Currently it is uses the same code used on linux. Will be replaced with
android specific code if needed.
Differential Revision: http://reviews.llvm.org/D7613
llvm-svn: 229371
Fixed test case to copy redirected stdout/stderr files from remote
target to host
llgs wasn't bothering to put the pty master file handle in the right
place if stdout/stderr were redirected to a file. It is still needed
for stdin.
Corrected some log message text
llvm-svn: 229141
'-Winconsistent-missing-override' warning. I suggest folks use this to
ensure that override is consistently used to mark virtual function
overrides.
llvm-svn: 229084
both a user process dyld and for a kernel binary -- we
will decide which to prefer after one or both have been
located.
It would be faster to stop the search thorugh the core
segments one we've found a dyld/kernel binary - but that
may trick us into missing the one we would prefer.
<rdar://problem/19806413>
llvm-svn: 228910
Summary: Coverity warns that unsigned >= 0 is always true, and k_first_gpr_powerpc happens to be 0. Quiet Coverity by changing that comparison instead to a static_assert(), in case things change in the future.
Reviewers: emaste
Reviewed By: emaste
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7576
llvm-svn: 228908
We want to forward stdin when stdio is not disabled and when we're not
redirecting stdin from a file.
renamed m_stdio_disable to m_stdin_forward and inverted value because
that's what we want to remember.
There was previously a bug that if you redirected stdin from a file,
stdout and stderr would also be redirected to /dev/null
Adds support for remote target to TestProcessIO.py
Fixes ProcessIOTestCase.test_stdin_redirection_with_dwarf for remote
Linux targets
llvm-svn: 228744
Processes running on a remote target can already send $O messages
to send stdout but there is no way to send stdin to a remote
inferior.
This allows processes using the API to pump stdin into a remote
inferior process.
It fixes a hang in TestProcessIO.py when running against a remote
target.
llvm-svn: 228419
Summary:
After closing all the leaked file descriptors to the inferior tty, the following problem occured:
- when stdin, stdout and stderr are redirected, there are no slave descriptors open (which is good)
- lldb has a reader thread, which attempts to read from the master end of the tty
- this thread receives an EOF
- in response, it closes it's master end
- as this is the last open file descriptor for the master end, this deletes the tty and sends
SIGHUP to the inferior (this is bad)
I fix this problem by making sure the master end remains open for the duration of the inferior
process by storing a copy of the file descriptor in ProcessMonitor. I create a copy to avoid
ownership issues with the reading thread.
Reviewers: ovyalov, emaste
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7440
llvm-svn: 228391
* Fix cmake script for android x86
* Reorder includes to avoid collision between system macros and local
variables in clang framework
Differential Revision: http://reviews.llvm.org/D7435
llvm-svn: 228388
* Set the state of the process into running/stepping on continue/step operations
* Add mutex to use transactions in Thread State Coordinator
** It is required because the events from two Signal Handler or form a Signal handler and a Resume request shouldn't overlap
* Send Stop Replay Packet only when the state of the process changed
Differential Revision: http://reviews.llvm.org/D7374
llvm-svn: 228387
Summary:
This adds the register plumbing, as well as register reading in FreeBSD core
dumps. Further work on the POSIX/FreeBSD ProcessMonitor is required in order to
support ptrace access to these registers.
Reviewers: tfiala, emaste
Reviewed By: emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D7039
llvm-svn: 228278
Summary:
Both LLDB and LLGS are leaking file descriptors into the debugged process. This plugs the leak by
closing the unneeded descriptors. In one case I use O_CLOEXEC, which I hope is supported on
relevant platforms. I also added a regression test and plugged a fd leak in dosep.py.
Reviewers: vharron, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7372
llvm-svn: 228130
Remove implicit stop action on $vCont package for threads where no
explicit action or default action specified based on the specification
(they have to stay in there original state).
llvm-svn: 227933
NativeProcessLinux::MonitorSignal was automatically resuming threads
that stopped due to a signal. This is inconsistent with the
behavior of lldb and gdb. This change removes the automatic resume.
Fixes
TestSendSignal.py
TestSignalsAPI.py
if PLATFORM_LINUX_FORCE_LLGS_LOCAL is in the environment vars.
llvm-svn: 227918
Note this code path should not happen - it implies a bug in another part of
the code. For the thread to receive the stop signal as it is handled, the
and for it to already have a stop reason, it implies the kernel was able to
tell the thread that it stopped while it was stopped. More likely this
seems to indicate a bug where an actual thread start was not getting correctly
logged. If it does get hit, we'll want to understand the sequence to figure
out if it is truly legitimate or if it implies another bug.
llvm-svn: 227916
It looks like Shawn's fix addresses what the initial hijacking was trying
to accomplish per conversations with Greg and Jim. The hijacking was
causing several tests to hang (#61, #62, #63, #64, #67, possibly more).
These tests now just fail rather than hang with this modification.
llvm-svn: 227914
* When the thread state coordinator is told to skip sending a stop request
for a running thread that is ignored (e.g. the thread that steps in a
step operation is technically running and should not have a stop sent
to it, since it will stop of its own accord per the kernel step operation),
ensure the deferred signal notification logic still waits for the
skipped thread. (i.e. we want to defer the notification until the
stepping thread is indeed stopped, we just don't want to send it a tgkill).
* Add ThreadStateCoordinator::RequestResumeAsNeeded(). This variant of the
RequestResume() method does not call the error function when the thread
is already running. Instead, it just logs that the thread is already
running and skips the resume operation. This is useful for the case of
vCont;c handling, where we tell all threads that they should be running.
At the place we're calling, all we know is "we want this thread running if
it isn't already," and that's exactly what this command does.
* Formatting change (minor) in NativeThreadLinux logging.
llvm-svn: 227913
See https://github.com/tfiala/lldb/issues/75. Not fixed yet but
continuing to push this further.
Fixes:
* Resume() now skips doing deferred notifications if we're doing a
vCont;{c,C}. In this case, we're trying to start something up,
not defer a stop notification. The default thread action stop
mode pickup was triggering a stop because it had at least one
stop, which was wrong in the case of a continue. (Bug introduced
by previous change.)
* Added a variant to ThreadStateCoordinator to specify a set of
thread ids to be skipped when triggering stop notifications to
non-stopped threads on a deferred signal call. For the case of
a stepping thread, it is actually told to step (and is running)
for a brief moment, but the thread state coordinator would think
it needed to send the stepping thread a stop, which id doesn't
need to do. This facility allows me to get around that cleanly.
With this change, behavior is now reduced to something I think is
essentially a different bug:
* Doing a step into libc code from my code crashes llgs.
* Doing a next out of a function in my own code crashes llgs.
llvm-svn: 227912
Tracked down while working on https://github.com/tfiala/lldb/issues/75.
This is not a complete fix for that issue, but moves us farther along.
Fixes:
* When a thread step is requested via vCont:{s,S}, Resume() now marks
the stepping thread as (1) currently stepping and (2) does trigger
the deferred signal for the stepped thread. This fixes a bug where
we were actually triggering a deferred stop cycle here for the non-stepping
thread since the single step thread was not part of the Resume()
deferred signal mechanism. The stepping thread is also marked in
the thread state coordinator as running (via a resume callback).
* When we get the SIGTRAP signal for the step completion, we don't
do a deferred signal call - that happened during the vCont:{s,S}
processing in Resume() already. Now we just need to mark that
the stepping thread is now stopped. If this is the last thread
in the set that needs to stop, it will trigger the process/delegate
stop call that will notify lldb. Otherwise, that'll happen when
the final thead we're waiting for stops.
Misc:
* Fixed up thread stop logging to use a leading 0 (0x%PRIx32) so
we don't get log lines like 0x5 for 0x05 SIGTRAP.
llvm-svn: 227911
* Fixed bug in run loop where run loop return enum was being treated
erroneously like an int, causing the TSC event loop to terminate
prematurely.
* Added an explicit scope in NativeProcessLinux::Resume() for the
threads lock lifetime. (This was likely unnecessary but is
more explicit.)
* Fixed a bug in ThreadStateCoordinator where resume execution was
not updating the internal state about the thread assumed to be
running now. I'll add a test and upstream this in a moment.
* Added a verbose logging mechanism to event processing within
ThreadStateCoordinator. It is currently enabled when the
'log enable lldb thread' is true upon inferior launch/attach.
llvm-svn: 227909
This patch fixes TestRegisters on Linux with LLGS
Introduce GetUserRegisterCount on RegisterInfoInterface to distinguish
lldb internal registers (e.g.: DR0-DR7) during register counting.
Update GDBRemoteCommunicationServer to skip lldb internal registers on
read/write register and on discover register.
Submitted for Tamas Berghammer
llvm-svn: 226959
Make sure the selected platform is always used
Make sure that the host uses the connect://hostname to connect to both
the lldb-platform and the lldb-gdbserver rather than what the platform
reports as the hostname of the lldb-gdbserver
Make sure that lldb-platform uses the IP address on it's connection
back to the host instead of the hostname that the host sends to it
when launching lldb-gdbserver with the remote host information
Tested on OSX and Linux
llvm-svn: 226712
introduced subtle bugs in two places in
RegisterContextLLDB::GetFullUnwindPlanForFrame where
it specifically wanted to get an eh_frame unwind plan
and was using "Get CallSite UnwindPlan" as synonymous
with that. But now we have two different types of
unwind plan that can be returned in that case, and
compact unwind won't behaves as needed.
<rdar://problem/19528559>
llvm-svn: 226631
This hooks up the changes necessary to set the trap flag on the
CPU and properly manage the process and thread's resume state
and private state so that the ThreadPlan does its thing.
Stepping still doesn't work as of this change, because there are
some issues with stack frames where it doesn't update the thread's
frame list correctly when it breaks inside of a function, but
I will try to fix that separately.
llvm-svn: 226221
The refactor was motivated by some comments that Greg made
http://reviews.llvm.org/D6918
and also to break a dependency cascade that caused functions linking
in string->int conversion functions to pull in most of lldb
llvm-svn: 226199
These fix various issues with path handling and disable a few tests
which use features of LLVM which are not yet supported on Windows.
llvm-svn: 226042
This is currently controlled by a setting:
(lldb) settings set target.process.python-os-plugin-path <path>
Or clearing it with:
(lldb) settings clear target.process.python-os-plugin-path
The process will now reload the OperatingSystem plug-in.
This was implemented by:
- adding the ability to set a notify callback for when an option value is changed
- added the ability for the process plug-in to load the operating system plug-in on the fly
- fixed bugs in the Process::GetStatus() so all threads are displayed if their thread IDs are larger than 32 bits
- adding a callback in ProcessProperties to tell when the "python-os-plugin-path" is changed by the user
- fixing a crasher in ProcessMachCore that happens when updating the thread list when the OS plugin is reloaded
llvm-svn: 225831
it more generally available.
Add checks to UnwindAssembly_x86::AugmentUnwindPlanFromCallSite() so
that it won't try to augment an UnwindPlan that already describes
the function epilogue.
Add a test case for backtracing out of _sigtramp on Darwin systems.
This could probably be adapted to test the same thing on linux/bsd but
the function names of sigtramp and kill are probably platform
specific and I'm not sure what they should be.
llvm-svn: 225578
so that we will use the UnwindPlan's rule for providing the stack
pointer BEFORE we use the trick of using the callee's CFA address
as the stack pointer. When we're in a _sigtramp frame, the CFA of
the _sigtramp stack frame is not the same as the stack pointer value
when the async interrupt occurred -- we need to use the eh_frame
rules for retrieving the correct value.
<rdar://problem/18913548>
llvm-svn: 225427
This was causing a race condition where DoDestroy() would acquire
the lock and then initiate a shutdown and then wait for it to
complete. But part of the shutdown involved acquiring the same
lock from a different thread. So the main thread would timeout
waiting for the shutdown to complete and return too soon.
The end result of this is that SBProcess::Kill() was broken on
Windows.
llvm-svn: 225297
This fixes compilation failures in the 64-bit build of LLDB on Windows.
Patch by Aidan Dodds
Differential Revision: http://reviews.llvm.org/D6704
llvm-svn: 224528
The issue with Thumb IT (if/then) instructions is the IT instruction preceeds up to four instructions that are made conditional. If a breakpoint is placed on one of the conditional instructions, the instruction either needs to match the thumb opcode size (2 or 4 bytes) or a BKPT instruction needs to be used as these are always unconditional (even in a IT instruction). If BKPT instructions are used, then we might end up stopping on an instruction that won't get executed. So if we do stop at a BKPT instruction, we need to continue if the condition is not true.
When using the BKPT isntructions are easy in that you don't need to detect the size of the breakpoint that needs to be used when setting a breakpoint even in a thumb IT instruction. The bad part is you will now always stop at the opcode location and let LLDB determine if it should auto-continue. If the BKPT instruction is used, the BKPT that is used for ARM code should be something that also triggers the BKPT instruction in Thumb in case you set a breakpoint in the middle of code and the code is actually Thumb code. A value of 0xE120BE70 will work since the lower 16 bits being 0xBE70 happens to be a Thumb BKPT instruction.
The alternative is to use trap or illegal instructions that the kernel will translate into breakpoint hits. On Mac this was 0xE7FFDEFE for ARM and 0xDEFE for Thumb. The darwin kernel currently doesn't recognize any 32 bit Thumb instruction as a instruction that will get turned into a breakpoint exception (EXC_BREAKPOINT), so we had to use the BKPT instruction on Mac. The linux kernel recognizes a 16 and a 32 bit instruction as valid thumb breakpoint opcodes. The benefit of using 16 or 32 bit instructions is you don't stop on opcodes in a IT block when the condition doesn't match.
To further complicate things, single stepping on ARM is often implemented by modifying the BCR/BVR registers and setting the processor to stop when the PC is not equal to the current value. This means single stepping is another way the ARM target can stop on instructions that won't get executed.
This patch does the following:
1 - Fix the internal debugserver for Apple to use the BKPT instruction for ARM and Thumb
2 - Fix LLDB to catch when we stop in the middle of a Thumb IT instruction and continue if we stop at an instruction that won't execute
3 - Fixes this in a way that will work for any target on any platform as long as it is ARM/Thumb
4 - Adds a patch for ignoring conditions that don't match when in ARM mode (see below)
This patch also provides the code that implements the same thing for ARM instructions, though it is disabled for now. The ARM patch will check the condition of the instruction in ARM mode and continue if the condition isn't true (and therefore the instruction would not be executed). Again, this is not enable, but the code for it has been added.
<rdar://problem/19145455>
llvm-svn: 223851
a register value that is live in the stack frame 0 register context.
Fixes a problem where retrieving a register value on stack frame #n
would involved O(n!) stack frame checks. This could be very slow on
a deep stack when retrieving register values that had not been
modified/saved by any of the stack frames. Not common, but annoying
when it was hit.
<rdar://problem/19010211>
llvm-svn: 223843
section for x86_64 and i386 targets on Darwin systems. Currently only the
compact unwind encoding for normal frame-using functions is supported but it
will be easy handle frameless functions when I have a bit more free time to
test it. The LSDA and personality routines for functions are also retrieved
correctly for functions from the compact unwind section.
This new code is very fresh -- it passes the lldb testsuite and I've done
by-hand inspection of many functions and am getting correct behavior for all
of them. There may need to be some bug fixing over the next couple weeks as
I exercise and test it further. But I think it's fine right now so I'm
committing it.
<rdar://problem/13220837>
llvm-svn: 223625
This reverts commit 4a5ad2c077166cc3d6e7ab4cc6e3dcbbe922af86.
Windows doesn't support select() for pipe objects, and this also fails
to compile on Windows. Reverting this until we can get it sorted out
to keep the windows build working.
llvm-svn: 223392
This is a temporary workaround to get deferred breakpoint
resolution working until Bug 21720 is addressed. Even with this
workaround, it will only resolve deferred breakpoints in the
executable module, and not in a shared library.
llvm-svn: 223273
Previously if we got a DoDestroy while stopped at a breakpoint, we
would detach and then say the process had exited. This is completely
wrong, as it resulted in the python script incorrectly assuming that
the process had actually exited and trying to delete the image, when
in fact it had done no such thing.
The fix employed here is that when we get a DoDestroy, we do 3 steps:
1) initiate a termination sequence on the process
2) If we were stopped handling an exception of any kind, mask it and
let the program resume, causing the program to see the termination
request and exit on its own.
3) Let the program exit normally, and close all of our handles before
returning control back to DoDestroy.
This fixes Bug 21722 and Bug 21723.
llvm-svn: 223272
These methods are difficult / impossible to implement in a way
that is semantically equivalent to the expectations set by LLDB
for using them. In the future, we should find an alternative
strategy (for example, i/o redirection) for achieving similar
functionality, and hopefully deprecate these APIs someday.
llvm-svn: 222775
UnwindLLDB::AddOneMoreFrame to try the fallback unwind plan on
that same stack frame before it tries the fallback unwind plan
on the "next" or callee frame.
In RegisterContextLLDB::TryFallbackUnwindPlan, when we're
trying the fallback unwind plan to see if it is valid, make
sure we change all of the object ivars that might be used in
the process of fetching the CFA & caller's saved pc value
and restore those if we decide not to use the fallback
unwindplan.
<rdar://problem/19035079>
llvm-svn: 222601
LLDB supports many different register numbering schemes, and these
are typically prefixed with an indicator that lets the user know
what numbering scheme is used. The gcc numbering scheme is
prefixed with gcc, and there are similar ones for dwarf, gdb,
and gcc_dwarf.
LLDB also contains its own internal numbering scheme, but the enum
for LLDB's numbering scheme was prefixed differently. This patch
changes the names of these enums to use the same naming scheme for
the enum values as the rest of the register kinds by removing gpr_
and fpu_ prefixes, and instead using lldb_ prefixes for all enum
values.
Differential Revision: http://reviews.llvm.org/D6351
Reviewed by: Greg Clayton
llvm-svn: 222495
Running a diff against lldb-x86-register-enums.h and the file
modified in this patch, the two enums were completely identical.
Deleting one of them to reduce code noise.
llvm-svn: 222478
This implements the skeleton of a RegisterContext for Windows.
In particular, this implements support only for x86 general purpose
registers.
After this patch, LLDB on Windows can perform basic debugging
operations in a single-threaded inferior process (breakpoint,
register inspection, frame select, unwinding, etc).
Differential Revision: http://reviews.llvm.org/D6322
Reviewed by: Greg Clayton
llvm-svn: 222474
where it is retrieving the Return Address register contents
on a target where that's a thing. If we fail to get a valid
RA, we force a switch to the fallback unwind plan. This patch
adds a sanity check for that fallback unwind plan -- it must
get a valid CFA for this frame in addition to being able to
retrieve the caller's PC -- and it correctly marks the unwind
rules as failing if the fallback unwind plan fails.
