For non padded structs, we can just proceed and deaggregate them.
We don't want ot do this when there is padding in the struct as to not
lose information about this padding (the subsequents passes would then
try hard to preserve the padding, which is undesirable).
Also update extractvalue.ll and cast.ll so that they use structs with padding.
Remove the FIXME in the extractvalue of laod case as the non padded case is
handled when processing the load, and we don't want to do it on the padded
case.
Patch by: Amaury SECHET <deadalnix@gmail.com>
Differential Revision: http://reviews.llvm.org/D14483
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255600
Make sure to check that the destination type is sized.
A check was present but was incorrectly checking the source type
instead.
Patch by Amaury SECHET!
Differential Revision: http://reviews.llvm.org/D15264
llvm-svn: 255536
It turns out that terminatepad gives little benefit over a cleanuppad
which calls the termination function. This is not sufficient to
implement fully generic filters but MSVC doesn't support them which
makes terminatepad a little over-designed.
Depends on D15478.
Differential Revision: http://reviews.llvm.org/D15479
llvm-svn: 255522
While we have successfully implemented a funclet-oriented EH scheme on
top of LLVM IR, our scheme has some notable deficiencies:
- catchendpad and cleanupendpad are necessary in the current design
but they are difficult to explain to others, even to seasoned LLVM
experts.
- catchendpad and cleanupendpad are optimization barriers. They cannot
be split and force all potentially throwing call-sites to be invokes.
This has a noticable effect on the quality of our code generation.
- catchpad, while similar in some aspects to invoke, is fairly awkward.
It is unsplittable, starts a funclet, and has control flow to other
funclets.
- The nesting relationship between funclets is currently a property of
control flow edges. Because of this, we are forced to carefully
analyze the flow graph to see if there might potentially exist illegal
nesting among funclets. While we have logic to clone funclets when
they are illegally nested, it would be nicer if we had a
representation which forbade them upfront.
Let's clean this up a bit by doing the following:
- Instead, make catchpad more like cleanuppad and landingpad: no control
flow, just a bunch of simple operands; catchpad would be splittable.
- Introduce catchswitch, a control flow instruction designed to model
the constraints of funclet oriented EH.
- Make funclet scoping explicit by having funclet instructions consume
the token produced by the funclet which contains them.
- Remove catchendpad and cleanupendpad. Their presence can be inferred
implicitly using coloring information.
N.B. The state numbering code for the CLR has been updated but the
veracity of it's output cannot be spoken for. An expert should take a
look to make sure the results are reasonable.
Reviewers: rnk, JosephTremoulet, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D15139
llvm-svn: 255422
This change is discussed in D15392 and should allow us to effectively
revert:
http://llvm.org/viewvc/llvm-project?view=revision&revision=255261
if we canonicalize bitcasts ahead of extracts.
It should be safe to convert any pair of bitcasts into a single bitcast,
however, it was mentioned here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20110829/127089.html
that we're not allowed to bitcast from an x86_mmx to some other types, but I'm
not seeing any failures from that, and we have regression tests in CodeGen/X86
that appear to cover all of those cases.
Some day we'll get to remove that MMX wart from LLVM IR completely?
Differential Revision: http://reviews.llvm.org/D15468
llvm-svn: 255399
Avoid O(N^2) behaviour when checking for bad bitcasts in `ConstantExpr`s
buried inside of aggregate initializers to `GlobalVariable`s. I've:
- centralized the "visited" set for recursing through `ConstantExpr`s so
that expressions are only visited once per Verifier run,
- removed the duplicate logic for the stack visit, and
- avoided recursing into other `GlobalValue`s.
This recovers roughly a 100x time difference in clang compiles of a
particular input file (filled with large cross-referencing tables) that
depends on whether `-disable-llvm-verifier` is on. This slowdown was
caused by r187506, which introduced these checks.
Now, avoiding `-disable-llvm-verifier` only causes a 2x slowdown for
this case.
(Interestingly, dumping the textual IR for this file starts at least
50GB of global variable initializers (I don't know the total, since I
killed the dump)...)
llvm-svn: 255269
Introduced DIMacro and DIMacroFile debug info metadata in the LLVM IR to support macros.
Differential Revision: http://reviews.llvm.org/D14687
llvm-svn: 255245
- This simplifies the CallSite class, arg_begin / arg_end are now
simple wrapper getters.
- In several places, we were creating CallSite instances solely to call
arg_begin and arg_end. With this change, that's no longer required.
llvm-svn: 255226
The ConstantDataArray::getFP(LLVMContext &, ArrayRef<uint16_t>)
overload has had a typo in it since it was written, where it will
create a Vector instead of an Array. This obviously doesn't work at
all, but it turns out that until r254991 there weren't actually any
callers of this overload. Fix the typo and add some test coverage.
llvm-svn: 255157
This new patch fixes a few bugs that exposed in last submit. It also improves
the test cases.
--Original Commit Message--
This patch implements a minimum spanning tree (MST) based instrumentation for
PGO. The use of MST guarantees minimum number of CFG edges getting
instrumented. An addition optimization is to instrument the less executed
edges to further reduce the instrumentation overhead. The patch contains both the
instrumentation and the use of the profile to set the branch weights.
Differential Revision: http://reviews.llvm.org/D12781
llvm-svn: 255132
Test case attached (test case also checks that we don't drop the calling
convention, but that functionality was correct before this patch).
llvm-svn: 255088
Currently, vectors of halfs end up as ConstantVectors, but there isn't
a good reason they can't be ConstantDataVectors. This should save some
memory.
llvm-svn: 254991
254950 ended up being not NFC. The previous code was overriding the flags for whether an instruction read or wrote memory using the target specific flags returned via TTI. I'd missed this in my refactoring. Since I mistakenly built only x86 and didn't notice the number of unsupported tests, I didn't catch that before the original checkin.
This raises an interesting issue though. Given we have function attributes (i.e. readonly, readnone, argmemonly) which describe the aliasing of intrinsics, why does TTI have this information overriding the instruction definition at all? I see no reason for this, but decided to preserve existing behavior for the moment. The root issue might be that we don't have a "writeonly" attribute.
Original commit message:
[EarlyCSE] Simplify and invert ParseMemoryInst [NFCI]
Restructure ParseMemoryInst - which was introduced to abstract over target specific load and stores instructions - to just query the underlying instructions. In theory, this could be slightly slower than caching the results, but in practice, it's very unlikely to be measurable.
The simple query scheme makes it far easier to understand, and much easier to extend with new queries. Given I'm about to need to add new query types, doing the cleanup first seemed worthwhile.
Do we still believe the target specific intrinsic handling is worthwhile in EarlyCSE? It adds quite a bit of complexity and makes the code harder to read. Being able to delete the abstraction entirely would be wonderful.
llvm-svn: 254957
Summary:
We are inserting both Scope and SP into the Seen map and check whether
it was already there in which case we skip the validation (the idea
being that we already checked this Subprogram before). However,
if (Scope == SP) as MDNodes, then inserting the Scope, will trigger
the Seen check causing us to incorrectly not validate this !dbg
attachment. Fix this by not performing the SP Seen check if Scope == SP
Reviewers: pcc, dexonsmith, dblaikie
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14697
llvm-svn: 254887
In 254760, I introduced the usage of a BumpPtrAllocator for the AnalysisUsage instances held by the PassManger. This turns out to have been incorrect since a BumpPtrAllocator does not run the destructors of objects when deallocating memory. Since a few of our SmallVector's had grown beyond their small size, we end up with some leaked memory. We need to use a SpecificBumpPtrAllocator instead.
llvm-svn: 254803
Currently `OperandBundleUse::operandsHaveAttr` computes its result
without being given a specific operand. This is problematic because it
forces us to say that, e.g., even non-pointer operands in `"deopt"`
operand bundles are `readonly`, which doesn't make sense.
This commit changes `operandsHaveAttr` to work in the context of a
specific operand, so that we can give the operand attributes that make
sense for the operands's `llvm::Type`.
llvm-svn: 254764
The LegacyPassManager was storing an instance of AnalysisUsage for each instance of each pass. In practice, most instances of a single pass class share the same dependencies. We can't rely on this because passes can (and some do) have dynamic dependencies based on instance options.
We can exploit the likely commonality by uniqueing the usage information after querying the pass, but before storing it into the pass manager. This greatly reduces memory consumption by the AnalysisUsage objects. For a long pass pipeline, I measured a decrease in memory consumption for this storage of about 50%. I have not measured on the default O3 pipeline, but I suspect it will see some benefit as well since many passes are repeated (e.g. InstCombine).
Differential Revision: http://reviews.llvm.org/D14677
llvm-svn: 254760
This commit adds a new target-independent calling convention for C++ TLS
access functions. It aims to minimize overhead in the caller by perserving as
many registers as possible.
The target-specific implementation for X86-64 is defined as following:
Arguments are passed as for the default C calling convention
The same applies for the return value(s)
The callee preserves all GPRs - except RAX and RDI
The access function makes C-style TLS function calls in the entry and exit
block, C-style TLS functions save a lot more registers than normal calls.
The added calling convention ties into the existing implementation of the
C-style TLS functions, so we can't simply use existing calling conventions
such as preserve_mostcc.
rdar://9001553
llvm-svn: 254737
This provides interface to get and set maximum function counts to Module. This
would allow things like determination of function hotness. The actual setting
of this max function count will have to be done in the frontend.
Differential Revision: http://reviews.llvm.org/D15003
llvm-svn: 254647
time.
The new overloaded function is used when an attribute is added to a
large number of slots of an AttributeSet (for example, to function
parameters). This is much faster than calling AttributeSet::addAttribute
once per slot, because AttributeSet::getImpl (which calls
FoldingSet::FIndNodeOrInsertPos) is called only once per function
instead of once per slot.
With this commit, clang compiles a file which used to take over 22
minutes in just 13 seconds.
rdar://problem/23581000
Differential Revision: http://reviews.llvm.org/D15085
llvm-svn: 254491
ConstantDataArray::getImpl and ConstantDataVector::getImpl had a lot
of copy pasta in how they handled sequences of constants. Break that
out into a couple of simple functions.
llvm-svn: 254456
By including the module name in the error message.
This makes the error message much more useful and
saves a trip to the debugger.
Reviewers: dexonsmith
Subscribers: dexonsmith, llvm-commits
Differential Revision: http://reviews.llvm.org/D14473
llvm-svn: 254437
They are as much trouble as aliases to declarations. They are requiring
the code generator to define a symbol with the same value as another
symbol, but the second symbol is undefined.
If representing this is important for some optimization, we could add
support for available_externally aliases. They would be *required* to
point to a declaration (or available_externally definition).
llvm-svn: 254170
This patch implements a minimum spanning tree (MST) based instrumentation for
PGO. The use of MST guarantees minimum number of CFG edges getting
instrumented. An addition optimization is to instrument the less executed
edges to further reduce the instrumentation overhead. The patch contains both the
instrumentation and the use of the profile to set the branch weights.
Differential Revision: http://reviews.llvm.org/D12781
llvm-svn: 254021
We had two code paths. One would create names like "foo.1" and the other
names like "foo1".
For globals it is important to use "foo.1" to help C++ name demangling.
For locals there is no strong reason to go one way or the other so I
kept the most common mangling (foo1).
llvm-svn: 253804
Summary:
Several fixes to the handling of bitcode files without function summary
sections so that they are skipped during ThinLTO processing in llvm-lto
and the gold plugin when appropriate instead of aborting.
1 Don't assert when trying to add a FunctionInfo that doesn't have
a summary attached.
2 Skip FunctionInfo structures that don't have attached function summary
sections when trying to create the combined function summary.
3 In both llvm-lto and gold-plugin, check whether a bitcode file has
a function summary section before trying to parse the index, and skip
the bitcode file if it does not.
4 Fix hasFunctionSummaryInMemBuffer in BitcodeReader, which had a bug
where we returned to early while looking for the summary section.
Also added llvm-lto and gold-plugin based tests for cases where we
don't have function summaries in the bitcode file. I verified that
either the first couple fixes described above are enough to avoid the
crashes, or fixes 1,3,4. But have combined them all here for added
robustness.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14903
llvm-svn: 253796
Terrifyingly, one of them is a mishandling of floating point vectors
in Constant::isZero(). How exactly this issue survived this long
is beyond me.
llvm-svn: 253655
The masked intrinsics support all integer and floating point data types. I added the pointer type to this list.
Added tests for CodeGen and for Loop Vectorizer.
Updated the Language Reference.
Differential Revision: http://reviews.llvm.org/D14150
llvm-svn: 253544
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
Summary:
This change teaches LLVM's inliner to track and suitably adjust
deoptimization state (tracked via deoptimization operand bundles) as it
inlines through call sites. The operation is described in more detail
in the LangRef changes.
Reviewers: reames, majnemer, chandlerc, dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14552
llvm-svn: 253438
The way prelink used to work was
* The compiler decides if a given section only has relocations that
are know to point to the same DSO. If so, it names it
.data.rel.ro.local<something>.
* The static linker puts all of these together.
* The prelinker program assigns addresses to each library and resolves
the local relocations.
There are many problems with this:
* It is incompatible with address space randomization.
* The information passed by the compiler is redundant. The linker
knows if a given relocation is in the same DSO or not. If could sort
by that if so desired.
* There are newer ways of speeding up DSO (gnu hash for example).
* Even if we want to implement this again in the compiler, the previous
implementation is pretty broken. It talks about relocations that are
"resolved by the static linker". If they are resolved, there are none
left for the prelinker. What one needs to track is if an expression
will require only dynamic relocations that point to the same DSO.
At this point it looks like the prelinker is an historical curiosity.
For example, fedora has retired it because it failed to build for two
releases
(http://pkgs.fedoraproject.org/cgit/prelink.git/commit/?id=eb43100a8331d91c801ee3dcdb0a0bb9babfdc1f)
This patch removes support for it. That is, it stops printing the
".local" sections.
llvm-svn: 253280
Summary: Since we're passing references to dbg.value as pointers,
we need to have the frontend properly declare their sizes and
alignments (as it already does for regular pointers) in preparation
for my upcoming patch to have the verifer check that the sizes agree.
Also augment the backend logic that skips actually emitting this
information into DWARF such that it also handles reference types.
Reviewers: aprantl, dexonsmith, dblaikie
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14275
llvm-svn: 253186
Summary: The Old personality function gets copied over, but the
Materializer didn't have a chance to inspect it (e.g. to fix up
references to the correct module for the target function).
Also add a verifier check that makes sure the personality routine
is in the same module as the function whose personality it is.
Reviewers: majnemer
Subscribers: jevinskie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14474
llvm-svn: 253183
This reapplies r252949. I've changed the type of FuncName to be
std::string instead of StringRef in emitFnAttrCompatCheck.
Original commit message for r252949:
Provide a way to specify inliner's attribute compatibility and merging
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252990
rules using table-gen. NFC.
This commit adds new classes CompatRule and MergeRule to Attributes.td,
which are used to generate code to check attribute compatibility and
merge attributes of the caller and callee.
rdar://problem/19836465
llvm-svn: 252949
When working with tokens, it is often the case that one has instructions
which consume a token and produce a new token. Currently, we have no
mechanism to represent an initial token state.
Instead, we can create a notional "empty token" by inventing a new
constant which captures the semantics we would like. This new constant
is called ConstantTokenNone and is written textually as "token none".
Differential Revision: http://reviews.llvm.org/D14581
llvm-svn: 252811
Summary:
This change introduces the notion of "deoptimization" operand bundles.
LLVM can recognize and optimize these in more precise ways than it can a
generic "unknown" operand bundles.
The current form of this special recognition / optimization is an enum
entry in LLVMContext, a LangRef blurb and a verifier rule. Over time we
will teach LLVM to do more aggressive optimization around deoptimization
operand bundles, exploiting known facts about kinds of state
deoptimization operand bundles are allowed to track.
Reviewers: reames, majnemer, chandlerc, dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14551
llvm-svn: 252806
This is a step towards consolidating some of the information regarding
attributes in a single place.
This patch moves the enum attributes in Attributes.h to the table-gen
file. Additionally, it adds definitions of target independent string
attributes that will be used in follow-up commits by the inliner to
check attribute compatibility.
rdar://problem/19836465
llvm-svn: 252796
This was an omission in the patch that landed initial support for
operand bundles. So far we haven't hit this, but we will once the
inliner is able to inline calls to functions that contain calls with
operand bundles.
llvm-svn: 252645
This marker prevents optimization passes from adding 'tail' or
'musttail' markers to a call. Is is used to prevent tail call
optimization from being performed on the call.
rdar://problem/22667622
Differential Revision: http://reviews.llvm.org/D12923
llvm-svn: 252368
This attribute allows the compiler to assume that the function never recurses into itself, either directly or indirectly (transitively). This can be used among other things to demote global variables to locals.
llvm-svn: 252282
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
llvm-svn: 252219
Summary:
Data operands of a call or invoke consist of the call arguments, and
the bundle operands associated with the `call` (or `invoke`)
instruction. The motivation for this change is that we'd like to be
able to query "argument attributes" like `readonly` and `nocapture`
for bundle operands naturally.
This change also provides a conservative "implementation" for these
attributes for any bundle operand, and an extension point for future
work.
Reviewers: chandlerc, majnemer, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14305
llvm-svn: 252077
Summary:
This is intended to make a later change simpler.
Note: adding this bounds checking required fixing `X86FastISel`. As
far I can tell I've preserved original behavior but a careful review
will be appreciated.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14304
llvm-svn: 252073
XOP has the VPCMOV instruction that performs the common vector bit select operation OR( AND( SRC1, SRC3 ), AND( SRC2, ~SRC3 ) )
This patch adds tablegen pattern matching for this instruction.
Differential Revision: http://reviews.llvm.org/D8841
llvm-svn: 251975
Summary:
An unsigned comparision is equivalent to is corresponding signed version
if both the operands being compared are positive. Teach SCEV to use
this fact when profitable.
Reviewers: atrick, hfinkel, reames, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13687
llvm-svn: 251051
Summary: This will be used in a future change to ScalarEvolution.
Reviewers: hfinkel, reames, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13612
llvm-svn: 250975
Summary:
This makes attribute accessors on `CallInst` and `InvokeInst` do the
(conservatively) right thing. This essentially involves, in some
cases, *not* falling back querying the attributes on the called
`llvm::Function` when operand bundles are present.
Attributes locally present on the `CallInst` or `InvokeInst` will still
override operand bundle semantics. The LangRef has been amended to
reflect this. Note: this change does not do anything prevent
`-function-attrs` from inferring `CallSite` local attributes after
inspecting the called function -- that will be done as a separate
change.
I've used `-adce` and `-early-cse` to test these changes. There is
nothing special about these passes (and they did not require any
changes) except that they seemed be the easiest way to write the tests.
This change does not add deal with `argmemonly`. That's a later change
because alias analysis requires a related fix before `argmemonly` can be
tested.
Reviewers: reames, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13961
llvm-svn: 250973
Stop converting implicitly between iterators and pointers/references in
lib/IR. For convenience, I've added a `getIterator()` accessor to
`ilist_node` so that callers don't need to know how to spell the
iterator class (i.e., they can use `X.getIterator()` instead of
`Function::iterator(X)`).
I'll eventually disallow these implicit conversions entirely, but
there's a lot of code, so it doesn't make sense to do it all in one
patch. One library or so at a time.
Why? To root out cases of `getNextNode()` and `getPrevNode()` being
used in iterator logic. The design of `ilist` makes that invalid when
the current node could be at the back of the list, but it happens to
"work" right now because of a bug where those functions never return
`nullptr` if you're using a half-node sentinel. Before I can fix the
function, I have to remove uses of it that rely on it misbehaving.
(Maybe the function should just be deleted anyway? But I don't want
deleting it -- potentially a huge project -- to block fixing
ilist/iplist.)
llvm-svn: 249782
This is to enable me to address review for D13491 -- `Flags` is a
bitfield of `StatepointFlags`, not an individual item out of the enum,
so it should be represented as an `uint32_t`.
llvm-svn: 249778
Create `SymbolTableList`, a wrapper around `iplist` for lists that
automatically manage a symbol table. This commit reduces a ton of code
duplication between the six traits classes that were used previously.
As a drive by, reduce the number of template parameters from 2 to 1 by
using a SymbolTableListParentType metafunction (I originally had this as
a separate commit, but it touched most of the same lines so I squashed
them).
I'm in the process of trying to remove the UB in `createSentinel()` (see
the FIXMEs I added for `ilist_embedded_sentinel_traits` and
`ilist_half_embedded_sentinel_traits`). My eventual goal is to separate
the list logic into a base class layer that knows nothing about (and
isn't templated on) the downcasted nodes -- removing the need to invoke
UB -- but for now I'm just trying to get a handle on all the current use
cases (and cleaning things up as I see them).
Besides these six SymbolTable lists, there are two others that use the
addNode/removeNode/transferNodes() hooks: the `MachineInstruction` and
`MachineBasicBlock` lists. Ideally there'll be a way to factor these
hooks out of the low-level API entirely, but I'm not quite there yet.
llvm-svn: 249602
Summary:
This adds some more routines to `IRBuilder` around creating calls and
invokes to `gc.statepoint`. These will be used later.
Reviewers: reames, swaroop.sridhar
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13371
llvm-svn: 249596
No classes are specializing the symbol table traits, so no need to look
through a typedef for class API. Make a few more functions private
since only SymbolTableListTraits should be using them.
llvm-svn: 249476
The only specializations of `getSymTab()` were identical to the default
defined in `SymbolTableListTraits::getSymTab()`. Remove the
specializations, and stop treating it like a configuration point. Just
to be sure no one else accesses this, make it private.
llvm-svn: 249469
Factor out some common code used to get+set function prefix/prologue
data. This may come in handy if we ever decide to store personality
functions in the same way we store prefix/prologue data.
Differential Revision: http://reviews.llvm.org/D13120
Reviewed-by: bogner
llvm-svn: 249460
Summary:
The bitcode format is described in this document:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
For more info on ThinLTO see:
https://sites.google.com/site/llvmthinlto
The first customer is ThinLTO, however the data structures are designed
and named more generally based on prior feedback. There are a few
comments regarding how certain interfaces are used by ThinLTO, and the
options added here to gold currently have ThinLTO-specific names as the
behavior they provoke is currently ThinLTO-specific.
This patch includes support for generating per-module function indexes,
the combined index file via the gold plugin, and several tests
(more are included with the associated clang patch D11908).
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13107
llvm-svn: 249270
This commit changes the interface of the vld[1234], vld[234]lane, and vst[1234],
vst[234]lane ARM neon intrinsics and associates an address space with the
pointer that these intrinsics take. This changes, e.g.,
<2 x i32> @llvm.arm.neon.vld1.v2i32(i8*, i32)
to
<2 x i32> @llvm.arm.neon.vld1.v2i32.p0i8(i8*, i32)
This change ensures that address spaces are fully taken into account in the ARM
target during lowering of interleaved loads and stores.
Differential Revision: http://reviews.llvm.org/D12985
llvm-svn: 248887
HHVM calling convention, hhvmcc, is used by HHVM JIT for
functions in translated cache. We currently support LLVM back end to
generate code for X86-64 and may support other architectures in the
future.
In HHVM calling convention any GP register could be used to pass and
return values, with the exception of R12 which is reserved for
thread-local area and is callee-saved. Other than R12, we always
pass RBX and RBP as args, which are our virtual machine's stack pointer
and frame pointer respectively.
When we enter translation cache via hhvmcc function, we expect
the stack to be aligned at 16 bytes, i.e. skewed by 8 bytes as opposed
to standard ABI alignment. This affects stack object alignment and stack
adjustments for function calls.
One extra calling convention, hhvm_ccc, is used to call C++ helpers from
HHVM's translation cache. It is almost identical to standard C calling
convention with an exception of first argument which is passed in RBP
(before we use RDI, RSI, etc.)
Differential Revision: http://reviews.llvm.org/D12681
llvm-svn: 248832
When llvm declarations have argument names, it's helpful to actually
print those names when debugging. Arguably, it'd be nice to print them
all the time, but that would mean the IR we output wouldn't round trip
through bitcode, which doesn't store the names.
Make the varous print() methods in AsmWriter optionally print "for
debug" and set that flag in the dump() methods. The only thing this
does differently for now is print the argument names in declarations.
llvm-svn: 248692
Summary:
This also adds the first set of tests for operand bundles.
The optimizer has not been audited to ensure that it does the right
thing with operand bundles.
Depends on D12456.
Reviewers: reames, chandlerc, majnemer, dexonsmith, kmod, JosephTremoulet, rnk, bogner
Subscribers: maksfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D12457
llvm-svn: 248551
Summary:
This change teaches `CallInst`s and `InvokeInst`s to maintain a set of
operand bundles as part of its operands. `CallInst`s and `InvokeInst`s
with operand bundles co-allocate some space before their `Use` array to
hold meta information about which of its operands are part of an operand
bundle.
The strings corresponding to the bundle tags are interned into
`LLVMContextImpl::BundleTagCache`
This change does not include any parsing / bitcode support. That's the
next change.
Depends on D12455.
Reviewers: reames, chandlerc, majnemer, dexonsmith, kmod, JosephTremoulet, rnk, bogner
Subscribers: MatzeB, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12456
llvm-svn: 248527
Summary:
With this change, subclasses of `llvm::User` will be able to co-allocate
a variable number of bytes (called a "descriptor") with the `llvm::User`
instance. The co-allocated descriptor can later be accessed using
`llvm::User::getDescriptor`. This will be used in later changes to
implement operand bundles.
This change steals one bit from `NumUserOperands`, but given that it is
still 28 bits wide I don't think this will be a practical issue.
This change does not allow allocating hung off uses with descriptors.
This only for simplicity, not for any fundamental reason; and we can
easily add this functionality later if needed.
Reviewers: reames, chandlerc, dexonsmith, kmod, majnemer, pete, JosephTremoulet
Subscribers: pete, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12455
llvm-svn: 248453
Patch by: simoncook
Unlike BitCasts, AddrSpaceCasts do not always produce an output the same size as its input, which was previously assumed. This fixes cases where two address spaces do not have the same size pointer, as an assertion failure would occur when trying to prove deferenceability. LoopUnswitch is used in the particular test, but LICM also exhibits the same problem.
Differential Revision: http://reviews.llvm.org/D13008
llvm-svn: 248422
This patches removes the x86.sse41.pmovsx* intrinsics, provides a suitable upgrade path and updates relevant tests to sign extend a subvector instead.
LLVM counterpart to D12835
Differential Revision: http://reviews.llvm.org/D13002
llvm-svn: 248368
Because mod is always exact, this function should have never taken a rounding mode argument. The actual implementation still has issues, which I'll look at resolving in a subsequent patch.
llvm-svn: 248195
This is needed by all GlobalObjects (GlobalAlias, Function,
GlobalVariable), see the GlobalObject::getValueType which is used in
many places. If at some point that can be removed, then we can remove
this member.
llvm-svn: 247621
This was a flawed change - it just caused the getElementType call to be
deferred until later, when we really need to remove it. Now that the IR
for GlobalAliases has been updated, the root cause is addressed that way
instead and this change is no longer needed (and in fact gets in the way
- because we want to pass the pointee type directly down further).
Follow up patches to push this through GlobalValue, bitcode format, etc,
will come along soon.
This reverts commit 236160.
llvm-svn: 247585
Summary: This fixes a variety of typos in docs, code and headers.
Subscribers: jholewinski, sanjoy, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12626
llvm-svn: 247495
The rest of the EH pads are fine, since they have at most one label and
take fewer operands for the personality.
Old catchpad vs. new:
%5 = catchpad [i8* bitcast (i32 ()* @"\01?filt$0@0@main@@" to i8*)] to label %__except.ret.10 unwind label %catchendblock.9
-----
%5 = catchpad [i8* bitcast (i32 ()* @"\01?filt$0@0@main@@" to i8*)]
to label %__except.ret.10 unwind label %catchendblock.9
llvm-svn: 247433
This brings a warning.
cl : Command line warning D9035: option 'Og-' has been deprecated and will be removed in a future release
We should resolve PR11951 to remove this tweak.
llvm-svn: 247427
Fix embarrassing bugs I introduced to the `SlotTracker` in or around
r235785. I had us iterating through every instruction in a function
(and hitting a map in the LLVMContext) for every basic block in the
function.
While there, completely avoid the call to
`SlotTracker::processFunctionMetadata()` from
`SlotTracker::processFunction()` if we've speculatively done this
already in `SlotTracker::processModule()` by checking
`ShouldInitializeAllMetadata` (this wasn't an algorithmic problem, but
it's touching the same line of code).
Fixes PR24699.
llvm-svn: 247372
The exact semantics of 'catchpad' are really in the hands of the
personality routine so we shouldn't assume that they have no side
effects.
llvm-svn: 247322
don't correctly implement the scoping rules of C++11 range based for
loops. This kind of aliasing isn't a good idea anyways (and wasn't
really intended).
llvm-svn: 247241
manager to avoid a slow linear scan of every immutable pass and on every
attempt to find an analysis pass.
This speeds up 'check-llvm' on an unoptimized build for me by 15%, YMMV.
