r259714 introduces the transport method into the
URL passed to the gdb-remote stub. On debugserver,
this is not supported and prevented debugserver from
being launched by lldb-server in platform mode.
This change skips the transport method addition from
r259714 when on Apple hosts.
llvm-svn: 270961
Patch by Nitesh Jain.
Summary: Currently floating point regsiters has eEncodingUint encoding. Hence register write '1.25' will failed. This patch add eEncodingIEEE754 encoding for floating point registers( - ). This patch will fix test_fp_register_write in TestRegisters.py
Reviewers: clayborg, sagar
Subscribers: mohit.bhakkad, jaydeep, bhushan, sdardis, lldb-commits
Differential: D18853
llvm-svn: 270208
values for the pc or return address register.
On ios with arm64 and a binary that has multiple functions without
individual symbol boundaries, we end up with an assembly profile
unwind plan that says lr=<same> - that is, the link register contents
are unmodified from the caller's value. This gets the unwinder in
a loop.
When we're off the 0th frame, we never want to look to a caller for
a pc or return-address register value.
Add checks to ReadGPRValue and ReadRegister to prevent both the pc
and ra register values from recursing.
If this causes problems with backtraces on android, let me know or
back it out and I'll look into it -- but I think these are
straightforward and don't expect problems.
<rdar://problem/24610365>
llvm-svn: 270162
The error was not getting propagated to the caller, so the higher layers thought the breakpoint
was successfully set & resolved.
I added a testcase, but it assumes 0x0 is not a valid place to set a breakpoint. On most systems
that is true, but if it isn't true of your system, either find another good place and add it to the
test, or x-fail the test.
<rdar://problem/26345962>
llvm-svn: 270014
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
NPL now assumes it is running from a single thread now, so its thread-safety is untested
anyway (and if that assumption is broken, we'll have bigger problems (due to ptrace restrictions)
than a couple of missing mutexes).
llvm-svn: 269640
Summary:
MonitorDebugServerProcess went to a lot of effort to make sure its asynchronous invocation does
not cause any mischief, but it was still not race-free. Specifically, in a quick stop-restart
sequence (like the one in TestAddressBreakpoints) the copying of the process shared pointer via
target_sp->GetProcessSP() was racing with the resetting of the pointer in DeleteCurrentProcess,
as they were both accessing the same shared_ptr object.
To avoid this, I simply pass in a weak_ptr to the process when the callback is created. Locking
this pointer is race-free as they are two separate object even though they point to the same
process instance. This also removes the need for the complicated tap-dance around retrieving the
process pointer.
Reviewers: clayborg
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D20107
llvm-svn: 269281
Summary:
This replaces the C-style "void *" baton of the child process monitoring functions with a more
C++-like API taking a std::function. The motivation for this was that it was very difficult to
handle the ownership of the object passed into the callback function -- each caller ended up
implementing his own way of doing it, some doing it better than others. With the new API, one can
just pass a smart pointer into the callback and all of the lifetime management will be handled
automatically.
This has enabled me to simplify the rather complicated handshake in Host::RunShellCommand. I have
left handling of MonitorDebugServerProcess (my original motivation for this change) to a separate
commit to reduce the scope of this change.
Reviewers: clayborg, zturner, emaste, krytarowski
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D20106
llvm-svn: 269205
Summary:
If the remote uses svr4 packets to communicate library info,
the LoadUnload tests will fail, as lldb only used the basename
for modules, causing problems when two modules have the same basename.
Using absolute path as sent by the remote will ensure that lldb
locates the module from the correct directory when there are overlapping
basenames. When debugging a remote process, LoadModuleAtAddress will still
fall back to using basename and module_search_paths, so we don't
need to worry about using absolute paths in this case.
Reviewers: ADodds, jasonmolenda, clayborg, ovyalov
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D19557
llvm-svn: 267741
Summary:
If the remote uses include features when communicating
xml register info back to lldb, the existing code would reset the
lldb register index at the beginning of each include node.
This would lead to multiple registers having the same lldb register index.
Since the lldb register numbers should be contiguous and unique,
maintain them accross the parsing of all of the xml feature nodes.
Reviewers: jingham, jasonmolenda, clayborg
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D19303
llvm-svn: 267468
Summary:
When we receive an svr4 packet from the remote, we check for new modules
and add them to the list of images in the target. However, we did not
do the same for modules which have been removed.
This was causing TestLoadUnload to fail when using ds2, which uses
svr4 packets to communicate all library info on Linux. This patch fixes
the failing test.
Reviewers: zturner, tfiala, ADodds
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D19230
llvm-svn: 267467
Summary:
eRegisterKindProcessPlugin is used to store the register
indices used by the remote, and eRegisterKindLLDB is used
to store the internal lldb register indices. However, we're currently
using the lldb indices instead of the process plugin indices
when sending p/P packets. This will break if the remote uses
non-contiguous register indices.
Reviewers: jasonmolenda, clayborg
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D19305
llvm-svn: 267466
RegisterContextLLDB::InitializeNonZerothFrame already has code to attempt
to detect and handle the case where the PC points beyond the end of a
function, but there are certain cases where this doesn't work correctly.
In fact, there are *two* different places where this detection is attempted,
and the failure is in fact a result of an unfortunate interaction between
those two separate attempts.
First, the ResolveSymbolContextForAddress routine is called with the
resolve_tail_call_address flag set to true. This causes the routine
to internally accept a PC pointing beyond the end of a function, and
still resolving the PC to that function symbol.
Second, the InitializeNonZerothFrame routine itself maintains a
"decr_pc_and_recompute_addr_range" flag and, if that turns out to
be true, itself decrements the PC by one and searches again for
a symbol at that new PC value.
Both approaches correctly identify the symbol associated with the PC.
However, the problem is now that later on, we also need to find the
DWARF CFI record associated with the PC. This is done in the
RegisterContextLLDB::GetFullUnwindPlanForFrame routine, and uses
the "m_current_offset_backed_up_one" member variable.
However, that variable only actually contains the PC "backed up by
one" if the *second* approach above was taken. If the function was
already identified via the first approach above, that member variable
is *not* backed up by one but simply points to the original PC.
This in turn causes GetEHFrameUnwindPlan to not correctly identify
the DWARF CFI record associated with the PC.
Now, in many cases, if the first method had to back up the PC by one,
we *still* use the second method too, because of this piece of code:
// Or if we're in the middle of the stack (and not "above" an asynchronous event like sigtramp),
// and our "current" pc is the start of a function...
if (m_sym_ctx_valid
&& GetNextFrame()->m_frame_type != eTrapHandlerFrame
&& GetNextFrame()->m_frame_type != eDebuggerFrame
&& addr_range.GetBaseAddress().IsValid()
&& addr_range.GetBaseAddress().GetSection() == m_current_pc.GetSection()
&& addr_range.GetBaseAddress().GetOffset() == m_current_pc.GetOffset())
{
decr_pc_and_recompute_addr_range = true;
}
In many cases, when the PC is one beyond the end of the current function,
it will indeed then be exactly at the start of the next function. But this
is not always the case, e.g. if there happens to be alignment padding
between the end of one function and the start of the next.
In those cases, we may sucessfully look up the function symbol via
ResolveSymbolContextForAddress, but *not* set decr_pc_and_recompute_addr_range,
and therefore fail to find the correct DWARF CFI record.
A very simple fix for this problem is to just never use the first method.
Call ResolveSymbolContextForAddress with resolve_tail_call_address set
to false, which will cause it to fail if the PC is beyond the end of
the current function; or else, identify the next function if the PC
is also at the start of the next function. In either case, we will
then set the decr_pc_and_recompute_addr_range variable and back up the
PC anyway, but this time also find the correct DWARF CFI.
A related problem is that the ResolveSymbolContextForAddress sometimes
returns a "symbol" with empty name. This turns out to be an ELF section
symbol. Now, usually those get type eSymbolTypeInvalid. However, there
is code in ObjectFileELF::ParseSymbols that tries to change the type of
invalid symbols to eSymbolTypeCode or eSymbolTypeData if the symbol
lies within the code or data section.
Unfortunately, this check also hits the symbol for the code section
itself, which is then marked as eSymbolTypeCode. While the size of
the section symbol is 0 according to the ELF file, LLDB considers
this size invalid and attempts to figure out the "correct" size.
Depending on how this goes, we may end up with a symbol that overlays
part of the code section, even outside areas covered by real function
symbols.
Therefore, if we call ResolveSymbolContextForAddress with PC pointing
beyond the end of a function, we may get this bogus section symbol.
This again means InitializeNonZerothFrame thinks we have a valid PC,
but then we don't find any unwind info for it.
The fix for this problem is me to simply always leave ELF section
symbols as type eSymbolTypeInvalid.
Differential Revision: http://reviews.llvm.org/D18975
llvm-svn: 267363
This patch adds support for Linux on SystemZ:
- A new ArchSpec value of eCore_s390x_generic
- A new directory Plugins/ABI/SysV-s390x providing an ABI implementation
- Register context support
- Native Linux support including watchpoint support
- ELF core file support
- Misc. support throughout the code base (e.g. breakpoint opcodes)
- Test case updates to support the platform
This should provide complete support for debugging the SystemZ platform.
Not yet supported are optional features like transaction support (zEC12)
or SIMD vector support (z13).
There is no instruction emulation, since our ABI requires that all code
provide correct DWARF CFI at all PC locations in .eh_frame to support
unwinding (i.e. -fasynchronous-unwind-tables is on by default).
The implementation follows existing platforms in a mostly straightforward
manner. A couple of things that are different:
- We do not use PTRACE_PEEKUSER / PTRACE_POKEUSER to access single registers,
since some registers (access register) reside at offsets in the user area
that are multiples of 4, but the PTRACE_PEEKUSER interface only allows
accessing aligned 8-byte blocks in the user area. Instead, we use a s390
specific ptrace interface PTRACE_PEEKUSR_AREA / PTRACE_POKEUSR_AREA that
allows accessing a whole block of the user area in one go, so in effect
allowing to treat parts of the user area as register sets.
- SystemZ hardware does not provide any means to implement read watchpoints,
only write watchpoints. In fact, we can only support a *single* write
watchpoint (but this can span a range of arbitrary size). In LLDB this
means we support only a single watchpoint. I've set all test cases that
require read watchpoints (or multiple watchpoints) to expected failure
on the platform. [ Note that there were two test cases that install
a read/write watchpoint even though they nowhere rely on the "read"
property. I've changed those to simply use plain write watchpoints. ]
Differential Revision: http://reviews.llvm.org/D18978
llvm-svn: 266308
If the UnwindPlan did not identify how to unwind the stack pointer
register, LLDB currently assumes it can determine to caller's SP
from the current frame's CFA. This is true on most platforms
where CFA is by definition equal to the incoming SP at function
entry.
However, on the s390x target, we instead define the CFA to equal
the incoming SP plus an offset of 160 bytes. This is because
our ABI defines that the caller has to provide a register save
area of size 160 bytes. This area is allocated by the caller,
but is considered part of the callee's stack frame, and therefore
the CFA is defined as pointing to the top of this area.
In order to make this work on s390x, this patch introduces a new
ABI callback GetFallbackRegisterLocation that provides platform-
specific fallback register locations for unwinding. The existing
code to handle SP unwinding as well as volatile registers is moved
into the default implementation of that ABI callback, to allow
targets where that implementation is incorrect to override it.
This patch in itself is a no-op for all existing platforms.
But it is a pre-requisite for adding s390x support.
Differential Revision: http://reviews.llvm.org/D18977
llvm-svn: 266307
The structure definitions are not provided, but we perform a sizeof operation of
them which causes a build failure. Include `asm/ptrace.h` to get the structure
definitions.
llvm-svn: 266042
os to "ios" or "macosx" if it is unspecified. For environments
where there genuinely is no os, we don't want to errantly
convert that to ios/macosx, e.g. bare board debugging.
Change PlatformRemoteiOS, PlatformRemoteAppleWatch, and
PlatformRemoteAppleTV to not create themselves if we have
an unspecified OS. Same problem - these are not appropriate
platforms for bare board debugging environments.
Have Process::Attach's logging take place if either
process or target logging is enabled.