<rdar://problem/19010211>
llvm-svn: 222301
Previously using HostThread::GetNativeThread() required an ugly
cast to most-derived type. This solves the issue by simply returning
the derived type directly.
llvm-svn: 222185
Previously we were directly updating the thread list and stopping
and restarting the process every time threads were created. With
this patch, we queue up thread launches and thread exits, resolve
these all internally, and only update the threads when we get an
UpdateThreadList call. We now only update the private state on
an actual stop (i.e. breakpoint).
llvm-svn: 222178
This creates a TargetThreadWindows class and updates the thread
list of the Process with the main thread. Additionally, we
fill out a few more overrides of Process base class methods. We
do not yet update the thread list as threads are created and/or
destroyed, and we do not yet propagate stop reasons to threads as
their states change.
llvm-svn: 222148
RegisterContextLLDB. I have core files of half a dozen tricky
unwind situations on x86/arm and they're all working pretty much
correctly at this point, but we'll need to keep an eye out for
unwinder regressions for a little while; it's tricky to get these
heuristics completely correct in all unwind situations.
<rdar://problem/18937193>
llvm-svn: 221866
This sends notifications for module load / unload to the process
plugin, and also manages the state more accurately during the
loading sequence.
Similar work by Virgile Bello was referenced during the
implementation of this patch.
Differential Revision: http://reviews.llvm.org/D6224
llvm-svn: 221807
Due to a previous multi-threaded design involving message
passing, we used message classes to pass event information
to the delegate. Since the multi-threaded design has gone
away, we simplify this by passing event arguments as direct
function parameters, which is more clear and easier to
understand.
llvm-svn: 221806
After r221575 TestCallStopAndContinue and TestCallThatRestarts started
crashing on FreeBSD with a null temporary_module_sp in
RegisterContextLLDB::InitializeNonZerothFrame().
llvm-svn: 221805
The addition of RegisterNumber introduced a bug where if the PC is stored in a
return address register, such as on ARM and PowerPC, this register number is
retrieved and used, but never checked in the row if it's saved. Correct this by
setting the variable that's used to the new register number.
Patch by Jason Molenda.
llvm-svn: 221790
Summary:
Taking advantage of the new 'CFAIsRegisterDereferenced' CFA register type, add
full stack unwind support to the PowerPC/PowerPC64 ABI. Also, add a new
register set for powerpc32-on-64, so the register sizes are correct. This also
requires modifying the ProcessMonitor to add support for non-uintptr_t-sized
register values.
Reviewers: jasonmolenda, emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6183
llvm-svn: 221789
Summary:
PowerPC handles the stack chain with the current stack pointer being a pointer
to the backchain (CFA). LLDB currently has no way of handling this, so this
adds a "CFA is dereferenced from a register" type.
Discussed with Jason Molenda, who also provided the initial patch for this.
Reviewers: jasonmolenda
Reviewed By: jasonmolenda
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6182
llvm-svn: 221788
This patch implements basic support for stopping at breakpoints
and resuming later. While a breakpoint is stopped at, LLDB will
cease to process events in the debug loop, effectively suspending
the process, and then resume later when ProcessWindows::DoResume
is called.
As a side effect, this also correctly handles the loader breakpoint
(i.e. the initial stop) so that LLDB goes through the correct state
sequence during the initial process launch.
llvm-svn: 221642
it in RegisterContext.cpp.
There's a lot of bookkeeping code in RegisterContextLLDB where it has
to convert between different register numbering schemes and it makes
some methods like SavedLocationForRegister very hard to read or
maintain. Abstract all of the details about different register numbering
systems for a given register into this new class to make it easier
to understand what the method is doing.
Also add register name printing to all of the logging -- that's easy to
get now that I've got an object to represent the register numbers.
There were some gnarly corner cases of this method that I believe
I've translated correctly - initial testing looks good but it's
possible I missed a corner case, especially with architectures which
uses a link-register aka return address register like arm32/arm64.
Basic behavior is correct but there are a lot of corner casese that are
handled in this method ...
llvm-svn: 221577
If a noreturn function was the last function in a section,
we wouldn't correctly back up the saved-pc value into the
correct section leading to us showing the wrong function in
the backtrace.
Also add a backtrace test with an attempt to elicit this
particular layout. It happens to work out with clang -Os
but other compilers may not quite get the same layout I'm
getting at that opt setting. We'll still be exercising the
basic noreturn handling in the unwinder even if we don't get
one function at the very end of a section.
<rdar://problem/16051613>
llvm-svn: 221575
Originally the idea was that we would queue requests to a master
thread that would dispatch them to other slave threads each
responsible for debugging an individual process. This might make
some scenarios more scalable and responsive, but for now it seems
to be unwarranted complexity for no observable benefit.
llvm-svn: 221561
In the llgs world, ProcessWindows will eventually go away and
we'll implement a different protocol. This patch decouples
ProcessWindows from the core debug loop so that this transition
will not be more difficult than it needs to be.
llvm-svn: 221405
Renamed monitor -> driver, to make clear that the implementation here
is in no way related to that of other process plugins which have also
implemented classes with similar names such as DebugMonitor.
Also created a DebugEventHandler interface, which will be used by
implementors to get notified when debugging events happen in the
inferiors.
llvm-svn: 221322
let's let lldb try the arch default unwind every time but not destructively --
it doesn't permanently replace the main unwind method for that function from
now on.
This fix is for <rdar://problem/18683658>.
I tested it against Ryan Brown's go program test case and also a
collection of core files of tricky unwind scenarios
<rdar://problem/15664282> <rdar://problem/15835846>
<rdar://problem/15982682> <rdar://problem/16099440>
<rdar://problem/17364005> <rdar://problem/18556719>
that I've fixed over the last 6-9 months.
llvm-svn: 221238
is "invalid" -- it is past the end of the stack trace. Add a new
method IsCompletedStackWalk() so we can tell if an invalid stack
frame is from a complete backtrace or if it might be worth re-trying
the last unwind with a different method.
This fixes the unwinder problems Ryan Brown was having with go
programs. The unwinder can (under the right circumstances) still
destructively replace unwind plans permanently - I'll work on
that in a different patch.
<rdar://problem/18683658>
llvm-svn: 221229
When processes are launched for debugging on Windows now, LLDB
will detect changes such as DLL loads and unloads, breakpoints,
thread creation and deletion, etc.
These notifications are not yet propagated to LLDB in a way that
LLDB understands what is happening with the process. This only
picks up the notifications from the OS in a way that they can be
sent to LLDB with subsequent patches.
Reviewed by: Scott Graham
Differential Revision: http://reviews.llvm.org/D6037
llvm-svn: 221207
The details are: large packets (like large memory reads (m packets) or large binary memory reads (x packet)) can get responses that come in across multiple read() calls. The while loop that was added meant that if only a partial packet came in (like only "$abc" coming for a response) GDBRemoteCommunication::CheckForPacket() was called, it would deadlock in the while loop because no more data is going to come in as this function needs to be called again with more data from another read. So the original fix will need to be corrected and resubmitted.
<rdar://problem/18853744>
llvm-svn: 221181
Summary:
SIGPROF is used for profiling processes (with google-perftools for
instance), which results in the inferior receiving a SIGPROF from the
kernel every few milliseconds. Instead of stopping the debugging session
and notifying the user of this, we should just pass the signal and keep
running.
This follows the behavior we have in UnixSignals.cpp.
Test Plan: Run LLDB on linux with a binary using google-perftools, see that execution gets interrupted all the time because we receive SIGPROF. Apply the patch, everything works fine.
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D5953
llvm-svn: 221011
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
function because of a '1u' making it a 32-bit value
when it really needed to be a 64-bit value. Trivial to fix
once I figured out what was going on.
clang static analzyer fixit.
llvm-svn: 220022
in GetFullUnwindPlanForFrame() - the code was mostly checking
that we had an active Process and ABI but not always.
clang static analyzer fixit.
llvm-svn: 219772
This implements Host::LaunchProcess for windows, and in doing so
does some minor refactor to move towards a more modular process
launching design.
The original motivation for this is that launching processes on
windows needs some very windows specific code, which would live
most appropriately in source/Host/windows somewhere. However,
there is already some common code that all platforms use when
launching a process before delegating to the platform specific
stuff, which lives in source/Host/common/Host.cpp which would
be nice to reuse without duplicating.
This commonality has been abstracted into MonitoringProcessLauncher,
a class which abstracts out the notion of launching a process using
an arbitrary algorithm, and then monitoring it for state changes.
The windows specific launching code lives in ProcessLauncherWindows,
and the posix specific launching code lives in ProcessLauncherPosix.
When launching a process MonitoringProcessLauncher is created, and
then an appropriate delegate launcher is created and given to the
MonitoringProcessLauncher.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5781
llvm-svn: 219731
With this change, both local-process llgs and remote-target llgs stdout/stderr
handling from inferior work correctly.
Several log lines have been added around PTY and stdout/stderr redirection
logic on the lldb client side.
Regarding remote llgs execution, see the following:
With these changes, remote llgs with $O now works properly:
$ lldb
(lldb) platform select remote-linux
(lldb) target create ~/some/inferior/exe
(lldb) gdb-remote {some-target}:{port}
(lldb) run
The sequence above will correctly redirect stdout/stderr over gdb-remote $O,
as is needed for remote debugging. That sequence assumes there is a lldb-gdbserver
exe running on the target with {some-host}:{port}.
You can replace the gdb-remote command with a '(lldb) platform connect
connect://{target-ip}:{target-port}'. If you do this and have a
lldb-platform running on the remote end, it will go ahead and launch
llgs for lldb for each target instance that is run/attached.
For local debugging with llgs, the following sequence also works, and
uses local PTYs instead to avoid $O and extra gdb-remote messages:
$ lldb
(lldb) settings set platform.plugin.linux.use-llgs true
(lldb) target create ~/some/inferior/exe
(lldb) run
The above will run the inferior using llgs on the local host, and
will use PTYs rather than $O redirection.
This change also removes the logging that happened after the fork but
before the exec when llgs is launching a new inferior process. Some
aspect of the file handling during that portion of code would not do
the right thing with log handling. We might want to go back later
and have that communicate over a pipe from the child to parent to pass
along any messages that previously were logged in that section of code.
llvm-svn: 219578
See http://reviews.llvm.org/D5695 for details.
This change does the following:
Enable lldb-gdbserver (llgs) usage for local-process Linux debugging.
To turn on local llgs debugging support, which is disabled by default, enable this setting:
(lldb) settings set platform.plugin.linux.use-llgs-for-local true
Adds a stream-based Dump() function to FileAction.
Pushes some platform methods that Linux (and FreeBSD) will want to share with MacOSX from PlatformDarwin into PlatformPOSIX.
Reviewed by Greg Clayton.
llvm-svn: 219457
Adds a test to verify that a thread resume request marks the thread as running
after doing the resume callback. This test fails without the corresponding
ThreadStateCoordinator.cpp change.
Fixes the code where that state was not maintained.
llvm-svn: 219412
the backtrace, try falling back to the architecture default
unwind plan and see if we can backtrace a little further.
<rdar://problem/18556719>
llvm-svn: 219247
As part of getting ConnectionFileDescriptor working on Windows,
there is going to be alot of platform specific work to be done.
As a result, the implementation is moving into Host. This patch
performs the code move and fixes up call-sites appropriately.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5548
llvm-svn: 219143
Added tests and impl to make sure the following errors are reported:
* Notifying a created thread that we are already tracking.
* Notifying a thread death for a thread we don't know about.
llvm-svn: 218900
Now that ThreadStateCoordinator errors out on threads in unexpected states,
it has enough information to know which threads need stop requests fired
when we want to do a deferred callback on a thread's behalf. This change
adds a new method, CallAfterRunningThreadsStop(...), which no longer
takes a set of thread ids that require stop requests. It's much harder
to misuse this method and (with newer error logic) it's harder to
correctly use the original method. Expect the original method that takes
the set of thread ids to stop to disappear in the near future.
Adds several tests for CallAfterRunningThreadsStop().
llvm-svn: 218897
Added tests to verify that the coordinator signals an error if
the given thread to resume is unknown, and if the thread is through to
be running already.
Modified resume handling code to match tests.
llvm-svn: 218872
ThreadStateCoordinator changes:
* Most commands that run in the queue now take an error handler that
will be called with an error string if an error occurs during processing.
Errors generally stop the operation in progress. The errors are checked
at time of execution. This is intended to help flush out ptrace/waitpid/state management
issues as quickly as possible.
* Threads now must be known to the coordinator before stops can be reported,
resumes can be requested, thread deaths can be reported, or deferred stop
notifications can be made. Failure to know the thread will cause the coordinator
to call the error callback for the event being processed. Threads are introduced
to the system by the NotifyThreadCreate method.
* The NotifyThreadCreate method now takes the initial state of the thread being
introduces to the system. We no longer just assume the thread is running.
The test cases were cleaned up, too:
* A gtest test fixture is now used, which allows creating less verbose helper
methods that setup common pieces of callback code for some method invocations.
Net result: the tests are simpler to read and shorter to write.
llvm-svn: 218833
ThreadIDFunc => ThreadIDFunction
LogFunc => LogIDFunction
We try to avoid abbreviations/shortened names. Adjusted function parameter names
as well to replace _func with _function.
llvm-svn: 218773
r218568 added an explicit #include of the Linux ProcessMonitor.h to
POSIXThread.cpp, rather than including just "ProcessMonitor.h" and
relying on the build infrastructure for the appropriate paths.
For now add #ifdefs in the source to use the FreeBSD or Linux header
as appropriate; a cleaner fix (and perhaps some refactoring of the
POSIX classes) should still be done later.
llvm-svn: 218762
There is a state transition that seems potentially buggy that I am capturing and
logging here, and including an explicit test to demonstrate expected behavior. See new test
for detailed description. Added logging around this area since, if we hit it, we
may have a usage bug, or a new state transition we really need to investigate.
This is around this scenario:
Thread C deferred stop notification awaiting thread A and thread B to stop.
Thread A stops.
Thread A requests resume.
Thread B stops.
Here we will explicitly signal the deferred stop notification after thread B
stops even though thread A is now resumed. Copious logging happens here.
llvm-svn: 218683
the user level. It adds the ability to invent new stepping modes implemented by python classes,
and to view the current thread plan stack and to some extent alter it.
I haven't gotten to documentation or tests yet. But this should not cause any behavior changes
if you don't use it, so its safe to check it in now and work on it incrementally.
llvm-svn: 218642
The thread resume block is executed in the normal flow of thread
state queued event processing. The tests verify that it is executed
when we track the thread to be stopped and skipped when we track
it to already be running.
llvm-svn: 218638
Also added a test for the reset handling. The reset/state clearing happens
as a processed queue event. The only diff vs. standard processing is that
the exec clears the queue before queueing the activity to clear internal state.
i.e. once we get an exec, we really stop doing any other queue-based activity.
llvm-svn: 218629
A new thread arriving while a pending signal notification
is outstanding will (1) add the new thread to the list of
stops expected before the deferred signal notification is
fired, (2) send a stop request for the new thread, and
(3) track the new thread as currently running.
llvm-svn: 218578
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
Tested two pending stops before notification, where one of the pending stop
requirements was already known to be stopped.
Tested pending thread stop before notification, then reporting thread with
pending stop died and verifies pending notification is made.
llvm-svn: 218559
Glad I did - caught a bug where the auto variable was not a reference
to a set and instead was a copy. I need to review rules on that!
llvm-svn: 218558
This change does the following:
* Remove test/c++/...
* Add gtest.
* Add gtest/unittest directory for unittesting individual classes.
* Add an initial Plugins/Process?linux/ThreadStateCoordinatorTest.cpp.
- currently failing a test (intentional).
- added a bare-bones ThreadStateCoordinator.cpp to Plugins/Process/Linux,
more soon. Just enough to prove out running gtest on Ubuntu and MacOSX.
* Added recursive make machinery so that doing a 'make' in gtest/ is
sufficient to kick off the existing test several directories down.
- Caveat - I currently short circuit from gtest/unittest/Makefile directly to
the one and only gtest/unittest/Plugins/Process/Linux directory. We'll need
to add the intervening layers. I haven't done this yet since to fix the
Xcode test failure correspondence, I may need to add a python layer which
might just handle the directory crawling.
* Added an Xcode project to the lldb workspace for gtest.
- Runs the recursive make system in gtest/Makefile.
- Default target is 'test'. test and clean are supported.
- Currently does not support test failure file/line correspondence.
Requires a bit of text transformation to hook that up.
llvm-svn: 218460
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
The $A handler was unnecessarily waiting for the launched app to hit a stop
before returning. Removed this code.
Renamed the llgs inferior launching code to LaunchProcessForDebugging ()
to prevent it from possibly being mistaken as code that lldb-platform uses
to launch a debugserver process. We probably want to look at breaking out
llgs-specific and lldb-platform-specific code into separate derived classes,
with common code in a shared base class.
llvm-svn: 218075
There are several places where multiple threads are accessing the same variables simultaneously without any kind of protection. I propose using std::atomic<> to make it safer. I did a special build of lldb, using the google tool 'thread sanitizer' which identified many cases of multiple threads accessing the same memory. std::atomic is low overhead and does not use any locks for simple types such as int/bool.
See http://reviews.llvm.org/D5302 for more details.
Change by Shawn Best.
llvm-svn: 217818
Instead of forcing the remote arch type to MachO all the time, we
inspect the OS/vendor that the remote debug server reports and use it to
set the arch type to MachO, ELF or COFF accordingly.
See thread here for more context:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140915/012968.html
Change by Stephane Sezer.
Tested:
MacOSX 10.9.4 x86_64
Ubuntu 14.04 x86_64
llvm-svn: 217779
This is useful for checking inconsistencies between what the remote debug server thinks we are debugging and we think we are debugging. This follows the check for pointer byte size done just above.
Change by Stephane Sezer.
Tested:
Ubuntu 14.04 x86_64, llvm-3.5-built lldb
MacOSX 10.9.4, Xcode-Beta(2014-09-09)-built lldb.
llvm-svn: 217773
* Fixes the local stack variable return pointer usage in NativeThreadLinux::GetName().
* Changes NativeThreadProtocol::GetName() to return a std::string.
* Adds a unit test to verify thread names don't regress in the future. Currently only run on Linux since I know default thread names there.
llvm-svn: 217717
Apparently, PEEKUSER/POKEUSER is something x86 specific, so I had to rework it for AArch64. This fixes assertion that occurs whenever lldb started on AArch64 device tried to read PC register (or any other register)
See http://reviews.llvm.org/D5232 for more details.
Change by Paul Osmialowski.
llvm-svn: 217691
* Sends a SIGSTOP to the process.
* Fixes busted SIGSTOP handling. Now builds a list of non-stopped
that we wait for the PTRACE group-stop for. When the final must-stop
tid gets its group stop, we propagate the process state change.
Only the signal receiving the notification of the pending SIGSTOP
is marked with the SIGSTOP signal. All the rest, if they weren't
already stopped, are marked as stopped with signal 0.
* Fixes a few broken tests.
* Marks the Linux test I added earlier as expect-pass (no longer XFAIL).
Implements fix for http://llvm.org/bugs/show_bug.cgi?id=20908.
llvm-svn: 217647
This change implements this ticket:
http://llvm.org/bugs/show_bug.cgi?id=20899
Adds the qThreadStopInfo RSP command for llgs and includes a test that
verifies both debugserver and llgs respond with something reasonable
on a multithreaded app.
llvm-svn: 217549
More work on the GetName/SetName arguments (thread_t vs tid_t) is needed
but this change should restore the build and basic operation.
llvm-svn: 217502
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
This makes sure that nothing that requires Python is being built
when the LLDB_DISABLE_PYTHON flag is being passed in.
