Conservatively disable sinking and merging inline-asm instructions as doing so
can potentially create arguments that cannot satisfy the inline-asm constraints.
For example, SimplifyCFG used to do the following transformation:
(before)
if.then:
%0 = call i32 asm "rorl $2, $0", "=&r,0,n"(i32 %r6, i32 8)
br label %if.end
if.else:
%1 = call i32 asm "rorl $2, $0", "=&r,0,n"(i32 %r6, i32 6)
br label %if.end
(after)
%.sink = select i1 %tobool, i32 6, i32 8
%0 = call i32 asm "rorl $2, $0", "=&r,0,n"(i32 %r6, i32 %.sink)
This would result in a crash in the backend since only immediate integer operands
are permitted for constraint "n".
rdar://problem/30110806
Differential Revision: https://reviews.llvm.org/D29111
llvm-svn: 293025
a lazy-asserting PoisoningVH.
AssertVH is fundamentally incompatible with cache-invalidation of
analysis results. The invaliadtion happens after the AssertingVH has
already fired. Instead, use a PoisoningVH that will assert if the
dangling handle is ever used rather than merely be assigned or
destroyed.
This patch also removes all of the (numerous) doomed attempts to work
around this fundamental incompatibility. It is a pretty significant
simplification IMO.
The most interesting change is in the Inliner where we still do some
clearing because we don't want to rely on the coarse grained
invalidation strategy of the containing pass manager. However, I prefer
the approach that contains this logic to the cleanup phase of the
Inliner, and I think we could enhance the CGSCC analysis management
layer to make this even better in the future if desired.
The rest is straight cleanup.
I've also added a test for one of the harder cases to work around: when
a *module analysis* contains many AssertingVHes pointing at functions.
Differential Revision: https://reviews.llvm.org/D29006
llvm-svn: 292928
With this change dominator tree remains in sync after each step of loop
peeling.
Differential Revision: https://reviews.llvm.org/D29029
llvm-svn: 292895
Running non-LCSSA-preserving LoopSimplify followed by LCSSA on (roughly) the
same loop is incorrect, since LoopSimplify may break LCSSA arbitrarily higher
in the loop nest. Instead, run LCSSA first, and then run LCSSA-preserving
LoopSimplify on the result.
This fixes PR31718.
Differential Revision: https://reviews.llvm.org/D29055
llvm-svn: 292854
Summary:
The LibFunc::Func enum holds enumerators named for libc functions.
Unfortunately, there are real situations, including libc implementations, where
function names are actually macros (musl uses "#define fopen64 fopen", for
example; any other transitively visible macro would have similar effects).
Strictly speaking, a conforming C++ Standard Library should provide any such
macros as functions instead (via <cstdio>). However, there are some "library"
functions which are not part of the standard, and thus not subject to this
rule (fopen64, for example). So, in order to be both portable and consistent,
the enum should not use the bare function names.
The old enum naming used a namespace LibFunc and an enum Func, with bare
enumerators. This patch changes LibFunc to be an enum with enumerators prefixed
with "LibFFunc_". (Unfortunately, a scoped enum is not sufficient to override
macros.)
There are additional changes required in clang.
Reviewers: rsmith
Subscribers: mehdi_amini, mzolotukhin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28476
llvm-svn: 292848
the library routine shared with the new PM and other code.
This assert checks that when LCSSA preservation is requested we start in
LCSSA form. Without this early assert, given *very* complex test cases
we can hit an assert or crash much later on when trying to preserve
LCSSA.
The new PM's loop simplify doesn't need to (and indeed can't) preserve
LCSSA as the new PM doesn't deal in transforms in the dependency graph.
But we asked the library to and shockingly, this didn't work very well!
Stop doing that. Now the assert will tell us immediately with existing
test cases. Before this, it took a pretty convoluted input to trigger
this.
However, sinking the assert also found a bug in LoopUnroll where we
asked simplifyLoop to preserve LCSSA *right before we reform it*. That's
kinda silly and unsurprising that it wasn't available. =D Stop doing
that too.
We also would assert that the unrolled loop was in LCSSA even if
preserving LCSSA was never requested! I don't have a test case or
anything here. I spotted it by inspection and it seems quite obvious. No
logic change anyways, that's just avoiding a spurrious assert.
llvm-svn: 292710
This adds the following to the new PM based inliner in PGO mode:
* Use block frequency analysis to derive callsite's profile count and use
that to adjust thresholds of hot and cold callsites.
* Incrementally update the BFI of the caller after a callee gets inlined
into it. This incremental update is only within an invocation of the run
method - BFI is not preserved across calls to run.
Update the function entry count of the callee after inlining it into a
caller.
* I've tuned the thresholds for the hot and cold callsites using a hacked
up version of the old inliner that explicitly computes BFI on a set of
internal benchmarks and spec. Once the new PM based pipeline stabilizes
(IIRC Chandler mentioned there are known issues) I'll benchmark this
again and adjust the thresholds if required.
Inliner PGO support.
Differential revision: https://reviews.llvm.org/D28331
llvm-svn: 292666
Mostly straightforward changes; we just didn't do the computation before.
One sort of interesting change in LoopUnroll.cpp: we weren't handling
dominance for children of the loop latch correctly, but
foldBlockIntoPredecessor hid the problem for complete unrolling.
Currently punting on loop peeling; made some minor changes to isolate
that problem to LoopUnrollPeel.cpp.
Adds a flag -unroll-verify-domtree; it verifies the domtree immediately
after we finish updating it. This is on by default for +Asserts builds.
Differential Revision: https://reviews.llvm.org/D28073
llvm-svn: 292447
We currently check whether a reduction has a single outside user. We don't
really need to require that - we just need to make sure a single value is
used externally. The number of external users of that value shouldn't actually
matter.
Differential Revision: https://reviews.llvm.org/D28830
llvm-svn: 292424
Add missing fabs(fpext) optimzation that worked with the call,
and also fixes it creating a second fpext when there were multiple
uses.
llvm-svn: 292172
a function's CFG when that CFG is unchanged.
This allows transformation passes to simply claim they preserve the CFG
and analysis passes to check for the CFG being preserved to remove the
fanout of all analyses being listed in all passes.
I've gone through and removed or cleaned up as many of the comments
reminding us to do this as I could.
Differential Revision: https://reviews.llvm.org/D28627
llvm-svn: 292054
Summary:
This fixes Transforms/LoopUnroll/runtime-loop3.ll which failed with
EXTENSIVE_DEBUG, because the cloned basic blocks were not added to the
correct sub-loops in LoopUnrollRuntime.cpp.
Reviewers: dexonsmith, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28482
llvm-svn: 291619
Move the code to update LoopInfo for cloned basic blocks to
addClonedBlockToLoopInfo, as suggested in
https://reviews.llvm.org/D28482.
llvm-svn: 291614
Bail out instead of asserting when we encounter this situation,
which can actually happen.
The reason the test uses the new PM is that the "bad" phi, incidentally, gets
cleaned up by LoopSimplify. But LICM can create this kind of phi and preserve
loop simplify form, so the cleanup has no chance to run.
This fixes PR31190.
We may want to solve this in a less conservative manner, since this phi is
actually uniform within the inner loop (or we may want LICM to output a cleaner
promotion to begin with).
Differential Revision: https://reviews.llvm.org/D28490
llvm-svn: 291589
fabs(x * x) is not generally safe to assume x is positive if x is a NaN.
This is also less general than it could be, so this will be replaced
with a transformation on the intrinsic.
llvm-svn: 291359
Summary:
r285871 introduced an assert that was overly aggressive in the case
of a same-named local in different same-named files (in different
directories), where the source name and therefore the GUID ended up
the same because the files were compiled in their own directory without
any leading path. Change the handling in the promotion logic to get
the summary for the version in that module.
This also exposed an issue where we are not always importing the
right copy, which is a performance not correctness issue (because
the renaming is based on the module hash which must be different,
see the bug report for details). I will fix that as a follow-on.
Fixes PR31561.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28411
llvm-svn: 291304
Summary:
This adds a new summary flag NotEligibleToImport that subsumes
several existing flags (NoRename, HasInlineAsmMaybeReferencingInternal
and IsNotViableToInline). It also subsumes the checking of references
on the summary that was being done during the thin link by
eligibleForImport() for each candidate. It is much more efficient to
do that checking once during the per-module summary build and record
it in the summary.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28169
llvm-svn: 291108
This reapplies r289828 (reverted in r289833 as it broke the address sanitizer). The
debugloc is now only set when the instruction is not a call, as this causes the
verifier to assert (the inliner requires an inlinable callsite to have a debug loc
if the caller and callee have debug info).
Original commit message:
Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.
Original review: https://reviews.llvm.org/D27590
llvm-svn: 290973
Summary:
Regardless how the loop body weight is distributed, we should preserve
total loop body weight. i.e. we should have same weight reaching the body of the loop
or its duplicates in peeled and unpeeled case.