<rdar://problem/25592378>
llvm-svn: 265732
In turns out this does make a functional change, in case when the inferior hits an int3 that was
not placed by the debugger. Backing out for now.
llvm-svn: 265647
Summary:
SetThreadStopInfo was checking for a breakpoint at the current PC several times. This merges the
identical code into a separate function. I've left one breakpoint check alone, as it was doing
more complicated stuff, and it did not see a way to merge that without making the interface
complicated. NFC.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18819
llvm-svn: 265560
Summary:
This resolves a similar problem as D16720 (which handled the case when we single-step onto a
breakpoint), but this one deals with involutary stops: when we stop a thread (e.g. because
another thread has hit a breakpont and we are doing a full stop), we can end up stopping it right
before it executes a breakpoint instruction. In this case, the stop reason will be empty, but we
will still step over the breakpoint when do the next resume, thereby missing a breakpoint hit.
I have observed this happening in TestConcurrentEvents, but I have no idea how to reproduce this
behavior more reliably.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18692
llvm-svn: 265525
Summary:
The logic to read modules from memory was added to LoadModuleAtAddress
in the dynamic loader, but not in process gdb remote. This means that when
the remote uses svr4 packets to give library info, libraries only present
on the remote will not be loaded.
This patch therefore involves some code duplication from LoadModuleAtAddress
in the dynamic loader, but removing this would require some amount of code
refactoring.
Reviewers: ADodds, tberghammer, tfiala, deepak2427, ted
Subscribers: tfiala, lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18531
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 265418
Summary:
There was a bug in linux core file handling, where if there was a running process with the same
process id as the id in the core file, the core file debugging would fail, as we would pull some
pieces of information (ProcessInfo structure) from the running process instead of the core file.
I fix this by routing the ProcessInfo requests through the Process class and overriding it in
ProcessElfCore to return correct data.
A (slightly convoluted) test is included.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18697
llvm-svn: 265391
rnb_err_t
RNBRemote::HandlePacket_stop_process (const char *p)
{
if (!DNBProcessInterrupt(m_ctx.ProcessID()))
HandlePacket_last_signal (NULL);
return rnb_success;
}
In the call to DNBProcessInterrupt we did:
nub_bool_t
DNBProcessInterrupt(nub_process_t pid)
{
MachProcessSP procSP;
if (GetProcessSP (pid, procSP))
return procSP->Interrupt();
return false;
}
This would always return false. It would cause HandlePacket_stop_process to always call "HandlePacket_last_signal (NULL);" which would send an extra stop reply packet _if_ the process is stopped. On a machine with enough cores, it would call DNBProcessInterrupt(...) and then HandlePacket_last_signal(NULL) so quickly that it will never send out an extra stop reply packet. But if the machine is slow enough or doesn't have enough cores, it could cause the call to HandlePacket_last_signal() to actually succeed and send an extra stop reply packet. This would cause problems up in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() where it would get the first stop reply packet and then possibly return or execute an async packet. If it returned, then the next packet that was sent will get the second stop reply as its response. If it executes an async packet, the async packet will get the wrong response.
To fix this I did the following:
1 - in debugserver, I fixed "bool MachProcess::Interrupt()" to return true if it sends the signal so we avoid sending the stop reply twice on slower machines
2 - Added a log line to RNBRemote::HandlePacket_stop_process() to say if we ever send an extra stop reply so we will see this in the darwin console output if this does happen
3 - Added response validators to StringExtractorGDBRemote so that we can verify some responses to some packets.
4 - Added validators to packets that often follow stop reply packets like the "m" packet for memory reads, JSON packets since "jThreadsInfo" is often sent immediately following a stop reply.
5 - Modified GDBRemoteCommunicationClient::SendPacketAndWaitForResponseNoLock() to validate responses. Any "StringExtractorGDBRemote &response" that contains a valid response verifier will verify the response and keep looking for correct responses up to 3 times. This will help us get back on track if we do get extra stop replies. If a StringExtractorGDBRemote does not have a response validator, it will accept any packet in response.
6 - In GDBRemoteCommunicationClient::SendPacketAndWaitForResponse we copy the response validator from the "response" argument over into m_async_response so that if we send the packet by interrupting the running process, we can validate the response we actually get in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse()
7 - Modified GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() to always check for an extra stop reply packet for 100ms when the process is interrupted. We were already doing this because we might interrupt a process with a \x03 packet, yet the process was in the process of stopping due to another reason. This race condition could cause an extra stop reply packet because the GDB remote protocol says if a \x03 packet is sent while the process is stopped, we should send a stop reply packet back. Now we always check for an extra stop reply packet when we manually interrupt a process.
The issue was showing up when our IDE would attempt to set a breakpoint while the process is running and this would happen:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (incorrect extra stop reply packet)
--> c
<-- OK (response from z0 packet)
Now all packet traffic was off by one response. Since we now have a validator on the response for "z" packets, we do this:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (Ignore this because this can't be the response to z0 packets)
<-- OK -- (we are back on track as this is a valid response to z0)
...
As time goes on we should add more packet validators.
<rdar://problem/22859505>
llvm-svn: 265086
Win32 API calls that are Unicode aware require wide character
strings, but LLDB uses UTF8 everywhere. This patch does conversions
wherever necessary when passing strings into and out of Win32 API
calls.
Patch by Cameron
Differential Revision: http://reviews.llvm.org/D17107
Reviewed By: zturner, amccarth
llvm-svn: 264074
We want to do a better job presenting errors that occur when evaluating
expressions. Key to this effort is getting away from a model where all
errors are spat out onto a stream where the client has to take or leave
all of them.
To this end, this patch adds a new class, DiagnosticManager, which
contains errors produced by the compiler or by LLDB as an expression
is created. The DiagnosticManager can dump itself to a log as well as
to a string. Clients will (in the future) be able to filter out the
errors they're interested in by ID or present subsets of these errors
to the user.
This patch is not intended to change the *users* of errors - only to
thread DiagnosticManagers to all the places where streams are used. I
also attempt to standardize our use of errors a bit, removing trailing
newlines and making clients omit 'error:', 'warning:' etc. and instead
pass the Severity flag.
The patch is testsuite-neutral, with modifications to one part of the
MI tests because it relied on "error: error:" being erroneously
printed. This patch fixes the MI variable handling and the testcase.
<rdar://problem/22864976>
llvm-svn: 263859
Summary:
This also adds a basic smoke test for linux core file reading. I'm checking in the core files as
well, so that the tests can run on all platforms. With some tricks I was able to produce
reasonably-sized core files (~40K).
This fixes the first part of pr26322.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18176
llvm-svn: 263628
Turns out that most of the code that runs expressions (e.g. the ObjC runtime grubber) on
behalf of the expression parser was using the currently selected thread. But sometimes,
e.g. when we are evaluating breakpoint conditions/commands, we don't select the thread
we're running on, we instead set the context for the interpreter, and explicitly pass
that to other callers. That wasn't getting communicated to these utility expressions, so
they would run on some other thread instead, and that could cause a variety of subtle and
hard to reproduce problems.
I also went through the commands and cleaned up the use of GetSelectedThread. All those
uses should have been trying the thread in the m_exe_ctx belonging to the command object
first. It would actually have been pretty hard to get misbehavior in these cases, but for
correctness sake it is good to make this usage consistent.
<rdar://problem/24978569>
llvm-svn: 263326
to each other. This should remove some infrequent teardown crashes when the
listener is not the debugger's listener.
Processes now need to take a ListenerSP, not a Listener&.
This required changing over the Process plugin class constructors to take a ListenerSP, instead
of a Listener&. Other than that there should be no functional change.
<rdar://problem/24580184> CrashTracer: [USER] Xcode at …ework: lldb_private::Listener::BroadcasterWillDestruct + 39
llvm-svn: 262863
This is a mechanical refactor. There should be no functional changes in this commit.
Instead of encapsulating just the Windows-specific data, ProcessWinMiniDump now uses a private implementation class. This reduces indirections (in the source). It makes it easier to add private helper methods without touching the header and allows them to have platform-specific types as parameters. The only trick was that the pimpl class needed a back pointer in order to call a couple methods.
llvm-svn: 262256
Additionally fix the type of some dwarf expression where we had a
confusion between scalar and load address types after a dereference.
Differential revision: http://reviews.llvm.org/D17604
llvm-svn: 262014
32-bit processes on 64-bit Windows run in a layer called WoW64 (Windows-on-Windows64). If you capture a mini dump of such a process from a 32-bit debugger, you end up with a register context for the 64-bit WoW64 process rather than the 32-bit one you probably care about.
This detects WoW64 by looking to see if there's a module named wow64.dll loaded. For such processes, it then looks in the 64-bit Thread Environment Block (TEB) to locate a copy of the 32-bit CONTEXT record that the plugin needs for the register context.
Added some rudimentary tests. I'd like to improve these later once we figure out how to get the exception information from these mini dumps.
Differential Revision: http://reviews.llvm.org/D17465
llvm-svn: 261808
Summary:
On arm64, linux<=4.4 and Android<=M there is a bug, which prevents single-stepping from working when
the system comes back from suspend, because of incorrectly initialized CPUs. This did not really
affect Android<M, because it did not use software suspend, but it is a problem for M, which uses
suspend (doze) quite extensively. Fortunately, it seems that the first CPU is not affected by
this bug, so this commit implements a workaround by forcing the inferior to execute on the first
cpu whenever we are doing single stepping.
While inside, I have moved the implementations of Resume() and SingleStep() to the thread class
(instead of process).
Reviewers: tberghammer, ovyalov
Subscribers: aemerson, rengolin, tberghammer, danalbert, srhines, lldb-commits
Differential Revision: http://reviews.llvm.org/D17509
llvm-svn: 261636
Summary:
Signalfd is not used in the code anymore, and given that the same functionality can be achieved
with the new MainLoop class, it's unlikely we will need it in the future. Remove all traces of
it.
Reviewers: tberghammer, ovyalov
Subscribers: tberghammer, danalbert, srhines, lldb-commits
Differential Revision: http://reviews.llvm.org/D17510
llvm-svn: 261631
on attach uses the architecture it has figured out, rather than the Target's
architecture, which may not have been updated to the correct value yet.
<rdar://problem/24632895>
llvm-svn: 261279
This reverts commit 293c18e067d663e0fe93e6f3d800c2a4bfada2b0.
The BKPT instruction generates SIGBUS instead of SIGTRAP in the Linux
kernel on Nexus 6 - 5.1.1 (kernel version 3.10.40). Revert the CL
until we can figure out how can we hanble the SIGBUS or how to get
back a SIGTRAP using the BKPT instruction.
llvm-svn: 260969
the xcode project file to catch switch statements that have a
case that falls through unintentionally.
Define LLVM_FALLTHROUGH to indicate instances where a case has code
and intends to fall through. This should be in llvm/Support/Compiler.h;
Peter Collingbourne originally checked in there (r237766), then
reverted (r237941) because he didn't have time to mark up all the
'case' statements that were intended to fall through. I put together
a patch to get this back in llvm http://reviews.llvm.org/D17063 but
it hasn't been approved in the past week. I added a new
lldb-private-defines.h to hold the definition for now.
Every place in lldb where there is a comment that the fall-through
is intentional, I added LLVM_FALLTHROUGH to silence the warning.
I haven't tried to identify whether the fallthrough is a bug or
not in the other places.
I haven't tried to add this to the cmake option build flags.
This warning will only work for clang.
This build cleanly (with some new warnings) on macosx with clang
under xcodebuild, but if this causes problems for people on other
configurations, I'll back it out.
llvm-svn: 260930
case where a core file has a kernel binary and a user
process dyld in the same one. Without this, we were
always picking the dyld and trying to process it as a
kernel.
<rdar://problem/24446112>
llvm-svn: 260803
In some circumstances (notably, certain minidumps), the thread CONTEXT does not have values for the
control registers (EIP, ESP, EBP, EFLAGS). There are flags in the CONTEXT which indicate which
portions are valid, but those flags weren't checked. The old code would not detect this and give a
garbage value for the register. The new code will log the problem and return an error.
I consolidated the error checking and logging into a helper function, which makes the big switch
statement easier to read and verify.
Ran tests to ensure this doesn't break anything. Manually verified that a minidump without info on
the control registers now indicates the problem instead of giving bad information.
Differential Review: http://reviews.llvm.org/D17152
llvm-svn: 260559
The UDF instruction is deprecated in armv7 and in case of thumb2
instructions set it don't work well together with the IT instruction.
Differential revision: http://reviews.llvm.org/D16853
llvm-svn: 260367
user process dyld binary and/or a mach kernel binary image. By
default, it prefers the kernel if it finds both.
But if it finds two kernel binary images (which can happen when
random things are mapped into memory), it may pick the wrong
kernel image.
