Summary:
Per discussion in D28616, having two ways two request logging (log
enable lldb XXX verbose && log enable -v lldb XXX) is confusing. This
removes the first option and standardizes all code to use the second
one.
I've added a LLDB_LOGV macro as a shorthand for if(log &&
log->GetVerbose()) and switched most of the affected log statements to
use that (I've only left a couple of cases that were doing complex
computations in an if(log) block).
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29510
llvm-svn: 294113
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary:
This patch adds accurate dependency specifications to the mail LLDB libraries and tools.
In all cases except lldb-server, these dependencies are added in addition to existing dependencies (making this low risk), and I performed some code cleanup along the way.
For lldb-server I've cleaned up the LLVM dependencies down to just the minimum actually required. This is more than lldb-server actually directly references, and I've left a todo in the code to clean that up.
Reviewers: labath, zturner
Subscribers: lldb-commits, danalbert, srhines, ki.stfu, mgorny, jgosnell
Differential Revision: https://reviews.llvm.org/D29333
llvm-svn: 293686
Summary:
getcwd() is not available (well.. um.. deprecated?) on windows, and the way
PosixApi.h is providing it causes strange compile errors when it's included in
the wrong order. The best way to avoid that is to just not use chdir.
This replaces all uses of getcwd in generic code. There are still a couple of
more uses, but these are in platform-specific code.
chdir() is causing a similar problem, but for that there is no llvm equivalent
for that (yet).
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28858
llvm-svn: 292795
Also found/fixed one bug identified by this warning in
RenderScriptx86ABIFixups.cpp where a string literal was being used in an
effort to provide a name for an instruction/register, but was instead
being passed as the bool 'isVolatile' parameter.
llvm-svn: 291198
Fixed by additional completed plans detection, and applying them on breakpoint condition fail.
Thread::GetStopInfo reworked. New test added.
Review https://reviews.llvm.org/D26497
Many thanks to Jim
llvm-svn: 290168
This adds formatv-backed formatting functions in various
places in LLDB such as StreamString, logging, constructing
error messages, etc. A couple of callsites are changed
from Printf style syntax to formatv style syntax to
illustrate its usage. Additionally, a FileSpec formatter
is introduced so that FileSpecs can be formatted natively.
Differential Revision: https://reviews.llvm.org/D27632
llvm-svn: 289922
where we would insert a breakpoint into a system library
but never remove it, so the second time we ran the binary
there would be two breakpoints and the debugger would
stop there.
<rdar://problem/29654974>
llvm-svn: 289913
Summary: I was building lldb using cross mingw-w64 toolchain on Linux and observed some issues. This is first patch in the series to fix that build. It mostly corrects the case of include files and adjusts some #ifdefs from _MSC_VER to _WIN32 and vice versa. I built lldb on windows with VS after applying this patch to make sure it does not break the build there.
Reviewers: zturner, labath, abidh
Subscribers: ki.stfu, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D27759
llvm-svn: 289821
ThreadList had an assignment operator that didn't lock the "rhs" thread list object. This means a thread list can be mutated while it is being copied.
The copy constructor calls the assignment operator as well. So this fixes the unsafe threaded access to ThreadList which we believe is responsible for a lot of crashes.
<rdar://problem/28075793>
llvm-svn: 289100
to not be set by Process::WillPublicStop() so the driver won't get
access to them. The fix is straightforward, moving the call to
WillPublicStop above the early return for the interrupt case. (the
interrupt case does an early return because the rest of the function
is concerned with running stop hooks etc and those are not applicable
when we've interrupted the process).
Also added a test case for it. The test case is a little complicated
because I needed to drive lldb asynchronously to give the program
a chance to get up and running before I interrupt it. Running to
a breakpoint was not sufficient to catch this bug.
<rdar://problem/22693778>
llvm-svn: 289026
Summary:
Since the function is way too big already, I tried at least to factor out the
timeout computation stuff into a separate function. I've tried to make the new
code semantically equivalent, and it also makes sense when I look at it as a done
deal.