It also changes a use of CPPFLAGS to CPP.Flags since the former is overridden
when external flags are passed in while the later is not. I'm not sure exactly
why LLDB_DISABLE_PYTHON is in CXXFLAGS rather than CPPFLAGS,
but cleaning that up is for another commit.
Differential Revision: http://reviews.llvm.org/D4918
llvm-svn: 217414
This cleans up a couple of warnings [-Wcovered-switch-default] from the build by
removing the default case from a couple of switches which are fully covered.
This is generally better as it will help identify when a new item is added to
the enumeration but the use sites are not updated.
llvm-svn: 217376
detct unwind loops but there was a code path through there (using
architecture default unwind plans) that didn't do the check, and
could end up with an infinite loop unwind. Move that code into a
separate method and call it from both places where it is needed.
Also remove the use of ABI::FunctionCallsChangeCFA in that check.
I thought about it a lot and none of the architecutres that we're
supporting today can have a looping CFA.
Since the unwinder isn't using ABI::FunctionCallsChangeCFA() and
ABI::StackUsesFrames(), and the unwinder was the only reason
those methods exists, I removed them from the ABI and all its
plugins.
<rdar://problem/17364005>
llvm-svn: 216992
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
This patch accepts environment variables of the form:
LLDB_DEBUGSERVER_EXTRA_ARG_n
where n starts with 1, and may continue nearly indefinitely (up through std::numeric_limits<uint32_t>::max()).
The code loops around, starting with 1, until it doesn't find one of the environment variables. For each one it does find defined, it appends the environment variable's contents to the end of the debugserver/llgs startup command line issued when the stub is started for local debugging.
I am using this to add arbitrary startup commands to the llgs command line for turning on additional logging. For example:
export LLDB_DEBUGSERVER_EXTRA_ARG_1="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_2="log enable -f /tmp/llgs_packets.log gdb-remote packets"
export LLDB_DEBUGSERVER_EXTRA_ARG_3="-c"
export LLDB_DEBUGSERVER_EXTRA_ARG_4="log enable -f /tmp/llgs_process.log lldb process"
llvm-svn: 216745
Yet another step toward ARM64 support. With this commit, lldb-gdbserver started on ARM64 target can be accessed by lldb running on desktop PC and it can process simple commands (like 'continue'). Still ARM64 support lacks NativeRegisterContextLinux_arm64.* code which waits to be implemented.
Based on similar files for Linux x86_64 and Darwin ARM64. Due to common code extraction from Darwin related files, lldb should be tested for any unexpected regression on Darwin ARM64 machines too.
See the following for more details:
http://reviews.llvm.org/D4580http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140825/012670.html
Change by Paul Osmialowski.
llvm-svn: 216737
This change:
* properly captures execs in NativeProcessLinux.
* clears out all non-main-thread thread metadata in NativeProcessLinux on exec.
* adds a DidExec() method to the NativeProcessProtocol delegate.
* clears out the auxv data cache when we exec (on Linux).
This is a small part of the llgs for local Linux debugging work going on here:
https://github.com/tfiala/lldb/tree/dev-llgs-local
I'm breaking it into small patches.
llvm-svn: 216670
I copied this originally based on what debugserver was doing. This appears to
be incorrect and unncessary for Linux. The LinuxSignals on the lldb side
don't look for these and therefore they get handled incorrectly.
Leaving the hook in place since I think darwin will continue to need to
translate those signal numbers.
llvm-svn: 216564
creating the ModuleSpec to load the core file - we won't have a fat
core file and we can end up with cpu subtype mismatches if the core
file header isn't written out completely accurately. We need to
be a little loose in this particular case.
<rdar://problem/17843388>
llvm-svn: 216498
This change addresses this bug:
http://llvm.org/bugs/show_bug.cgi?id=20755
This change:
* Modifies llgs to send triple instead of cputype and cpusubtype when not on Apple platforms in qProcessInfo.
* Modifies lldb's GDBRemoteCommunicationClient to handle the triple returned from qProcessInfo if given.
When given, it will prefer to use triple over cputype and cpusubtype.
* Adds gdb-remote protocol tests to verify that cputype and cpusubtype are specified on darwin, and that triple is specified on Linux.
llvm-svn: 216470
We decided to use assmbly profiler instead of eh_frame for frame 0 because for compiler generated code, eh_frame is usually synchronous(a.k.a. only valid at call site); and we have no way to tell if it's asynchronous or not.
But for x86 & x86_64 compiler generated code:
1. clang & GCC describes all prologue instructions in eh_frame;
2. mid-function stack pointer altering instructions can be easily detected.
So we can grab eh_frame, and use assembly profiler to augment it into asynchronous unwind table.
This change also benefits hand-written assembly; eh_frame for hand-written assembly is often asynchronous,so we have a much better chance to successfully unwind through them.
Change by Tong Shen.
llvm-svn: 216406
This continues the effort to get Host code moved over to HostInfo,
and removes many more instances of preprocessor defines along the
way.
llvm-svn: 216195
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
Fixes include:
1 - added new FileSpec method: bool FileSpec::Readable()
2 - detect when an executable is not readable and give an appropriate error for:
(lldb) file /tmp/unreadablefile
3 - detect when a core file is not readable and give an appropriate error
4 - detect when a specified core file doesn't exist and give an appropriate error
<rdar://problem/17727734>
llvm-svn: 215741
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
i386 eh_frame register numbering, encoding a darwin-specific
bug in the register numbering. Update the definitions to be
the correct values, Darwin can use the register numbers from
debugserver. Patch from Tong Shen.
llvm-svn: 215488
Added llgs/debugserver gdb-remote tests around SIGABRT and SIGSEGV signal reception
notification. Found a few bugs in exception signal handling in Linux llgs. Fixed those.
llvm-svn: 215458
This patch moves the logic of many common socket operations into
its own class lldb_private::Socket. It then modifies the
ConnectionFileDescriptor class, and a few users of that class,
to use this new Socket class instead of hardcoding socket logic
directly.
Finally, this patch creates a common interface called IOObject for
any objects that support reading and writing, so that endpoints
such as sockets and files can be treated the same.
Differential Revision: http://reviews.llvm.org/D4641
Reviewed by: Todd Fiala, Greg Clayton
llvm-svn: 214984
call Target::SetArchitecture instead of modifying a
reference to the target's architecture so that the
target logging can show that the arch has been changed.
llvm-svn: 214667
This patch creates a simple ProcessWindows process plugin.
The only thing it knows how to do currently is create processes.
Differential Revision: http://reviews.llvm.org/D4681
llvm-svn: 214094
GDBRemoteRegisterContext::ReadRegisterBytes and
GDBRemoteRegisterContext::WriteRegisterBytes to ensure we don't try
to read/write off the end of the register buffer. This should never
happen but we've had some target confusion in the past where it
did; adding the checks is prudent to avoid crashing here if it happens
again.
<rdar://problem/16450971>
<rdar://problem/16458182>
llvm-svn: 213829
to the remote side (QStartNoAckMode) - it may take a little longer
than normal to get a reply.
In debugserver, hardcode the priority for several threads so they
aren't de-prioritized when a user app is using system resources.
Also, set the names of the threads.
<rdar://problem/17509866>
llvm-svn: 213828
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
This change enables lldb-platform for Linux. In addition, it does the following:
* fixes Host::GetLLDBPath() to work on Linux/*BSD for ePathTypeSupportExecutableDir-relative paths.
* adds more logging and comments around lldb-platform startup and remote lldb-platform usage.
* refactors lldb-platform remote-* support for Darwin and Linux into PlatformPOSIX. This, in theory, is the bulk of what is needed for *BSD to make remote connections to lldb-platform as well (although I haven't tested that yet). FreeBSD can make similar changes to their Platform* as was made here for PlatformLinux to pick up the rest of the bits.
* teaches GDBRemoteCommunication to use lldb-gdbserver for non-Apple hosts.
llvm-svn: 213707
Also track down the required binary by trying to locate the main executable module through LLDB's symbol and executable file locating code.
<rdar://problem/16570258>
llvm-svn: 213199
Now that llgs supports communicating the 0-port choose-a-port
mechanism and can communicate that back to a caller via the
--named-pipe option (at parity with debugserver), we use this
mechanism to always start llgs and debugserver gdb-remote
protocol tests without needing to use some port arbitration
mechanism. This eliminates some potential intermittent failures vs. the
previous random port and collision-avoidance strategy used.
llvm-svn: 212923
These fix the broken debian lldb build, which is using g++ 4.7.2.
TypeFormat changes:
1. stopped using the C++11 "dtor = default;" construct.
The generated default destructor in the two derived classes wanted
them to have a different throws() semantic that was causing 4.7 to
fail to generate it. I switched these to empty destructors defined
in the .cpp file.
2. Switched the m_types map from an ordered map to an unordered_map.
g++ 4.7's c++ library supports the C++11 emplace() used by TypeFormat
but the same c++ library's map impl does not. Since TypeFormat didn't
look like it depended on ordering in the map, I just switched it to
a std::unordered_map.
NativeProcessLinux - g++ 4.7 chokes on lexing the "<::" in
static_cast<::pid_t>(wpid). g++ 4.8+ and clang are fine with it.
I just put a space in between the "<" and the "::" and that cleared
it up.
llvm-svn: 212681
See http://reviews.llvm.org/D4366 for details.
Change by Paul Paul Osmialowski
Today this is the only problem that I'm facing trying to cross-compile lldb for AArch64 using Linaro's toolchain.
PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS, PTRACE_SETFPREGS are not defined for AArch64
These things can be defined different ways for other architectures, e.g. for x86_64 Linux, asm/ptrace-abi.h defines them as preprocessor constants while sys/ptrace.h defines them in enum along with corresponding PT_* preprocessor constants
NativeProcessLinux.cpp includes sys/ptrace.h
To avoid accidental redefinition of enums with preprocessor constants, I'm proposing this patch which first checks for PT_* preprocessor constants then checks for PTRACE_* constants then when it still can not find them, it defines preprocessor constants.
Similar approach was already used for PTRACE_GETREGSET and PTRACE_SETREGSET constants; in this case however it was easier, since enum values in sys/ptrace.h and preprocessor constants shared all exactly the same names (e.g. there's no additional PT_GETREGSET name defined).
llvm-svn: 212225
off_t is a type which is used for file offsets. Even more
specifically, it is only used by a limited number of C APIs that
deal with files. Any usage of off_t where the variable is not
intended to be used with one of these APIs is a bug, by definition.
This patch corrects some easy mis-uses of off_t, generally by
converting them to lldb::offset_t, but sometimes by using other
types such as size_t, when appropriate.
The use of off_t to represent these offsets has worked fine in
practice on linux-y platforms, since we used _FILE_OFFSET_64 to
guarantee that off_t was a uint64. On Windows, however,
_FILE_OFFSET_64 is unrecognized, and off_t will always be 32-bit.
So the usage of off_t on Windows actually leads to legitimate bugs.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4358
llvm-svn: 212192
- Ported the SWIG wrapper shell scripts to Python so that they would work on Windows too along with other platforms
- Updated CMake handling to fix SWIG errors and manage sym-linking on Windows to liblldb.dll
- More build fixes for Windows
The pending issues are that two Python modules, termios and pexpect are not available on Windows.
These are currently required for the Python command interpreter to be used from within LLDB.
llvm-svn: 212111
There were a few places where we were not catching the possibility of negative
error codes in waitpid() calls. This change fixes those remaining after
the llgs branch fixes to ProcessMonitor.
Change by Shawn Best.
llvm-svn: 212107
With _HAS_EXCEPTIONS=0, Windows' version of <thread> will fail to
compile because it calls __uncaught_exception(), which is compiled
out due to _HAS_EXCEPTIONS=0. This just creates a stub version
of __uncaught_exception() which always fails.
llvm-svn: 212076
Also moves NativeRegisterContextLinux* files into the Linux directory.
These, like NativeProcessLinux, should only be built on Linux or a cross
compiler with proper headers.
llvm-svn: 212074
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Both NativeProcessLinux (in llgs branch) and Linux Host.cpp had similar code to handle /proc
file reading. I factored that out into a new Linux-specific ProcFileReader class and added a method
that the llgs branch will use for line-by-line parsing.
This change also adds numerous Linux-specific files to Xcode that were missing from the Xcode
project files.
Related to https://github.com/tfiala/lldb/issues/27
llvm-svn: 212015
Replace adhoc inline implementation of llvm::array_lengthof in favour of the
implementation in LLVM. This is simply a cleanup change, no functional change
intended.
llvm-svn: 211868
mistake in the lock acquistion in HistoryUnwind and HistoryThread.
We've got a deadlock with one use case of HistoryUnwind; I
need to figure out what lock ordering is causing this and fix
it for real.
<rdar://problem/17411904>
llvm-svn: 211541
When a stub reported $#00 (unsupported) for _M and _m
packets, the unsupported response was not handled and
the client then marked the _M/_m commands as definitely
supported. However, they would always fail, preventing
lldb's fallback InferiorCallMmap-based allocation strategy
from being used to attempt to allocate memory in the inferior
process space.
llvm-svn: 211425
to modify the same UnwindTable object simultaneously. Fix
HistoryThread and HistoryUnwind's mutex lock acqusition to
retain the lock for the duration of the operation instead of
releasing the temporary immediately.
<rdar://problem/17055023>
llvm-svn: 211241
Issue discovered during the GSoC 2014 project implementing FreeBSD
kernel support. The existing elf-core Process plugin crashed trying
to read from /dev/mem (the kernel memory device).
Patch by Mike Ma.
llvm-svn: 211102
RegisterSets are assumed to be terminated by this value. Loops over
register set values would fail without LLDB_INVALID_REGNUM terminating
the list. This change adjusts the static check to account for the
size of the register set regnum list being one larger than the expected
valid register set count.
llvm-svn: 210964
Address the 'variable set but not used' warning from GCC. In some cases a few
additional calls were removed where there should be no visible side effects of
the calls (i.e. should not effect any cached state).
llvm-svn: 210879
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
Changes include:
- ObjectFileMachO can now determine if a binary is "*-apple-ios" or "*-apple-macosx" by checking the min OS and SDK load commands
- ArchSpec now says "<arch>-apple-macosx" is equivalent to "<arch>-apple-ios" since the simulator mixes and matches binaries (some from the system and most from the iOS SDK).
- Getting process inforamtion on MacOSX now correctly classifies iOS simulator processes so they have "*-apple-ios" architectures in the ProcessInstanceInfo
- PlatformiOSSimulator can now list iOS simulator processes correctly instead of showing nothing by using:
(lldb) platform select ios-simulator
(lldb) platform process list
- debugserver can now properly return "*-apple-ios" for the triple in the process info packets for iOS simulator executables
- GDBRemoteCommunicationClient now correctly passes along the triples it gets for process info by setting the OS in the llvm::Triple correctly
<rdar://problem/17060217>
llvm-svn: 209852
This fixes a number of trivial warnings in the Windows build. This is part of a larger effort to make the Windows build warning-free.
See http://reviews.llvm.org/D3914 for more details.
Change by Zachary Turner
llvm-svn: 209749
read requests into smaller chunks; some remote kdp stubs
cannot handle memory reads larger than a KB or two & will
error out.
<rdar://problem/16983125>
llvm-svn: 209341
debugserver now returns $X09 as the immediate response to
a $k kill process request rather than $W09.
ProcessGDBRemote now properly handles X as indication of
a process exit state.
The @debugserver_test and @lldb_test for $k now properly expects
an X notification (signal-caused exit) after killing a just-attached
inferior that was still in the stopped state.
llvm-svn: 209108
Also moved it into the lldb_private namespace.
The llgs branch is making use of this interface and its use is not
strictly limited to POSIX.
llvm-svn: 209016
See thread here:
http://lists.cs.uiuc.edu/pipermail/lldb-dev/2014-May/003992.html
This is meant to address case 3 that I recently broke with an earlier
change to rectify usage of the $qC message for thread ids, specifically:
3. TOT lldb <=> gdbserver (without $qProcessInfo support and not Apple/iOS).
llvm-svn: 208741
$qC from debugserver now returns the current thread's thread-id (and, like $?, will set a current thread if one is not already selected). Previously it was returning the current process id.
lldb will now query $qProcessInfo to retrieve the process id. The process id is now cached lazily and reset like other cached values. Retrieval of the process id will fall back to the old $qC method for vendor==Apple and os==iOS if the qProcessInfo retrieval fails.
Added a gdb remote protocol-level test to verify that $qProcessInfo reports a valid process id after launching a process, while the process is in the initial stopped state. Verifies the given process id is a currently valid process on host OSes for which we know how to check (MacOSX, Linux, {Free/Net}BSD). Ignores the live process check for OSes where we don't know how to do this. (I saw no portable way to do this in stock Python without pulling in other libs).
llvm-svn: 208241
data if it is available.
Change ProcessGDBRemote's maximum read/write packet size from a
fixed 512 byte value to asking the remote gdb stub what its maximum
is, using up to 128kbyte sizes if that's allowed, and falling back
to 512 if the remote gdb stub doesn't advertise a max packet size.
Add a new "process plugin packet xfer-size" command that can be used
to override the maximum packet size (although not exceeding any packet
size maximum published by the remote gdb stub).
<rdar://problem/16032150>
llvm-svn: 208058
Add a callback that will allow an expression to be cancelled between the
expression evaluation stages (for the ClangUserExpressions.)
<rdar://problem/16790467>, <rdar://problem/16573440>
llvm-svn: 207944
- CTRL+C wasn't clearing the command in lldb
- CTRL+C doesn't work in python macros in lldb
- Ctrl+C no longer interrupts the running process that you attach to
<rdar://problem/15949205>
<rdar://problem/16778652>
<rdar://problem/16774411>
llvm-svn: 207816
currently associated with a given thread, on relevant targets.
Change the queue detection code to verify that the queues
associated with all live threads are included in the list.
<rdar://problem/16411314>
llvm-svn: 207160
When compiling on Linux with GCC 4.8, compilation would fail due to the use of
the offsetof macro. This is a standard macro, defined in stddef.h. Include
this header to ensure that offsetof is declared.
llvm-svn: 206702
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
On FreeBSD ptrace(PT_KILL) is used to terminate the traced process
(as if PT_CONTINUE had been used with SIGKILL as the signal to be
delivered), and is the desired behaviour for ProcessPOSIX::DoDestroy.
On Linux, after ptrace(PTRACE_KILL) the traced process still exists
and can be interrogated. It is only upon resume that it exits as though
it received SIGKILL.
As the Linux PTRACE_KILL behaviour is not used by LLDB, rename
BringProcessIntoLimbo to Kill, and change the implementation to simply
call kill() instead of using ptrace.
Thanks to Todd F for testing (Ubuntu 12.04, gcc 4.8.2).
Sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3159
llvm-svn: 205337
Store the gpr data in a DataBufferHeap and use a DataExtractor to
extract register values with appropriate endianness. This avoids hard-
coding the register count, and with some further work would allow this
class to provide generic register context storage for any CPU.
llvm-svn: 205329
On FreeBSD ptrace(PT_KILL) is used to terminate the traced process
(as if PT_CONTINUE had been used with SIGKILL as the signal to be
delivered), and is the desired behaviour for ProcessPOSIX::DoDestroy.
