Sema holds the current FPOptions which is adjusted by 'pragma STDC
FP_CONTRACT'. This then gets propagated into expression nodes as they are
built.
This encapsulates FPOptions so that this propagation happens opaquely rather
than directly with the fp_contractable on/off bit. This allows controlled
transitioning of fp_contractable to a ternary value (off, on, fast). It will
also allow adding more fast-math flags later.
This is toward moving fp-contraction=fast from an LLVM TargetOption to a
FastMathFlag in order to fix PR25721.
Differential Revision: https://reviews.llvm.org/D31166
llvm-svn: 298877
This restores behavior pre-r230064 since after PCMCache work (r298278)
we don't reload PCMs from disk within the same compiler invocation.
Testcases from r230064 are still left around since they still guarantee
the correct behavior we're expecting.
rdar://problem/19889777
llvm-svn: 298464
This reverts commit r298185, effectively reapplying r298165, after fixing the
new unit tests (PR32338). The memory buffer generator doesn't null-terminate
the MemoryBuffer it creates; this version of the commit informs getMemBuffer
about that to avoid the assert.
Original commit message follows:
----
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298278
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298165
This enhances the AST to keep track of locations of the names in those ObjC property attributes, and reports them for indexing.
Patch by Nathan Hawes!
https://reviews.llvm.org/D30907
llvm-svn: 297972
Since bitcode uses VBR encoding, large numbers are more expensive than
small ones. Instead of emitting a UINT_MAX sentinel after each sequence
of state-change pairs, emit the size of the sequence as a prefix.
This should have no functionality change besides saving bits from the
encoding.
llvm-svn: 297770
Change ASTFileSignature from a random 32-bit number to the hash of the
PCM content.
- Move definition ASTFileSignature to Basic/Module.h so Module and
ASTSourceDescriptor can use it.
- Change the signature from uint64_t to std::array<uint32_t,5>.
- Stop using (saving/reading) the size and modification time of PCM
files when there is a valid SIGNATURE.
- Add UNHASHED_CONTROL_BLOCK, and use it to store the SIGNATURE record
and other records that shouldn't affect the hash. Because implicit
modules reuses the same file for multiple levels of -Werror, this
includes DIAGNOSTIC_OPTIONS and DIAG_PRAGMA_MAPPINGS.
This helps to solve a PCH + implicit Modules dependency issue: PCH files
are handled by the external build system, whereas implicit modules are
handled by internal compiler build system. This prevents invalidating a
PCH when the compiler overwrites a PCM file with the same content
(modulo the diagnostic differences).
Design and original patch by Manman Ren!
llvm-svn: 297655
Summary:
The changes contained in this patch are:
1. Defines a new AST node `CoawaitDependentExpr` for representing co_await expressions while the promise type is still dependent.
2. Correctly detect and transform the 'co_await' operand to `p.await_transform(<expr>)` when possible.
3. Change the initial/final suspend points to build during the initial parse, so they have the correct operator co_await lookup results.
4. Fix transformation of the CoroutineBodyStmt so that it doesn't re-build the final/initial suspends.
@rsmith: This change is a little big, but it's not trivial for me to split it up. Please let me know if you would prefer this submitted as multiple patches.
Reviewers: rsmith, GorNishanov
Reviewed By: rsmith
Subscribers: ABataev, rsmith, mehdi_amini, cfe-commits
Differential Revision: https://reviews.llvm.org/D26057
llvm-svn: 297093
Now print diagnostics for static, virtual, inline, volatile, and const
differences in methods. Also use DeclarationName instead of IdentifierInfo
for additional robustness in diagnostic printing.
llvm-svn: 296932
When we are deciding whether we are creating a PCH or a module, we would
check if the ModuleMgr had any elements to switch into PCH mode.
However, when creating a module, the size may be 1. This would result
in us going down the wrong path.
This was found by cross-compiling the swift standard library. Use the
PCH chain length instead to identify the PCH mode.