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D27258
llvm-svn: 288326
This changes most of the class to use the new Timeout class. The one function
left is RunThreadPlan, which I left for a separate change as the function is
massive. A couple of things to call out:
- I've renamed the affected functions to match the listener interface names. This
should also help catch any places I did not convert at compile time.
- I've deleted the WaitForState function as it was unused.
llvm-svn: 288241
Summary:
Communication classes use the Timeout<> class to specify the timeout. Listener
class was converted to chrono some time ago, but it used a different meaning for
a timeout of zero (Listener: infinite wait, Communication: no wait). Instead,
Listener provided separate functions which performed a non-blocking event read.
This converts the Listener class to the new Timeout class, to improve
consistency. It also allows us to get merge the different GetNextEvent*** and
WaitForEvent*** functions into one. No functional change intended.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D27136
llvm-svn: 288238
Summary:
Fix step-over when SymbolContext.function is missing and symbol is present.
With targets from our build configuration,
ThreadPlanStepOverRange::IsEquivalentContext fails to fire for relevant frames,
leading to ShouldStop() returning true prematurely.
The frame's SymbolContext, and m_addr_context have:
- comp_unit set and matching
- function = nullptr
- symbol set and matching (but this is never checked)
My naive guess is that the context should be equivalent in this case :-)
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26804
llvm-svn: 287274
This was a bit tricky, especially for things like
OptionValueArray and OptionValueDictionary since they do some
funky string parsing. Rather than try to re-write line-by-line
I tried to make the StringRef usage idiomatic, even though
it meant often re-writing from scratch large blocks of code
in a different way while keeping true to the original intent.
The finished code is a big improvement though, and often much
shorter than the original code. All tests and unit tests
pass on Windows and Linux.
llvm-svn: 287242
Also significantly reduced the indentation level by use of
early returns, and simplified some of the logic by using
StringRef functions such as consumeInteger() and getAsInteger()
instead of strtoll, etc.
llvm-svn: 287189
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
Implement the C++ type lookup support in terms of this general scavenger
The idea is that we may want other languages to do debug info based search (exclusively, or as an add-on to runtime/module based searching) and it makes sense to avoid duplicating this functionality
llvm-svn: 285727
This reverts commit r284795, as it breaks watchpoint handling on arm (and
presumable all architectures that report watchpoint hits without executing the
tripping instruction).
There seems to be something fundamentally wrong with this patch: it uses
process_sp->AddPreResumeAction to re-enable the watchpoint, but the whole point
of the step-over-watchpoint logic (which AFAIK is the only user of this class) is
to disable the watchpoint *after* we resume to do the single step.
I have no idea how to fix this except by reverting the offending patch.
llvm-svn: 284817
Also, watchpoint commands, like breakpoint commands, need to run in async mode.
This was causing intermittent failures in TestWatchpointCommandPython.py, which is now solid.
llvm-svn: 284795
Summary:
"Initialization of function-local statics is guaranteed to occur only once even when called from
multiple threads, and may be more efficient than the equivalent code using std::call_once."
<http://en.cppreference.com/w/cpp/thread/call_once>
I'd add that it's also more readable.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D17710
llvm-svn: 284601
which specifies a file path and UUID but not an architecture, open
the file at that path and try every one of the architectures in the
file to see if there is a UUID match. Currently we'll pick the
first slice of a multi-architecture file and return that as the
match, and when the UUID doesn't match because it's the wrong
architecture, we'll end up ignoring the file.
<rdar://problem/28487804>
llvm-svn: 283295
This allows debugging of the JIT and other analyses of the internals of the
expression parser. I've also added a testcase that verifies that the setting
works correctly when off and on.
llvm-svn: 282434
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
The switch coveres all possible values. If a new one is added in the
future the compiler will start warning, providing a notification that
the switch needs updating.
llvm-svn: 282111
This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
This patch also marks the const char* versions as =delete to prevent
their use. This has the potential to cause build breakages on some
platforms which I can't compile. I have tested on Windows, Linux,
and OSX. Best practices for fixing broken callsites are outlined in
Args.h in a comment above the deleted function declarations.
Eventually we can remove these =delete declarations, but for now they
are important to make sure that all implicit conversions from
const char * are manually audited to make sure that they do not invoke a
conversion from nullptr.
llvm-svn: 281919
Where possible, remove the const char* version. To keep the
risk and impact here minimal, I've only done the simplest
functions.