Reviewers: mkuper, davidxl, anemet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28179
llvm-svn: 290833
inside of `InlineFunction`. Prior to this, call instructions are
specifically being rewritten and replaced within the inlined region,
invalidating some of the call sites.
Several of these regions are using the same technique to walk the
inlined region so this seems clearly safe up to this point.
I've also added a short circuit to the scan for call sites based on what
other code is doing.
With this, the most common crash I've found in the new inliner code is
fixed. I've turned it on for another test case that covers this
scenario.
I'll make my way through most of the other inliner test cases
just to get some easy coverage next.
llvm-svn: 290562
removing fully-dead comdats without removing dead entries in comdats
with live members.
This factors the core logic out of the current inliner's internals to
a reusable utility and leverages that in both places. The factored out
code should also be (minorly) more efficient in cases where we have very
few dead functions or dead comdats to consider.
I've added a test case to cover this behavior of the always inliner.
This is the last significant bug in the new PM's always inliner I've
found (so far).
llvm-svn: 290557
Make it clear that TripCount is the upper bound of the iteration on which
control exits LatchBlock.
Differential Revision: https://reviews.llvm.org/D26675
llvm-svn: 290199
This doesn't implement *every* feature of the existing inliner, but
tries to implement the most important ones for building a functional
optimization pipeline and beginning to sort out bugs, regressions, and
other problems.
Notable, but intentional omissions:
- No alloca merging support. Why? Because it isn't clear we want to do
this at all. Active discussion and investigation is going on to remove
it, so for simplicity I omitted it.
- No support for trying to iterate on "internally" devirtualized calls.
Why? Because it adds what I suspect is inappropriate coupling for
little or no benefit. We will have an outer iteration system that
tracks devirtualization including that from function passes and
iterates already. We should improve that rather than approximate it
here.
- Optimization remarks. Why? Purely to make the patch smaller, no other
reason at all.
The last one I'll probably work on almost immediately. But I wanted to
skip it in the initial patch to try to focus the change as much as
possible as there is already a lot of code moving around and both of
these *could* be skipped without really disrupting the core logic.
A summary of the different things happening here:
1) Adding the usual new PM class and rigging.
2) Fixing minor underlying assumptions in the inline cost analysis or
inline logic that don't generally hold in the new PM world.
3) Adding the core pass logic which is in essence a loop over the calls
in the nodes in the call graph. This is a bit duplicated from the old
inliner, but only a handful of lines could realistically be shared.
(I tried at first, and it really didn't help anything.) All told,
this is only about 100 lines of code, and most of that is the
mechanics of wiring up analyses from the new PM world.
4) Updating the LazyCallGraph (in the new PM) based on the *newly
inlined* calls and references. This is very minimal because we cannot
form cycles.
5) When inlining removes the last use of a function, eagerly nuking the
body of the function so that any "one use remaining" inline cost
heuristics are immediately refined, and queuing these functions to be
completely deleted once inlining is complete and the call graph
updated to reflect that they have become dead.
6) After all the inlining for a particular function, updating the
LazyCallGraph and the CGSCC pass manager to reflect the
function-local simplifications that are done immediately and
internally by the inline utilties. These are the exact same
fundamental set of CG updates done by arbitrary function passes.
7) Adding a bunch of test cases to specifically target CGSCC and other
subtle aspects in the new PM world.
Many thanks to the careful review from Easwaran and Sanjoy and others!
Differential Revision: https://reviews.llvm.org/D24226
llvm-svn: 290161
Lowering to llvm.cttz() will result in constant folding anyway
if the argument to ffs is a constant. Pointed out by Eli for
fls() in D14590.
llvm-svn: 289888
Now that a new API to merge debug locations has been committed at r289661 (see
review D26256 for more details), we can use it to "improve" the code added by
revision r280995.
Instead of nulling the debugloc of a commoned instruction, we use the 'merged'
debug location. At the moment, this is just a no functional change since
function `DILocation::getMergedLocation()` is just a stub and would always
return a null location.
Differential Revision: https://reviews.llvm.org/D27804
llvm-svn: 289862
Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.
Differential Revision: https://reviews.llvm.org/D27590
llvm-svn: 289828
After r289755, the AssumptionCache is no longer needed. Variables affected by
assumptions are now found by using the new operand-bundle-based scheme. This
new scheme is more computationally efficient, and also we need much less
code...
llvm-svn: 289756
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
When a function F is inlined, InlineFunction extends the debug location of every
instruction inlined from F by adding an InlinedAt.
However, if an instruction has a 'null' debug location, InlineFunction would
propagate the callsite debug location to it. This behavior existed since
revision 210459.
Revision 210459 was originally committed specifically to workaround the lack of
debug information for instructions inlined from intrinsic functions (which are
usually declared with attributes `__always_inline__, __nodebug__`).
The problem with revision 210459 is that it doesn't make any sort of distinction
between instructions inlined from a 'nodebug' function and instructions which
are inlined from a function built with debug info. This issue may lead to
incorrect stepping in the debugger.
This patch works under the assumption that a nodebug function does not have a
DISubprogram. When a function F is inlined into another function G,
InlineFunction checks if F has debug info associated with it.
For nodebug functions, the InlineFunction logic is unchanged (i.e. it would
still propagate the callsite debugloc to the inlined instructions). Otherwise,
InlineFunction no longer propagates the callsite debug location.
Differential Revision: https://reviews.llvm.org/D27462
llvm-svn: 288895
so we can stop using DW_OP_bit_piece with the wrong semantics.
The entire back story can be found here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161114/405934.html
The gist is that in LLVM we've been misinterpreting DW_OP_bit_piece's
offset field to mean the offset into the source variable rather than
the offset into the location at the top the DWARF expression stack. In
order to be able to fix this in a subsequent patch, this patch
introduces a dedicated DW_OP_LLVM_fragment operation with the
semantics that we used to apply to DW_OP_bit_piece, which is what we
actually need while inside of LLVM. This patch is complete with a
bitcode upgrade for expressions using the old format. It does not yet
fix the DWARF backend to use DW_OP_bit_piece correctly.
Implementation note: We discussed several options for implementing
this, including reserving a dedicated field in DIExpression for the
fragment size and offset, but using an custom operator at the end of
the expression works just fine and is more efficient because we then
only pay for it when we need it.
Differential Revision: https://reviews.llvm.org/D27361
rdar://problem/29335809
llvm-svn: 288683
Now that PointerType is no longer a SequentialType, all SequentialTypes
have an associated number of elements, so we can move that information to
the base class, allowing for a number of simplifications.
Differential Revision: https://reviews.llvm.org/D27122
llvm-svn: 288464
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
Summary:
We were doing an optimization in the ThinLTO backends of importing
constant unnamed_addr globals unconditionally as a local copy (regardless
of whether the thin link decided to import them). This should be done in
the thin link instead, so that resulting exported references are marked
and promoted appropriately, but will need a summary enhancement to mark
these variables as constant unnamed_addr.
The function import logic during the thin link was trying to handle
this proactively, by conservatively marking all values referenced in
the initializer lists of exported global variables as also exported.
However, this only handled values referenced directly from the
initializer list of an exported global variable. If the value is itself
a constant unnamed_addr variable, we could end up exporting its
references as well. This caused multiple issues. The first is that the
transitively exported references weren't promoted. Secondly, some could
not be promoted/renamed (e.g. they had a section or other constraint).
recursively, instead of just adding the first level of initializer list
references to the ExportList directly.
Remove this optimization and the associated handling in the function
import backend. SPEC measurements indicate we weren't getting much
from it in any case.
Fixes PR31052.
Reviewers: mehdi_amini
Subscribers: krasin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26880
llvm-svn: 288446
This implements PGO-driven loop peeling.
The basic idea is that when the average dynamic trip-count of a loop is known,
based on PGO, to be low, we can expect a performance win by peeling off the
first several iterations of that loop.
Unlike unrolling based on a known trip count, or a trip count multiple, this
doesn't save us the conditional check and branch on each iteration. However,
it does allow us to simplify the straight-line code we get (constant-folding,
etc.). This is important given that we know that we will usually only hit this
code, and not the actual loop.
This is currently disabled by default.
Differential Revision: https://reviews.llvm.org/D25963
llvm-svn: 288274
analyses to have a common type which is enforced rather than using
a char object and a `void *` type when used as an identifier.
This has a number of advantages. First, it at least helps some of the
confusion raised in Justin Lebar's code review of why `void *` was being
used everywhere by having a stronger type that connects to documentation
about this.
However, perhaps more importantly, it addresses a serious issue where
the alignment of these pointer-like identifiers was unknown. This made
it hard to use them in pointer-like data structures. We were already
dodging this in dangerous ways to create the "all analyses" entry. In
a subsequent patch I attempted to use these with TinyPtrVector and
things fell apart in a very bad way.
And it isn't just a compile time or type system issue. Worse than that,
the actual alignment of these pointer-like opaque identifiers wasn't
guaranteed to be a useful alignment as they were just characters.
This change introduces a type to use as the "key" object whose address
forms the opaque identifier. This both forces the objects to have proper
alignment, and provides type checking that we get it right everywhere.