Unfortunately, I have not yet been able to create a simple test case for
this, but have verified that this fixes the swift standard library
construction.
Thanks to Adrian Prantl for help and discussions with this change!
llvm-svn: 296769
This is a stopgap fix for PR31863, a regression introduced in r276159.
Consider this snippet:
struct FVector;
struct FVector {};
struct FBox {
FVector Min;
FBox(int);
};
namespace {
FBox InvalidBoundingBox(0);
}
While parsing the DECL_VAR for 'struct FBox', clang recursively read all the
dep decls until it finds the DECL_CXX_RECORD forward declaration for 'struct
FVector'. Then, it resumes all the way up back to DECL_VAR handling in
`ReadDeclRecord`, where it checks if `isConsumerInterestedIn` for the decl.
One of the condition for `isConsumerInterestedIn` to return false is if the
VarDecl is imported from a module `D->getImportedOwningModule()`, because it
will get emitted when we import the relevant module. However, before checking
if it comes from a module, clang checks if `Ctx.DeclMustBeEmitted(D)`, which
triggers the emission of 'struct FBox'. Since one of its fields is still
incomplete, it crashes.
Instead, check if `D->getImportedOwningModule()` is true before calling
`Ctx.DeclMustBeEmitted(D)`.
Differential Revision: https://reviews.llvm.org/D29753
rdar://problem/30173654
llvm-svn: 296656
Essentially, as a base class constructor does not construct virtual bases, such
a constructor for an abstract class does not need the corresponding base class
construction to be valid, and likewise for destructors.
This creates an awkward situation: clang will sometimes generate references to
the complete object and deleting destructors for an abstract class (it puts
them in the construction vtable for a derived class). But we can't generate a
"correct" version of these because we can't generate references to base class
constructors any more (if they're template specializations, say, we might not
have instantiated them and can't assume any other TU will emit a copy).
Fortunately, we don't need to, since no correct program can ever invoke them,
so instead emit symbols that just trap.
We should stop emitting references to these symbols, but still need to emit
definitions for compatibility.
llvm-svn: 296275
The goal of this is to fix a bug in modules where we'd merge
FunctionDecls that differed in their pass_object_size attributes. Since
we can overload on the presence of pass_object_size attributes, this
behavior is incorrect.
We don't represent `N` in `pass_object_size(N)` as part of
ExtParameterInfo, since it's an error to overload solely on the value of
N. This means that we have a bug if we have two modules that declare
functions that differ only in their pass_object_size attrs, like so:
// In module A, from a.h
void foo(char *__attribute__((pass_object_size(0))));
// In module B, from b.h
void foo(char *__attribute__((pass_object_size(1))));
// In module C, in main.c
#include "a.h"
#include "b.h"
At the moment, we'll merge the foo decls, when we should instead emit a
diagnostic about an invalid overload. We seem to have similar (silent)
behavior if we overload only on the return type of `foo` instead; I'll
try to find a good place to put a FIXME (or I'll just file a bug) soon.
This patch also fixes a bug where we'd not output the proper extended
parameter info for declarations with pass_object_size attrs.
llvm-svn: 296076
IdentifierInfo is hashed based on the stored string. FieldDecl versus other
Decl is now detected, as well as differently named fields.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295911
Add support for static_cast in classes. Add pointer-independent profiling for
Stmt's, sharing most of the logic with Stmt::Profile. This is the first of the
deep sub-Decl diffing for error messages.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295890
Add the basics for the ODRHash class, which will only process Decl's from
a whitelist, which currently only has AccessSpecDecl. Different access
specifiers in merged classes can now be detected.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295800
Reserve a spot for ODR hash in CXXRecordDecl and in its modules storage.
Default the hash value to 0 for all classes.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295533
If we never need to map any ID within the module to its global ID, we don't
need the module offset map. If a compilation transitively depends on lots of
unused module files, this can result in a modest performance improvement.
llvm-svn: 295517
https://reviews.llvm.org/D29922
This patch adds two fields for use in the implementation of 'distribute parallel for':
The increment expression for the distribute loop. As the chunk assigned to a team is executed by multiple threads within the 'parallel for' region, the increment expression has to correspond to the value returned by the related runtime call (for_static_init).