DynamicLoaderDarwinKernel has heuristics to find a kernel in memory;
once we've established that there is a kernel binary in memory,
call over to that class to see if it can find a kernel address via
its search methods. If it does, use that.
Some minor cleanups to DynamicLoaderDarwinKernel while I was at it.
<rdar://problem/24446112>
llvm-svn: 259983
reason to None when we stop due to a trace, then noticed that
we were on a breakpoint that was not valid for the current thread.
That should actually have set it back to trace.
This was pr26441 (<rdar://problem/24470203>)
llvm-svn: 259684
I don't understand how this worked before, but this fixes the recent test regressions on Windows in TestConsecutiveBreakpoints.py.
Differential Revision: http://reviews.llvm.org/D16825
llvm-svn: 259605
Summary:
r259344 introduced a bug, where we fail to perform a single step, when the instruction we are
stepping onto contains a breakpoint which is not valid for this thread. This fixes the problem
and add a test case.
Reviewers: tberghammer, emaste
Subscribers: abhishek.aggarwal, lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D16767
llvm-svn: 259488
Summary:
- The patch solves Bug 23478 and Bug 19311. Resolving
Bug 23478 also resolves Bug 23039.
Correct ThreadStopInfo is set for Linux and FreeBSD
platforms.
- Summary:
When a trace event is reported, we need to check
whether the trace event lands at a breakpoint site.
If it lands at a breakpoint site then set the thread's
StopInfo with the reason 'breakpoint'. Else, set the reason
to be 'Trace'.
Change-Id: I0af9765e782fd74bc0cead41548486009f8abb87
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: jingham, emaste, lldb-commits, clayborg, ovyalov
Subscribers: emaste
Differential Revision: http://reviews.llvm.org/D16720
llvm-svn: 259344
register set indicated by ARM_THREAD_STATE32 (value 9) instead of
the old ARM_THREAD_STATE (value 1); this patch changes lldb to
accept either register set flavor code.
<rdar://problem/24246257>
llvm-svn: 258289
This is a packet which allows the remote gdb stub to ask for the address
of a symbol in the process. lldb sends the packet (offering to provide
addresses for symbol names) after every solib loaded. I changed lldb so
that once the stub has indicated that it doesn't need any more symbol
addresses, lldb will stop sending the qSymbol:: packet on new solib loads.
This can yield a performance benefit over slower communication links when
there are many solibs involved.
<rdar://problem/23310049>
llvm-svn: 257569
Summary:
Allows the remote to enumerate the link map when adding and removing
shared libraries, so that lldb doesn't need to read it manually from
the remote's memory.
This provides very large speedups (on the order of 50%) in total
startup time when using the ds2 remote on android or Tizen devices.
Reviewers: ADodds, tberghammer, tfiala
Subscribers: tberghammer, sas, danalbert, llvm-commits, srhines
Differential Revision: http://reviews.llvm.org/D16004
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 257502
Summary:
The testcase TestNoreturnUnwind.py was failing
because the unwind from the vdso library was not
successful for clang compiler while it was passing
for gcc. It was passing for gcc since the unwind plan
used was the assembly plan and the ebp register was
set by the main function in case of gcc and was not
used by the functions in the call flow to the vdso, whereas
clang did not emit assembly prologue for main and so
the assembly unwind was failing. Normally in case of
failure of assembly unwind, lldb switches to EH CFI frame
based unwinding, but this was not happening for
the first frame. This patch tries to fix this behaviour by
falling to EH CFI frame based unwinding in case of assembly
unwind failure even for the first frame.
The test is still marked as XFAIL since it relys on the fix
of another bug.
Reviewers: lldb-commits, jingham, zturner, tberghammer, jasonmolenda
Subscribers: jasonmolenda
Differential Revision: http://reviews.llvm.org/D15046
llvm-svn: 257465
at each public stop to improve performance a bit. Most of the
information lldb needed was already in the jThreadsInfo response;
complete that information and catch a few cases where we could still
fall back to getting the information via discrete memory reads.
debugserver adds 'associated_with_dispatch_queue' and 'dispatch_queue_t
keys to the jThreadsInfo response for all the threads. lldb needs the
dispatch_queue_t value. And associated_with_dispatch_queue helps to
identify which threads definitively don't have any queue information so
lldb doesn't try to do memory reads to get that information just because
it was absent in the jThreadsInfo response.
Remove the queue information from the questionmark (T) packet. We'll
get the information for all threads via the jThreadsInfo response -
sending the information for the stopping thread (on all the private
stops, plus the less frequent public stop) was unnecessary information
being sent over the wire.
SystemRuntimeMacOSX will try to get information about queues by asking
the Threads for them, instead of reading memory.
ProcessGDBRemote changes to recognize the new keys being sent in the
jThreadsInfo response. Changes to ThreadGDBRemote to track the new
information. Also, when a thread is marked as definitively not
associated with a libdispatch queue, don't fall back to the system
runtime to try memory reads to find the queue name / kind / ID etc.
<rdar://problem/23309359>
llvm-svn: 257453
Summary:
Similar to rL256704 and rL256707, fix a few text files which were
accidentally checked in with DOS line endings, or mixed line endings.
Reviewers: jingham, emaste
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D16027
llvm-svn: 257361
Summary:
When we construct AppleObjCTrampolineHandler, if m_impl_fn_addr is
invalid, we call CanJIT(). If the gdb remote process does not support
allocating and deallocating memory, this call stack will include a call
to the AppleObjCRuntime constructor. The AppleObjCRuntime constructor
will then call the AppleObjCTrampolineHandler constructor, creating a
recursive call loop that eventually overflows the stack and segfaults.
Avoid this call loop by not constructing the AppleObjCTrampolineHandler
within AppleObjCRuntime until we actually need to use it.
Reviewers: clayborg, jingham
Subscribers: sas, lldb-commits
Differential Revision: http://reviews.llvm.org/D15978
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 257204
"qserial" to "qserialnum" because "qserial" looks a lot like the
queue type (either 'serial' or 'concurrent') and can be confusing
to read through. debugserver passes these up either in the questionmark
("T") packet, or in the response to the jThreadsInfo packet.
llvm-svn: 257121
Summary:
Some debug servers don't support it so there's no point in spamming
this.
Reviewers: clayborg
Subscribers: fjricci, lldb-commits
Differential Revision: http://reviews.llvm.org/D15972
llvm-svn: 257116
Summary:
For O32 abi register size should be 4 bytes.
For N32 and N64 abi register size should be 8 bytes.
This patch will make register read/write to set/get the size of register according to abi.
Reviewers: clayborg, tberghammer
Subscribers: lldb-commits, nitesh.jain, mohit.bhakkad, bhushan, jaydeep
Differential: http://reviews.llvm.org/D15884
llvm-svn: 256834
(There are changes in the copies of these four files in the FreeBSD base
system, and I've changed these ones to reduce gratuitous diffs in future
imports.)
llvm-svn: 256723
"thread-pcs" key is added to the T (questionmark) packet in
gdb-remote protocol so that lldb doesn't need to query the
pc values of every thread before it resumes a process.
The only odd part with this is that I'm sending the pc
values in big endian order, so we need to know the endianness
of the remote process before we can use them. All other
register values in gdb-remote protocol are sent in native-endian
format so this requirement doesn't exist. This addition is a
performance enhancement -- lldb will fall back to querying the
pc of each thread individually if it needs to -- so when
we don't have the byte order for the process yet, we don't
use these values. Practically speaking, the only way I've
been able to elicit this condition is for the first
T packet when we attach to a process.
<rdar://problem/21963031>
llvm-svn: 255942
This patch will fix the test case test_p_returns_correct_data_size_for_each_qRegisterInfo_attach_llgs_* of TestLldbGdbServer.py on mips. The test fails because we were sending RegisterInfo for msa registers to client even when msa registers are not available. With this commit server will send E45(end of resigters) response if msa registers are not available.
llvm-svn: 255108
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
* Add support for representing signed integers
* Add new constructors taking any signed or unsigned integer types
Differential revision: http://reviews.llvm.org/D15187
llvm-svn: 254715
Summary:
- Problem occurs when:
-- 32-bit inferiors run on x86_32 machine and
the architecture doesn't have AVX feature
-- This causes FPRType to be set to eFPRTypeFXSAVE
-- PTRACE_GETFPREGS was being used to read FXSAVE area
-- For 32-bit inferiors running on x86_32 machine,
PTRACE_GETFPREGS reads FSAVE area and not FXSAVE area
- Changed ptrace API to PTRACE_GETREGSET for 32-bit inferiors
-- This reads FPR data in FXSAVE format.
-- For 64-bit inferiors, no change has been made.
- Modified XFAIL for TestReturnValue.py
-- Earlier, this test was passing for Linux OS
-- Now, it passes for Android OS as well
Change-Id: Ieed72bc969b79516fc7b263b32493aa1e7a1a2ac
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ovyalov, jingham, lldb-commits, tberghammer, labath
Subscribers: jevinskie, labath, tberghammer, danalbert
Differential Revision: http://reviews.llvm.org/D15042
llvm-svn: 254499
This patch will clear bug 25194 - LLDB-Server Assertion raised when single stepping on MIPS. The problem was that while emulating instructions, old and new pc values would have garbage value in their upper 32 bits. Therefore checking if pc was changed (old_pc == new_pc) would always return false, because of which pc was not getting updated.
/* If we haven't changed the PC, change it here */
if (old_pc == new_pc)
{
new_pc += 4;
Context context;
return false;
}
Reviewers: tberghammer, clayborg
Subscribers: dsanders, lldb-commits, mohit.bhakkad, bhushan, jaydeep, nitesh.jain
Differential: http://reviews.llvm.org/D14633
llvm-svn: 254379
Summary:
This makes sure we do not attempt to send output over the gdb-remote protocol when the client is
not expecting it (i.e., after sending the stop-reply packet). Normally, this should not happen
(the process cannot generate output when it is stopped), but due to the fact that pty
communication is asynchronous in the linux kernel (llvm.org/pr25652), we may sometimes get this
output too late. Instead, we just hold the output, and send it next time we resume. This is not
ideal, but at least it makes sure we do not violate the remote protocol. Given that this happens
extremely rarely it's not worth trying to work around it with sleeps or something like that.
I also remove the m_stdio_communication_mutex, as all of LLGS is now single-threaded anyway.
Reviewers: tberghammer, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15019
llvm-svn: 254200
Summary:
- Reason of both bugs:
1. For the very first frame, Unwinder doesn't check the validity
of Full UnwindPlan before creating StackFrame from it:
When 'process launch' command is run after setting a breakpoint
in inferior, the Unwinder runs and saves only Frame 0 (the frame
in which breakpoint was set) in thread's StackFrameList i.e.
m_curr_frames_sp. However, it doesn't check the validity of the
Full UnwindPlan for this frame by unwinding 2 more frames further.
2. Unwinder doesn't update the CFA value of Cursor when Full UnwindPlan
fails and FallBack UnwindPlan succeeds in providing valid CFA values
for frames:
Sometimes during unwinding of stack frames, the Full UnwindPlan
inside the RegisterContextLLDB object may fail to provide valid
CFA values for these frames. Then the Fallback UnwindPlan is used
to unwind the frames.
If the Fallback UnwindPlan succeeds, then it provides a valid new
CFA value. The RegisterContextLLDB::m_cfa field of Cursor object
is updated during the Fallback UnwindPlan execution. However,
UnwindLLDB misses the implementation to update the 'cfa' field
of this Cursor with this valid new CFA value.
- This patch fixes both these issues.
- Remove XFAIL in test files corresponding to these 2 Bugs
Change-Id: I932ea407545ceee2d628f946ecc61a4806d4cc86
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: jingham, lldb-commits, jasonmolenda
Subscribers: lldb-commits, ovyalov, tberghammer
Differential Revision: http://reviews.llvm.org/D14226
llvm-svn: 253026
They get treated as special RLE encoding symbols and packets get
corrupted. Most other packet types already know about this apparently,
but QEnvironment missed these two.
Should fix PR25300.
llvm-svn: 252521
Summary:
Since this is within the lldb namespace, the compiler tries to
export a symbol for it. Unfortunately, since it is inlined, the
symbol is hidden and this results in a mess of warnings when
building on OS X with cmake.
Moving it to the lldb_private namespace eliminates that problem.
Reviewers: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D14417
llvm-svn: 252396
in places where we check for Triple::IOS. They're mostly the same as far
as lldb is conerned.
