The scalar VFMS instructions did not have scheduling information attached (but
VFMA did), which was causing assertion failures with the Cortex-A57 scheduling
model and -fp-contract=fast.
Differential Revision: https://reviews.llvm.org/D34040
llvm-svn: 305064
Initial implementation - needs similar work/testing for other tools
bugpoint invokes (llc, lli I think, maybe more).
Alternatively (as suggested by chandlerc@) an environment variable could
be used. This would allow the option to pass transparently through user
scripts, pass to compilers if they happened to be LLVM-ish, etc.
I worry a bit about using cl::opt in the crash handling code - LLVM
might crash early, perhaps before the cl::opt is properly initialized?
Or at least before arguments have been parsed?
- should be OK since it defaults to "pretty", so if the crash is very
early in opt parsing, etc, then crash reports will still be symbolized.
I shyed away from doing this with an environment variable when I
realized that would require copying the existing environment and
appending the env variable of interest. But it seems there's no existing
LLVM API for accessing the environment (even the Support tests for
process launching have their own ifdefs for getting the environment). It
could be added, but seemed like a higher bar/untested codepath to
actually add environment variables.
Most importantly, this reduces the runtime of test/BugPoint/metadata.ll
in a split-dwarf Debug build from 1m34s to 6.5s by avoiding a lot of
symbolication. (this wasn't a problem for non-split-dwarf builds only
because the executable was too large to map into memory (due to bugpoint
setting a 400MB memory (including address space - not sure why? Going to
remove that) limit on the child process) so symbolication would fail
fast & wouldn't spend all that time parsing DWARF, etc)
Reviewers: chandlerc, dannyb
Differential Revision: https://reviews.llvm.org/D33804
llvm-svn: 305056
This change adds an option disable-lftr to be able to disable Linear Function Test Replace optimization.
By default option is off so current behavior is not changed.
Reviewers: reames, sanjoy, wmi, andreadb, apilipenko
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33979
llvm-svn: 305055
If we're shrinking a binary operation, it may be the case that the new
operations wraps where the old didn't. If this happens, the behavior
should be well-defined. So, we can't always carry wrapping flags with us
when we shrink operations.
If we do, we get incorrect optimizations in cases like:
void foo(const unsigned char *from, unsigned char *to, int n) {
for (int i = 0; i < n; i++)
to[i] = from[i] - 128;
}
which gets optimized to:
void foo(const unsigned char *from, unsigned char *to, int n) {
for (int i = 0; i < n; i++)
to[i] = from[i] | 128;
}
Because:
- InstCombine turned `sub i32 %from.i, 128` into
`add nuw nsw i32 %from.i, 128`.
- LoopVectorize vectorized the add to be `add nuw nsw <16 x i8>` with a
vector full of `i8 128`s
- InstCombine took advantage of the fact that the newly-shrunken add
"couldn't wrap", and changed the `add` to an `or`.
InstCombine seems happy to figure out whether we can add nuw/nsw on its
own, so I just decided to drop the flags. There are already a number of
places in LoopVectorize where we rely on InstCombine to clean up.
llvm-svn: 305053
Other comments/implications are that this isn't intended behavior (nor
perserved/reimplemented in the new inliner) & complicates fixing the
'inlining' of trivially dead calls without consulting the cost function
first.
llvm-svn: 305052
Summary:
RelocOffset is a 32-bit value, but we previously truncated it to 16 bits.
Fixes PR33335.
Reviewers: zturner, hiraditya!
Reviewed By: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33968
llvm-svn: 305043
This adds support for Symbols, StringTable, and FrameData subsection
types. Even though these subsections rarely if ever appear in a PDB
file (they are usually in object files), there's no theoretical reason
why they *couldn't* appear in a PDB. The real issue though is that in
order to add support for dumping and writing them (which will be useful
for object files), we need a way to test them. And since there is no
support for reading and writing them to / from object files yet, making
PDB support them is the best way to both add support for the underlying
format and add support for tests at the same time. Later, when we go
to add support for reading / writing them from object files, we'll need
only minimal changes in the underlying read/write code.
llvm-svn: 305037
This is the same change for the YAML Output style applied to the
raw output style. Previously we would queue up all subsections
until every one had been read, and then output them in a pre-
determined order. This was because some subsections need to be
read first in order to properly dump later subsections. This
patch allows them to be dumped in the order they appear.
Differential Revision: https://reviews.llvm.org/D34015
llvm-svn: 305034
The pdb2yaml and raw subcommands did something very
similar but with a different output format, and they
used a lot of the same command line options, but each
one re-implemented the command line option with slightly
different spellings / options. This patch merges them
together into a single definition which is shared by
both subcommands. This new syntax also allows for more
flexibility in the way debug subsections are dumped.
Differential Revision: https://reviews.llvm.org/D33996
llvm-svn: 305032
Since D17854 LinkerSubsectionsViaSymbols is unnecessary.
