calling functions can make use of this (mainly for shuffle combining), others can not and their inclusion makes shuffle mask comparisons more difficult.
This patch adds a flag to getTargetShuffleMask to indicate if the calling function can't handle SM_SentinelZero; getTargetShuffleMask will then return false if it occurs to make handling much easier.
I've tidied up some uses of getTargetShuffleMask to better indicate what is going on - more could be done but at present I don't have test cases to demonstrate it.
Some upcoming patches will make use of this to both support more uses where SM_SentinelZero is not permitted (e.g. combineShuffleToAddSub), and also will allow us to add INSERTPS support to getTargetShuffleMask as part of better zero handling discussed in D14261.
Differential Revision: http://reviews.llvm.org/D15378
llvm-svn: 256992
As discussed on D15378, move the mask.empty() tests to after the switch statement and consider any shuffle decode where the extracted target shuffle mask is empty as a failure.
llvm-svn: 256921
We queried hasFP before we hit ExpandISelPseudos. ExpandISelPseudos
manipulated state that hasFP relied on, potentially changing the result
after it has been queried elsewhere.
While I am not aware of any particular bug due to this state of affairs,
it seems best to avoid it entirely by changing the state during DAG
construction.
llvm-svn: 256849
PBLEND/BLENDPD/BLENDPS are no different to the other target shuffles and this will make future improvements to the target shuffle combines more straightforward.
llvm-svn: 256819
We need a frame pointer if there is a push/pop sequence after the
prologue in order to unwind the stack. Scanning the instructions to
figure out if this happened made hasFP not constant-time which is a
violation of expectations. Let's compute this up-front and reuse that
computation when we need it.
llvm-svn: 256730
LLVM's targets need to know if stack pointer adjustments occur after the
prologue. This is needed to correctly determine if the red-zone is
appropriate to use or if a frame pointer is required.
Normally, LLVM can figure this out very precisely by reasoning about the
contents of the MachineFunction. There is an interesting corner case:
inline assembly.
The vast majority of inline assembly which will perform a push or pop is
done so to pair up with pushf or popf as appropriate. Unfortunately,
this inline assembly doesn't mark the stack pointer as clobbered
because, well, it isn't. The stack pointer is decremented and then
immediately incremented. Because of this, LLVM was changed in r256456
to conservatively assume that inline assembly contain a sequence of
stack operations. This is unfortunate because the vast majority of
inline assembly will not end up manipulating the stack pointer in any
way at all.
Instead, let's provide a more principled solution: an intrinsic.
FWIW, other compilers (MSVC and GCC among them) also provide this
functionality as an intrinsic.
llvm-svn: 256685
This adds support for the MCU psABI in a way different from r251223 and r251224,
basically reverting most of these two patches. The problem with the approach
taken in r251223/4 is that it only handled libcalls that originated from the backend.
However, the mid-end also inserts quite a few libcalls and assumes these use the
platform's default calling convention.
The previous patch tried to insert inregs when necessary both in the FE and,
somewhat hackily, in the CG. Instead, we now define a new default calling convention
for the MCU, which doesn't use inreg marking at all, similarly to what x86-64 does.
Differential Revision: http://reviews.llvm.org/D15054
llvm-svn: 256494
lower broadcast<type>x<vector> to shuffles.
there are two cases:
1.src is 128 bits and dest is 512 bits: in this case we will lower it to shuffle with imm = 0.
2.src is 256 bit and dest is 512 bits: in this case we will lower it to shuffle with imm = 01000100b (0x44) that way we will broadcast the 256bit source: ymm[0,1,2,3] => zmm[0,1,2,3,0,1,2,3] then it will mask it with the passthru value (in case it's mask op).
Differential Revision: http://reviews.llvm.org/D15790
llvm-svn: 256490
Fix TRUNCATE lowering vector to vector i1, use LSB and not MSB.
Implement VPMOVB/W/D/Q2M intrinsic.
Differential Revision: http://reviews.llvm.org/D15675
llvm-svn: 256470
First step towards making better use of AVX's implicit zeroing of the upper half of a 256-bit vector by instructions that only act on the lower 128-bit vector - discussed on D14151.
As well as the fact that 128-bit shuffle instructions are generally more capable, this can be performant for older CPUs with 128-bit ALUs (e.g. Jaguar, Sandy Bridge) that must treat 256-bit vectors as multiple micro-ops.
Moved the similar subvector extraction shuffle combines from PerformShuffleCombine256 to lowerVectorShuffle as well.