.
Also add a base cass implementation for Process::IsAlive - Greg added this
last year but it didn't get upstreamed.
llvm-svn: 252227
To do this I added a few new ways to determine the OS from PT_NOTE notes in the ELF file:
1 - Look for "LINUX" notes which indicate "linux" should be the OS
2 - Look through the "CORE" notes with NT_FILE as the type and sniff data from the paths listed in this section. On Ubuntu they contain "/lib/x86_64-linux-gnu" which has the triple and allows us to set "linux" as the OS in the architecture returned from ObjectFileELF::GetArchitecture().
Setting the OS correctly allows us to get the triple correct so we can extract registers without asserting and killing LLDB.
Also use the data from the NT_FILE to set the main executable if one isn't set in ProcessElfCore::DoLoadCore().
llvm-svn: 251537
Summary:
Gdb-remote's async thread sent out the eBroadcastBitRunPacketSent message *before* actually
sending out the continue packet. Since it's this message the actually triggers the public state
transition, it could happen (and it did happen in TestAttachResume, which does an "process
interrupt" right after a continue) that we attempt to stop the inferior before it was actually
started (which obviously did not end well). This fixes the problem by moving the broadcast after
the packet was actually sent.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14083
llvm-svn: 251399
This avoids the need to query the PC for private resume operations (public resumes have the PC
from the bigger jStopInfo packet) and speeds up the stepping on an android target by about 10%
(it some cases even more).
llvm-svn: 251301
This is just a trivial patch that corrects a couple of return value account to function's return type.
Also corrects typo in hardware breakpoint handler.
llvm-svn: 251269
Summary:
These changes aren't everything what is needed for the CMake target, but it's significantly approaching it.
These changes shouldn't effect the build process on other platforms.
Patch by Kamil Rytarowski, thanks!
Reviewers: joerg, brucem
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13711
llvm-svn: 251164
* Use PTRACE_GETVFPREGS/PTRACE_SETVFPREGS to access the floating point
registers instead of the old PTRACE_GETFPREGS/PTRACE_SETFPREGS. The
new call is available since armv5.
* Work around a kernel issue in PTRACE_POKEUSER with reading out the full
register set, modifying the neccessary value and then writing it back.
llvm-svn: 251111
This allows open source MacOSX clients to not have to build debugserver and the current LLDB can find debugserver inside the selected Xcode.app on your system.
<rdar://problem/23167253>
llvm-svn: 250735
This patch corrects the number of bytes of debug register resources which are written while installing or removing a breakpoint using ptrace interface on arm64 targets.
Differential revision: http://reviews.llvm.org/D12522
llvm-svn: 250700
For o32 applications on mips we were getting segmentation fault while launching lldb-server because of overwritting stack when using elf_gregset_t in DoWriteRegisterValue.
We are now using the GPR_mips_linux buffer in DoWriteRegisterValue as done in DoReadRegisterValue also, which solves the above issue.
llvm-svn: 250696
There were a number of const qualifiers being cast away which caused warnings.
This cluttered the output hiding real errors. Silence them by explicit casting.
NFC.
llvm-svn: 250662
disabled the use of the jThreadGetExtendedInfo packet which is used
to retrieve additional information about a thread, such as the QoS
setting for that thread on darwin systems.
Re-enable the use of the jThreadGetExtendedInfo packet, and add
some quick tests to the TestQueues mac test case which will verify
that we can retrieve the QoS names for these test threads.
<rdar://problem/22925096>
llvm-svn: 250364
Most platforms have "/dev/null". Windows has "nul". Instead of
hardcoding the string /dev/null at various places, make a constant
that contains the correct value depending on the platform, and use
that everywhere instead.
llvm-svn: 250331
Summary:
This commit adds support for binary memory reads ($x) to lldb-server. It also removes the "0x"
prefix from the $x client packet, to make it more compatible with the old $m packet. This allows
us to use almost the same code for handling both packet types. I have verified that debugserver
correctly handles $x packets even without the leading "0x". I have added a test which verifies
that the stub returns the same memory contents for both kinds of memory reads ($x and $m).
Reviewers: tberghammer, jasonmolenda
Subscribers: iancottrell, lldb-commits
Differential Revision: http://reviews.llvm.org/D13695
llvm-svn: 250295
set to true, but all plans run by RunThreadPlan need to have this set to false so they will
return control to RunThreadPlan without consulting plans higher on the stack.
Since this seems like a common error, I also modified RunThreadPlan to enforce this behavior.
<rdar://problem/22543166>
llvm-svn: 250084
Summary:
- Changed from 16 bits to 8 bits for Intel Architecture
-- FXSAVE structure now conforms with the layout of FXSAVE
area specified by IA Architecture Software Developer Manual
- Modified Linux and FreeBSD specific files to support this change
-- MacOSX already uses 8 bits for ftag register
- Modified TestRegisters.py and a.cpp:
-- Change allows 8 bit comparison of ftag values
-- Change resolves Bug 24733:
Removed XFAIL for Clang as the test works and passes for
Clang compiler as well
-- Change provides a Generic/Better way of testing Bug 24457
and Bug 25050 by using 'int3' inline assembly in inferior
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ovyalov, jingham, clayborg
Subscribers: tfiala, emaste
Differential Revision: http://reviews.llvm.org/D13587
llvm-svn: 250022
Summary:
EnablePluginLogging, GetPluginCommandHelp and ExecutePluginCommand aren't
implemented or used anywhere, so remove them from the Hexagon and POSIX
Dynamic Loaders as well as the FreeBSD process.
Reviewers: clayborg, labath, emaste
Subscribers: lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D13581
llvm-svn: 249840
when they introduced android testsuite regressions. Pavel has run the
testsuite against the updated patch and it completes cleanly now.
The original commit message:
Fixing a subtle issue on Mac OS X systems with dSYMs (possibly
introduced by r235737 but I didn't look into it too closely).
A dSYM can have a per-UUID plist in it which tells lldb where
to find an executable binary for the dSYM (DBGSymbolRichExecutable)
- other information can be included in this plist, like how to
remap the source file paths from their build pathnames to their
long-term storage pathnames.
This per-UUID plist is a unusual; it is used probably exclusively
inside apple with our build system. It is not created by default
in normal dSYMs.
The problem was like this:
1. lldb wants to find an executable, given only a UUID
(this happens when lldb is doing cross-host debugging
and doesn't have a copy of the target system's binaries)
2. It eventually calls LocateMacOSXFilesUsingDebugSymbols
which does a spotlight search for the dSYM on the local
system, and failing that, tries the DBGShellCommands
command to find the dSYM.
3. It gets a dSYM. It reads the per-UUID plist in the dSYM.
The dSYM has a DBGSymbolRichExecutable kv pair pointing to
the binary on a network filesystem.
4. Using the binary on the network filesystem, lldb now goes
to find the dSYM.
5. It starts by looking for a dSYM next to the binary it found.
6. lldb is now reading the dSYM over a network filesystem,
ignoring the one it found on its local filesystem earlier.
Everything still *works* but it's much slower.
This would be a tricky one to write up in a testsuite case;
you really need the binary to not exist on the local system.
And LocateMacOSXFilesUsingDebugSymbols will only compile on
Mac OS X - even if I found a way to write up a test case, it
would not run anywhere but on a mac.
One change Greg wanted while I was touching this code was to
have LocateMacOSXFilesUsingDebugSymbols (which could be asked
to find a binary OR find a dSYM) to instead return a ModuleSpec
with the sum total of everything it could find. This
change of passing around a ModuleSpec instead of a FileSpec
was percolated up into ModuleList::GetSharedModule.
The changes to LocateMacOSXFilesUsingDebugSymbols look larger
than they really are - there's a lot of simple whitespace changes
in there.
I ran the testsuites on mac, no new regressions introduced
<rdar://problem/21993813>
llvm-svn: 249755
* Use .ARM.exidx as a fallback unwind plan for non-call site when the
instruction emulation based unwind failed.
* Work around an old compiler issue where the compiler isn't sort the
entries in .ARM.exidx based on their address.
* Fix unwind info parsing when the virtual file address >= 0x80000000
* Fix bug in unwind info parsing when neither lr nor pc is explicitly
restored.
Differential revision: http://reviews.llvm.org/D13380
llvm-svn: 249119
GP registers for o32 applications were always giving zero value because SetType() on the RegisterValue was causing the accessor functions to pickup the value from m_scalar of RegisterValue which is zero.
In this patch byte size and byte order of register value is set at the time of setting the value of the register.
llvm-svn: 249020
introduced by r235737 but I didn't look into it too closely).
A dSYM can have a per-UUID plist in it which tells lldb where
to find an executable binary for the dSYM (DBGSymbolRichExecutable)
- other information can be included in this plist, like how to
remap the source file paths from their build pathnames to their
long-term storage pathnames.
This per-UUID plist is a unusual; it is used probably exclusively
inside apple with our build system. It is not created by default
in normal dSYMs.
The problem was like this:
1. lldb wants to find an executable, given only a UUID
(this happens when lldb is doing cross-host debugging
and doesn't have a copy of the target system's binaries)
2. It eventually calls LocateMacOSXFilesUsingDebugSymbols
which does a spotlight search for the dSYM on the local
system, and failing that, tries the DBGShellCommands
command to find the dSYM.
3. It gets a dSYM. It reads the per-UUID plist in the dSYM.
The dSYM has a DBGSymbolRichExecutable kv pair pointing to
the binary on a network filesystem.
4. Using the binary on the network filesystem, lldb now goes
to find the dSYM.
5. It starts by looking for a dSYM next to the binary it found.
6. lldb is now reading the dSYM over a network filesystem,
ignoring the one it found on its local filesystem earlier.
Everything still *works* but it's much slower.
This would be a tricky one to write up in a testsuite case;
you really need the binary to not exist on the local system.
And LocateMacOSXFilesUsingDebugSymbols will only compile on
Mac OS X - even if I found a way to write up a test case, it
would not run anywhere but on a mac.
One change Greg wanted while I was touching this code was to
have LocateMacOSXFilesUsingDebugSymbols (which could be asked
to find a binary OR find a dSYM) to instead return a ModuleSpec
with the sum total of everything it could find. This
change of passing around a ModuleSpec instead of a FileSpec
was percolated up into ModuleList::GetSharedModule.
The changes to LocateMacOSXFilesUsingDebugSymbols look larger
than they really are - there's a lot of simple whitespace changes
in there.
I ran the testsuites on mac, no new regressions introduced
<rdar://problem/21993813>
llvm-svn: 248985
.ARM.exidx/.ARM.extab sections contain unwind information used on ARM
architecture from unwinding from an exception.
Differential revision: http://reviews.llvm.org/D13245
llvm-svn: 248903
on iOS devices; fallout from Vince's cleanups made
in r237218 back in May. iOS native lldbs will call
StartDebugserverProcess() with a random port #
(see ProcessGDBRemote::LaunchAndConnectToDebugserver)
and neither side of this conditional expression should
be followed in that case.
I added an "if (in_port == 0) { ..." check around the
entire if/then/else and indented the block of code so
the diff looks larger than it really is.
<rdar://problem/21712643>
llvm-svn: 248343
If a breakpoint was hit in the inferior after shutdown had
started but before it was complete, it would cause an unclean
terminate of the inferior, leading to various problems the most
visible of which is that handles to the inferior executable would
remain locked, and the test suite would fail to run subsequent
tests because it could not recompile the inferior.
This fixes a major source of flakiness in the test suite.
llvm-svn: 247929
Character with ASCII code 0 is incorrectly treated by LLDB as the end of
RSP packet. The left of the debugger server output is silently ignored.
Patch from evgeny.leviant@gmail.com
Reviewed by: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12523
llvm-svn: 247908
The Go runtime schedules user level threads (goroutines) across real threads.
This adds an OS plugin to create memory threads for goroutines.
It supports the 1.4 and 1.5 go runtime.
Differential Revision: http://reviews.llvm.org/D5871
llvm-svn: 247852
The implications of this bug where that "log disable windows" would
not actually disable the log, and worse it would lock the file handle
making it impossible to delete the file until lldb was shut down.
This was then causing the test suite to fail, because the test suite
tries to delete log files in certain situations.
llvm-svn: 247841
SUMMARY:
Refer to http://lists.llvm.org/pipermail/lldb-dev/2015-August/008024.html for discussion
on this topic. Bare-iron target like YAMON gdb-stub does not support qProcessInfo, qC,
qfThreadInfo, Hg and Hc packets. Reply from ? packet is as simple as S05. There is no
packet which gives us process or threads information. In such cases, assume pid=tid=1.