It should also help (a tiny bit) other folks that are really
bottlenecked on repeated runs of tiny pass pipelines across small IR
files.
llvm-svn: 247240
Currently this hits an assert that extload should
always be supported, which assumes integer extloads.
This moves a hack out of SI's argument lowering and
is covered by existing tests.
llvm-svn: 247113
Summary:
Fixes bug 24646. Previous code was not checking if an index into a vector
was valid, resulting in a SEGV. Fixed by assuming the construct can't
be parsed when given this input.
Reformat and add test.
Differential Revision: http://reviews.llvm.org/D12539
llvm-svn: 246774
Fixes bug 24646. Previous code was not checking if an index into a vector
was valid, resulting in a SEGV. Fixed by assuming the construct can't
be parsed when given this input.
llvm-svn: 246773
Summary:
This intrinsic can be used to extract a pointer to the exception caught by
a given catchpad. Its argument has token type and must be a `catchpad`.
Also clarify ExtendingLLVM documentation regarding overloaded intrinsics.
Reviewers: majnemer, andrew.w.kaylor, sanjoy, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12533
llvm-svn: 246752
Summary:
Add a `cleanupendpad` instruction, used to mark exceptional exits out of
cleanups (for languages/targets that can abort a cleanup with another
exception). The `cleanupendpad` instruction is similar to the `catchendpad`
instruction in that it is an EH pad which is the target of unwind edges in
the handler and which itself has an unwind edge to the next EH action.
The `cleanupendpad` instruction, similar to `cleanupret` has a `cleanuppad`
argument indicating which cleanup it exits. The unwind successors of a
`cleanuppad`'s `cleanupendpad`s must agree with each other and with its
`cleanupret`s.
Update WinEHPrepare (and docs/tests) to accomodate `cleanupendpad`.
Reviewers: rnk, andrew.w.kaylor, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12433
llvm-svn: 246751
We used to accept (and even test, and generate) 16-byte alignment
for 32-byte nontemporal stores, but they require 32-byte alignment,
per SDM. Found by inspection.
Instead of hardcoding 16 in the patfrag, check for natural alignment.
Also fix the autoupgrade and the various tests.
Also, use explicit -mattr instead of -mcpu: I stared at the output
several minutes wondering why I get 2x movntps for the unaligned
case (which is the ideal output, but needs some work: see FIXME),
until I remembered corei7-avx implies +slow-unaligned-mem-32.
llvm-svn: 246733
Function::print isn't interestingly different from Value::print. Just
let the only caller (in PrintCallGraphPass) call the Value version.
llvm-svn: 246720
This patch defines 'unpredictable' metadata. This metadata can be used to signal to the optimizer
or backend that a branch or switch is unpredictable, and therefore, it's probably better to not
split a compound predicate into multiple branches such as in CodeGenPrepare::splitBranchCondition().
This was discussed in:
https://llvm.org/bugs/show_bug.cgi?id=23827
Dependent patches to alter codegen and expose this in clang to follow.
Differential Revision; http://reviews.llvm.org/D12341
llvm-svn: 246688
Summary:
Add the necessary plumbing so that llvm_token_ty can be used as an
argument/return type in intrinsic definitions and correspondingly require
TokenTy in function types. TokenTy is an opaque type that has no target
lowering, but can be used in machine-independent intrinsics. It is
required for the upcoming llvm.eh.padparam intrinsic.
Reviewers: majnemer, rnk
Subscribers: stoklund, llvm-commits
Differential Revision: http://reviews.llvm.org/D12532
llvm-svn: 246651
This would have suppressed bug 24578, about use-after-
destroy on User and MDNode. Rolled back suppression for
the sake of code cleanliness, in preferance for bug
tracking to keep track of this issue.
This reverts commit 6ff2baabc4625d5b0a8dccf76aa0f72d930ea6c0.
llvm-svn: 246484
This fixes PR24621 and matches what we do for `DILocation`. Although
the limit seems somewhat artificial, there are places in the backend
that also assume 16-bit columns, so we may as well just be consistent
about the limits.
llvm-svn: 246349
Add `Function::setSubprogram()` and `Function::getSubprogram()`,
convenience methods to forward to `setMetadata()` and `getMetadata()`,
respectively, and deal in `DISubprogram` instead of `MDNode`.
Also add a verifier check to enforce that `!dbg` attachments are always
subprograms.
Originally (when I had the llvm-dev discussion back in April) I thought
I'd store a pointer directly on `llvm::Function` for these attachments
-- we frequently have debug info, and that's much cheaper than using map
in the context if there are no other function-level attachments -- but
for now I'm just using the generic infrastructure. Let's add the extra
complexity only if this shows up in a profile.
llvm-svn: 246339
Currently the DWARF backend requires that subprograms have a type, and
the type is ignored if it has an empty type array. The long term
direction here -- see PR23079 -- is instead to skip the type entirely if
there's no valid type.
It turns out we have cases in tree of missing types on subprograms, but
since they're not referenced by compile units, the backend never crashes
on them. One option would be to add a Verifier check that subprograms
have types, and fix the bitrot. However, this is a fair bit of churn
(20-30 testcases) that would be reversed anyway by PR23079.
I found this inconsistency because of a WIP patch and upgrade script for
PR23367 that started crashing on test/DebugInfo/2010-10-01-crash.ll.
This commit updates the testcase to reference the subprogram from the
compile unit, and fixes the resulting crash (in line with the direction
of PR23079). This also updates `DIBuilder` to stop assuming a non-null
pointer for the subroutine types.
llvm-svn: 246333
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
llvm-svn: 246327
Change `DIBuilder` always to produce 'distinct' nodes when creating
`DISubprogram` definitions. I measured a ~5% memory improvement in the
link step (of ld64) when using `-flto -g`.
`DISubprogram`s are used in two ways in the debug info graph.
Some are definitions, point at actual functions, and can't really be
shared between compile units. With full debug info, these point down at
their variables, forming uniquing cycles. These uniquing cycles are
expensive to link between modules, since all unique nodes that reference
them transitively need to be duplicated (see commit message for r244181
for more details).
Others are declarations, primarily used for member functions in the type
hierarchy. Definitions never show up there; instead, a definition
points at its corresponding declaration node.
I started by making all subprograms 'distinct'. However, that was too
big a hammer: memory usage *increased* ~5% (net increase vs. this patch
of ~10%) because the 'distinct' declarations undermine LTO type
uniquing. This is a targeted fix for the definitions (where uniquing is
an observable problem).
A couple of notes:
- There's an accompanying commit to update IRGen testcases in clang.
- ^ That's what I'm using to test this commit.
- In a follow-up, I'll change the verifier to require 'distinct' on
definitions and add an upgrade to `BitcodeReader`.
llvm-svn: 246098
Summary:
WinEHPrepare is going to require that cleanuppad and catchpad produce values
of token type which are consumed by any cleanupret or catchret exiting the
pad. This change updates the signatures of those operators to require/enforce
that the type produced by the pads is token type and that the rets have an
appropriate argument.
The catchpad argument of a `CatchReturnInst` must be a `CatchPadInst` (and
similarly for `CleanupReturnInst`/`CleanupPadInst`). To accommodate that
restriction, this change adds a notion of an operator constraint to both
LLParser and BitcodeReader, allowing appropriate sentinels to be constructed
for forward references and appropriate error messages to be emitted for
illegal inputs.
Also add a verifier rule (noted in LangRef) that a catchpad with a catchpad
predecessor must have no other predecessors; this ensures that WinEHPrepare
will see the expected linear relationship between sibling catches on the
same try.
Lastly, remove some superfluous/vestigial casts from instruction operand
setters operating on BasicBlocks.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12108
llvm-svn: 245797
There was already a good error path for this. Added a test for it & made
a minor code change to ensure the error path was actually reached,
rather than crashing before we got that far.
llvm-svn: 245795
Gets a bit tricky in the ValueMapper, of course - not sure if we should
just expose a list of explicit types for each Value so that the
ValueMapper can be neutral to these special cases (it's OK for things
like load, where the explicit type is the result type - but when that's
not the case, it means plumbing through another "special" type... )
llvm-svn: 245728
David Majnemer (the original author) believes this to be an impossible
condition to reach anyway, and no test cases cover this so we'll go with
that.
llvm-svn: 245712
and make it always preserve debug locations, since all callers wanted this
behavior anyway.
This is addressing a post-commit review feedback for r245589.
NFC (inside the LLVM tree).
llvm-svn: 245622
Since r245605, the clang headers don't use these anymore.
r245165 updated some of the tests already; update the others, add
an autoupgrade, remove the intrinsics, and cleanup the definitions.
Differential Revision: http://reviews.llvm.org/D10555
llvm-svn: 245606
Instruction::dropUnknownMetadata(KnownSet) is supposed to preserve all
metadata in KnownSet, but the condition for DebugLocs was inverted.
Most users of dropUnknownMetadata() actually worked around this by not
adding LLVMContext::MD_dbg to their list of KnowIDs.
This is now made explicit.
llvm-svn: 245589
without *requiring* it.
This allows a pass indicate that it will use an analysis if available
(through getAnalysisIfAvailable). When the pass manager knows this, it
will refrain from deleting that analysis if it can. Naturally, it will
still get invalidated at the correct time. These passes are not
considered when scheduling the pass pipeline, so typically they will
require manual scheduling, but this may also allow passes with
getAnalysisIfAvailable to find the analysis more often if nothing after
them requires that analysis and it wasn't invalidated.
I don't have a particular use case with the current passes, but with my
new structure for alias analyses, this will be very useful. We want to
allow people to customize the set of AAs available by scheduling
additional passes. These's aren't ever *required* for obvious reasons.
So we need some way to mark in the legacy pass manager that they will
still be used if available.
This is essentially how analysis groups already work. But this makes the
feature generally available and more explicit. It should allow the AA
change to not impact how people trigger a custom alias analysis being
available at a certain point in compilation.
Differential Revision: http://reviews.llvm.org/D12114
llvm-svn: 245409
Some personality routines require funclet exit points to be clearly
marked, this is done by producing a token at the funclet pad and
consuming it at the corresponding ret instruction. CleanupReturnInst
already had a spot for this operand but CatchReturnInst did not.
Other personality routines don't need to use this which is why it has
been made optional.
llvm-svn: 245149
This introduces the basic functionality to support "token types".
The motivation stems from the need to perform operations on a Value
whose provenance cannot be obscured.
There are several applications for such a type but my immediate
motivation stems from WinEH. Our personality routine enforces a
single-entry - single-exit regime for cleanups. After several rounds of
optimizations, we may be left with a terminator whose "cleanup-entry
block" is not entirely clear because control flow has merged two
cleanups together. We have experimented with using labels as operands
inside of instructions which are not terminators to indicate where we
came from but found that LLVM does not expect such exotic uses of
BasicBlocks.
Instead, we can use this new type to clearly associate the "entry point"
and "exit point" of our cleanup. This is done by having the cleanuppad
yield a Token and consuming it at the cleanupret.
The token type makes it impossible to obscure or otherwise hide the
Value, making it trivial to track the relationship between the two
points.
What is the burden to the optimizer? Well, it turns out we have already
paid down this cost by accepting that there are certain calls that we
are not permitted to duplicate, optimizations have to watch out for
such instructions anyway. There are additional places in the optimizer
that we will probably have to update but early examination has given me
the impression that this will not be heroic.
Differential Revision: http://reviews.llvm.org/D11861
llvm-svn: 245029
This patch and a relatec clang patch solve the problem of having to explicitly enable analysis when specifying a loop hint pragma to get the diagnostics. Passing AlwasyPrint as the pass name (see below) causes the front-end to print the diagnostic if the user has specified '-Rpass-analysis' without an '=<target-pass>’. Users of loop hints can pass that compiler option without having to specify the pass and they will get diagnostics for only those loops with loop hints.
llvm-svn: 244555
This patch moves checking the threshold of runtime pointer checks to the vectorization requirements (late diagnostics) and emits a diagnostic that infroms the user the loop would be vectorized if not for exceeding the pointer-check threshold. Clang will also append the options that can be used to allow vectorization.
llvm-svn: 244523
This patch moves the verification of fast-math to just before vectorization is done. This way we can tell clang to append the command line options would that allow floating-point commutativity. Specifically those are enableing fast-math or specifying a loop hint.
llvm-svn: 244489
After r244074, we now have a successors() method to iterate over
all the successors of a TerminatorInst. This commit changes a bunch
of eligible loops to use it.
llvm-svn: 244260
This is intended to help support the idiom of a class that has some
other objects (or multiple arrays of different types of objects)
appended on the end, which is used quite heavily in clang.
Differential Revision: http://reviews.llvm.org/D11272
llvm-svn: 244164
Summary:
Emit both DWARF and CodeView if "CodeView" and "Dwarf Version" module
flags are set.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11756
llvm-svn: 244158
As documented in the LLVM Coding Standards, indeed MSVC incorrectly asserts
on this in Debug mode. This happens when building clang with Visual C++ and
-triple i686-pc-windows-gnu on these clang regression tests:
clang/test/CodeGen/2011-03-08-ZeroFieldUnionInitializer.c
clang/test/CodeGen/empty-union-init.c
llvm-svn: 243996
This change was done as an audit and is by inspection. The new EH
system is still very much a work in progress. NFC for the landingpad
case.
llvm-svn: 243965
Summary: This patch adds enum value for an existing metadata type -- make.implicit. Using preassigned enum will be helpful to get compile time type checking and avoid string construction and comparison. The patch also changes uses of make.implicit from string metadata to enum metadata. There is no functionality change.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11698
llvm-svn: 243954
contained types into the space when we have no contained types. This
fixes the UB stemming from a call to memcpy with a null pointer. This
also reduces the calls to allocate because this actually happens in
a notable client - Clang.
Found by UBSan.
llvm-svn: 243944
Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s.
The backend is liable to start relying on that (if it hasn't already),
so make uniquable `DICompileUnit`s illegal and automatically upgrade old
bitcode. This is a nice cleanup, since we can remove an unnecessary
`DenseSet` (and the associated uniquing info) from `LLVMContextImpl`.
Almost all the testcases were updated with this script:
git grep -e '= !DICompileUnit' -l -- test |
grep -v test/Bitcode |
xargs sed -i '' -e 's,= !DICompileUnit,= distinct !DICompileUnit,'
I imagine something similar should work for out-of-tree testcases.
llvm-svn: 243885
Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags,
using `DW_TAG_variable` in their place Stop exposing the `tag:` field at
all in the assembly format for `DILocalVariable`.
Most of the testcase updates were generated by the following sed script:
find test/ -name "*.ll" -o -name "*.mir" |
xargs grep -l 'DILocalVariable' |
xargs sed -i '' \
-e 's/tag: DW_TAG_arg_variable, //' \
-e 's/tag: DW_TAG_auto_variable, //'
There were only a handful of tests in `test/Assembly` that I needed to
update by hand.
(Note: a follow-up could change `DILocalVariable::DILocalVariable()` to
set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable`
(as appropriate), instead of having that logic magically in the backend
in `DbgVariable`. I've added a FIXME to that effect.)
llvm-svn: 243774
This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Differential Revision: http://reviews.llvm.org/D11097
llvm-svn: 243766
Replace the general `createLocalVariable()` with two more specific
functions: `createParameterVariable()` and `createAutoVariable()`, and
rewrite the documentation.
Besides cleaning up the API, this avoids exposing the fake DWARF tags
`DW_TAG_arg_variable` and `DW_TAG_auto_variable` to frontends, and is
preparation for removing them completely.
llvm-svn: 243764
Summary:
As added initially, statepoints required their call targets to be a
constant pointer null if ``numPatchBytes`` was non-zero. This turns out
to be a problem ergonomically, since there is no way to mark patchable
statepoints as calling a (readable) symbolic value.
This change remove the restriction of requiring ``null`` call targets
for patchable statepoints, and changes PlaceSafepoints to maintain the
symbolic call target through its transformation.
Reviewers: reames, swaroop.sridhar
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11550
llvm-svn: 243502
As a stop-gap, retrieving the InlineAsm's function type was done via the
pointee type of its (pointer) Value type.
Instead, pass down and store the FunctionType in the InlineAsm object.
The only wrinkle with this is the ConstantUniqueMap, which then needs to
ferry the FunctionType down through the InlineAsmKeyType. This could be
done a bit differently if the ConstantInfo trait were broadened a bit to
provide an extension point for access to the TypeClass object from the
ValType objects, so that the ConstantUniqueMap<InlineAsm> would then be
keyed on FunctionTypes instead of PointerTypes that point to
FunctionTypes.
This drops the number of IR tests that don't roundtrip through bitcode*
without calling PointerType::getElementType from 416 to 8 (out of
10733). 3 of those crash when roundtripping at ToT anyway.
* modulo various unavoidable uses of pointer types when validating IR
(for now) and in the way globals are parsed, unfortunately. These
cases will either go away (because such validation will no longer be
necessary or possible when pointee types are opaque), or have to be
made simultaneously with the removal of pointee types.
llvm-svn: 243356
This commit publicly exposes the method 'getLocalSlot' in the
'ModuleSlotTracker' class.
This change is useful for MIR serialization, to serialize the unnamed basic
block and unnamed alloca references.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 243336
This reverts commit r243135.
Feedback from Craig Topper and David Blaikie was that we don't put const on Type as it has no mutable state.
llvm-svn: 243283
Add a verifier check that `DILocalVariable`s of tag
`DW_TAG_arg_variable` always have a non-zero 'arg:' field, and those of
tag `DW_TAG_auto_variable` always have a zero 'arg:' field. These are
the only configurations that are properly understood by the backend.
(Also, fix the bad examples in LangRef and test/Assembler, and fix the
bug in Kaleidoscope Ch8.)
A large number of testcases seem to have bitrotted their way forward
from some ancient version of the debug info hierarchy that didn't have
`arg:` parameters. If you have out-of-tree testcases that start failing
in the verifier and you don't care enough to get the `arg:` right, you
may have some luck just calling:
sed -e 's/, arg: 0/, arg: 1/'
or some such, but I hand-updated the ones in tree.
llvm-svn: 243183
Instead of the pattern
for (auto I = x.rbegin(), E = x.end(); I != E; ++I)
we can use make_range to construct the reverse range and iterate using
that instead.
llvm-svn: 243163
Remove unnecessary and confusing common base class for `DICompositeType`
and `DISubroutineType`.
While at a high-level `DISubroutineType` is a sort of composite of other
types, it has no shared code paths, and its fields are completely
disjoint. This relationship was left over from the old debug info
hierarchy.
llvm-svn: 243160
Handle `DISubroutineType` up-front rather than as part of a branch for
`DICompositeTypeBase`. The only shared code path was looking through
the base type, but `DISubroutineType` can never have a base type.
This also removes the last use of `DICompositeTypeBase`, since we can
strengthen the cast to `DICompositeType`.
llvm-svn: 243159
Remove an unnecessary (and confusing) common subclass for
`DIDerivedType` and `DICompositeType`. These classes aren't really
related, and even in the old debug info hierarchy, there was a
long-standing FIXME to separate them.
llvm-svn: 243152
We really only want to check this for unions and classes (all the other
tags have been ruled out), so simplify the check and move it to the
right place.
llvm-svn: 243150
Remove unnecessary references to `DW_TAG_subroutine_type` in
`visitDICompositeType()` and `visitDIDerivedTypeBase()`, since
`visitDISubroutineType()` doesn't call either of those (and shouldn't,
since subroutine types are really quite special).
llvm-svn: 243149
The surrounding code proves in both cases that these must be
`DIDerivedType` if they're `DIDerivedTypeBase`, so strengthen the
`dyn_cast`s to the more specific type.
llvm-svn: 243143
Almost all methods in DataLayout took mutable pointers but didn't need to.
These were only accessing constant methods of the types, or using the Type*
to key a map. Neither of these needs a mutable pointer.
llvm-svn: 243135
This commit extracts the code that prints out a name of an LLVM value without a
prefix from a function 'PrintLLVMName' into a publicly accessible function named
'printLLVMNameWithoutPrefix'.
This change would be useful for MIR serialization, as it would allow the MIR
printer to reuse this function to print out the names of the external symbol
machine operands.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 242803
Revert the changes to the C API LLVMBuildLandingPad that were part of
the personality function move. We now set the personality on the parent
function when the C API attempts to construct a landingpad with a
personality.
This reverts commit r240010.
llvm-svn: 242372
This is a necessary prerequisite for bootstrapping the emission
of debug info inside modules.
- Adds a FlagExternalTypeRef to DICompositeType.
External types must have a unique identifier.
- External type references are emitted using a forward declaration
with a DW_AT_signature([DW_FORM_ref_sig8]) based on the UID.
http://reviews.llvm.org/D9612
llvm-svn: 242302
Summary:
The capability was lost with D10429 where the personality function was set at function level rather than landing pad level. Now there is no way to get/set the personality function from the C API. That is a problem.
Note that the whole thing could be avoided by improving the C API testing, as started by D10725
Reviewers: chandlerc, bogner, majnemer, andrew.w.kaylor, rafael, rnk, axw
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D10946
llvm-svn: 242104
This change adds new attribute called "argmemonly". Function marked with this attribute can only access memory through it's argument pointers. This attribute directly corresponds to the "OnlyAccessesArgumentPointees" ModRef behaviour in alias analysis.
Differential Revision: http://reviews.llvm.org/D10398
llvm-svn: 241979
Summary:
This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Reviewers: rnk, JosephTremoulet, reames, nlewycky, rjmccall
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11041
llvm-svn: 241888
The justification of this change is here: http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-March/082989.html
According to the current GEP syntax, vector GEP requires that each index must be a vector with the same number of elements.
%A = getelementptr i8, <4 x i8*> %ptrs, <4 x i64> %offsets
In this implementation I let each index be or vector or scalar. All vector indices must have the same number of elements. The scalar value will mean the splat vector value.
(1) %A = getelementptr i8, i8* %ptr, <4 x i64> %offsets
or
(2) %A = getelementptr i8, <4 x i8*> %ptrs, i64 %offset
In all cases the %A type is <4 x i8*>
In the case (2) we add the same offset to all pointers.
The case (1) covers C[B[i]] case, when we have the same base C and different offsets B[i].
The documentation is updated.
http://reviews.llvm.org/D10496
llvm-svn: 241788
Summary:
Initially, these intrinsics seemed like part of a family of "frame"
related intrinsics, but now I think that's more confusing than helpful.
Initially, the LangRef specified that this would create a new kind of
allocation that would be allocated at a fixed offset from the frame
pointer (EBP/RBP). We ended up dropping that design, and leaving the
stack frame layout alone.
These intrinsics are really about sharing local stack allocations, not
frame pointers. I intend to go further and add an `llvm.localaddress()`
intrinsic that returns whatever register (EBP, ESI, ESP, RBX) is being
used to address locals, which should not be confused with the frame
pointer.
Naming suggestions at this point are welcome, I'm happy to re-run sed.
Reviewers: majnemer, nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11011
llvm-svn: 241633
This reverts commit r241602. We had a latent bug in SCCP where we would
make a basic block empty and then proceed to ask questions about it's
terminator.
llvm-svn: 241616
getFirstNonPHI's documentation states that it returns null if there is
no non-PHI instruction. However, it instead returns a pointer to the
end iterator. The implementation of getFirstNonPHI claims that
dereferencing the iterator will result in an assertion failure but this
doesn't occur. Instead, machinery like getFirstInsertionPt will attempt
to isa<> this invalid memory which results in unpredictable behavior.
Instead, make getFirst* return null if no such instruction exists.
llvm-svn: 241570
Summary:
Looking at r241279, I noticed that UpgradedIntrinsics only gets written
to in the following code:
if (UpgradeIntrinsicFunction(&F, NewFn))
UpgradedIntrinsics[&F] = NewFn;
Looking through UpgradeIntrinsicFunction, we always return false OR
NewFn will be set to a different function from our source.
This patch pulls the F != NewFn into UpgradeIntrinsicFunction as an
assert, and removes the check from callers of UpgradeIntrinsicFunction.
Reviewers: rafael, chandlerc
Subscribers: llvm-commits-list
Differential Revision: http://reviews.llvm.org/D10915
llvm-svn: 241369
It is meant to be used to record modules @imported by the current
compile unit, so a debugger an import the same modules to replicate this
environment before dropping into the expression evaluator.
DIModule is a sibling to DINamespace and behaves quite similarly.
In addition to the name of the module it also records the module
configuration details that are necessary to uniquely identify the module.
This includes the configuration macros (e.g., -DNDEBUG), the include path
where the module.map file is to be found, and the isysroot.
The idea is that the backend will turn this into a DW_TAG_module.
http://reviews.llvm.org/D9614
rdar://problem/20965932
llvm-svn: 241017
Allow callers of `Value::print()` and `Metadata::print()` to pass in a
`ModuleSlotTracker`. This allows them to pay only once for calculating
module-level slots (such as Metadata).
This is related to PR23865, where there was a huge cost for
`MachineFunction::print()`. Although I don't have a *particular* user
in mind for this new code, I have hit big slowdowns before when running
`opt -debug`, and I think this will be useful. Going forward, if
someone hits a big slowdown with `print()` statements, they can create a
`ModuleSlotTracker` and send it through. Similarly, adding support to
`Value::dump()` and `Metadata::dump()` should be trivial.
I added unit tests to be sure the `print()` functions actually behave
the same way with and without the slot tracker.
llvm-svn: 240867
For another 1% speedup on the testcase in PR23865, push the
`ModuleSlotTracker` through to metadata-related printing in
`MachineBasicBlock::print()`.
llvm-svn: 240848
Expose enough of the IR-level `SlotTracker` so that
`MachineFunction::print()` can use a single one for printing
`BasicBlock`s. Next step would be to lift this through a few more APIs
so that we can make other print methods faster.
Fixes PR23865, changing the runtime of `llc -print-machineinstrs` from
many minutes (killed after 3 minutes, but it wasn't very close) to
13 seconds for a 502185 line dump.
llvm-svn: 240842
We support invoking a subset of llvm's intrinsics, but the verifier didn't account for this. We had previously added a special case to verify invokes of statepoints. By generalizing the code in terms of CallSite, we can verify invokes of other intrinsics as well. Interestingly, this found one test case which was invalid.
Note: I'm deliberately leaving the naming change from CI to CS to a follow up change. That will happen shortly, I just wanted to reduce the diff to make it clear what was happening with this one.
Differential Revision: http://reviews.llvm.org/D10118
llvm-svn: 240836
This is part of the work to devirtualize Value.
The old pattern was to call replaceUsesOfWithOnConstant which was overridden by
subclasses. Those could then call replaceUsesOfWithOnConstantImpl on Constant
to handle deleting the current value.
To be consistent with other parts of the code, this has been changed so that we
call the method on Constant, and that dispatches to an Impl on subclasses.
As part of this, it made sense to rename the methods to be more descriptive. The
new name is Constant::handleOperandChange, and it requires that all subclasses of
Constant implement handleOperandChangeImpl, even if they just throw an error if
they shouldn't be called.
Reviewed by Duncan Exon Smith.
llvm-svn: 240567
The only caller of this method is Value::replaceAllUsesWith which
explicitly checks that we are not a GlobalValue. So replace the
body with an unreachable to ensure that we never call it.
The unreachable itself is moved to GlobalValue not GlobalVariable
as that is the base class of all the globals we don't want to call
this method on.
Note, this patch is short lived as i'll soon refactor all callers
of this method.
llvm-svn: 240486
This reorganizes destroyConstant and destroyConstantImpl.
Now there is only destroyConstant in Constant itself, while
subclasses are required to implement destroyConstantImpl.
destroyConstantImpl no longer calls delete but is instead only
responsible for removing the constant from any maps in which it
is contained.
Reviewed by Duncan Exon Smith.
llvm-svn: 240471
The summary is that it moves the mangling earlier and replaces a few
calls to .addExternalSymbol with addSym.
I originally wanted to replace all the uses of addExternalSymbol with
addSym, but noticed it was a lot of work and doesn't need to be done
all at once.
llvm-svn: 240395
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
Summary:
Currently intrinsics don't affect the creation of the call graph.
This is not accurate with respect to statepoint and patchpoint
intrinsics -- these do call (or invoke) LLVM level functions.
This change fixes this inconsistency by adding a call to the external
node for call sites that call these non-leaf intrinsics. This coupled
with the fact that these intrinsics also escape the function pointer
they call gives us a conservatively correct call graph.
Reviewers: reames, chandlerc, atrick, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10526
llvm-svn: 240039
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
llvm-svn: 239940
If globals can be unnamed, there is no reason for aliases to be different.
The restriction was there since the original implementation in r36435. I
can only guess it was there because of the old bison parser for the old
alias syntax.
llvm-svn: 239921
Adds static_asserts to ensure alignment of concatenated objects is
correct, and fixes them where they are not.
Also changes the definition of AlignOf to use constexpr, except on
MSVC, to avoid enum comparison warnings from GCC.
(There's not too much of this in llvm itself, most of the fun is in
clang).
This seems to make LLVM actually work without Bus Error on 32bit
sparc.