On Linux, after ptrace(PTRACE_KILL) the traced process still exists
and can be interrogated. It is only upon resume that it exits as though
it received SIGKILL.
For now I'm committing only the FreeBSD change, until the Linux change
(review D3159) is successfully tested.
http://llvm.org/pr18894
llvm-svn: 205315
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
condition where we could end up killing debugserver (and thus the target) before it had a chance
to detach.
Also fix debugserver to send the OK AFTER it detaches to avoid the same race condition.
<rdar://problem/16202713>
llvm-svn: 205043
(lldb) b puts
(lldb) expr -g -i0 -- (int)puts("hello")
First we will stop at the entry point of the expression before it runs, then we can step over a few times and hit the breakpoint in "puts", then we can continue and finishing stepping and fininsh the expression.
Main features:
- New ObjectFileJIT class that can be easily created for JIT functions
- debug info can now be enabled when parsing expressions
- source for any function that is run throught the JIT is now saved in LLDB process specific temp directory and cleaned up on exit
- "expr -g --" allows you to single step through your expression function with source code
<rdar://problem/16382881>
llvm-svn: 204682
This is a mechanical cleanup of unused functions. In the case where the
functions are referenced (in comment form), I've simply commented out the
functions. A second pass to clean that up is warranted.
The functions which are otherwise unused have been removed. Some of these were
introduced in the initial commit and not in use prior to that point!
NFC
llvm-svn: 204310
Fix Windows build by adding JITLoaderGDB and ProcessElfCore.
RegisterContext: fixes for Windows build: sizeof(GPR::register) didn't work, switched to sizeof(((GPR*)NULL)->register).
llvm-svn: 203667
memcpy cannot be passed NULL. Ensuring that the destination pointer is non-NULL
requires checking success. Rather than performing the success check at that
point, increasing indentation an additional level, fold it into the previous
statement.
llvm-svn: 203359
not going to key off of the ELF object file like I'd intended.
Revert my change in r203205; also revert Greg's change in
r203107 which builds ProcessElfCore on non-Linux/FreeBSD systems
for the moment until we can straighten this out.
llvm-svn: 203207
ProcessMachCore because it doesn't check the format of the file up front. (this is only now
happening because of Greg's change in r203178 to build ProcessElfCore for non-Linux/FreeBSD
hosts).
<rdar://problem/16257533>
llvm-svn: 203205
hold a strong pointer to that extended backtrace thread in the Process
just like we do for asking a thread's extended backtrace.
Also, give extended backtrace threads an invalid ThreadIndexID number.
We'll still give them valid thread_id's. Clients who want to know the
original thread's IndexID can call GetExtendedBacktraceOriginatingIndexID().
<rdar://problem/16126034>
llvm-svn: 203088
ProcessGDBRemote::GetAuxvData obtains the auxv from a remote gdbserver (via a binary-data packet), and returns the data as a DataBufferSP.
The patch includes a small fix to GDBRemoteCommunicationClient::SendPacketsAndConcatenateResponses() to support binary file format packet returns (by not assuming each binary packet is a null-terminated string when concatenating them).
llvm-svn: 202907
This change uses a fixed known offset for the Linux i386 DR0 register.
This change also undoes the 32-bit wordsize change from r169645 that
revolved around being 32-bit/64-bit friendly in
WriteRegOperation::Execute within the Linux ProcessMonitor.cpp. I ran
all the tests on x86_64 Linux with no failures. I also ran some simple
tests with 32-bit Linux exe on x86_64 host and 32-bit linux exe on
i686 32-bit host and these worked fine.
Note (from Todd): the UserData struct in the Linux i386 register
context (only used by Linux i386 host running Linux 32-bit inferior)
is out of sync with what shows up in the sys/user.h for an 32-bit
Linux build (per an earlier change of mine to make it look more like
x86_64 host running x86 exe). I think we should (1) make i386 Linux
targets run using the same register context (and correct ones) on i386
and x86_64 linux hosts if that is possible, and (2) we could use some
tests around the register handling, particularly to verify things like
DR0 registers are in the right spots on host/target combos that we can
verify vs. known correct values.
Change by Matthew Gardiner.
llvm-svn: 202887
This seems a little more straightforward and is equivalent to r201457
for ELF core files. A case for FreeBSD i386 is also added (it was
incorrectly using the 64-bit register context and corrupting mememory).
Better (user-facing) error handling is still needed.
Review: http://llvm-reviews.chandlerc.com/D2765
llvm-svn: 202549
This change fixes up issues with specifying the size of the i386
register infos for FPU registers. The bug was that for the i386
register context, the size of the FPU registers were still being
computed based on the x86_64 FXSAVE structure.
This change permits the FPR_SIZE macro to optionally be defined
outside of RegisterInfos_i386.h, which RegisterContextLinux_i386.cpp
does properly. It redefines the FPR_i386 structure with all the
accessible parts that RegisterInfos_i386.h wants to see, which we had
not done before when we made the overall size of the structure
properly sized a recently.
This change also modifies POSIXThread to create a
RegisterContextLinux_i386 only when the host is 32-bit; otherwise, it
uses the RegisterContextLinux_x86_64, which works properly for 32-bit
and 64-bit inferiors on a 64-bit host.
I tested this debugging a Linux x86 exe on an x86 host (Ubuntu 13.10
x86), and debugging a Linux x86 exe and a Linux x86-64 exe on an
x86-64 host (Ubuntu 12.04 LTS). Those cases all worked.
Thanks to Matthew Gardiner who discoverd may key insights into
tracking down the issue. The motivation for this change and some of
the code originates from him via this thread:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140224/010554.html
llvm-svn: 202428
This fix changes thee x86 32-bit floating point register area to be
the proper size independent of the host platform.
Note as of this change list, this register context is not yet used
since selecting it exposes issues with watchpoint assertions.
Change by Matthew Gardiner.
llvm-svn: 202285
class. If we try to unwind a stack frame to find a caller stack
frame, and we fail to get a valid-looking frame, AND if the UnwindPlan
we used is an assembly-inspection based UnwindPlan, then we should
throw away the assembly-inspection UnwindPlan and try unwinding with
the architectural default UnwindPlan.
This code path won't be taken if eh_frame unwind instructions are available -
lldb will always prefer those once it's off the zeroth frame.
The problem I'm trying to fix here is the class of unwind failures that
happen when we have hand-written assembly on the stack, with no eh_frame,
and lldb's assembly parser fails to understand the assembly. People usually
write their hand-written assembly to follow the frame-pointer-preserving
conventions of the platform so the architectural default UnwindPlan will
often work. We won't have the spill location for most of the non-volatile
registers if we fall back to this, but it's better than stopping the unwind
prematurely.
This is a bit of a tricky change that I believe is correct, but if we get
unwinds that go of into the weeds / unwind bogus frames at the end of the
stack, I'll need to revisit it.
<rdar://problem/16099440>
llvm-svn: 201839
Implement x86_64 debug register read/write in support of hardware
watchpoints. Hoist LinuxThread::TraceNotify code back into
POSIXThread::TraceNotify()
Patch by John Wolfe.
We still need to rework this later to avoid the #ifdef FreeBSD.
llvm-reviews.chandlerc.com/D2572
llvm.org/pr16706
llvm-svn: 201706
This way the same RegisterContext class can support i386 and
amd64/x86_64 core files.
With some further refinement we should be able to merge all of the
processor-specific RegisterContextPOSIX_* classes into a single shared
one.
llvm-svn: 201577
ProcessElfCore::ParseThreadContextsFromNoteSegment was leaking
ThreadData for each ELF note found in core file. We now allocate it
only once and use std::unique_ptr to ensure it is always being freed.
While at it make ParseFreeBSDThrMisc and ParseFreeBSDPrStatus take
ThreadData by reference, rather than pointer, since those arguments are
not optional.
Patch by Piotr Rak.
http://llvm-reviews.chandlerc.com/D2813
llvm-svn: 201473
This seems like a more straightforward approach for instantiating the
appropriate RegisterContext* class, made possible by Michael Sartain's
cleanup of the POSIX RegisterContext class hierarchy in r190647.
Better (user-facing) error handling is still needed.
llvm-svn: 201457
specify a list of functions which should be treated as trap handlers.
This will be primarily useful to people working in non-user-level
process debugging - kernels and other standalone environments.
For most people, the trap handler functions provided by the Platform
plugin will be sufficient.
<rdar://problem/15835846>, <rdar://problem/15982682>
llvm-svn: 201386
Michael Sartain refactored RegisterContextPOSIX_* in r192332, and I must
have missed the now-shadowed variable when I rebased the FreeBSD MIPS64
register context after that.
llvm-svn: 201334
aka asynchronous signal handlers, which subclasses should fill
in as appropriate. For most Unix user process environments,
the one entry in this list is _sigtramp. For bare-board and
kernel environments, there will be different sets of trap
handlers.
The unwinder needs to know when a frame is a trap handler
because the rules it enforces for the frame "above" the
trap handler is different from most middle-of-the-stack frames.
<rdar://problem/15835846>
llvm-svn: 201300
Elf core files were collapsing core segments when the virtual memory
addresses were contiguous without checking if the core-file-backed
memory region was the same size as the segment's VMA region. Without
this extra check, any time regions were collapsed but the core-backed
region was smaller (and thus had a zero-filled hole at the end), the
collapse operation would break VMA to core file lookups for subsequent
collapsed regions.
This change fixes the following bug:
http://llvm.org/bugs/show_bug.cgi?id=18769
llvm-svn: 201214
libldi library to collect extended backtrace information; switch
to the libBacktraceRecording library and its APIs. Complete the
work of adding QueueItems to Queues and allow for the QueueItems
to be interrogated about their extended backtraces in turn.
There's still cleanup and documentation to do on this code but the
code is functional and I it's a good time to get the work-in-progress
checked in.
<rdar://problem/15314027>
llvm-svn: 200822
Fixes http://llvm.org/bugs/show_bug.cgi?id=18656.
Note this exposes a failure on Linux of
TestInferiorAssert.test_inferior_asserting_disassemble, similar to how
it fails on FreeBSD. I'll file a bug for this next. We're now getting
another frame beyond where we used to prior to this fix, so the fix is
exposing failures in previosly not-reachable frames.
Much thanks to Jason Molenda, who had much to do with helping figure
out where unwinding was breaking.
llvm-svn: 200600
GDBProcessCommunicationServer now optionally takes a PlatformSP that
defaults to the default platform for the host.
GDBProcessCommunicationServer::LaunchProcess () now uses the platform
to launch the process.
lldb-gdbserver now takes an optional --platform={platform_plugin_name}
or -p {platform_plugin_name} command line option. If no platform is
specified, the default platform for the host is used; otherwise, if
the platform_plugin_name matches a registered platform plugin or
matches the default platform's name (which is not necessarily
registered by name in the case of 'host'), that platform is used. If
the platform name cannot be resolved, lldb-gdbserver exits after
printing all the available platform plugin names and the default
platform plugin name.
llvm-svn: 200266
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
if the remote stub provided enough information to identify it in the
qProcessInfo packet response. (e.g. for an Apple device where we know
it is Mach-O, the cpu type & cpu sub type).
<rdar://problem/15847901>
llvm-svn: 200253
This change modifies the 'A' command handler's launch code to launch
with LaunchProcess (). The net effect is that the default process
monitoring that LaunchProcess () adds will kick in, allowing the
GDBRemoteCommunicationServer to be able to reap processes started with
this facility correctly. Later, in the case of lldb-gdbserver, we'll
also have the proper process monitoring going on to really debug the
inferior process.
llvm-svn: 200246
This patch addresses a bug where in a multi-threaded program a new
signal from the inferior may be received before all group-stop
messages from an earlier signal have been handled.
Patch by Andrew MacPherson
llvm-svn: 200226
There are a couple of pieces:
* some lazy-evaluation members that store info listed in a qSupported response
* new method SendPacketsAndConcatenateResponses which is used for
fetching fixed-size objects from the remote gdbserver by using multiple
packets if necessary (first use will be to fetch shared-library XML files).
llvm-svn: 200072
right after the space for it is allocated on the stack, instead of trying
to initialize it in all the different places in this method. It's too easy
for another uninitialized code path to sneak in as it is written right now.
llvm-svn: 200066
GDBRemoteCommunicationServer::LaunchProcess () now uses the built-up
ProcessLaunchArgs rather than clearing and setting items from the
function arguments. I added setters for the arguments and launch
flags, which lldb-gdbserver uses for its specification of the
commandline-specified startup app (if one is specified).
LaunchProcess () also adds a new reaper monitor that it applies to
the launched process if no process monitor has already been applied.
This addresses an issue where the 'k' command would generate (possibly
false) warnings about not being able to positively state whether a
killed process actually terminated. GDBRemoteCommunicationServer now
definitely knows the disposition of its children.
llvm-svn: 199959
lldb-gdbserver was launching the commandline-specified launch process
directly, without GDBRemoteCommunicationServer knowing anything about
it. As GDBRemoteCommunicationServer is the piece that manages and
knows about processes that the gdb remote protocol discusses with
the client end, it is important that it know about launched processes.
This change also implements the k gdb remote protocol message, having it
kill all known spawned processes when it is received.
(Note: in lldb-gdbserver, the spawned processes are not properly
monitored yet. The response to the k packet will complain that
spawned processes do not really appear to be getting killed even if
they are. This will get addressed soon.)
llvm-svn: 199945
ArchSpec now contains an optional distribution_id, with getters and
setters. Host::GetArchitecture () sets it on non-Apple platforms using
Host::GetDistributionId (). The distribution_id is ignored during
ArchSpec comparisons.
The gdb remote qHostInfo message transmits it, if set, via the
distribution_id={id-value} key/value pair. Updated gdb remote docs to
reflect this change.
As before, GetDistributionId () returns nothing on non-Linux platforms
at this time. On Linux, it is returned only if the lsb_platform
command is installed (in /bin or /usr/bin), and only if the
distributor id key is returned by 'lsb_platform -i'. This id is
lowercased, and whitespace is replaced with underscores.
llvm-svn: 199539
symbols correctly. There were a couple of pieces to this.
1) When a breakpoint location finds itself pointing to an Indirect symbol, when the site for it is created
it needs to resolve the symbol and actually set the site at its target.
2) Not all breakpoints want to do this (i.e. a straight address breakpoint should always set itself on the
specified address, so somem machinery was needed to specify that.
3) I added some info to the break list output for indirect symbols so you could see what was happening.
Also I made it clear when we re-route through re-exported symbols.
4) I moved ResolveIndirectFunction from ProcessPosix to Process since it works the exact same way on Mac OS X
and the other posix systems. If we find a platform that doesn't do it this way, they can override the
call in Process.
5) Fixed one bug in RunThreadPlan, if you were trying to run a thread plan after a "running" event had
been broadcast, the event coalescing would cause you to miss the ThreadPlan running event. So I added
a way to override the coalescing.
6) Made DynamicLoaderMacOSXDYLD::GetStepThroughTrampolinePlan handle Indirect & Re-exported symbols.
<rdar://problem/15280639>
llvm-svn: 198976
I previously fixed a bug in the SocketAddress class where SocketAddress::GetPort() wasn't using ntohs() on the port number in the structures.
After fixing this, it broke places where we weren't using ntohs() and htons() correctly.
<rdar://problem/15767514>
llvm-svn: 198902
This change fixes a bug recently introduced in ProcessGDBRemote that
prevented the Python register definition file from getting loaded when
the qRegisterInfo0 response returned $00#.
Patch by Steve Pucci.
llvm-svn: 198742
The former will set the Address object's offset to the load address value if
it is not present in any section; the latter will only set the Address object
if the load addr is contained in one of its sections.
<rdar://problem/15135987>
llvm-svn: 198469
its stack frame is a constructed, fake thing that may not conform
correctly to these rules. This fixes a problem where lldb couldn't
backtrace past an asynchronous signal handler (_sigtramp) frame on
a stack on Mac OS X.
<rdar://problem/15035673>
llvm-svn: 198450
interpret core files that contain both a user
process dyld and a kernel executable in them.
Fix an additional method that needs to be
adjusted depending on this preference as well.
<rdar://problem/15721409>
llvm-svn: 197931
it needs to fall back to using the HostArchitecture if a valid one is not
returned. When doing low-level system debugging we may not have a process
(or the remote stub may not support the qProcessInfo packet) in which case
we should fall back to the architecture we determined via qHostInfo.
<rdar://problem/15713180>
llvm-svn: 197857
The original code was not completely correct, but a form of
this check is necessary to avoid an infinite recursion on
some unwind cases where a function unwinds to itself with the
same CFA. Ashok thought the recursion would be caught in
RegisterContextLLDB but this one isn't - we still need it here.
<rdar://problem/15664282>
llvm-svn: 197761
In those set of patches, Ashok changed Module::ResolveSymbolContextForAddress
so that if it failed to find a symbol for a pc, it could back up
the pc value by 1 and re-search for a symbol.
His change to RegisterContextLLDB.cpp partially duplicates that
behavior but it also removes the separate case where we find a
Symbol for the pc address but it's the wrong symbol -- we need to
handle this as well as the lookup-by-pc-finds-no-symbol case.
The most obvious fallout from this regression was that lldb on
Mac OS X couldn't backtrace past __assert_rtn() which tail-calls
abort(). e.g.
(lldb) bt
* thread #1: tid = 0x5d6ea1, 0x00007fff8ee80866 libsystem_kernel.dylib`__pthread_kill + 10, queue = 'com.apple.main-thread', stop reason = signal SIGABRT
* frame #0: 0x00007fff8ee80866 libsystem_kernel.dylib`__pthread_kill + 10
frame #1: 0x00007fff8eb5835c libsystem_pthread.dylib`pthread_kill + 92
frame #2: 0x00007fff8852ab1a libsystem_c.dylib`abort + 125
frame #3: 0x00007fff884f49bf libsystem_c.dylib`__assert_rtn + 321
frame #4: 0x0000000100000f2c a.out`main + 124
(lldb) dis -c 3 -s 0x7fff884f49b3
libsystem_c.dylib`__assert_rtn + 309:
0x7fff884f49b3: movq %rax, -0x11b96242(%rip) ; gCRAnnotations + 8
0x7fff884f49ba: callq 0x7fff8854fd2c ; symbol stub for: abort
libsystem_c.dylib`basename:
0x7fff884f49bf: pushq %rbp
(lldb)
in this case, __assert_rtn() is immediately followed by basename() and
the changes in r190812 didn't back up the pc value to get the correct
function name / unwind info.
<rdar://problem/15367233>
llvm-svn: 197655
During testing I observed QEMU send "$T02thread:01;#04" upon connection,
before any command from LLDB. This change from gclayton accepts (and
discards) a packet immediately after sending the initial ack, to flush
the GDB remote pipeline.
llvm-svn: 197579
While investigating test suite failures when running the test suite remotely, I noticed we had 3 copies of code that launched a process:
1 - in "process launch" command
2 - SBTarget::Launch() with args
3 - SBTarget::Launch() with SBLaunchInfo
"process launch" was launching through the platform if it was supported (this is needed for remote debugging) and the 2 and 3 were not.