It is interfering with ThinLTO implementation of CFI-ICall, where
the aliases used on the !LinkerSubsectionsViaSymbols branch are
needed to export jump tables to ThinLTO backends.
This is the second attempt to land this change after fixing PR33316.
llvm-svn: 305031
This is to prepare to allow for dead stripping of globals in the
merged modules.
Differential Revision: https://reviews.llvm.org/D33921
llvm-svn: 305027
(0) RegAllocPBQP: Since getRawAllocationOrder() may return a collection that includes reserved physical registers, iterate to find an un-reserved physical register.
(1) VirtRegMap: Enforce the invariant: "no reserved physical registers" in assignVirt2Phys(). Previously, this was checked only after the fact in VirtRegRewriter::rewrite.
(2) MachineVerifier: updated the test per MatzeB's review.
(3) +testcase
Patch by Nick Johnson<Nicholas.Paul.Johnson@deshawresearch.com>!
Differential Revision: https://reviews.llvm.org/D33947
llvm-svn: 305016
No IR tests were added with rL304313 ( https://reviews.llvm.org/D28637 ),
so I want these for extra coverage if we enable memcmp expansion for x86.
As shown, nothing is expanded for x86 in CGP yet.
Also fundamentally, we're doing an IR transform, so we should have IR tests
for just that part. If something goes wrong, we need to know if the bug is
in CGP or later lowering.
llvm-svn: 305011
Summary: Early-inlining of recursive call makes the code size bloat exponentially. We should not disable it.
Reviewers: davidxl, dnovillo, iteratee
Reviewed By: iteratee
Subscribers: iteratee, llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D34017
llvm-svn: 305009
In PPCBoolRetToInt bool value is changed to i32 type. On ppc64 it may introduce an extra zero extension for the return value. This patch changes the integer type to i64 to avoid the zero extension on ppc64.
This patch fixed PR32442.
Differential Revision: https://reviews.llvm.org/D31407
llvm-svn: 305001
The V_MQSAD_PK_U16_U8, V_QSAD_PK_U16_U8, and V_MQSAD_U32_U8 take more than 1 pass in hardware. For these three instructions, the destination registers must be different than all sources, so that the first pass does not overwrite sources for the following passes.
Differential Revision: https://reviews.llvm.org/D33783
llvm-svn: 304998
In SDAG, we don't expand libcalls with a nobuiltin attribute.
It's not clear if that's correct from the existing code comment:
"Don't do the check if marked as nobuiltin for some reason."
...adding a test here either way to show that there is currently
a different behavior implemented in the CGP-based expansion.
llvm-svn: 304991
The test diff for PowerPC shows we can better optimize if this case is one block.
For x86, there's would be a substantial difference if CGP expansion was enabled because branches are assumed
cheap and SDAG can't optimize across blocks.
Instead of this:
_cmp_eq8:
movq (%rdi), %rax
cmpq (%rsi), %rax
je LBB23_1
## BB#2: ## %res_block
movl $1, %ecx
jmp LBB23_3
LBB23_1:
xorl %ecx, %ecx
LBB23_3: ## %endblock
xorl %eax, %eax
testl %ecx, %ecx
sete %al
retq
We get this:
cmp_eq8:
movq (%rdi), %rcx
xorl %eax, %eax
cmpq (%rsi), %rcx
sete %al
retq
And that matches the optimal codegen that we get from the current expansion in SelectionDAGBuilder::visitMemCmpCall().
If this looks right, then I just need to confirm that vector-sized expansion will work from here, and we can enable
CGP memcmp() expansion for x86. Ie, we'll bypass the power-of-2 special cases currently optimized in SDAG because we
can lower the IR produced here optimally.
Differential Revision: https://reviews.llvm.org/D34005
llvm-svn: 304987
Add a couple of tests to increase coverage for the TableGen'erated code,
in particular for rules where 2 generic instructions may be combined
into a single machine instruction.
llvm-svn: 304971
The zero heuristic assumes that integers are more likely positive than negative,
but this also has the effect of assuming that strcmp return values are more
likely positive than negative. Given that for nonzero strcmp return values it's
the ordering of arguments that determines the sign of the result there's no
reason to assume that's true.
Fix this by inspecting the LHS of the compare and using TargetLibraryInfo to
decide if it's strcmp-like, and if so only assume that nonzero is more likely
than zero i.e. strings are more often different than the same. This causes a
slight code generation change in the spec2006 benchmark 403.gcc, but with no
noticeable performance impact. The intent of this patch is to allow better
optimisation of dhrystone on Cortex-M cpus, but currently it won't as there are
also some changes that need to be made to if-conversion.