The upper bound of the innermost loop ('for' in 'distribute parallel for') is not the globalUB expression normally used for pragma 'for' when found in isolation. It is instead the upper bound of the chunk assigned to the team ('distribute' loop). In this way, we prevent teams from executing chunks assigned to other teams.
The use of these two fields can be see in a related explanatory patch:
https://reviews.llvm.org/D29508
llvm-svn: 295497
A slightly weaker form of ODR checking than previous attempts, but hopefully
won't break the modules build bot. Future work will be needed to catch all
cases.
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taken from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295421
Removed ndrange_t as Clang builtin type and added
as a struct type in the OpenCL header.
Use type name to do the Sema checking in enqueue_kernel
and modify IR generation accordingly.
Review: D28058
Patch by Dmitry Borisenkov!
llvm-svn: 295311
Recommit r293585 that was reverted in r293611 with new fixes. The previous
issue was determined to be an overly aggressive AST visitor from forward
declared objects. The visitor will now only deeply visit certain Decl's and
only do a shallow information extraction from all other Decl's.
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taken from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295284
Two functions that differ only in their enable_if attributes are
considered overloads, so we should check for those when we're trying to
figure out if two functions are mergeable.
We need to do the same thing for pass_object_size, as well. Looks like
that'll be a bit less trivial, since we sometimes do these merging
checks before we have pass_object_size attributes available (see the
merge checks in ASTDeclReader::VisitFunctionDecl that happen before we
read parameters, and merge checks in calls to ReadDeclAs<>()).
llvm-svn: 295252
Summary:
This adds associated constraints as a property of class templates.
An error is produced if redeclarations are not similarly constrained.
Reviewers: rsmith, faisalv, aaron.ballman
Reviewed By: rsmith
Subscribers: cfe-commits, nwilson
Differential Revision: https://reviews.llvm.org/D25674
llvm-svn: 294697
Following up on r291465 after a regression in r276159. When we use
-fmodule-name=X while building a PCH, modular headers in X will be
textually included and the compiler knows that we are not building
module X, so don't serialize such headers in the PCH as being part of a
module, because at this point they are not.
This was causing subtle bugs and malformed AST crashes, for instance,
when using the PCH in subsequent compiler invocation with -fmodules, the
HFI for a modular header would map to the PCH, which would force a
module load of and unexistent module ID.
rdar://problem/30171164
llvm-svn: 294361
We model deduction-guides as functions with a new kind of name that identifies
the template whose deduction they guide; the bulk of this patch is adding the
new name kind. This gives us a clean way to attach an extensible list of guides
to a class template in a way that doesn't require any special handling in AST
files etc (and we're going to need these functions we come to performing
deduction).
llvm-svn: 294266
The Module::WithCodegen flag was only being set when the module was
parsed from a ModuleMap. Instead set it late, in the ASTWriter to match
the layer where the MODULAR_CODEGEN_DECLs list is determined (the
WithCodegen flag essentially means "are this module's decls in
MODULAR_CODEGEN_DECLs").
When simultaneous emission of AST file and modular object is implemented
this may need to change - the Module::WithCodegen flag will need to be
set earlier, and ideally the MODULAR_CODEGEN_DECLs gathering will
consult this flag (that's not possible right now since Decls destined
for an AST File don't have a Module - only if they're /read/ from a
Module is that true - I expect that would need to change as well).
llvm-svn: 293692
We're seeing what we believe are false positives. (It's hard to tell with the
available diagnostics, and I'm not sure how to reduce them yet).
I'll send Richard reproduction details offline.
djasper/chandlerc suggested this should be a warning for now, to make rolling it
out feasible.
llvm-svn: 293611
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taked from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 293585
First pass at generating weak definitions of inline functions from module files
(& skipping (-O0) or emitting available_externally (optimizations)
definitions where those modules are used).
