Summary:
Add a combine for creating a truncate to replace a build_vector composed of extracts with
indices that form a stride-2^N series.
Example:
v8i32 V = ...
v4i32 build_vector((extract_elt V, 0), (extract_elt V, 2), (extract_elt V, 4), (extract_elt V, 6))
-->
v4i32 truncate (bitcast V to v4i64)
Related discussion in llvm-dev about canonicalizing shuffles to
truncates in LLVM IR:
http://lists.llvm.org/pipermail/llvm-dev/2017-January/108936.html.
Reviewers: spatel, RKSimon, efriedma, igorb, craig.topper, wolfgangp, delena
Reviewed By: delena
Subscribers: guyblank, delena, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D34077
llvm-svn: 307036
We are combining shuffles to bit shifts before unary permutes, which means we can't fold loads plus the destination register is destructive
llvm-svn: 306978
We are combining shuffles to bit shifts before unary permutes, which means we can't fold loads plus the destination register is destructive
The 32-bit shuffles are a bit tricky and will be dealt with in a later patch
llvm-svn: 306977
this patch updates the cost of addq\subq (add\subtract of vectors of 64bits)
based on the performance numbers of SLM arch.
Differential Revision: https://reviews.llvm.org/D33983
llvm-svn: 306974
Summary: Support G_GLOBAL_VALUE operation. For now most of the PIC configurations not implemented yet.
Reviewers: zvi, guyblank
Reviewed By: guyblank
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34738
Conflicts:
test/CodeGen/X86/GlobalISel/regbankselect-X86_64.mir
llvm-svn: 306972
Summary:
Support vector type G_UNMERGE_VALUES selection.
For now G_UNMERGE_VALUES marked as legal for any type, so nothing to do in legalizer.
Reviewers: t.p.northover, qcolombet, zvi, guyblank
Reviewed By: guyblank
Subscribers: rovka, kristof.beyls, guyblank, llvm-commits
Differential Revision: https://reviews.llvm.org/D33665
llvm-svn: 306971
This enables us to ensure better LTO and code generation in the face of module linking.
Remove a report_fatal_error from the TargetMachine and replace it with an assert in ARMSubtarget - and remove the test that depended on the error. The assertion will still fire in the case that we were reporting before, but error reporting needs to be in front end tools if possible for options parsing.
llvm-svn: 306939
The llvm flag "-hexagon-emit-lookup-tables" guards the generation
of lookup table generated from a switch statement.
Differential Revision: https://reviews.llvm.org/D34819
llvm-svn: 306877
This adds all remaining instructions that were still missing, mostly
privileged and semi-privileged system-level instructions. These are
provided for use with the assembler and disassembler only.
This brings the LLVM assembler / disassembler to parity with the
GNU binutils tools.
llvm-svn: 306876
It looks like there are two target-independent but not GISel instructions that
need legalization, IMPLICIT_DEF and PHI. These are already anomalies since
their operands have important LLTs attached, so to make things more uniform it
seems like a good idea to add generic variants. Starting with G_IMPLICIT_DEF.
llvm-svn: 306875
This patch adds a new LLVM flag -hexagon-emit-jt-text which is defaulted to
"false". The value "true" emits the switch generated jump tables in text section.
Differential Revision: https://reviews.llvm.org/D34820
llvm-svn: 306872
The llvm flag "-hexagon-emit-lookup-tables" guards the generation
of lookup table from a switch statement.
Differential Revision: https://reviews.llvm.org/D34819
llvm-svn: 306869
On big-endian machines the high and low parts of the value accessed by ldrexd
and strexd are swapped around. To account for this we swap inputs and outputs
in ISelLowering.
Patch by Bharathi Seshadri.
llvm-svn: 306865
In particular, use CALL16 (similar to O32) for address loads into T9 for certain
cases. Otherwise use a %got_disp relocation to load the address of a symbol.
Small offsets (small enough to fit in a 16-bit signed immediate) can be used and
are added to the symbol address after it is loaded from the GOT. Larger offsets
are currently unsupported and result in an error from the assembler.
Reviewers: sdardis
Reviewed By: sdardis
Patch by: John Baldwin
Subscribers: llvm-commits, seanbruno, arichardson, emaste, dim
Differential Revision: https://reviews.llvm.org/D33948
llvm-svn: 306831
There are a few instructions provided by the high-word facility (z196)
that we cannot easily exploit for code generation. This patch at least
adds those missing instructions for the assembler and disassembler.
This means that now all nonprivileged instructions up to z13 are
supported by the LLVM assembler / disassembler.
llvm-svn: 306821
In r301116, a custom lowering needed to be introduced to be able to
legalize 8 and 16-bit divisions on ARM targets without a division
instruction, since 2-step legalization (WidenScalar from 8 bit to 32
bit, then Libcall the 32-bit division) doesn't work.