Differential Revision: https://reviews.llvm.org/D33934
llvm-svn: 304970
This was discussed in D33338. We have larger pattern-matching ending in a truncate that
we can reduce or remove by handling these smaller patterns first. Further motivation is
that narrower shift ops are easier for value tracking and zext is better than sext.
http://rise4fun.com/Alive/rhh
Name: boolshift
%sext = sext i1 %x to i8
%r = lshr i8 %sext, 7
=>
%r = zext i1 %x to i8
Name: noboolshift
%sext = sext i3 %x to i8
%r = lshr i8 %sext, 7
=>
%sh = lshr i3 %x, 2
%r = zext i3 %sh to i8
Differential Revision: https://reviews.llvm.org/D33879
llvm-svn: 304939
This could be viewed as another shortcoming of the DAGCombiner:
when both operands of a compare are zexted from the same source
type, we should be able to compare the original types.
The effect on PowerPC perf is likely unnoticeable, but there's a
visible regression for x86 if we feed the suboptimal IR for memcmp
expansion to the DAG:
_cmp_eq4_zexted_to_i64:
movl (%rdi), %ecx
movl (%rsi), %edx
xorl %eax, %eax
cmpq %rdx, %rcx
sete %al
_cmp_eq4_better:
movl (%rdi), %ecx
xorl %eax, %eax
cmpl (%rsi), %ecx
sete %al
llvm-svn: 304923
This makes it so that the code quality for CFI checks when compiling
with -O2 and linking with --lto-O0 is similar to that of the rest of
the code.
Reduces the size of a chrome binary built with -O2/--lto-O0 by
about 750KB.
Differential Revision: https://reviews.llvm.org/D33925
llvm-svn: 304921
Changed immediate type for repl.ph from uimm10 to simm10 as per the specs.
Repl.qb still accepts uimm8. Both instructions now mimic the behaviour of
GNU as.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33594
llvm-svn: 304918
If we know that both operands of an unsigned integer vector comparison are non-negative,
then it's safe to directly use a signed-compare-greater-than instruction (the only non-equality
integer vector compare predicate provided by SSE/AVX).
We're intentionally not changing the condition code to signed in order to preserve the
existing transforms that use min/max/psubus below here.
This should solve PR33276:
https://bugs.llvm.org/show_bug.cgi?id=33276
Differential Revision: https://reviews.llvm.org/D33862
llvm-svn: 304909
The clang compiler by default uses FastISel when invoked with -O0, which
is also the default. In that case, passing of -mxgot does not get honored,
i.e. the code path that is to deal with large got is not taken.
Clang produces same output regardless of -mxgot being present or not.
This change checks whether -mxgot is passed as an option, and turns off
FastISel if it is.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33593
llvm-svn: 304906
According to the commit message from r296921, G_MERGE_VALUES and
G_INSERT are to be preferred over G_SEQUENCE. Therefore, stop generating
G_SEQUENCE in the ARM backend and remove the code dealing with it.
This boils down to the code breaking up double values for the soft float
calling convention. Use G_MERGE_VALUES + G_UNMERGE_VALUES instead of
G_SEQUENCE + G_EXTRACT for it. This maps very nicely to VMOVDRR +
VMOVRRD and simplifies the code in the instruction selector.
There's one occurence of G_SEQUENCE left in arm-irtranslator.ll, but
that is part of the target-independent code for translating constant
structs. Therefore, it is beyond the scope of this commit.
llvm-svn: 304902
If there's enough data in fron of it the skipped region would just
become arbitrarily large, and we scan for the CHECK-NOT everywhere.
llvm-svn: 304900
This is identical to the support for the other binary operators:
- widen to s32
- map into GPR
- select ANDrr (via TableGen'erated code)
llvm-svn: 304885
Summary:
This patch updates Triple::isCompatibleWith to make armxx and thumbxx
triples compatible, as long as the subarch, vendor, os, envorionment and
object format match. Thumb/ARM code generation should be controlled
using the thumb-mode per-function target feature rather than by the
triple to allow mixing Thumb and ARM functions.
D33448 updates Clang's codegen to add thumb-mode for all functions with
armxx or thumbxx triples.
Reviewers: echristo, t.p.northover, rafael, kristof.beyls, rengolin, tejohnson
Reviewed By: tejohnson
Subscribers: rinon, eugenis, pcc, srhines, aemerson, mehdi_amini, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33287
llvm-svn: 304884
Summary:
Relocations are required for unconditional branches to function symbols with
different execution mode. Without this patch, incorrect branches are
generated for tail calls between functions with different execution
mode.
Reviewers: peter.smith, rafael, echristo, kristof.beyls
Reviewed By: peter.smith
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33898
llvm-svn: 304882
A few tests in llvm/test/Transforms/Util/PredicateInfo/ are using -reverse-iterate.
The option -reverse-iterate is enabled with +Asserts in usual cases, but it can be turned on/off regardless of LLVM_ENABLE_ASSERTIONS.
I wonder if this were incompatible to https://reviews.llvm.org/D33908 (r304757).
Differential Revision: https://reviews.llvm.org/D33854
llvm-svn: 304851
I'd like to enable CGP memcmp expansion for x86, but the output from CGP would regress the
special cases (memcmp(x,y,N) != 0 for N=1,2,4,8,16,32 bytes) that we already handle.