It also makes the types somewhat less mysterious than `void *`.
We could go one step further and introduce a truly opaque pointer-like
type to return from the `ID()` static function rather than returning
`AnalysisKey *`, but that didn't seem to be a clear win so this is just
the initial change to get to a reliably typed and aligned object serving
is a key for all the analyses.
Thanks to Richard Smith and Justin Lebar for helping pick plausible
names and avoid making this refactoring many times. =] And thanks to
Sean for the super fast review!
While here, I've tried to move away from the "PassID" nomenclature
entirely as it wasn't really helping and is overloaded with old pass
manager constructs. Now we have IDs for analyses, and key objects whose
address can be used as IDs. Where possible and clear I've shortened this
to just "ID". In a few places I kept "AnalysisID" to make it clear what
was being identified.
Differential Revision: https://reviews.llvm.org/D27031
llvm-svn: 287783
This patch fixes the non-determinism caused due to iterating SmallPtrSet's
which was uncovered due to the experimental "reverse iteration order " patch:
https://reviews.llvm.org/D26718
The following unit tests failed because of the undefined order of iteration.
LLVM :: Transforms/Util/MemorySSA/cyclicphi.ll
LLVM :: Transforms/Util/MemorySSA/many-dom-backedge.ll
LLVM :: Transforms/Util/MemorySSA/many-doms.ll
LLVM :: Transforms/Util/MemorySSA/phi-translation.ll
Reviewers: dberlin, mgrang
Subscribers: dberlin, llvm-commits, david2050
Differential Revision: https://reviews.llvm.org/D26704
llvm-svn: 287563
insertUniqueBackedgeBlock in lib/Transforms/Utils/LoopSimplify.cpp now
propagates existing llvm.loop metadata to newly the added backedge.
llvm::TryToSimplifyUncondBranchFromEmptyBlock in lib/Transforms/Utils/Local.cpp
now propagates existing llvm.loop metadata to the branch instructions in the
predecessor blocks of the empty block that is removed.
Differential Revision: https://reviews.llvm.org/D26495
llvm-svn: 287341
This patch updates a bunch of places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287206
Summary:
For flat loop, even if it is hot, it is not a good idea to unroll in runtime, thus we set a lower partial unroll threshold.
For hot loop, we set a higher unroll threshold and allows expensive tripcount computation to allow more aggressive unrolling.
Reviewers: davidxl, mzolotukhin
Subscribers: sanjoy, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D26527
llvm-svn: 287186
Summary:
We don't do BypassSlowDivision when the denominator is a constant, but
we do do it when the numerator is a constant.
This patch makes two related changes to BypassSlowDivision when the
numerator is a constant:
* If the numerator is too large to fit into the bypass width, don't
bypass slow division (because we'll never run the smaller-width
code).
* If we bypass slow division where the numerator is a constant, don't
OR together the numerator and denominator when determining whether
both operands fit within the bypass width. We need to check only the
denominator.
Reviewers: tra
Subscribers: llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D26699
llvm-svn: 287062
This adds support for TSan C++ exception handling, where we need to add extra calls to __tsan_func_exit when a function is exitted via exception mechanisms. Otherwise the shadow stack gets corrupted (leaked). This patch moves and enhances the existing implementation of EscapeEnumerator that finds all possible function exit points, and adds extra EH cleanup blocks where needed.
Differential Revision: https://reviews.llvm.org/D26177
llvm-svn: 286893
Summary:
We have always speculatively promoted all renamable local values
(except const non-address taken variables) for both the exporting
and importing module. We would then internalize them back based on
the ThinLink results if they weren't actually exported. This is
inefficient, and results in unnecessary renames. It also meant we
had to check the non-renamability of a value in the summary, which
was already checked during function importing analysis in the ThinLink.
Made renameModuleForThinLTO (which does the promotion/renaming) instead
use the index when exporting, to avoid unnecessary renames/promotions.
For importing modules, we can simply promoted all values as any local
we import by definition is exported and needs promotion.
This required changes to the method used by the FunctionImport pass
(only invoked from 'opt' for testing) and when invoked from llvm-link,
since neither does a ThinLink. We simply conservatively mark all locals
in the index as promoted, which preserves the current aggressive
promotion behavior.
I also needed to change an llvm-lto based test where we had previously
been aggressively promoting values that weren't importable (aliasees),
but now will not promote.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26467
llvm-svn: 286871
This is a follow-up on the recent refactoring of the FunctionMerge pass.
It should fix a fail of the new FunctionComparator unittest whe compiling with MSVC.
llvm-svn: 286648
This is pure refactoring. NFC.
This change moves the FunctionComparator (together with the GlobalNumberState
utility) in to a separate file so that it can be used by other passes.
For example, the SwiftMergeFunctions pass in the Swift compiler:
https://github.com/apple/swift/blob/master/lib/LLVMPasses/LLVMMergeFunctions.cpp
Details of the change:
*) The big part is just moving code out of MergeFunctions.cpp into FunctionComparator.h/cpp
*) Make FunctionComparator member functions protected (instead of private)
so that a derived comparator class can use them.
Following refactoring helps to share code between the base FunctionComparator
class and a derived class:
*) Add a beginCompare() function
*) Move some basic function property comparisons into a separate function compareSignature()
*) Do the GEP comparison inside cmpOperations() which now has a new
needToCmpOperands reference parameter
https://reviews.llvm.org/D25385
llvm-svn: 286632
For example, it invalidates the domtree, causing assertions
in later passes which need dominator infos. Make it preserve
GlobalsAA, as suggested by Eli.
Differential Revision: https://reviews.llvm.org/D26381
llvm-svn: 286271
From experiments, discriminator is rarely greater than 127. Here we enforce it to be no greater than 127 so that it will always fit in 1 byte.
llvm-svn: 286245
Summary:
The recent change I made to consult the summary when deciding whether to
rename (to handle inline asm) in r285513 broke the distributed build
case. In a distributed backend we will only have a portion of the
combined index, specifically for imported modules we only have the
summaries for any imported definitions. When renaming on import we were
asserting because no summary entry was found for a local reference being
linked in (def wasn't imported).
We only need to consult the summary for a renaming decision for the
exporting module. For imports, we would have prevented importing any
references to NoRename values already.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26250
llvm-svn: 285871
Summary:
Instead of using the workaround of suppressing the entire index for
modules that call inline asm that may reference locals, use the
NoRename flag on the summary for any locals in the llvm.used set, and
add a reference edge from any functions containing inline asm.
This avoids issues from having no summaries despite the module defining
global values, which was preventing more aggressive index-based
optimization. It will be followed by a subsequent patch to make a
similar fix for local references in module level asm (to fix PR30610).
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26121
llvm-svn: 285513
Summary:
Replace the check of whether a GV has a section with the flag check
in the summary. This is in preparation for using the NoPromote flag
to convey other situations when we can't promote (e.g. locals used in
inline asm).
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26063
llvm-svn: 285507
Summary:
This "pass" eagerly creates div and rem instructions even when only one
is needed -- it relies on a later pass (machine DCE?) to clean them up.
This is problematic not just from a cleanliness perspective (this pass
is running during CodeGenPrepare, so should leave the IR in a better
state), but it also creates a problem for instruction selection. If we
always have a div+rem, isel will always select a divrem instruction (if
possible), even when a single div or rem would do.
Specifically, in NVPTX, we want to compute rem from the output of div,
if available. But if a div is not available, we want to leave the rem
alone. This transformation is overeager if div is always available.
Because this code runs as part of CodeGenPrepare, it's nontrivial to
write a test for this change. But this will effectively be tested by
a later patch which adds the aforementioned change to NVPTX isel.
Reviewers: tra
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26088
llvm-svn: 285460
Summary:
In BypassSlowDivision's short-dividend path, we would create e.g.
udiv exact i32 %a, %b
"exact" here means that we are asserting that %a is a multiple of %b.
But we have no reason to believe this must be true -- this is just a
bug, as far as I can tell.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D26097
llvm-svn: 285459
Now LPPassManager will run LCSSA verification only for the top-level loop
which was processed on the current iteration.
Differential Revision: https://reviews.llvm.org/D25873
llvm-svn: 285394
Summary: This patch introduces updateDiscriminator to DILocation so that it can be directly called by AddDiscriminator. It also makes it easier to update the discriminator later.
Reviewers: dnovillo, dblaikie, aprantl, echristo
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25959
llvm-svn: 285207
This adds a new function to DebugInfo.cpp that takes an llvm::Module
as input and removes all debug info metadata that is not directly
needed for line tables, thus effectively stripping all type and
variable information from the module.
The primary motivation for this feature was the bitcode work flow
(cf. http://lists.llvm.org/pipermail/llvm-dev/2016-June/100643.html
for more background). This is not wired up yet, but will be in
subsequent patches. For testing, the new functionality is exposed to
opt with a -strip-nonlinetable-debuginfo option.