This fixes this and makes this kind of multi-step legalization, where
first the size of the type needs to be changed and then some action is
needed that doesn't require changing the size of the type,
straighforward to specify.
Differential Revision: https://reviews.llvm.org/D32529
llvm-svn: 306806
For networking-type bpf program, it often needs to access
packet data. A context data structure is provided to the bpf
programs with two fields:
u32 data;
u32 data_end;
User can access these two fields with ctx->data and ctx->data_end.
During program verification process, the kernel verifier modifies
the bpf program with loading of actual pointer value from kernel
data structure.
r = ctx->data ===> r = actual data start ptr
r = ctx->data_end ===> r = actual data end ptr
A typical program accessing ctx->data like
char *data_ptr = (char *)(long)ctx->data
will result in a 32-bit load followed by a zero extension.
Such an operation is combined into a single LDW in DAG combiner
as bpf LDW does zero extension automatically.
In cases like the below (which can be a result of global value numbering
and partial redundancy elimination before insn selection):
B1:
u32 a = load-32-bit &ctx->data
u64 pa = zext a
...
B2:
u32 b = load-32-bit &ctx->data
u64 pb = zext b
...
B3:
u32 m = PHI(a, b)
u64 pm = zext m
In B3, "pm = zext m" cannot be removed, which although is legal
from compiler perspective, will generate incorrect code after
kernel verification.
This patch recognizes this pattern and traces through PHI node
to see whether the operand of "zext m" is defined with LDWs or not.
If it is, the "zext m" itself can be removed.
The patch also recognizes the pattern where the load and use of
the load value not in the same basic block, where truncate operation
may be removed as well.
The patch handles 1-byte, 2-byte and 4-byte truncation.
Two test cases are added to verify the transformation happens properly
for the above code pattern.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 306685
This patch fixes a verification error with -verify-machineinstrs while expanding __tls_get_addr by not creating ADJCALLSTACKUP and ADJCALLSTACKDOWN if there is another ADJCALLSTACKUP in this basic block since nesting ADJCALLSTACKUP/ADJCALLSTACKDOWN is not allowed.
Here, ADJCALLSTACKUP and ADJCALLSTACKDOWN are created as a fence for instruction scheduling to avoid _tls_get_addr is scheduled before mflr in the prologue (https://bugs.llvm.org//show_bug.cgi?id=25839). So if another ADJCALLSTACKUP exists before _tls_get_addr, we do not need to create a new ADJCALLSTACKUP.
Differential Revision: https://reviews.llvm.org/D34347
llvm-svn: 306678
The changes are a result of discussion of https://reviews.llvm.org/D33685.
It solves the following problem:
1. We can inform getGEPCost about simplified indices to help it with
calculating the cost. But getGEPCost does not take into account the
context which GEPs are used in.
2. We have getUserCost which can take the context into account but we cannot
inform about simplified indices.
With the changes getUserCost will have access to additional information
as getGEPCost has.
The one parameter getUserCost is also provided.
Differential Revision: https://reviews.llvm.org/D34057
llvm-svn: 306674
Summary:
Support vector type G_MERGE_VALUES selection. For now G_MERGE_VALUES marked as legal for any type, so nothing to do in legalizer.
Split from https://reviews.llvm.org/D33665
Reviewers: qcolombet, t.p.northover, zvi, guyblank
Reviewed By: guyblank
Subscribers: rovka, kristof.beyls, guyblank, llvm-commits
Differential Revision: https://reviews.llvm.org/D33958
llvm-svn: 306665
Summary:
TBB and THH allow using a Thumb GPR or the PC as destination operand.
A few machine verifier failures where due to those instructions not
expecting PC as destination operand.
Add -verify-machineinstrs to test/CodeGen/ARM/jump-table-tbh.ll to add
test coverage even if expensive checks are disabled.
Reviewers: MatzeB, t.p.northover, jmolloy
Reviewed By: MatzeB
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34610
llvm-svn: 306654
Some conditional branch instructions generated by this pass are checking
the wrong condition code. The instructions TBZ and TBNZ are transformed
into B.GE and B.LT instead of B.PL and B.MI respectively. They should
only be checking the Negative bit.
Differential Revision: https://reviews.llvm.org/D34743
llvm-svn: 306550
The current heuristic in isProfitableToIfCvt assumes we have a branch predictor,
and so gives the wrong answer in some cases when we don't. This patch adds a
subtarget feature to indicate that a subtarget has no branch predictor, and
changes the heuristic in isProfitableToiIfCvt when it's present. This gives a
slight overall improvement in a set of embedded benchmarks on Cortex-M4 and
Cortex-M33.