I'm not sure if we'll actually be able to produce the optimal code given the block-at-a-time
limitation in the DAG. We might have to just avoid those special-cases here in CGP. But
regardless of that, I think this is a win for the more general cases.
http://rise4fun.com/Alive/cbQ
Differential Revision: https://reviews.llvm.org/D33963
llvm-svn: 304849
This patch introduces a new command line option, called brief, to
llvm-dwarfdump. When -brief is used, the attribute forms for the
.debug_info section will not be emitted to output.
Patch by Spyridoula Gravani!
rdar://problem/21474365
Differential Revision: https://reviews.llvm.org/D33867
llvm-svn: 304844
3 of the tests were testing exactly the same thing: memcmp(x, y, 16) != 0.
I changed that to test 4, 7, and 16 bytes, so we can see how those differ.
llvm-svn: 304838
- Add -x <language> option to switch between IR and MIR inputs.
- Change MIR parser to read from stdin when filename is '-'.
- Add a simple mir roundtrip test.
llvm-svn: 304825
Summary:
The patch makes instruction count the highest priority for
LSR solution for X86 (previously registers had highest priority).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D30562
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 304824
Summary:
LVIPrinter pass was previously relying on the LVICache. We now directly call the
the LVI functions which solves the value if the LVI information is not already
available in the cache. This has 2 benefits over the printing of LVI cache:
1. higher coverage (i.e. catches errors) in LVI code when cache value is
invalidated.
2. relies on the core functions, and not dependent on the LVI cache (which may
be scrapped at some point).
It would still catch any cache invalidation errors, since we first go through
the cache.
Reviewers: reames, dberlin, sanjoy
Reviewed by: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32135
llvm-svn: 304819
The change cleans up and unifies the handling of relocation
entries in WasmObjectWriter. Type index relocation no longer
need to be handled separately.
The only externally visible change should be that type
index relocations are no longer grouped at the end.
Differential Revision: https://reviews.llvm.org/D33918
llvm-svn: 304816
CodeGen uses MO_ExternalSymbol to represent the inline assembly strings.
Empty strings for symbol names appear to be invalid. For now just
special case the output code to avoid hitting an `assert()` in
`printLLVMNameWithoutPrefix()`.
This fixes https://llvm.org/PR33317
llvm-svn: 304815
Patch https://reviews.llvm.org/rL304806 was causing failures in Aarch64
and multiple other targets since the test should be run on X86 only.
Specifying the target triple is not enough. Moving the testcase to the
X86 target directory in LoopIdiom.
llvm-svn: 304809
1. When there is no perfect iteration order, we can't let phi nodes
put themselves in terms of things that come later in the iteration
order, or we will endlessly cycle (the normal RPO algorithm clears the
hashtable to avoid this issue).
2. We are sometimes erasing the wrong expression (causing pessimism)
because our equality says loads and stores are the same.
We introduce an exact equality function and use it when erasing to
make sure we erase only identical expressions, not equivalent ones.
llvm-svn: 304807
Summary:
Expanding the loop idiom test for memcpy to also recognize
unordered atomic memcpy. The only difference for recognizing
an unordered atomic memcpy and instead of a normal memcpy is
that the loads and/or stores involved are unordered atomic operations.
Background: http://lists.llvm.org/pipermail/llvm-dev/2017-May/112779.html
Patch by Daniel Neilson!
Reviewers: reames, anna, skatkov
Reviewed By: reames, anna
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33243
llvm-svn: 304806
Addition of a feature and a predicate used to control generation of madd.fmt
and similar instructions.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33400
llvm-svn: 304801
Summary:
We were canonizalizing the pre loop (into loop-simplify form) before
the post loop blocks were added into parent loop. This is incorrect when IRCE is
done on a subloop. The post-loop blocks are created, but not yet added to the
parent loop. So, loop-simplification on the pre-loop incorrectly updates
LoopInfo.
This patch corrects the ordering so that pre and post loop blocks are added to
parent loop (if any), and then the loops are canonicalized to LCSSA and
LoopSimplifyForm.
Reviewers: reames, sanjoy, apilipenko
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33846
llvm-svn: 304800
If -simplify-mir option is passed then MIRPrinter will not print such fields.
This change also required some lit test cases in CodeGen directory to be changed.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D32304
llvm-svn: 304779
This is a negative test as pextrw doesn't write to all 32-bits of the
spilled GPR. This fold ended up happening when D32684 was landed and
covers the regression that motivated reverting it in r304762.
llvm-svn: 304763
In testing, we've found yet another miscompile caused by the new tables.
And this one is even less clear how to fix (we could teach it to fold
a 16-bit load instead of the 32-bit load it wants, or block folding
entirely).
Also, the approach to excluding instructions seems increasingly to not
scale well.
