This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
llvm-svn: 301620
Summary of changes:
- corrected vmcnt, expcnt, lgkmcnt helpers to checks their argument for truncation;
- added saturated versions of these helpers.
See bug 32711 for details: https://bugs.llvm.org//show_bug.cgi?id=32711
Reviewers: artem.tamazov, vpykhtin
Differential Revision: https://reviews.llvm.org/D32546
llvm-svn: 301439
Commits were:
"Use WeakVH instead of WeakTrackingVH in AliasSetTracker's UnkownInsts"
"Add a new WeakVH value handle; NFC"
"Rename WeakVH to WeakTrackingVH; NFC"
The changes assumed pointers are 8 byte aligned on all architectures.
llvm-svn: 301429
Summary:
I plan to use WeakVH to mean "nulls itself out on deletion, but does
not track RAUW" in a subsequent commit.
Reviewers: dblaikie, davide
Reviewed By: davide
Subscribers: arsenm, mehdi_amini, mcrosier, mzolotukhin, jfb, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D32266
llvm-svn: 301424
Rely on MachineRegisterInfo's knowledge of used physical
registers.
Move flat_scratch initialization earlier, so the uses are visible
when making these decisions.
This will make it easier to add another reserved register
at the end for the stack pointer rather than handling another
special case.
llvm-svn: 301254
In call sequence setups, there may not be a frame index base
and the pointer is a constant offset from the frame
pointer / scratch wave offset register.
llvm-svn: 301230
Merges equivalent initializations of M0 and hoists them into a common
dominator block. Technically the same code can be used with any
register, physical or virtual.
Differential Revision: https://reviews.llvm.org/D32279
llvm-svn: 301228
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
Currently the operand type for ATOMIC_FENCE assumes value type of a pointer in address space 0.
This is fine for most targets. However for amdgcn target, the size of pointer in address space 0
depends on triple environment. For amdgiz environment, it is 64 bit but for other environment it is
32 bit. On the other hand, amdgcn target expects 32 bit fence operands independent of the target
triple environment. Therefore a hook is need in target lowering for getting the fence operand type.
This patch has no effect on targets other than amdgcn.
Differential Revision: https://reviews.llvm.org/D32186
llvm-svn: 301215
Fixes traps in any block besides the entry block,
and fixes depending on a live-in physical register
by using a virtual register copy.
Also happens to stop emitting a nop in the case
debug trap is not supported.
llvm-svn: 301206
Summary:
Fix a compiler bug when the lane select happens to end up in a VGPR.
Clarify the semantic of the corresponding intrinsic to be that of
the corresponding GLSL: the lane select must be uniform across a
wave front, otherwise results are undefined.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D32343
llvm-svn: 301197
SI_MASKED_UNREACHABLE does not have machine instruction encoding.
It needs special handling in AMDGPUAsmPrinter::EmitInstruction like some
other pseudo instructions.
This patch fixes compilation failure of RadeonRays.
Differential Revision: https://reviews.llvm.org/D32364
llvm-svn: 301025
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300932 and r300930, which was causing dag-combine to
loop forever. The problem was that optimizeLogicalImm was returning
true even when there was no change to the immediate node (which happened
when the immediate was all zeros or ones), which caused dag-combine to
push and pop the same node to the work list over and over again without
making any progress.
This commit fixes the bug by returning false early in optimizeLogicalImm
if the immediate is all zeros or ones. Also, it changes the code to
compare the immediate with 0 or Mask rather than calling
countPopulation.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 301019
It seems that r300930 was creating an infinite loop in dag-combine when
compling the following file:
MultiSource/Benchmarks/MiBench/consumer-typeset/z21.c
llvm-svn: 300940
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300913, which broke bots because I didn't fix a call to
ShrinkDemandedConstant in SIISelLowering.cpp after changing the APIs of
TargetLoweringOpt and TargetLowering.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300930
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300913
This is inserted directly in the text section. The relocation
for the function ends up resolving to the beginning of the
amd_kernel_code_t header rather than the actual function
entry point.