The secondary use-case (and one that works right now!) is as a
reduction pass in bugpoint. I added two new bugpoint options
(-disable-strip-debuginfo and -disable-strip-debug-types) to control
the new features. By default it will first attempt to remove all debug
information, then only the type info, and then proceed to hack at any
remaining MDNodes.
Thanks to Adrian Prantl for stewarding this patch!
llvm-svn: 285094
This fixes a bug in the handling of lexical scopes, when more than one
scope is defined on the same line or functions are inlined into call
sites that are on the same line as the function definition. This
situation can easily happen in macro expansions.
The problem is solved by introducing a SmallDenseMap<DIScope *,
DILexicalBlockFile *, 1> that keeps track of all the different lexical
scopes that share a line/file location.
Fixes PR30681.
llvm-svn: 284998
Summary:
Utility pass to remove gc.relocates created by rewrite statepoints for GC.
With respect to safepoint verification, the IR generated would be incorrect, and cannot run
as such.
This would be a single transformation on the final optimized IR.
The benefit of the pass is for easy analysis when the IRs are 'polluted' by too
many gc.relocates.
Added tests.
test run: All RS4GC tests with -verify option. Local downstream tests on large
IR files. This also works when the pointer being gc.relocated is another
gc.relocate.
Reviewers: sanjoy, reames
Subscribers: beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D25096
llvm-svn: 284855
When we have a loop with a known upper bound on the number of iterations, and
furthermore know that either the number of iterations will be either exactly
that upper bound or zero, then we can fully unroll up to that upper bound
keeping only the first loop test to check for the zero iteration case.
Most of the work here is in plumbing this 'max-or-zero' information from the
part of scalar evolution where it's detected through to loop unrolling. I've
also gone for the safe default of 'false' everywhere but howManyLessThans which
could probably be improved.
Differential Revision: https://reviews.llvm.org/D25682
llvm-svn: 284818
Summary:
This allows us to mark when uses have been optimized.
This lets us avoid rewalking (IE when people call getClobberingAccess on everything), and also
enables us to later relax the requirement of use optimization during updates with less cost.
Reviewers: george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25172
llvm-svn: 284771
All of these existed because MSVC 2013 was unable to synthesize default
move ctors. We recently dropped support for it so all that error-prone
boilerplate can go.
No functionality change intended.
llvm-svn: 284721
Summary:
This pass shrink-wraps a condition to some library calls where the call
result is not used. For example:
sqrt(val);
is transformed to
if (val < 0)
sqrt(val);
Even if the result of library call is not being used, the compiler cannot
safely delete the call because the function can set errno on error
conditions.
Note in many functions, the error condition solely depends on the incoming
parameter. In this optimization, we can generate the condition can lead to
the errno to shrink-wrap the call. Since the chances of hitting the error
condition is low, the runtime call is effectively eliminated.
These partially dead calls are usually results of C++ abstraction penalty
exposed by inlining. This optimization hits 108 times in 19 C/C++ programs
in SPEC2006.
Reviewers: hfinkel, mehdi_amini, davidxl
Subscribers: modocache, mgorny, mehdi_amini, xur, llvm-commits, beanz
Differential Revision: https://reviews.llvm.org/D24414
llvm-svn: 284542
Summary: Debug info should *not* affect code generation. This patch properly handles debug info to make sure the generated code are the same with or without debug info.
Reviewers: davidxl, mzolotukhin, jmolloy
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D25286
llvm-svn: 284415
Not all ConstantExprs can be represented by a global variable, for example most
pointer arithmetic other than addition of a constant, so we can't convert these
values from switch statements to lookup tables.
Differential Revision: https://reviews.llvm.org/D25550
llvm-svn: 284379
BasicBlock::size is O(insts), making this loop O(blocks*insts), which
can be really slow on generated code. getPrevNode already checks if
we're at the beginning of the block and returns nullptr if so, just use
that instead. No functionality change intended.
llvm-svn: 284303
This is with an extra change to avoid calling MemoryLocation::get() on a call instruction.
Differential Revision: https://reviews.llvm.org/D25542
llvm-svn: 284098
This CL didn't actually address the test case in PR30499, and clang
still crashes.
Also revert dependent change "Memory-SSA cleanup of clobbers interface, NFC"
Reverts r283965 and r283967.
llvm-svn: 284093
Reappy r284044 after revert in r284051. Krzysztof fixed the error in r284049.
The original summary:
This patch tries to fully unroll loops having break statement like this
for (int i = 0; i < 8; i++) {
if (a[i] == value) {
found = true;
break;
}
}
GCC can fully unroll such loops, but currently LLVM cannot because LLVM only
supports loops having exact constant trip counts.
The upper bound of the trip count can be obtained from calling
ScalarEvolution::getMaxBackedgeTakenCount(). Part of the patch is the
refactoring work in SCEV to prevent duplicating code.
The feature of using the upper bound is enabled under the same circumstance
when runtime unrolling is enabled since both are used to unroll loops without
knowing the exact constant trip count.
llvm-svn: 284053
This patch tries to fully unroll loops having break statement like this
for (int i = 0; i < 8; i++) {
if (a[i] == value) {
found = true;
break;
}
}
GCC can fully unroll such loops, but currently LLVM cannot because LLVM only
supports loops having exact constant trip counts.
The upper bound of the trip count can be obtained from calling
ScalarEvolution::getMaxBackedgeTakenCount(). Part of the patch is the
refactoring work in SCEV to prevent duplicating code.
The feature of using the upper bound is enabled under the same circumstance
when runtime unrolling is enabled since both are used to unroll loops without
knowing the exact constant trip count.
Differential Revision: https://reviews.llvm.org/D24790
llvm-svn: 284044
Summary:
Constant bundle operands may need to retain their constant-ness for
correctness. I'll admit that this is slightly odd, but it looks like
SimplifyCFG already does this for things like @llvm.frameaddress and
@llvm.stackmap, so I suppose adding one more case is not a big deal.
It is possible to add a mechanism to denote bundle operands that need to
remain constants, but that's probably too complicated for the time
being.
Reviewers: jmolloy
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D25502
llvm-svn: 284028
This implements the cleanup that Danny asked to commit separately from the
previous fix to GVN-hoist in https://reviews.llvm.org/D25476#inline-219818
Tested with ninja check on x86_64-linux.
llvm-svn: 283967
This is a refreshed version of a patch that was reverted: it fixes
the problems reported in both PR30216 and PR30499, and
contains all the test-cases from both bugs.
To hoist stores past loads, we used to search for potential
conflicting loads on the hoisting path by following a MemorySSA
def-def link from the store to be hoisted to the previous
defining memory access, and from there we followed the def-use
chains to all the uses that occur on the hoisting path. The
problem is that the def-def link may point to a store that does
not alias with the store to be hoisted, and so the loads that are
walked may not alias with the store to be hoisted, and even as in
the testcase of PR30216, the loads that may alias with the store
to be hoisted are not visited.
The current patch visits all loads on the path from the store to
be hoisted to the hoisting position and uses the alias analysis
to ask whether the store may alias the load. I was not able to
use the MemorySSA functionality to ask for whether load and
store are clobbered: I'm not sure which function to call, so I
used a call to AA->isNoAlias().
Store past store is still working as before using a MemorySSA
query: I added an extra test to pr30216.ll to make sure store
past store does not regress.
Tested on x86_64-linux with check and a test-suite run.
Differential Revision: https://reviews.llvm.org/D25476
llvm-svn: 283965
For each block check that it doesn't have any uses outside of it's innermost loop.
Differential Revision: https://reviews.llvm.org/D25364
llvm-svn: 283877
Summary: -fsample-profile needs discriminator, which will not be added if built with -g0. This patch makes sure the discriminator is added for sample-profile at -g0. A followup patch will be send out to update clang tests.
Reviewers: davidxl, dblaikie, echristo, dnovillo
Subscribers: mehdi_amini, probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D25132
llvm-svn: 283565
With the ROPI and RWPI relocation models we can't always have pointers
to global data or functions in constant data, so don't try to convert switches
into lookup tables if any value in the lookup table would require a relocation.
We can still safely emit lookup tables of other values, such as simple
constants.
Differential Revision: https://reviews.llvm.org/D24462
llvm-svn: 283530
GetCaseResults assumed that a terminator with one successor was an
unconditional branch. This is not necessarily the case, it could be a
cleanupret.
Strengthen the check by querying whether or not the terminator is
exceptional.
llvm-svn: 283517
This adds a new function to DebugInfo.cpp that takes an llvm::Module
as input and removes all debug info metadata that is not directly
needed for line tables, thus effectively stripping all type and
variable information from the module.
The primary motivation for this feature was the bitcode work flow
(cf. http://lists.llvm.org/pipermail/llvm-dev/2016-June/100643.html
for more background). This is not wired up yet, but will be in
subsequent patches. For testing, the new functionality is exposed to
opt with a -strip-nonlinetable-debuginfo option.