Differential Revision: http://reviews.llvm.org/D10271
llvm-svn: 239872
This patch adds the safe stack instrumentation pass to LLVM, which separates
the program stack into a safe stack, which stores return addresses, register
spills, and local variables that are statically verified to be accessed
in a safe way, and the unsafe stack, which stores everything else. Such
separation makes it much harder for an attacker to corrupt objects on the
safe stack, including function pointers stored in spilled registers and
return addresses. You can find more information about the safe stack, as
well as other parts of or control-flow hijack protection technique in our
OSDI paper on code-pointer integrity (http://dslab.epfl.ch/pubs/cpi.pdf)
and our project website (http://levee.epfl.ch).
The overhead of our implementation of the safe stack is very close to zero
(0.01% on the Phoronix benchmarks). This is lower than the overhead of
stack cookies, which are supported by LLVM and are commonly used today,
yet the security guarantees of the safe stack are strictly stronger than
stack cookies. In some cases, the safe stack improves performance due to
better cache locality.
Our current implementation of the safe stack is stable and robust, we
used it to recompile multiple projects on Linux including Chromium, and
we also recompiled the entire FreeBSD user-space system and more than 100
packages. We ran unit tests on the FreeBSD system and many of the packages
and observed no errors caused by the safe stack. The safe stack is also fully
binary compatible with non-instrumented code and can be applied to parts of
a program selectively.
This patch is our implementation of the safe stack on top of LLVM. The
patches make the following changes:
- Add the safestack function attribute, similar to the ssp, sspstrong and
sspreq attributes.
- Add the SafeStack instrumentation pass that applies the safe stack to all
functions that have the safestack attribute. This pass moves all unsafe local
variables to the unsafe stack with a separate stack pointer, whereas all
safe variables remain on the regular stack that is managed by LLVM as usual.
- Invoke the pass as the last stage before code generation (at the same time
the existing cookie-based stack protector pass is invoked).
- Add unit tests for the safe stack.
Original patch by Volodymyr Kuznetsov and others at the Dependable Systems
Lab at EPFL; updates and upstreaming by myself.
Differential Revision: http://reviews.llvm.org/D6094
llvm-svn: 239761
This commit connects the machine function analysis pass (which creates machine
functions) to the MIR parser, which will initialize the machine functions
with the state from the MIR file and reconstruct the machine IR.
This commit introduces a new interface called 'MachineFunctionInitializer',
which can be used to provide custom initialization for the machine functions.
This commit also introduces a new diagnostic class called
'DiagnosticInfoMIRParser' which is used for MIR parsing errors.
This commit modifies the default diagnostic handling in LLVMContext - now the
the diagnostics are printed directly into llvm::errs() so that the MIR parsing
errors can be printed with colours.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9928
llvm-svn: 239753
In the glorious future of opaque pointer types, it won't be possible to
retrieve the pointee type of a pointer type which is what's being done
in this GEP loop - but the first iteration is always a pointer type and
the loop doesn't care about that case, except whether or not the index
is a constant.
So pull that special case out before the loop and start at the second
iteration (index 1) instead.
Originally committed in r236670 and reverted with a test case in
r239015. This change keeps the test case working while also avoiding
depending on pointee types.
llvm-svn: 239629
For hung off uses, we need a Use* to tell use where the operands are.
This was User::OperandList but we want to remove that to save space
of all subclasses which aren't making use of 'hung off uses'.
Hung off uses now allocate their own 'OperandList' Use* in the
User::new which they call.
getOperandList() now uses the hung off uses bit to work out where the
Use* for the OperandList lives. If a User has hung off uses, then this
bit tells them to go back a single Use* from the User* and use that
value as the OperandList.
If a User has no hung off uses, then we get the first operand by
subtracting (NumOperands * sizeof(Use)) from the User this pointer.
This saves a pointer from User and all subclasses. Given the average
size of a subclass of User is 112 or 128 bytes, this saves around 7% of space
With malloc tending to align to 16-bytes the real saving is typically more like 3.5%.
On 'opt -O2 verify-uselistorder.lto.bc', peak memory usage prior to this change
is 149MB and after is 143MB so the savings are around 2.5% of peak.
Looking at some passes which allocate many Instructions and Values, parseIR drops
from 54.25MB to 52.21MB while the Inliner calls to Instruction::clone() drops
from 28.20MB to 27.05MB.
Reviewed by Duncan Exon Smith.
llvm-svn: 239623
There are now 2 versions of User::new. The first takes a size_t and is the current
implementation for subclasses which need 0 or more Use's allocated for their operands.
The new version takes no extra arguments to say that this subclass needs 'hung off uses'.
The HungOffUses bool is now set in this version of User::new and we can assert in
allocHungOffUses that we are allowed to have hung off uses.
This ensures we call the correct version of User::new for subclasses which need hung off uses.
A future commit will then allocate space for a single Use* which will be used
in place of User::OperandList once that field has been removed.
Reviewed by Duncan Exon Smith.
llvm-svn: 239622
This is to try make it very clear that subclasses shouldn't be changing
the value directly. Now that OperandList for normal instructions is computed
using the NumOperands, its critical that the NumOperands is accurate or we
could compute the wrong offset to the first operand.
I looked over all places which update NumOperands and they are all safe.
Hung off use User's don't use NumOperands to compute the OperandList so they
are safe to continue to manipulate it. The only other User which changed it
was GlobalVariable which has an optional init list but always allocated space
for a single Use. It was correctly setting NumOperands to 1 before setting an
initializer, and setting it to 0 after clearing the init list, so the order was safe.
Added some comments to that code to make sure that this isn't changed in future
without being aware of this constraint.
Reviewed by Duncan Exon Smith.
llvm-svn: 239621
We don't want anyone to access OperandList directly as its going to be removed
and computed instead. This uses getter's and setter's instead in which we
can later change the underlying implementation of OperandList.
Reviewed by Duncan Exon Smith.
llvm-svn: 239620
This improves debug locations in passes that do a lot of basic block
transformations. Important case is LoopUnroll pass, the test for correct
debug locations accompanies this change.
Test Plan: regression test suite
Reviewers: dblaikie, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10367
llvm-svn: 239551
This reverts commit r239437.
This broke clang-cl self-hosts. We'd end up calling the __imp_ symbol
directly instead of using it to do an indirect function call.
llvm-svn: 239502
PhiNode, SwitchInst, LandingPad and IndirectBr all had virtually identical
logic for growing the hung off uses.
Move it to User so that they can all call a single shared implementation.
Their destructors were all empty after this change and were deleted. They all
have virtual clone_impl methods which can be used as vtable anchors.
Reviewed by Duncan Exon Smith.
llvm-svn: 239492
Now that the subclasses which care about hung off uses let ~User clean it up,
there's no need for a separate method. Just inline it to ~User and delete it.
Reviewed by Duncan Exon Smith.
llvm-svn: 239491
Currently all of the logic for deleting hung off uses, which PHI/switch/etc use,
is in their classes.
This adds a bit to Value which tracks whether that user had hung off uses,
then User can be responsible for clearing them instead of the sub classes.
Note, the bit used here was taken from NumOperands which was 30-bits.
Given the reduction to 29 bits, and the average User being just over 100 bytes,
a single User with 29-bits of num operands would need 50GB of RAM for itself
so its reasonable to assume that 29-bits is enough for now.
This is a step towards hiding all the hung off uses logic in the User.
Reviewed by Duncan Exon Smith.
llvm-svn: 239490
PhiNode's need to allocate space for an array of Use[N] and then BasicBlock*[N].
They had their own allocHungOffUses to handle all of this. This moves the logic
in to User::allocHungOffUses and PhiNode passes in a bool to say to allocate
the BB* space too.
Reviewed by Duncan Exon Smith.
llvm-svn: 239489
If the first argument to a function is a 'this' argument and the second
has the sret attribute, the ArgumentPromotion pass may promote the 'this'
argument to more than one argument, violating the IR constraint that 'sret'
may only be applied to the first or second argument.
Although this IR constraint is arguably unnecessary, it highlighted the fact
that ArgPromotion does not need to preserve this attribute. Dropping the
attribute reduces register pressure in the backend by avoiding the register
copy required by sret. Because sret implies noalias, we also replace the
former with the latter.
Differential Revision: http://reviews.llvm.org/D10353
llvm-svn: 239488
If the first character in a metadata attachment's name is a digit, it has
to be output using an escape sequence, otherwise it's not valid text IR.
Removed an over-zealous assert from LLVMContext which didn't allow this.
The rule should only apply to text IR. Actual names can have any sequence
of non-NUL bytes.
Also added some documentation on accepted names.
Bug found with AFL fuzz.
llvm-svn: 238867
LLVMContext. Production builds of clang do not set names on most
Value's, so this is wasted space on almost all subclasses of Value.
This reduces the size of all Value subclasses by 8 bytes on 64 bit
hosts.
The one tricky part of this change is averting compile time regression
by keeping Value::hasName() fast. This required stealing bits out of
NumOperands.
With this change, peak memory usage on verify-uselistorder-nodbg.lto.bc
is decreased by approximately 2.3% (~3MB absolute on my machine).
llvm-svn: 238791
According to the TBAA description struct-path tag node can have an optional IsConstant field. Add corresponding argument to MDBuilder::createTBAAStructTagNode.
Reviewed By: hfinkel
Differential Revision: http://reviews.llvm.org/D10160
llvm-svn: 238749
Alternatively, this type could be derived on-demand whenever
getResultElementType is called - if someone thinks that's the better
choice (simple time/space tradeoff), I'm happy to give it a go.
llvm-svn: 238716
While working on another change, I noticed that the naming in this function was mildly deceptive. While fixing that, I took the oppurtunity to modernize some of the code. NFC intended.
llvm-svn: 238252
in POWER8:
vadduqm
vaddeuqm
vaddcuq
vaddecuq
vsubuqm
vsubeuqm
vsubcuq
vsubecuq
In addition to adding the instructions themselves, it also adds support for the
v1i128 type for intrinsics (Intrinsics.td, Function.cpp, and
IntrinsicEmitter.cpp).
http://reviews.llvm.org/D9081
llvm-svn: 238144
The raw non-instruction/constant form of this is still relying on being
able to access the pointee type from a pointer type - those will be
cleaned up later. For now, just focus on the cases where the pointee
type is easily accessible.
llvm-svn: 237958
so DWARF skeleton CUs can be expression in IR. A skeleton CU is a
(typically empty) DW_TAG_compile_unit that has a DW_AT_(GNU)_dwo_name and
a DW_AT_(GNU)_dwo_id attribute. It is used to refer to external debug info.
This is a prerequisite for clang module debugging as discussed in
http://lists.cs.uiuc.edu/pipermail/cfe-dev/2014-November/040076.html.
In order to refer to external types stored in split DWARF (dwo) objects,
such as clang modules, we need to emit skeleton CUs, which identify the
dwarf object (i.e., the clang module) by filename (the SplitDebugFilename)
and a hash value, the dwo_id.
This patch only contains the IR changes. The idea is that a CUs with a
non-zero dwo_id field will be emitted together with a DW_AT_GNU_dwo_name
and DW_AT_GNU_dwo_id attribute.
http://reviews.llvm.org/D9488
rdar://problem/20091852
llvm-svn: 237949
Now that Intrinsic::ID is a typed enum, we can forward declare it and so return it from this method.
This updates all users which were either using an unsigned to store it, or had a now unnecessary cast.
llvm-svn: 237810
Summary:
Introduce dereferenceable, dereferenceable_or_null metadata for loads
with the same semantic as corresponding attributes.
This patch depends on http://reviews.llvm.org/D9253
Patch by Artur Pilipenko!
Reviewers: hfinkel, sanjoy, reames
Reviewed By: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9365
llvm-svn: 237720
On 64-bit targets, Function has 4-bytes of padding in its struct layout.
This uses the space for the intrinsic ID. It is set and recalculated whenever the function name is set. This is similar to the current behavior which clears the function from the intrinsic ID cache when its renamed.
The intrinsic cache itself is removed as the only purpose was to speedup calls to getIntrinsicID() which now just reading the new field in the struct.
Reviewed by Duncan. http://reviews.llvm.org/D9836
llvm-svn: 237642
Summary:
Added isLoadableOrStorableType to PointerType.
We were doing some checks in some places, occasionally assert()ing instead
of telling the caller. With this patch, I'm putting all type checking in
the same place for load/store type instructions, and verifying the same
thing every time.
I also added a check for load/store of a function type.
Applied extracted check to Load, Store, and Cmpxcg.
I don't have exhaustive tests for all of these, but all Error() calls in
TypeCheckLoadStoreInst are being tested (in invalid.test).
Reviewers: dblaikie, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9785
llvm-svn: 237619
Summary: Add an assertion in verifier.cpp to make sure gc_relocate relocate a gc pointer, and its return type has the same address space with the relocated pointer.
Reviewers: reames, AndyAyers, sanjoy, pgavlin
Reviewed By: pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9695
llvm-svn: 237605
Summary:
This is a pass for speculative execution of instructions for simple if-then (triangle) control flow. It's aimed at GPUs, but could perhaps be used in other contexts. Enabling this pass gives us a 1.0% geomean improvement on Google benchmark suites, with one benchmark improving 33%.
Credit goes to Jingyue Wu for writing an earlier version of this pass.
Patched by Bjarke Roune.
Test Plan:
This patch adds a set of tests in test/Transforms/SpeculativeExecution/spec.ll
The pass is controlled by a flag which defaults to having the pass not run.
Reviewers: eliben, dberlin, meheff, jingyue, hfinkel
Reviewed By: jingyue, hfinkel
Subscribers: majnemer, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9360
llvm-svn: 237459
Summary:
This adds three Function methods to handle function entry counts:
setEntryCount() and getEntryCount().
Entry counts are stored under the MD_prof metadata node with the name
"function_entry_count". They are unsigned 64 bit values set by profilers
(instrumentation and sample profiler changes coming up).
Added documentation for new profile metadata and tests.
Reviewers: dexonsmith, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9628
llvm-svn: 237260
Summary:
This change adds two new parameters to the statepoint intrinsic, `i64 id`
and `i32 num_patch_bytes`. `id` gets propagated to the ID field
in the generated StackMap section. If the `num_patch_bytes` is
non-zero then the statepoint is lowered to `num_patch_bytes` bytes of
nops instead of a call (the spill and reload code remains unchanged).
A non-zero `num_patch_bytes` is useful in situations where a language
runtime requires complete control over how a call is lowered.
This change brings statepoints one step closer to patchpoints. With
some additional work (that is not part of this patch) it should be
possible to get rid of `TargetOpcode::STATEPOINT` altogether.
PlaceSafepoints generates `statepoint` wrappers with `id` set to
`0xABCDEF00` (the old default value for the ID reported in the stackmap)
and `num_patch_bytes` set to `0`. This can be made more sophisticated
later.
Reviewers: reames, pgavlin, swaroop.sridhar, AndyAyers
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9546
llvm-svn: 237214
We already had a method to iterate over all the incoming values of a PHI. This just changes all eligible code to use it.
Ineligible code included anything which cared about the index, or was also trying to get the i'th incoming BB.
llvm-svn: 237169
Summary:
This patch is to rename some variables to CamelCase in gc_relocate
related functions. There is no functionality change.
Patch by Chen Li!
Reviewers: reames, AndyAyers, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9681
llvm-svn: 237069
Summary:
In RewriteStatepointsForGC pass, we create a gc_relocate intrinsic for
each relocated pointer, and the gc_relocate has the same type with the
pointer. During the creation of gc_relocate intrinsic, llvm requires to
mangle its type. However, llvm does not support mangling of all possible
types. RewriteStatepointsForGC will hit an assertion failure when it
tries to create a gc_relocate for pointer to vector of pointers because
mangling for vector of pointers is not supported.
This patch changes the way RewriteStatepointsForGC pass creates
gc_relocate. For each relocated pointer, we erase the type of pointers
and create an unified gc_relocate of type i8 addrspace(1)*. Then a
bitcast is inserted to convert the gc_relocate to the correct type. In
this way, gc_relocate does not need to deal with different types of
pointers and the unsupported type mangling is no longer a problem. This
change would also ease further merge when LLVM erases types of pointers
and introduces an unified pointer type.
Some minor changes are also introduced to gc_relocate related part in
InstCombineCalls, CodeGenPrepare, and Verifier accordingly.
Patch by Chen Li!
Reviewers: reames, AndyAyers, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9592
llvm-svn: 237009
Author: dblaikie
Date: Fri May 8 17:47:50 2015
New Revision: 236912
URL: http://llvm.org/viewvc/llvm-project?rev=236912&view=rev
Log:
[opaque pointer type] Cleanup a few references to pointee types using nearby non-pointee types of the same value
& cleanup a convoluted return expression while I'm here
llvm-svn: 236919
This changes the shape of the statepoint intrinsic from:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 unused, ...call args, i32 # deopt args, ...deopt args, ...gc args)
to:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 flags, ...call args, i32 # transition args, ...transition args, i32 # deopt args, ...deopt args, ...gc args)
This extension offers the backend the opportunity to insert (somewhat) arbitrary code to manage the transition from GC-aware code to code that is not GC-aware and back.
In order to support the injection of transition code, this extension wraps the STATEPOINT ISD node generated by the usual lowering lowering with two additional nodes: GC_TRANSITION_START and GC_TRANSITION_END. The transition arguments that were passed passed to the intrinsic (if any) are lowered and provided as operands to these nodes and may be used by the backend during code generation.
Eventually, the lowering of the GC_TRANSITION_{START,END} nodes should be informed by the GC strategy in use for the function containing the intrinsic call; for now, these nodes are instead replaced with no-ops.
Differential Revision: http://reviews.llvm.org/D9501
llvm-svn: 236888
Clang regressions were caused by more stringent assertion checking
introduced by this change. Small fix needed to clang has been committed
in r236751.
llvm-svn: 236752
Added intrinsics for the instructions. CC parameter of the intrinsics was changed from i8 to i32 according to the spec.
By Igor Breger (igor.breger@intel.com)
llvm-svn: 236714
options.
This commit fixes a bug in llc and opt where "-mcpu" and "-mattr" wouldn't
override function attributes "-target-cpu" and "-target-features" in the IR.
Differential Revision: http://reviews.llvm.org/D9537
llvm-svn: 236677
Renames the original CreateGCStatepoint to CreateGCStatepointCall, and
moves invoke creating functionality from PlaceSafepoints.cpp to
IRBuilder.cpp.
This changes the labels generated for PlaceSafepoints/invokes.ll so use
a regex there to make the basic block labels more resilient.
llvm-svn: 236672
This makes use of the new API which can remove attributes from a set given a builder.
This is much faster than creating a temporary set and reduces llc time by about 0.3% which was all spent creating temporary attributes sets on the context.
llvm-svn: 236668
Prior to this change we would have to construct a temporary AttributeSet (which isn't temporary at all given that its allocated on the context), just to contain the attributes in the builder, then call remove on that.
Now we can just remove any attributes from the (lightweight and really temporary) builder itself.
Will be used in a future commit to remove some temporary attributes sets.
llvm-svn: 236666
I folded the check for the flag -verify-dom-info into the only caller
where I think it is supposed to be checked: verifyAnalysis. (The idea
of the flag is to enable this expensive verification in
verifyPreservedAnalysis.)
I'm assuming that when manually scheduling the verification pass
with -passes=verify<domtree>, we do want to perform the verification.
llvm-svn: 236575
Many of the callers already have the pointer type anyway, and for the
couple of callers that don't it's pretty easy to call PointerType::get
on the pointee type and address space.
This avoids LLParser from using PointerType::getElementType when parsing
GlobalAliases from IR.
llvm-svn: 236160
The clang frontend helps out GDB by emitting the members of local anonymous
unions as artificial local variables with shared storage. When SROA splits
the storage for artificial local variables that are smaller than the entire
union, the overhang piece will be outside of the allotted space for the
variable and this check fails.
rdar://problem/20730771
llvm-svn: 236124
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
Support up to 2^16 arguments to a function. If we do hit the limit,
assert out rather than restarting at 0 as we've done historically.
This fixes PR23332. A clang test will follow.
llvm-svn: 235955
Summary:
This patch adds constant folding of insertelement instruction to undef value when index operand is constant and is not less than vector size or is undef.
InstCombine does not support this case, but I'm happy to add it there also if this change is accepted.
Test Plan: Unittests and regression tests for ConstProp pass.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9287
llvm-svn: 235854
Add serialization support for function metadata attachments (added in
r235783). The syntax is:
define @foo() !attach !0 {
Metadata attachments are only allowed on functions with bodies. Since
they come before the `{`, they're not really part of the body; since
they require a body, they're not really part of the header. In
`LLParser` I gave them a separate function called from `ParseDefine()`,
`ParseOptionalFunctionMetadata()`.
In bitcode, I'm using the same `METADATA_ATTACHMENT` record used by
instructions. Instruction metadata attachments are included in a
special "attachment" block at the end of a `Function`. The attachment
records are laid out like this:
InstID (KindID MetadataID)+
Note that these records always have an odd number of fields. The new
code takes advantage of this to recognize function attachments (which
don't need an instruction ID):
(KindID MetadataID)+
This means we can use the same attachment block already used for
instructions.
This is part of PR23340.
llvm-svn: 235785
Add a verifier check that only functions with bodies have metadata
attachments. This should help catch bugs in frontends and
transformation passes. Part of PR23340.
llvm-svn: 235784
Add IR support for `Metadata` attachments. Assembly and bitcode support
will follow shortly, but for now we just have unit tests. This is part
of PR23340.
llvm-svn: 235783
Parameterize the separator for attachments, since `Function` metadata
attachments (PR23340) aren't going to use a `,` (comma). No real
functionality change.
llvm-svn: 235775
Collect metadata names once per `AssemblyWriter` instead of every time
we need to print some attachments. Just a drive-by; this caught my eye
while I was refactoring the code in r235772.
llvm-svn: 235774
Make room for more than just `Function::isMaterializable()` in the
`GlobalObject` subclass data bitfield. Since we're treating it like a
bitfield, change `Function::Function()` to zero-out the whole thing.
llvm-svn: 235770
Extract the set logic for metadata attachments from `Instruction` so it
can be reused for `Function` (PR23340).
This data structure makes a `SmallVector<>` look (a little) like a map,
just doing the bare minimum to support the `Instruction` (and soon,
`Function`) metadata API.
llvm-svn: 235769
Technically the operations are different -- the old logic moved items
from the back into the opened-up slots, instead of the usual
`remove_if()` logic of a slow and a fast iterator -- but unless a
profile tells us otherwise I prefer the simpler logic here. Regardless,
there shouldn't be an observable function change.
llvm-svn: 235767
Same as r235145 for the call instruction - the justification, tradeoffs,
etc are all the same. The conversion script worked the same without any
false negatives (after replacing 'call' with 'invoke').
llvm-svn: 235755
Summary: Constant folding of extractelement with out-of-bound index produces undef also for indexes bigger than 64bit (instead of crash assert failure as before)
Test Plan: Unit tests included.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9225
llvm-svn: 235700
(reverted in r235533)
Original commit message:
"Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)"
The remapping done in ValueMapper for LTO was insufficient as the types
weren't correctly mapped (though I was using the post-mapped operands,
some of those operands might not have been mapped yet so the type
wouldn't be post-mapped yet). Instead use the pre-mapped type and
explicitly map all the types.
llvm-svn: 235651
Move isDereferenceablePointer function to Analysis. This function recursively tracks dereferencability over a chain of values like other functions in ValueTracking.
This refactoring is motivated by further changes to support dereferenceable_or_null attribute (http://reviews.llvm.org/D8650). isDereferenceablePointer will be extended to perform context-sensitive analysis and IR is not a good place to have such functionality.
Patch by: Artur Pilipenko <apilipenko@azulsystems.com>
Differential Revision: reviews.llvm.org/D9075
llvm-svn: 235611
This reverts commit r235458.
It looks like this might be breaking something LTO-ish. Looking into it
& will recommit with a fix/test case/etc once I've got more to go on.
llvm-svn: 235533
Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)
llvm-svn: 235458
Remove the `DIArray` and `DITypeArray` typedefs, preferring the
underlying types (`DebugNodeArray` and `MDTypeRefArray`, respectively).
llvm-svn: 235413
Stop using `DIDescriptor` and its subclasses in the `DebugInfoFinder`
API, as well as the rest of the API hanging around in `DebugInfo.h`.
llvm-svn: 235240
The implementation of this GEP::getResultElementType will be refactored
to either rely on a member variable, or recompute the value from the
indicies (any preferences?).
llvm-svn: 235236
Now (with a few carefully placed suppressions relating to general type
serialization, etc) we can round trip a simple load through bitcode and
textual IR without calling getElementType on a PointerType.
llvm-svn: 235221
The v1i128 type is needed for the quadword add/substract instructions introduced
in POWER8. Futhermore, the PowerPC ABI specifies that parameters of type v1i128
are to be passed in a single vector register, while parameters of type i128 are
passed in pairs of GPRs. Thus, it is necessary to be able to differentiate
between v1i128 and i128 in LLVM.
http://reviews.llvm.org/D8564
llvm-svn: 235198
The i128 type is needed as a builtin type in order to support the v1i128 vector
type. The PowerPC ABI requires that the i128 and v1i128 types are handled
differently when passed as parameters to functions (i128 is passed in pairs of
GPRs, v1i128 is passed in a single vector register).
http://reviews.llvm.org/D8564
llvm-svn: 235196
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
Summary:
If a pointer is marked as dereferenceable_or_null(N), LLVM assumes it
is either `null` or `dereferenceable(N)` or both. This change only
introduces the attribute and adds a token test case for the `llvm-as`
/ `llvm-dis`. It does not hook up other parts of the optimizer to
actually exploit the attribute -- those changes will come later.
For pointers in address space 0, `dereferenceable(N)` is now exactly
equivalent to `dereferenceable_or_null(N)` && `nonnull`. For other
address spaces, `dereferenceable(N)` is potentially weaker than
`dereferenceable_or_null(N)` && `nonnull` (since we could have a null
`dereferenceable(N)` pointer).
The motivating case for this change is Java (and other managed
languages), where pointers are either `null` or dereferenceable up to
some usually known-at-compile-time constant offset.
Reviewers: rafael, hfinkel
Reviewed By: hfinkel
Subscribers: nicholas, llvm-commits
Differential Revision: http://reviews.llvm.org/D8650
llvm-svn: 235132
As a step toward killing `DIDescriptor` and its subclasses, remove it
from the `DIBuilder` API. Replace the subclasses with appropriate
pointers from the new debug info hierarchy. There are a couple of
possible surprises in type choices for out-of-tree frontends:
- Subroutine types: `MDSubroutineType`, not `MDCompositeTypeBase`.
- Composite types: `MDCompositeType`, not `MDCompositeTypeBase`.
- Scopes: `MDScope`, not `MDNode`.
- Generic debug info nodes: `DebugNode`, not `MDNode`.
This is part of PR23080.
llvm-svn: 235111
Delete `DIRef<>`, and replace the remaining uses of it with
`TypedDebugNodeRef<>`. To minimize code churn, I've added typedefs from
`MDTypeRef` to `DITypeRef` (etc.).
llvm-svn: 235071
PR23080 is almost finished. With this commit, there's no consequential
API in `DIDescriptor` and its subclasses. What's left?
- Default-constructed to `nullptr`.
- Handy `const_cast<>` (constructed from `const`, but accessors are
non-`const`).
I think the safe way to catch those is to delete the classes and fix
compile errors. That'll be my next step, after I delete the `DITypeRef`
(etc.) wrapper around `MDTypeRef`.
llvm-svn: 235069
Continuing PR23080, gut `DIType` and its various subclasses, leaving
behind thin wrappers around the pointer types in the new debug info
hierarchy.
llvm-svn: 235064
Remove 'inlinedAt:' from MDLocalVariable. Besides saving some memory
(variables with it seem to be single largest `Metadata` contributer to
memory usage right now in -g -flto builds), this stops optimization and
backend passes from having to change local variables.
The 'inlinedAt:' field was used by the backend in two ways:
1. To tell the backend whether and into what a variable was inlined.
2. To create a unique id for each inlined variable.
Instead, rely on the 'inlinedAt:' field of the intrinsic's `!dbg`
attachment, and change the DWARF backend to use a typedef called
`InlinedVariable` which is `std::pair<MDLocalVariable*, MDLocation*>`.
This `DebugLoc` is already passed reliably through the backend (as
verified by r234021).
This commit removes the check from r234021, but I added a new check
(that will survive) in r235048, and changed the `DIBuilder` API in
r235041 to require a `!dbg` attachment whose 'scope:` is in the same
`MDSubprogram` as the variable's.
If this breaks your out-of-tree testcases, perhaps the script I used
(mdlocalvariable-drop-inlinedat.sh) will help; I'll attach it to PR22778
in a moment.
llvm-svn: 235050
Before we start to rely on valid `!dbg` attachments, add a check to the
verifier that `@llvm.dbg.*` intrinsics always have one. Also check that
the `scope:` fields point at the same `MDSubprogram`.
This is in the context of PR22778. The check that the `inlinedAt:`
fields agree has baked for a while (since r234021), so I'll kill [1] the
`MDLocalVariable::getInlinedAt()` field soon.
[1]: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150330/269387.html
Unfortunately, that means it's impossible to keep the current `Verifier`
checks, which rely on comparing `inlinedAt:` fields. We'll be able to
keep the checks I'm adding here.