In the process, I found a few opportunities for adding some
unit tests, so I added those as well.
Tested on Windows, Linux, and OSX.
llvm-svn: 281799
Thanks to Zachary Turner for the suggestion. It's distasteful that the actual
type of the lambda can't be spelled out, but it should be evident from the
definition of the lambda body.
llvm-svn: 281536
Moved the guts of the code from CommandObjectBreakpoint to Target (should
have done it that way in the first place.) Added an SBBreakpointList class
so there's a way to specify which breakpoints to serialize and to report the
deserialized breakpoints.
<rdar://problem/12611863>
llvm-svn: 281520
Still to come:
1) SB API's
2) Testcases
3) Loose ends:
a) serialize Thread options
b) serialize Exception resolvers
4) "break list --file" should list breakpoints contained in a file and
"break read -f 1 3 5" should then read in only those breakpoints.
<rdar://problem/12611863>
llvm-svn: 281273
Summary:
It fixes the following compile warnings:
1. '0' flag ignored with precision and ‘%d’ gnu_printf format
2. enumeral and non-enumeral type in conditional expression
3. format ‘%d’ expects argument of type ‘int’, but argument 4 has type ...
4. enumeration value ‘...’ not handled in switch
5. cast from type ‘const uint64_t* {aka ...}’ to type ‘int64_t* {aka ...}’ casts away qualifiers
6. extra ‘;’
7. comparison between signed and unsigned integer expressions
8. variable ‘register_operand’ set but not used
9. control reaches end of non-void function
Reviewers: jingham, emaste, zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24331
llvm-svn: 281191
mode in lldb works. I've been discussing this with Jim Ingham,
Greg Clayton, and Kate Stone for the past week or two.
Previously lldb would print three source lines (centered on the
line table entry line for the current line) followed by the assembly.
It would print the context information (module`function + offset)
before those three lines of source.
Now lldb will print up to two lines before/after the line table
entry. It prints two '*' characters for the line table line to
make it clear what line is showing assembly. There is one line of
whitespace before/after the source lines so the separation between
source & assembly is clearer. I don't print the context line
(module`function + offset). I stop printing context lines if it's
a different line table entry, or if it's a source line I've already
printed as context to another source line. If I have two line table
entries one after another for the same source line (I get these often
with clang - with different column information in them), I only print
the source line once.
I'm also using the target.process.thread.step-avoid-regexp setting
(which keeps you from stepping into STL functions that have been inlined
into your own code) and avoid printing any source lines from functions
that match that regexp.
When lldb disassembles into a new function, it will try to find the
declaration line # for the function and print all of the source lines
between the decl and the first line table entry (usually a { curly brace)
so we have a good chance of including the arguments, at least with the
debug info emitted by clang.
Finally, the # of source lines of context to show has been separated
from whether we're doing mixed source & assembly or not. Previously
specifying 0 lines of context would turn off mixed source & assembly.
I think there's room for improvement, and maybe some bugs I haven't
found yet, but it's in good enough shape to upstream and iterate at
this point.
I'm not sure how best to indicate which source line is the actual line
table # versus context lines. I'm using '**' right now. Both Kate
and Greg had the initial idea to reuse '->' (normally used to indicate
"currently executing source line") - I tried it but I wasn't thrilled,
I'm too used to the established meaning of ->.
Greg had the interesting idea of avoiding context source lines only
in two line table entries in the same source file. So we'd print
two lines before & after a source line, and then the next line table
entry (if it was on the next source line after those two context lines)
we'd display only the following two lines -- the previous two had just
been printed. If an inline source line was printed between these two,
though, we'd print the context lines for both of them. It's an
interesting idea, and I want to see how it works with both -O0 and -O3
codegen where we have different amounts of inlining.
<rdar://problem/27961419>
llvm-svn: 280906
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
The commit introduced an array of const objects, which libstdc++ does not like. Make the object
non-const.
Also fix a compiler warning while I'm in there.
llvm-svn: 280697
When a process stops due to a crash, we get the crashing instruction and the
crashing memory location (if there is one). From the user's perspective it is
often unclear what the reason for the crash is in a symbolic sense.