Reviewers: clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D12876
llvm-svn: 247773
"gcc" register numbers are now correctly referred to as "ehframe"
register numbers. In almost all cases, ehframe and dwarf register
numbers are identical (the one exception is i386 darwin where ehframe
regnums were incorrect).
The old "gdb" register numbers, which I incorrectly thought were
stabs register numbers, are now referred to as "Process Plugin"
register numbers. This is the register numbering scheme that the
remote process controller stub (lldb-server, gdbserver, core file
support, kdp server, remote jtag devices, etc) uses to refer to the
registers. The process plugin register numbers may not be contiguous
- there are remote jtag devices that have gaps in their register
numbering schemes.
I removed all of the enums for "gdb" register numbers that we had
in lldb - these were meaningless - and I put LLDB_INVALID_REGNUM
in all of the register tables for the Process Plugin regnum slot.
This change is almost entirely mechnical; the one actual change in
here is to ProcessGDBRemote.cpp's ParseRegisters() which parses the
qXfer:features:read:target.xml response. As it parses register
definitions from the xml, it will assign sequential numbers as the
eRegisterKindLLDB numbers (the lldb register numberings must be
sequential, without any gaps) and if the xml file specifies register
numbers, those will be used as the eRegisterKindProcessPlugin
register numbers (and those may have gaps). A J-Link jtag device's
target.xml does contain a gap in register numbers, and it only
specifies the register numbers for the registers after that gap.
The device supports many different ARM boards and probably selects
different part of its register file as appropriate.
http://reviews.llvm.org/D12791
<rdar://problem/22623262>
llvm-svn: 247741
Summary:
Linux and FreeBSD occasionally send SI_KERNEL codes, nonexistent on other platforms.
Problem caught on NetBSD.
Reviewers: joerg, sas
Subscribers: sas, lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D12659
Change by Kamil Rytarowski <n54@gmx.com>
llvm-svn: 247579
RegisterContextPOSIX.h is poorly named and contains only the declaration
of POSIXBreakpointProtocol, which is used for in-process live kernel
debugging. It is now relevant only to FreeBSD.
In source/Plugins/Process/Utility/RegisterContext*.h (after assorted
rework and refactoring) it only served the purpose of #including other
necessary headers as a side-effect. Remove it from them and just include
the required headers directly.
Differential Revision: http://reviews.llvm.org/D12830
llvm-svn: 247558
Summary:
Realtime signals generally do not represent an error condition in an application but are more
like a regular means of IPC. As such, we shouldn't interrupt an application whenever it recieves
one. If any application will use these signals, it will probably use them a lot, rendering it's
debugging tiresome if we stopped at every signal. Furthermore, these signals are likely to be used
in a low level library, and the programmer may not even be aware of their presence.
For these reasons, I am switching the default disposition of realtime signals on all supported
platforms (i.e. Linux and Freebsd) to no-stop, no-notify. Any user still wishing to receive these
signals can always change the default to suit his needs.
Reviewers: ovyalov, emaste
Subscribers: lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D12795
llvm-svn: 247537
In some special case (e.g. signal handlers, hand written assembly) it is
valid to have 2 stack frame with the same CFA value. This CL change the
looping stack detection code to report a loop only if at least 3
consecutive frames have the same CFA.
Differential revision: http://reviews.llvm.org/D12699
llvm-svn: 247133
qXfer:features:read:target.xml packet, or via the
plugin.process.gdb-remote.target-definition-file setting, if the
register definition doesn't give us eh_frame or DWARF register
numbers for that register, try to get that information from the ABI
plugin.
The DWARF/eh_frame register numbers are defined in the ABI
standardization documents - so getting this from the ABI plugin is
reasonable. There's little value in having the remote stub inform
us of this generic information, as long as we can all agree on the
names of the registers.
There's some additional information we could get from the ABI. For
instance, on ABIs where function arguments are passed in registers,
lldb defines alternate names like "arg1", "arg2", "arg3" for these
registers so they can be referred to that way by the user. We could
get this from the ABI if the remote stub doesn't provide that. That
may be something worth doing in the future - but for now, I'm keeping
this a little more minimal.
Thinking about this, what we want/need from the remote stub at a
minimum are:
1. The names of the register
2. The number that the stub will use to refer to the register with
the p/P packets and in the ? response packets (T/S) where
expedited register values are provided
3. The size of the register in bytes
(nice to have, to remove any doubt)
4. The offset of the register in the g/G packet if we're going to
use that for reading/writing registers.
debugserver traditionally provides a lot more information in
addition to this via the qRegisterInfo packet, and debugserver
augments its response to the qXfer:features:read:target.xml
query to include this information. Including:
DWARF regnum, eh_frame regnum, stabs regnum, encoding (ieee754,
Uint, Vector, Sint), format (hex, unsigned, pointer, vectorof*,
float), registers that should be marked as invalid if this
register is modified, and registers that contain this register.
We might want to get all of this from the ABI - I'm not convinced
that it makes sense for the remote stub to provide any of these
details, as long as the ABI and remote stub can agree on register
names.
Anyway, start with eh_frame and DWARF coming from the ABI if
they're not provided by the remote stub. We can look at doing
more in the future.
<rdar://problem/22566585>
llvm-svn: 247121
When lldb receives a gdb-remote protocol packet that has
nonprintable characters, it will print the packet in
gdb-remote logging with binary-hex encoding so we don't
dump random 8-bit characters into the packet log.
I'm changing this check to allow whitespace characters
(newlines, linefeeds, tabs) to be printed if those are
the only non-printable characters in the packet.
This is primarily to get the response to the
qXfer:features:read:target.xml packet to show up in the
packet logs in human readable form. Right now we just
get a dozen kilobytes of hex-ascii and it's hard to
figure out what register number scheme is being used.
llvm-svn: 247120
Summary:
- For 'register read --all' command on x86_64-Linux Platform:
-- Provide correct values of X87 FPU Special Purpose Registers
-- Both 32-bit & 64-bit inferiors give correct values on this
Platform
- Added a Test Vector:
-- To verify the expected behaviour of the command
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ashok.thirumurthi, granata.enrico, tfiala, clayborg
Differential Revision: http://reviews.llvm.org/D12592
llvm-svn: 246955
Summary:
There was a race condition in the AsyncThread, where we would end up sending a vAttach
notification to the thread before it got a chance set up its listener (this can be reproduced by
adding a sleep() at the very beginning of ProcessGDBRemote::AsyncThread()). This event would then
get lost and we LLDB would deadlock. I fix this by setting up the listener early on, in the
ProcessGDBRemote constructor.
This should improve the stability of all attach tests. For now, I am removing XTIMEOUT from
TestAttachResume, and will watch the buildbots for signs of trouble.
Reviewers: clayborg, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12552
llvm-svn: 246756
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
When detaching, we need to detach from all threads of the inferior and not just the main one.
Without this, a multi-threaded inferior would usually crash once the server exits.
llvm-svn: 246549
Linux sometimes sends us a PTRACE_EVENT_EXIT when an inferior process gets a SIGKILL. This can be
confusing, since normally we don't expect any events when the inferior is stopped. This commit
adds code to handle this situation (resume the thread and let it exit normally) and avoid an
assertion failure in ResumeThread().
llvm-svn: 246539
code that looks for a second stop-reply packet in response to an
interrupt (control-c). This is to handle the case where where a
stop packet is making its way up to lldb right as lldb decides to
interrupt the inferior. If the inferior is running and we interrupt
it, we'd expect a T11 type response meaning that the inferior halted
because of the interrupt. But if the interrupt gets a T05 type
response instead, meaning that we stopped execution by hitting a
breakpoint or whatever, then the interrupt was received while the
inferior was already paused and so it is treated as a "?" packet
-- the remote stub will send the stop message a second time.
There's a timeout where we wait to get this second stop reply packet
in SendContinuePacketAndWaitForResponse, currently 1ms. For a slow
remote target, it may take longer than that to send the second stop
reply packet. If that happens, then lldb will use that second stop
reply packet as the response for the next packet request it makes
to the remote stub. The two will be out of sync by one packet for
the rest of the debug session and it's going to go badly from then on.
I've seen times as slow as 46ms, and given the severity of missing that
second stop reply packet, I'm increasing the timeout to 100ms, or 0.1sec.
<rdar://problem/21990791>
llvm-svn: 246004
http://reviews.llvm.org/D9703
This updated patches correct problems in arm hardware watchpoint support patch posted earlier.
This patch has been tested on samsung chromebook (ARM - Linux) and PandaBoard using basic watchpoint test application.
Also it was tested on Nexus 7 Android device.
On chromebook linux we are able to set and clear all types of watchpoints but on android we end up getting a watchpoint packet error because we are not able to call hardware watchpoint ptrace functions successfully.
llvm-svn: 245961
Setting and getting register values as bytes instead of depending on the 128 bit integer support in register value.
This patch will fix the build failure in the release branch.
Reviewers: tberghammer, clayborg, hans
Subscribers: bhushan, nitesh.jain, jaydeep, lldb-commits
Differential: http://reviews.llvm.org/D12275
llvm-svn: 245927
Summary:
Most NPL private functions took (shared) pointers to threads as arguments. This meant that the
callee could not be sure if the pointer was valid and so most functions were peppered with
null-checks. Now, I move the check closer to the source, and pass around the threads as
references (which are then assumed to be valid).
Reviewers: tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12237
llvm-svn: 245831
Summary:
When a windows remote stops because of a DLL load/unload, the debug server
sends a stop reply packet that contains a `library` key with any value (usually
just `library:1`). This indicates to the debugger that a library has been
loaded or unloaded and that the list of libraries should be refreshed (usually
with `qXfer:libraries:read`).
This change just triggers a call to `LoadModules()` which in turns will send a
remote library read command when a stop reply that requests it is received.
Reviewers: clayborg, zturner, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12218
llvm-svn: 245708
Summary:
NPL used to be peppered with casts of the NativeThreadProtocol objects into NativeThreadLinux. I
move these closer to the source where we obtain these objects. This way, the rest of the code can
assume we are working with the correct type of objects.
Reviewers: ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12187
llvm-svn: 245681
This was breaking disassembly for arm machines that we force to be
thumb mode all the time because we were only checking for llvm::Triple::arm.
i.e.
armv6m (ARM Cortex-M0)
armv7m (ARM Cortex-M3)
armv7em (ARM Cortex-M4)
<rdar://problem/22334522>
llvm-svn: 245645
There might be an underlying race condition here that should be
figured out, but this at least prevents the crash for the time
being and doesn't appear to have any adverse effects.
llvm-svn: 245626
Summary:
This is useful when dealing with Windows remote that use only the
qXfer:libraries command which returns absolute base addresses, as
opposed to qXfer:libraries-svr4 which returns relative offsets for
module bases.
Reviewers: clayborg, zturner, ADodds
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12204
llvm-svn: 245625
Summary: Size specifier should come after `%` not before.
Reviewers: clayborg, ADodds
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12203
llvm-svn: 245608
Summary:
There was a bug in NativeProcessLinux, where doing an instruction-level single-step over the
thread-creation syscall resulted in loss of control over the inferior. This happened because
after the inferior entered the thread-creation maintenance stop, we unconditionally performed a
PTRACE_CONT, even though the original intention was to do a PTRACE_SINGLESTEP. This is fixed by
storing the original state of the thread before the stop (stepping or running) and then
performing the appropriate action when resuming.
I also get rid of the callback in the ThreadContext structure, which stored the lambda used to
resume the thread, but which was not used consistently.
A test verifying the correctness of the new behavior is included.
Reviewers: ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12104
llvm-svn: 245545
to the user. e.g. specified via the
plugin.process.gdb-remote.target-definition-file
setting. Currently we silently ignore the target definition if
there is a parse error.
llvm-svn: 245536
Summary:
Due to fork()/execve(), the launched inferior inherits the signal mask of its parent (lldb-server). But because lldb-server modifies its signal mask (It blocks SIGCHLD, for example), the inferior starts with some signals being initially blocked.
One consequence is that TestCallThatRestarts.ExprCommandThatRestartsTestCase (test/expression_command/call-restarts) fails because sigchld_handler() in lotta-signals.c is not called, due to the SIGCHLD signal being blocked.
To prevent the signal masking done by lldb-server from affecting the created inferior, the signal mask of the inferior is now cleared before the execve().