If this breaks your out-of-tree testcases, the upgrade script
(add-dbg-to-intrinsics.sh) attached to PR22778 that I used for r235040
might fix them for you.
llvm-svn: 235048
Change `DIBuilder::insertDeclare()` and `insertDbgValueIntrinsic()` to
take an `MDLocation*`/`DebugLoc` parameter which it attaches to the
created intrinsic. Assert at creation time that the `scope:` field's
subprogram matches the variable's. There's a matching `clang` commit to
use the API.
The context for this is PR22778, which is removing the `inlinedAt:`
field from `MDLocalVariable`, instead deferring to the `!dbg` location
attached to the debug info intrinsic. The best way to ensure we always
have a `!dbg` attachment is to require one at creation time. I'll be
adding verifier checks next, but this API change is the best way to
shake out frontend bugs.
Note: I added an `llvm_unreachable()` in `bindings/go` and passed in
`nullptr` for the `DebugLoc`. The `llgo` folks will eventually need to
pass a valid `DebugLoc` here.
llvm-svn: 235041
Remove all the global bits to do with preserving use-list order by
moving the `cl::opt`s to the individual tools that want them. There's a
minor functionality change to `libLTO`, in that you can't send in
`-preserve-bc-uselistorder=false`, but making that bit settable (if it's
worth doing) should be through explicit LTO API.
As a drive-by fix, I removed some includes of `UseListOrder.h` that were
made unnecessary by recent commits.
llvm-svn: 234973
Pull the `-preserve-ll-uselistorder` bit up through all the callers of
`Module::print()`. I converted callers of `operator<<` to
`Module::print()` where necessary to pull the bit through.
llvm-svn: 234968
For consistency, start pulling out `-preserve-ll-uselistorder`. I'll
drop the global state for both eventually. This pulls it up to
`Module::print()` (but not past there).
llvm-svn: 234966
The testcase that is included in the patch caused a crash when doing DebugInfoFinder::processModule
on the module due to DCT->getElements() returning nullptr in DebugInfoFinder::processType.
By doing "DCT->getElements()" instead of "DCT->getElements()->operands()" one gets a DIArray
instead of a raw MDTuple. The former has code to handle null as a 0-element array and
therefore avoids the crash.
Differential Revision: http://reviews.llvm.org/D9008
llvm-svn: 234875
Change `DICompileUnit::replaceSubprograms()` and
`DICompileUnit::replaceGlobalVariables()` to match the `MDCompileUnit`
equivalents that they're wrapping.
llvm-svn: 234852
Gut the `DIDescriptor` wrappers around `MDLocalScope` subclasses. Note
that `DILexicalBlock` wraps `MDLexicalBlockBase`, not `MDLexicalBlock`.
llvm-svn: 234850
Gut all the non-pointer API from the variable wrappers, except an
implicit conversion from `DIGlobalVariable` to `DIDescriptor`. Note
that if you're updating out-of-tree code, `DIVariable` wraps
`MDLocalVariable` (`MDVariable` is a common base class shared with
`MDGlobalVariable`).
llvm-svn: 234840
This is along the same lines as r234832, but for `DILocation`. Clean
out all accessors from `DILocation`. Any callers should be using
`MDLocation` directly (e.g., via `operator->()`).
llvm-svn: 234835
As documented in PR23200 (and the FIXMEs I've added to the code here),
this logic is fairly broken: it modifies the `LLVMContext` in a way that
affects other modules and cannot be serialized to assembly/bitcode. For
now, move it over to `MDLocation::computeNewDiscriminators()` anyway.
llvm-svn: 234825
I don't see a reason to add the `copyWithNewScope()` API over to
`MDLocation` -- it seems to be a holdover from when creating locations
required knowing details of operand layout -- so change
`AddDiscriminators` to call `MDLocation::get()` directly. Should be no
functionality change here.
llvm-svn: 234824
Instead of calling the somewhat confusingly-named
`DIVariable::isInlinedFnArgument()`, do the check directly here.
There's possibly a small functionality change here: instead of
`dyn_cast<>`'ing `DV->getScope()` to `MDSubprogram`, I'm looking up the
scope chain for the actual subprogram. I suspect that this is a no-op
for function arguments so in practise there isn't a real difference.
I've also added a `FIXME` to check the `inlinedAt:` chain instead, since
I wonder if that would be more reliable than the
`MDSubprogram::describes()` function.
Since this was the only user of `DIVariable::isInlinedFnArgument()`,
delete it.
llvm-svn: 234799
`DIGlobalVariable::getGlobal()` isn't really helpful, it just does a
`dyn_cast_or_null<>`. Simplify its only user by doing the cast directly
and delete the code.
llvm-svn: 234796
I don't really like this function at all -- I think it should be as
simple as `return getFunction() == F` -- but for now this seems like the
best we can do.
llvm-svn: 234778
This reverts commit r234717, reapplying r234698 (in spirit).
As described in r234717, the original `Verifier` check had a
use-after-free. Instead of storing pointers to "interesting" debug info
intrinsics whose bit piece expressions should be verified once we have
typerefs, do a second traversal. I've added a testcase to catch the
`llc` crasher.
Original commit message:
Verifier: Check for incompatible bit piece expressions
Convert an assertion into a `Verifier` check. Bit piece expressions
must fit inside the variable, and mustn't be the entire variable.
Catching this in the verifier will help us find bugs sooner, and makes
`DIVariable::getSizeInBits()` dead code.
llvm-svn: 234776
This reverts commit r234698.
This caused a use-after-free: `QueuedBitPieceExpressions` holds onto
references to `DbgInfoIntrinsic`s and references them past where they're
deleted (this is because the verifier is run as a function pass, and
then `verifyTypeRefs()` is called during `doFinalization()`).
I'll include a reduced crasher for `llc` when I recommit the check.
llvm-svn: 234717
Change `MDSubprogram::getFunction()` and
`MDGlobalVariable::getConstant()` to return a `Constant`. Previously,
both returned `ConstantAsMetadata`.
llvm-svn: 234699
Convert an assertion into a `Verifier` check. Bit piece expressions
must fit inside the variable, and mustn't be the entire variable.
Catching this in the verifier will help us find bugs sooner, and makes
`DIVariable::getSizeInBits()` dead code.
llvm-svn: 234698
r234696 replaced the only use of `DIDescriptor::replaceAllUsesWith()`
with `DIBuilder::replaceTemporary()` (added in r234695). Delete the
dead code.
llvm-svn: 234697
Continue gutting the `DIDescriptor` hierarchy. In this case, move the
guts of `DIScope::getName()` and `DIScope::getContext()` to
`MDScope::getName()` and `MDScope::getScope()`.
llvm-svn: 234691
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
llvm-svn: 234679
Add forwarding `getFilename()` and `getDirectory()` accessors to nodes
in the new hierarchy that define a `getFile()`. Use that to
re-implement existing functionality in the `DIDescriptor` hierarchy.
llvm-svn: 234671
Stop leaking temporary nodes from `DIBuilder::createCompileUnit()`.
`replaceAllUsesWith()` doesn't delete the nodes, so we need to delete
them "manually" (well, `TempMDTuple` does that for us).
Similarly, stop leaking the temporary nodes used for variables of
subprograms.
llvm-svn: 234617
CallSite roughly behaves as a common base CallInst and InvokeInst. Bring
the behavior closer to that model by making upcasts explicit. Downcasts
remain implicit and work as before.
Following dyn_cast as a mental model checking whether a Value *V isa
CallSite now looks like this:
if (auto CS = CallSite(V)) // think dyn_cast
instead of:
if (CallSite CS = V)
This is an extra token but I think it is slightly clearer. Making the
ctor explicit has the advantage of not accidentally creating nullptr
CallSites, e.g. when you pass a Value * to a function taking a CallSite
argument.
llvm-svn: 234601
Pull the `-preserve-*-use-list-order` flags out of "experimental" mode,
and preserve use-list order by default when serializing to bitcode.
llvm-svn: 234510
This reverts commit r234329, which insufficiently appeased older
`clang`s (apparently that wasn't the only call site). r234331 was a
more complete fix.
llvm-svn: 234333
A bot is failing [1] after r234326, apparently because this code doesn't
do what I think it should:
template <class U>
explicit MDTupleTypedArrayWrapper(
const U &Tuple,
typename std::enable_if<
std::is_constructible<const MDTuple *, U>::value>::type * = nullptr)
: N(Tuple) {}
Just be explicit for now.
[1]: http://lab.llvm.org:8080/green/job/clang-stage1-cmake-RA-incremental_build/8201/
llvm-svn: 234329
Replace all uses of `DITypedArray<>` with `MDTupleTypedArrayWrapper<>`
and `MDTypeRefArray`. The APIs are completely different, but the
provided functionality is the same: treat an `MDTuple` as if it's an
array of a particular element type.
To simplify this patch a bit, I've temporarily typedef'ed
`DebugNodeArray` to `DIArray` and `MDTypeRefArray` to `DITypeArray`.
I've also temporarily conditionalized the accessors to check for null --
eventually these should be changed to asserts and the callers should
check for null themselves.
There's a tiny accompanying patch to clang.
llvm-svn: 234290
Remove special iterators from `DIExpression` in favour of same in
`MDExpression`. There should be no functionality change here.
Note that the APIs are slightly different: `getArg(unsigned)` counts
from 0, not 1, in the `MDExpression` version of the iterator.
llvm-svn: 234285
`DIDescriptor`'s subclasses allow construction from incompatible
pointers, and `DIDescriptor` defines a series of `isa<>`-like functions
(e.g., `isCompileUnit()` instead of `isa<MDCompileUnit>()`) that clients
tend to use like this:
if (DICompileUnit(N).isCompileUnit())
foo(DICompileUnit(N));
These construction patterns work together to make `DIDescriptor` behave
differently from normal pointers.
Instead, use built-in `isa<>`, `dyn_cast<>`, etc., and only build
`DIDescriptor`s from pointers that are valid for their type.
I've split this into a few commits for different parts of LLVM and clang
(to decrease the patch size and increase the chance of review).
Generally the changes I made were NFC, but in a few places I made things
stricter if it made sense from the surrounded code.
Eventually a follow-up commit will remove the API for the "old" way.
llvm-svn: 234255
Gut `DIRef<>::resolve()`, reimplementing it using
`TypedDebugNodeRef<>::resolve()`. Use three separate functions rather
than some sort of type traits, since the latter (i.e., mapping `DIScope`
=> `MDScope`) seems heavy-handed. I don't expect `DIRef<>` to last much
longer in tree anyway.
As a drive-by fix, make `TypedDebugNodeRef<>::resolve()` do the right
thing with `nullptr`.
llvm-svn: 234248
Remove `DILexicalBlockFile::getScope()` (whose last use was removed from
clang in r234245), which illegally returned a `DILexicalBlock` despite
its scope sometimes being an `MDSubprogram`. Also remove the
`getLineNumber()` and `getColumnNumber()` methods that just forwarded to
`DILexicalBlock`'s versions, since there don't seem to be any callers.
Note that the block of code removed from `DebugInfo.cpp` was actually
dead code, since `isLexicalBlock()` (the previous branch) always returns
true when `isLexicalBlockFile()` returns true.
An earlier (broken and untested) version of this was squashed into
r234222 and reverted in r234225.
llvm-svn: 234246
A few calls are left in for error checking - but I'm commenting those
out & trying to build some IR tests (aiming for Argument Promotion to
start with). When I get any of these tests passing I may add flag to
disable the checking so I can add tests that pass with the assertion in
place.
llvm-svn: 234206
Remove `DIDescriptor::Verify()` and the `Verify()`s from subclasses.
They had already been gutted, and just did an `isa<>` check.
In a couple of cases I've temporarily dropped the check entirely, but
subsequent commits are going to disallow conversions to the
`DIDescriptor`s directly from `MDNode`, so the checks will come back in
another form soon enough.
llvm-svn: 234201
Use `MDTypeRef` (etc.) in the new debug info hierarchy rather than raw
`Metadata *` pointers.
I rolled in a change to `DIBuilder` that looks unrelated: take `DIType`
instead of `DITypeRef` as type arguments when creating variables.
However, this was the simplest way to use `MDTypeRef` within the
functions, and didn't require any cleanups from callers in clang (since
they were all passing in `DIType`s anyway, relying on their implicit
conversions to `DITypeRef`).
llvm-svn: 234197
Add `MDTupleTypedArrayWrapper`, a wrapper around `MDTuple` that adapts
it to look like an array and cast its operands to the given type. This
is designed to be a replacement for `DITypedArray<>`, which is in the
`DIDescriptor` hierarchy.
llvm-svn: 234183
This upgrade of `@llvm.dbg.declare` and `@llvm.dbg.value` isn't useful,
since it's for an old debug info version. The calls will get stripped
anyway by `UpgradeDebugInfo()`.
llvm-svn: 234181
Add missing checks for `templateParams:` in `MDCompositeType`. Pull the
current check for `MDSubprogram` to reduce duplicated code and fix it up
to print a good message when the immediate operand isn't an `MDTuple`
(as a drive-by, make the same fix to `variables:` in `MDSubprogram`).
llvm-svn: 234177
There's still lots of callers passing nullptr, of course - some because
they'll never be migrated (InstCombines for bitcasts - well they don't
make any sense when the pointer type is opaque anyway, for example) and
others that will need more engineering to pass Types around.
llvm-svn: 234126
We don't need to represent UnwindHelp in IR. Instead, we can use the
knowledge that we are emitting the parent function to decide if we
should create the UnwindHelp stack object.
llvm-svn: 234061
Check that the `MDLocalVariable::getInlinedAt()` in a debug info
intrinsic's variable always matches the `MDLocation::getInlinedAt()` of
its `!dbg` attachment.
The goal here is to get rid of `MDLocalVariable::getInlinedAt()`
entirely (PR22778), since it's expensive and unnecessary, but I'll let
this verifier check bake for a while (a week maybe?) first. I've
updated the testcases that had the wrong value for `inlinedAt:`.
This checks that things are sane in the IR, but currently things go out
of whack in a few places in the backend. I'll follow shortly with
assertions in the backend (with code fixes).
If you have out-of-tree testcases that just started failing, here's how
I updated these ones:
1. The verifier check gives you the basic block, function, instruction,
and relevant metadata arguments (metadata numbering doesn't
necessarily match the source file, unfortunately).
2. Look at the `@llvm.dbg.*()` instruction, and compare the
`inlinedAt:` fields of the variable argument (second `metadata`
argument) and the `!dbg` attachment.
3. Figure out based on the variable `scope:` chain and the functions in
the file whether the variable has been inlined (and into what), so
you can determine which `inlinedAt:` is actually correct. In all of
the in-tree testcases, the `!MDLocation()` was correct and the
`!MDLocalVariable()` was wrong, but YMMV.
4. Duplicate the metadata that you're going to change, and add/drop the
`inlinedAt:` field from one of them. Be careful that the other
references to the same metadata node point at the correct one.
llvm-svn: 234021
Summary:
Same as the last patch, but for BasicBlock
(Requires same code movement)
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8801
llvm-svn: 233992
This makes it possible to use the same representation of llvm.eh.actions
in outlined handlers as we use in the parent function because i32's are
just constants that can be copied freely between functions.
I had to add a sentinel alloca to the list of child allocas so that we
don't try to sink the catch object into the handler. Normally, one would
use nullptr for this kind of thing, but TinyPtrVector doesn't support
null elements. More than that, it's elements have to have a suitable
alignment. Therefore, I settled on this for my sentinel:
AllocaInst *getCatchObjectSentinel() {
return static_cast<AllocaInst *>(nullptr) + 1;
}
llvm-svn: 233947
Require the pointee type to be passed explicitly and assert that it is
correct. For now it's possible to pass nullptr here (and I've done so in
a few places in this patch) but eventually that will be disallowed once
all clients have been updated or removed. It'll be a long road to get
all the way there... but if you have the cahnce to update your callers
to pass the type explicitly without depending on a pointer's element
type, that would be a good thing to do soon and a necessary thing to do
eventually.
llvm-svn: 233938
This lets us catch exceptions in simple cases.
N.B. Things that do not work include (but are not limited to):
- Throwing from within a catch handler.
- Catching an object with a named catch parameter.
- 'CatchHigh' is fictitious, we aren't sure of its purpose.
- We aren't entirely efficient with regards to the number of EH states
that we generate.
- IP-to-State tables are sensitive to the order of emission.
llvm-svn: 233767
Uniqued nodes have more complete registration with
`ReplaceableMetadataImpl` so that they can update themselves when
operands change. Fix a bug where `MDNode::replaceWithUniqued()` wasn't
enabling these callbacks.
The two most obvious ways missing callbacks causes problems is that
auto-resolution fails and re-uniquing (on changed operands) just doesn't
happen. I've added tests for both -- in both cases, I confirmed that
the final check was failing before the fix.
rdar://problem/20365935
llvm-svn: 233751
We'll no longer crash in the `verifyTypeRefs()` (used to be called
`verifyDebugInfo()`), so there's no reason to return early here. Remove
the `EverBroken` member since this was the only use!
llvm-svn: 233665
`verifyDebugInfo()` was doing two things:
- Asserting on unresolved type references.
- Calling `Verify()` functions for various types of debug info.
The `Verify()` functions have been gutted, so rename the function to
`verifyTypeRefs()` and explicitly check those. Instead of assertions,
we get nice error messages now.
llvm-svn: 233664
Move over the remaining (somewhat complicated) check from
`DISubprogram::Verify()`. I suspect this check could be optimized --
e.g., it would be nice not to do another full traversal here -- but it's
not exactly obvious how. For now, just bring it over as is.
Once we have a better model for the "canonical" subprogram of a
`Function`, we should enforce that all `!dbg` attachments lead to the
canonical one.
llvm-svn: 233663
Simplify implementation of `llvm::getDISubprogram()`. I might go
through and see how difficult it is to update the users, since this
function doesn't really seem necessary anymore.
llvm-svn: 233662
Most of these checks were already in the `Verifier` so this is more of a
cleanup. Now almost everything is over there.
Now that require a `name:` for `MDGlobalVariable`, add a check in
`LLParser` for it.
llvm-svn: 233657
Move over some more checks from `DIDescriptor::Verify()`, and change
`LLParser` to require non-null `file:` fields in compile units.
I've ignored the comment in test/Assembler/metadata-null-operands.ll
since I disagree with it. At the time that test was written (r229960),
the debug info verifier wasn't on by default, so my comment there is in
the context of not expecting the verifier to be useful. It is now, and
besides that, since r233394 we can check when parsing textual IR whether
an operand is null that shouldn't be.
llvm-svn: 233654
The only user of `DebugLoc::getFromDILexicalBlock()` was creating a new
`MDLocation` as convenient API for passing an `MDScope`. Stop doing
that, and remove the API. If in the future we actually *want* to create
new DebugLocs, calling `MDLexicalBlock::get()` makes more sense.
llvm-svn: 233643
This pushes the use of PointerType::getElementType up into several
callers - I'll essentially just have to keep pushing that up the stack
until I can eliminate every call to it...
llvm-svn: 233604
Keep a note in the materializer that we are stripping debug info so that
user doing a lazy read of the module don't hit outdated formats.
Thanks to Duncan for suggesting the fix.
llvm-svn: 233603
Don't use `DebugLoc::getFnDebugLoc()`, which creates new `MDLocation`s,
in the backend. We just want to grab the subprogram here anyway.
llvm-svn: 233601
Remove old API for `DebugLoc` now that all the callers have been
updated. If this broke your out-of-tree build, here's a quick map from
the old API to the new one:
DebugLoc DebugLoc::getFromMDLocation(MDNode *)
=> DebugLoc::DebugLoc(MDLocation *)
=> explicit DebugLoc::DebugLoc(MDNode *) // works with broken code
MDNode *DebugLoc::getAsMDNode(LLVMContext &)
=> MDLocation *DebugLoc::get()
=> DebugLoc::operator MDLocation *()
=> MDNode *DebugLoc::getAsMDNode() // works with broken code
bool DebugLoc::isUnknown()
=> DebugLoc::operator MDLocation *()
i.e.: if (MDLocation *DL = ...)
=> DebugLoc::operator bool() // works with broken code
i.e.: if (DebugLoc DL = ...)
void DebugLoc::getScopeAndInlinedAt(MDNode *&, MDNode *&)
=> use: MDNode *DebugLoc::getScope()
and: MDLocation *DebugLoc::getInlinedAt()
MDNode *DebugLoc::getScopeNode(LLVMContext &)
=> MDNode *DebugLoc::getInlinedAtScope()
void DebugLoc::dump(LLVMContext &)
=> void DebugLoc::dump()
void DebugLoc::getFnDebugLoc(LLVMContext &)
=> void DebugLoc::getFnDebugLoc()
MDNode *DebugLoc::getScope(LLVMContext &)
=> MDNode *DebugLoc::getScope()
MDNode *DebugLoc::getInlinedAt(LLVMContext &)
=> MDLocation *DebugLoc::getInlinedAt()
I've noted above the only functions that won't crash on broken code (due
to downcasting to `MDLocation`). If your code could be dealing with
broken IR (i.e., you haven't run the verifier yet, or you've used a
temporary node that will eventually (but not yet) get RAUW'ed to an
`MDLocation`), you need to restrict yourself to those.
llvm-svn: 233599
Update lib/IR and lib/Bitcode to use the new `DebugLoc` API. Added an
explicit conversion to `bool` (avoiding a conversion to `MDLocation`),
since a couple of these use cases need to handle broken code.
llvm-svn: 233585
Rewrite `DebugLoc` with a cleaner API that reflects its current status
as a wrapper around an `MDLocation` pointer.
- Add accessors/constructors to/from `MDLocation`.
- Simplify construction from `MDNode`.
- Remove unnecessary `LLVMContext` from APIs.
- Drop some API that isn't useful any more.
- Rewrite documentation.
Actually, I've left the old API behind temporarily at the bottom of the
class so that I can update callers in separate commits. I'll remove it
once the callers are updated.
llvm-svn: 233573
Write `MDLocation::getInlinedAtScope()` and use it to re-implement
`DebugLoc::getScopeNode()` (and simplify `DISubprogram::Verify()`).
This follows the inlined-at linked list and returns the scope of the
deepest/last location.
llvm-svn: 233568
Add operand checks for `MDLexicalBlock` and `MDLexicalBlockFile`. Like
`MDLocalVariable` and `MDLocation`, these nodes always require a scope.
There was no test bitrot to fix here (just updated the serialization
tests in test/Assembler/mdlexicalblock.ll).
llvm-svn: 233561
Check operands of `MDSubprogram`s in the verifier, and update the
accessors and factory functions to use more specific types.
There were a lot of broken testcases, which I fixed in r233466. If you
have out-of-tree tests for debug info, you probably need similar changes
to the ones I made there.
llvm-svn: 233559
PPC_FP128 is really the sum of two consecutive doubles, where the first double
is always stored first in memory, regardless of the target endianness. The
memory layout of i128, however, depends on the target endianness, and so we
can't fold this without target endianness information. As a result, we must not
do this folding in lib/IR/ConstantFold.cpp (it could be done instead in
Analysis/ConstantFolding.cpp, but that's not done now).
Fixes PR23026.
llvm-svn: 233481
Loosen one check from r233446: as long as `DIBuilder` requires a
non-null type for every subprogram, we should allow a null type array.
Also add tests for the rest of `MDSubroutineType`, which were somehow
missing.
llvm-svn: 233468
Add verify checks for `MDType` subclasses and for `MDCompileUnit`.
These new checks don't yet incorporate everything from `Verify()`, but
at least they sanity check the operands. Also downcast accessors as
possible.
A lot of these accessors can't be downcast as far as we'd like because
of arrays of typed objects (stored in a generic `MDTuple`) and
`MDString`-based type references. Eventually I'll port over `DIRef<>`
and `DITypedArray<>` from `DebugInfo.h` to clean those up as well.
Updated bitrotted testcases separately in r233415 and r233443 to reduce
churn on the off-chance this needs to be reverted.
llvm-svn: 233446
Change `LLParser` to require a non-null `scope:` field for both
`MDLocation` and `MDLocalVariable`. There's no need to wait for the
verifier for this check. This also allows their `::getImpl()` methods
to assert that the incoming scope is non-null.
llvm-svn: 233394
Check fields from `MDLocalVariable` and `MDGlobalVariable` and change
the accessors to downcast to the right types. `getType()` still returns
`Metadata*` since it could be an `MDString`-based reference.
Since local variables require non-null scopes, I also updated `LLParser`
to require a `scope:` field.
A number of testcases had grown bitrot and started failing with this
patch; I committed them separately in r233349. If I just broke your
out-of-tree testcases, you're probably hitting similar problems (so have
a look there).
llvm-svn: 233389
This was discussed a while back and I left it optional for migration. Since it's been far more than the 'week or two' that was discussed, time to actually make this manditory.
llvm-svn: 233357
We don't have any logic to emit those tables yet, so the SDAG lowering
of this intrinsic is just a stub. We can see the intrinsic in the
prepared IR, though.
llvm-svn: 233354
Change `getNonCompileUnitScope()` to return `MDScope` and
`getConstantAsMetadata()` to return `ConstantAsMetadata`. This will
make it easier to start requiring more type safety in the debug info
hierarchy.
llvm-svn: 233340
Move all the `MDNode` field helper methods into a new class,
`MDFieldPrinter`, and add helpers for integers, bools, and `DW_*`
symbolic constants. This reduces a ton of code duplication, and makes
it more mechanical to update `AsmWriter` to print broken code in the
context of stricter accessors (like in r233322).
llvm-svn: 233337
Check accessors of `MDLocation`, and change them to `cast<>` down to the
right types. Also add type-safe factory functions.
All the callers that handle broken code need to use the new versions of
the accessors (`getRawScope()` instead of `getScope()`) that still
return `Metadata*`. This is also necessary for things like
`MDNodeKeyImpl<MDLocation>` (in LLVMContextImpl.h) that need to unique
the nodes when their operands might still be forward references of the
wrong type.
In the `Value` hierarchy, consumers that handle broken code use
`getOperand()` directly. However, debug info nodes have a ton of
operands, and their order (even their existence) isn't stable yet. It's
safer and more maintainable to add an explicit "raw" accessor on the
class itself.
llvm-svn: 233322
We don't have any logic to emit those tables yet, so the sdag lowering
of this intrinsic is just a stub. We can see the intrinsic in the
prepared IR, though.
llvm-svn: 233209
Some languages, such as Go, have pre-defined structure types (e.g. "string"
is essentially a pointer/length pair) or pre-defined "typedef" types
(e.g. "error" is essentially a typedef for a specific interface type).
Such types do not have associated source location, so a Go frontend would
be correct not to associate a file name with such types.
This change relaxes the DIType verifier to permit unlocated types with
these tags.
Differential Revision: http://reviews.llvm.org/D8588
llvm-svn: 233200
The main verifier already recurses through the other entry points, so we
might as well descend here too.
This temporarily duplicates some work already done in
`verifyDebugInfo()`, but eventually I'll be removing the other side.
llvm-svn: 233095
Continue to simplify the `DIDescriptor` subclasses, so that they behave
more like raw pointers. Remove `getRaw()`, replace it with an
overloaded `get()`, and overload the arrow and cast operators. Two
testcases started to crash on the arrow operators with this change
because of `scope:` references that weren't real scopes. I fixed them.
Soon I'll add verifier checks for them too.
This also adds explicit dereference operators. Previously, the builtin
dereference against `operator MDNode *()` would have worked, but now the
builtins are ambiguous.
llvm-svn: 233030
Simplify boolean expressions using `true` and `false` with `clang-tidy`
Patch by Richard Thomson with a few other simplifications to fix
else-after-returns in the surrounding code.
Differential Revision: http://reviews.llvm.org/D8527
llvm-svn: 233005
A WIP patch makes `DIDescriptor` accessors more strict, which in turn
causes the `DebugInfoFinder` to crash on wrongly typed `!dbg`
attachments. Catch that error up front in
`Verifier::visitInstruction()`.
Also remove a test that we "handle" invalid `!dbg` attachments, added
back in r99938. We don't want to handle those anymore.
Note: I'm *not* recursing and verifying the debug info graph reachable
from this node; that work is already done by `verifyDebugInfo()`.
llvm-svn: 232834
Don't use the accessors in `DIImportedEntity` on a null pointer. (A WIP
patch to make `DIDescriptor` accessors more strict crashes here
otherwise.)
llvm-svn: 232833
Remove the separate `DebugInfoVerifier` class, as a partial step toward
better integrating debug info verification with the `Verifier`.
Right now, verification of debug info is kind of a mess.
- There are `DIDescriptor::Verify()` checks live in `DebugInfo.cpp`.
These return `bool`, and there's no way to see (except by opening a
debugger) why they fail.
- We rely on `DebugInfoFinder` to traverse the debug info graph and
dig up nodes. However, the regular `Verifier` visits many of these
nodes when it calls into debug info intrinsic operands. Visiting
twice and running different checks is kind of absurd.
- Moreover, `DebugInfoFinder` asserts on failed type resolution -- the
verifier should never assert!
By integrating the two verifiers, I'm aiming at solving these problems
(work to be done, obviously). Verification can be localized to the
`Verifier`; we can use a naive `MDNode` operand traversal to find all
the nodes; we can verify type references instead of asserting on
failure.