Note: I've avoided combining shuffles that reference elements from the upper halves of the input vectors - this may be reviewed in future work as well (AVX1 would probably always gain, but AVX2 does have some cross-lane shuffle instructions).
Differential Revision: http://reviews.llvm.org/D15477
llvm-svn: 256332
This patch transforms truncation between vectors of integers into
X86ISD::PACKUS/PACKSS operations during DAG combine. We don't do it in
lowering phase because after type legalization, the original truncation
will be turned into a BUILD_VECTOR with each element that is extracted
from a vector and then truncated, and from them it is difficult to do
this optimization. This greatly improves the performance of truncations
on some specific types.
Cost table is updated accordingly.
Differential revision: http://reviews.llvm.org/D14588
llvm-svn: 256194
It resolves clang selfhosting with std::once() for Cygwin.
FIXME: It may be EmulatedTLS-generic also for X86-Android.
FIXME: Pass EmulatedTLS to LLVM CodeGen from Clang with -femulated-tls.
llvm-svn: 256134
This folds (ashr (shl a, [56,48,32,24,16]), SarConst)
into (shl, (sext (a), [56,48,32,24,16] - SarConst))
or into (lshr, (sext (a), SarConst - [56,48,32,24,16]))
depending on sign of (SarConst - [56,48,32,24,16])
sexts in X86 are MOVs.
The MOVs have the same code size as above SHIFTs (only SHIFT by 1 has lower code size).
However the MOVs have 2 advantages to SHIFTs on x86:
1. MOVs can write to a register that differs from source.
2. MOVs accept memory operands.
This fixes PR24373.
Patch by: evgeny.v.stupachenko@intel.com
Differential Revision: http://reviews.llvm.org/D13161
llvm-svn: 255761
It adjusts from RSP-after-prologue to RBP, which is what SEH filters
need to do before they can use llvm.localrecover.
Fixes SEH filter captures, which were broken in r250088.
Issue reported by Alex Crichton.
llvm-svn: 255707
This patch improves on the suggested codegen from PR24475:
https://llvm.org/bugs/show_bug.cgi?id=24475
but only for the fmaxf() case to start, so we can sort out any bugs before
extending to fmin, f64, and vectors.
The fmax / maxnum definitions provide us flexibility for signed zeros, so the
only thing we have to worry about in this replacement sequence is NaN handling.
Note 1: It may be better to implement this as lowerFMAXNUM(), but that exposes
a problem: SelectionDAGBuilder::visitSelect() transforms compare/select
instructions into FMAXNUM nodes if we declare FMAXNUM legal or custom. Perhaps
that should be checking for NaN inputs or global unsafe-math before transforming?
As it stands, that bypasses a big set of optimizations that the x86 backend
already has in PerformSELECTCombine().
Note 2: The v2f32 test reveals another bug; the vector is extended to v4f32, so
we have completely unnecessary operations happening on undef elements of the
vector.
Differential Revision: http://reviews.llvm.org/D15294
llvm-svn: 255700
Full type legalizer that works with all vectors length - from 2 to 16, (i32, i64, float, double).
This intrinsic, for example
void @llvm.masked.scatter.v2f32(<2 x float>%data , <2 x float*>%ptrs , i32 align , <2 x i1>%mask )
requires type widening for data and type promotion for mask.
Differential Revision: http://reviews.llvm.org/D13633
llvm-svn: 255629
Part 1 was submitted in http://reviews.llvm.org/D15134.
Changes in this part:
* X86RegisterInfo.td, X86RecognizableInstr.cpp: Add FR128 register class.
* X86CallingConv.td: Pass f128 values in XMM registers or on stack.
* X86InstrCompiler.td, X86InstrInfo.td, X86InstrSSE.td:
Add instruction selection patterns for f128.
* X86ISelLowering.cpp:
When target has MMX registers, configure MVT::f128 in FR128RegClass,
with TypeSoftenFloat action, and custom actions for some opcodes.
Add missed cases of MVT::f128 in places that handle f32, f64, or vector types.
Add TODO comment to support f128 type in inline assembly code.
* SelectionDAGBuilder.cpp:
Fix infinite loop when f128 type can have
VT == TLI.getTypeToTransformTo(Ctx, VT).
* Add unit tests for x86-64 fp128 type.
Differential Revision: http://reviews.llvm.org/D11438
llvm-svn: 255558
Summary: This patch adds support of conversion (mul x, 2^N + 1) => (add (shl x, N), x) and (mul x, 2^N - 1) => (sub (shl x, N), x) if the multiplication can not be converted to LEA + SHL or LEA + LEA. LLVM has already supported this on ARM, and it should also be useful on X86. Note the patch currently only applies to cases where the constant operand is positive, and I am planing to add another patch to support negative cases after this.