Patch by: Yacine Belkadi
Reviewers: ovyalov, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12138
llvm-svn: 245436
Summary:
in case we are logging to stdout, any log lines from the forked child can be misconstrued to be
inferior output. To avoid this, we disable all logging immediately after forking.
I also fix the implementatoion of DisableAllLogChannels, which was a no-op before this commit.
Reviewers: clayborg, ovyalov
Subscribers: dean, lldb-commits
Differential Revision: http://reviews.llvm.org/D12083
llvm-svn: 245272
This patch :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
Reviewers: jaydeep, clayborg, jasonmolenda, ovyalov, emaste
Subscribers: tberghammer, ovyalov, emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential: http://reviews.llvm.org/D10919
llvm-svn: 245217
numbers in the key name "ehframe" or "eh_frame" in addition to the deprecated
"gcc" name (e.g. from a plugin.process.gdb-remote.target-definition-file
python file).
llvm-svn: 245151
for eh_frame and stabs register numberings. This is not
complete but it's a step in the right direction. It's almost
entirely mechanical.
lldb informally uses "gcc register numbering" to mean eh_frame.
Why? Probably because there's a notorious bug with gcc on i386
darwin where the register numbers in eh_frame were incorrect.
In all other cases, eh_frame register numbering is identical to
dwarf.
lldb informally uses "gdb register numbering" to mean stabs.
There are no official definitions of stabs register numbers
for different architectures, so the implementations of gdb
and gcc are the de facto reference source.
There were some incorrect uses of these register number types
in lldb already. I fixed the ones that I saw as I made
this change.
This commit changes all references to "gcc" and "gdb" register
numbers in lldb to "eh_frame" and "stabs" to make it clear
what is actually being represented.
lldb cannot parse the stabs debug format, and given that no
one is using stabs any more, it is unlikely that it ever will.
A more comprehensive cleanup would remove the stabs register
numbers altogether - it's unnecessary cruft / complication to
all of our register structures.
In ProcessGDBRemote, when we get register definitions from
the gdb-remote stub, we expect to see "gcc:" (qRegisterInfo)
or "gcc_regnum" (qXfer:features:read: packet to get xml payload).
This patch changes ProcessGDBRemote to also accept "ehframe:"
and "ehframe_regnum" from these remotes.
I did not change GDBRemoteCommunicationServerLLGS or debugserver
to send these new packets. I don't know what kind of interoperability
constraints we might be working under. At some point in the future
we should transition to using the more descriptive names.
Throughout lldb we're still using enum names like "gcc_r0" and "gdb_r0",
for eh_frame and stabs register numberings. These should be cleaned
up eventually too.
The sources link cleanly on macosx native with xcode build. I
don't think we'll see problems on other platforms but please let
me know if I broke anyone.
llvm-svn: 245141
Summary:
For Linux x86 based environments the orig_eax/orig_rax
register should be set to -1 to prevent the instruction pointer
to be decremented, which was the cause for the SIGILL exception.
Fix for Bug 23659
Reviewers: zturner, ashok.thirumurthi, mikesart, jingham, clayborg
Subscribers: clayborg, labath
Differential Revision: http://reviews.llvm.org/D11411
llvm-svn: 244875
SUMMARY:
The patch uses qfThreadID to get the thread IDs if qC packet is not supported by target.
Reviewers: jingham, clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D11519
llvm-svn: 244866
SUMMARY:
The patch supports TAAwatch:addr packet. The patch also sets m_watchpoints_trigger_after_instruction
to eLazyBoolNo when qHostInfo or qWatchpointSupportInfo is not supported by the target.
Reviewers: jingham, clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D11747
llvm-svn: 244865
SUMMARY:
Last 3bits of the watchpoint address are masked by the kernel. For example, n is
at 0x120010d00 and m is 0x120010d04. When a watchpoint is set at m, then watch
exception is generated even when n is read/written. To handle this case, instruction
at PC is emulated to find the base address of the load/store instruction. This address
is then appended to the description of the stop-info packet. Client then reads this
information to check whether the user has set a watchpoint on this address.
Reviewers: jingham, clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D11672
llvm-svn: 244864
On x86/x86_64 read only watchpoints aren't supported. Fall back
to read/write watchpoints in that case.
Note: Logic should be added to ignore the watchpoint hit when
occurred because of a write.
llvm-svn: 244742
This is more preparation for multiple different kinds of types from different compilers (clang, Pascal, Go, RenderScript, Swift, etc).
llvm-svn: 244689
The issue was we were sending a "qSymbol::" packet and it we were already disconnected were weren't exiting the while loop if we didn't successfully send the qSymbol packet.
<rdar://problem/22098746>
llvm-svn: 244683
This change :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
- Eliminates ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and uses llvm::APInt and llvm::APFloat for all integer and floating point types.
Reviewers : emaste, jaydeep, clayborg
Subscribers : emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential : http://reviews.llvm.org/D10919
llvm-svn: 244308
working with (the Communication m_bytes ivar) contained a single packet.
Instead, it may contain multitudes. Find the boundaries of the first packet
in the buffer and replace that with the decompressed version leaving the
rest of the buffer unmodified.
<rdar://problem/21841377>
llvm-svn: 243846
On FreeBSD the tid is (somewhat unintuitively) found in the pr_pid
field of the NT_PRSTATUS note. Collect it when parsing the note and
store it in the thread data.
For Linux I've left the original behaviour of using sequential TIDs
(0, 1, 2...) as I don't yet have code to obtain it.
Differential Revision: http://reviews.llvm.org/D11652
llvm-svn: 243748
Previously embedded interpreters were handled as ad-hoc source
files compiled into source/Interpreter. This made it hard to
disable a specific interpreter, or to add support for other
interpreters and allow the developer to choose which interpreter(s)
were enabled for a particular build.
This patch converts script interpreters over to a plugin-based system.
Script interpreters now live in source/Plugins/ScriptInterpreter, and
the canonical LLDB interpreter, ScriptInterpreterPython, is moved there
as well.
Any new code interfacing with the Python C API must live in this location
from here on out. Additionally, generic code should never need to
reference or make assumptions about the presence of a specific interpreter
going forward.
Differential Revision: http://reviews.llvm.org/D11431
Reviewed By: Greg Clayton
llvm-svn: 243681
Summary:
If we used unnamed pipes instead of named pipes, we can avoid having the
file system littered with debugserver-named-pipes if lldb-server happens to
crash for whatever reason. Also, on some buggy systems, it's possible to be
able to create but not to delete a fifo. Ideally, support for unnamed pipes
should be added to debugserver as well, so we can avoid the `#ifdef` here.
Reviewers: clayborg, vharron, chying
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11609
llvm-svn: 243667
Summary:
This commit moves the m_spawned_pids member from the common LLGS/Platform class to the plaform
specific part. This enables us to remove LLGS code, which was attempting to manage the
m_spawned_pids contents, but at the same time making sure, there is only one debugged process. If
we ever want to do multi-process debugging, we will probably want to replace this with a set of
NativeProcessProtocolSP anyway. The only functional change is that support for
qKillSpawnedProcess packet is removed from LLGS, but this was not used there anyway (we have the
k packet for that).
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11557
llvm-svn: 243513
system, make a couple of additional checks to see if the
attach was denied via the System Integrity Protection that
is new in Mac OS X 10.11. If so, return a special E87
error code to indicate this to lldb.
Up in lldb, if we receive the E87 error code, be specific
about why the attach failed.
Also detect the more common case of general attach failure
and print a better error message than "lost connection".
I believe this code will all build on Mac OS X 10.10 systems.
It may not compile or run on earlier versions of the OS.
None of this should build on other non-darwin systems.
llvm-svn: 243511
The removal of in-process Linux debug support left a switch statement
with llvm::Triple::FreeBSD as the only case. Simplify by replacing it
with a now-equivalent assertion.
llvm-svn: 243468
As of r240543 ProcessPOSIX and POSIXThread are used only on FreeBSD, so
just roll them into ProcessFreeBSD and FreeBSDThread.
Differential Revision: http://reviews.llvm.org/D10698
llvm-svn: 243427
Summary:
Handle_k was printing an error when killing a process because KillSpawnedProcess was expecting to
be asynchronously notified of the process death, which no longer works, since we don't wait for
the process on a separate thread. However, the whole usage of KillSpawnedProcess is dubious here,
since it tries to be nice and terminate the process first with SIGTERM, which will not have the
intended effect on a ptraced process. I replace this code with a call to
NativeProcessProtocol::Kill, which does not suffer from these problems.
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11520
llvm-svn: 243397
SUMMARY:
This patch fixes couple of issues:
1. A thread tries to lock a mutex which is already locked.
2. Updating a thread list before the stop packet is parsed so that it can get a valid thread id and allows to set the stop info correctly.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, jaydeep, lldb-commits
Differential Revision: http://reviews.llvm.org/D11449
llvm-svn: 243091
Summary:
This replaces (void)x; usages where they x was subsequently
involved in an assertion with this macro to make the
intent more clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11451
llvm-svn: 243074
Summary:
GetLoadedModuleFileSpec was reading /proc/pid/maps character by character, which was very slow,
since we do that for every shared library, which android tends to have a lot. Switching to
ProcFileReader saves us about 0.4 seconds in attach time.
Reviewers: tberghammer
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: http://reviews.llvm.org/D11460
llvm-svn: 243019
Summary:
This adds support for jstopinfo field of stop-reply packets. This field enables us to avoid
querying full thread stop data on most stops (see r242593 for more details).
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11415
llvm-svn: 242997
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
This is a resubmission of r242305 after it was reverted due to bad interactions with the stdio
thread.
llvm-svn: 242783
Summary:
This commit removes the stdio forwarding thread in lldb-server in favor of a MainLoop callback.
As in some situations we need to forcibly flush the stream ( => Read() is called from multiple
places) and we still have multiple threads, I have had to additionally protect the communication
instance with a mutex.
Reviewers: ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11296
llvm-svn: 242782
Make sure we dont treat EINTR as a fatal error. I was getting this when trying to profile the
debugger. I'm not sure why this wasn't surfacing before, it could be that the profiler is using
some signals internally.
llvm-svn: 242681
Changed the "jthreads" key/value in the stop reply packets to be "jstopinfo". This JSON only contains threads with valid stop reasons and allows us not to have to ask about other threads via qThreadStopInfo when we are stepping. The "jstopinfo" only gets sent if there are more than one thread since the stop reply packet contains all the info needed for a single thread.
Added a Process::WillPublicStop() in case process subclasses want to do any extra gathering for public stops. For ProcessGDBRemote, we end up sending a jThreadsInfo packet to gather all expedited registers, expedited memory and MacOSX queue information. We only do this for public stops to minimize the packets we send when we have multiple private stops. Multiple private stops happen when a source level single step, step into or step out run the process multiple times while implementing the stepping, and none of these private stops make it out to the UI via notifications because they are private stops.
llvm-svn: 242593
Summary:
It seems that reading of register data is the biggest bottleneck in LLGS at the moment. Sending
four registers instead of the full GPR set increases the jThreadsInfo processing time about
6-fold. Until we figure out where is this time going, this commit limits the amount of data we
send to provide a more fluid debugging experience.
Reviewers: tberghammer, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11264
llvm-svn: 242517
Summary:
This commit adds initial support for the jThreadsInfo packet to lldb-server. The current
implementation does not expedite inferior memory. I have also added a description of the new
packet to our protocol documentation (mostly taken from Greg's earlier commit message).
Reviewers: clayborg, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11187
llvm-svn: 242402
This allows stepping operations that don't ever do a public stop to get all the info they need without having to send a jThreadsInfo packet since those tend to be large.
This patch will be followed by a patch that will detect when we do a public stop, and when that happens we will send a jThreadsInfo packet at that time to get all expedited registers and memory.
llvm-svn: 242352
This one I accidentally missed last time because I confused it with
the lldbUtility library. After this, all makefile libraries should
have the same names as their CMake counterparts.
llvm-svn: 242344
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
llvm-svn: 242305
should send when detaching and leaving the remote process/system
halted. Previously only the 'D' initial char was sent, which
resumed the process like a normal detach.
llvm-svn: 242256
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Summary:
This is the first part of our effort to make llgs single threaded. Currently, llgs consists of
about three threads and the synchronisation between them is a major source of latency when
debugging linux and android applications.