There are `assert()`s sprinkled throughout the optimizer and dwarf
backend on `DIDescriptor::Verify()` checks. This is a hangover from
when the debug info verifier was off, so I plan to remove them as I go
(once I confirm that the checks are done at verification time).
Note: to keep the behaviour of only running the debug info verifier when
-verify succeeds, I've added an `EverBroken` flag. Once the
`DebugInfoFinder` assertions are gone and the two traversals have been
merged, I expect to be able to remove this.
llvm-svn: 232790
Remove `DebugInfoVerifierLegacyPass` and the `-verify-di` pass.
Instead, call into the `DebugInfoVerifier` from inside
`VerifierLegacyPass::finalizeModule()`. This better matches the logic
in `verifyModule()` (used by the new PassManager), avoids requiring two
separate passes to verify the IR, and makes the API for "add a pass to
verify the IR" simple.
Note: the `-verify-debug-info` flag still works (for now, at least;
eventually it might make sense to just remove it).
llvm-svn: 232772
Summary:
This change splits `makeICmpRegion` into `makeAllowedICmpRegion` and
`makeSatisfyingICmpRegion` with slightly different contracts. The first
one is useful for determining what values some expression //may// take,
given that a certain `icmp` evaluates to true. The second one is useful
for determining what values are guaranteed to //satisfy// a given
`icmp`.
Reviewers: nlewycky
Reviewed By: nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8345
llvm-svn: 232575
COFF COMDATs (for selection kinds other than 'select any') require at
least one non-section symbol in the symbol table.
Satisfy this by morally enhancing the linkage from private to internal.
Differential Revision: http://reviews.llvm.org/D8394
llvm-svn: 232570
Break MDExpression off of DebugNode (inherit directly from `MDNode`) and
drop the fake `DW_TAG_expression` tag in the process.
AFAICT, there's no real functionality change here. The tag was
originally used by `DIDescriptor::isExpression()` to discriminate
between `MDNode`s, but in the new hierarchy we don't need that.
Fixes PR22780.
llvm-svn: 232550
r186634 started verifying debug info, and r194986 disabled it by default
because it was too expensive to run the checks on every function (since
most of the graph was reachable from each function).
r206300 moved the checks to module-level to make it cheaper, but there
was already quite a bit of testcase bitrot (and the verifier would only
print `<badref>`) so I guess no one had time to turn it back on.
This does just that. Upgrade scripts this past autumn and winter
probably fixed some of the bitrot, and this weekend I fixed the verifier
output (r232275, r232417, r232418) and thusly the remaining failing
testcases (r232290, r232415).
This is part of PR22777.
llvm-svn: 232505
If `Verifier` has already found a failure, don't call
`DebugInfoVerifier`. The latter sometimes crashes in `DebugInfoFinder`
when the former would give a nice message. The only two cases I found
it crashing are explicit verifier tests I've added:
- test/Verifier/llvm.dbg.declare-expression.ll
- test/Verifier/llvm.dbg.value-expression.ll
However, I assume frontends with bugs will create invalid IR as well.
IMO, the `DebugInfoVerifier` should never crash (instead, it should fail
to verify), but subtleties like that will be easier to work out once
it's enabled again.
This is part of PR22777.
llvm-svn: 232418
Now that we check `MDExpression` during `-verify` (r232299), make
the `DIExpression` wrapper more strict:
- remove redundant checks in `DebugInfoVerifier`,
- overload `get()` to `cast_or_null<MDExpression>` (superseding
`getRaw()`),
- stop checking for null in any accessor, and
- remove `DIExpression::Verify()` entirely in favour of
`MDExpression::isValid()`.
There is still some logic in this class, mostly to do with high-level
iterators; I'll defer cleaning up those until the rest of the wrappers
are similarly strict.
llvm-svn: 232412
Clarify the logic in `DIType::Verify()` by checking `isBasicType()`
earlier, by skipping `else` after `return`s, and by documenting an
otherwise opaque check.
No functionality change.
llvm-svn: 232410
Turns out `visitIntrinsicFunctionCall()` descends into all operands
already, so explicitly descending in `visitDbgIntrinsic()` (part of
r232296) isn't useful.
Updating a testcase that doesn't really need `-verify-debug-info` (since
r231082) as confirmation.
llvm-svn: 232408
Use an overload instead of a default argument for `Metadata::dump()`.
The latter seems to require calling `dump(nullptr)` explicitly when
using a debugger, where as the former doesn't.
Other than utility for debugging, there's NFC here.
llvm-svn: 232315
Change accessors to downcast to `MDLocalVariable` and `MDExpression`,
now that we have -verify checks in place to confirm that it's safe.
llvm-svn: 232299
Verify that debug info intrinsic arguments are valid. (These checks
will not recurse through the full debug info graph, so they don't need
to be cordoned of in `DebugInfoVerifier`.)
With those checks in place, changing the `DbgIntrinsicInst` accessors to
downcast to `MDLocalVariable` and `MDExpression` is natural (added isa
specializations in `Metadata.h` to support this).
Added tests to `test/Verifier` for the new -verify checks, and fixed the
debug info in all the in-tree tests.
If you have out-of-tree testcases that have started to fail to -verify,
hopefully the verify checks are helpful. The most likely problem is
that the expression argument is `!{}` (instead of `!MDExpression()`).
llvm-svn: 232296
Replumb the `AsmWriter` so that `Metadata::print()` is generally useful.
(Similarly change `Metadata::printAsOperand()`.)
- `SlotTracker` now has a mode where all metadata will be correctly
numbered when initializing a `Module`. Normally, `Metadata` only
referenced from within `Function`s gets numbered when the `Function`
is incorporated.
- `Metadata::print()` and `Metadata::printAsOperand()` (and
`Metadata::dump()`) now take an optional `Module` argument. When
provided, `SlotTracker` is initialized with the new mode, and the
numbering will be complete and consistent for all calls to `print()`.
- `Value::print()` uses the new `SlotTracker` mode when printing
intrinsics with `MDNode` operands, `MetadataAsValue` operands, or the
bodies of functions. Thus, metadata numbering will be consistent
between calls to `Metadata::print()` and `Value::print()`.
- `Metadata::print()` (and `Metadata::dump()`) now print the full
definition of `MDNode`s:
!5 = !{!6, !"abc", !7}
This matches behaviour for `Value::print()`, which includes the name
of instructions.
- Updated call sites in `Verifier` to call `print()` instead of
`printAsOperand()`.
All this, so that `Verifier` can print out useful failure messages that
involve `Metadata` for PR22777.
Note that `Metadata::printAsOperand()` previously took an optional
`bool` and `Module` operand. The former was cargo-culted from
`Value::printAsOperand()` and wasn't doing anything useful. The latter
didn't give consistent results (without the new `SlotTracker` mode).
llvm-svn: 232275
Given that the stated purpose of `CheckFailed()` is to provide a nice
spot for a breakpoint, it'd be nice not to have to use a regex to break
on it. Recover the ability to simply use `b CheckFailed` by
specializing the message-only version, and by changing the variadic
version to call into the message-only version.
llvm-svn: 232268
I'm just going to migrate these in a pretty ad-hoc & incremental way -
providing the backwards compatible API for now, then locally removing
it, fixing a few callers, adding it back in and commiting those callers.
Rinse, repeat.
The assertions should ensure that if I get this wrong we'll find out
about it and not just have one giant patch to revert, recommit, revert,
recommit, etc.
llvm-svn: 232240
Write the `alloca` array size explicitly when it's non-canonical.
Previously, if the array size was `iX 1` (where X is not 32), the type
would mutate to `i32` when round-tripping through assembly.
The testcase I added fails in `verify-uselistorder` (as well as
`FileCheck`), since the use-lists for `i32 1` and `i64 1` change.
(Manman Ren came across this when running `verify-uselistorder` on some
non-trivial, optimized code as part of PR5680.)
The type mutation started with r104911, which allowed array sizes to be
something other than an `i32`. Starting with r204945, we
"canonicalized" to `i64` on 64-bit platforms -- and then on every
round-trip through assembly, mutated back to `i32`.
I bundled a fixup for `-instcombine` to avoid r204945 on scalar
allocations. (There wasn't a clean way to sequence this into two
commits, since the assembly change on its own caused testcase churn, and
the `-instcombine` change can't be tested without the assembly changes.)
An obvious alternative fix -- change `AllocaInst::AllocaInst()`,
`AsmWriter` and `LLParser` to treat `intptr_t` as the canonical type for
scalar allocations -- was rejected out of hand, since this required
teaching them each about the data layout.
A follow-up commit will add an `-instcombine` to canonicalize the scalar
allocation array size to `i32 1` rather than leaving `iX 1` alone.
rdar://problem/20075773
llvm-svn: 232200
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
Constant folding for shift IR instructions ignores all bits above 32 of
second argument (shift amount).
Because of that, some undef results are not recognized and APInt can
raise an assert failure if second argument has more than 64 bits.
Patch by Paweł Bylica!
Differential Revision: http://reviews.llvm.org/D7701
llvm-svn: 232176
This should complete the job started in r231794 and continued in r232045:
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
AVX2 introduced proper integer variants of the hacked integer insert/extract
C intrinsics that were created for this same functionality with AVX1.
This should complete the removal of insert/extract128 intrinsics.
The Clang precursor patch for this change was checked in at r232109.
llvm-svn: 232120
This is a convenience function to ease mask creation of ShuffleVectors
in AutoUpgrade and other places.
Differential Revision: http://reviews.llvm.org/D8184
llvm-svn: 232047
Now that we've replaced the vinsertf128 intrinsics,
do the same for their extract twins.
This is very much like D8086 (checked in at r231794):
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
This is also the LLVM sibling to the cfe D8275 patch.
Differential Revision: http://reviews.llvm.org/D8276
llvm-svn: 232045
This causes a crash if the referenced intrinsic was malformed. In this case, we
would already have reported an error on the referenced intrinsic, but then
crashed on the second one when it tried to introspect the first without
error checking.
llvm-svn: 231910
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
This is the sibling patch for the Clang half of this change:
http://reviews.llvm.org/D8088
Differential Revision: http://reviews.llvm.org/D8086
llvm-svn: 231794
In this situation we would always have already flagged an error on the statepoint intrinsic,
but then we carry on to parse other, related GC intrinsics, and could end up crashing during that
verification when they try to access data from the malformed statepoint.
llvm-svn: 231759
Summary:
Now that the DataLayout is a mandatory part of the module, let's start
cleaning the codebase. This patch is a first attempt at doing that.
This patch is not exactly NFC as for instance some places were passing
a nullptr instead of the DataLayout, possibly just because there was a
default value on the DataLayout argument to many functions in the API.
Even though it is not purely NFC, there is no change in the
validation.
I turned as many pointer to DataLayout to references, this helped
figuring out all the places where a nullptr could come up.
I had initially a local version of this patch broken into over 30
independant, commits but some later commit were cleaning the API and
touching part of the code modified in the previous commits, so it
seemed cleaner without the intermediate state.
Test Plan:
Reviewers: echristo
Subscribers: llvm-commits
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231740
Summary:
See the two test cases.
; Can fold fcmp with undef on one side by choosing NaN for the undef
; Can fold fcmp with undef on both side
; fcmp u_pred undef, undef -> true
; fcmp o_pred undef, undef -> false
; because whatever you choose for the first undef
; you can choose NaN for the other undef
Reviewers: hfinkel, chandlerc, majnemer
Reviewed By: majnemer
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D7617
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231626
Multiplication is not dependent on signedness, so just treating
all input ranges as unsigned is not incorrect. However it will cause
overly pessimistic ranges (such as full-set) when used with signed
negative values.
Teach multiply to try to interpret its inputs as both signed and
unsigned, and then to take the most specific (smallest population)
as its result.
llvm-svn: 231483
When calling lock() after all passes are registered, the PassRegistry doesn't need a mutex anymore to look up passes.
This speeds up multithreaded llvm execution by ~5% (tested with 4 threads).
In an asserts build of llvm this has an even bigger impact.
Note that it's not required to use the lock function.
llvm-svn: 231276
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231270
The intrinsic is no longer generated by the front-end. Remove the intrinsic and
auto-upgrade it to a vector shuffle.
Reviewed by Nadav
This is related to rdar://problem/18742778.
llvm-svn: 231182
Summary:
This does not conceptually belongs here. Instead provide a shortcut
getModule() that provides access to the DataLayout.
Reviewers: chandlerc, echristo
Reviewed By: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8027
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231147
Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confident this commit is NFC as far as DWARF output is
concerned. Let me know if I'm wrong :).
The code changes are fairly mechanical:
- Bumped the "Debug Info Version".
- `DIBuilder` now creates the appropriate subclass of `MDNode`.
- Subclasses of DIDescriptor now expect to hold their "MD"
counterparts (e.g., `DIBasicType` expects `MDBasicType`).
- Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp`
for printing comments.
- Big update to LangRef to describe the nodes in the new hierarchy.
Feel free to make it better.
Testcase changes are enormous. There's an accompanying clang commit on
its way.
If you have out-of-tree debug info testcases, I just broke your build.
- `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to
update all the IR testcases.
- Unfortunately I failed to find way to script the updates to CHECK
lines, so I updated all of these by hand. This was fairly painful,
since the old CHECKs are difficult to reason about. That's one of
the benefits of the new hierarchy.
This work isn't quite finished, BTW. The `DIDescriptor` subclasses are
almost empty wrappers, but not quite: they still have loose casting
checks (see the `RETURN_FROM_RAW()` macro). Once they're completely
gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I
also expect to make a few schema changes now that it's easier to reason
about everything.
llvm-svn: 231082
Previously this would result in assertion failures or simply crashes
at various points in the optimizer when trying to create types of zero
bit width.
llvm-svn: 230936
Start using `TempMDNode` in `DIDescriptor::replaceAllUsesWith()`
(effectively `std::unique_ptr<MDNode, MDNode::deleteTemporary>`).
Besides making ownership more explicit, this prepares for when
`DIDescriptor` refers to nodes that are *not* `MDTuple`. The old logic
for "replacing" a node with itself used `MDNode::get()` to return a new
(uniqued) `MDTuple`, while the new logic just defers to
`MDNode::replaceWithUniqued()` (which also typically saves an allocation
and RAUW traffic by mutating the temporary in place).
llvm-svn: 230879
While gaining practical experience hand-updating CHECK lines (for moving
the new debug info hierarchy into place), I learnt a few things about
CHECK-ability of the specialized node assembly output.
- The first part of a `CHECK:` is to identify the "right" node (this
is especially true if you intend to use the new `CHECK-SAME`
feature, since the first CHECK needs to identify the node correctly
before you can split the line).
- If there's a `tag:`, it should go first.
- If there's a `name:`, it should go next (followed by the
`linkageName:`, if any).
- If there's a `scope:`, it should follow after that.
- When a node type supports multiple DW_TAGs, but one is implied by
its name and is overwhelmingly more common, the `tag:` field is
terribly uninteresting unless it's different.
- `MDBasicType` is almost always `DW_TAG_base_type`.
- `MDTemplateValueParameter` is almost always
`DW_TAG_template_value_parameter`.
- Printing `name: ""` doesn't improve CHECK-ability, and there are far
more nodes than I realized that are commonly nameless.
- There are a few other fields that similarly aren't very interesting
when they're empty.
This commit updates the `AsmWriter` as suggested above (and makes
necessary changes in `LLParser` for round-tripping).
llvm-svn: 230877
Properly escape string fields in metadata. I've added a spot-check with
direct coverage for `MDFile::getFilename()`, but we'll get more coverage
once the hierarchy is moved into place (since this comes up in various
checked-in testcases).
I've replicated the `if` logic using the `ShouldSkipEmpty` flag
(although a follow-up commit is going to change how often this flag is
specified); no NFCI other than escaping the string fields.
llvm-svn: 230875
Extract logic for escaping a string field in the new debug info
hierarchy from `GenericDebugNode`. A follow-up commit will use it far
more widely (hence the dead code for `ShouldSkipEmpty`).
llvm-svn: 230873
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
Use the IRBuilder helpers for gc.statepoint and gc.result, instead of
coding the construction by hand. Note that the gc.statepoint IRBuilder
handles only CallInst, not InvokeInst; retain that part of hand-coding.
Differential Revision: http://reviews.llvm.org/D7518
llvm-svn: 230591
Remove a newline from `AssemblyWriter::printMDNodeBody()`, and add one
to `AssemblyWriter::writeMDNode()`. NFCI for assembly output.
However, this drops an inconsistent newline from `Metadata::print()`
when `this` is an `MDNode`. Now the newline added by `Metadata::dump()`
won't look so verbose.
llvm-svn: 230565
It turns out we have a macro to ensure that debuggers can access
`dump()` methods. Use it. Hopefully this will prevent me (and others)
from committing crimes like in r223802 (search for /10000/, or just see
the fix in r224407).
llvm-svn: 230555
Summary:
This change fixes the FIXME that you recently added when you committed
(a modified version of) my patch. When `InstCombine` combines a load and
store of an pointer to those of an equivalently-sized integer, it currently
drops any `!nonnull` metadata that might be present. This change replaces
`!nonnull` metadata with `!range !{ 1, -1 }` metadata instead.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7621
llvm-svn: 230462
Parse (and write) symbolic constants in debug info `flags:` fields.
This prevents a readability (and CHECK-ability) regression with the new
debug info hierarchy.
Old (well, current) assembly, with pretty-printing:
!{!"...\\0016387", ...} ; ... [public] [rvalue reference]
Flags field without this change:
!MDDerivedType(flags: 16387, ...)
Flags field with this change:
!MDDerivedType(flags: DIFlagPublic | DIFlagRValueReference, ...)
As discussed in the review thread, this isn't a final state. Most of
these flags correspond to `DW_AT_` symbolic constants, and we might
eventually want to support arbitrary attributes in some form. However,
as it stands now, some of the flags correspond to other concepts (like
`FlagStaticMember`); until things are refactored this is the simplest
way to move forward without regressing assembly.
llvm-svn: 230111
Split debug info 'flags' bitfield over a vector so the current flags can
be iterated over. This API (in combination with r230107) will be used
for assembly support for symbolic constants.
llvm-svn: 230108
Add `DIDescriptor::getFlag(StringRef)` and
`DIDescriptor::getFlagString(unsigned)`. The latter only converts exact
matches; I'll add separate API for breaking the flags bitfield up into
parts.
llvm-svn: 230107
In the old (well, current) schema, there are two types of file
references: untagged and tagged (the latter references the former).
!0 = !{!"filename", !"/directory"}
!1 = !{!"0x29", !1} ; DW_TAG_file_type [filename] [/directory]
The interface to `DIBuilder` universally takes the tagged version,
described by `DIFile`. However, most `file:` references actually use
the untagged version directly.
In the new hierarchy, I'm merging this into a single node: `MDFile`.
Originally I'd planned to keep the old schema unchanged until after I
moved the new hierarchy into place.
However, it turns out to be trivial to make `MDFile` match both nodes at
the same time.
- Anyone referencing !1 does so through `DIFile`, whose implementation
I need to gut anyway (as I do the rest of the `DIDescriptor`s).
- Anyone referencing !0 just references an `MDNode`, and expects a
node with two `MDString` operands.
This commit achieves that, and updates all the testcases for the parts
of the new hierarchy that used the two-node schema (I've replaced the
untagged nodes with `distinct !{}` to make the diff clear (otherwise the
metadata all gets renumbered); it might be worthwhile to come back and
delete those nodes and renumber the world, not sure).
llvm-svn: 230057
When writing the bitcode serialization for the new debug info hierarchy,
I assumed two fields would never be null.
Drop that assumption, since it's brittle (and crashes the
`BitcodeWriter` if wrong), and is a check better left for the verifier
anyway. (No need for a bitcode upgrade here, since the new hierarchy is
still not in place.)
The fields in question are `MDCompileUnit::getFile()` and
`MDDerivedType::getBaseType()`, the latter of which isn't null in
test/Transforms/Mem2Reg/ConvertDebugInfo2.ll (see !14, a pointer to
nothing). While the testcase might have bitrotted, there's no reason
for the bitcode format to rely on non-null for metadata operands.
This also fixes a bug in `AsmWriter` where if the `file:` is null it
isn't emitted (caught by the double-round trip in the testcase I'm
adding) -- this is a required field in `LLParser`.
I'll circle back to ConvertDebugInfo2. Once the specialized nodes are
in place, I'll be trying to turn the debug info verifier back on by
default (in the newer module pass form committed r206300) and throwing
more logic in there. If the testcase has bitrotted (as opposed to me
not understanding the schema correctly) I'll fix it then.
llvm-svn: 229960
When trying to match the current schema with the new debug info
hierarchy, I downgraded `SizeInBits`, `AlignInBits` and `OffsetInBits`
to 32-bits (oops!). Caught this while testing my upgrade script to move
the hierarchy into place. Bump it back up to 64-bits and update tests.
llvm-svn: 229933
Add missing `nullptr` from `MDSubroutineType`'s operands for
`MDCompositeTypeBase::getIdentifier()` (and add tests for all the other
unused fields). This highlights just how crazy it is that
`MDSubroutineType` inherits from `MDCompositeTypeBase`.
llvm-svn: 229926
Follow-up to r229740, which removed `DITemplate*::getContext()` after my
upgrade script revealed that scopes are always `nullptr` for template
parameters. This is the other shoe: drop `scope:` from
`MDTemplateParameter` and its two subclasses. (Note: a bitcode upgrade
would be pointless, since the hierarchy hasn't been moved into place.)
llvm-svn: 229791
Put the name before the value in assembly for `MDEnum`. While working
on the testcase upgrade script for the new hierarchy, I noticed that it
"looks nicer" to have the name first, since it lines the names up in the
(somewhat typical) case that they have a common prefix.
llvm-svn: 229747
The scope/context is always the compile unit, which we replace with
`nullptr` anyway (via `getNonCompileUnitScope()`). Drop it explicitly.
I noticed this field was always null while writing testcase upgrade
scripts to transition to the new hierarchy. Seems wasteful to
transition it over if it's already out-of-use.
llvm-svn: 229740
`DIImportedEntity::getEntity()` currently returns a `DIScopeRef`, but
the nodes it references aren't always `DIScope`s. In particular, it can
reference global variables.
Introduce `DIDescriptorRef` to avoid the lie.
llvm-svn: 229733
We didn't properly handle the out-of-bounds case for
ConstantAggregateZero and UndefValue. This would manifest as a crash
when the constant folder was asked to fold a load of a constant global
whose struct type has no operands.
This fixes PR22595.
llvm-svn: 229352
The "dereferenceable" attribute cannot be added via .addAttribute(),
since it also expects a size in bytes. AttrBuilder#addAttribute or
AttributeSet#addAttribute is wrapped by classes Function, InvokeInst,
and CallInst. Add corresponding wrappers to
AttrBuilder#addDereferenceableAttr.
Having done this, propagate the dereferenceable attribute via
gc.relocate, adding a test to exercise it. Note that -datalayout is
required during execution over and above -instcombine, because
InstCombine only optionally requires DataLayoutPass.
Differential Revision: http://reviews.llvm.org/D7510
llvm-svn: 229265
LLVM's include tree and the use of using declarations to hide the
'legacy' namespace for the old pass manager.
This undoes the primary modules-hostile change I made to keep
out-of-tree targets building. I sent an email inquiring about whether
this would be reasonable to do at this phase and people seemed fine with
it, so making it a reality. This should allow us to start bootstrapping
with modules to a certain extent along with making it easier to mix and
match headers in general.
The updates to any code for users of LLVM are very mechanical. Switch
from including "llvm/PassManager.h" to "llvm/IR/LegacyPassManager.h".
Qualify the types which now produce compile errors with "legacy::". The
most common ones are "PassManager", "PassManagerBase", and
"FunctionPassManager".
llvm-svn: 229094
No caller specifies anything different; these parameters are dead code
and probably always have been. The new hierarchy doesn't bother with
the fields at all (see r228607 and r228652).
llvm-svn: 229037
Port `DIExpression::Operand` over to `MDExpression::ExprOperand`. The
logic is needed directly in `MDExpression` to support printing in
assembly.
llvm-svn: 229002
The sub-arrays for compile units have for a long time been initialized
to distinct temporary nodes with the `DW_TAG_base_type` tag, with no
other operands. These invalid `DIBasicType`s are later replaced with
appropriate arrays.
This seems like a poor man's assertion that the arrays do eventually get
replaced. These days, temporaries in the graph will cause assertions
when writing bitcode or assembly, so this isn't necessary. Use
temporary empty tuples instead.
Note that the whole idea of using temporaries and then replacing them
later is wasteful here. We never actually want to merge compile units
by uniquing based on content. Compile units should use `getDistinct()`
instead of `get()`, and then their operands can be freely replaced later
on.
llvm-svn: 228967
Apparently some code finally started to tickle this after my
canonicalization changes to instcombine.
The bug stems from trying to form a vector type out of scalars that
aren't compatible at all. In this example, from x86_mmx values. The code
in the vectorizer that checks for reasonable types whas checking for
aggregates or vectors, but there are lots of other types that should
just never reach the vectorizer.
Debugging this was made more confusing by the lie in an assert in
VectorType::get() -- it isn't that the types are *primitive*. The types
must be integer, pointer, or floating point types. No other types are
allowed.
I've improved the assert and added a helper to the vectorizer to handle
the element type validity checks. It now re-uses the VectorType static
function and then further excludes weird target-specific types that we
probably shouldn't be touching here (x86_fp80 and ppc_fp128). Neither of
these are really reachable anyways (neither 80-bit nor 128-bit things
will get vectorized) but it seems better to just eagerly exclude such
nonesense.
I've added a test case, but while it definitely covers two of the paths
through this code there may be more paths that would benefit from test
coverage. I'm not familiar enough with the SLP vectorizer to synthesize
test cases for all of these, but was able to update the code itself by
inspection.
llvm-svn: 228899
This allows IDEs to recognize the entire set of header files for
each of the core LLVM projects.
Differential Revision: http://reviews.llvm.org/D7526
Reviewed By: Chris Bieneman
llvm-svn: 228798
Add new API for converting temporaries that may self-reference.
Self-referencing nodes are not allowed to be uniqued, so sending them
into `replaceWithUniqued()` is dangerous (and this commit adds
assertions that prevent it).
`replaceWithPermanent()` has similar semantics to `get()` followed by
calls to `replaceOperandWith()`. In particular, if there's a
self-reference, it returns a distinct node; otherwise, it returns a
uniqued one. Like `replaceWithUniqued()` and `replaceWithDistinct()`
(well, it calls out to them) it mutates the temporary node in place if
possible, only calling `replaceAllUsesWith()` on a uniquing collision.
llvm-svn: 228726
I noticed this fields were never used in r228607, but I neglected to
propagate that into `MDTemplateParameter` until now. This really should
have been done before commit in r228640; sorry for the churn.
llvm-svn: 228652
Add specialized debug info metadata nodes that match the `DIDescriptor`
wrappers (used by `DIBuilder`) closely. Assembly and bitcode support to
follow soon (it'll mostly just be obvious), but this sketches in today's
schema. This is the first big commit (well, the only *big* one aside
from the testcase changes that'll come when I move this into place) for
PR22464.
I've marked a bunch of obvious changes as `TODO`s in the source; I plan
to make those changes promptly after this hierarchy is moved underneath
`DIDescriptor`, but for now I'm aiming mostly to match the status quo.
llvm-svn: 228640
intermediate representation. This
- increases consistency by using the same granularity everywhere
- allows for pieces < 1 byte
- DW_OP_piece didn't actually allow storing an offset.
Part of PR22495.
llvm-svn: 228631
Summary:
It's important that our users immediately know what gc.safepoint_poll
is. Also fix the style of the declaration of CreateGCStatepoint, in
preparation for another change that will wrap it.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7517
llvm-svn: 228626
Remove handling for DW_TAG_constant. We started producing it in
r110656, but reverted that in r110876 without dropping the support.
Finish the job.
llvm-svn: 228623
`DIExpression` deals with `uint64_t`, so it doesn't make sense that
`createExpression()` is created from `int64_t`. Switch to `uint64_t` to
unify them.
I've temporarily left in the `int64_t` version, which forwards to the
`uint64_t` version. I'll delete it once I've updated the callers.
llvm-svn: 228619
While a theoretical GC might change dereferenceability on collection,
there is no such known collector and no need to account for the case
with a flag yet.
Differential Revision: http://reviews.llvm.org/D7454
llvm-svn: 228606
Summary:
The alias.scope metadata represents sets of things an instruction might
alias with. When generically combining the metadata from two
instructions the result must be the union of the original sets, because
the new instruction might alias with anything any of the original
instructions aliased with.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7490
llvm-svn: 228525
Gather and Scatter are new introduced intrinsics, comming after recently implemented masked load and store.
This is the first patch for Gather and Scatter intrinsics. It includes only the syntax, parsing and verification.
Gather and Scatter intrinsics allow to perform multiple memory accesses (read/write) in one vector instruction.