Differential Revision: https://reviews.llvm.org/D34398
llvm-svn: 306547
CFI instructions that set appropriate cfa offset and cfa register are now
inserted in emitEpilogue() in X86FrameLowering.
Majority of the changes in this patch:
1. Ensure that CFI instructions do not affect code generation.
2. Enable maintaining correct information about cfa offset and cfa register
in a function when basic blocks are reordered, merged, split, duplicated.
These changes are target independent and described below.
Changed CFI instructions so that they:
1. are duplicable
2. are not counted as instructions when tail duplicating or tail merging
3. can be compared as equal
Add information to each MachineBasicBlock about cfa offset and cfa register
that are valid at its entry and exit (incoming and outgoing CFI info). Add
support for updating this information when basic blocks are merged, split,
duplicated, created. Add a verification pass (CFIInfoVerifier) that checks
that outgoing cfa offset and register of predecessor blocks match incoming
values of their successors.
Incoming and outgoing CFI information is used by a late pass
(CFIInstrInserter) that corrects CFA calculation rule for a basic block if
needed. That means that additional CFI instructions get inserted at basic
block beginning to correct the rule for calculating CFA. Having CFI
instructions in function epilogue can cause incorrect CFA calculation rule
for some basic blocks. This can happen if, due to basic block reordering,
or the existence of multiple epilogue blocks, some of the blocks have wrong
cfa offset and register values set by the epilogue block above them.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D18046
llvm-svn: 306529
The benchmarking summarized in
http://lists.llvm.org/pipermail/llvm-dev/2017-May/113525.html showed
this is beneficial for a wide range of cores.
As is to be expected, quite a few small adaptations are needed to the
regressions tests, as the difference in scheduling results in:
- Quite a few small instruction schedule differences.
- A few changes in register allocation decisions caused by different
instruction schedules.
- A few changes in IfConversion decisions, due to a difference in
instruction schedule and/or the estimated cost of a branch mispredict.
llvm-svn: 306514
Summary:
This is the llvm part of the initial implementation to support Windows ARM64 COFF format.
I will gradually add more functionality in subsequent patches.
Reviewers: ruiu, rnk, t.p.northover, compnerd
Reviewed By: ruiu, compnerd
Subscribers: aemerson, mgorny, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D34705
llvm-svn: 306490
This patch enables significant performance enhancements to the
Cavium ThunderX2T99 LLVM backend, as observed by running SPEC2K6,
by adding more detailed scheduling information.
Related Bugzilla bug: http://bugs.llvm.org/show_bug.cgi?id=32562
Patch by: steleman
Differential Revision: https://reviews.llvm.org/D31801
llvm-svn: 306462
Depending on the compare code that can be either an argument of
sext or negate of it. This helps to avoid v_cndmask_b64 instruction
for sext. A reversed value can be further simplified and folded into
its parent comparison if possible.
Differential Revision: https://reviews.llvm.org/D34545
llvm-svn: 306446
Also factored out function to check if a boolean is an already
deserialized value which does not require v_cndmask_b32 to be
loaded. Added binary logical operators to its check.
Differential Revision: https://reviews.llvm.org/D34500
llvm-svn: 306439
•static latency
•number of uOps from which the instructions consists
•all ports used by the instruction
Reviewers:
RKSimon
zvi
aymanmus
m_zuckerman
Differential Revision: https://reviews.llvm.org/D33897
llvm-svn: 306414
Summary:
1. Instruction V_CVT_U32_F32 allow omod operand (see SIInstrInfo.td:1435). In fact this operand shouldn't be allowed here. This fix checks if SDWA pseudo instruction has OMod operand and then copy it.
2. There were several problems with support of VOPC instructions in SDWA peephole pass.
Reviewers: tstellar, arsenm, vpykhtin, airlied, kzhuravl
Subscribers: wdng, nhaehnle, yaxunl, dstuttard, tpr, sarnex, t-tye
Differential Revision: https://reviews.llvm.org/D34626
llvm-svn: 306413
This patch modifies the conditional compares pass so that it keeps successor
probabilities up-to-date after the conversion. Previously, successor
probabilities were being normalized to a uniform distribution, even though they
may have been heavily biased prior to the conversion (e.g., if one of the edges
was the back edge of a loop). This loss of information affected passes later in
the pipeline.
Differential Revision: https://reviews.llvm.org/D34109
llvm-svn: 306412
Add the instruction aliases for ds(r|l)l for the two operand alias
of ds(r|l)lv and the aliases ds(r|l)l with the three register operands.
llvm-svn: 306405
[X86][AVX512] Improve lowering of AVX512 compare intrinsics (remove redundant shift left+right instructions).