External functions defined in modules are emitted into the modular
object file as well (this may turn an existing ODR violation (if that
module were imported into multiple translations) into valid/linkable
code).
Internal symbols (static functions, for example) are not correctly
supported yet. The symbol will be produced, internal, in the modular
object - unreferenceable from the users.
Reviewers: rsmith
Differential Revision: https://reviews.llvm.org/D28845
llvm-svn: 293456
Oops... r293393 started calling ReadSignature in
ModuleManager::addModule even when there was no ExpectedSignature.
Whether or not this would have a measurable performance impact (I
spotted this by inspection, and ReadSignature should be fairly fast), we
might as well get what we can. Add an extra check against
ExpectedSignature to avoid the hit.
llvm-svn: 293415
Zero-initialize ModuleFile members directly in the class definition, and
move the (now uninteresting) constructor into the class definition.
There were a few members that weren't being initialized at all. I
zero-initialized them for consistency, but it's likely that they were
somehow initialized before their first use; i.e., there's likely no
functionality change here.
llvm-svn: 293404
Invert the main branch in ModuleManager::addModule to return early and
reduce indentation, and clean up a bunch of logic as a result. I split
out a function called updateModuleImports to avoid triggering code
duplication.
llvm-svn: 293400
I don't have a testcase for this (and I'm not sure if it's an observable
bug), but it seems obviously wrong that ModuleManager::removeModules is
failing to clean up deleted modules from ModuleFile::Imports. See the
code in ModuleManager::addModule that inserts into ModuleFile::Imports;
we need the inverse operation.
llvm-svn: 293399
ModuleManager::removeModules always deletes a tail of the
ModuleManager::Chain. Change the API to enforce that so that we can
simplify the code inside.
There's no real functionality change, although there's a slight
performance hack to loop to the First deleted module instead of the
final module in the chain (skipping the about-to-be-deleted tail).
Also document something suspicious: we fail to clean deleted modules out
of ModuleFile::Imports.
llvm-svn: 293398
Hide the pointer indirection in ModuleManager::begin, ModuleManager::end,
ModuleManager::rbegin, and ModuleManager::rend. Besides tidying up the call
sites, this is preparation for making ownership of ModuleFile explicit.
llvm-svn: 293394
The main point is to move the delete-the-new-module logic into the same block
that creates it, so I can simplify the memory management in a follow-up, but I
think it's clearer to use use a checkSignature helper here anyway.
There is a minor functionality change: we now scan ahead to pull the signature
out of the control block *only* if this is a new ModuleFile. For old ones,
ASTReader::ReadControlBlock will have already read the signature.
llvm-svn: 293393
another declaration, ensure we actually serialize / deserialize that
declaration.
Before this patch, if another copy of the typedef were merged with the parsed
version, we would emit type information referring to the merged version and
consequently emit nothing about the parsed anonymous struct. This resulted in
us losing information, particularly the visible merged module set for the
parsed definition. Force that information to be emitted and to be loaded when
the typedef is used.
llvm-svn: 293219
This change adds a new type node, DeducedTemplateSpecializationType, to
represent a type template name that has been used as a type. This is modeled
around AutoType, and shares a common base class for representing a deduced
placeholder type.
We allow deduced class template types in a few more places than the standard
does: in conditions and for-range-declarators, and in new-type-ids. This is
consistent with GCC and with discussion on the core reflector. This patch
does not yet support deduced class template types being named in typename
specifiers.
llvm-svn: 293207
Rather than storing a single flat list of SourceLocations where the diagnostic
state changes (in source order), we now store a separate list for each FileID
in which there is a diagnostic state transition. (State for other files is
built and cached lazily, on demand.) This has two consequences:
1) We can now sensibly support modules, and properly track the diagnostic state
for modular headers (this matters when, for instance, triggering instantiation
of a template defined within a module triggers diagnostics).