The intrinsics are not target specific and will have the following syntax:
Gather:
declare <16 x i32> @llvm.masked.gather.v16i32(<16 x i32*> <vector of ptrs>, i32 <alignment>, <16 x i1> <mask>, <16 x i32> <passthru>)
declare <8 x float> @llvm.masked.gather.v8f32(<8 x float*><vector of ptrs>, i32 <alignment>, <8 x i1> <mask>, <8 x float><passthru>)
Scatter:
declare void @llvm.masked.scatter.v8i32(<8 x i32><vector value to be stored> , <8 x i32*><vector of ptrs> , i32 <alignment>, <8 x i1> <mask>)
declare void @llvm.masked.scatter.v16i32(<16 x i32> <vector value to be stored> , <16 x i32*> <vector of ptrs>, i32 <alignment>, <16 x i1><mask> )
Vector of ptrs - a set of source/destination addresses, to load/store the value.
Mask - switches on/off vector lanes to prevent memory access for switched-off lanes
vector of ptrs, value and mask should have the same vector width.
These are code examples where gather / scatter should be used and will allow function vectorization
;void foo1(int * restrict A, int * restrict B, int * restrict C) {
; for (int i=0; i<SIZE; i++) {
; A[i] = B[C[i]];
; }
;}
;void foo3(int * restrict A, int * restrict B) {
; for (int i=0; i<SIZE; i++) {
; A[B[i]] = i+5;
; }
;}
Tests will come in the following patches, with CodeGen and Vectorizer.
http://reviews.llvm.org/D7433
llvm-svn: 228521
Remove unnecessary restriction of 24-bits for line numbers in
`MDLocation`.
The rest of the debug info schema (with the exception of local
variables) uses 32-bits for line numbers. As I introduce the
specialized nodes, it makes sense to canonicalize on one size or the
other.
llvm-svn: 228455
This pass is responsible for figuring out where to place call safepoints and safepoint polls. It doesn't actually make the relocations explicit; that's the job of the RewriteStatepointsForGC pass (http://reviews.llvm.org/D6975).
Note that this code is not yet finalized. Its moving in tree for incremental development, but further cleanup is needed and will happen over the next few days. It is not yet part of the standard pass order.
Planned changes in the near future:
- I plan on restructuring the statepoint rewrite to use the functions add to the IRBuilder a while back.
- In the current pass, the function "gc.safepoint_poll" is treated specially but is not an intrinsic. I plan to make identifying the poll function a property of the GCStrategy at some point in the near future.
- As follow on patches, I will be separating a collection of test cases we have out of tree and submitting them upstream.
- It's not explicit in the code, but these two patches are introducing a new state for a statepoint which looks a lot like a patchpoint. There's no a transient form which doesn't yet have the relocations explicitly represented, but does prevent reordering of memory operations. Once this is in, I need to update actually make this explicit by reserving the 'unused' argument of the statepoint as a flag, updating the docs, and making the code explicitly check for such a thing. This wasn't really planned, but once I split the two passes - which was done for other reasons - the intermediate state fell out. Just reminds us once again that we need to merge statepoints and patchpoints at some point in the not that distant future.
Future directions planned:
- Identifying more cases where a backedge safepoint isn't required to ensure timely execution of a safepoint poll.
- Tweaking the insertion process to generate easier to optimize IR. (For example, investigating making SplitBackedge) the default.
- Adding opt-in flags for a GCStrategy to use this pass. Once done, add this pass to the actual pass ordering.
Differential Revision: http://reviews.llvm.org/D6981
llvm-svn: 228090
Patch by: Igor Laevsky
"This change generalizes statepoint verification to use ImmutableCallSite instead of CallInst. This will allow to easily implement invoke statepoint verification (in a following change)."
Differential Revision: http://reviews.llvm.org/D7308
llvm-svn: 228064
Allow `GenericDebugNode` construction directly from `MDString`, rather
than requiring `StringRef`s. I've refactored the `StringRef`
constructors to use these. There's no real functionality change here,
except for exposing the lower-level API.
The purpose of this is to simplify construction of string operands when
reading bitcode. It's unnecessarily indirect to parse an `MDString` ID,
lookup the `MDString` in the bitcode reader list, get the `StringRef`
out of that, and then have `GenericDebugNode::getImpl()` use
`MDString::get()` to acquire the original `MDString`. Instead, this
allows the bitcode reader to directly pass in the `MDString`.
llvm-svn: 227848
Move debug-info-centred `Metadata` subclasses into their own
header/source file. A couple of private template functions are needed
from both `Metadata.cpp` and `DebugInfoMetadata.cpp`, so I've moved them
to `lib/IR/MetadataImpl.h`.
llvm-svn: 227835
Patch by: Igor Laevsky
"Simple refactoring. This is done in preparation to support verification of invokable statepoints."
Differential Revision: http://reviews.llvm.org/D7276
llvm-svn: 227640
Summary:
MetadataAsValue uses a canonical format that strips the MDNode if it
contains only a single constant value. This triggers an assertion when
trying to cast the value to a MDNode.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7165
llvm-svn: 227319
querying of the pass registry.
The pass manager relies on the static registry of PassInfo objects to
perform all manner of its functionality. I don't understand why it does
much of this. My very vague understanding is that this registry is
touched both during static initialization *and* while each pass is being
constructed. As a consequence it is hard to make accessing it not
require a acquiring some lock. This lock ends up in the hot path of
setting up, tearing down, and invaliditing analyses in the legacy pass
manager.
On most systems you can observe this as a non-trivial % of the time
spent in 'ninja check-llvm'. However, I haven't really seen it be more
than 1% in extreme cases of compiling more real-world software,
including LTO.
Unfortunately, some of the GPU JITs are seeing this taking essentially
all of their time because they have very small IR running through
a small pass pipeline very many times (at least, this is the vague
understanding I have of it).
This patch tries to minimize the cost of looking up PassInfo objects by
leveraging the fact that the objects themselves are immutable and they
are allocated separately on the heap and so don't have their address
change. It also requires a change I made the last time I tried to debug
this problem which removed the ability to de-register a pass from the
registry. This patch creates a single access path to these objects
inside the PMTopLevelManager which memoizes the result of querying the
registry. This is somewhat gross as I don't really know if
PMTopLevelManager is the *right* place to put it, and I dislike using
a mutable member to memoize things, but it seems to work.
For long-lived pass managers this should completely eliminate
the cost of acquiring locks to look into the pass registry once the
memoized cache is warm. For 'ninja check' I measured about 1.5%
reduction in CPU time and in total time on a machine with 32 hardware
threads. For normal compilation, I don't know how much this will help,
sadly. We will still pay the cost while we populate the memoized cache.
I don't think it will hurt though, and for LTO or compiles with many
small functions it should still be a win. However, for tight loops
around a pass manager with many passes and small modules, this will help
tremendously. On the AArch64 backend I saw nearly 50% reductions in time
to complete 2000 cycles of spinning up and tearing down the pipeline.
Measurements from Owen of an actual long-lived pass manager show more
along the lines of 10% improvements.
Differential Revision: http://reviews.llvm.org/D7213
llvm-svn: 227299
This change reverts the interesting parts of 226311 (and 227046). This change introduced two problems, and I've been convinced that an alternate approach is preferrable anyways.
The bugs were:
- Registery appears to require all users be within the same linkage unit. After this change, asking for "statepoint-example" in Transform/ would sometimes get you nullptr, whereas asking the same question in CodeGen would return the right GCStrategy. The correct long term fix is to get rid of the utter hack which is Registry, but I don't have time for that right now. 227046 appears to have been an attempt to fix this, but I don't believe it does so completely.
- GCMetadataPrinter::finishAssembly was being called more than once per GCStrategy. Each Strategy was being added to the GCModuleInfo multiple times.
Once I get time again, I'm going to split GCModuleInfo into the gc.root specific part and a GCStrategy owning Analysis pass. I'm probably also going to kill off the Registry. Once that's done, I'll move the new GCStrategyAnalysis and all built in GCStrategies into Analysis. (As original suggested by Chandler.) This will accomplish my original goal of being able to access GCStrategy from Transform/ without adding all of the builtin GCs to IR/.
llvm-svn: 227109
These things are potentially used for non-DWARF data (see the discussion
in PR22235), so take the `Dwarf` out of the name. Since the new name
gives fewer clues, update the doxygen to properly describe what they
are.
llvm-svn: 226874
During `MDNode::deleteTemporary()`, call `replaceAllUsesWith(nullptr)`
to update all tracking references to `nullptr`.
This fixes PR22280, where inverted destruction order between tracking
references and the temporaries themselves caused a use-after-free in
`LLParser`.
An alternative fix would be to add an assertion that there are no users,
and continue to fix inverted destruction order in clients (like
`LLParser`), but instead I decided to make getting-teardown-right easy.
(If someone disagrees let me know.)
llvm-svn: 226866
Summary:
Some parsers need references back to the option they are members of. This is used for handling the argument string as well as by the various pass name parsers for making pass names into flags.
Making parsers that need to refer back to the option have a reference to the option eliminates some of the members of various parsers, and enables further code cleanup.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7131
llvm-svn: 226864
Specifically, gc.result benefits from this greatly. Instead of:
gc.result.int.*
gc.result.float.*
gc.result.ptr.*
...
We now have a gc.result.* that can specialize to literally any type.
Differential Revision: http://reviews.llvm.org/D7020
llvm-svn: 226857
With the appropriate Verifier changes, exactracting the result out of a
statepoint wrapping a vararg function crashes. However, a void vararg
function works fine: commit this first step.
Differential Revision: http://reviews.llvm.org/D7071
llvm-svn: 226599
ConstantArrays constructed during linking can cause quadratic memory
explosion. An example is the ConstantArrays constructed when linking in
GlobalVariables with appending linkage.
Releasing all unused constants can cause a 20% LTO compile-time
slowdown for a large application. So this commit releases unused ConstantArrays
only.
rdar://19040716. It reduces memory footprint from 20+G to 6+G.
llvm-svn: 226592
This reverts commit r226542, effectively reapplying r226540. This time,
initialize `IsEmpty` in the copy and move constructors as well.
llvm-svn: 226545
Now that the clone methods used by `MapMetadata()` don't do any
remapping (and return a temporary), they make more sense as member
functions on `MDNode` (and subclasses).
llvm-svn: 226541
Change `HeaderBuilder` API to work well even when it's not starting with
a tag. There's already one case like this, and the tag is moving
elsewhere as part of PR22235.
llvm-svn: 226540
Rather than relying on updating switch statements correctly, detect
whether `setHash()` exists in the subclass. If so, call
`recalculateHash()` and `setHash(0)` appropriately.
llvm-svn: 226531
As part of PR22235, introduce `DwarfNode` and `GenericDwarfNode`. The
former is a metadata node with a DWARF tag. The latter matches our
current (generic) schema of a header with string (and stringified
integer) data and an arbitrary number of operands.
This doesn't move it into place yet; that change will require a large
number of testcase updates.
llvm-svn: 226529
Swap usage of `SubclassData32` and `MDNodeSubclassData`, and rename
`MDNodeSubclassData` to `NumUnresolved`. Small drive-by cleanup to
`countUnresolvedOperands()` since otherwise the name clash with local
vars named `NumUnresolved` would be confusing.
llvm-svn: 226523
As pointed out in r226501, the distinction between `MDNode` and
`UniquableMDNode` is confusing. When we need subclasses of `MDNode`
that don't use all its functionality it might make sense to break it
apart again, but until then this makes the code clearer.
llvm-svn: 226520
Add `MDNode::replaceWithUniqued()` and `MDNode::replaceWithDistinct()`,
which mutate temporary nodes to become uniqued or distinct. On uniquing
collisions, the unique version is returned and the node is deleted.
This takes advantage of temporary nodes being folded back in, and should
let me clean up some awkward logic in `MapMetadata()`.
llvm-svn: 226510
Change `MDTuple::getTemporary()` and `MDLocation::getTemporary()` to
return (effectively) `std::unique_ptr<T, MDNode::deleteTemporary>`, and
clean up call sites. (For now, `DIBuilder` call sites just call
`release()` immediately.)
There's an accompanying change in each of clang and polly to use the new
API.
llvm-svn: 226504
Remove `MDNodeFwdDecl` (as promised in r226481). Aside from API
changes, there's no real functionality change here.
`MDNode::getTemporary()` now forwards to `MDTuple::getTemporary()`,
which returns a tuple with `isTemporary()` equal to true.
The main point is that we can now add temporaries of other `MDNode`
subclasses, needed for PR22235 (I introduced `MDNodeFwdDecl` in the
first place because I didn't recognize this need, and thought they were
only needed to handle forward references).
A few things left out of (or highlighted by) this commit:
- I've had to remove the (few) uses of `std::unique_ptr<>` to deal
with temporaries, since the destructor is no longer public.
`getTemporary()` should probably return the equivalent of
`std::unique_ptr<T, MDNode::deleteTemporary>`.
- `MDLocation::getTemporary()` doesn't exist yet (worse, it actually
does exist, but does the wrong thing: `MDNode::getTemporary()` is
inherited and returns an `MDTuple`).
- `MDNode` now only has one subclass, `UniquableMDNode`, and the
distinction between them is actually somewhat confusing.
I'll fix those up next.
llvm-svn: 226501
Merge `getDistinct()`'s implementation with those of `get()` and
`getIfExists()` for both `MDTuple` and `MDLocation`. This will make it
easier to scale to supporting temporaries.
llvm-svn: 226497
Use `isUniqued()` instead of `isStoredDistinctInContext()`, and remove
an assertion that won't be valid once temporaries are merged back in.
llvm-svn: 226491
Add an assertion in `UniquableMDNode::resolve()` to prevent temporaries
from being resolved (once they're merged back in). Needed to shuffle
order of `resolve()` and `storeDistinctInContext()` to prevent it from
firing.
llvm-svn: 226489
Unify the definitions of `MDNode::isResolved()` and
`UniquableMDNode::isResolved()`. Previously, `UniquableMDNode` could
answer this question more efficiently, but now that RAUW support has
been unified with `MDNodeFwdDecl`, `MDNode` doesn't need any casts to
figure out the answer.
llvm-svn: 226485
Add an `LLVMContext &` to `ReplaceableMetadataImpl`, create a class that
either holds a reference to an `LLVMContext` or owns a
`ReplaceableMetadataImpl`, and use the new class in `MDNode`.
- This saves a pointer in `UniquableMDNode` at the cost of a pointer
in `ValueAsMetadata` (which didn't used to store the `LLVMContext`).
There are far more of the former.
- Unifies RAUW support between `MDNodeFwdDecl` (which is going away,
see r226481) and `UniquableMDNode`.
llvm-svn: 226484
Change `MDNode::isDistinct()` to only apply to 'distinct' nodes (not
temporaries), and introduce `MDNode::isUniqued()` and
`MDNode::isTemporary()` for the other two possibilities.
llvm-svn: 226482
More clearly describe the type of storage used for `Metadata`.
- `Uniqued`: uniqued, stored in the context.
- `Distinct`: distinct, stored in the context.
- `Temporary`: not owned by anyone.
This is the first in a series of commits to fix a design problem with
`MDNodeFwdDecl` that I need to solve for PR22235. While `MDNodeFwdDecl`
works well as a forward declaration, we use `MDNode::getTemporary()` for
more than forward declarations -- we also need to create early versions
of nodes (with fields not filled in) that we'll fill out later (see
`DIBuilder::finalize()` and `CGDebugInfo::finalize()` for examples).
This was a blind spot I had when I introduced `MDNodeFwdDecl` (which
David Blaikie (indirectly) highlighted in an unrelated review [1]).
[1]: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150112/252381.html
In general, we need `MDTuple::getTemporary()` to give a temporary tuple
(like `MDNodeFwdDecl`), `MDLocation::getTemporary()` to give a temporary
location, and (the problem at hand) `GenericDebugMDNode::getTemporary()`
to give a temporary generic debug node.
So I need to fold the idea of "temporary" nodes back into
`UniquableMDNode`. (More commits to follow as I refactor.)
llvm-svn: 226481
Note: This change ended up being slightly more controversial than expected. Chandler has tentatively okayed this for the moment, but I may be revisiting this in the near future after we settle some high level questions.
Rather than have the GCStrategy object owned by the GCModuleInfo - which is an immutable analysis pass used mainly by gc.root - have it be owned by the LLVMContext. This simplifies the ownership logic (i.e. can you have two instances of the same strategy at once?), but more importantly, allows us to access the GCStrategy in the middle end optimizer. To this end, I add an accessor through Function which becomes the canonical way to get at a GCStrategy instance.
In the near future, this will allows me to move some of the checks from http://reviews.llvm.org/D6808 into the Verifier itself, and to introduce optimization legality predicates for some of the recent additions to InstCombine. (These will follow as separate changes.)
Differential Revision: http://reviews.llvm.org/D6811
llvm-svn: 226311
"Write a set of tests that show how name mangling is done for overloaded intrinsics." These happen to use gc.relocates to exercise the codepath in question, but is not a GC specific test.
Patch by: artagnon@gmail.com
Differential Revision: http://reviews.llvm.org/D6915
llvm-svn: 226056
This commit moves `MDLocation`, finishing off PR21433. There's an
accompanying clang commit for frontend testcases. I'll attach the
testcase upgrade script I used to PR21433 to help out-of-tree
frontends/backends.
This changes the schema for `DebugLoc` and `DILocation` from:
!{i32 3, i32 7, !7, !8}
to:
!MDLocation(line: 3, column: 7, scope: !7, inlinedAt: !8)
Note that empty fields (line/column: 0 and inlinedAt: null) don't get
printed by the assembly writer.
llvm-svn: 226048
Sometimes teardown happens before the debug info graph is complete
(e.g., when clang throws an error). In that case, `MDNode`s will still
have RAUW, so deleting constants that the `MDNode`s point at will be
relatively expensive -- it'll cause re-uniquing all up the chain (what
I've been referring to as "teardown madness").
So, drop references *before* deleting constants. We need to drop a few
more references now: the metadata side of the metadata/value bridges
needs to be dropped off the cliff along with the rest of it (previously,
the bridges were cleaned before we did anything with the `MDNode`s).
There's no real functionality change here -- state before and after
`LLVMContextImpl::~LLVMContextImpl()` is unchanged -- so no testcase.
llvm-svn: 226044
Happened pretty commonly during `LLVMContext` teardown when `clang -g`
hit an error. This fixes the use-after-free. Next I'll clean up
teardown so that it's not RAUW'ing when metadata-tracked values are
deleted (only really causes a problem if the graph is mid-construction
when teardown starts, but it's still unnecessary work).
llvm-svn: 226029
utils/sort_includes.py.
I clearly haven't done this in a while, so more changed than usual. This
even uncovered a missing include from the InstrProf library that I've
added. No functionality changed here, just mechanical cleanup of the
include order.
llvm-svn: 225974
This adds the domtree analysis to the new pass manager. The analysis
returns the same DominatorTree result entity used by the old pass
manager and essentially all of the code is shared. We just have
different boilerplate for running and printing the analysis.
I've converted one test to run in both modes just to make sure this is
exercised while both are live in the tree.
llvm-svn: 225969
and expose the necessary hooks in the API directly.
This makes it much cleaner for example to log the usage of a pass
manager from a library. It also makes it more obvious that this
functionality isn't "optional" or "asserts-only" for the pass manager.
llvm-svn: 225841
Add a new subclass of `UniquableMDNode`, `MDLocation`. This will be the
IR version of `DebugLoc` and `DILocation`. The goal is to rename this
to `DILocation` once the IR classes supersede the `DI`-prefixed
wrappers.
This isn't used anywhere yet. Part of PR21433.
llvm-svn: 225824
the generic functionality of the pass managers themselves.
In the new infrastructure, the pass "manager" isn't actually interesting
at all. It just pipelines a single chunk of IR through N passes. We
don't need to know anything about the IR or the passes to do this really
and we can replace the 3 implementations of the exact same functionality
with a single generic PassManager template, complementing the single
generic AnalysisManager template.
I've left typedefs in place to give convenient names to the various
obvious instantiations of the template.
With this, I think I've nuked almost all of the redundant logic in the
managers, and I think the overall design is actually simpler for having
single templates that clearly indicate there is no special logic here.
The logging is made somewhat more annoying by this change, but I don't
think the difference is worth having heavy-weight traits to help log
things.
llvm-svn: 225783
The functions {pred,succ,use,user}_{begin,end} exist, but many users
have to check *_begin() with *_end() by hand to determine if the
BasicBlock or User is empty. Fix this with a standard *_empty(),
demonstrating a few usecases.
llvm-svn: 225760
template.
This consolidates three copies of nearly the same core logic. It adds
"complexity" to the ModuleAnalysisManager in that it makes it possible
to share a ModuleAnalysisManager across multiple modules... But it does
so by deleting *all of the code*, so I'm OK with that. This will
naturally make fixing bugs in this code much simpler, etc.
The only down side here is that we have to use 'typename' and 'this->'
in various places, and the implementation is lifted into the header.
I'll take that for the code size reduction.
The convenient names are still typedef-ed and used throughout so that
users can largely ignore this aspect of the implementation.
The follow-up change to this will do the exact same refactoring for the
PassManagers. =D
It turns out that the interesting different code is almost entirely in
the adaptors. At the end, that should be essentially all that is left.
llvm-svn: 225757
This name is less descriptive, but it sort of puts things in the
'llvm.frame...' namespace, relating it to frameallocate and
frameaddress. It also avoids using "allocate" and "allocation" together.
llvm-svn: 225752
These intrinsics allow multiple functions to share a single stack
allocation from one function's call frame. The function with the
allocation may only perform one allocation, and it must be in the entry
block.
Functions accessing the allocation call llvm.recoverframeallocation with
the function whose frame they are accessing and a frame pointer from an
active call frame of that function.
These intrinsics are very difficult to inline correctly, so the
intention is that they be introduced rarely, or at least very late
during EH preparation.
Reviewers: echristo, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D6493
llvm-svn: 225746
This adds back the testcase from r225738, and adds to it. Looks like we
need both sides for now (the assertion was incorrect both ways, and
although it seemed reasonable (when written correctly) it wasn't
particularly important).
llvm-svn: 225745
so has clang-format. Notably, this fixes a bunch of formatting in the
CGSCC pass manager side of things that has been improved in clang-format
recently.
llvm-svn: 225743
This reverts commit r225738. Maybe the assertion is just plain wrong,
but this version fails on WAY more bots. I'll make sure both ways work
in a follow-up but I want to get bots green in the meantime.
llvm-svn: 225742
templated interface.
So far, every single IR unit I can come up with has address-identity.
That is, when two units of IR are both active in LLVM, their addresses
will be distinct of the IR is distinct. This is clearly true for
Modules, Functions, BasicBlocks, and Instructions. It turns out that the
only practical way to make the CGSCC stuff work the way we want is to
make it true for SCCs as well. I expect this pattern to continue.
When first designing the pass manager code, I kept this dimension of
freedom in the type parameters, essentially allowing for a wrapper-type
whose address did not form identity. But that really no longer makes
sense and is making the code more complex or subtle for no gain. If we
ever have an actual use case for this, we can figure out what makes
sense then and there. It will be better because then we will have the
actual example in hand.
While the simplifications afforded in this patch are fairly small
(mostly sinking the '&' out of many type parameters onto a few
interfaces), it would have become much more pronounced with subsequent
changes. I have a sequence of changes that will completely remove the
code duplication that currently exists between all of the pass managers
and analysis managers. =] Should make things much cleaner and avoid bug
fixing N times for the N pass managers.
llvm-svn: 225723
Add generic dispatch for the parts of `UniquableMDNode` that cast to
`MDTuple`. This makes adding other subclasses (like PR21433's
`MDLocation`) easier.
llvm-svn: 225697
Stop erasing `MDNode`s from the uniquing sets in `LLVMContextImpl`
during teardown (in particular, during
`UniquableMDNode::~UniquableMDNode()`). Although it's currently
feasible, there isn't any clear benefit and it may not be feasible for
other subclasses (which don't explicitly store the lookup hash).
llvm-svn: 225696
Move creation logic for `MDTuple`s down where it belongs. Once there
are a few more subclasses, these functions really won't make much sense
here (the `friend` relationship was already awkward). For now, leave
the `MDNode` versions around, but have it forward down.
llvm-svn: 225685
Split `GenericMDNode` into two classes (with more descriptive names).
- `UniquableMDNode` will be a common subclass for `MDNode`s that are
sometimes uniqued like constants, and sometimes 'distinct'.
This class gets the (short-lived) RAUW support and related API.
- `MDTuple` is the basic tuple that has always been returned by
`MDNode::get()`. This is as opposed to more specific nodes to be
added soon, which have additional fields, custom assembly syntax,
and extra semantics.
This class gets the hash-related logic, since other sublcasses of
`UniquableMDNode` may need to hash based on other fields.
To keep this diff from getting too big, I've added casts to `MDTuple`
that won't really scale as new subclasses of `UniquableMDNode` are
added, but I'll clean those up incrementally.
(No functionality change intended.)
llvm-svn: 225682
Instead of returning early on `handleChangedOperand()` recursion
(finally identified (and test added) in r225657), prevent it upfront by
releasing operands before RAUW.
Aside from massively different program flow, there should be no
functionality change ;).
llvm-svn: 225665
This will call `handleChangedOperand()` less frequently, but in that
case (i.e., `isStoredDistinctInContext()`) it has identical logic to
here.
llvm-svn: 225643
This was used previously for metadata but is no longer needed there. Not
doing this simplifies ValueHandle and will make it easier to fix things
like AssertingVH's DenseMapInfo.
llvm-svn: 225487
Propagate whether `MDNode`s are 'distinct' through the other types of IR
(assembly and bitcode). This adds the `distinct` keyword to assembly.
Currently, no one actually calls `MDNode::getDistinct()`, so these nodes
only get created for:
- self-references, which are never uniqued, and
- nodes whose operands are replaced that hit a uniquing collision.
The concept of distinct nodes is still not quite first-class, since
distinct-ness doesn't yet survive across `MapMetadata()`.
Part of PR22111.
llvm-svn: 225474
Patch by: Ramkumar Ramachandra <artagnon@gmail.com>
"This patch started out as an exploration of gc.relocate, and an attempt
to write a simple test in call-lowering. I then noticed that the
arguments of gc.relocate were not checked fully, so I went in and fixed
a few things. Finally, the most important outcome of this patch is that
my new error handling code caught a bug in a callsite in
stackmap-format."
Differential Revision: http://reviews.llvm.org/D6824
llvm-svn: 225412
Allow distinct `MDNode`s to be explicitly created. There's no way (yet)
of representing their distinctness in assembly/bitcode, however, so this
still isn't first-class.
Part of PR22111.
llvm-svn: 225406
`MDNode::replaceOperandWith()` changes all instances of metadata. Stop
using it when linking module flags, since (due to uniquing) the flag
values could be used by other metadata.
Instead, use new API `NamedMDNode::setOperand()` to update the reference
directly.
llvm-svn: 225397
passes too many time.
I think this is actually the issue that someone raised with me at the
developer's meeting and in an email, but that we never really got to the
bottom of. Having all the testing utilities made it much easier to dig
down and uncover the core issue.
When a pass manager is running many passes over a single function, we
need it to invalidate the analyses between each run so that they can be
re-computed as needed. We also need to track the intersection of
preserved higher-level analyses across all the passes that we run (for
example, if there is one module analysis which all the function analyses
preserve, we want to track that and propagate it). Unfortunately, this
interacted poorly with any enclosing pass adaptor between two IR units.
It would see the intersection of preserved analyses, and need to
invalidate any other analyses, but some of the un-preserved analyses
might have already been invalidated *and recomputed*! We would fail to
propagate the fact that the analysis had already been invalidated.
The solution to this struck me as really strange at first, but the more
I thought about it, the more natural it seemed. After a nice discussion
with Duncan about it on IRC, it seemed even nicer. The idea is that
invalidating an analysis *causes* it to be preserved! Preserving the
lack of result is trivial. If it is recomputed, great. Until something
*else* invalidates it again, we're good.
The consequence of this is that the invalidate methods on the analysis
manager which operate over many passes now consume their
PreservedAnalyses object, update it to "preserve" every analysis pass to
which it delivers an invalidation (regardless of whether the pass
chooses to be removed, or handles the invalidation itself by updating
itself). Then we return this augmented set from the invalidate routine,
letting the pass manager take the result and use the intersection of
*that* across each pass run to compute the final preserved set. This
accounts for all the places where the early invalidation of an analysis
has already "preserved" it for a future run.
I've beefed up the testing and adjusted the assertions to show that we
no longer repeatedly invalidate or compute the analyses across nested
pass managers.
llvm-svn: 225333
In order to make comdats always explicit in the IR, we decided to make
the syntax a bit more compact for the case of a GlobalObject in a
comdat with the same name.
Just dropping the $name causes problems for
@foo = globabl i32 0, comdat
$bar = comdat ...
and
declare void @foo() comdat
$bar = comdat ...
So the syntax is changed to
@g1 = globabl i32 0, comdat($c1)
@g2 = globabl i32 0, comdat
and
declare void @foo() comdat($c1)
declare void @foo() comdat
llvm-svn: 225302
a specific analysis result.
This is quite handy to test things, and will also likely be very useful
for debugging issues. You could narrow down pass validation failures by
walking these invalidate pass runs up and down the pass pipeline, etc.