I have left a more detailed analysis on the review log for the original
patch (https://reviews.llvm.org/D32684) along with suggested path
forward. I will land an additional test case that I wrote which covers
the code that was miscompiling (folding into the output of `pextrw`) in
a subsequent commit to keep this a pure revert.
For each commit reverted here, I've restricted the revert to the
non-test code touching the x86 fold table emission until the last commit
where I did revert the test updates. This means the *new* test cases
added for `insertps` and `xchg` remain untouched (and continue to pass).
Reverted commits:
r304540: [X86] Don't fold into memory operands into insertps in the ...
r304347: [TableGen] Adapt more places to getValueAsString now ...
r304163: [X86] Don't fold away the memory operand of an xchg.
r304123: Don't capture a temporary std::string in a StringRef.
r304122: Resubmit "[X86] Adding new LLVM TableGen backend that ..."
Original commit was in r304088, and after a string of fixes was reverted
previously in r304121 to fix build bots, and then re-landed in r304122.
llvm-svn: 304762
When parsing .mir files immediately construct the MachineFunctions and
put them into MachineModuleInfo.
This allows us to get rid of the delayed construction (and delayed error
reporting) through the MachineFunctionInitialzier interface.
Differential Revision: https://reviews.llvm.org/D33809
llvm-svn: 304758
- Move ISel (and pre-isel) pass construction into TargetPassConfig
- Extract AsmPrinter construction into a helper function
Putting the ISel code into TargetPassConfig seems a lot more natural and
both changes together make make it easier to build custom pipelines
involving .mir in an upcoming commit. This moves MachineModuleInfo to an
earlier place in the pass pipeline which shouldn't have any effect.
llvm-svn: 304754
There's nothing darwin-specific in these tests, and using that
setting causes extra phantom diffs when the auto-generated check
lines are regenerated today.
llvm-svn: 304753
Althought it is not wrong to spill undef values, it is useless and harms
both code size and runtime. Before spilling a value, check that its
content actually matters.
http://www.llvm.org/PR33311
llvm-svn: 304752
If a tied source operand was undef, it would be replaced but not
update the other tied operand, which would end up using different
virtual registers.
llvm-svn: 304747
Running `llc -verify-dom-info` on the attached testcase results in a
crash in the verifier, due to a stale dominator tree.
i.e.
DominatorTree is not up to date!
Computed:
=============================--------------------------------
Inorder Dominator Tree:
[1] %safe_mod_func_uint8_t_u_u.exit.i.i.i {0,7}
[2] %lor.lhs.false.i61.i.i.i {1,2}
[2] %safe_mod_func_int8_t_s_s.exit.i.i.i {3,6}
[3] %safe_div_func_int64_t_s_s.exit66.i.i.i {4,5}
Actual:
=============================--------------------------------
Inorder Dominator Tree:
[1] %safe_mod_func_uint8_t_u_u.exit.i.i.i {0,9}
[2] %lor.lhs.false.i61.i.i.i {1,2}
[2] %safe_mod_func_int8_t_s_s.exit.i.i.i {3,8}
[3] %safe_div_func_int64_t_s_s.exit66.i.i.i {4,5}
[3] %safe_mod_func_int8_t_s_s.exit.i.i.i.lor.lhs.false.i61.i.i.i_crit_edge {6,7}
This is because in `SelectionDAGIsel` we split critical edges without
updating the corresponding dominator for the function (and we claim
in `MachineFunctionPass::getAnalysisUsage()` that the domtree is preserved).
We could either stop preserving the domtree in `getAnalysisUsage`
or tell `splitCriticalEdge()` to update it.
As the second option is easy to implement, that's the one I chose.
Differential Revision: https://reviews.llvm.org/D33800
llvm-svn: 304742
While it's not entirely clear why a compiler or linker might
put this information into an object or PDB file, one has been
spotted in the wild which was causing llvm-pdbdump to crash.
This patch adds support for reading-writing these sections.
Since I don't know how to get one of the native tools to
generate this kind of debug info, the only test here is one
in which we feed YAML into the tool to produce a PDB and
then spit out YAML from the resulting PDB and make sure that
it matches.
llvm-svn: 304738
This ensures that we can emit the ObjC Image Info structure on COFF and
ELF as well. The frontend already would attempt to emit this
information but would get dropped when generating assembly or an object
file.
llvm-svn: 304736
procedural optimizations to prevent dropping symbols and allow the linker
to process re-directs.
PR33145: --wrap doesn't work with lto.
Differential Revision: https://reviews.llvm.org/D33621
llvm-svn: 304719
When lowering calls, we generate instructions with machine opcodes
rather than generic ones. Therefore, we need to constrain the register
classes of the operands.
Also enable the machine verifier on the arm-irtranslator.ll test, since
that would've caught this issue.
Fixes (part of) PR32146.
llvm-svn: 304712
The C functions added are LLVMGetNumContainedTypes and
LLVMGetSubtypes.