The secondary use-case (and one that works right now!) is as a
reduction pass in bugpoint. I added two new bugpoint options
(-disable-strip-debuginfo and -disable-strip-debug-types) to control
the new features. By default it will first attempt to remove all debug
information, then only the type info, and then proceed to hack at any
remaining MDNodes.
llvm-svn: 283473
LLVM developers might be surprised to learn that there are blocks
without valid insertion points (catchswitch), so it seems worth calling
that out explicitly. Also add a FIXME about what we should really be
doing if we ever need to make optimized Windows EH code debuggable.
While I'm here, make auto usage more consistent with LLVM standards and
avoid an unecessary call to insertBefore.
llvm-svn: 282521
Return early from llvm::isSafeToDestroyConstant() whenever the value
`isa<ConstantData>()`. These constants are shared across the
LLVMContext. We never really want to delete them here, and walking
their use-lists can be very expensive.
(This is motivated by an eventual goal of removing use-lists entirely
from ConstantData.)
llvm-svn: 282320
The additional fix is:
When adding debug information to a lowered phi node in mem2reg
check that we have a valid insertion point after the phi for adding
the debug information.
This change addresses the issue in pr30468 where a lowered phi was
added before a catchswitch and no debug information should be added
after the phi in this case.
Differential Revision: https://reviews.llvm.org/D24797
llvm-svn: 282155
The routines llvm::ConvertDebugDeclareToDebugValue() always returned
a true value which was never checked at the call site; change the
function return type to void.
This NFC cleanup was approved in the review https://reviews.llvm.org/D23715
llvm-svn: 281964
When looking at the scribus_1.3 example from https://llvm.org/bugs/show_bug.cgi?id=10584, I noticed that we were spending a large amount of time computing loop exits in LCSSA. This code appears to be written with the assumption that LoopExits are stored in the Loop and thus cheap to query. This is not true, so we should cache the result across the potentially long running loop which tends to visit a small handful of Loops.
On the particular example from 10584, this change drops the time spent in LCSSA computation by about 80%.
Differential Revision: https://reviews.llvm.org/D24509
llvm-svn: 281949
When phi nodes are created in the -mem2reg phase, the @llvm.dbg.declare
entries are converted to @llvm.dbg.value entries at the place where the
store instructions existed. However no entry is created to describe
the resulting value of the phi node.
The effect of this is especially noticeable in for loops which have a
constant for the intial value; the loop control variable's location
would be described as the intial constant value in the loop body once
the -mem2reg optimization phase was run.
This change adds the creation of the @llvm.dbg.value entries to describe
variables whose location is the result of a phi node created in -mem2reg.
Also when the phi node is finally lowered to a machine instruction it
is important that the lowered "load" instruction is placed before the
associated DEBUG_VALUE entry describing the value loaded.
Differential Revision: https://reviews.llvm.org/D23715
llvm-svn: 281895
We were updating metadata but not IR flags. Because we pick an arbitrary instruction to be the CSE candidate, it comes down to luck (50% or less chance) if this results in broken codegen or not, which is why PR30373 which is actually not the fault of the commit it was bisected down to.
Fixes PR30373.
llvm-svn: 281889
A follow-up patch will rename this pass and the source file accordingly,
but I figured the non-NFC change will be easier to spot in isolation.
Differential Revision: https://reviews.llvm.org/D24641
llvm-svn: 281744
Teach SimplifyLibcalls that in can treat functions annotated with
apcs, aapcs or aapcs_vfp like normal C functions if they only take
and return integer or pointer values, and the target is not iOS.
Differential Revision: https://reviews.llvm.org/D24453
llvm-svn: 281322
This should *actually* fix PR30244. This cranks up the workaround for PR30188 so that we never sink loads or stores of allocas.
The idea is that these should be removed by SROA/Mem2Reg, and any movement of them may well confuse SROA or just cause unwanted code churn. It's not ideal that the midend should be crippled like this, but that unwanted churn can really cause significant regressions in important workloads (tsan).
llvm-svn: 281162
Exposed by PR30244, we will split a block currently if we think we can sink at least one instruction. However this isn't right - the reason we split predecessors is so that we can sink instructions that otherwise couldn't be sunk because it isn't safe to do so - stores, for example.
So, change the heuristic to only split if it thinks it can sink at least one non-speculatable instruction.
Should fix PR30244.
llvm-svn: 281160
This would create a bitcast use which fails the verifier: swifterror values may
only be used by loads, stores, and as function arguments.
rdar://28233244
llvm-svn: 281114
Summary: The hoisted instruction is executed speculatively. It could affect the debugging experience as user would see gdb go into code that may not be expected to execute. It will also affect sample profile accuracy by assigning incorrect frequency to source within then/else branch.
Reviewers: davidxl, dblaikie, chandlerc, kcc, echristo
Subscribers: mehdi_amini, probinson, eric_niebler, andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D24164
llvm-svn: 280995
Refactor replaceDominatedUsesWith to have a flag to control whether to replace uses in BB itself.
Summary: This is in preparation for LoopSink pass which calls replaceDominatedUsesWith to update after sinking.
llvm-svn: 280949
Summary:
When cloning blocks for prologue/epilogue we need to replicate the loop
structure from the original loop. It wasn't a problem for the innermost
loops, but it led to an incorrect loop info when we unrolled a loop with
a child loop - in this case created prologue-loop had a child loop, but
loop info didn't reflect that.
This fixes PR28888.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits, silvas
Differential Revision: https://reviews.llvm.org/D24203
llvm-svn: 280901
We can't create metadata-valued PHIs; don't try to do so when sinking.
I created a test case for this using the @llvm.type.test intrinsic, because it
takes a metadata parameter and does not have severe side effects (thus
SimplifyCFG is willing to otherwise sink it).
Previously, running the test case would crash with:
Invalid use of metadata!
%.sink = select i1 %flag, metadata <...>, metadata <0x4e45dc0>
LLVM ERROR: Broken function found, compilation aborted!
llvm-svn: 280866
In failure cases it's not guaranteed that the PHI we're inspecting is actually in the successor block! In this case we need to bail out early, and never query getIncomingValueForBlock() as that will cause an assert.
llvm-svn: 280794
I should have realised this the first time around, but if we're avoiding sinking stores where the operands come from allocas so they don't create selects, we also have to do the same for loads because SROA will be just as defective looking at loads of selected addresses as stores.
Fixes PR30188 (again).
llvm-svn: 280792
PR30292 showed a case where our PHI checking wasn't correct. We were checking that all values were used by the same PHI before deciding to sink, but we weren't checking that the incoming values for that PHI were what we expected. As a result, we had to bail out after block splitting which caused us to never reach a steady state in SimplifyCFG.
Fixes PR30292.
llvm-svn: 280790
Summary:
The inliner may need to determine where a given funclet unwinds to,
and this determination may depend on other funclets throughout the
funclet tree. The code that performs this walk in getUnwindDestToken
memoizes results to avoid redundant computations. In the case that
a funclet's unwind destination is derived from its ancestor, there's
code to walk back down the tree from the ancestor updating the memo
map of its descendants to record the unwind destination. This change
fixes that code to account for the case that some descendant has a
different unwind destination, which can happen if that unwind dest
is a descendant of the EHPad being queried and thus didn't determine
its unwind destination.
Also update test inline-funclets.ll, which is supposed to cover such
scenarios, to include a case that fails an assertion without this fix
but passes with it.
Fixes PR29151.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24117
llvm-svn: 280610
We're sinking stores, which is a good thing, but in the process creating selects for the store address operand, which SROA/Mem2Reg can't look through, which caused serious regressions.
The real fix is in SROA, which I'll be looking into.
llvm-svn: 280470
Summary: This is in preparation for LoopSink pass which calls replaceDominatedUsesWith to update after sinking.
Reviewers: chandlerc, davidxl, danielcdh
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24170
llvm-svn: 280427
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280364
r279460 rewrote this function to be able to handle more than two incoming edges and took pains to ensure this didn't regress anything.
This time we change the logic for determining if an instruction should be sunk. Previously we used a single pass greedy algorithm - sink instructions until one requires more than one PHI node or we run out of instructions to sink.
This had the problem that sinking instructions that had non-identical but trivially the same operands needed extra logic so we sunk them aggressively. For example:
%a = load i32* %b %d = load i32* %b
%c = gep i32* %a, i32 0 %e = gep i32* %d, i32 1
Sinking %c and %e would naively require two PHI merges as %a != %d. But the loads are obviously equivalent (and maybe can't be hoisted because there is no common predecessor).
This is why we implemented the fairly complex function areValuesTriviallySame(), to look through trivial differences like this. However it's just not clever enough.
Instead, throw areValuesTriviallySame away, use pointer equality to check equivalence of operands and switch to a two-stage algorithm.
In the "scan" stage, we look at every sinkable instruction in isolation from end of block to front. If it's sinkable, we keep track of all operands that required PHI merging.
In the "sink" stage, we iteratively sink the last non-terminator in the source blocks. But when calculating how many PHIs are actually required to be inserted (to work out if we should stop or not) we remove any values that have already been sunk from the set of PHI-merges required, which allows us to be more aggressive.