Now all code is in one place.
llvm-svn: 197247
<rdar://problem/15600045>
Due to other recent changes, all connections to GDB servers that didn't support the "QStartNoAckMode" packet would cause us to fail to attach to the remote GDB server.
The problem was that SendPacket* and WaitForResponse* packets would return a size_t indicating the number of bytes sent/received. The other issue was WaitForResponse* packets would strip the leading '$' and the trailing "#CC" (checksum) bytes, so the unimplemented response packet of "$#00" would get stripped and the WaitForResponse* packets would return 0.
These new error codes give us flexibility to to more intelligent things in response to what is returned.
llvm-svn: 196610
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
This gets rid of our hacky "get_random_port()" which would grab a random port and tell debugserver to open that port. Now LLDB creates, binds, listens and accepts a connection by binding to port zero and sending the correctly bound port down as the host:port to connect back to.
Fixed the "ConnectionFileDescriptor" to be able to correctly listen for connections from a specified host, localhost, or any host. Prior to this fix "listen://" only accepted the following format:
listen://<port>
But now it can accept:
listen://<port> // Listen for connection from localhost on port <port>
listen://<host>:<port> // Listen for connection from <host> and <port>
listen://*:<port> // Listen for connection from any host on port <port>
llvm-svn: 196547
This helps ensure that the launched debugserver is ready and listening for a connection. Prior to this we had a race condition.
Consolidate the launching of debugserver into a single place: a static function in GDBRemoteCommunication.
llvm-svn: 196401
Separate ELF note implementations were introduced for core files and
GNU build-id. Move the more general one from elf-core to ObjectFileELF
and use it for build-id as well.
Review: http://llvm-reviews.chandlerc.com/D1902
llvm-svn: 196125
Added _WIN32 guards to new platform features. Using correct SetErrorStringWithFormat within Host when LLDB_DISABLE_POSIX is defined. Also fixed an if defined block.
llvm-svn: 195766
Although ptrace() can be passed a PID or TID for PT_CONTINUE and PT_STEP,
the kernel operates on all threads in the process in both cases. (See
the FOREACH_THREAD_IN_PROC in FreeBSD's sys_process.c:kern_ptrace.)
Make this clear by using the PID from the ProcessMonitor instance.
llvm-svn: 195656
Improved the detection of a valid GDB server where we actually can connect to a socket, but then it doesn't read or write anything (which happens with some USB mux software).
Host::MakeDirectory() now can make as many intermediate directories as needed.
The testsuite now has very initial support for remote test suite running. When running on a remote platform, the setUp function for the test will make a new directory and select it as the working directory on the remote host.
Added a common function that can be used to create the short option string for getopt_long calls.
llvm-svn: 195541
Fixed a bunch of issues with many functions that were added for the platform host IO calls where they might not reply to the packet if the packet was malformed.
Cleaned up error codes.
Added a port offset to allow for connections across a USB mux.
llvm-svn: 195485
--gdbserver-port PORT
--min-gdbserver-port PORT
--max-gdbserver-port PORT
The --gdbserver-port option can be specified multiple times to tell lldb-platform which ports it can use when launching child GDB server processes.
The --min-gdbserver-port and --max-gdbserver-port options allow a range of ports to be specified for use when launching child GDB server processes.
Fixed the code to manage these ports correctly in GDBRemoteCommunicationServer.
Also changed GDBRemoteCommunicationClient to not set a port when sending the "qLaunchGDBServer" packet so that the remote lldb-platform can decide which ports to use. If the lldb-platform was launched with no --gdbserver-port or --min-gdbserver-port/--max-gdbserver-port options, then port 0 is always used and a unix socket is used between the lldb-platform and child GDB server process to coordinate the use of valid port.
llvm-svn: 195300
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273
(and same thing to Thread base class) which can be used when looking
at an ExtendedBacktrace thread; it will try to find the IndexID() of
the original thread that was executing this backtrace when it was
recorded. If lldb can't find a record of that thread, it will return
the same value as IndexID() for the ExtendedBacktrace thread.
llvm-svn: 194912
do anything right now. Add a few new methods to the Thread base
class which HistoryThread needs. I think I updated all the
CMakeLists files correctly for the new plugin.
llvm-svn: 194756
Added two new GDB server packets to debugserver: "QSaveRegisterState" and "QRestoreRegiterState".
"QSaveRegisterState" makes the remote GDB server save all register values and it returns a save identifier as an unsigned integer. This packet can be used prior to running expressions to save all registers.
All registers can them we later restored with "QRestoreRegiterState:SAVEID" what SAVEID is the integer identifier that was returned from the call to QSaveRegisterState.
Cleaned up redundant code in lldb_private::Thread, lldb_private::ThreadPlanCallFunction.
Moved the lldb_private::Thread::RegisterCheckpoint into its own header file and it is now in the lldb_private namespace. Trimmed down the RegisterCheckpoint class to omit stuff that wasn't used (the stack ID).
Added a few new virtual methods to lldb_private::RegisterContext that allow subclasses to efficiently save/restore register states and changed the RegisterContextGDBRemote to take advantage of these new calls.
llvm-svn: 194621
Still working out some of the details of these classes but
I wanted to get the overall structure checked in.
<rdar://problem/15314068>
llvm-svn: 194245
llvm::ArrayRef of arguments rather than taking
a fixed number of possibly-NULL pointers to
arguments.
Also changed ClangFunction::GetThreadPlanToCallFunction
to take the address of the argument struct by value
instead of by reference, since it doesn't actually
modify the value passed into it.
llvm-svn: 194232
It completes the job of using EvaluateExpressionOptions consistently throughout
the inferior function calling mechanism in lldb begun in Greg's patch r194009.
It removes a handful of alternate calls into the ClangUserExpression/ClangFunction/ThreadPlanCallFunction which
were there for convenience. Using the EvaluateExpressionOptions removes the need for them.
Using that it gets the --debug option from Greg's patch to work cleanly.
It also adds another EvaluateExpressionOption to not trap exceptions when running expressions. You shouldn't
use this option unless you KNOW your expression can't throw beyond itself. This is:
<rdar://problem/15374885>
At present this is only available through the SB API's or python.
It fixes a bug where function calls would unset the ObjC & C++ exception breakpoints without checking whether
they were set by somebody else already.
llvm-svn: 194182
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that it
wasn't working out like I intended. Instead I'll try sticking with
the single StackFrame class -- there's too much code duplication to
make a more complicated class hierarchy sensible I think.
llvm-svn: 193983
defines a protocol that all subclasses will implement. StackFrame
is currently the only subclass and the methods that Frame vends are
nearly identical to StackFrame's old methods.
Update all callers to use Frame*/Frame& instead of pointers to
StackFrames.
This is almost entirely a mechanical change that touches a lot of
the code base so I'm committing it alone. No new functionality is
added with this patch, no new subclasses of Frame exist yet.
I'll probably need to tweak some of the separation, possibly moving
some of StackFrame's methods up in to Frame, but this is a good
starting point.
<rdar://problem/15314068>
llvm-svn: 193907
In almost all cases, the misuse is about "%lu" being used instead of the correct "%zu" (even though these are compatible on 64-bit platforms in practice). There are even a couple of cases where "%ld" (ie., signed int) is used instead of "%zu", and one where "%lu" is used instead of "%" PRIu64.
Fixes bug #17551.
Patch by "/dev/humancontroller"
llvm-svn: 193832
Added a new key that we understand for the "qHostInfo" packet: "default_packet_timeout:T;" where T is a default packet timeout in seconds.
This allows GDB servers with known slow packet response times to increase the default timeout to a value that makes sense for the connection.
llvm-svn: 193425
This commit adds an example python file that can be used with 'target-definition-file' setting for Linux gdbserver.
This file has an extra key 'breakpoint-pc-offset' that LLDB uses to determine how much to change the PC
after hitting the breakpoint.
llvm-svn: 192962
queue name out of ProcessGDBRemote and in to the Platform
plugin, specifically PlatformDarwin.
Also add a Platform method to translate a dispatch_quaddr
to a QueueID, and a Thread::GetQueueID().
I'll add an SBThread::GetQueueID() next.
llvm-svn: 192949
::Fork already does this internally, so this was simply leaking file handles.
This fixes the problem where the test suite would occasionally run out of file handles.
llvm-svn: 192929
To make this work this patch extends LLDB to:
- Explicitly track the link_map address for each module. This is effectively the module handle, not sure why it wasn't already being stored off anywhere. As an extension later, it would be nice if someone were to add support for printing this as part of the modules list.
- Allow reading the per-thread data pointer via ptrace. I have added support for Linux here. I'll be happy to add support for FreeBSD once this is reviewed. OS X does not appear to have __thread variables, so maybe we don't need it there. Windows support should eventually be workable along the same lines.
- Make DWARF expressions track which module they originated from.
- Add support for the DW_OP_GNU_push_tls_address DWARF opcode, as generated by gcc and recent versions of clang. Earlier versions of clang (such as 3.2, which is default on Ubuntu right now) do not generate TLS debug info correctly so can not be supported here.
- Understand the format of the pthread DTV block. This is where it gets tricky. We have three basic options here:
1) Call "dlinfo" or "__tls_get_addr" on the inferior and ask it directly. However this won't work on core dumps, and generally speaking it's not a good idea for the debugger to call functions itself, as it has the potential to not work depending on the state of the target.
2) Use libthread_db. This is what GDB does. However this option requires having a version of libthread_db on the host cross-compiled for each potential target. This places a large burden on the user, and would make it very hard to cross-debug from Windows to Linux, for example. Trying to build a library intended exclusively for one OS on a different one is not pleasant. GDB sidesteps the problem and asks the user to figure it out.
3) Parse the DTV structure ourselves. On initial inspection this seems to be a bad option, as the DTV structure (the format used by the runtime to manage TLS data) is not in fact a kernel data structure, it is implemented entirely in useerland in libc. Therefore the layout of it's fields are version and OS dependent, and are not standardized.
However, it turns out not to be such a problem. All OSes use basically the same algorithm (a per-module lookup table) as detailed in Ulrich Drepper's TLS ELF ABI document, so we can easily write code to decode it ourselves. The only question therefore is the exact field layouts required. Happily, the implementors of libpthread expose the structure of the DTV via metadata exported as symbols from the .so itself, designed exactly for this kind of thing. So this patch simply reads that metadata in, and re-implements libthread_db's algorithm itself. We thereby get cross-platform TLS lookup without either requiring third-party libraries, while still being independent of the version of libpthread being used.
Test case included.
llvm-svn: 192922
- Made the dynamic register context for the GDB remote plug-in inherit from the generic DynamicRegisterInfo to avoid code duplication
- Finished up the target definition python setting stuff.
- Added a new "slice" key/value pair that can specify that a register is part of another register:
{ 'name':'eax', 'set':0, 'bitsize':32, 'encoding':eEncodingUint, 'format':eFormatHex, 'slice': 'rax[31:0]' },
- Added a new "composite" key/value pair that can specify that a register is made up of two or more registers:
{ 'name':'d0', 'set':0, 'bitsize':64 , 'encoding':eEncodingIEEE754, 'format':eFormatFloat, 'composite': ['s1', 's0'] },
- Added a new "invalidate-regs" key/value pair for when a register is modified, it can invalidate other registers:
{ 'name':'cpsr', 'set':0, 'bitsize':32 , 'encoding':eEncodingUint, 'format':eFormatHex, 'invalidate-regs': ['r8', 'r9', 'r10', 'r11', 'r12', 'r13', 'r14', 'r15']},
This now completes the feature that allows a GDB remote target to completely describe itself.
llvm-svn: 192858
When debugging with the GDB remote in LLDB, LLDB uses special packets to discover the
registers on the remote server. When those packets aren't supported, LLDB doesn't
know what the registers look like. This checkin implements a setting that can be used
to specify a python file that contains the registers definitions. The setting is:
(lldb) settings set plugin.process.gdb-remote.target-definition-file /path/to/module.py
Inside module there should be a function:
def get_dynamic_setting(target, setting_name):
This dynamic setting function is handed the "target" which is a SBTarget, and the
"setting_name", which is the name of the dynamic setting to retrieve. For the GDB
remote target definition the setting name is 'gdb-server-target-definition'. The
return value is a dictionary that follows the same format as the OperatingSystem
plugins follow. I have checked in an example file that implements the x86_64 GDB
register set for people to see:
examples/python/x86_64_target_definition.py
This allows LLDB to debug to any archticture that is support and allows users to
define the registers contexts when the discovery packets (qRegisterInfo, qHostInfo)
are not supported by the remote GDB server.
A few benefits of doing this in Python:
1 - The dynamic register context was already supported in the OperatingSystem plug-in
2 - Register contexts can use all of the LLDB enumerations and definitions for things
like lldb::Format, lldb::Encoding, generic register numbers, invalid registers
numbers, etc.
3 - The code that generates the register context can use the program to calculate the
register context contents (like offsets, register numbers, and more)
4 - True dynamic detection could be used where variables and types could be read from
the target program itself in order to determine which registers are available since
the target is passed into the python function.
This is designed to be used instead of XML since it is more dynamic and code flow and
functions can be used to make the dictionary.
llvm-svn: 192646
Added a way to set hardware breakpoints from the "breakpoint set" command with the new "--hardware" option. Hardware breakpoints are not a request, they currently are a requirement. So when breakpoints are specified as hardware breakpoints, they might fail to be set when they are able to be resolved and should be used sparingly. This is currently hooked up for GDB remote debugging.
Linux and FreeBSD should quickly enable this feature if possible, or return an error for any breakpoints that are hardware breakpoint sites in the "virtual Error Process::EnableBreakpointSite (BreakpointSite *bp_site);" function.
llvm-svn: 192491
Just pass a Target* into ObjectFileELF::GetImageInfoAddress so that
it can do the extra dereference necessary on MIPS, instead of passing
a flag back to the caller.
Review: http://llvm-reviews.chandlerc.com/D1899
llvm-svn: 192469
MIPS's .dyanamic section is read-only. Instead of using DT_DEBUG for
the pointer to dyld information it uses a separate tag DT_MIPS_RLD_MAP
which points to storage in the read-write .rld_map section, which in
turn points to the dyld information.
Review: http://llvm-reviews.chandlerc.com/D1890
llvm-svn: 192408
Fixed an issue where environment variables that contained special characters '$' and '#' would hose up the GDB server packet. We now use the QEnvironmentHexEncoded packet that has existed for a long time when we need to. Also added code that will stop sending the QEnvironmentHexEncoded and QEnvironment packets if they aren't supported.
llvm-svn: 192373
Based on the POSIX x86_64 register context. This is sufficient for opening
a mips64 (big endian) core file. Subsequent changes will connect the
disassembler, dynamic loader support, ABI, etc.
Review: http://llvm-reviews.chandlerc.com/D1873
(Missed "svn add" on this file in r192335)
llvm-svn: 192336
Based on the POSIX x86_64 register context. This is sufficient for opening
a mips64 (big endian) core file. Subsequent changes will connect the
disassembler, dynamic loader support, ABI, etc.
Review: http://llvm-reviews.chandlerc.com/D1873
llvm-svn: 192335
Use 32-bit register enums without gaps on 64-bit hosts.
Don't show 64-bit registers when debugging 32-bit targets.
Add psuedo gpr registers (ax, ah, al, etc.)
Add mmx registers.
Fix TestRegisters.py to not read ymm15 register on 32-bit targets.
Fill out and move gcc/dwarf/gdb register enums to RegisterContext_x86.h
llvm-svn: 192263
scan-build was complaining about:
The return value from the call to 'setgid' is not checked. If an error occurs in 'setgid', the following code may execute with unexpected privileges
llvm-svn: 191618
- Removes the block in UnwindLLDB::AddOneMoreFrame that tests for a bad stack setup,
since it is neither correct (tests the FP GPR), complete (doesn't consider multi-frame
cycles), nor reachable (the construction of RegisterContextLLDB will fail in the case
where either of the two (why just two?) previous frames have the same canonical frame
address as the frame that we propose adding to the stack).
llvm-svn: 191430
to build out the symbol table as addresses are used, and implements
the mechanism for ELF to add stripped symbols from eh_frame.
Uses this mechanism to allow disassembly for addresses corresponding
to stripped symbols for ELF, and provide hooks to implement this for
PE COFF.
Also removes eSymbolContextTailCall in favor of an option for
ResolveSymbolContextForAddress for consistency with the documentation
for eSymbolContextEverything. Essentially, this is just an option for
interpreting the so_addr.
llvm-svn: 191307
default-at-first-instruction UnwindPlan if we're at the beginning of a function and
the ABI can provide us with an UnwindPlan to get out of there before falling back
to the generic architectural default UnwindPlan (which usually assumes that the stack
has already been set up.)
Update the FuncUnwinders methods to gracefully handle the case where an assembly
profiler may not be available.
Fix a bug where FuncUnwinders::GetUnwindPlanArchitectureDefaultAtFunctionEntry was
returning the wrong UnwindPlan to its caller.
llvm-svn: 191262
Specifically, allows the unwinder to handle the case where sc.function
gets resolved with a pc that is one past the address range of the function
(consistent with a tail call). However, there is no matching symbol.
Adds eSymbolContextTailCall to provide callers with control over the scope
of symbol resolution and to allow ResolveSymbolContextForAddress to handle
tail calls since this routine is common to unwind and disassembly.
llvm-svn: 191102
- ProcessMonitor::[Do|Serve]Operation no longer depend on file descriptors!
- removed unused member functions CloseFD and EnableIPC
- add semaphores to signal when an Operation is ready to be processed/complete.
This commit fixes a bug that was identified under stress-testing (i.e. build
LLVM while running tests) that led to LLDB becoming unresponsive because the
read/write operations on file descriptors in ProcessMonitor were not checked.
Other test runner improvement/convenience:
- pickup environment variables LLDB_LINUX_LOG and LLDB_LINUX_LOG_OPTIONS to
enable (Linux) logging when running the test suite. Example usage:
$ LLDB_LINUX_LOG="mylog.txt" LLDB_LINUX_LOG_OPTIONS="process thread" python dotest.py
llvm-svn: 190820
for the frame is one past the address range of the calling function.
- Lowers the fix from RegisterContextLLDB for use with disassembly
- Fixes one of three issues in the disassembly test in TestInferiorAssert.py
Also adds documentation that explains the resolution depths and interface.
Note: This change affects the resolution scope for eSymbolContextFunction
without impacting the performance of eSymbolContextSymbol.
Thanks to Matt Kopec for his review.
llvm-svn: 190812
and a mach kernel in all the pages of the core file. If it finds
a user-process dyld binary, assume this is a user process that had
a copy of the mach kernel in memory when it crashed (e.g. lldb doing
kernel debugging) even though we found the kernel binary first.
Also, change the error messages about sections extending past the end
of the file to be warnings and make the messages sound less severe.
Most user process core files have one section that isn't included in
the file and there's no reason to worry people about that.
<rdar://problem/14473235>
llvm-svn: 190741
by appending the thread ID to the test packet when
debugserver requires it.
This allows register writing (and, by extension,
expressions) to work on Mac OS X.
llvm-svn: 190007
Instead of directly manipulating the thread list in Launch and Attach,
just rely on RefreshStateAfterStop to populate the initial list.