Reviewers: craig.topper, RKSimon
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D14603
llvm-svn: 255415
Summary: This patch adds support of conversion (mul x, 2^N + 1) => (add (shl x, N), x) and (mul x, 2^N - 1) => (sub (shl x, N), x) if the multiplication can not be converted to LEA + SHL or LEA + LEA. LLVM has already supported this on ARM, and it should also be useful on X86. Note the patch currently only applies to cases where the constant operand is positive, and I am planing to add another patch to support negative cases after this.
Reviewers: craig.topper, RKSimon
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D14603
llvm-svn: 255391
On AVX and AVX2, BROADCAST instructions can load a scalar into all elements of a target vector.
This patch improves the lowering of 'splat' shuffles of a loaded vector into a broadcast - currently the lowering only works for cases where we are splatting the zero'th element, which is now generalised to any element.
Fix for PR23022
Differential Revision: http://reviews.llvm.org/D15310
llvm-svn: 255061
FP logic instructions are supported in DQ extension on AVX-512 target.
I use integer operations instead.
Added tests.
I also enabled FABS in this patch in order to check ANDPS.
The operations are FOR, FXOR, FAND, FANDN.
The instructions, that supported for 512-bit vector under DQ are:
VORPS/PD, VXORPS/PD, VANDPS/PD, FANDNPS/PD.
Differential Revision: http://reviews.llvm.org/D15110
llvm-svn: 254913
Patterns were missing for KNL target for <8 x i32>, <8 x float> masked load/store.
This intrinsic comes with all legal types:
<8 x float> @llvm.masked.load.v8f32(<8 x float>* %addr, i32 align, <8 x i1> %mask, <8 x float> %passThru),
but still requires lowering, because VMASKMOVPS, VMASKMOVDQU32 work with 512-bit vectors only.
All data operands should be widened to 512-bit vector.
The mask operand should be widened to v16i1 with zeroes.
Differential Revision: http://reviews.llvm.org/D15265
llvm-svn: 254909
These instructions are not supported by all CPUs in 64-bit mode. Emitting them
causes Chromium to crash on start-up for users with such chips.
(GCC puts these instructions behind -msahf on 64-bit for the same reason.)
This patch adds FeatureLAHFSAHF, enables it by default for 32-bit targets
and modern CPUs, and changes X86InstrInfo::copyPhysReg back to the lowering
from before r244503 when the instructions are not available.
Differential Revision: http://reviews.llvm.org/D15240
llvm-svn: 254793
Summary:
These ADJCALLSTACK markers don't generate code, but they keep dynamic
alloca code that calls chkstk out of the prologue.
This slightly pessimizes inalloca calls by preventing some register copy
coalescing, but I can live with that.
Reviewers: qcolombet
Subscribers: hans, llvm-commits
Differential Revision: http://reviews.llvm.org/D15200
llvm-svn: 254645
On FMA targets, we can avoid having to load a constant to negate a float/double multiply by instead using a FNMSUB (-(X*Y)-0)
Fix for PR24366
Differential Revision: http://reviews.llvm.org/D14909
llvm-svn: 254495
We could already recognise shuffle(FSUB, FADD) -> ADDSUB, this allow us to recognise shuffle(FADD, FSUB) -> ADDSUB by commuting the shuffle mask prior to matching.
llvm-svn: 254259
Summary:
Many target lowerings copy-paste the code to test SDValues for known constants.
This code can instead be shared in SelectionDAG.cpp, and reused in the targets.
Reviewers: MatzeB, andreadb, tstellarAMD
Subscribers: arsenm, jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D14945
llvm-svn: 254085
It was wrong order of operands (from intrinsic to DAG node).
I added more strict type specification for instruction selection.
Differential Revision: http://reviews.llvm.org/D14942
llvm-svn: 254059
X86 needs to use its own FMA opcodes, preventing the standard FNEG(FMA) pattern table recognition method used by other platforms. This patch adds support for lowering FNEG(FMA(X,Y,Z)) into a single suitably negated FMA instruction.
Fix for PR24364
Differential Revision: http://reviews.llvm.org/D14906
llvm-svn: 254016
This patch fixes the following issues:
1. Fix the return type of X86psadbw: it should not be the same type of inputs.
For vNi8 inputs the output should be vMi64, where M = N/8.