This turns an algorithm with potentially recursive lookahead (looking through GEPs, casts, loads and any other instruction potentially not CSE'd) to two linear scans.
llvm-svn: 280351
We iterate over the result from SafeToMergeTerminators, so make it a SmallSetVector instead of a SmallPtrSet.
Should fix stage3 convergence builds.
llvm-svn: 280342
A very important case is not handled here: multiple arcs to a single block with a PHI. Consider:
a:
%1 = icmp %b, 1
br %1, label %c, label %e
c:
%2 = icmp %b, 2
br %2, label %d, label %e
d:
br %e
e:
phi [0, %a], [1, %c], [2, %d]
FoldValueComparisonIntoPredecessors will refuse to fold this, as it doesn't know how to deal with two arcs to a common destination with different PHI values. The answer is obvious - just split all conflicting arcs.
llvm-svn: 280338
We check that a sinking candidate is used by only one PHI node during our legality checks. However for instructions that are used by other sinking candidates our heuristic is less conservative. This can result in a candidate actually being illegal when we come to sink it because of how we sunk a predecessor. Do the used-by-only-one-PHI checks again during sinking to ensure we don't crash.
llvm-svn: 280228
We're sinking stores, which is a good thing, but in the process creating selects for the store address operand, which SROA/Mem2Reg can't look through, which caused serious regressions.
The real fix is in SROA, which I'll be looking into.
llvm-svn: 280219
A very important case is not handled here: multiple arcs to a single block with a PHI. Consider:
a:
%1 = icmp %b, 1
br %1, label %c, label %e
c:
%2 = icmp %b, 2
br %2, label %d, label %e
d:
br %e
e:
phi [0, %a], [1, %c], [2, %d]
FoldValueComparisonIntoPredecessors will refuse to fold this, as it doesn't know how to deal with two arcs to a common destination with different PHI values. The answer is obvious - just split all conflicting arcs.
llvm-svn: 280218
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280217
r279460 rewrote this function to be able to handle more than two incoming edges and took pains to ensure this didn't regress anything.
This time we change the logic for determining if an instruction should be sunk. Previously we used a single pass greedy algorithm - sink instructions until one requires more than one PHI node or we run out of instructions to sink.
This had the problem that sinking instructions that had non-identical but trivially the same operands needed extra logic so we sunk them aggressively. For example:
%a = load i32* %b %d = load i32* %b
%c = gep i32* %a, i32 0 %e = gep i32* %d, i32 1
Sinking %c and %e would naively require two PHI merges as %a != %d. But the loads are obviously equivalent (and maybe can't be hoisted because there is no common predecessor).
This is why we implemented the fairly complex function areValuesTriviallySame(), to look through trivial differences like this. However it's just not clever enough.
Instead, throw areValuesTriviallySame away, use pointer equality to check equivalence of operands and switch to a two-stage algorithm.
In the "scan" stage, we look at every sinkable instruction in isolation from end of block to front. If it's sinkable, we keep track of all operands that required PHI merging.
In the "sink" stage, we iteratively sink the last non-terminator in the source blocks. But when calculating how many PHIs are actually required to be inserted (to work out if we should stop or not) we remove any values that have already been sunk from the set of PHI-merges required, which allows us to be more aggressive.
This turns an algorithm with potentially recursive lookahead (looking through GEPs, casts, loads and any other instruction potentially not CSE'd) to two linear scans.
llvm-svn: 280216
This was deliberately disabled during my rewrite of SinkIfThenToEnd to keep behaviour
at least vaguely consistent with the previous version and keep it as close to NFC as
I could.
There's no real reason not to merge sideeffect calls though, so let's do it! Small fixup
along the way to ensure we don't create indirect calls.
Should fix PR28964.
llvm-svn: 280215
Summary: No functional changes, just refactoring to make D23947 simpler.
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23954
llvm-svn: 279982
We can't mark ORE (a function pass) preserved as required by the loop
passes because that is how we ensure that the required passes like
LazyBFI are all available any time ORE is used. See the new comments in
the patch.
Instead we use it directly just like the inliner does in D22694.
As expected there is some additional overhead after removing the caching
provided by analysis passes. The worst case, I measured was
LNT/CINT2006_ref/401.bzip2 which regresses by 12%. As before, this only
affects -Rpass-with-hotness and not default compilation.
llvm-svn: 279829
when unroll runtime iteration loop.
In llvm::UnrollRuntimeLoopRemainder, if the loop to be unrolled is the inner
loop inside a loop nest, the scalar evolution needs to be dropped for its
parent loop which is done by ScalarEvolution::forgetLoop. However, we can
postpone forgetLoop to the end of UnrollRuntimeLoopRemainder so TripCountSC
expansion can still reuse existing value.
Differential Revision: https://reviews.llvm.org/D23572
llvm-svn: 279748
Given that we're not currently using blocker info, and whether or not we
will end up using it it is unclear, don't waste 8 (or 4) bytes of memory
per path node.
llvm-svn: 279493
[Recommitting now an unrelated assertion in SROA is sorted out]
The new version has several advantages:
1) IMSHO it's more readable and neater
2) It handles loads and stores properly
3) It can handle any number of incoming blocks rather than just two. I'll be taking advantage of this in a followup patch.
With this change we can now finally sink load-modify-store idioms such as:
if (a)
return *b += 3;
else
return *b += 4;
=>
%z = load i32, i32* %y
%.sink = select i1 %a, i32 5, i32 7
%b = add i32 %z, %.sink
store i32 %b, i32* %y
ret i32 %b
When this works for switches it'll be even more powerful.
Round 4. This time we should handle all instructions correctly, and not replace any operands that need to be constant with variables.
This was really hard to determine safely, so the helper function should be put into the Instruction API. I'll do that as a followup.
llvm-svn: 279460
The new version has several advantages:
1) IMSHO it's more readable and neater
2) It handles loads and stores properly
3) It can handle any number of incoming blocks rather than just two. I'll be taking advantage of this in a followup patch.
With this change we can now finally sink load-modify-store idioms such as:
if (a)
return *b += 3;
else
return *b += 4;
=>
%z = load i32, i32* %y
%.sink = select i1 %a, i32 5, i32 7
%b = add i32 %z, %.sink
store i32 %b, i32* %y
ret i32 %b
When this works for switches it'll be even more powerful.
Round 4. This time we should handle all instructions correctly, and not replace any operands that need to be constant with variables.
This was really hard to determine safely, so the helper function should be put into the Instruction API. I'll do that as a followup.
llvm-svn: 279443
Summary:
We are going to combine poisoning of red zones and scope poisoning.
PR27453
Reviewers: kcc, eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23623
llvm-svn: 279373
CGSCC use a WeakVH to track call sites. RAUW a call within a function
can result in that WeakVH getting confused about whether or not the call
site is still around.
llvm-svn: 279268
The new version has several advantages:
1) IMSHO it's more readable and neater
2) It handles loads and stores properly
3) It can handle any number of incoming blocks rather than just two. I'll be taking advantage of this in a followup patch.
With this change we can now finally sink load-modify-store idioms such as:
if (a)
return *b += 3;
else
return *b += 4;
=>
%z = load i32, i32* %y
%.sink = select i1 %a, i32 5, i32 7
%b = add i32 %z, %.sink
store i32 %b, i32* %y
ret i32 %b
When this works for switches it'll be even more powerful.
llvm-svn: 279229
Summary:
We are going to combine poisoning of red zones and scope poisoning.
PR27453
Reviewers: kcc, eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23623
llvm-svn: 279020
minimal and boring form than the old pass manager's version.
This pass does the very minimal amount of work necessary to inline
functions declared as always-inline. It doesn't support a wide array of
things that the legacy pass manager did support, but is alse ... about
20 lines of code. So it has that going for it. Notably things this
doesn't support:
- Array alloca merging
- To support the above, bottom-up inlining with careful history
tracking and call graph updates
- DCE of the functions that become dead after this inlining.
- Inlining through call instructions with the always_inline attribute.
Instead, it focuses on inlining functions with that attribute.
The first I've omitted because I'm hoping to just turn it off for the
primary pass manager. If that doesn't pan out, I can add it here but it
will be reasonably expensive to do so.
The second should really be handled by running global-dce after the
inliner. I don't want to re-implement the non-trivial logic necessary to
do comdat-correct DCE of functions. This means the -O0 pipeline will
have to be at least 'always-inline,global-dce', but that seems
reasonable to me. If others are seriously worried about this I'd like to
hear about it and understand why. Again, this is all solveable by
factoring that logic into a utility and calling it here, but I'd like to
wait to do that until there is a clear reason why the existing
pass-based factoring won't work.
The final point is a serious one. I can fairly easily add support for
this, but it seems both costly and a confusing construct for the use
case of the always inliner running at -O0. This attribute can of course
still impact the normal inliner easily (although I find that
a questionable re-use of the same attribute). I've started a discussion
to sort out what semantics we want here and based on that can figure out
if it makes sense ta have this complexity at O0 or not.
One other advantage of this design is that it should be quite a bit
faster due to checking for whether the function is a viable candidate
for inlining exactly once per function instead of doing it for each call
site.