Review: http://llvm-reviews.chandlerc.com/D1565
llvm-svn: 189889
On Linux there is no separate notion of a process (vs. a thread) for
ptrace(); each thread needs to be individually detached. On FreeBSD
we have a separate process context, and we detach just it.
Review: http://llvm-reviews.chandlerc.com/D1418
llvm-svn: 189666
Some stubs only support g/G packets for registers.
This change makes sure that we check if remote stub supports 'p' packet before using it.
llvm-svn: 189576
- add default timeout of 10s (unil qPlatform_RunCommand supports timeout packets and CommandObjectPlatform is updated to read a timeout flag/setting)
- add a few tests for platform shell
llvm-svn: 189405
- mode_t is defined in <sys/types.h>
- reorganized S_* user rights into win32.h
- Use Host::Kill instead of kill
- Currently #ifdef functions using pread/pwrite.
llvm-svn: 189364
Summary:
This merge brings in the improved 'platform' command that knows how to
interface with remote machines; that is, query OS/kernel information, push
and pull files, run shell commands, etc... and implementation for the new
communication packets that back that interface, at least on Darwin based
operating systems via the POSIXPlatform class. Linux support is coming soon.
Verified the test suite runs cleanly on Linux (x86_64), build OK on Mac OS
X Mountain Lion.
Additional improvements (not in the source SVN branch 'lldb-platform-work'):
- cmake build scripts for lldb-platform
- cleanup test suite
- documentation stub for qPlatform_RunCommand
- use log class instead of printf() directly
- reverted work-in-progress-looking changes from test/types/TestAbstract.py that work towards running the test suite remotely.
- add new logging category 'platform'
Reviewers: Matt Kopec, Greg Clayton
Review: http://llvm-reviews.chandlerc.com/D1493
llvm-svn: 189295
Created new LinuxThread class inherited from POSIXThread and removed linux / freebsd ifdefs
Removed several un-needed set thread name calls
CR (and multiple suggestions): mkopec
llvm-svn: 187545
Instantiate RegisterContext... based on getOS() instead of with
compile-time #ifdef-ery.
The assert() here is unfortunate, but better than crashing with no
explanation.
This change is equivalent to r186865 for elf-core.
llvm-svn: 187422
This change removes the final instances of compile-time #ifdef magic
from the elf core plugin. Also rename the classes to ELFLinux... as
they're specific to Linux.
llvm-svn: 186977
Extracting thread data at parse time simplifies multi-platform support.
This change adds FreeBSD thread names and auxv info.
Thanks to Samuel Jacob for review, testing, and improvements.
llvm-svn: 186975
ELF notes contain a 'name' field, which specifies a vendor who defines
the format of the note. Examples are 'FreeBSD' or 'GNU', or it may be
empty for generic notes.
Add a case for FreeBSD-specific notes, leaving Linux and GNU notes,
other vendor-specific notes, and generic notes to be handled by the
existing code for now.
Thanks to Samuel Jacob for reviewing and suggesting improvements.
llvm-svn: 186973
Instantiate RegisterContextCore... based on getOS() instead of with
compile-time #ifdef-ery.
The assert()s here are unfortunate, but better than crashing with no
explanation. (This would previously happen for an unsupported
architecture, anyhow.)
We should add an equivalent OS and architecture test to
ProcessElfCore::DoLoadCore() and cleanly report the error to the user.
llvm-svn: 186865
On FreeBSD I see that Arch, Vendor, OS, and Environment are unchanged
after this call (for x86_64, at least), and core debugging works without
it.
If we need to restore it we should be able to switch on
arch.GetTriple.getOS() instead of a compile-time #ifdef.
Thanks to Daniel Malea for testing on Linux.
llvm-svn: 186862
RegisterContextLLDB::SavedLocationForRegister to cache the pc and
sp register numbers -- if lldb is debugging multiple Targets of
different architectures, this will be incorrect. If these were
to be cached anywhere, it would have to be up in the Target.
llvm-svn: 186651
On FreeBSD we have only one NT_PRPSINFO in a core file, regardless of the
number of threads. Consider a new thread to start whenever we see another
instance of either NT_PRPSINFO or NT_PRSTATUS.
Thanks to Samuel Jacob for testing this patch on Linux cores.
llvm-svn: 186633
and -fomit-frame-pointer.
- Parses eh_frame FDEs to determine the function address and size so that
the call frame parsing can continue.
Note: This code path is specific to ELF and PECOFF, because ObjectFileMachO
uses LCT_FunctionStarts to efficiently populate the symbol table.
Thanks to Jason Molenda for the review!
llvm-svn: 186585
Compile-time #ifdef-ery isn't right, but this makes core debugging work on
FreeBSD and highlights the parts that will need to be changed for runtime
arch support.
llvm-svn: 186534
Usage: 'lldb a.out -c core'.
TODO: FreeBSD support.
TODO: Support for AVX registers.
TODO: Refactor so that RegisterContextCore* don't inherit from classes that use ProcessMonitor
to fix the build on OS/X.
llvm-svn: 186516
Added a setting to control timeout for kdp response packets. While I was at it, I also added a way to control the response timeout for gdb-remote packets.
KDP defaults to 5 seconds, and GDB defaults to 1 second. These were the default values that were in the code prior to adding these settings.
(lldb) settings set plugin.process.gdb-remote.packet-timeout 10
(lldb) settings set plugin.process.kdp-remote.packet-timeout 10
llvm-svn: 186360
RegisterContextCoreLinux_x86_64 inherits from RegisterContextLinux_x86_64 which inherits from RegisterContext_x86_64 which uses has:
ProcessMonitor &GetMonitor();
This register context used by the core file can't use this since the process plug-in will be ProcessElfCore and the implementation of GetMonitor() does:
ProcessMonitor &
RegisterContext_x86_64::GetMonitor()
{
ProcessSP base = CalculateProcess();
ProcessPOSIX *process = static_cast<ProcessPOSIX*>(base.get());
return process->GetMonitor();
}
ProcessELFCore doesn't, nor should it inherit from ProcessPOSIX and any call to GetMonitor() will fail for ELF core files.
Suggested cleanups:
- Make a register context class that is a base class that doesn't have any reading smarts, then make one that uses ProcessPOSIX and the has the GetMonitor() call, and one that gets its data straight from the core file.
llvm-svn: 186223
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
llvm-svn: 186130
* Use PseudoTerminal to fix stdio handling / passthrough to the inferior
process.
* Add log messages equivalent to the Linux ones.
* Port changes relating to process creation / termination.
This revision contains changes equivalent to (parts of) SVN revisions
109318 142384 166055 168503 169645 177116 182809.
llvm-svn: 185442
The build system is currently miss-identifying GNU/kFreeBSD as FreeBSD.
This kind of simplification is sometimes useful, but in general it's not correct.
As GNU/kFreeBSD is an hybrid system, for kernel-related issues we want to match the
build definitions used for FreeBSD, whereas for userland-related issues we want to
match the definitions used for other systems with Glibc.
The current modification adjusts the build system so that they can be distinguished,
and explicitly adds GNU/kFreeBSD to the build checks in which it belongs.
Fixes bug #16446.
Patch by Robert Millan in the context of Debian.
llvm-svn: 185313
Made sure that temporary object created from HarmonizeThreadIdsForProfileData() doesn’t get passed around without creating an object first.
Reviewed by Greg
llvm-svn: 184769
- Ensures that this container is populated once for the lifetime of lldb
--- In particular, static methods can query this data even after the first RegisterContext has been destroyed.
- Uses a singleton function to avoid global constructors.
Thanks to Greg Clayton for the suggestion!
llvm-svn: 183313
the link register save location being in the link register - in which case we
should iterate down the stack, not recursively try to find the lr in the current
frame over and over.
<rdar://problem/13932954>
llvm-svn: 183282
Fixed ProcessMachCore to be able to locate the main executeable in the core file even if it doesn't start at a core file address range boundary. Prior to this we only checked the first bytes of each range in the core file for mach_kernel or dyld. Now we still do this, but if we don't find the mach_kernel or dyld anywhere, we go through all core file ranges and check every 0x1000 to see if we can find dyld or the mach_kernel.
Now that we can properly detect the mach_kernel at any address, we don't need to call "DynamicLoaderDarwinKernel::SearchForDarwinKernel(Process*)" anymore.
llvm-svn: 182513
-Remove tracing of fork/vfork until we add support for tracing inferiors' children on Linux.
-Add trace exec option for ptrace so that we don't receive legacy SIGTRAP signals on execve calls.
-Add handling of SIGCHLD sent by kernel (for now, deliver the signal to the inferior).
llvm-svn: 182153
- Also refactors TestRegisters.py because test_convenience_registers_with_process_attach now fails with an assert.
TODO: Cross-reference the skipOnLinux decorator with a bugzilla report after root-causing this issue.
llvm-svn: 181737
names when specifying the DynamicLoaderDarwinKernel.
ProcessGDBRemote wasn't setting the dyld string any more; remove
the remaining code tracking the dyld plugin name altogether from
that process plugin.
llvm-svn: 181658
Don't want about being unable to find a needed objective-c runtime
function when we're core file debugging and can't jit anything
anyway. Don't warn when quitting a debug session on a core file,
the program state can be reconstructed by re-running lldb on the
same core file again.
llvm-svn: 181653
<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
llvm-svn: 181631
- Eliminated the use of static for methods that read m_register_infos, so that these routines can be implemented in the base class.
- Eliminated m_register_infos in the base class because this is not used when derived classes call UpdateRegisterInfo.
- Also moved the namespace using declarations from headers to source files.
Thanks to Daniel and Samuel for their review feedback.
llvm-svn: 181538
namespace lldb_private {
class Thread
{
virtual lldb::StopInfoSP
GetPrivateStopReason() = 0;
};
}
To not be virtual. The lldb_private::Thread now handles the correct caching and will call a new pure virtual function:
namespace lldb_private {
class Thread
{
virtual bool
CalculateStopInfo() = 0;
}
}
This function must be overridden by thead lldb_private::Thread subclass and the only thing it needs to do is to set the Thread::StopInfo() with the current stop reason and return true, or return false if there is no stop reason. The lldb_private::Thread class will take care of calling this function only when it is required. This allows lldb_private::Thread subclasses to be a bit simpler and not all need to duplicate the cache and invalidation settings.
Also renamed:
lldb::StopInfoSP
lldb_private::Thread::GetPrivateStopReason();
To:
lldb::StopInfoSP
lldb_private::Thread::GetPrivateStopInfo();
Also cleaned up a case where the ThreadPlanStepOverBreakpoint might not re-set its breakpoint if the thread disappears (which was happening due to a bug when using the OperatingSystem plug-ins with memory threads and real threads).
llvm-svn: 181501
while we develop a better understanding of how to manage the thread lists in a platform-independant fashion.
Reviewed by: Daniel Malea
llvm-svn: 181323
This checkin aims to fix this. The process now has two thread lists: a real thread list for threads that are created by the lldb_private::Process subclass, and the user visible threads. The user visible threads are the same as the real threas when no OS plug-in in used. But when an OS plug-in is used, the user thread can be a combination of real and "memory" threads. Real threads can be placed inside of memory threads so that a thread appears to be different, but is still controlled by the actual real thread. When the thread list needs updating, the lldb_private::Process class will call the: lldb_private::Process::UpdateThreadList() function with the old real thread list, and the function is expected to fill in the new real thread list with the current state of the process. After this function, the process will check if there is an OS plug-in being used, and if so, it will give the old user thread list, the new real thread list and the OS plug-in will create the new user thread list from both of these lists. If there is no OS plug-in, the real thread list is the user thread list.
These changes keep the lldb_private::Process subclasses clean and no changes are required.
llvm-svn: 181091
- Decouples RegisterContext_x86_64 from UserArea.
- Restores the original definition of UserArea so that it can be used to generate offsets for use with ptrace.
- Moves UserArea to the 64-bit Linux specialization.
- Also fixes an off-by-one error for the size of m_gpr.
- Also adds a TODO comment noting the need for a mechanism to identify the correct plugin based on the target OS (and architecture).
Reviewed by: Matt Kopec and Samuel Jacob
llvm-svn: 181055
thread before UnwindLLDB::AddOneMoreFrame calls it quits. We have
a couple of reports of unending backtraces in the field and we
haven't been able to collect any information about what kind of
backtrace is causing this. We've found on Mac OS X that it's tricky
to get more than around 200k stack frames before a process exceeds
its stack space so we're starting with a hard limit of 300,000 frames.
<rdar://problem/13383069>
llvm-svn: 180995
<rdar://problem/13723772>
Modified the lldb_private::Thread to work much better with the OperatingSystem plug-ins. Operating system plug-ins can now return have a "core" key/value pair in each thread dictionary for the OperatingSystemPython plug-ins which allows the core threads to be contained with memory threads. It also allows these memory threads to be stepped, resumed, and controlled just as if they were the actual backing threads themselves.
A few things are introduced:
- lldb_private::Thread now has a GetProtocolID() method which returns the thread protocol ID for a given thread. The protocol ID (Thread::GetProtocolID()) is usually the same as the thread id (Thread::GetID()), but it can differ when a memory thread has its own id, but is backed by an actual API thread.
- Cleaned up the Thread::WillResume() code to do the mandatory parts in Thread::ShouldResume(), and let the thread subclasses override the Thread::WillResume() which is now just a notification.
- Cleaned up ClearStackFrames() implementations so that fewer thread subclasses needed to override them
- Changed the POSIXThread class a bit since it overrode Thread::WillResume(). It is doing the wrong thing by calling "Thread::SetResumeState()" on its own, this shouldn't be done by thread subclasses, but the current code might rely on it so I left it in with a TODO comment with an explanation.
llvm-svn: 180886
- Required for platform-independant handling of general purpose registers (i.e. for core dumps).
Thanks to Samuel Jacob for this patch.
llvm-svn: 180878
- Adds unique enums for ymm registers to the ABI and the POSIX register context.
- Reworks the register context data structures to support a union of FXSAVE and XSAVE
--- Allows the same code base to deal with the FPU independent of the availability of AVX.
- Determine if AVX is supported by attempting to read XSAVE using ptrace.
--- Support an extended register set for avx registers if available.
- Provide a mechanism to assemble/parse register halves into a single ymm buffer for use with RegisterValue.
--- Reworked Read/WriteRegister routines to read/write/parse ymm registers.
Adds tests for ymm register write with read-back, and expressions involving ymm registers.
- Tests vary depending on the availability of an avx register set.
Thanks to Daniel and Matt for their reviews.
llvm-svn: 180572
(normally undefined) as indicating a breakpoint hit, in addition
to the normal (EXC_BREAKPOINT, EXC_ARM_BREAKPOINT) pair.
<rdar://problem/13730366>
llvm-svn: 180216
Providing a dummy RegisterContext to secure against faulty Python OS plugins that do not return a valid RegisterContext
The RegisterContextDummy exports a PC with a constant 0xFFFFFFFFFFFFFFFF value
llvm-svn: 180033
Fixed the GDB remote with the python OS plug-in to not show core threads when they aren't desired and also to have the threads "to the right thing" when continuing.
llvm-svn: 179912
defines a Return Address register (e.g. lr on arm) but the RA register
hasn't been saved anywhere yet -- it is still in a live reg.
<rdar://problem/13503130>
llvm-svn: 179431
Made some fixes to the OperatingSystemPython class:
- If any thread dictionary contains any "core=N" key/value pairs then the threads obtained from the lldb_private::Process itself will be placed inside the ThreadMemory threads and will be used to get the information for a thread.
- Cleaned up all the places where a thread inside a thread was causing problems
llvm-svn: 179405
Don't crash when there is no register context for a thread with kernel debugging. The kernel debugging uses the OperatingSystemPlugin that may behave badly when trying to get thread state, so be prepared to have invalid register contexts in threads.
llvm-svn: 178574
- process in 'unloaded' state was (incorrectly) considered to be alive by POSIX plugin
- above caused a regression in TestProcessLaunch cases
llvm-svn: 178493
- Includes a stub for AVX support in the x86-64 register context and a failing test for register sets that are unavailable.
Thanks to Greg Clayton for his review feedback.
llvm-svn: 178252
- All Linux logging channels now use a single global instance of lldb_private::Log, to handle the case of logging during process tear down.
- Also removed a single use of LogSP in FreeBSD and fixed a typo in a comment while reading through ProcessKDPLog.
Reviewed by Daniel Malea.
llvm-svn: 178242
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
As much as I hate to leave this hacky code in that adds some d and q registers to ARM registers, I must leave it in.
The code is now fixed to not just assume ANY arm target will have registers in a certain order. We now verify the common regs are the same name and byte size before adding the d and q regs.
llvm-svn: 176752
DWARF with .o files now uses 40-60% less memory!
Big fixes include:
- Change line table internal representation to contain "file addresses". Since each line table is owned by a compile unit that is owned by a module, it makes address translation into lldb_private::Address easy to do when needed.
- Removed linked address members/methods from lldb_private::Section and lldb_private::Address
- lldb_private::LineTable can now relink itself using a FileRangeMap to make it easier to re-link line tables in the future
- Added ObjectFile::ClearSymtab() so that we can get rid of the object file symbol tables after we parse them once since they are not needed and kept memory allocated for no reason
- Moved the m_sections_ap (std::auto_ptr to section list) and m_symtab_ap (std::auto_ptr to the lldb_private::Symtab) out of each of the ObjectFile subclasses and put it into lldb_private::ObjectFile.
- Changed how the debug map is parsed and stored to be able to:
- Lazily parse the debug map for each object file
- not require the address map for a .o file until debug information is linked for a .o file
llvm-svn: 176454
in a core file if it didn't start at the beginning of a memory segment.
I added more sophisticated kernel location code to DynamicLoaderDarwinKernel
and removed the simple one in ProcessMachCore. Unfortunately the kernel
DynamicLoader doesn't get a chance to search around in memory unless there's
a hint that this might be a kernel debug session. It was easy ot make the
kernel location code static in DynamicLoaderDarwinKernel and call it from
ProcessMachCore on the start of the session, so that's what I did.
<rdar://problem/13326647>
llvm-svn: 176405
and use it to keep from doing the OS Plugin UpdateThreadList while destroying, since
if that does anything that requires the API lock it may deadlock against whoever is
running the Process::Destroy.
<rdar://problem/13308627>
llvm-svn: 176375
StackFrame assumes m_sc is additive, but m_sc can lose its target. So now the SymbolContext::Clear() method takes a bool that indicates if the target should be cleared. Modified all existing code to properly set the bool argument.
llvm-svn: 175953
Fixed an issue where if we got a 'A' async packet back from debugserver, we would resend the last continue command. We now correctly identify the packet as async (just like the 'O' stdout async packet) and we don't resend the continue command.
llvm-svn: 175924
- generate-vers.pl has to be called by cmake to generate the version number
- parallel builds not yet supported; dependency on clang must be explicitly specified
Tested on Linux.
- Building on Mac will require code-signing logic to be implemented.