The OCaml function added is Llvm.subtypes.
Patch by Ekaterina Vaartis.
Differential Revision: https://reviews.llvm.org/D33677
llvm-svn: 304709
This patch provides a means to specify section-names for global variables,
functions and static variables, using #pragma directives.
This feature is only defined to work sensibly for ELF targets.
One can specify section names as:
#pragma clang section bss="myBSS" data="myData" rodata="myRodata" text="myText"
One can "unspecify" a section name with empty string e.g.
#pragma clang section bss="" data="" text="" rodata=""
Reviewers: Roger Ferrer, Jonathan Roelofs, Reid Kleckner
Differential Revision: https://reviews.llvm.org/D33413
llvm-svn: 304704
This change adds a new fixup fixup_t2_so_imm for the t2_so_imm_asmoperand
"T2SOImm". The fixup permits code such as:
.L1:
sub r3, r3, #.L2 - .L1
.L2:
to assemble in Thumb2 as well as in ARM state.
The operand predicate isT2SOImm() explicitly doesn't match expressions
containing :upper16: and :lower16: as expressions with these operators
must match the movt and movw instructions.
The test mov r0, foo2 in thumb2-diagnostics is moved to a new file as the
fixup delays the error message till after the assembler has quit due to
the other errors.
As the mov instruction shares the t2_so_imm_asmoperand mov instructions
with a non constant expression now match t2MOVi rather than t2MOVi16 so the
error message is slightly different.
Fixes PR28647
Differential Revision: https://reviews.llvm.org/D33492
llvm-svn: 304702
This fixes a bug that can cause extractelements with operands that
haven't been defined yet to be inserted at a wrong point when
optimising insertelements.
Patch by Karl Hylen.
Differential Revision: https://reviews.llvm.org/D33449
llvm-svn: 304701
Fixes bug #33302. Pass did not account that Src1 of max instruction
can be an immediate.
Differential Revision: https://reviews.llvm.org/D33884
llvm-svn: 304696
We currently generate BUILD_VECTOR as a tree of UNPCKL shuffles of the same type:
e.g. for v4f32:
Step 1: unpcklps 0, 2 ==> X: <?, ?, 2, 0>
: unpcklps 1, 3 ==> Y: <?, ?, 3, 1>
Step 2: unpcklps X, Y ==> <3, 2, 1, 0>
The issue is because we are not placing sequential vector elements together early enough, we fail to recognise many combinable patterns - consecutive scalar loads, extractions etc.
Instead, this patch unpacks progressively larger sequential vector elements together:
e.g. for v4f32:
Step 1: unpcklps 0, 2 ==> X: <?, ?, 1, 0>
: unpcklps 1, 3 ==> Y: <?, ?, 3, 2>
Step 2: unpcklpd X, Y ==> <3, 2, 1, 0>
This does mean that we are creating UNPCKL shuffle of different value types, but the relevant combines that benefit from this are quite capable of handling the additional BITCASTs that are now included in the shuffle tree.
Differential Revision: https://reviews.llvm.org/D33864
llvm-svn: 304688
Remove dependency of SDWA pass on SIShrinkInstructions.
The goal is to move SDWA even higher in the stack to avoid second run
of MachineLICM, MachineCSE and SIFoldOperands.
Also added handling to preserve original src modifiers.
Differential Revision: https://reviews.llvm.org/D33860
llvm-svn: 304665
Summary:
These are mostly legal, but will probably need special lowering for some
cases.
Reviewers: arsenm
Reviewed By: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, rovka, kristof.beyls, igorb, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D33791
llvm-svn: 304628
SIFoldOperands can commute operands even if no folding was done.
This change is to preserve IR is no folding was done.
Differential Revision: https://reviews.llvm.org/D33802
llvm-svn: 304625
There's nothing darwin-specific in these tests, and using
that setting causes extra phantom diffs when the auto-generated
check lines are regenerated today.
llvm-svn: 304614
This pass allows to run the register scavenging independently of
PrologEpilogInserter to allow targeted testing.
Also adds some basic register scavenging tests.
llvm-svn: 304606
Prior to this patch we used to not touch the LiveRegMatrix while doing
live-range splitting. In other words, when live-range splitting was
occurring, the LiveRegMatrix was not reflecting the changes.
This is generally fine because it means the query to the LiveRegMatrix
will be conservately correct. However, when decisions are taken based on
what is going to happen on the interferences (e.g., when we spill a
register and know that it is going to be available for another one), we
might hit an assertion that the color used for the assignment is still
in use.
This patch makes sure the changes on the live-ranges are properly
reflected in the LiveRegMatrix, so the assertions don't break.
An alternative could have been to remove the assertion, but it would
make the invariants of the code and the general reasoning more
complicated in my opnion.
http://llvm.org/PR33057
llvm-svn: 304603
Use the initializeXXX method to initialize the RABasic pass in the
pipeline. This enables us to take advantage of the .mir infrastructure.
llvm-svn: 304602
Summary:
This is to enable the new switch inline cost heuristic (r301649) by removing the
old heuristic as well as the flag itself.