2) It's much faster than the old approach, since we can now just do a binary
search on the offsets within the FileID rather than needing to call
isBeforeInTranslationUnit to determine source order (which is surprisingly
slow). For some pathological (but real world) files, this reduces total
compilation time by more than 10%.
For now, the diagnostic state points for modules are loaded eagerly. It seems
feasible to defer this until diagnostic state information for one of the
module's files is needed, but that's not part of this patch.
llvm-svn: 293123
The thread_limit-clause on the combined directive applies to the
'teams' region of this construct. We modify the ThreadLimitClause
class to capture the clause expression within the 'target' region.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29087
llvm-svn: 293049
The num_teams-clause on the combined directive applies to the
'teams' region of this construct. We modify the NumTeamsClause
class to capture the clause expression within the 'target' region.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29085
llvm-svn: 293048
The num_threads-clause on the combined directive applies to the
'parallel' region of this construct. We modify the NumThreadsClause
class to capture the clause expression within the 'target' region.
The offload runtime call for 'target parallel' is changed to
__tgt_target_teams() with 1 team and the number of threads set by
this clause or a default if none.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D29082
llvm-svn: 292997
Summary:
This patch changes TableGen-generated code in AttrPCHRead to call functions on
ASTRecordReader, instead of passing separate parameters to ASTReader. This is a
follow-up to r290217.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D28007
llvm-svn: 292868
The if-clause on the combined directive potentially applies to both the
'target' and the 'parallel' regions. Codegen'ing the if-clause on the
combined directive requires additional support because the expression in
the clause must be captured by the 'target' capture statement but not
the 'parallel' capture statement. Note that this situation arises for
other clauses such as num_threads.
The OMPIfClause class inherits OMPClauseWithPreInit to support capturing
of expressions in the clause. A member CaptureRegion is added to
OMPClauseWithPreInit to indicate which captured statement (in this case
'target' but not 'parallel') captures these expressions.
To ensure correct codegen of captured expressions in the presence of
combined 'target' directives, OMPParallelScope was added to 'parallel'
codegen.
Reviewers: ABataev
Differential Revision: https://reviews.llvm.org/D28781
llvm-svn: 292437
Summary:
Add a callback from ASTReader to DeserializationListener when the former
reads an IMPORTED_MODULES block. This supports Swift in using PCH for
bridging headers.
Reviewers: doug.gregor, manmanren, bruno
Reviewed By: manmanren
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D28779
llvm-svn: 292436
D28684 changed llvm::zlib to return Error instead of Status.
It was accepted and committed in r292214, but then reverted in r292217
because I missed that clang code also needs to be updated.
Patch do that.
D28684 recommitted again as r292226
Differential revision: https://reviews.llvm.org/D28807
llvm-svn: 292227
Summary:
We do not currently track the source locations for exception specifications such
that their source range can be queried through the AST. This leads to trying to
write more complex code to determine the source range for uses like FixItHints
(see D18575 for an example). In addition to use within tools like clang-tidy, I
think this information may become more important to track as exception
specifications become more integrated into the type system.
Patch by Don Hinton.
Reviewers: rsmith
Subscribers: malcolm.parsons, sbarzowski, alexfh, hintonda, cfe-commits
Differential Revision: https://reviews.llvm.org/D20428
llvm-svn: 291771
This patch is to implement sema and parsing for 'target teams distribute simd’ pragma.
Differential Revision: https://reviews.llvm.org/D28252
llvm-svn: 291579
In r276159, we started to say that a module X is defined in a pch if we specify
-fmodule-name when building the pch. This caused a regression that reports
module X is defined in both pch and pcm if we generate the pch with
-fmodule-name=X and then in a separate clang invocation, we include the pch and
also import X.pcm.
This patch adds an option CompilingPCH similar to CompilingModule. When we use
-fmodule-name=X while building a pch, modular headers in X will be textually
included and the compiler knows that we are not building module X, so we don't
put module X in SUBMODULE_DEFINITION of the pch.