Anyways, hopefully a reasonable starting point for this pass.
Differential Revision: https://reviews.llvm.org/D23299
llvm-svn: 278896
When comparing a User* to a BasicBlock::iterator in
passingValueIsAlwaysUndefined, don't dereference the iterator in case it
is end().
llvm-svn: 278872
Clearing out the AssumptionCache can cause us to rescan the entire
function for assumes. If there are many loops, then we are scanning
over the entire function many times.
Instead of clearing out the AssumptionCache, register all cloned
assumes.
llvm-svn: 278854
This reverts commit r278660.
It causes downstream assertion failure in InstCombine on shuffle
instructions. Comes up in __mm_swizzle_epi32.
llvm-svn: 278672
The new version has several advantages:
1) IMSHO it's more readable and neater
2) It handles loads and stores properly
3) It can handle any number of incoming blocks rather than just two. I'll be taking advantage of this in a followup patch.
With this change we can now finally sink load-modify-store idioms such as:
if (a)
return *b += 3;
else
return *b += 4;
=>
%z = load i32, i32* %y
%.sink = select i1 %a, i32 5, i32 7
%b = add i32 %z, %.sink
store i32 %b, i32* %y
ret i32 %b
When this works for switches it'll be even more powerful.
llvm-svn: 278660
They aren't static, and moving them to the entry block across something
else will only result in tears.
Root cause of http://crbug.com/636558.
llvm-svn: 278571
Summary:
Port the NameAnonFunction pass and add a test.
Depends on D23439.
Reviewers: mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23440
llvm-svn: 278509
We are seeing r276077 drastically increasing compiler time for our larger
benchmarks in PGO profile generation build (both clang based and IR based
mode) -- it can be 20x slower than without the patch (like from 30 secs to
780 secs)
The increased time are all in pass LCSSA. The problematic code is about
PostProcessPHIs after use-rewrite. Note that the InsertedPhis from ssa_updater
is accumulating (never been cleared). Since the inserted PHIs are added to the
candidate for each rewrite, The earlier ones will be repeatedly added. Later
when adding the new PHIs to the work-list, we don't check the duplication
either. This can result in extremely long work-list that containing tons of
duplicated PHIs.
This patch fixes the issue by hoisting the code out of the loop.
Differential Revision: http://reviews.llvm.org/D23344
llvm-svn: 278250
Hal pointed out that the semantic of our intrinsic and the libc
call are slightly different. Add a comment while I'm here to
explain why we can't emit an intrinsic. Thanks Hal!
llvm-svn: 278200
Summary:
This hopefully fixes PR28825. The problem now was that a value from the
original loop was used in a subloop, which became a sibling after separation.
While a subloop doesn't need an lcssa phi node, a sibling does, and that's
where we broke LCSSA. The most natural way to fix this now is to simply call
formLCSSA on the original loop: it'll do what we've been doing before plus
it'll cover situations described above.
I think we don't need to run formLCSSARecursively here, and we have an assert
to verify this (I've tried testing it on LLVM testsuite + SPECs). I'd be happy
to be corrected here though.
I also changed a run line in the test from '-lcssa -loop-unroll' to
'-lcssa -loop-simplify -indvars', because it exercises LCSSA
preservation to the same extent, but also makes less unrelated
transformation on the CFG, which makes it easier to verify.
Reviewers: chandlerc, sanjoy, silvas
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23288
llvm-svn: 278173
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
llvm-svn: 278077
Summary:
Ensure that the MemorySSA object never changes address when using the
new pass manager since the walkers contained by MemorySSA cache pointers
to it at construction time. This is achieved by wrapping the
MemorySSAAnalysis result in a unique_ptr. Also add some asserts that
check for this bug.
Reviewers: george.burgess.iv, dberlin
Subscribers: mcrosier, hfinkel, chandlerc, silvas, llvm-commits
Differential Revision: https://reviews.llvm.org/D23171
llvm-svn: 278028
Summary:
In the use optimizer, we need to keep of whether the lower bound still
dominates us or else we may decide a lower bound is still valid when it
is not due to intervening pushes/pops. Fixes PR28880 (and probably a
bunch of other things).
Reviewers: george.burgess.iv
Subscribers: MatzeB, llvm-commits, sebpop
Differential Revision: https://reviews.llvm.org/D23237
llvm-svn: 277978
Summary:
The correctness fix here is that when we CSE a load with another load,
we need to combine the metadata on the two loads. This matches the
behavior of other passes, like instcombine and GVN.
There's also a minor optimization improvement here: for load PRE, the
aliasing metadata on the inserted load should be the same as the
metadata on the original load. Not sure why the old code was throwing
it away.
Issue found by inspection.
Differential Revision: http://reviews.llvm.org/D21460
llvm-svn: 277977
Summary:
Originally the plan was to use the custom worklist to do some block popping,
and because we don't actually need a visited set. The custom one we have
here is slightly broken, and it's not worth fixing vs using depth_first_iterator since we aren't going to go the route we originally
were.
Fixes PR28874
Reviewers: george.burgess.iv
Subscribers: llvm-commits, gberry
Differential Revision: https://reviews.llvm.org/D23187
llvm-svn: 277880
This fixes PR28825. The problem was that we only checked if a value from
a created inner loop is used in the outer loop, and fixed LCSSA for
them. But we missed to fixup LCSSA for values used in exits of the outer
loop.
llvm-svn: 277877
Summary: We do not care about intrinsic calls when assigning discriminators.
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23212
llvm-svn: 277843
This generated IR based on the order of evaluation, which is different
between GCC and Clang. With that in mind you get bootstrap miscompares
if you compare a Clang built with GCC-built Clang vs. Clang built with
Clang-built Clang. Diagnosing that made my head hurt.
This also reverts commit r277337, which "fixed" the test case.
llvm-svn: 277820
Not a correctness issue, but it would be nice if we didn't have to
recompute our block numbering (worst-case) every time we move MSSA.
llvm-svn: 277652
This reverts commit r277611 and the followup r277614.
Bootstrap builds and chromium builds are crashing during inlining after
this change.
llvm-svn: 277642
This is a follow-up to r277637. It teaches MemorySSA that invariant
loads (and loads of provably constant memory) are always liveOnEntry.
llvm-svn: 277640
This patch makes MemorySSA recognize atomic/volatile loads, and makes
MSSA treat said loads specially. This allows us to be a bit more
aggressive in some cases.
Administrative note: Revision was LGTM'ed by reames in person.
Additionally, this doesn't include the `invariant.load` recognition in
the differential revision, because I feel it's better to commit that
separately. Will commit soon.
Differential Revision: https://reviews.llvm.org/D16875
llvm-svn: 277637
It is possible for the value map to not have an entry for some value
that has already been removed.
I don't have a testcase, this is fall-out from a buildbot.
llvm-svn: 277614
We were able to figure out that the result of a call is some constant.
While propagating that fact, we added the constant to the value map.
This is problematic because it results in us losing the call site when
processing the value map.
This fixes PR28802.
llvm-svn: 277611
This fixes a bug where we'd sometimes cache overly-conservative results
with our walker. This bug was made more obvious by r277480, which makes
our cache far more spotty than it was. Test case is llvm-unit, because
we're likely going to use CachingWalker only for def optimization in the
future.
The bug stems from that there was a place where the walker assumed that
`DefNode.Last` was a valid target to cache to when failing to optimize
phis. This is sometimes incorrect if we have a cache hit. The fix is to
use the thing we *can* assume is a valid target to cache to. :)
llvm-svn: 277559
Summary: We really want to move towards MemoryLocOrCall (or fix AA) everywhere, but for now, this lets us have a single instructionClobbersQuery.
Reviewers: george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23072
llvm-svn: 277530
As agreed in post-commit review of r265388, I'm switching the flag to
its original value until the 90% runtime performance regression on
SingleSource/Benchmarks/Stanford/Bubblesort is addressed.
llvm-svn: 277524
Fixes PR28670
Summary:
Rewrite the use optimizer to be less memory intensive and 50% faster.
Fixes PR28670
The new use optimizer works like a standard SSA renaming pass, storing
all possible versions a MemorySSA use could get in a stack, and just
tracking indexes into the stack.
This uses much less memory than caching N^2 alias query results.
It's also a lot faster.
The current version defers phi node walking to the normal walker.
Reviewers: george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23032
llvm-svn: 277480
Added ability to estimate the entry count of the extracted function and
the branch probabilities of the exit branches.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22744
llvm-svn: 277411
Using RAUW was wrong here; if we have a switch transform such as:
18 -> 6 then
6 -> 0
If we use RAUW, while performing the second transform the *transformed* 6
from the first will be also replaced, so we end up with:
18 -> 0
6 -> 0
Found by clang stage2 bootstrap; testcase added.
llvm-svn: 277332
If a switch is sparse and all the cases (once sorted) are in arithmetic progression, we can extract the common factor out of the switch and create a dense switch. For example:
switch (i) {
case 5: ...
case 9: ...
case 13: ...
case 17: ...