In my experiment for LLVM test suite and spec2000/2006, +17.82% performance and
8% code size reduce was observed in spec2000/vertex with O3 LTO in AArch64.
No significant code size / performance regression was found in O3/O2/Os. No
significant complain was reported from the llvm-dev thread.
Reviewers: hans, chandlerc, eraman, haicheng, mcrosier, bmakam, eastig, ddibyend, echristo
Reviewed By: echristo
Subscribers: javed.absar, kristof.beyls, echristo, aemerson, rengolin, mehdi_amini
Differential Revision: https://reviews.llvm.org/D32653
llvm-svn: 304594
Since r288804, we try to lower build_vectors on AVX using broadcasts of
float/double. However, when we broadcast integer values that happen to
have a NaN float bitpattern, we lose the NaN payload, thereby changing
the integer value being broadcast.
This is caused by ConstantFP::get, to which we pass the splat i32 as
a float (by bitcasting it using bitsToFloat). ConstantFP::get takes
a double parameter, so we end up lossily converting a single-precision
NaN to double-precision.
Instead, avoid any kinds of conversions by directly building an APFloat
from the splatted APInt.
Note that this also fixes another piece of code (broadcast of
subvectors), that currently isn't susceptible to the same problem.
Also note that we could really just use APInt and ConstantInt
throughout: the constant pool type doesn't matter much. Still, for
consistency, use the appropriate type.
llvm-svn: 304590
Previously we would expect certain subsections to appear
in a certain order because some subsections would reference
other subsections, but in practice we need to support
arbitrary orderings since some object file and PDB file
producers generate them this way. This also paves the
way for supporting Yaml <-> Object File conversion of
CodeView, since Object Files typically have quite a
large number of subsections in their debug info.
Differential Revision: https://reviews.llvm.org/D33807
llvm-svn: 304588
Summary:
As shown in the test case, SROA was crashing when trying to split
stores (to the alloca) of loads (from anywhere), because it assumed
the pointer operand to the loads and stores had to have the same
address space. This isn't the case. Make sure to use the correct
pointer type for both the load and the store.
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D32593
llvm-svn: 304585
Since D17854 LinkerSubsectionsViaSymbols is unnecessary.
It is interfering with ThinLTO implementation of CFI-ICall, where
the aliases used on the !LinkerSubsectionsViaSymbols branch are
needed to export jump tables to ThinLTO backends.
llvm-svn: 304582
This way dead stripping results are recorded in combined summary and
can be used in regular LTO passes.
Differential Revision: https://reviews.llvm.org/D33615
llvm-svn: 304577
This initial patch doesn't actually do much useful. It's just to show where the new code goes. Once this is in, I'll extend the verification logic to check more useful properties.
For those curious, the more complicated version of this patch already found one very suspicious thing.
Differential Revision: https://reviews.llvm.org/D33819
llvm-svn: 304564
Summary:
The constant folding code currently assumes that the constant expression will always be on the left and the simple null will be on the right. But that's not true at least on the path from InstSimplify.
This patch adds support to ConstantFolding to detect the reversed case.
Reviewers: spatel, dberlin, majnemer, davide, joey
Reviewed By: joey
Subscribers: joey, llvm-commits
Differential Revision: https://reviews.llvm.org/D33801
llvm-svn: 304559
-enable-si-insert-waitcnts=1 becomes the default
-enable-si-insert-waitcnts=0 to use old pass
Differential Revision: https://reviews.llvm.org/D33730
llvm-svn: 304551
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
LBU instruction is transformed into 16-bit instruction LBU16
LHU instruction is transformed into 16-bit instruction LHU16
SB instruction is transformed into 16-bit instruction SB16
SH instruction is transformed into 16-bit instruction SH16
Differential Revision: https://reviews.llvm.org/D33091
llvm-svn: 304550
insertps behaves differently, the register form selects from an input
register based on the immediate operand while the memory form just loads
the given address. We have custom code to change the immediate in cases
where that's legal, so completely remove insertps from the generated
tables.
llvm-svn: 304540
When a global may be preempted it needs to be accessed directly, instead of
indirectly through a MergedGlobals symbol, for the preemption to work.
This fixes PR33136.
Differential Revision: https://reviews.llvm.org/D33727
llvm-svn: 304537
Very very similar to the support for arrays. As with arrays, we don't
support returning large structs that wouldn't fit in R0-R3. Most
front-ends would likely use sret arguments for that anyway.
The only significant difference is that when splitting a struct, we need
to make sure we set the correct original alignment on each member,
otherwise it may get split incorrectly between stack and registers.
llvm-svn: 304536
Summary:
Optimization passes may remove llvm.coro.suspend intrinsic while leaving matching llvm.coro.save intrinsic orphaned.