To address this, I have added new fuctionality to StackFrame to parse the
disassembly and reconstruct the sequence of dereferneces and offsets that were
applied to a known variable (or fuction retrn value) to obtain the invalid
pointer.
This makes use of enhancements in the disassembler, as well as new information
provided by the DWARF expression infrastructure, and is exposed through a
"frame diagnose" command. It is also used to provide symbolic information, when
available, in the event of a crash.
The algorithm is very rudimentary, and it needs a bunch of work, including
- better parsing for assembly, preferably with help from LLVM
- support for non-Apple platforms
- cleanup of the algorithm core, preferably to make it all work in terms of
Operands instead of register/offset pairs
- improvement of the GetExpressioPath() logic to make prettier expression
paths, and
- better handling of vtables.
I welcome all suggestios, improvements, and testcases.
llvm-svn: 280692
This code represents the Week of Code work I did on bringing up
lldb-server LLGS support for Darwin. It does not include the
Xcode project changes needed, as we don't want to throw that switch
until more support is implemented (i.e. this change is inert, no
build systems use it yet. I've verified on Ubuntu 16.04, macOS
Xcode and macOS cmake builds).
This change does some minimal refactoring of code that is shared
with the Linux LLGS portion, moving it from NativeProcessLinux into
NativeProcessProtocol. That code is also used by NativeProcessDarwin.
Current state on Darwin:
* Process launching is implemented. (Attach is not).
Launching on devices has not yet been tested (FBS/BKS might
need a bit of work).
* Inferior waitpid monitoring and communication of exit status
via MainLoop callback is implemented.
* Memory read/write, breakpoints, thread register context, etc.
are not yet implemented. This impacts process stop/resume, as
the initial launch suspended immediately starts the process
up and running because it doesn't know it is supposed to remain
stopped.
* I implemented the equivalent of MachThreadList as
NativeThreadListDarwin, in anticipation that we might want to
factor out common parts into NativeThreadList{Protocol} and share
some code here. After writing it, though, the fallout from merging
Mach Task/Process into a single concept plus some other minor
changes makes the whole NativeThreadListDarwin concept nothing more
than dead weight. I am likely going to get rid of this class and
just manage it directly in NativeProcessDarwin, much like I did
for NativeProcessLinux.
* There is a stub-out call for starting a STDIO thread. That will
go away and adopt the MainLoop pselect-based IOObject reading.
I am developing the fully-integrated changes in the following repo,
which contains the necessary Xcode bits and the glue that enables
lldb-debugserver on a macOS system:
https://github.com/tfiala/lldb/tree/llgs-darwin
This change also breaks out a few of the lldb-server tests into
their own directory, and adds some $qHostInfo tests (not sure why
I didn't write those tests back when I initially implemented that
on the Linux side).
llvm-svn: 280604
When, for instance, "step-in" steps into a function that it doesn't want
to stop in (e.g. has no debug info) it will push a step-out plan to implement
the step out so it can then continue stepping. These step out's don't use
the result of the function stepped out of, so they shouldn't spend the time
to compute it.
llvm-svn: 279540
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.
This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.
Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham
llvm-svn: 278440
Factor out some common logic used to find the runtime library in a list
of modules.
Differential Revision: https://reviews.llvm.org/D23150
llvm-svn: 278368
Adapters for instrumentation runtimes have to do two basic things:
1) Load a runtime library.
2) Install breakpoints in that library.
This logic is duplicated in the adapters for asan and tsan. Factor it
out and document bits of it to make it easier to add new adapters.
I tested this with check-lldb, and double-checked
testcases/functionalities/{a,t}san.
Differential Revision: https://reviews.llvm.org/D23043
llvm-svn: 278367
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
frame to another was triggering an early stop when stepping back out to a
real frame. Check that we're doing this only for inlined frames.
<rdar://problem/26482931>
llvm-svn: 277185
The commit accidentally switched a timed wait on a condition variable into an infinite timeout.
Change that back. Android tests were timeing out without this.
llvm-svn: 277133
Pavel Labath