In order to be able to go single threaded, we must have the ability to listen for events from
multiple sources (primarily, client commands coming over the network and debug events from the
inferior) and perform necessary actions. For this reason I introduce the concept of a MainLoop.
A main loop has the ability to register callback's which will be invoked upon receipt of certain
events. MainLoopPosix has the ability to listen for file descriptors and signals.
For the moment, I have merely made the GDBRemoteCommunicationServerLLGS class use MainLoop
instead of waiting on the network socket directly, but the other threads still remain. In the
followup patches I indend to migrate NativeProcessLinux to this class and remove the remaining
threads.
Reviewers: ovyalov, clayborg, amccarth, zturner, emaste
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11066
llvm-svn: 242018
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
Summary:
32-bit signed return value from ptrace got sign extended when being converted to
64-bit unsigned.
Also, replaced tabs with spaces in the source.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11047
llvm-svn: 241837
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
This is a resubmit of r241672, after it was reverted due to build failueres on non-linux
platforms.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241796
Summary:
This is used on non-unix platforms, where qXfer:libraries-svr4:read
doesn't make sense. Windows uses that for instance.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11036
llvm-svn: 241712
Summary:
This commit moves the Windows DyanamicLoader to the common DynamicLoader
directory. This is required to remote debug Windows targets.
This commit also initializes the Windows DYLD plugin in
SystemInitializerCommon (similarly to both POSIX and MacOSX DYLD
plugins) so that we can automatically instantiate this class when
connected to a windows process.
Test Plan: Build.
Reviewers: zturner
Subscribers: lldb-commits, abdulras
Differential Revision: http://reviews.llvm.org/D10882
llvm-svn: 241697
platform-specific symbols that are not implemented on OS X.
The build error that caused this is
Undefined symbols for architecture x86_64:
"lldb_private::NativeProcessProtocol::Attach(unsigned long long, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::AttachToProcess(unsigned long long) in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
"lldb_private::NativeProcessProtocol::Launch(lldb_private::ProcessLaunchInfo&, lldb_private::NativeProcessProtocol::NativeDelegate&, std::__1::shared_ptr<lldb_private::NativeProcessProtocol>&)", referenced from:
lldb_private::process_gdb_remote::GDBRemoteCommunicationServerLLGS::LaunchProcess() in liblldb-core.a(GDBRemoteCommunicationServerLLGS.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
llvm-svn: 241688
Summary:
This commit avoids the Platform instance when spawning or attaching to a process in lldb-server.
Instead, I have the server call a (static) method of NativeProcessProtocol directly. The reason
for this is that I believe that NativeProcessProtocol should be decoupled from the Platform
(after all, it always knows which platform it is running on, unlike the rest of lldb).
Additionally, the kind of platform actions a NativeProcessProtocol instance is likely to differ
greatly from the platform actions of the lldb client, so I think the separation makes sense.
After this, the only dependency NativeProcessLinux has on PlatformLinux is the ResolveExecutable
method, which needs additional refactoring.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10996
llvm-svn: 241672
This can be in the cpp file rather than the header file, so moving
it there.
Summary: Move ProcessKDP's StringExtractor include.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11018
llvm-svn: 241649
Summary:
Fix StringExtractor.h issues.
* source/Plugins/Process/MacOSX-Kernel/ProcessKDP.cpp
(#include "Utility/StringExtractor.h): Not needed, this is already
included by ProcessKDP.h
* unittests/Utility/StringExtractorTest.cpp
(#include "Utility/StringExtractor.h): Update include path to the
new location.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10995
llvm-svn: 241596
Previously we accepted a frame as correct result if the PC pointed
into an executable section of code. The isse with that approac is
that if we calculated PC correctly but messed up the value of CFA
then unwinding from the next fram will most likely fail.
With this change I modify the logic with keeping the requirement
for PC to point to an executable section and also check that we can
continue the unwind from the frame we calculated. If continuing from
the frame calculated with the primary unwind plan isn't working then
fall back to the fallback plan with the hope for a better frame (if
the fallback plan won't help then we acceot the frame from the
primary plan).
Differential revision: http://reviews.llvm.org/D10932
llvm-svn: 241434
Previously if the instruction emulation based unwind plan failed then
we fall back to the arch default unwind plan. Change it to fall back
to the eh_frame based one even on non call sites if we have eh_frame
as that one tend to be more reliable.
Differential revision: http://reviews.llvm.org/D10902
llvm-svn: 241334
Summary:
This changes PtraceWrapper to return an Error, while the actual result is in an pointer parameter
(instead of the other way around). Also made a couple of PtraceWrapper arguments default to zero.
This arrangement makes a lot of the code much simpler.
Test Plan: Tests pass on linux. It compiles on android arm64/mips64.
Reviewers: chaoren, mohit.bhakkad
Subscribers: tberghammer, aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D10808
llvm-svn: 241079
Make the python target definition file have highest priority so that we can set
the remote stub breakpoint pc offset using it.
Reviewers: clayborg
Subscribers: ted, deepak2427, lldb-commits
Differential revision: http://reviews.llvm.org/D10775
llvm-svn: 241063
- Avoid sending the qfThreadInfo, qsThreadInfo packets if we have a stop reply packet with the threads already (save 2 round trip packets)
- Include the qname, qserial and qkind in the JSON info
- Report the qname, qserial and qkind to the thread so it can cache it to avoid many packets on MacOSX and iOS
- Don't clear all discoverable settings when we exec, just the ones we need to saves 1-5 packets for each exec.
llvm-svn: 240988
Summary:
This removes a lot of boilerplate, which was needed to execute monitor operations. Previously one
needed do declare a separate class for each operation which would manually capture all needed
arguments, which was very verbose. In addition to less code, I believe this also makes the code
more readable, since now the implementation of the operation can be physically closer to the code
that invokes it.
Test Plan: Code compiles on x86, arm and mips, tests pass on x86 linux.
Reviewers: tberghammer, chaoren
Subscribers: aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D10694
llvm-svn: 240772
There are a couple of bugs in the XML register info handling which this patch fixes:
+ conflicting variable names in lambda, both capture list and parameters contains a variable called 'name'.
+ prev_reg_num, which sets the register number, should be incremented after each register is processed.
+ Windows errors regarding empty strings and the 'xi:' prefix disappearing from 'xi:include' node name.
Reviewers: clayborg
Subscribers: lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D10731
llvm-svn: 240768
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
The values of four important registers are included in logs for ptrace
PT_GETREGS. Put all four on the same line for a more compact log. Also
use the proper 64-bit register names.
llvm-svn: 240581
With the removal of ProcessLinux in r240543 this code is used only on
FreeBSD. FreeBSD isn't affected by whichever issue originally prompted
the addition of SetResumeState, so just remove it.
As discussed on the mailing list (and mentioned in a FIXME comment)
it shouldn't be called there.
llvm-svn: 240550
Summary:
Currently, the local-only path fails about 50% of the tests, which means that: a) nobody is using
it; and b) the remote debugging path is much more stable. This commit removes the local-only
linux debugging code (ProcessLinux) and makes remote-loopback the only way to debug local
applications (the same architecture as OSX). The ProcessPOSIX code is moved to the FreeBSD
directory, which is now the only user of this class. Hopefully, FreeBSD will soon move to the new
architecture as well and then this code can be removed completely.
Test Plan: Test suite passes via remote stub.
Reviewers: emaste, vharron, ovyalov, clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D10661
llvm-svn: 240543
* Add and fix the emulation of several instruction.
* Disable frame pointer usage on Android.
* Specify return address register for the unwind plan instead of explict
tracking the value of RA.
* Replace prologue detection heuristics (unreliable in several cases)
with a logic to follow the branch instructions and restore the CFI
value based on them. The target address for a branch should have the
same CFI as the source address (if they are in the same function).
* Handle symbols in ELF files where the symbol size is not specified
with calcualting their size based on the next symbol (already done
in MachO files).
* Fix architecture in FuncUnwinders with filling up the inforamtion
missing from the object file with the architecture of the target.
* Add code to read register wehn the value is set to "IsSame" as it
meanse the value of a register in the parent frame is the same as the
value in the current frame.
Differential revision: http://reviews.llvm.org/D10447
llvm-svn: 240533
A "qSymbol::" is sent when shared libraries have been loaded by hooking into the Process::ModulesDidLoad() function from within ProcessGDBRemote. This function was made virtual so that the ProcessGDBRemote version is called, which then first calls the Process::ModulesDidLoad(), and then it queries for any symbol lookups that the remote GDB server might want to do.
This allows debugserver to request the "dispatch_queue_offsets" symbol so that it can read the queue name, queue kind and queue serial number and include this data as part of the stop reply packet. Previously each thread would have to do 3 memory reads in order to read the queue name.
This is part of reducing the number of packets that are sent between LLDB and the remote GDB server.
<rdar://problem/21494354>
llvm-svn: 240466
This patch adds a listener to the AynscThread in ProcessGDBRemote, specifically for dealing with any async notification packets.
From the broadcast our listener receives we can process the notify packet from the event data. A handler function then sets the thread stop info from this packet, and updates lldb by setting the process private state to stopped. Allowing the async thread to go back to sleep and getting the main thread to handle the implications of a state change.
When sending a vCont in nonstop mode we also get a different reply from all-stop mode, an OK response as opposed to a stop reply. So a condition is added to handle this and set the process state without the stop-reply data.
Reviewers: clayborg
Subscribers: lldb-commits, labath, ted, aidan.dodds, deepak2427
Differential Revision: http://reviews.llvm.org/D10544
llvm-svn: 240397
SUMMARY:
This patch implements
1. Emulation of MIPS32 branch instructions
2. Enable single-stepping for MIPS32 instructions
3. Correction in emulation of MIPS64 branch instructions with delay slot
4. Adjust breakpoint address when breakpoint is hit in a forbidden slot of compact branch instruction
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, bhushan, lldb-commits, emaste, nitesh.jain
Differential Revision: http://reviews.llvm.org/D10596
llvm-svn: 240373
We have been working on reducing the packet count that is sent between LLDB and the debugserver on MacOSX and iOS. Our approach to this was to reduce the packets required when debugging multiple threads. We currently make one qThreadStopInfoXXXX call (where XXXX is the thread ID in hex) per thread except the thread that stopped with a stop reply packet. In order to implement multiple thread infos in a single reply, we need to use structured data, which means JSON. The new jThreadsInfo packet will attempt to retrieve all thread infos in a single packet. The data is very similar to the stop reply packets, but packaged in JSON and uses JSON arrays where applicable. The JSON output looks like:
[
{ "tid":1580681,
"metype":6,
"medata":[2,0],
"reason":"exception",
"qaddr":140735118423168,
"registers": {
"0":"8000000000000000",
"1":"0000000000000000",
"2":"20fabf5fff7f0000",
"3":"e8f8bf5fff7f0000",
"4":"0100000000000000",
"5":"d8f8bf5fff7f0000",
"6":"b0f8bf5fff7f0000",
"7":"20f4bf5fff7f0000",
"8":"8000000000000000",
"9":"61a8db78a61500db",
"10":"3200000000000000",
"11":"4602000000000000",
"12":"0000000000000000",
"13":"0000000000000000",
"14":"0000000000000000",
"15":"0000000000000000",
"16":"960b000001000000",
"17":"0202000000000000",
"18":"2b00000000000000",
"19":"0000000000000000",
"20":"0000000000000000"},
"memory":[
{"address":140734799804592,"bytes":"c8f8bf5fff7f0000c9a59e8cff7f0000"},
{"address":140734799804616,"bytes":"00000000000000000100000000000000"}
]
}
]
It contains an array of dicitionaries with all of the key value pairs that are normally in the stop reply packet. Including the expedited registers. Notice that is also contains expedited memory in the "memory" key. Any values in this memory will get included in a new L1 cache in lldb_private::Process where if a memory read request is made and that memory request fits into one of the L1 memory cache blocks, it will use that memory data. If a memory request fails in the L1 cache, it will fall back to the L2 cache which is the same block sized caching we were using before these changes. This allows a process to expedite memory that you are likely to use and it reduces packet count. On MacOSX with debugserver, we expedite the frame pointer backchain for a thread (up to 256 entries) by reading 2 pointers worth of bytes at the frame pointer (for the previous FP and PC), and follow the backchain. Most backtraces on MacOSX and iOS now don't require us to read any memory!
We will try these packets out and if successful, we should port these to lldb-server in the near future.