Also skip some of the comments for initialization
that only makes sense for kernels.
llvm-svn: 300736
Avoid looping through program to determine register counts.
This avoids needing to look at regmask operands.
Also fixes some counting errors with flat_scr when there
are no stack objects.
llvm-svn: 300482
While the incoming stack for a kernel is 256-byte aligned,
this refers to the base address of the entire wave. This isn't
useful information for most of codegen. Fixes unnecessarily
aligning stack objects in callees.
llvm-svn: 300481
If a kernel's pointer argument is known to be readonly
set access qualifier accordingly. This allows RT not to
flush caches before dispatches.
Differential Revision: https://reviews.llvm.org/D32091
llvm-svn: 300362
Add hasParamAttribute() and use it instead of hasAttribute(ArgNo+1,
Kind) everywhere.
The fact that the AttributeList index for an argument is ArgNo+1 should
be a hidden implementation detail.
NFC
llvm-svn: 300272
In many cases ds operations can be combined even if offsets do not
fit into 8 bit encoding. What it takes is to adjust base address.
Differential Revision: https://reviews.llvm.org/D31993
llvm-svn: 300227
If workgroup size is known inform llvm about range returned by local
id and local size queries.
Differential Revision: https://reviews.llvm.org/D31804
llvm-svn: 300102
The unused dummy src2_modifiers is missing, so it crashes
when trying to print it.
I tried to fully remove src2_modifiers, but there are some
irritations in the places where it is converted to mad since
it starts to require modifying use lists while iterating over
them.
llvm-svn: 299861
Increase threshold to unroll a loop which contains an "if" statement
whose condition defined by a PHI belonging to the loop. This may help
to eliminate if region and potentially even PHI itself, saving on
both divergence and registers used for the PHI.
Add a small bonus for each of such "if" statements.
Differential Revision: https://reviews.llvm.org/D31693
llvm-svn: 299779
- corrected DS_GWS_* opcodes (see VI_Shader_Programming#16.pdf for detailed description)
- address operand is not used
- several opcodes have data operand
- all opcodes have offset modifier
- DS_AND_SRC2_B32: corrected typo in mnemo
- DS_WRAP_RTN_F32 replaced with DS_WRAP_RTN_B32
- added CI/VI opcodes:
- DS_CONDXCHG32_RTN_B64
- DS_GWS_SEMA_RELEASE_ALL
- added VI opcodes:
- DS_CONSUME
- DS_APPEND
- DS_ORDERED_COUNT
Differential Revision: https://reviews.llvm.org/D31707
llvm-svn: 299767
Summary:
Difference beetween PreRegAlloc() and MachineSSAOptimization() are that the former is run despite of -O0 optimization level. In my undestanding SiShrinkInstructions and SDWAPeephole shouldn't run when optimizations are disabled.
With this change order of passes will not change.
Reviewers: arsenm, vpykhtin, rampitec
Subscribers: qcolombet, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D31705
llvm-svn: 299757
This is possible in ways that are not compiler bugs,
so stop asserting on them.
This emits an extra error when emitting objects when it
can't encode the new pseudo, but I'm not sure that matters.
llvm-svn: 299712
Our final address space mapping is to let constant address space to be 4 to match nvptx.
However for now we will make it 2 to avoid unnecessary work in FE/BE/devlib
about intrinsics returning constant pointers.
Differential Revision: https://reviews.llvm.org/D31770
llvm-svn: 299690
If a workgroup size is known to be not greater than wavefront size
the s_barrier instruction is not needed since all threads are guarantied
to come to the same point at the same time.
Differential Revision: https://reviews.llvm.org/D31731
llvm-svn: 299659
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
Add a new node to act as a fancy bitcast from f16 operations to
i32 that implicitly zero the high 16-bits of the result.