Differential Revision: http://reviews.llvm.org/D28415
llvm-svn: 291465
This patch is to implement sema and parsing for 'target teams distribute parallel for simd’ pragma.
Differential Revision: https://reviews.llvm.org/D28202
llvm-svn: 290862
This patch is to implement sema and parsing for 'target teams distribute parallel for’ pragma.
Differential Revision: https://reviews.llvm.org/D28160
llvm-svn: 290725
This patch is to implement sema and parsing for 'target teams distribute' pragma.
Differential Revision: https://reviews.llvm.org/D28015
llvm-svn: 290508
Summary:
This follows up to r290217, and makes functions on ASTRecordReader consistent
and valid style.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D28008
llvm-svn: 290236
Summary:
For ASTDeclReader and ASTStmtReader, every parameter "unsigned &Idx" ultimately
comes from a variable that is defined on the stack, next to the RecordData. This
change moves that index into the ASTRecordReader.
TypeLocReader cannot be transitioned, due to TableGen-generated code which calls
ASTReader::GetTypeSourceInfo.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27836
llvm-svn: 290217
This change introduces UsingPackDecl as a marker for the set of UsingDecls
produced by pack expansion of a single (unresolved) using declaration. This is
not strictly necessary (we just need to be able to map from the original using
declaration to its expansions somehow), but it's useful to maintain the
invariant that each declaration reference instantiates to refer to one
declaration.
This is a re-commit of r290080 (reverted in r290092) with a fix for a
use-after-lifetime bug.
llvm-svn: 290203
`RawComments` are sorted by comparing underlying `SourceLocation`'s. This is
done by comparing `FileID` and `Offset`; when the `FileID` is the same it means
the locations are within the same TU and the `Offset` is used.
FileID, from the source code: "A mostly-opaque identifier, where 0 is
"invalid", >0 is this module, and <-1 is something loaded from another
module.". That said, when de-serializing SourceLocations, FileID's from
RawComments loaded from other modules get negative IDs where previously they
were positive. This makes imported RawComments unsorted, leading to a wrong
merge with other comments from the current TU. Fix that by sorting RawComments
properly after de-serialization and before merge.
This fixes an assertion in `ASTContext::getRawCommentForDeclNoCache`,
which fires only in a debug build of clang.
Differential Revision: https://reviews.llvm.org/D27546
rdar://problem/29287314
llvm-svn: 290134
This change introduces UsingPackDecl as a marker for the set of UsingDecls
produced by pack expansion of a single (unresolved) using declaration. This is
not strictly necessary (we just need to be able to map from the original using
declaration to its expansions somehow), but it's useful to maintain the
invariant that each declaration reference instantiates to refer to one
declaration.
llvm-svn: 290080
Added a map to associate types and declarations with extensions.
Refactored existing diagnostic for disabled types associated with extensions and extended it to declarations for generic situation.
Fixed some bugs for types associated with extensions.
Allow users to use pragma to declare types and functions for supported extensions, e.g.
#pragma OPENCL EXTENSION the_new_extension_name : begin
// declare types and functions associated with the extension here
#pragma OPENCL EXTENSION the_new_extension_name : end
Differential Revision: https://reviews.llvm.org/D21698
llvm-svn: 289979
Summary:
When reading an ASTRecord, each RecordData is logically contained within a
single ModuleFile, and global(er) state is contained by a single ASTReader. This
means that any operations that read from a RecordData and reference an ASTReader
or a ModuleFile, will always reference the same ASTReader or ModuleFile.
ASTRecordReader groups these together so that parameters don't need to be
duplicated ad infinitum. Most uses of the Idx variable seem to be redunant
aliases as well, but I'll leave that for now.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27784
llvm-svn: 289870
copy constructors of classes with array members, instead using
ArrayInitLoopExpr to represent the initialization loop.
This exposed a bug in the static analyzer where it was unable to differentiate
between zero-initialized and unknown array values, which has also been fixed
here.
llvm-svn: 289618
Adam Nemet