AVX512 compare instructions return v*i1 types.
In cases where the number of elements in the returned value are less than 8, clang adds zeroes to get a mask of v8i1 type.
Later on it's replaced with CONCAT_VECTORS, which then is lowered to many DAG nodes including insert/extract element and shift right/left nodes.
The fact that AVX512 compare instructions put the result in a k register and zeroes all its upper bits allows us to remove the extra nodes simply by copying the result to the required register class.
When lowering, identify these cases and transform them into an INSERT_SUBVECTOR node (marked legal), then catch this pattern in instructions selection phase and transform it into one avx512 cmp instruction.
Differential Revision: https://reviews.llvm.org/D33188
llvm-svn: 306402
Summary:
After this patch, we finally have test cases that require multiple
instruction emission.
Depends on D33590
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls
Subscribers: javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D33596
llvm-svn: 306388
Borrow from the logic for 'jal' in MipsAsmParser::processInstruction
and add the extra condition of bypassing CALL16 if the destination symbol
is an ELF symbol with STB_LOCAL binding.
Patch by: John Baldwin
Reviewers: sdardis
Differential Revision: https://reviews.llvm.org/D33999
llvm-svn: 306387
* Mark as legal for (s32, i1, s32, s32)
* Map everything into GPRs
* Select to two instructions: a CMP of the condition against 0, to set
the flags, and a MOVCCr to select between the two inputs based on the
flags that we've just set
llvm-svn: 306382
Summary:
With scalar stores, M0 is clobbered and therefore marked as implicitly
defined. However, it is also dead.
This fixes an assertion when the Greedy Register Allocator decides to
optimize a spill/restore pair away again (via tryHintsRecoloring).
Reviewers: arsenm
Subscribers: qcolombet, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D33319
llvm-svn: 306375
PowerPC backend does not pass the current optimization level to SelectionDAGISel and so SelectionDAGISel works with the default optimization level regardless of the current optimization level.
This patch makes the PowerPC backend set the optimization level correctly.
Differential Revision: https://reviews.llvm.org/D34615
llvm-svn: 306367
When we forward a stored value to a load and eliminate it entirely we need to
make sure the liveness of the register is maintained all the way to its use.
Previously we only cleared liveness on the store doing the forwarding, but
there could be other killing uses in between.
We already do the right thing when the load has to be converted into something
else, it was just this one path that skipped it.
llvm-svn: 306318
We sometimes need emergency spill slots for the register scavenger.
This may be the case when code needs to access a stack slot that
has an offset of 4096 or more relative to the stack pointer.
To make that determination, processFunctionBeforeFrameFinalized
currently simply checks the total stack frame size of the current
function. But this is not enough, since code may need to access
stack slots in the caller's stack frame as well, in particular
incoming arguments stored on the stack.
This commit fixes the problem by taking argument slots into account.
llvm-svn: 306305
The non-AVX-512 behavior was changed in r248266 to match N1778
(C bindings for IEEE-754 (2008)), which defined the four functions
to not raise the inexact exception ("rint" is still defined as raising
it).
Update the AVX-512 lowering of these functions to match that: it should
not be different.
llvm-svn: 306299
Convert vector increment or decrement to sub/add with an all-ones constant:
add X, <1, 1...> --> sub X, <-1, -1...>
sub X, <1, 1...> --> add X, <-1, -1...>
The all-ones vector constant can be materialized using a pcmpeq instruction that is
commonly recognized as an idiom (has no register dependency), so that's better than
loading a splat 1 constant.
AVX512 uses 'vpternlogd' for 512-bit vectors because there is apparently no better
way to produce 512 one-bits.
The general advantages of this lowering are:
1. pcmpeq has lower latency than a memop on every uarch I looked at in Agner's tables,
so in theory, this could be better for perf, but...
2. That seems unlikely to affect any OOO implementation, and I can't measure any real
perf difference from this transform on Haswell or Jaguar, but...
3. It doesn't look like it from the diffs, but this is an overall size win because we
eliminate 16 - 64 constant bytes in the case of a vector load. If we're broadcasting
a scalar load (which might itself be a bug), then we're replacing a scalar constant
load + broadcast with a single cheap op, so that should always be smaller/better too.
4. This makes the DAG/isel output more consistent - we use pcmpeq already for padd x, -1
and psub x, -1, so we should use that form for +1 too because we can. If there's some
reason to favor a constant load on some CPU, let's make the reverse transform for all
of these cases (either here in the DAG or in a later machine pass).
This should fix:
https://bugs.llvm.org/show_bug.cgi?id=33483
Differential Revision: https://reviews.llvm.org/D34336
llvm-svn: 306289
Simon Pilgrim