- Building on Windows will require OS-detection logic and some selective directory inclusion
Thanks to Carlo Kok (who originally prepared these CMakefiles for Windows) and Ben Langmuir
who ported them to Linux!
llvm-svn: 175795
to have it not named appropriately. Also in StopInfoMachException, we aren't testing for software or not software, just
whether the thing is a breakpoint we set. So don't use "software"...
llvm-svn: 175241
Enhance lldb so it can search for a kernel in memory when attaching
to a remote system. Remove some of the code that was doing this
from ProcessMachCore and ProcessGDBRemote and put it in
DynamicLoaderDarwinKernel.
I've added a new setting, plugin.dynamic-loader.darwin-kernel.scan-type
which can be set to
none - for environments where reading random memory can cause a
device crash
basic - look at one fixed location in memory for a kernel load address,
plus the contents of that address
fast-scan - the default, tries "basic" and then looks for the kernel's
mach header near the current pc value when lldb connects
exhaustive-scan - on 32-bit targets, step through the entire range where
the kernel can be loaded, looking for the kernel binary
I don't have the setting set up correctly right now, I'm getting back unexpected
values from the Property system, but I'll figure that out tomorrow and fix.
Besides that, all of the different communication methods / types of kernels
appear to be working correctly with these changes.
llvm-svn: 173891
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
Change the GDBRemoteRegisterContext::AddRegister function to take
its RegisterInfo argument by value instead of using a reference -
it will modify the object and modifying the contents of the
g_register_infos table in GDBRemoteRegisterContext.cpp can cause a
crash the next time we step through it.
llvm-svn: 173406
Fixed the 32, 16, and 8 bit pseudo regs for x86_64 (real reg of "rax" which subvalues "eax", "ax", etc...) to correctly get updated when stepping. Also fixed it so actual registers can specify what other registers must be invalidated when a register is modified. Previously, only pseudo registers could invalidate other registers.
Modified the LLDB qRegisterInfo extension to the GDB remote interface to support specifying the containing registers with the new "container-regs" key whose value is a comma separated list of register numbers. Also added a "invalidate-regs" key whose value is also a comma separated list of register numbers.
Removed the hack GDBRemoteDynamicRegisterInfo::Addx86_64ConvenienceRegisters() function and modified "debugserver" to specify the registers correctly using the new "container-regs" and "invalidate-regs" keys.
llvm-svn: 173096
Modify UnwindLLDB::SearchForSavedLocationForRegister so if the register
save locations for a register mid-stack is in another register (or in the
same register, indicating the reg wasn't modified in this frame), don't
return that as a found location. Keep iterating down the array of frames
until a concrete location/value for the register is found, or until we
get to frame 0 where the reg value can be used as-is.
If lldb was trying to backtrace a program that blew out its stack via
recursion and the unwind instructions had some kind of
this-reg-is-saved-in-that-reg instruction, lldb would revert to doing
a recursive search for a concrete value and blow out its own stack.
llvm-svn: 172887
Added the ability for OS plug-ins to lazily populate the thread this. The python OS plug-in classes can now implement the following method:
class OperatingSystemPlugin:
def create_thread(self, tid, context):
# Return a dictionary for a new thread to create it on demand
This will add a new thread to the thread list if it doesn't already exist. The example code in lldb/examples/python/operating_system.py has been updated to show how this call us used.
Cleaned up the code in PythonDataObjects.cpp/h:
- renamed all classes that started with PythonData* to be Python*.
- renamed PythonArray to PythonList. Cleaned up the code to use inheritance where
- Centralized the code that does ref counting in the PythonObject class to a single function.
- Made the "bool PythonObject::Reset(PyObject *)" function be virtual so each subclass can correctly check to ensure a PyObject is of the right type before adopting the object.
- Cleaned up all APIs and added new constructors for the Python* classes to they can all construct form:
- PyObject *
- const PythonObject &
- const lldb::ScriptInterpreterObjectSP &
Cleaned up code in ScriptInterpreterPython:
- Made calling python functions safer by templatizing the production of value formats. Python specifies the value formats based on built in C types (long, long long, etc), and code often uses typedefs for uint32_t, uint64_t, etc when passing arguments down to python. We will now always produce correct value formats as the templatized code will "do the right thing" all the time.
- Fixed issues with the ScriptInterpreterPython::Locker where entering the session and leaving the session had a bunch of issues that could cause the "lldb" module globals lldb.debugger, lldb.target, lldb.process, lldb.thread, and lldb.frame to not be initialized.
llvm-svn: 172873
Swap in index ids for thread ids in GDBRemoteCommunicationClient. Besides dealing with the async logic, I have to take care of the situation when the inferior paused as well.
llvm-svn: 172869
controlled by the --unwind-on-error flag, and --ignore-breakpoint which separately controls behavior when a called
function hits a breakpoint. For breakpoints, we don't unwind, we either stop, or ignore the breakpoint, which makes
more sense.
Also make both these behaviors globally settable through "settings set".
Also handle the case where a breakpoint command calls code that ends up re-hitting the breakpoint. We were recursing
and crashing. Now we just stop without calling the second command.
<rdar://problem/12986644>
<rdar://problem/9119325>
llvm-svn: 172503
Python OS plug-ins now fetch thread registers lazily.
Also changed SBCommandInterpreter::HandleCommand() to not take the API lock. The logic here is that from the command line you can execute a command that might result in another thread (like the private process thread) to execute python or run any code that can re-enter the public API. When this happens, a deadlock immediately occurs for things like "process launch" and "process attach".
llvm-svn: 171901
Update the debugserver "qProcessInfo" implementation to return the
cpu type, cpu subtype, OS and vendor information just like qHostInfo
does so lldb can create an ArchSpec based on the returned values.
Add a new GetProcessArchitecture to GDBRemoteCommunicationClient akin
to GetHostArchitecture. If the qProcessInfo packet is supported,
GetProcessArchitecture will return the cpu type / subtype of the
process -- e.g. a 32-bit user process running on a 64-bit x86_64 Mac
system.
Have ProcessGDBRemote set the Target's architecture based on the
GetProcessArchitecture when we've completed an attach/launch/connect.
llvm-svn: 170491
- remove unused members
- add NO_PEDANTIC to selected Makefiles
- fix return values (removed NULL as needed)
- disable warning about four-char-constants
- remove unneeded const from operator*() declaration
- add missing lambda function return types
- fix printf() with no format string
- change sizeof to use a type name instead of variable name
- fix Linux ProcessMonitor.cpp to be 32/64 bit friendly
- disable warnings emitted by swig-generated C++ code
Patch by Matt Kopec!
llvm-svn: 169645
I modified the "Args::StringtoAddress(...)" function to be able to evaluate address expressions. This is now used for any command line arguments or options that takes addresses like:
memory read <addr> [<end-addr>]
memory write <addr>
breakpoint set --address <addr>
disassemble --start-address <addr> --end-address <addr>
It calls the expression parser to evaluate the address expression and will also work around the issue where the compiler doesn't like to add offsets to function pointers (which is what happens when you try to evaluate "main + 12"). So there is a temp fix in the Args::StringtoAddress() to work around this until we can get special compiler support for debug expressions with function pointers.
llvm-svn: 169556
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
- Handle EINVAL return code from ptrace(GETSIGINFO, ...): not an error, but 'group-stop' state on Linux
- propagate SIGSTOP to inferior in above case
- this commit resolves the failure in expression_command/timeout testcase
Thanks to Sean Callanan & Matt Kopec for helping debug this problem
llvm-svn: 168523
allowed volatile registers to be returned up the stack. That leads
to unexpected/incorrect values provided to the user and we need to
avoid that.
<rdar://problem/12714247>
llvm-svn: 168123
GCD queue names of threads to
ProcessGDBRemote::GetDispatchQueueNameForThread()
May need tweaking once this version is rolled out but visual
inspection looks fine.
<rdar://problem/12333100>
llvm-svn: 167667
RegisterContextKDP_i386 was not correctly writing registers due to missing "virtual" keywords. Added the virtual keywords and made the functions pure virtual to ensure subclasses can't get away without implementing these functions.
llvm-svn: 167066
Full UnwindPlan is trying to do an impossible unwind; in that case
invalidate the Full UnwindPlan and replace it with the architecture
default unwind plan.
This is a scenario that happens occasionally with arm unwinds in
particular; the instruction analysis based full unwindplan can
mis-parse the functions and the stack walk stops prematurely. Now
we can do a simpleminded frame-chain walk to find the caller frame
and continue the unwind. It's not ideal but given the complicated
nature of analyzing the arm functions, and the lack of eh_frame
information on iOS, it is a distinct improvement and fixes some
long-standing problems with the unwinder on that platform.
This is fixing <rdar://problem/12091421>. I may re-use this
invalidate feature in the future if I can identify other cases where
the full unwindplan's unwind information is clearly incorrect.
This checkin also includes some cleanup for the volatile register
definition in the arm ABI plugin for <rdar://problem/10652166>
although work remains to be done for that bug.
llvm-svn: 166757
Added commands to the KDP plug-in that allow sending raw commands through the KDP protocol. You specify a command byte and a payload as ASCII hex bytes, and the packet is created with a valid header/sequenceID/length and sent. The command responds with a raw ASCII hex string that contains all bytes in the reply including the header.
An example of sending a read register packet for the GPR on x86_64:
(lldb) process plugin packet send --command 0x07 --payload 0100000004000000
llvm-svn: 166346
This patch fixes an issue where if lldb fails to attach to a process (ie. invalid pid) on Linux, the process monitor thread gets stuck waiting for a signal from the attach thread, which never comes due to not being signaled. It also implements StopOpThread which is used for both attach/launch cases as I'm not aware of any special handling needed for the attach case. Also, propagate 'Error' from the Detach function instead of using a bool.
llvm-svn: 166055
must push something on the stack for a function call or not. In
x86, the stack pointer is decremented when the caller's pc is saved
on the stack. In arm, the stack pointer and frame pointer don't
necessarily have to change for a function call, although most
functions need to use some stack space during their execution.
Use this information in the RegisterContextLLDB to detect invalid
unwind scenarios more accurately.
<rdar://problem/12348574>
llvm-svn: 166005
I added the ability for a process plug-in to implement custom commands. All the lldb_private::Process plug-in has to do is override:
virtual CommandObject *
GetPluginCommandObject();
This object returned should be a multi-word command that vends LLDB commands. There is a sample implementation in ProcessGDBRemote that is hollowed out. It is intended to be used for sending a custom packet, though the body of the command execute function has yet to be implemented!
llvm-svn: 165861
Then make the Thread a Broadcaster, and get it to broadcast when the selected frame is changed (but only from the Command Line) and when Thread::ReturnFromFrame
changes the stack.
Made the Driver use this notification to print the new thread status rather than doing it in the command.
Fixed a few places where people were setting their broadcaster class by hand rather than using the static broadcaster class call.
<rdar://problem/12383087>
llvm-svn: 165640
whether we try to call an external program to load symbols unconditionally,
or if we check the user's preferences before calling it.
ProcessMachCore now sets CanJIT to false - we can't execute code in a core file.
DynamicLoaderDarwinKernel::OSKextLoadedKextSummary::LoadImageUsingMemoryModule changed
to load the kernel from an on-disk file if at all possible.
Don't load the kext binaries out of memory from the remote systems - their linkedit doesn't
seem to be in a good state and we'll error out down in SymbolVendorMacOSX if we try to use
the in-memory images.
Call Symbols::DownloadObjectAndSymbolFile to get the kext/kernel binary -- the external
program may be able to give us a file path on the local filesystem instead of reading
the binary / dSYM over a network drive every time. Fall back to calling
Target::GetSharedModule() like before if DownloadObjectAndSymbolFile fails.
llvm-svn: 165471
if we have a kernel binary, set the target's architecture to match.
Include the target's architecture in the ModuleSpec when we're searching for the
kext binaries on the local system -- otherwise we won't get a specific slice of
a fat file picked out for us and we won't use the returned Module correctly.
Remove the redundant attempt to find a file on the local filesystem from this method.
In ProcessGDBRemote::CheckForKernel(), if we have a kernel binary in memory, mark
the canJIT as false. There is no jitting code in kernel debug sessions.
llvm-svn: 165357
remove the duplicates of this code in ProcessGDBRemote and ProcessKDP.
These two Process plugins will hardcode their DynamicLoader name to be
the DynamicLoaderDarwinKernel so the correct DynamicLoader is picked,
and return the kernel load address as the ImageInfosAddress.
<rdar://problem/12417038>
llvm-svn: 165080
When attaching to a remote system that does not look like a typical vendor system, and no
executable binary was specified to lldb, check a couple of fixed locations where kernels
running in ASLR mode (slid in memory to a random address) store their load addr when booted
in debug mode, and relocate the symbols or load the kernel wholesale from the host computer
if we can find it.
<rdar://problem/7714201>
llvm-svn: 164888
loaded at a random offset).
To get the kernel's UUID and load address I need to send a kdp
packet so I had to implement the kernel relocation (and attempt to
find the kernel if none was provided to lldb already) in ProcessKDP
-- but this code really properly belongs in DynamicLoaderDarwinKernel.
I also had to add an optional Stream to ConnectRemote so
ProcessKDP::DoConnectRemote can print feedback about the remote kernel's
UUID, load address, and notify the user if we auto-loaded the kernel via
the UUID.
<rdar://problem/7714201>
llvm-svn: 164881
KDP -- now with rudimentary process control (continue only) and read + write registers (which means we can see stack frames) for x86_64, i386 and ARM.
llvm-svn: 164352
it is unconditionally present now.
ObjectContainerBSDArchive::CreateInstance %z8.8x is not a valid printf arg specifier, %8.8zx would work
for size_t arg but this arg is addr_t. use %8.8llx and cast up to uint64_t.
ObjectFile::FindPlugin ditto.
DynamicRegisterInfo::SetRegisterInfo ifdef this function out if LLDB_DISABLE_PYTHON.
llvm-svn: 163599
The attached patch fixes a problem with performing an attach from the SBTarget API on Linux (and other systems that use ProcessPOSIX).
When Process::Attach was called from SBTarget, it resulted in a call to a form of the DoAttachWithID function that wasn't implemented in ProcessPOSIX, and so it fell back to the default implementation (which just returns an error). It didn't seem necessary to use the attach_info parameter for this case, so I just implemented it as a call to the simpler version of the function.
In debugging this problem, I also found that SBTarget wasn't checking the return value from the Attach call, causing it to hang when the attach fails.
llvm-svn: 163399
The attached patch adds support for debugging 32-bit processes when running a 64-bit lldb on an x86_64 Linux system.
Making this work required two basic changes:
1) Getting lldb to report that it could debug 32-bit processes
2) Changing an assumption about how ptrace works when debugging cross-platform
For the first change, I took a conservative approach and only enabled this for x86_64 Linux platforms. It may be that the change I made in Host.cpp could be extended to other 64-bit Linux platforms, but I'm not familiar enough with the other platforms to know for sure.
For the second change, the Linux ProcessMonitor class was assuming that ptrace(PTRACE_[PEEK|POKE]DATA...) would read/write a "word" based on the child process word size. However, the ptrace documentation says that the "word" size read or written is "determined by the OS variant." I verified experimentally that when ptracing a 32-bit child from a 64-bit parent a 64-bit word is read or written.
llvm-svn: 163398
on, basic inlined stepping works, including step-over of inlined functions. But for some as yet mysterious reason i386 debugging gets an
assert and dies immediately. So for now its off.
llvm-svn: 163044
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
Added code the initialize the register context in the OperatingSystemPython plug-in with the new PythonData classes, and added a test OperatingSystemPython module in lldb/examples/python/operating_system.py that we can use for testing.
llvm-svn: 162530
Previously we put a WatchpointSentry object within StopInfo.cpp to disable-and-then-enable the watchpoint itself
while we are performing the actions associated with the triggered watchpoint, which can cause the user-initiated
watchpoint disabling action to be negated.
Add a test case to verify that a watchpoint can be disabled during the callbacks.
llvm-svn: 162483
when you want to find the caller's saved pc, you look up the return address
register and use that. On arm, for instance, this would be the contents of
the link register (lr).
If the eh_frame CIE defines an RA, record that fact in the UnwindPlan.
When we're finding a saved register, if it's the pc, lok for the location
of the return address register instead.
<rdar://problem/12062310>
llvm-svn: 162167
Convert from calling Halt in the lldb Driver.cpp's input reader's sigint handler to sending this AsyncInterrupt so it can be handled in the
event loop.
If you are attaching and get an async interrupt, abort the attach attempt.
Also remember to destroy the process if get interrupted while attaching.
Getting this to work also required handing the eBroadcastBitInterrupt in a few more places in Process WaitForEvent & friends.
<rdar://problem/10792425>
llvm-svn: 160903
calling functions. This is necessary on Mac OS X, since bad things can happen if you set
the registers of a thread that's sitting in a kernel trap.
<rdar://problem/11145013>
llvm-svn: 160756
a shared pointer to ease some memory management issues with a patch
I'm working on.
The main complication with using SPs for these objects is that most
methods that build up an UnwindPlan will construct a Row to a given
instruction point in a function, then add additional regsaves in
the next instruction point to that row and push it again. A little
care is needed to not mutate the previous instruction point's Row
once these are switched to being held behing shared pointers.
llvm-svn: 160214
Fixed an issue where GDB servers that don't support the thread suffix could get registers states incorrectly due to an incorrect assumption that the current register thread (set using the "Hg%x" packet) will always be cached between runs. Now we clear the cached register thred when the process is resumed.
llvm-svn: 159603
than being given the pthread_mutex_t from the Mutex and locks that. That allows us to
track ownership of the Mutex better.
Used this to switch the LLDB_CONFIGURATION_DEBUG enabled assert when we can't get the
gdb-remote sequence mutex to assert when the thread that had the mutex releases it. This
is generally more useful information than saying just who failed to get it (since the
code that had it locked often had released it by the time the assert fired.)
llvm-svn: 158240
m_interrupt_sent into account. Also don't reset m_interrupt_sent in SendInterrupt but do so in SendPacketAndWaitForResponse
when we know we've handled the interrupt.
Fix a code path through ProcessGDBRemote::DoDestroy where we were tearing down the debug session but
not setting the exit status.
llvm-svn: 158043
Fixed a case where multiple threads can be asking to send a packet to the GDB server and one of three things will happen:
1 - everything works
2 - one thread will fail to send the packet due to not being able to get the sequence mutex
3 - one thread will try and interrupt the other packet sending and fail and not send the packet
Now the flow is a bit different. Prior to this fix we did:
if (try_get_sequence_mutex()) {
send_packet()
return success;
} else {
if (async_ok) {
interrupt()
send_packet()
resume()
return success;
}
}
return fail
The issue is that the call to "try_get_sequence_mutex()" could fail if another thread was sending a packet and could cause us to just not send the packet and an error would be returned.