<rdar://problem/21494354>
llvm-svn: 240354
For some communication channels, sending large packets can be very
slow. In those cases, it may be faster to compress the contents of
the packet on the target device and decompress it on the debug host
system. For instance, communicating with a device using something
like Bluetooth may be an environment where this tradeoff is a good one.
This patch adds a new field to the response to the "qSupported" packet
(which returns a "qXfer:features:" response) -- SupportedCompressions
and DefaultCompressionMinSize. These tell you what the remote
stub can support.
lldb, if it wants to enable compression and can handle one of those
algorithms, it can send a QEnableCompression packet specifying the
algorithm and optionally the minimum packet size to use compression
on. lldb may have better knowledge about the best tradeoff for
a given communication channel.
I added support to debugserver an lldb to use the zlib APIs
(if -DHAVE_LIBZ=1 is in CFLAGS and -lz is in LDFLAGS) and the
libcompression APIs on Mac OS X 10.11 and later
(if -DHAVE_LIBCOMPRESSION=1). libz "zlib-deflate" compression.
libcompression can support deflate, lz4, lzma, and a proprietary
lzfse algorithm. libcompression has been hand-tuned for Apple
hardware so it should be preferred if available.
debugserver currently only adds the SupportedCompressions when
it is being run on an Apple watch (TARGET_OS_WATCH). Comment
that #if out from RNBRemote.cpp if you want to enable it to
see how it works. I haven't tested this on a native system
configuration but surely it will be slower to compress & decompress
the packets in a same-system debug session.
I haven't had a chance to add support for this to
GDBRemoteCommunciationServer.cpp yet.
<rdar://problem/21090180>
llvm-svn: 240066
Summary:
Memory reads using the ptrace API need to be executed on a designated thread
and in 4-byte increments. The process_vm_read syscall has no such requirements
and it is about 50 times faster. This patch makes lldb-server use the faster
API if the target kernel supports it. Kernel support for this feature is
determined at runtime. Using process_vm_writev in the same manner is more
complicated since this syscall (unlike ptrace) respects page protection settings
and so it cannot be used to set a breakpoint, since code pages are typically
read-only. However, memory writes are not currently a performance bottleneck as
they happen much more rarely.
Test Plan: all tests continue to pass
Reviewers: ovyalov, vharron
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10488
llvm-svn: 239924
In order to support asynchronous notifications for non-stop mode this patch adds a packet read thread. This is done by implementing AppendBytesToCache() from the communications class, which continually reads packets into a packet queue. To initialize this thread StartReadThread() must be called by the client, so since llgs and platform tools use the GBDRemoteCommunicatos code they must also call this function as well as ProcessGDBRemote.
When the read thread detects an async notify packet it broadcasts this event, where the matching listener will be added in the next non-stop patch.
Packets are now accessed by calling ReadPacket() which pops a packet from the queue, instead of using WaitForPacketWithTimeoutMicroSecondsNoLock()
Reviewers: vharron, clayborg
Subscribers: lldb-commits, labath, ted, domipheus, deepak2427
Differential Revision: http://reviews.llvm.org/D10085
llvm-svn: 239824
Summary:
This should solve the issue of sending denormalized paths over gdb-remote
if we stick to GetPath(false) in GDBRemoteCommunicationClient, and let the
server handle any denormalization.
Reviewers: ovyalov, zturner, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D9728
llvm-svn: 238604
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
Summary:
Previously, we reported inferior receiving SIGSEGV (or SIGILL, SIGFPE, SIGBUS) as an "exception"
to LLDB, presumably to match OSX behaviour. Beside the fact that we were basically lying to the
user, this was also causing problems with inferiors which handle SIGSEGV by themselves, since
LLDB was unable to reinject this signal back into the inferior.
This commit changes LLGS to report SIGSEGV as a signal. This has necessitated some changes in the
test-suite, which had previously used eStopReasonException to locate threads that crashed. Now it
uses platform-specific logic, which in the case of linux searches for eStopReasonSignaled with
signal=SIGSEGV.
I have also added the ability to set the description of StopInfoUnixSignal using the description
field of the gdb-remote packet. The linux stub uses this to display additional information about
the segfault (invalid address, address access protected, etc.).
Test Plan: All tests pass on linux and osx.
Reviewers: ovyalov, clayborg, emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D10057
llvm-svn: 238549
qEcho:%s
where '%s' is any valid string. The response to this packet is the exact packet itself with no changes, just reply with what you received!
This will help us to recover from packets timing out much more gracefully. Currently if a packet times out, LLDB quickly will hose up the debug session. For example, if we send a "abc" packet and we expect "ABC" back in response, but the "abc" command takes longer than the current timeout value this will happen:
--> "abc"
<-- <<<error: timeout>>>
Now we want to send "def" and get "DEF" back:
--> "def"
<-- "ABC"
We got the wrong response for the "def" packet because we didn't sync up with the server to clear any current responses from previously issues commands.
The fix is to modify GDBRemoteCommunication::WaitForPacketWithTimeoutMicroSecondsNoLock() so that when it gets a timeout, it syncs itself up with the client by sending a "qEcho:%u" where %u is an increasing integer, one for each time we timeout. We then wait for 3 timeout periods to sync back up. So the above "abc" session would look like:
--> "abc"
<-- <<<error: timeout>>> 1 second
--> "qEcho:1"
<-- <<<error: timeout>>> 1 second
<-- <<<error: timeout>>> 1 second
<-- "abc"
<-- "qEcho:1"
The first timeout is from trying to get the response, then we know we timed out and we send the "qEcho:1" packet and wait for 3 timeout periods to get back in sync knowing that we might actually get the response for the "abc" packet in the mean time...
In this case we would actually succeed in getting the response for "abc". But lets say the remote GDB server is deadlocked and will never response, it would look like:
--> "abc"
<-- <<<error: timeout>>> 1 second
--> "qEcho:1"
<-- <<<error: timeout>>> 1 second
<-- <<<error: timeout>>> 1 second
<-- <<<error: timeout>>> 1 second
We then disconnect and say we lost connection.
We might also have a bad GDB server that just dropped the "abc" packet on the floor. We can still recover in this case and it would look like:
--> "abc"
<-- <<<error: timeout>>> 1 second
--> "qEcho:1"
<-- "qEcho:1"
Then we know our remote GDB server is still alive and well, and it just dropped the "abc" response on the floor and we can continue to debug.
<rdar://problem/21082939>
llvm-svn: 238530
Summary:
Previously, we wait()ed for events from the inferiors process group. This is resulted in a
failure if the inferior changed its process group in the middle of execution. To avoid this, I
pass -1 to the wait() call. The flag __WNOTHREAD makes sure we don't actually wait for events
from any process, but only the processes(threads) which are our children (or traced by us). Since
this happens on the monitor thread, which is dedicated to monitoring a single inferior, we will
be getting events only from this inferior.
Test Plan: All tests pass on linux. I have added a test to check the new functionality.
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10061
llvm-svn: 238405
In ProcessGDBRemote we currently have a single packet, m_last_stop_packet, used to set the thread stop info.
However in non-stop mode we can receive several stop reply packets in a sequence for different threads. As a result we need to use a container to hold them before they are processed.
This patch also changes the return type of CheckPacket() so we can detect async notification packets.
Reviewers: clayborg
Subscribers: labath, ted, deepak2427, lldb-commits
Differential Revision: http://reviews.llvm.org/D9853
llvm-svn: 238323
This change also get rid of an unused Debugger instance in
GDBRemoteCommunicationServerLLGS and the command interpreter from
lldb-platform what was used only for enabling logging.
Differential revision: http://reviews.llvm.org/D9876
llvm-svn: 238319
We know have on API we should use for all XML within LLDB in XML.h. This API will be easy back the XML parsing by different libraries in case libxml2 doesn't work on all platforms. It also allows the only place for #ifdef ...XML... to be in XML.h and XML.cpp. The API is designed so it will still compile with or without XML support and there is a static function "bool XMLDocument::XMLEnabled()" that can be called to see if XML is currently supported. All APIs will return errors, false, or nothing when XML isn't enabled.
Converted all locations that used XML over to using the host XML implementation.
Added target.xml support to debugserver. Extended the XML register format to work for LLDB by including extra attributes and elements where needed. This allows the target.xml to replace the qRegisterInfo packets and allows us to fetch all register info in a single packet.
<rdar://problem/21090173>
llvm-svn: 238224
This change reorganize the register read/write code inside lldb-server on Linux
with moving the architecture independent code into a new class called
NativeRegisterContextLinux and all of the architecture dependent code into the
appropriate NativeRegisterContextLinux_* class. As part of it the compilation of
the architecture specific register contexts are only compiled on the specific
architecture because they can't be used in other cases.
The purpose of this change is to remove a lot of duplicated code from the different
register contexts and to remove the architecture dependent codes from the global
NativeProcessLinux class.
Differential revision: http://reviews.llvm.org/D9935
llvm-svn: 238196
The main issue was the Communication::Disconnect() was calling its Connection::Disconnect() but this wouldn't release the pipes that the ConnectionFileDescriptor was using. We also have someone that is holding a strong reference to the Process so that when you re-run, target replaces its m_process_sp, but it doesn't get destructed because someone has a strong reference to it. I need to track that down. But, even if we have a strong reference to the a process that is outstanding, we need to call Process::Finalize() to have it release as much of its resources as possible to avoid memory bloat.
Removed the ProcessGDBRemote::SetExitStatus() override and replaced it with ProcessGDBRemote::DidExit().
Now we aren't leaking file descriptors and the stand alone test suite should run much better.
llvm-svn: 238089
Summary: This enables correct handling of real time signals by lldb.
Test Plan: Added a test that verifies handling of SIGRTMIN
Reviewers: tberghammer, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9911
llvm-svn: 238009
Summary:
Previously, NPL tried to reinject SIGSTOP into the inferior in an attempt to get the process to
start in the group-stop state. This was:
a) wrong (reinjection should be controlled by "process handle" lldb setting)
b) racy (it should use Resume for transparent resuming instead of RequestResume)
c) broken (llgs crashed on inferior SIGSTOP)
With this change, SIGSTOP is handled just like any other signal delivered to the inferior: we
stop all threads and report signal reception to lldb. SIGSTOP reinjection does not behave the
same way as it would outside the debugger, but simulating this is a hard problem and is not
normally necessary.
Test Plan: I have added a test which verifies we get SIGSTOP reports and we do not crash.
Reviewers: ovyalov, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9852
llvm-svn: 237880
Summary:
The test in TestPlatformCommand which runs "platform process list" has
been timing out for Android when running running dosep.py with
LLDB_TEST_THREADS=8. This patch increases the packet timeout to a large
value of 1min to accommodate the long time required for a response for
the qfProcessInfo packet on Android.
Test Plan: LLDB_TEST_THREADS=8 ./dosep.py on Android.
Reviewers: chaoren
Reviewed By: chaoren
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9866
llvm-svn: 237752
Summary:
There was an issue in NPL, where we attempted removal of temporary breakpoints (used to implement
software single stepping), while some threads of the process were running. This is a problem
since we currently always use the main thread's ID in the removal ptrace call. Therefore, if the
main thread was still running, the ptrace call would fail, and the software breakpoint would
remain, causing all kinds of problems. This change removes the breakpoints after all threads have
stopped. This fixes TestExitDuringStep on Android arm and can also potentially help in other
situations, as previously the breakpoint would not get removed if the thread stopped for another
reason.
Test Plan: TestExitDuringStep passes, other tests remain unchanged.
Reviewers: tberghammer
Subscribers: tberghammer, aemerson, lldb-commits
Differential Revision: http://reviews.llvm.org/D9792
llvm-svn: 237448
Summary:
This is the same issue as we had in D9145 for thread creation. Going through the full
ThreadDidStop/RequestResume cycle can cause a deferred notification to fire, which is not correct
when we are ignoring an event and resuming the thread. In this case it doesn't matter much since
the thread will die after that anyway, but for correctness, we should do the same thing here.
Also treating the SIGTRAP case the same way.
Test Plan: Tests continue to pass.
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9696
llvm-svn: 237445
r237411 exposed the following issue: ProcessGDBRemote used the description field in the
stop-reply to set the description of the StopInfo. In the case of watchpoints, the packet
description contains the raw address that got hit, which is not exactly the information we want
to display to the user as the stop info. Therefore, I have changed the code to use the packet
description only if the StopInfo does not already have a description. This makes the behavior
equivalent to the pre-r237411 behavior as then the SetDecription call got ignored for
watchpoints.
llvm-svn: 237436
Todd Fiala