I've added support to the pass pipeline parsing to be able to create one
of these for any analysis pass desired.
Just adding this class uncovered one latent bug where the
AnalysisManager CRTP base class had a hard-coded Module type rather than
using IRUnitT.
I've also added tests for invalidation and caching of analyses in
a basic way across all the pass managers. These in turn uncovered two
more bugs where we failed to correctly invalidate an analysis -- its
results were invalidated but the key for re-running the pass was never
cleared and so it was never re-run. Quite nasty. I'm very glad to debug
this here rather than with a full system.
Also, yes, the naming here is horrid. I'm going to update some of the
names to be slightly less awful shortly. But really, I've no "good"
ideas for naming. I'll be satisfied if I can get it to "not bad".
llvm-svn: 225246
Now that `LLVMContextImpl` can call `MDNode::dropAllReferences()` to
prevent teardown madness, stop dropping uniquing just because an operand
drops to null.
Part of PR21532.
llvm-svn: 225223
when all are being preserved.
We want to short-circuit this for a couple of reasons. One, I don't
really want passes to grow a dependency on actually receiving their
invalidate call when they've been preserved. I'm thinking about removing
this entirely. But more importantly, preserving everything is likely to
be the common case in a lot of scenarios, and it would be really good to
bypass all of the invalidation and preservation machinery there.
Avoiding calling N opaque functions to try to invalidate things that are
by definition still valid seems important. =]
This wasn't really inpsired by much other than seeing the spam in the
logging for analyses, but it seems better ot get it checked in rather
than forgetting about it.
llvm-svn: 225163
manager.
This starts to allow us to test analyses more easily, but it's really
only the beginning. Some of the code here is still untestable without
manual changes to create analysis passes, but I wanted to factor it into
a small of chunks as possible.
Next up in order to be able to test things are, in no particular order:
- No-op analyses passes so we don't have to use real ones to exercise
the pass maneger itself.
- Automatic way of generating dummy passes that require an analysis be
run, including a variant that calls a 'print' method on a pass to make
it even easier to print out the results of an analysis.
- Dummy passes that invalidate all analyses for their IR unit so we can
test invalidation and re-runs.
- Automatic way to print each analysis pass as it is re-run.
- Automatic but optional verification of analysis passes everywhere
possible.
I'm not claiming I'll get to all of these immediately, but that's what
is in the pipeline at some stage. I'm fleshing out exactly what I need
and what to prioritize by working on converting analyses and then trying
to test the conversion. =]
llvm-svn: 225162
units.
This was debated back and forth a bunch, but using references is now
clearly cleaner. Of all the code written using pointers thus far, in
only one place did it really make more sense to have a pointer. In most
cases, this just removes immediate dereferencing from the code. I think
it is much better to get errors on null IR units earlier, potentially
at compile time, than to delay it.
Most notably, the legacy pass manager uses references for its routines
and so as more and more code works with both, the use of pointers was
likely to become really annoying. I noticed this when I ported the
domtree analysis over and wrote the entire thing with references only to
have it fail to compile. =/ It seemed better to switch now than to
delay. We can, of course, revisit this is we learn that references are
really problematic in the API.
llvm-svn: 225145
Nothing particularly interesting, just adding infrastructure for use by in tree users and out of tree users.
Note: These were extracted out of a working frontend, but they have not been well tested in isolation.
Differential Revision: http://reviews.llvm.org/D6807
llvm-svn: 224981
a size and alignment. Several assertions in DwarfDebug rely on all variable
types to report back a size, or to be derived from a type with a size.
Tested in CFE.
llvm-svn: 224780
Add API to DIBuilder to handle self-referencing `DICompositeType`s.
Self-references aren't expected in the debug info graph, and we take
advantage of that by only calling `resolveCycles()` on nodes that were
once forward declarations (otherwise, DIBuilder needs an expensive
tracking reference to every unresolved node it creates, which in cyclic
graphs is *all of them*).
However, clang seems to create self-referencing `DICompositeType`s. Add
API to manage this safely. The paired commit to clang will include the
regression test.
I'll make the `DICompositeType` API `private` in a follow-up to prevent
misuse (I've separated that to prevent build failures from missing the
clang commit).
llvm-svn: 224482
This patch removes the RNG from Module. Passes should instead create a new RNG for their use as needed.
Patch by Stephen Crane @rinon.
Differential revision: http://reviews.llvm.org/D4377
llvm-svn: 224444
It's horrible to inspect `MDNode`s in a debugger. All of their operands
that are `MDNode`s get dumped as `<badref>`, since we can't assign
metadata slots in the context of a `Metadata::dump()`. (Why not? Why
not assign numbers lazily? Because then each time you called `dump()`,
a given `MDNode` could have a different lazily assigned number.)
Fortunately, the C memory model gives us perfectly good identifiers for
`MDNode`. Add pointer addresses to the dumps, transforming this:
(lldb) e N->dump()
!{i32 662302, i32 26, <badref>, null}
(lldb) e ((MDNode*)N->getOperand(2))->dump()
!{i32 4, !"foo"}
into:
(lldb) e N->dump()
!{i32 662302, i32 26, <0x100706ee0>, null}
(lldb) e ((MDNode*)0x100706ee0)->dump()
!{i32 4, !"foo"}
and this:
(lldb) e N->dump()
0x101200248 = !{<badref>, <badref>, <badref>, <badref>, <badref>}
(lldb) e N->getOperand(0)
(const llvm::MDOperand) $0 = {
MD = 0x00000001012004e0
}
(lldb) e N->getOperand(1)
(const llvm::MDOperand) $1 = {
MD = 0x00000001012004e0
}
(lldb) e N->getOperand(2)
(const llvm::MDOperand) $2 = {
MD = 0x0000000101200058
}
(lldb) e N->getOperand(3)
(const llvm::MDOperand) $3 = {
MD = 0x00000001012004e0
}
(lldb) e N->getOperand(4)
(const llvm::MDOperand) $4 = {
MD = 0x0000000101200058
}
(lldb) e ((MDNode*)0x00000001012004e0)->dump()
!{}
(lldb) e ((MDNode*)0x0000000101200058)->dump()
!{null}
into:
(lldb) e N->dump()
!{<0x1012004e0>, <0x1012004e0>, <0x101200058>, <0x1012004e0>, <0x101200058>}
(lldb) e ((MDNode*)0x1012004e0)->dump()
!{}
(lldb) e ((MDNode*)0x101200058)->dump()
!{null}
llvm-svn: 224325
Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.
- Only use the `metadata` type when referencing metadata from a call
intrinsic -- i.e., only when it's used as a `Value`.
- Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
when referencing it from call intrinsics.
So, assembly like this:
define @foo(i32 %v) {
call void @llvm.foo(metadata !{i32 %v}, metadata !0)
call void @llvm.foo(metadata !{i32 7}, metadata !0)
call void @llvm.foo(metadata !1, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{metadata !3}, metadata !0)
ret void, !bar !2
}
!0 = metadata !{metadata !2}
!1 = metadata !{i32* @global}
!2 = metadata !{metadata !3}
!3 = metadata !{}
turns into this:
define @foo(i32 %v) {
call void @llvm.foo(metadata i32 %v, metadata !0)
call void @llvm.foo(metadata i32 7, metadata !0)
call void @llvm.foo(metadata i32* @global, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{!3}, metadata !0)
ret void, !bar !2
}
!0 = !{!2}
!1 = !{i32* @global}
!2 = !{!3}
!3 = !{}
I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines). I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.
This is part of PR21532.
llvm-svn: 224257
The RAUW support in `Metadata` supports going to `nullptr` specifically
to handle values being deleted, causing `ValueAsMetadata` to be deleted.
Fix the case where the reference is from a `TrackingMDRef` (as opposed
to an `MDOperand` or a `MetadataAsValue`).
This is surprisingly rare -- metadata tracked by `TrackingMDRef` going
to null -- but it came up in an openSUSE bootstrap during inlining. The
tracking ref was held by the `ValueMap` because it was referencing a
local, the basic block containing the local became dead after it had
been merged in, and when the local was deleted, the tracking ref
asserted in an `isa`.
llvm-svn: 224146
Also remove redundant documentation:
- doxygen will copy documentation to overriden methods.
- Use \copydoc on PIMPL classes instead of replicating the text.
llvm-svn: 224089
This gives us better leak detection messages, like `Value` has.
This also has the side effect of papering over a problem where
`MachineInstr`s are added as garbage to the leak detector and then
deleted without being removed. If `MDNode::getTemporary()` allocates an
`MDNodeFwdDecl` in the same spot, the leak detector asserts. By
separating `MDNode`s into their own container we lose that assertion.
Since `MachineInstr` is required to have a trivial destructor, its usage
of `LeakDetector` at all is pretty suspect. I'll be sending a patch
soon to strip that out.
llvm-svn: 224060
As indicated by the tests, it is possible to feed the AsmParser an
invalid datalayout string. We should verify the result of parsing this
string regardless of whether or not we have assertions enabled.
llvm-svn: 223898
There were two major problems with `MDNode` memory management.
1. `MDNode::operator new()` called a placement array constructor for
`MDOperand`. What? Each operand needs to be placed individually.
2. `MDNode::operator delete()` failed to destruct the `MDOperand`s at
all.
Frankly it's hard to understand how this worked locally, how this
survived an LTO bootstrap, or how it worked on most of the bots.
llvm-svn: 223858
RAUW in a deterministic order to try to recover the hexagon bot [1],
whose tests started failing once my GCC fixes were in for r223802.
Otherwise, I'm not sure why tests would fail there and not here.
[1]: http://lab.llvm.org:8011/builders/llvm-hexagon-elf/builds/13426
llvm-svn: 223829
LLVM_EXPLICIT is only supported by recent version of MSVC, and it seems
the not-so-recent versions get confused about the operator bool() when
tryint to resolve operator== calls.
This removed the operator bool()'s since they don't seem to be used
anyway.
llvm-svn: 223824
Split `Metadata` away from the `Value` class hierarchy, as part of
PR21532. Assembly and bitcode changes are in the wings, but this is the
bulk of the change for the IR C++ API.
I have a follow-up patch prepared for `clang`. If this breaks other
sub-projects, I apologize in advance :(. Help me compile it on Darwin
I'll try to fix it. FWIW, the errors should be easy to fix, so it may
be simpler to just fix it yourself.
This breaks the build for all metadata-related code that's out-of-tree.
Rest assured the transition is mechanical and the compiler should catch
almost all of the problems.
Here's a quick guide for updating your code:
- `Metadata` is the root of a class hierarchy with three main classes:
`MDNode`, `MDString`, and `ValueAsMetadata`. It is distinct from
the `Value` class hierarchy. It is typeless -- i.e., instances do
*not* have a `Type`.
- `MDNode`'s operands are all `Metadata *` (instead of `Value *`).
- `TrackingVH<MDNode>` and `WeakVH` referring to metadata can be
replaced with `TrackingMDNodeRef` and `TrackingMDRef`, respectively.
If you're referring solely to resolved `MDNode`s -- post graph
construction -- just use `MDNode*`.
- `MDNode` (and the rest of `Metadata`) have only limited support for
`replaceAllUsesWith()`.
As long as an `MDNode` is pointing at a forward declaration -- the
result of `MDNode::getTemporary()` -- it maintains a side map of its
uses and can RAUW itself. Once the forward declarations are fully
resolved RAUW support is dropped on the ground. This means that
uniquing collisions on changing operands cause nodes to become
"distinct". (This already happened fairly commonly, whenever an
operand went to null.)
If you're constructing complex (non self-reference) `MDNode` cycles,
you need to call `MDNode::resolveCycles()` on each node (or on a
top-level node that somehow references all of the nodes). Also,
don't do that. Metadata cycles (and the RAUW machinery needed to
construct them) are expensive.
- An `MDNode` can only refer to a `Constant` through a bridge called
`ConstantAsMetadata` (one of the subclasses of `ValueAsMetadata`).
As a side effect, accessing an operand of an `MDNode` that is known
to be, e.g., `ConstantInt`, takes three steps: first, cast from
`Metadata` to `ConstantAsMetadata`; second, extract the `Constant`;
third, cast down to `ConstantInt`.
The eventual goal is to introduce `MDInt`/`MDFloat`/etc. and have
metadata schema owners transition away from using `Constant`s when
the type isn't important (and they don't care about referring to
`GlobalValue`s).
In the meantime, I've added transitional API to the `mdconst`
namespace that matches semantics with the old code, in order to
avoid adding the error-prone three-step equivalent to every call
site. If your old code was:
MDNode *N = foo();
bar(isa <ConstantInt>(N->getOperand(0)));
baz(cast <ConstantInt>(N->getOperand(1)));
bak(cast_or_null <ConstantInt>(N->getOperand(2)));
bat(dyn_cast <ConstantInt>(N->getOperand(3)));
bay(dyn_cast_or_null<ConstantInt>(N->getOperand(4)));
you can trivially match its semantics with:
MDNode *N = foo();
bar(mdconst::hasa <ConstantInt>(N->getOperand(0)));
baz(mdconst::extract <ConstantInt>(N->getOperand(1)));
bak(mdconst::extract_or_null <ConstantInt>(N->getOperand(2)));
bat(mdconst::dyn_extract <ConstantInt>(N->getOperand(3)));
bay(mdconst::dyn_extract_or_null<ConstantInt>(N->getOperand(4)));
and when you transition your metadata schema to `MDInt`:
MDNode *N = foo();
bar(isa <MDInt>(N->getOperand(0)));
baz(cast <MDInt>(N->getOperand(1)));
bak(cast_or_null <MDInt>(N->getOperand(2)));
bat(dyn_cast <MDInt>(N->getOperand(3)));
bay(dyn_cast_or_null<MDInt>(N->getOperand(4)));
- A `CallInst` -- specifically, intrinsic instructions -- can refer to
metadata through a bridge called `MetadataAsValue`. This is a
subclass of `Value` where `getType()->isMetadataTy()`.
`MetadataAsValue` is the *only* class that can legally refer to a
`LocalAsMetadata`, which is a bridged form of non-`Constant` values
like `Argument` and `Instruction`. It can also refer to any other
`Metadata` subclass.
(I'll break all your testcases in a follow-up commit, when I propagate
this change to assembly.)
llvm-svn: 223802
r223618 including special handling of `MDNode::intersect()`: if the
first operand is a self-reference with the same operands you're trying
to return, return it instead.
Reuse that handling in `MDNode::concatenate()` in the hopes that it
fixes a polly test that seems to rely on the old behaviour [1].
[1]: http://lab.llvm.org:8011/builders/polly-amd64-linux/builds/25167
llvm-svn: 223619
It doesn't make sense to unique self-referencing nodes. Drop uniquing
for them.
Note that `MDNode::intersect()` occasionally returns self-referencing
nodes. Previously these would be returned by `MDNode::get()`. I'm not
convinced this was intended behaviour -- to me it seems it should return
a node whose only operand is the self-reference -- but I don't know much
about alias scopes so I'm preserving it for now.
This is part of PR21532.
llvm-svn: 223618
Consider:
void f() {}
void __attribute__((weak)) g() {}
bool b = &f != &g;
It's possble for g to resolve to f if --defsym=g=f is passed on to the
linker.
llvm-svn: 223585
Disallow complex types of function-local metadata. The only valid
function-local metadata is an `MDNode` whose sole argument is a
non-metadata function-local value.
Part of PR21532.
llvm-svn: 223564
Required some APInt massaging to get proper empty/tombstone values. Apart
from making the code a bit simpler this also reduces the bucket size of
the ConstantInt map from 32 to 24 bytes.
llvm-svn: 223478
This bug has the effect of converting a test of isGCRelocate(InvokeInst*) from a false return to a crash.
This may be the root cause of the crash Joerg reported against r223137, but I'm still waiting for a clean build of clang to complete to be able to confirm. Once I've confirmed the issue, I'll submit a test case separately.
llvm-svn: 223370
I'm recommiting the codegen part of the patch.
The vectorizer part will be send to review again.
Masked Vector Load and Store Intrinsics.
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
llvm-svn: 223348
This is simply a grab bag of unrelated checks:
- A statepoint call can't be marked readonly or readnone
- We don't currently support inline asm or varadic target functions. Both could be supported, but don't currently work.
- I forgot to check that the number of call arguments actually matched the wrapped callee in my previous change. Included here.
llvm-svn: 223322
Add checks that the types in a gc.statepoint sequence match the wrapper callee and that relocating a pointer doesn't change it's type.
llvm-svn: 223275
The recently added documentation for statepoints claimed that we checked the parameters of the various intrinsics for validity. This patch adds the code to actually do so. I also removed a couple of redundant checks for conditions which are checked elsewhere in the Verifier and simplified the logic using the helper functions from Statepoint.h.
llvm-svn: 223259
When lazy reading a module, the types used in a function will not be visible to
a TypeFinder until the body is read.
This patch fixes that by asking the module for its identified struct types.
If a materializer is present, the module asks it. If not, it uses a TypeFinder.
This fixes pr21374.
I will be the first to say that this is ugly, but it was the best I could find.
Some of the options I looked at:
* Asking the LLVMContext. This could be made to work for gold, but not currently
for ld64. ld64 will load multiple modules into a single context before merging
them. This causes us to see types from future merges. Unfortunately,
MappedTypes is not just a cache when it comes to opaque types. Once the
mapping has been made, we have to remember it for as long as the key may
be used. This would mean moving MappedTypes to the Linker class and having
to drop the Linker::LinkModules static methods, which are visible from C.
* Adding an option to ignore function bodies in the TypeFinder. This would
fix the PR by picking the worst result. It would work, but unfortunately
we are currently quite dependent on the upfront type merging. I will
try to reduce our dependency, but it is not clear that we will be able
to get rid of it for now.
The only clean solution I could think of is making the Module own the types.
This would have other advantages, but it is a much bigger change. I will
propose it, but it is nice to have this fixed while that is discussed.
With the gold plugin, this patch takes the number of types in the LTO clang
binary from 52817 to 49669.
llvm-svn: 223215
Patch by Ben Gamari!
This redefines the `prefix` attribute introduced previously and
introduces a `prologue` attribute. There are a two primary usecases
that these attributes aim to serve,
1. Function prologue sigils
2. Function hot-patching: Enable the user to insert `nop` operations
at the beginning of the function which can later be safely replaced
with a call to some instrumentation facility
3. Runtime metadata: Allow a compiler to insert data for use by the
runtime during execution. GHC is one example of a compiler that
needs this functionality for its tables-next-to-code functionality.
Previously `prefix` served cases (1) and (2) quite well by allowing the user
to introduce arbitrary data at the entrypoint but before the function
body. Case (3), however, was poorly handled by this approach as it
required that prefix data was valid executable code.
Here we redefine the notion of prefix data to instead be data which
occurs immediately before the function entrypoint (i.e. the symbol
address). Since prefix data now occurs before the function entrypoint,
there is no need for the data to be valid code.
The previous notion of prefix data now goes under the name "prologue
data" to emphasize its duality with the function epilogue.
The intention here is to handle cases (1) and (2) with prologue data and
case (3) with prefix data.
References
----------
This idea arose out of discussions[1] with Reid Kleckner in response to a
proposal to introduce the notion of symbol offsets to enable handling of
case (3).
[1] http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-May/073235.html
Test Plan: testsuite
Differential Revision: http://reviews.llvm.org/D6454
llvm-svn: 223189
This is the third patch in a small series. It contains the CodeGen support for lowering the gc.statepoint intrinsic sequences (223078) to the STATEPOINT pseudo machine instruction (223085). The change also includes the set of helper routines and classes for working with gc.statepoints, gc.relocates, and gc.results since the lowering code uses them.
With this change, gc.statepoints should be functionally complete. The documentation will follow in the fourth change, and there will likely be some cleanup changes, but interested parties can start experimenting now.
I'm not particularly happy with the amount of code or complexity involved with the lowering step, but at least it's fairly well isolated. The statepoint lowering code is split into it's own files and anyone not working on the statepoint support itself should be able to ignore it.
During the lowering process, we currently spill aggressively to stack. This is not entirely ideal (and we have plans to do better), but it's functional, relatively straight forward, and matches closely the implementations of the patchpoint intrinsics. Most of the complexity comes from trying to keep relocated copies of values in the same stack slots across statepoints. Doing so avoids the insertion of pointless load and store instructions to reshuffle the stack. The current implementation isn't as effective as I'd like, but it is functional and 'good enough' for many common use cases.
In the long term, I'd like to figure out how to integrate the statepoint lowering with the register allocator. In principal, we shouldn't need to eagerly spill at all. The register allocator should do any spilling required and the statepoint should simply record that fact. Depending on how challenging that turns out to be, we may invest in a smarter global stack slot assignment mechanism as a stop gap measure.
Reviewed by: atrick, ributzka
llvm-svn: 223137
The statepoint intrinsics are intended to enable precise root tracking through the compiler as to support garbage collectors of all types. The addition of the statepoint intrinsics to LLVM should have no impact on the compilation of any program which does not contain them. There are no side tables created, no extra metadata, and no inhibited optimizations.
A statepoint works by transforming a call site (or safepoint poll site) into an explicit relocation operation. It is the frontend's responsibility (or eventually the safepoint insertion pass we've developed, but that's not part of this patch series) to ensure that any live pointer to a GC object is correctly added to the statepoint and explicitly relocated. The relocated value is just a normal SSA value (as seen by the optimizer), so merges of relocated and unrelocated values are just normal phis. The explicit relocation operation, the fact the statepoint is assumed to clobber all memory, and the optimizers standard semantics ensure that the relocations flow through IR optimizations correctly.
This is the first patch in a small series. This patch contains only the IR parts; the documentation and backend support will be following separately. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683.
Reviewed by: atrick, ributzka
llvm-svn: 223078
This reverts commit r222632 (and follow-up r222636), which caused a host
of LNT failures on an internal bot. I'll respond to the commit on the
list with a reproduction of one of the failures.
Conflicts:
lib/Target/X86/X86TargetTransformInfo.cpp
llvm-svn: 222936
clearly only exactly equal width ptrtoint and inttoptr casts are no-op
casts, it says so right there in the langref. Make the code agree.
Original log from r220277:
Teach the load analysis to allow finding available values which require
inttoptr or ptrtoint cast provided there is datalayout available.
Eventually, the datalayout can just be required but in practice it will
always be there today.
To go with the ability to expose available values requiring a ptrtoint
or inttoptr cast, helpers are added to perform one of these three casts.
These smarts are necessary to finish canonicalizing loads and stores to
the operational type requirements without regressing fundamental
combines.
I've added some test cases. These should actually improve as the load
combining and store combining improves, but they may fundamentally be
highlighting some missing combines for select in addition to exercising
the specific added logic to load analysis.
llvm-svn: 222739
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
llvm-svn: 222632
Fixes the self-host fail. Note that this commit activates dominator
analysis in the combiner by default (like the original commit did).
llvm-svn: 222590
These fields would need to be explicitly deleted before we RAUW the temporary
node anyway (this was done in cfe commit r222373). Instead, do not create
these useless nodes in the first place.
llvm-svn: 222434
This is to be consistent with StringSet and ultimately with the standard
library's associative container insert function.
This lead to updating SmallSet::insert to return pair<iterator, bool>,
and then to update SmallPtrSet::insert to return pair<iterator, bool>,
and then to update all the existing users of those functions...
llvm-svn: 222334
Having two ways to do this doesn't seem terribly helpful and
consistently using the insert version (which we already has) seems like
it'll make the code easier to understand to anyone working with standard
data structures. (I also updated many references to the Entry's
key and value to use first() and second instead of getKey{Data,Length,}
and get/setValue - for similar consistency)
Also removes the GetOrCreateValue functions so there's less surface area
to StringMap to fix/improve/change/accommodate move semantics, etc.
llvm-svn: 222319
Having the operands at the back prevents subclasses from safely adding
fields. Move them to the front.
Instead of replicating the custom `malloc()`, `free()` and `DestroyFlag`
logic that was there before, overload `new` and `delete`.
I added calls to a new `GenericMDNode::dropAllReferences()` in
`LLVMContextImpl::~LLVMContextImpl()`. There's a maze of callbacks
happening during teardown, and this resolves them before we enter
the destructors.
Part of PR21532.
llvm-svn: 222211
Split `MDNode` into two classes:
- `GenericMDNode`, which is uniquable (and for now, always starts
uniqued). Once `Metadata` is split from the `Value` hierarchy, this
class will lose the ability to RAUW itself.
- `MDNodeFwdDecl`, which is used for the "temporary" interface, is
never uniqued, and isn't managed by `LLVMContext` at all.
I've left most of the guts in `MDNode` for now, but I'll incrementally
move things to the right places (or delete the functionality, as
appropriate).
Part of PR21532.
llvm-svn: 222205
use DIScopeRef.
A paired commit at clang will follow to show cases where we will use an
identifer for the context of a global variable.
rdar://18958417
llvm-svn: 222195
Change uniquing from a `FoldingSet` to a `DenseSet` with custom
`DenseMapInfo`. Unfortunately, this doesn't save any memory, since
`DenseSet<T>` is a simple wrapper for `DenseMap<T, char>`, but I'll come
back to fix that later.
I used the name `GenericDenseMapInfo` to the custom `DenseMapInfo` since
I'll be splitting `MDNode` into two classes soon: `MDNodeFwdDecl` for
temporaries, and `GenericMDNode` for everything else.
I also added a non-debug-info reduced version of a type-uniquing test
that started failing on an earlier draft of this patch.
Part of PR21532.
llvm-svn: 222191
Make explicit the requirement that most IR values in `DIBuilder` are
`Constant`. This requires a follow-up change in clang.
Part of PR21532.
llvm-svn: 222070
Now that `MDString` and `MDNode` have a common base class, use it. Note
that it's not useful to assume subclasses of `Metadata` must be one or
the other since we'll be adding more subclasses soon enough.
Part of PR21532.
llvm-svn: 222064
Stop using `Value::getName()` to get the string behind an `MDString`.
Switch to `StringMapEntry<MDString>` so that we can find the string by
its coallocation.
This is part of PR21532.
llvm-svn: 221960
Windows defines NULL to 0, which when used as an argument to a variadic
function, is not a null pointer constant. As a result, Clang's
-Wsentinel fires on this code. Using '0' would be wrong on most 64-bit
platforms, but both MSVC and Clang make it work on Windows. Sidestep the
issue with nullptr.
llvm-svn: 221940
This will become the root of a new class hierarchy separate from
`Value`. As a first step, stick it between `Value` and `MDNode`.
This is part of PR21532.
llvm-svn: 221886
Currently, we have a type parameter mechanism for intrinsics. Rather than having to specify a separate intrinsic for each combination of argument and return types, we can specify a single intrinsic with one or more type parameters. These type parameters are passed explicitly to Intrinsic::getDeclaration or can be specified implicitly in the naming of the intrinsic function in an LL file.
Today, the types are limited to integer, floating point, and pointer types. With a goal of supporting symbolic targets for patchpoints and statepoints, this change adds support for function types. The change also includes support for first class aggregate types (named structures and arrays) since these appear in function types we've encountered.
Reviewed by: atrick, ributzka
Differential Revision: http://reviews.llvm.org/D4608
llvm-svn: 221742
Instead, we're going to separate metadata from the Value hierarchy. See
PR21532.
This reverts commit r221375.
This reverts commit r221373.
This reverts commit r221359.
This reverts commit r221167.
This reverts commit r221027.
This reverts commit r221024.
This reverts commit r221023.
This reverts commit r220995.
This reverts commit r220994.
llvm-svn: 221711
Summary:
This makes PIC levels a Module flag attribute, which can be queried by the
backend. The flag is named `PIC Level`, and can have a value of:
0 - Backend-default
1 - Small-model (-fpic)
2 - Large-model (-fPIC)
These match the `-pic-level' command line argument for clang, and the value of the
preprocessor macro `__PIC__'.
Test Plan:
New flags tests specific for the 'PIC Level' module flag.
Tests to be added as part of a future commit for PowerPC, which will use this new API.
Reviewers: rafael, echristo
Reviewed By: rafael, echristo
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D5882
llvm-svn: 221510
Imported declarations can be DIGlobalVariables which aren't a DIScope. Today
clang (unknowingly I believe) shoehorns these into a DIScope and it all works
just because we never access the fields.
llvm-svn: 221466
When generating gcov compatible profiling, we sometimes skip emitting
data for functions for one reason or another. However, this was
emitting different function IDs in the .gcno and .gcda files, because
the .gcno case was using the loop index before skipping functions and
the .gcda the array index after. This resulted in completely invalid
gcov data.
This fixes the problem by making the .gcno loop track the ID
separately from the loop index.
llvm-svn: 221441
Change `NamedMDNode::getOperator()` from returning `MDNode *` to
returning `Value *`. To reduce boilerplate at some call sites, add a
`getOperatorAsMDNode()` for named metadata that's expected to only
return `MDNode` -- for now, that's everything, but debug node named
metadata (such as llvm.dbg.cu and llvm.dbg.sp) will soon change. This
is part of PR21433.
Note that there's a follow-up patch to clang for the API change.
llvm-svn: 221375
This removes calls to isMaterializable in the following cases:
* It was redundant with a call to isDeclaration now that isDeclaration returns
the correct answer for materializable functions.