2. Fix the return type of int_x86_avx512_psad_bw_512 accordingly.
3. Fix the definiton of PSADBW, VPSADBW, and VPSADBWY accordingly.
4. Adjust the return type when building a DAG node of X86ISD::PSADBW type.
5. Update related tests.
Differential revision: http://reviews.llvm.org/D14897
llvm-svn: 254010
This patch detects the AVG pattern in vectorized code, which is simply
c = (a + b + 1) / 2, where a, b, and c have the same type which are vectors of
either unsigned i8 or unsigned i16. In the IR, i8/i16 will be promoted to
i32 before any arithmetic operations. The following IR shows such an example:
%1 = zext <N x i8> %a to <N x i32>
%2 = zext <N x i8> %b to <N x i32>
%3 = add nuw nsw <N x i32> %1, <i32 1 x N>
%4 = add nuw nsw <N x i32> %3, %2
%5 = lshr <N x i32> %N, <i32 1 x N>
%6 = trunc <N x i32> %5 to <N x i8>
and with this patch it will be converted to a X86ISD::AVG instruction.
The pattern recognition is done when combining instructions just before type
legalization during instruction selection. We do it here because after type
legalization, it is much more difficult to do pattern recognition based
on many instructions that are doing type conversions. Therefore, for
target-specific instructions (like X86ISD::AVG), we need to take care of type
legalization by ourselves. However, as X86ISD::AVG behaves similarly to
ISD::ADD, I am wondering if there is a way to legalize operands and result
types of X86ISD::AVG together with ISD::ADD. It seems that the current design
doesn't support this idea.
Tests are added for SSE2, AVX2, and AVX512BW and both i8 and i16 types of
variant vector sizes.
Differential revision: http://reviews.llvm.org/D14761
llvm-svn: 253952
ISERT_SUBVECTOR for i1 vectors may be done with shifts, when we insert into the lower part, or into the upper part, on into all-zero vector.
CONCAT_VECTORS uses ISERT_SUBVECTOR.
Differential Revision: http://reviews.llvm.org/D14815
llvm-svn: 253819
Summary:
Now that there is a one-to-one mapping from MachineFunction to
WinEHFuncInfo, we don't need to use a DenseMap to select the right
WinEHFuncInfo for the current funclet.
The main challenge here is that X86WinEHStatePass is an IR pass that
doesn't have access to the MachineFunction. I gave it its own
WinEHFuncInfo object that it uses to calculate state numbers, which it
then throws away. As long as nobody creates or removes EH pads between
this pass and SDAG construction, we will get the same state numbers.
The other thing X86WinEHStatePass does is to mark the EH registration
node. Instead of communicating which alloca was the registration through
WinEHFuncInfo, I added the llvm.x86.seh.ehregnode intrinsic. This
intrinsic generates no code and simply marks the alloca in use.
Reviewers: JCTremoulet
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14668
llvm-svn: 253378
This patch is enabling combining UNPCKL with vector_shuffle that moves the upper
half of a vector into the lower half, into a UNPCKH instruction. For example:
t2: v16i8 = vector_shuffle<8,9,10,11,12,13,14,15,u,u,u,u,u,u,u,u> t1, undef:v16i8
t3: v16i8 = X86ISD::UNPCKL undef:v16i8, t2
will be combined to:
t3: v16i8 = X86ISD::UNPCKH undef:v16i8, t1
Differential revision: http://reviews.llvm.org/D14399
llvm-svn: 253067
Summary:
The value that the CoreCLR personality passes to a funclet for the
establisher frame may be the root function's frame or may be the parent
funclet's (mostly empty) frame in the case of nested funclets. Each
funclet stores a pointer to the root frame in its own (mostly empty)
frame, as does the root function itself. All frames allocate this slot at
the same offset, measured from the post-prolog stack pointer, so that the
same sequence can accept any ancestor as an establisher frame parameter
value, and so that a single offset can be reported to the GC, which also
looks at this slot.
This change allocate the slot when processing function entry, and records
its frame index on the WinEHFuncInfo object, then inserts the code to
set/copy it during prolog emission.
Reviewers: majnemer, AndyAyers, pgavlin, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14614
llvm-svn: 252983
Summary: Other personalities don't use this special frame slot.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14580
llvm-svn: 252778
For CoreCLR on Windows, stack probes must be emitted as inline sequences that probe successive stack pages
between the current stack limit and the desired new stack pointer location. This implements support for
the inline expansion on x64.
For in-body alloca probes, expansion is done during instruction lowering. For prolog probes, a stub call
is initially emitted during prolog creation, and expanded after epilog generation, to avoid complications
that arise when introducing new machine basic blocks during prolog and epilog creation.