Alternatively could try making v2f16 legal and canonicalizing
on build_vectors.
llvm-svn: 299246
Currently ComputeNumSignBits returns the minimum number of sign bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original ComputeNumSignBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
I've only added support for BUILD_VECTOR and EXTRACT_VECTOR_ELT so far, all others will default to demanding all elements but can be updated in due course.
Followup to D25691.
Differential Revision: https://reviews.llvm.org/D31311
llvm-svn: 299219
Previously compiler often extracted common immediates into specific register, e.g.:
```
%vreg0 = S_MOV_B32 0xff;
%vreg2 = V_AND_B32_e32 %vreg0, %vreg1
%vreg4 = V_AND_B32_e32 %vreg0, %vreg3
```
Because of this SDWA peephole failed to find SDWA convertible pattern. E.g. in previous example this could be converted into 2 SDWA src operands:
```
SDWA src: %vreg2 src_sel:BYTE_0
SDWA src: %vreg4 src_sel:BYTE_0
```
With this change peephole check if operand is either immediate or register that is copy of immediate.
llvm-svn: 299202
Follow up to D25691, this sets up the plumbing necessary to support vector demanded elements support in known bits calculations in target nodes.
Differential Revision: https://reviews.llvm.org/D31249
llvm-svn: 299201
What we really want to do is distinguish functions that may
be called by other functions, and graphics shaders are not
called kernels.
llvm-svn: 299140
If set to false it does not remove global aliases. With this parameter
set to false it should be safe to run the pass before link.
Differential Revision: https://reviews.llvm.org/D31489
llvm-svn: 299108
This is less important than increase threshold for private memory,
but still brings performance improvements in a wide range of tests.
Unrolling more for local memory serves three purposes: it allows
to combine ds operations if offset becomes static, saves registers
used for offsets in case of static offsets, and allows better lds
latency hiding.
Differential Revision: https://reviews.llvm.org/D31412
llvm-svn: 298948
This is incorrect to record region boundaries before scheduling,
it may change after scheduling. As a result second pass may see less
instructions to schedule than it should.
Differential Revision: https://reviews.llvm.org/D31434
llvm-svn: 298945
Previously it was covered by the internalization. It turns out we cannot
run internalizer in FE, it break separate compilation tests. Thus early
inliner gets its own option.
Differential Revision: https://reviews.llvm.org/D31429
llvm-svn: 298935
Enabled clamp and omod for v_cvt_* opcodes which have src0 of an integer type
Reviewers: vpykhtin, arsenm
Differential Revision: https://reviews.llvm.org/D31327
llvm-svn: 298852
As we introduced target triple environment amdgiz and amdgizcl, the address
space values are no longer enums. We have to decide the value by target triple.
The basic idea is to use struct AMDGPUAS to represent address space values.
For address space values which are not depend on target triple, use static
const members, so that they don't occupy extra memory space and is equivalent
to a compile time constant.
Since the struct is lightweight and cheap, it can be created on the fly at
the point of usage. Or it can be added as member to a pass and created at
the beginning of the run* function.
Differential Revision: https://reviews.llvm.org/D31284
llvm-svn: 298846
Switch data layout by target triple environment amdgiz and amdgizcl indicating using of an address space mapping in which generic address space is 0.
amdgiz is for non-OpenCL environment where generic address space is 0.
amdgizcl is for OpenCL environment where generic address space is 0.
Differential Revision: https://reviews.llvm.org/D31211
llvm-svn: 298758
If the branch condition for a loop was a phi which itself
was fed from a phi from a loop, it isn't safe to try
to delete the phi until after the loop is handled.
llvm-svn: 298737
StructurizeCFG can't handle cases with multiple
returns creating regions with multiple exits.