* It was followed by a call to Materialize. Just call Materialize and check EC.
llvm-svn: 221050
getDISubprogram was mistakenly thought to contain a bug: we thought we
might need to try harder if we found a DebugLoc we didn't find.
llvm-svn: 221044
Change `Instruction::getAllMetadata()` to modify a vector of `Value`
instead of `MDNode` and update call sites. This is part of PR21433.
llvm-svn: 221027
Change `Instruction::getMetadata()` to return `Value` as part of
PR21433.
Update most callers to use `Instruction::getMDNode()`, which wraps the
result in a `cast_or_null<MDNode>`.
llvm-svn: 221024
Add `Instruction::getMDNode()` that casts to `MDNode` before changing
`Instruction::getMetadata()` to return `Value`. This avoids adding
`cast_or_null<MDNode>` boiler-plate throughout the code.
Part of PR21433.
llvm-svn: 221023
This is a Microsoft calling convention that supports both x86 and x86_64
subtargets. It passes vector and floating point arguments in XMM0-XMM5,
and passes them indirectly once they are consumed.
Homogenous vector aggregates of up to four elements can be passed in
sequential vector registers, but this part is not implemented in LLVM
and will be handled in Clang.
On 32-bit x86, it is similar to fastcall in that it uses ecx:edx as
integer register parameters and is callee cleanup. On x86_64, it
delegates to the normal win64 calling convention.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D5943
llvm-svn: 220745
To do this, change the representation of lazy loaded functions.
The previous representation cannot differentiate between a function whose body
has been removed and one whose body hasn't been read from the .bc file. That
means that in order to drop a function, the entire body had to be read.
llvm-svn: 220580
This reverts commit r214981.
I'm not sure what I was thinking when I wrote this. Testing with MSVC
shows that this function is mangled to '@f@8':
int __fastcall f(int a, int b);
llvm-svn: 220492
This invariant is enforced in Value::replaceAllUsesWith, thus it seems
logical to apply it also to ValueHandles. This commit fixes InstCombine
to not trigger the assertion during the removal of constant bitcasts in
call instructions.
Differential Revision: http://reviews.llvm.org/D5828
llvm-svn: 220468
inttoptr or ptrtoint cast provided there is datalayout available.
Eventually, the datalayout can just be required but in practice it will
always be there today.
To go with the ability to expose available values requiring a ptrtoint
or inttoptr cast, helpers are added to perform one of these three casts.
These smarts are necessary to finish canonicalizing loads and stores to
the operational type requirements without regressing fundamental
combines.
I've added some test cases. These should actually improve as the load
combining and store combining improves, but they may fundamentally be
highlighting some missing combines for select in addition to exercising
the specific added logic to load analysis.
llvm-svn: 220277
Our metadata scheme lazily assigns IDs to string metadata, but we have a mechanism to preassign them as well. Using a preassigned ID is helpful since we get compile time type checking, and avoid some (minimal) string construction and comparison. This change adds enum value for three existing metadata types:
+ MD_nontemporal = 9, // "nontemporal"
+ MD_mem_parallel_loop_access = 10, // "llvm.mem.parallel_loop_access"
+ MD_nonnull = 11 // "nonnull"
I went through an updated various uses as well. I made no attempt to get all uses; I focused on the ones which were easily grepable and easily to translate. For example, there were several items in LoopInfo.cpp I chose not to update.
llvm-svn: 220248
Range metadata applies to loads, call, and invokes. We were validating that metadata applied to loads was correct according to the LangRef, but we were not validating metadata applied to calls or invokes. This change extracts the checking functionality to a common location, reuses it for all valid locations, and adds a simple test to ensure a misused range on a call gets reported.
llvm-svn: 220246
VarArg Intrinsic functions are encoded with "void" type as the last
argument. Now Intrinsic::getType can correctly return all the intrinsic
function type.
llvm-svn: 220205
be BigEndian so the default can continue to be zero-initialized.
This is one of the prerequisites to making DataLayout a constant and
always available part of every module.
llvm-svn: 220193
Clang CodeGen had a utility function for creating pointer alignment assumptions
using the @llvm.assume intrinsic. This functionality will also be needed by the
inliner (to preserve function-argument alignment attributes when inlining), so
this moves the utility function into IRBuilder where it can be used both by
Clang CodeGen and also other LLVM-level code.
llvm-svn: 219875
Store `User::NumOperands` (and `MDNode::NumOperands`) in `Value`.
On 64-bit host architectures, this reduces `sizeof(User)` and all
subclasses by 8, and has no effect on `sizeof(Value)` (or, incidentally,
on `sizeof(MDNode)`).
On 32-bit host architectures, this increases `sizeof(Value)` by 4.
However, it has no effect on `sizeof(User)` and `sizeof(MDNode)`, so the
only concrete subclasses of `Value` that actually see the increase are
`BasicBlock`, `Argument`, `InlineAsm`, and `MDString`. Moreover, I'll
be shocked and confused if this causes a tangible memory regression.
This has no functionality change (other than memory footprint).
llvm-svn: 219845
A follow-up commit will modify the memory-layout of `Value`, `User`, and
`MDNode`. First fix the comments to be doxygen-friendly (and to follow
the coding standards).
- Use "\brief" instead of "repeatedName -".
- Add a brief intro where it was missing.
- Remove duplicated comments from source files (and a couple of
noisy/trivial comments altogether).
llvm-svn: 219844
Follow-up to r219801. Post-commit review pointed out that all comments
require a `\brief` description [1], so I converted many and recrafted a
few to be briefer or to include a brief intro. (If I'm going to clean
them up, I should do it right!)
[1]: http://llvm.org/docs/CodingStandards.html#doxygen-use-in-documentation-comments
llvm-svn: 219808
A number of comment cleanups:
- Remove duplicated function and class names from comments.
- Remove duplicated comments from source file (some of which were
out-of-sync).
- Move any unduplicated comments from source file to header.
- Remove some noisy comments entirely (e.g., a comment for
`DIDescriptor::print()` saying "print descriptor" just gets in the
way of reading the code).
llvm-svn: 219801
Let me tell you a tale...
Originally committed in r211723 after discovering a nasty case of weird
scoping due to inlining, this was reverted in r211724 after it fired in
ASan/compiler-rt.
(minor diversion where I accidentally committed/reverted again in
r211871/r211873)
After further testing and fixing bugs in ArgumentPromotion (r211872) and
Inlining (r212065) it was recommitted in r212085. Reverted in r212089
after the sanitizer buildbots still showed problems.
Fixed another bug in ArgumentPromotion (r212128) found by this
assertion.
Recommitted in r212205, reverted in r212226 after it crashed some more
on sanitizer buildbots.
Fix clang some more in r212761.
Recommitted in r212776, reverted in r212793. ASan failures.
Recommitted in r213391, reverted in r213432, trying to reproduce flakey
ASan build failure.
Fixed bugs in r213805 (ArgPromo + DebugInfo), r213952
(LiveDebugVariables strips dbg_value intrinsics in functions not
described by debug info).
Recommitted in r214761, reverted in r214999, flakey failure on Windows
buildbot.
Fixed DeadArgElimination + DebugInfo bug in r219210.
Recommitted in r219215, reverted in r219512, failure on ObjC++ atomic
properties in the test-suite on Darwin.
Fixed ObjC++ atomic properties issue in Clang in r219690.
[This commit is provided 'as is' with no hope that this is the last time
I commit this change either expressed or implied]
llvm-svn: 219702
The LLVM Lang Ref states for signed/unsigned int to float conversions:
"If the value cannot fit in the floating point value, the results are undefined."
And for FP to signed/unsigned int:
"If the value cannot fit in ty2, the results are undefined."
This matches the C definitions.
The existing behavior pins to infinity or a max int value, but that may just
lead to more confusion as seen in:
http://llvm.org/bugs/show_bug.cgi?id=21130
Returning undef will hopefully lead to a less silent failure.
Differential Revision: http://reviews.llvm.org/D5603
llvm-svn: 219542
This invariant is violated (& the assertions fire) on some Objective C++
in the test-suite. Reverting while I investigate.
This reverts commit r219215.
llvm-svn: 219523
Let me tell you a tale...
Originally committed in r211723 after discovering a nasty case of weird
scoping due to inlining, this was reverted in r211724 after it fired in
ASan/compiler-rt.
(minor diversion where I accidentally committed/reverted again in
r211871/r211873)
After further testing and fixing bugs in ArgumentPromotion (r211872) and
Inlining (r212065) it was recommitted in r212085. Reverted in r212089
after the sanitizer buildbots still showed problems.
Fixed another bug in ArgumentPromotion (r212128) found by this
assertion.
Recommitted in r212205, reverted in r212226 after it crashed some more
on sanitizer buildbots.
Fix clang some more in r212761.
Recommitted in r212776, reverted in r212793. ASan failures.
Recommitted in r213391, reverted in r213432, trying to reproduce flakey
ASan build failure.
Fixed bugs in r213805 (ArgPromo + DebugInfo), r213952
(LiveDebugVariables strips dbg_value intrinsics in functions not
described by debug info).
Recommitted in r214761, reverted in r214999, flakey failure on Windows
buildbot.
Fixed DeadArgElimination + DebugInfo bug in r219210.
Recommitting and hoping that's the last of it.
[That one burned down, fell over, then sank into the swamp.]
llvm-svn: 219215
group's interface to all of the implementations of that analysis group.
The groups themselves can and do manage this anyways, the pass registry
needn't involve itself.
llvm-svn: 219097
pass registry.
This style of registry is somewhat questionable, but it being
non-monotonic is crazy. No one is (or should be) unloading DSOs with
passes and unregistering them here. I've checked with a few folks and
I don't know of anyone using this functionality or any important use
case where it is necessary.
llvm-svn: 219096
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 219010
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 218914
This reverts commit r218820. It turns out that Adrian has an
outstanding SROA patch that uses this.
I've updated it to forward to `createExpression()`.
llvm-svn: 218828
I neglected to update `DIBuilder::createPieceExpression()` in r218797,
which I noticed while rebasing a patch for PR17891. On closer
inspection, it looks like dead code.
If there are any downstream users of this, you should transition to the
more general `createExpression()`. Or, we can add this back, but then
it should just forward to `createExpression()`.
llvm-svn: 218820
`DIExpression`'s elements are 64-bit integers that are stored as
`ConstantInt`. The accessors already encapsulate the storage. This
commit updates the `DIBuilder` API to also encapsulate that.
llvm-svn: 218797
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
llvm-svn: 218787
r206400 and r209442 added remarks that are disabled by default.
However, if a diagnostic handler is registered, the remarks are sent
unfiltered to the handler. This is the right behaviour for clang, since
it has its own filters.
However, the diagnostic handler exposed in the LTO API receives only the
severity and message. It doesn't have the information to filter by pass
name. For LTO, disabled remarks should be filtered by the producer.
I've changed `LLVMContext::setDiagnosticHandler()` to take a `bool`
argument indicating whether to respect the built-in filters. This
defaults to `false`, so other consumers don't have a behaviour change,
but `LTOCodeGenerator::setDiagnosticHandler()` sets it to `true`.
To make this behaviour testable, I added a `-use-diagnostic-handler`
command-line option to `llvm-lto`.
This fixes PR21108.
llvm-svn: 218784
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
llvm-svn: 218778
Summary: These will be used to implement support for useful forward declarartions.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5328
llvm-svn: 217949
Summary:
replaceAllUsesWith had been modified to allow a DbgNode value to be
replaced by itself. In that case a new node is created by copying the
current DbgNode and the copy is used as replacement value.
When that copying happens, the value stored in this->DbgNode at the end
of RAUW would be a reference to the Node that has just been deleted.
This doesn't produce any bug right now, because the DI node on which we
call RAUW won't be used again.
Reviewers: dblaikie, echristo, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5326
llvm-svn: 217749
RAUW was only used on DIType to merge declarations and full definitions
of types. In order to support the same functionality for functions and
global variables, move the function up type DI type hierarchy to the
common parent of DIType, DISubprogram and DIVariable which is
DIDescriptor.
This functionality will be exercized when we add the code to emit
imported declarations for forward declared function/variables.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5325
llvm-svn: 217748
With this a DataLayoutPass can be reused for multiple modules.
Once we have doInitialization/doFinalization, it doesn't seem necessary to pass
a Module to the constructor.
Overall this change seems in line with the idea of making DataLayout a required
part of Module. With it the only way of having a DataLayout used is to add it
to the Module.
llvm-svn: 217548
Noticed while trying to understand how the merge of forward decalred types
and defintions work.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5291
llvm-svn: 217514
to make sure we don't do invalid load of an enum. Share the
conversion code between llvm::Module implementation and the
verifier.
This bug was reported by UBSan.
llvm-svn: 217395
parsing (and latent bug in the instruction definitions).
This is effectively a revert of r136287 which tried to address
a specific and narrow case of immediate operands failing to be accepted
by x86 instructions with a pretty heavy hammer: it introduced a new kind
of operand that behaved differently. All of that is removed with this
commit, but the test cases are both preserved and enhanced.
The core problem that r136287 and this commit are trying to handle is
that gas accepts both of the following instructions:
insertps $192, %xmm0, %xmm1
insertps $-64, %xmm0, %xmm1
These will encode to the same byte sequence, with the immediate
occupying an 8-bit entry. The first form was fixed by r136287 but that
broke the prior handling of the second form! =[ Ironically, we would
still emit the second form in some cases and then be unable to
re-assemble the output.
The reason why the first instruction failed to be handled is because
prior to r136287 the operands ere marked 'i32i8imm' which forces them to
be sign-extenable. Clearly, that won't work for 192 in a single byte.
However, making thim zero-extended or "unsigned" doesn't really address
the core issue either because it breaks negative immediates. The correct
fix is to make these operands 'i8imm' reflecting that they can be either
signed or unsigned but must be 8-bit immediates. This patch backs out
r136287 and then changes those places as well as some others to use
'i8imm' rather than one of the extended variants.
Naturally, this broke something else. The custom DAG nodes had to be
updated to have a much more accurate type constraint of an i8 node, and
a bunch of Pat immediates needed to be specified as i8 values.
The fallout didn't end there though. We also then ceased to be able to
match the instruction-specific intrinsics to the instructions so
modified. Digging, this is because they too used i32 rather than i8 in
their signature. So I've also switched those intrinsics to i8 arguments
in line with the instructions.
In order to make the intrinsic adjustments of course, I also had to add
auto upgrading for the intrinsics.
I suspect that the intrinsic argument types may have led everything down
this rabbit hole. Pretty happy with the result.
llvm-svn: 217310
follows '~' in a clobber constraint string.
Previously llc would hit an llvm_unreachable when compiling an inline-asm
instruction with malformed constraint string "~x{21}". This commit enables
LLParser to catch the error earlier and print a more helpful diagnostic.
rdar://problem/14206559
llvm-svn: 217288
Summary:
Split shouldExpandAtomicInIR() into different versions for Stores/Loads/RMWs/CmpXchgs.
Makes runOnFunction cleaner (no more redundant checking/casting), and will help moving
the X86 backend to this pass.
This requires a way of easily detecting which instructions are atomic.
I followed the pattern of mayReadFromMemory, mayWriteOrReadMemory, etc.. in making
isAtomic() a method of Instruction implemented by a switch on the opcodes.
Test Plan: make check
Reviewers: jfb
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D5035
llvm-svn: 217080
Adding 'IR' to the names in an attempt to be less ambiguous about the flags we're dealing with here.
The 'and' method is needed by the SLPVectorizer (PR20802) and possibly other passes.
llvm-svn: 217004
"Setting" does not equal "copying". This bug has sat dormant for 2 reasons:
1. The unit test was not adequate.
2. Every current user of the "copyFastMathFlags" API is operating on a new instruction.
(ie, all existing fast-math flags are off). If you copy flags to an existing
instruction that has some flags on already, you will not necessarily turn them off
as expected.
I uncovered this bug while trying to implement a fix for PR20802.
llvm-svn: 216939
The loop vectorizer preserves wrapping, exact, and fast-math properties of scalar instructions.
This patch adds a convenience method to make that operation easier because we need to do this
in the loop vectorizer, SLP vectorizer, and possibly other places.
Although this is a 'no functional change' patch, I've added a testcase to verify that the exact
flag is preserved by the loop vectorizer. The wrapping and fast-math flags are already checked
in existing testcases.
Differential Revision: http://reviews.llvm.org/D5138
llvm-svn: 216886
Make this conservatively correct and report false for different
address spaces, which might require a nontrivial translation.
Based on the few uses of this, I don't think this currently
breaks anything.
llvm-svn: 216846
specifier and change the default behavior to only emit the
DW_AT_accessibility(public) attribute when the isPublic() is explicitly
set.
rdar://problem/18154959
llvm-svn: 216799
We've rejected these kinds of functions since r28405 in 2006 because
it's impossible to lower the return of a callee cleanup varargs
function. However there are lots of legal ways to leave such a function
without returning, such as aborting. Today we can leave a function with
a musttail call to another function with the correct prototype, and
everything works out.
I'm removing the verifier check declaring that a normal return from such
a function is UB.
Reviewed By: nlewycky
Differential Revision: http://reviews.llvm.org/D5059
llvm-svn: 216779
The attached patch simplifies a few interfaces that don't need to take
ownership of a buffer.
For example, both parseAssembly and parseBitcodeFile will parse the
entire buffer before returning. There is no need to take ownership.
Using a MemoryBufferRef makes it obvious in the type signature that
there is no ownership transfer.
llvm-svn: 216488
Summary:
There is no functionality change here except in the way we assemble and
dump musttail calls in variadic functions. There's really no need to
separate out the bits for musttail and "is forwarding varargs" on call
instructions. A musttail call by definition has to forward the ellipsis
or it would fail verification.
Reviewers: chandlerc, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4892
llvm-svn: 216423
Take a StringRef instead of a "const char *".
Take a "std::error_code &" instead of a "std::string &" for error.
A create static method would be even better, but this patch is already a bit too
big.
llvm-svn: 216393
Somewhat unnoticed in the original implementation of discriminators, but
it could cause instructions to end up in new, small,
DW_TAG_lexical_blocks due to the use of DILexicalBlock to track
discriminator changes.
Instead, use DILexicalBlockFile which we already use to track file
changes without introducing new scopes, so it works well to track
discriminator changes in the same way.
llvm-svn: 216239
Implement `uselistorder` and `uselistorder_bb` assembly directives,
which allow the use-list order to be recovered when round-tripping to
assembly.
This is the bulk of PR20515.
llvm-svn: 216025
Change `ConstantExpr` to follow the model the other constants are using:
only malloc a replacement if it's going to be used. This fixes a subtle
bug where if an API user had used `ConstantExpr::get()` already to
create the replacement but hadn't given it any users, we'd delete the
replacement.
This relies on r216015 to thread `OnlyIfReduced` through
`ConstantExpr::getWithOperands()`.
llvm-svn: 216016
In order to change `ConstantExpr::replaceUsesOfWithOnConstant()` to work
like other constants (e.g., using `ConstantArray::getImpl()`), thread
`OnlyIfReduced` through as necessary. When `OnlyIfReduced` is false,
there's no functionality change. When it's true, if there's no constant
folding or type changes `nullptr` is returned instead of the new
constant.
`ConstantExpr::replaceUsesOfWithOnConstant()` will be updated to use the
"true" version in a follow-up commit.
llvm-svn: 216015
This reverts commit r215981, which reverted the above commits because
MSVC std::equal asserts on nullptr iterators, and thes commits
introduced an `ArrayRef::equals()` on empty ArrayRefs.
ArrayRef was changed not to use std::equal in r215986.
llvm-svn: 215987
Avoid creating a new `ConstantVector` on an RAUW of one of its members.
This reduces RAUW traffic on any containing constant.
This is part of PR20515.
llvm-svn: 215966
Previously, `ConstantArray::replaceUsesOfWithOnConstant()` neglected to
check whether it becomes a `ConstantDataArray`. Call
`ConstantArray::getImpl()` to check for that.
llvm-svn: 215965
Introduce `getImpl()` that tries the simplification logic from `get()`
and then gives up. This allows the logic to be reused elsewhere in a
follow-up commit.
llvm-svn: 215963
Avoid RAUW-ing `ConstantExpr` when an operand changes unless the new
`ConstantExpr` already has users. This prevents the RAUW from rippling
up the expression tree unnecessarily.
This commit indirectly adds test coverage for r215953 (this is how I
came across the bug).
This is part of PR20515.
llvm-svn: 215960
Rewrite `ConstantUniqueMap` to be more similar to
`ConstantAggrUniqueMap`.
- Use a `DenseMap` with custom MapInfo instead of a `std::map` with
linear lookups and deletion.
- Don't waste memory explicitly storing (heavyweight) keys.
Only `ConstantExpr` and `InlineAsm` actually use this data structure, so
I also updated them to use it.
This code cleanup is a precursor to reducing RAUW traffic on
`ConstantExpr` -- I felt badly adding a new (linear) call to
`ConstantUniqueMap::FindExistingKey`, so this designs away the concern.
A follow-up commit will transition the users of `ConstantAggrUniqueMap`
over.
llvm-svn: 215957
While *most* (X sdiv 1) operations will get caught by InstSimplify, it
is still possible for a sdiv to appear in the worklist which hasn't been
simplified yet.
This means that it is possible for 0 - (X sdiv 1) to get transformed
into (X sdiv -1); dividing by -1 can make the transform produce undef
values instead of the proper result.
Sorry for the lack of testcase, it's a bit problematic because it relies
on the exact order of operations in the worklist.
llvm-svn: 215818
Global variables that have `extern_weak` linkage may be null, so it's
incorrect to add `inbounds` when constant folding.
This also fixes a bug when parsing global aliases, whose forward
reference placeholders are global variables with `extern_weak` linkage.
If GEPs to these aliases are encountered before the alias itself, the
GEPs would incorrectly gain the `inbounds` keyword as well.
llvm-svn: 215803
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
An optional third field was added to `llvm.global_ctors` (and
`llvm.global_dtors`) in r209015. Most of the code has been changed to
deal with both versions of the variables. Users of the C API might
create either version, the helper functions in LLVM create the two-field
version, and clang now creates the three-field version.
However, the BitcodeReader was changed to always upgrade to the
three-field version. This created an unnecessary inconsistency in the
IR before/after serializing to bitcode.
This commit resolves the inconsistency by making the third field truly
optional (and not upgrading in the bitcode reader). Since `llvm-link`
was relying on this upgrade code, rather than deleting it I've moved it
into `ModuleLinker`, where it upgrades these arrays as necessary to
resolve inconsistencies between modules.
The ideal resolution would be to remove the 2-field version and make the
third field required. I filed PR20506 to track that.
I changed `test/Bitcode/upgrade-global-ctors.ll` to a negative test and
duplicated the `llvm-link` check in `test/Linker/global_ctors.ll` to
check both upgrade directions.
Since I came across this as part of PR5680 (serializing use-list order),
I've also added the missing `verify-uselistorder` RUN line to
`test/Bitcode/metadata-2.ll`.
llvm-svn: 215457
Type::dump() doesn't print a newline, which makes for a poor
experience in a debugger. This looks like it was an ommission
considering Value::dump() two lines above, so I've changed Type to add
a newline as well.
Of the two in-tree callers, one added a newline anyway, and I've
updated the other one to use Type::print instead.
llvm-svn: 215421
No functional change. To be used in future commits that need to look
for such instructions.
Reviewed By: rafael
Differential Revision: http://reviews.llvm.org/D4504
llvm-svn: 215413
Originally reverted in r213432 with flakey failures on an ASan self-host
build. After reduction it seems to be the same issue fixed in r213805
(ArgPromo + DebugInfo: Handle updating debug info over multiple
applications of argument promotion) and r213952 (by having
LiveDebugVariables strip dbg_value intrinsics in functions that are not
described by debug info). Though I cannot explain why this failure was
flakey...
llvm-svn: 214761
`shuffleUseLists()` is only used in `verify-uselistorder`, so move it
there to avoid bloating other executables. As a drive-by, update some
of the header docs.
This is part of PR5680.
llvm-svn: 214592
variables (for example, by-value struct arguments passed in registers, or
large integer values split across several smaller registers).
On the IR level, this adds a new type of complex address operation OpPiece
to DIVariable that describes size and offset of a variable fragment.
On the DWARF emitter level, all pieces describing the same variable are
collected, sorted and emitted as DWARF expressions using the DW_OP_piece
and DW_OP_bit_piece operators.
http://reviews.llvm.org/D3373
rdar://problem/15928306
What this patch doesn't do / Future work:
- This patch only adds the backend machinery to make this work, patches
that change SROA and SelectionDAG's type legalizer to actually create
such debug info will follow. (http://reviews.llvm.org/D2680)
- Making the DIVariable complex expressions into an argument of dbg.value
will reduce the memory footprint of the debug metadata.
- The sorting/uniquing of pieces should be moved into DebugLocEntry,
to facilitate the merging of multi-piece entries.
llvm-svn: 214576
Although unlinked `BasicBlock`s can be created, there's currently no way
to insert them into `Function`s after the fact. In particular,
`moveAfter()` and `moveBefore()` require that the basic block is already
linked.
Extract the logic for initially linking a `BasicBlock` out of the
constructor and into a member function that can be used for lazy
insertion.
- Asserts that the basic block is currently unlinked.
- Matches the logic of the constructor.
- Changed the constructor to use it since the logic matches.
This is needed in a follow-up commit for PR5680.
llvm-svn: 214563
Before this patch we had
@a = weak global ...
but
@b = alias weak ...
The patch changes aliases to look more like global variables.
Looking at some really old code suggests that the reason was that the old
bison based parser had a reduction for alias linkages and another one for
global variable linkages. Putting the alias first avoided the reduce/reduce
conflict.
The days of the old .ll parser are long gone. The new one parses just "linkage"
and a later check is responsible for deciding if a linkage is valid in a
given context.
llvm-svn: 214355
Per feedback on r214111, we are going to use null to represent unspecified
parameter. If the type array is {null}, it means a function that returns void;
If the type array is {null, null}, it means a variadic function that returns
void. In summary if we have more than one element in the type array and the last
element is null, it is a variadic function.
rdar://17628609
llvm-svn: 214189
DITypeArray is an array of DITypeRef, at its creation, we will create
DITypeRef (i.e use the identifier if the type node has an identifier).
This is the last patch to unique the type array of a subroutine type.
rdar://17628609
llvm-svn: 214132
Typedef DIArray to DITypedArray<DIDescriptor>. Also typedef DITypeArray as
DITypedArray<DITypeRef>.
This is the third of a series of patches to handle type uniqueing of the
type array for a subroutine type.
This commit should have no functionality change.
llvm-svn: 214115
This is the second of a series of patches to handle type uniqueing of the
type array for a subroutine type.
For vector and array types, getElements returns the array of subranges, so it
is a better name than getTypeArray. Even for class, struct and enum types,
getElements returns the members, which can be subprograms.
setArrays can set up to two arrays, the second is the templates.
This commit should have no functionality change.
llvm-svn: 214112
This is the first of a series of patches to handle type uniqueing of the
type array for a subroutine type.
This commit makes sure unspecified_parameter is a DIType to enable converting
the type array for a subroutine type to an array of DITypes.
This commit should have no functionality change. With this commit, we may
change unspecified type to be a DITrivialType instead of a DIType.
llvm-svn: 214111
I think the compiler got confused by the nested DEBUG macros.
It was failing with:
UseListOrder.cpp(80) : error C2059: syntax error : '}'
llvm-svn: 213954
In the process of fixing the noalias parameter -> metadata conversion process
that will take place during inlining (which will be committed soon, but not
turned on by default), I have come to realize that the semantics provided by
yesterday's commit are not really what we want. Here's why:
void foo(noalias a, noalias b, noalias c, bool x) {
*q = x ? a : b;
*c = *q;
}
Generically, we know that *c does not alias with *a and with *b (so there is an
'and' in what we know we're not), and we know that *q might be derived from *a
or from *b (so there is an 'or' in what we know that we are). So we do not want
the semantics currently, where any noalias scope matching any alias.scope
causes a NoAlias return. What we want to know is that the noalias scopes form a
superset of the alias.scope list (meaning that all the things we know we're not
is a superset of all of things the other instruction might be).
Making that change, however, introduces a composibility problem. If we inline
once, adding the noalias metadata, and then inline again adding more, and we
append new scopes onto the noalias and alias.scope lists each time. But, this
means that we could change what was a NoAlias result previously into a MayAlias
result because we appended an additional scope onto one of the alias.scope
lists. So, instead of giving scopes the ability to have parents (which I had
borrowed from the TBAA implementation, but seems increasingly unlikely to be
useful in practice), I've given them domains. The subset/superset condition now
applies within each domain independently, and we only need it to hold in one
domain. Each time we inline, we add the new scopes in a new scope domain, and
everything now composes nicely. In addition, this simplifies the
implementation.
llvm-svn: 213948
The dragonegg buildbot (and others?) started failing after
r213945/r213946 because `llvm-as` wasn't linking in the bitcode reader.
I think moving the verify functions to the same file as the verify pass
should fix the build. Adding a command-line option for maintaining
use-list order in assembly as a drive-by to prevent warnings about
unused static functions.
llvm-svn: 213947
Mehdi Amini