What we really want is to try and get the sequence mutex, and if this succeeds, send the packet. Else check if we are running and if we are, do what we used to do. The big difference is when we aren't running, we wait for the sequence mutex so we don't drop packets. Pseudo code is:
if (try_get_sequence_mutex()) {
// Safe to send the packet right away
send_packet()
return success;
} else {
if (running) {
// We are running, interrupt and send async packet if ok to do so,
// else it is ok to fail
if (async_ok) {
interrupt()
send_packet()
resume()
return success;
}
}
else {
// Not running, wait for the sequence mutex so we don't drop packets
get_sequence_mutex()
send_packet()
return success;
}
}
return fail
llvm-svn: 157751
Sending async packets can deadlock a program on darwin. We currently allow breakpoint packets and memory read/write packets (for software breakpoints) to be sent while a program is running. In the GDB remote plug-in, we will interrupt the run, send the async packet and resume (currently with the continue packet that caused the program to resume). If the GDB server supports the "vCont" packet, we might have initially continued with each thread stating it should continue. If new threads show up while we are stopped, which happend when running GCD, we can end up with new threads that we aren't mentioning in the continue list. So we start with a thread list of 1,2,3 and continue:
continue thread 1, continue thread 2, continue thread 3
Now we interrupt and set a breakpoint and we actually have threads 1,2,3,4 now when we are about to resume, yet we send:
continue thread 1, continue thread 2, continue thread 3
Any thread that isn't mentioned is currently going to stay suspended. This causes the deadlock.
llvm-svn: 157439
Add default Process::GetWatchpointSupportInfo() impl which returns an error of "not supported".
Add "qWatchpointSupportInfo" packet to the gdb communication layer to support this, and modify TestWatchpointCommands.py to test it.
llvm-svn: 157345
the value_regs field, which is useful for future expansion purposes. As of now, we have:
calculated_offset_of_eax = offset_of_rax + (offset_of_eax_from_the_descriptor which is 0)
llvm-svn: 157275
Add convenience registers eax, ebx, ecx, edx, edi, esi, ebp, esp to the 'register read' command for x86_64.
Add a GDBRemoteRegisterContext::Addx86_64ConvenienceRegisters() method called from ProcessGDBRemote::BuildDynamicRegisterInfo().
Servicing of eax, for example, is accomplished by delegating to rax with an adjusted offset into the register context.
llvm-svn: 157230
that dynamically discovers remote register context information.
o GDBRemoteRegisterContext.h:
Change the prototype of HardcodeARMRegisters() to take a boolean flag, which now becomes
void
HardcodeARMRegisters(bool from_scratch);
o GDBRemoteRegisterContext.cpp:
HardcodeARMRegisters() now checks the from_scratch flag and decides whether to add composite registers to the already
existing primordial registers based on a table called g_composites which describes the composite registers.
o ProcessGDBRemote.cpp:
Modify the logic of ProcessGDBRemote::BuildDynamicRegisterInfo() to call m_register_info.HardcodeARMRegisters()
with the newly introduced 'bool from_scrach' flag.
rdar://problem/10652076
llvm-svn: 156773
Switch over to the "*-apple-macosx" for desktop and "*-apple-ios" for iOS triples.
Also make the selection process for auto selecting platforms based off of an arch much better.
llvm-svn: 156354
No one was using it and Locker(pthread_mutex_t *) immediately asserts for
pthread_mutex_t's that don't come from a Mutex anyway. Rather than try to make
that work, we should maintain the Mutex abstraction and not pass around the
platform implementation...
Make Mutex::Locker::Lock take a Mutex & or a Mutex *, and remove the constructor
taking a pthread_mutex_t *. You no longer need to call Mutex::GetMutex to pass
your mutex to a Locker (you can't in fact, since I made it private.)
llvm-svn: 156221
us of its architecture, use that to set the Target's arch if it
doesn't already have one set.
In Process::CompleteAttach(), if the Target has a valid arch make
sure that the Platform we pick up is compatible with that arch; if
not, find a Platform that is compatible. Don't let the the default
platform override the Target's arch.
<rdar://problem/11185420>
llvm-svn: 156116
Hello everyone,
please find the attached patch for TOT and lldb-platform-work branch, which provides the following changes:
- fixed a crash in the ProcessPOSIX constructor when an executable module object is not yet created.
- added support for the multi instanciated FreeBSD platform objects (the local host and remote as example).
- enabled the remote gdb plugin on FreeBSD.
llvm-svn: 154724
Enable logging the packet history when registers fail to read due to not getting the sequence mutex if "--verbose" is enabled on the log channel for the "gdb-remote" log category.
This will help us track down some issues.
llvm-svn: 154704
The less locks there are, the better. I removed the thread ID mutex and now just shared the m_thread_list's mutex to make sure we don't deadlock due to lock inversion.
llvm-svn: 154652
for packet confirmation.
Also added a bit more logging.
Also, unlock the writer end of the run lock in Process.cpp on our way out of the private state
thread so that the Process can shut down cleanly.
<rdar://problem/11228538>
llvm-svn: 154601
Cleaned up the Mutex::Locker and the ReadWriteLock classes a bit.
Also cleaned up the GDBRemoteCommunication class to not have so many packet functions. Used the "NoLock" versions of send/receive packet functions when possible for a bit of performance.
llvm-svn: 154458
QListThreadsInStopReply
This GDB remote query command can enable added a "threads" key/value pair to all stop reply packets so that we always get a list of all threads in each stop reply packet. It increases performance if enabled (the reply to the "QListThreadsInStopReply" is "OK") by saving us from sending to command/reply pairs (the "qfThreadInfo" and "qsThreadInfo" packets), and also helps us keep the current process state up to date.
llvm-svn: 154380
The next step is to have our stop reply packets send the thread list in the actual stop reply packet to avoid a 2 packet overhead of sending the qfThreadInfo + response and qfThreadInfo + response.
llvm-svn: 154376
The current ProcessGDBRemote function that updates the threads could end up with an empty list if any other thread had the sequence mutex. We now don't clear the thread list when we can't access it, and we also have changed how lldb_private::Process handles the return code from the:
virtual bool
Process::UpdateThreadList (lldb_private::ThreadList &old_thread_list,
lldb_private::ThreadList &new_thread_list) = 0;
A bool is now returned to indicate if the list was actually updated or not and the lldb_private::Process class will only update the stop ID of the validity of the thread list if "true" is returned.
The ProcessGDBRemote also got an extra assertion that will hopefully assert when running debug builds so we can find the source of this issue.
llvm-svn: 154365
spin up a temporary "private state thread" that will respond to events from the lower level process plugins. This check-in should work to do
that, but it is still buggy. However, if you don't call functions on the private state thread, these changes make no difference.
This patch also moves the code in the AppleObjCRuntime step-through-trampoline handler that might call functions (in the case where the debug
server doesn't support the memory allocate/deallocate packet) out to a safe place to do that call.
llvm-svn: 154230
<rdar://problem/11051056>
Found a race condition when sending async packets in the ProcessGDBRemote.
A little background: GDB remote clients can only send one packet at a time. You must send a packet and wait for a response. So when we continue, we obviously can't hold up the calling thread waiting for the process to stop again, so we have an async thread in the ProcessGDBRemote whose only job is to run packets that control the inferior process. When you send a continue packet, the only packet you can send is an interrupt packet (which consists of sending a CTRL+C (or a '\x03' byte)). This then stops the inferior and we can send the async packet, and then resume the target. There was a race condition that often happened during stepping where we are doing a source level single step which consists of many instruction steps and a few runs here and there when we step into a function. So the flow looks like:
inst single step
inst single step
inst single step
inst single step
inst single step
step BP and run
inst single step
inst single step
inst single step
Now if we got an async packet while the program is running we get something like:
send --> continue
send --> interrupt
recv <-- interrupt stop reply packet
send --> async packet
recv <-- async response
send --> continue again and wait for actual stop
Problems arise when this was happening when single stepping a thread where we would get:
send --> step thread 123
send --> interrupt
send --> stop reply for thread 123 (from the step)
Now we _might_ have an extra stop reply packet from the "interrupt" which we weren't checking for and we could end up with:
send --> async packet (like memory read!)
recv <-- async response (which is the interrupt stop reply packet)
Now we have the read memroy reply sitting in our buffer and waiting to be used as the reply for the next packet...
To further complicate things, the single step should have exited the async thread since the run control is finished, but now it will continue if it was interrupted.
The fixes I checked in to two major things:
- watch for the extra stop reply if we need to
- make sure we exit from the async thread run loop when the previous run control (like the instruction level single step) is finished.
Needless to say this makes very fast stepping in Xcode much more reliable.
llvm-svn: 153629
This fix really needed to happen as a previous fix I had submitted for
calculating symbol sizes made many symbols appear to have zero size since
the function that was calculating the symbol size was calling another function
that would cause the calculation to happen again. This resulted in some symbols
having zero size when they shouldn't. This could then cause infinite stack
traces and many other side affects.
llvm-svn: 152244
Fixed STDERR to not be opened as readable. Also cleaned up some of the code that implemented the file actions as some of the code was using the wrong variables, they now use the right ones (in for stdin, out for stdout, err for stderr).
llvm-svn: 152102
which require a valid CFA address to create a stack frame. On connecting
to just-starting-up hardware we may have a stack pointer/frame pointer of 0
but we should still create a stack frame so other code in lldb can retrieve
register values via a stackframe.
llvm-svn: 151796
Incremental check in to calculate the offsets of registers correctly. Registers can be primordial or composite,
for example, r0-r12 are primordial, s0-s31 are primordial, while q0 is composite consisting of (s0, s1, s2, s3).
Modify q0-q8 to be composed of the primordial s0-s31 registers.
llvm-svn: 151757
an unwind because RegisterContextLLDB::InitializeZerothFrame() would
create a minimal stack frame to fetch the pc value of the current
instruction. This proved fragile when another section of code was
trying to create the first stack frame and UnwindLLDB called
RegisterContextLLDB which tried to create its minimal stack frame.
Instead, get the live RegisterContext, retrieve the pc value from
the registers, and create an Address object from that.
llvm-svn: 151714
Initial step -- infrastructure change -- to fix the bug. Change the RegisterInfo data structure
to contain two additional fields (uint32_t *value_rges and uint32_t *invalidate_regs) to facilitate
architectures which have register mapping.
Update all existing RegsiterInfo arrays to have two extra NULL's (the additional fields) in each row,
GDBRemoteRegisterContext.cpp is modified to add d0-d15 and q0-q15 register info entries which take
advantage of the value_regs field to specify the containment relationship:
d0 -> (s0, s1)
...
d15 -> (s30, s31)
q0 -> (d0, d1)
...
q15 -> (d30, d31)
llvm-svn: 151686
more of the local path, platform path, associated symbol file, UUID, arch,
object name and object offset. This allows many of the calls that were
GetSharedModule to reduce the number of arguments that were used in a call
to these functions. It also allows a module to be created with a ModuleSpec
which allows many things to be specified prior to any accessors being called
on the Module class itself.
I was running into problems when adding support for "target symbol add"
where you can specify a stand alone debug info file after debugging has started
where I needed to specify the associated symbol file path and if I waited until
after construction, the wrong symbol file had already been located. By using
the ModuleSpec it allows us to construct a module with as little or as much
information as needed and not have to change the parameter list.
llvm-svn: 151476
I started work on being able to add symbol files after a debug session
had started with a new "target symfile add" command and quickly ran into
problems with stale Address objects in breakpoint locations that had
lldb_private::Section pointers into modules that had been removed or
replaced. This also let to grabbing stale modules from those sections.
So I needed to thread harded the Address, Section and related objects.
To do this I modified the ModuleChild class to now require a ModuleSP
on initialization so that a weak reference can created. I also changed
all places that were handing out "Section *" to have them hand out SectionSP.
All ObjectFile, SymbolFile and SymbolVendors were inheriting from ModuleChild
so all of the find plug-in, static creation function and constructors now
require ModuleSP references instead of Module *.
Address objects now have weak references to their sections which can
safely go stale when a module gets destructed.
This checkin doesn't complete the "target symfile add" command, but it
does get us a lot clioser to being able to do such things without a high
risk of crashing or memory corruption.
llvm-svn: 151336
objects for the backlink to the lldb_private::Process. The issues we were
running into before was someone was holding onto a shared pointer to a
lldb_private::Thread for too long, and the lldb_private::Process parent object
would get destroyed and the lldb_private::Thread had a "Process &m_process"
member which would just treat whatever memory that used to be a Process as a
valid Process. This was mostly happening for lldb_private::StackFrame objects
that had a member like "Thread &m_thread". So this completes the internal
strong/weak changes.
Documented the ExecutionContext and ExecutionContextRef classes so that our
LLDB developers can understand when and where to use ExecutionContext and
ExecutionContextRef objects.
llvm-svn: 151009
Tracking modules down when you have a UUID and a path has been improved.
DynamicLoaderDarwinKernel no longer parses mach-o load commands and it
now uses the memory based modules now that we can load modules from memory.
Added a target setting named "target.exec-search-paths" which can be used
to supply a list of directories to use when trying to look for executables.
This allows one or more directories to be used when searching for modules
that may not exist in the SDK/PDK. The target automatically adds the directory
for the main executable to this list so this should help us in tracking down
shared libraries and other binaries.
llvm-svn: 150426
indicate whether inline functions are desired.
This allows the expression parser, for instance,
to filter out inlined functions when looking for
functions it can call.
llvm-svn: 150279
user space programs. The core file support is implemented by making a process
plug-in that will dress up the threads and stack frames by using the core file
memory.
Added many default implementations for the lldb_private::Process functions so
that plug-ins like the ProcessMachCore don't need to override many many
functions only to have to return an error.
Added new virtual functions to the ObjectFile class for extracting the frozen
thread states that might be stored in object files. The default implementations
return no thread information, but any platforms that support core files that
contain frozen thread states (like mach-o) can make a module using the core
file and then extract the information. The object files can enumerate the
threads and also provide the register state for each thread. Since each object
file knows how the thread registers are stored, they are responsible for
creating a suitable register context that can be used by the core file threads.
Changed the process CreateInstace callbacks to return a shared pointer and
to also take an "const FileSpec *core_file" parameter to allow for core file
support. This will also allow for lldb_private::Process subclasses to be made
that could load crash logs. This should be possible on darwin where the crash
logs contain all of the stack frames for all of the threads, yet the crash
logs only contain the registers for the crashed thrad. It should also allow
some variables to be viewed for the thread that crashed.
llvm-svn: 150154
instances to not pthread_cancel the read threads and wreak havoc on the mutex
in our ConnectionFileDescriptor class.
Also cleaned up some shutdown delays.
llvm-svn: 149355
due to RTTI worries since llvm and clang don't use RTTI, but I was able to
switch back with no issues as far as I can tell. Once the RTTI issue wasn't
an issue, we were looking for a way to properly track weak pointers to objects
to solve some of the threading issues we have been running into which naturally
led us back to std::tr1::weak_ptr. We also wanted the ability to make a shared
pointer from just a pointer, which is also easily solved using the
std::tr1::enable_shared_from_this class.
The main reason for this move back is so we can start properly having weak
references to objects. Currently a lldb_private::Thread class has a refrence
to its parent lldb_private::Process. This doesn't work well when we now hand
out a SBThread object that contains a shared pointer to a lldb_private::Thread
as this SBThread can be held onto by external clients and if they end up
using one of these objects we can easily crash.
So the next task is to start adopting std::tr1::weak_ptr where ever it makes
sense which we can do with lldb_private::Debugger, lldb_private::Target,
lldb_private::Process, lldb_private::Thread, lldb_private::StackFrame, and
many more objects now that they are no longer using intrusive ref counted
pointer objects (you can't do std::tr1::weak_ptr functionality with intrusive
pointers).
llvm-svn: 149207
Fixed an ARM backtracing issue where if the previous frame was a thumb
function and it was a tail call so that the current frame returned to
an address that would fall into the next function, we would use the
next function as the basis for how we unwound the previous frame's
registers and of course get things wrong. We now fix the PC code
address using the current ABI plug-in, and the ARM ABI plug-in has
been modified to correctly fix the code address. So when we do the
symbol context lookup, instead of taking an address like 0x1001 and
decrementing 1, and looking up the symbol context for a frame, we
now correctly fix 0x1001 to 0x1000, then decrement that by 1 to
get the correct symbol context.
I added a bunch more logging to "log enable lldb uwnind" to help
us in the future. We now log the PC, FP and SP (if they are available),
and we also dump the "active_row" that we find for unwinding a frame.
llvm-svn: 147747
This patch combines common code from Linux and FreeBSD into
a new POSIX platform. It also contains fixes for 64bit FreeBSD.
The patch is based on changes by Mark Peek <mp@FreeBSD.org> and
"K. Macy" <kmacy@freebsd.org> in their github repo located at
https://github.com/fbsd/lldb.
llvm-svn: 147613
a new POSIX platform. It also contains fixes for 64bit FreeBSD.
The patch is based on changes by Mark Peek <mp@FreeBSD.org> and
"K. Macy" <kmacy@freebsd.org> in their github repo located at
https://github.com/fbsd/lldb.
llvm-svn: 147609
Switch from GetReturnValue, which was hardly ever used, to GetReturnValueObject
which is much more convenient.
Return the "return value object" as a persistent variable if requested.
llvm-svn: 147157
1 -- an address pointing off into non-executable memory -- don't
abort the unwind. We'll use the ABI's default UnwindPlan to try
to get out of frame 1 and on many platforms with a standard frame
chain stack layout we can get back on track and get a valid frame
2. This preserves the lldb behavior to-date; the change last week
to require the memory region to be executable broke it.
I'd like to mark this frame specially when displayed to the user;
I tried to override the places where the frame's pc value is returned
to change it to a sentinel value (e.g. LLDB_INVALID_ADDRESS) but
couldn't get that to work cleanly so I backed that part out for
now. When this happens we'll often miss one of the user's actual
frames, the one that's of most interest to the user, so I'd like
to make this visually distinctive.
Note that a frame in non-executable memory region is only allowed
for frame 1. After that we should be solid on the unwind and any
pc address in non-executable memory indicates a failure and we
should stop unwinding.
llvm-svn: 146723
dispatch functions that are implemented in hand-written assembly.
There is also hand-written eh_frame instructions for unwinding
from these functions.
Normally we don't use eh_frame instructions for the currently
executing function, prefering the assembly instruction profiling
method. But in these hand-written dispatch functions, the
profiling is doomed and we should use the eh_frame instructions.
Unfortunately there's no easy way to flag/extend the eh_frame/debug_frame
sections to annotate if the unwind instructions are accurate at
all addresses ("asynchronous") or if they are only accurate at locations
that can throw an exception ("synchronous" and the normal case for
gcc/clang generated eh_frame/debug_frame CFI).
<rdar://problem/10508134>
llvm-svn: 146551
Check that the pc value for frames up the stack is in a
mapped+executable region of memory.
Check that the stack pointer for frames up the stack is
in a mapped+readable region of memory.
If the unwinder ever makes a mistake walking the stack,
these checks will help to keep it from going too far into
the weeds.
These aren't fixing any bugs that I know of, but they
add extra robustness to a complicated task.
llvm-svn: 146478
if this is a mapped/executable region of memory. If it isn't, we've jumped
through a bad pointer and we know how to unwind the stack correctly based
on the ABI.
Previously I had 0x0 special cased but if you jumped to 0x2 on x86_64 one
frame would be skipped because the unwinder would try using the x86_64
ArchDefaultUnwindPlan which relied on the rbp.
Fixes <rdar://problem/10508291>
llvm-svn: 146477
will allow us to represent a process/thread ID using a pointer for the OS
plug-ins where they might want to represent the process or thread ID using
the address of the process or thread structure.
llvm-svn: 145644
Chaoren Lin