Create a copy of UnifyFunctionExitNodes that only
unifies exit nodes that skips exit nodes
with uniform branch sources.
llvm-svn: 298729
- Rename runtime metadata -> code object metadata
- Make metadata not flow
- Switch enums to use ScalarEnumerationTraits
- Cleanup and move AMDGPUCodeObjectMetadata.h to AMDGPU/MCTargetDesc
- Introduce in-memory representation for attributes
- Code object metadata streamer
- Create metadata for isa and printf during EmitStartOfAsmFile
- Create metadata for kernel during EmitFunctionBodyStart
- Finalize and emit metadata to .note during EmitEndOfAsmFile
- Other minor improvements/bug fixes
Differential Revision: https://reviews.llvm.org/D29948
llvm-svn: 298552
This is used for a specific type of return to a shader part's
epilog code. Rename to try avoiding confusion from a true
call's return.
llvm-svn: 298452
This adds a parameter to @llvm.objectsize that makes it return
conservative values if it's given null.
This fixes PR23277.
Differential Revision: https://reviews.llvm.org/D28494
llvm-svn: 298430
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Summary:
First iteration of SDWA peephole.
This pass tries to combine several instruction into one SDWA instruction. E.g. it converts:
'''
V_LSHRREV_B32_e32 %vreg0, 16, %vreg1
V_ADD_I32_e32 %vreg2, %vreg0, %vreg3
V_LSHLREV_B32_e32 %vreg4, 16, %vreg2
'''
Into:
'''
V_ADD_I32_sdwa %vreg4, %vreg1, %vreg3 dst_sel:WORD_1 dst_unused:UNUSED_PAD src0_sel:WORD_1 src1_sel:DWORD
'''
Pass structure:
1. Iterate over machine instruction in basic block and try to apply "SDWA patterns" to each of them. SDWA patterns match machine instruction into either source or destination SDWA operand. E.g. ''' V_LSHRREV_B32_e32 %vreg0, 16, %vreg1''' is matched to source SDWA operand '''%vreg1 src_sel:WORD_1'''.
2. Iterate over found SDWA operands and find instruction that could be potentially coverted into SDWA. E.g. for source SDWA operand potential instruction are all instruction in this basic block that uses '''%vreg0'''
3. Iterate over all potential instructions and check if they can be converted into SDWA.
4. Convert instructions to SDWA.
This review contains basic implementation of SDWA peephole pass. This pass requires additional testing fot both correctness and performance (no performance testing done).
There are several ways this pass can be improved:
1. Make this pass work on whole function not only basic block. As I can see this can be done right now without changes to pass.
2. Introduce more SDWA patterns
3. Introduce mnemonics to limit when SDWA patterns should apply
Reviewers: vpykhtin, alex-t, arsenm, rampitec
Subscribers: wdng, nhaehnle, mgorny
Differential Revision: https://reviews.llvm.org/D30038
llvm-svn: 298365
This is direct port of HSAILAliasAnalysis pass, just cleaned for
style and renamed.
Differential Revision: https://reviews.llvm.org/D31103
llvm-svn: 298172
If the loop condition was an i1 phi with a constantexpr input, this
would add a loop intrinsic fed by a phi dependent on a call to
if.break in the same block. Insert the call in the loop header.
llvm-svn: 298121
Move backend internal intrinsics along with the rest of the
normal intrinsics, and use the Intrinsic::getDeclaration
API instead of manually constructing the type list.
It's surprising this was working before. fdiv.fast had
the wrong number of parameters. The control flow intrinsic
declaration attributes were not being applied, and
their types were inconsistent. The actual IR use types
did not match the declaration, and were closer to the
types used for the patterns. The brcond lowering
was changing the types, so introduce new nodes for those.
llvm-svn: 298119
Loop unswitching can be extremely harmful for a SIMT target. In case
if hoisted condition is not uniform a SIMT machine will execute both
clones of a loop sequentially. Therefor LoopUnswitch checks if the
condition is non-divergent.
Since DivergenceAnalysis adds an expensive PostDominatorTree analysis
not needed for non-SIMT targets a new option is added to avoid unneded
analysis initialization. The method getAnalysisUsage is called when
TargetTransformInfo is not yet available and we cannot use it here.