Added a new test case, modified an existing one to exclude non-x64 coreclr (for now).
Add test case
Fix tests
llvm-svn: 252578
The TailDuplication machine pass ran across a malformed CFG: a PHI node
referred it's predecessor's predecessor instead of it's predecessor.
This occurred because we split the edge in X86ISelLowering when we
processed the CATCHRET but forgot to do something about the PHI nodes.
This fixes PR25444.
llvm-svn: 252413
Summary:
The CLR's personality routine passes these in rdx/edx, not rax/eax.
Make getExceptionPointerRegister a virtual method parameterized by
personality function to allow making this distinction.
Similarly make getExceptionSelectorRegister a virtual method parameterized
by personality function, for symmetry.
Reviewers: pgavlin, majnemer, rnk
Subscribers: jyknight, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14344
llvm-svn: 252383
Now that we recognize this, we can support it instead of bailing out.
That is, we can fold:
(v8i16 (shufflevector
(v8i16 (bitcast (v4i32 (build_vector X, Y, ...)))),
<1,1,...,1>))
into:
(v8i16 (vbroadcast (i16 (trunc (srl Y, 16)))))
llvm-svn: 252362
We used to incorrectly assume that the offset we're extracting from
was a multiple of the element size. So, we'd fold:
(v8i16 (shufflevector
(v8i16 (bitcast (v4i32 (build_vector X, Y, ...)))),
<1,1,...,1>))
into:
(v8i16 (vbroadcast (i16 (trunc Y))))
whereas we should have extracted the higher bits from X.
Instead, bail out if the assumption doesn't hold.
llvm-svn: 252361
This adds the EH_RESTORE x86 pseudo instr, which is responsible for
restoring the stack pointers: EBP and ESP, and ESI if stack realignment
is involved. We only need this on 32-bit x86, because on x64 the runtime
restores CSRs for us.
Previously we had to keep the CATCHRET instruction around during SEH so
that we could convince X86FrameLowering to restore our frame pointers.
Now we can split these instructions earlier.
This was confusing, because we had a return instruction which wasn't
really a return and was ultimately going to be removed by
X86FrameLowering. This change also simplifies X86FrameLowering, which
really shouldn't be building new MBBs.
No observable functional change currently, but with the new register
mask stuff in D14407, CATCHRET will become a register allocator barrier,
and our existing tests rely on us having reasonable register allocation
around SEH.
llvm-svn: 252266
We already had a test for this for 32-bit SEH catchpads, but those don't
actually create funclets. We had a bug that only appeared in funclet
prologues, where we would establish EBP and ESI as our FP and BP, and
then downstream prologue code would overwrite them.
While I was at it, I fixed Win64+funclets+stackrealign. This issue
doesn't come up as often there due to the ABI requring 16 byte stack
alignment, but now we can rest easy that AVX and WinEH will work well
together =P.
llvm-svn: 252210
This patch improves the memory folding of the inserted float element for the (V)INSERTPS instruction.
The existing implementation occurs in the DAGCombiner and relies on the narrowing of a whole vector load into a scalar load (and then converted into a vector) to (hopefully) allow folding to occur later on. Not only has this proven problematic for debug builds, it also prevents other memory folds (notably stack reloads) from happening.
This patch removes the old implementation and moves the folding code to the X86 foldMemoryOperand handler. A new private 'special case' function - foldMemoryOperandCustom - has been added to deal with memory folding of instructions that can't just use the lookup tables - (V)INSERTPS is the first of several that could be done.
It also tweaks the memory operand folding code with an additional pointer offset that allows existing memory addresses to be modified, in this case to convert the vector address to the explicit address of the scalar element that will be inserted.
Unlike the previous implementation we now set the insertion source index to zero, although this is ignored for the (V)INSERTPSrm version, anything that relied on shuffle decodes (such as unfolding of insertps loads) was incorrectly calculating the source address - I've added a test for this at insertps-unfold-load-bug.ll
Differential Revision: http://reviews.llvm.org/D13988
llvm-svn: 252074
The x86 "sitofp i64 to double" dag combine, in 32-bit mode, lowers sitofp
directly to X86ISD::FILD (or FILD_FLAG). This should not be done in soft-float mode.
llvm-svn: 252042
Optimized <8 x i32> to <8 x i16>
<4 x i64> to < 4 x i32>
<16 x i16> to <16 x i8>
All these oprtrations use now AVX512F set (KNL). Before this change it was implemented with AVX2 set.
Differential Revision: http://reviews.llvm.org/D14108
llvm-svn: 251764
Simon Pilgrim