}
can become:
if ( (i - 5) % 4 ) goto default;
switch ((i - 5) / 4) {
case 0: ...
case 1: ...
case 2: ...
case 3: ...
}
or even better:
switch ( ROTR(i - 5, 2) {
case 0: ...
case 1: ...
case 2: ...
case 3: ...
}
The division and remainder operations could be costly so we only do this if the factor is a power of two, and emit a right-rotate instead of a divide/remainder sequence. Dense switches can be lowered significantly better than sparse switches and can even be transformed into lookup tables.
llvm-svn: 277325
When extracting a set of blocks make sure to inherit all of the target
dependent attributes to make sure that the function will be valid for
lowering. One example is the "target-features" attribute for x86, if the
extracted region has functionality that relies on a specific feature it
will fail to be lowered.
This also allows for extracted functions to be valid for inlining, at
least back into the parent function, as the target attributes are tested
when inlining for compatibility.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22713
llvm-svn: 277315
Added ability to estimate the entry count of the extracted function and
the branch probabilities of the exit branches.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22744
llvm-svn: 277313
LoopUnroll is a loop pass, so the analysis of OptimizationRemarkEmitter
is added to the common function analysis passes that loop passes
depend on.
The BFI and indirectly BPI used in this pass is computed lazily so no
overhead should be observed unless -pass-remarks-with-hotness is used.
This is how the patch affects the O3 pipeline:
Dominator Tree Construction
Natural Loop Information
Canonicalize natural loops
Loop-Closed SSA Form Pass
Basic Alias Analysis (stateless AA impl)
Function Alias Analysis Results
Scalar Evolution Analysis
+ Lazy Branch Probability Analysis
+ Lazy Block Frequency Analysis
+ Optimization Remark Emitter
Loop Pass Manager
Rotate Loops
Loop Invariant Code Motion
Unswitch loops
Simplify the CFG
Dominator Tree Construction
Basic Alias Analysis (stateless AA impl)
Function Alias Analysis Results
Combine redundant instructions
Natural Loop Information
Canonicalize natural loops
Loop-Closed SSA Form Pass
Scalar Evolution Analysis
+ Lazy Branch Probability Analysis
+ Lazy Block Frequency Analysis
+ Optimization Remark Emitter
Loop Pass Manager
Induction Variable Simplification
Recognize loop idioms
Delete dead loops
Unroll loops
...
llvm-svn: 277203
Patch by Sunita Marathe
Third try, now following fixes to MSan to handle mempcy in such a way that this commit won't break the MSan buildbots. (Thanks, Evegenii!)
llvm-svn: 277189
A ConstantVector can have ConstantExpr operands and vice versa.
However, the folder had no ability to fold ConstantVectors which, in
some cases, was an optimization barrier.
Instead, rephrase the folder in terms of Constants instead of
ConstantExprs and teach callers how to deal with failure.
llvm-svn: 277099
Summary:
copypasta doc of ImportedFunctionsInliningStatistics class
\brief Calculate and dump ThinLTO specific inliner stats.
The main statistics are:
(1) Number of inlined imported functions,
(2) Number of imported functions inlined into importing module (indirect),
(3) Number of non imported functions inlined into importing module
(indirect).
The difference between first and the second is that first stat counts
all performed inlines on imported functions, but the second one only the
functions that have been eventually inlined to a function in the importing
module (by a chain of inlines). Because llvm uses bottom-up inliner, it is
possible to e.g. import function `A`, `B` and then inline `B` to `A`,
and after this `A` might be too big to be inlined into some other function
that calls it. It calculates this statistic by building graph, where
the nodes are functions, and edges are performed inlines and then by marking
the edges starting from not imported function.
If `Verbose` is set to true, then it also dumps statistics
per each inlined function, sorted by the greatest inlines count like
- number of performed inlines
- number of performed inlines to importing module
Reviewers: eraman, tejohnson, mehdi_amini
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D22491
llvm-svn: 277089
Sanitizers set nobuiltin attribute on certain library functions to
avoid a situation where such function is neither instrumented nor
intercepted.
At the moment the list of interesting functions is hardcoded. This
change replaces it with logic based on
TargetLibraryInfo::hasOptimizedCodegen and the presense of readnone
function attribute (sanitizers are generally interested in memory
behavior of library functions).
This is expected to be a no-op change: the new logic matches exactly
the same set of functions.
r276771 (currently reverted) added mempcpy() to the list, breaking
MSan tests. With this change, r276771 can be safely re-landed.
llvm-svn: 277086
Summary:
LCSSAWrapperPass currently doesn't override verifyAnalysis method, so pass
manager doesn't verify LCSSA. This patch adds the method so that we start
verifying LCSSA between loop passes.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22888
llvm-svn: 276941
This lets you actually check to see if a block is valid before trying to
extract.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22699
llvm-svn: 276846
There didn't appear to be a good reason to use iplist in this case, a regular
list of unique_ptr works just as well.
Change made in preparation to a new PM port (since iplist is not moveable).
llvm-svn: 276668
Allowed loop vectorization with secondary FP IVs. Like this:
float *A;
float x = init;
for (int i=0; i < N; ++i) {
A[i] = x;
x -= fp_inc;
}
The auto-vectorization is possible when the induction binary operator is "fast" or the function has "unsafe" attribute.
Differential Revision: https://reviews.llvm.org/D21330
llvm-svn: 276554
checkClobberSanity will now be run for all results of `ClobberWalk`,
instead of just the crazy phi-optimized ones. This can help us catch
cases where our cache is being wonky.
llvm-svn: 276553
This unblocks the new PM part of River's patch in
https://reviews.llvm.org/D22706
Conveniently, this same change was needed for D21921 and so these
changes are just spun out from there.
llvm-svn: 276515
A seemingly common use for the walker's getClobberingMemoryAccess
function is:
```
MemoryAccess *getClobber(MemorySSAWalker *W, MemoryUseOrDef *MUD) {
const Instruction *I = MUD->getMemoryInst();
return W->getClobberingMemoryAccess(I);
}
```
Which is kind of redundant, since walkers will ultimately query MSSA to
find out which MemoryAccess `I` maps to (...which is always `MUD`).
So, this patch adds an overload of getClobberingMemoryAccess that
accepts MemoryAccesses directly. As a result, the Instruction overload
of getClobberingMemoryAccess becomes a lightweight wrapper around our
new overload.
Additionally, this patch un`virtual`izes the Instruction overload of
getClobberingMemoryAccess, since there doesn't seem to be a walker that
benefits from that being virtual, and I can't think of how else one
would implement it. Happy to make it virtual again if we would benefit
from doing so.
llvm-svn: 276169
As noted in https://reviews.llvm.org/D22537 , we can use this functionality in
visitSelectInstWithICmp() and InstSimplify, but currently we have duplicated
code.
llvm-svn: 276140
Revert "[LoopSimplify] Update LCSSA after separating nested loops."
This reverts commit r275891.
Revert "[LCSSA] Post-process PHI-nodes created by SSAUpdate when constructing LCSSA form."
This reverts commit r275883.
llvm-svn: 276064
This patch updates MemorySSA's use-optimizing walker to be more
accurate and, in some cases, faster.
Essentially, this changed our core walking algorithm from a
cache-as-you-go DFS to an iteratively expanded DFS, with all of the
caching happening at the end. Said expansion happens when we hit a Phi,
P; we'll try to do the smallest amount of work possible to see if
optimizing above that Phi is legal in the first place. If so, we'll
expand the search to see if we can optimize to the next phi, etc.
An iteratively expanded DFS lets us potentially quit earlier (because we
don't assume that we can optimize above all phis) than our old walker.
Additionally, because we don't cache as we go, we can now optimize above
loops.
As an added bonus, this patch adds a ton of verification (if
EXPENSIVE_CHECKS are enabled), so finding bugs is easier.
Differential Revision: https://reviews.llvm.org/D21777
llvm-svn: 275940
Summary:
Usually LCSSA survives this transformation, but in some cases (see
attached test) it doesn't: values from the original loop after
separating might be used from the outer loop. Before the transformation
it was the same loop, so LCSSA phis were not required.
This fixes PR28272.
Reviewers: sanjoy, hfinkel, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21665
llvm-svn: 275891
Summary:
When a pass tries to keep LCSSA form it's often convenient to be able to update
LCSSA for a set of instructions rather than for the entire loop. This patch makes the
processInstruction from LCSSA externally available under a name
formLCSSAForInstruction.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22378
llvm-svn: 275613
Calling getModRefInfo with a fence resulted in crashes because fences
don't have a memory location. Add a new predicate to Instruction
called isFenceLike which indicates that the instruction mutates memory
but not any single memory location in particular. In practice, it is a
proxy for the set of instructions which "mayWriteToMemory" but cannot be
used with MemoryLocation::get.
This fixes PR28570.
llvm-svn: 275581
While here move simplifyLoop() function to the new header, as
suggested by Chandler in the review.
Differential Revision: http://reviews.llvm.org/D21404
llvm-svn: 274959
Akira Hatanaka