For that reason a new field DivergentTarget is added to PassManagerBuilder
to control the behavior and set this field from a target.
Differential Revision: https://reviews.llvm.org/D30796
llvm-svn: 298104
We can mark functions to always inline early in the opt. Since we do not have
call support this early inlining creates opportunities for inter-procedural
optimizations which would not occur otherwise.
Differential Revision: https://reviews.llvm.org/D31016
llvm-svn: 297958
computeKnownBits didn't handle fp_to_fp16 to report
the high bits as 0. ARM maps the generic node to an instruction
that does not modify the high bits of the register, so introduce
a target node where the high bits are known 0.
llvm-svn: 297873
Since v_max_f32_e64/v_max_f16_e64 can be folded if the target
instruction supports the clamp bit, we also need to maintain
modifiers when converting v_mac to v_mad.
This fixes a rendering issue with Dirt Rally because a v_mac
instruction with the clamp bit set was converted to a v_mad
but that bit was lost during the conversion.
Fixes: e184e01dd79 ("AMDGPU: Fold FP clamp as modifier bit")
Patch by Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 297556
This method inverts the Reason field of a scheduling candidate.
It does right comparison between RegCritical and RegExcess, but
everything else is broken. In fact it can prefer less strong reason
such as Weak over RegCritical because Weak > -RegCritical.
The CandReason enum is properly sorted, so just remove artificial
ranking.
Differential Revision: https://reviews.llvm.org/D30557
llvm-svn: 297536
If there is only one successor, and that successor only
has one predecessor the wait can obviously be delayed until
uses or the end of the next block. This avoids code quality
regressions when there are trivial fallthrough blocks inserted
for structurization.
llvm-svn: 297251
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
Added code to check constant bus restrictions for VOP formats (only one SGPR value or literal-constant may be used by the instruction).
Note that the same checks are performed by SIInstrInfo::verifyInstruction (used by lowering code).
Added LIT tests.
llvm-svn: 296873
It's not clear to me if this is always better than
doing ds_write2_b64 This adds the constraint of
a 128-bit register input instead of a pair of
64-bit.
llvm-svn: 296512
If during scheduling we have identified that we cannot keep optimistic
occupancy increase critical register pressure limit and try scheduling
of the whole function again. In this case blocks with smaller pressure
will have a chance for better scheduling.
Differential Revision: https://reviews.llvm.org/D30442
llvm-svn: 296506
This change introduces new method to estimate register pressure in
GCNScheduler. Standard RPTracker gives huge error due to the following
reasons:
1. It does not account for live-ins or live-outs if value is not used
in the region itself. That creates a huge error in a very common case
if there are a lot of live-thu registers.
2. It does not properly count subregs.
3. It assumes a register used as an input operand can be reused as an
output. This is not always possible by itself, this is not what RA
will finally do in many cases for various reasons not limited to RA's
inability to do so, and this is not so if the value is actually a
live-thu.
In addition we can now see clear separation between live-in pressure
which we cannot change with the scheduling and tentative pressure
which we can change.
Differential Revision: https://reviews.llvm.org/D30439
llvm-svn: 296491
If two subregs of the same register are defined and we need to revert
schedule changing def order, we will end up with both instructions
having def,read-undef flags because adjustLaneLiveness() will only set
this flag but will not remove it.
Fix this by removing read-undef flags before calling adjustLaneLiveness.
Differential Revision: https://reviews.llvm.org/D30428
llvm-svn: 296484
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 296474
- Verify that runtime metadata is actually valid runtime metadata when assembling, otherwise we could accept the following when assembling, but ocl runtime will reject it:
.amdgpu_runtime_metadata
{ amd.MDVersion: [ 2, 1 ], amd.RandomUnknownKey, amd.IsaInfo: ...
- Make IsaInfo optional, and always emit it.
Differential Revision: https://reviews.llvm.org/D30349
llvm-svn: 296324
Marek Olsak