Make sure we clean up orphaned coro.saves. The bug manifested with a crash similar to this:
```
llvm_unreachable("Unknown type!");
llvm::MVT::getVT (Ty=0x489518, HandleUnknown=false)
llvm::EVT::getEVT
llvm::TargetLoweringBase::getValueType
llvm::ComputeValueVTs
llvm::SelectionDAGBuilder::visitTargetIntrinsic
```
Reviewers: GorNishanov
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D33817
llvm-svn: 304518
builtin_expect applied on && or || expressions were not
handled properly before. With this patch, the problem is fixed.
Differential Revision: http://reviews.llvm.org/D33164
llvm-svn: 304517
Undefined externals don't need to have a size or an offset.
This was broken by r303915. Added a test for this case.
This fixes the "Compile LLVM Torture (o)" step on the wasm
waterfall.
Differential Revision: https://reviews.llvm.org/D33803
llvm-svn: 304505
Summary:
As we teach Clang to use ThinkLTO + new PM, it's good for the users to
inject through Config, instead of setting a flag in the LTOBackend
library. Move the flag to llvm-lto2.
As it moves to llvm-lto2, a new name -use-new-pm seems simpler and as
clear.
Reviewers: davide, tejohnson
Subscribers: mehdi_amini, Prazek, inglorion, eraman, chandlerc, llvm-commits
Differential Revision: https://reviews.llvm.org/D33799
llvm-svn: 304492
Object files have symbol records not aligned to any particular
boundary (e.g. 1-byte aligned), while PDB files have symbol
records padded to 4-byte aligned boundaries. Since they share
the same reading / writing code, we have to provide an option to
specify the alignment and propagate it up to the producer or
consumer who knows what the alignment is supposed to be for the
given container type.
Added a test for this by modifying the existing PDB -> YAML -> PDB
round-tripping code to round trip symbol records as well as types.
Differential Revision: https://reviews.llvm.org/D33785
llvm-svn: 304484
The AArch64 backend marks calls that involve aggregate function
arguments as having an implicit def of SP. We already have the same
workaround in LiveDebugValues and in DbgValueHistoryCalculator for SP
clobbers in register masks. This adds register defs to the list.
Fixes rdar://problem/30361929 and Swift SR-3851.
llvm-svn: 304471
The added test case is to check whether the simplified value is passed to
getGEPCost().
Differential Revision: https://reviews.llvm.org/D33779
llvm-svn: 304454
The lowerer wrongly assumes the ICMP instruction
1) always has a constant operand;
2) the operand has value 0.
It also assumes the expected value can only be one, thus
other values other than one will be considered 'zero'.
This leads to wrong profile annotation when other integer values
are used other than 0, 1 in the comparison or in the expect intrinsic.
Also missing is handling of equal predicate.
This patch fixes all the above problems.
Differential Revision: http://reviews.llvm.org/D33757
llvm-svn: 304453
Summary:
Sort OpsToRename before iterating to make iteration order deterministic.
Thanks to Daniel Berlin for the sorting logic.
Reviewers: dberlin, RKSimon, efriedma, davide
Reviewed By: dberlin, davide
Subscribers: sanjoy, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D33265
llvm-svn: 304447
The initial assumption was that the simplification would converge to a
fixed point relatvely quickly. Turns out that there are legitimate situa-
tions where the complexity of the code causes it to take a large number
of iterations.
Two main changes:
- Instead of aborting upon hitting the limit, simply return nullptr.
- Reduce the limit to 10,000 from 100,000.
llvm-svn: 304441
Summary:
Without using a fixup in this case, BL will be used instead of BLX to
call internal ARM functions from Thumb functions.
Reviewers: rafael, t.p.northover, peter.smith, kristof.beyls
Reviewed By: peter.smith
Subscribers: srhines, echristo, aemerson, rengolin, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33436
llvm-svn: 304413
Based on the original patch by Davide, but I've adjusted the API exposed
to just be different entry points rather than exposing more state
parameters. I've factored all the common logic out so that we don't have
any duplicate pipelines, we just stitch them together in different ways.
I think this makes the build easier to reason about and understand.
This adds a direct method for getting the module simplification pipeline
as well as a method to get the optimization pipeline. While not my
express goal, this seems nice and gives a good place comment about the
restrictions that are imposed on them.
I did make some minor changes to the way the pipelines are structured
here, but hopefully not ones that are significant or controversial:
1) I sunk the PGO indirect call promotion to only be run when we have
PGO enabled (or as part of the special ThinLTO pipeline).
2) I made the extra GlobalOpt run in ThinLTO just happen all the time
and at a slightly more powerful place (before we remove available
externaly functions). This seems like general goodness and not a big
compile time sink, so it didn't make sense to *only* use it in
ThinLTO. Fewer differences in the pipeline makes everything simpler
IMO.
3) I hoisted the ThinLTO stop point pre-link above the the RPO function
attr inference. The RPO inference won't infer anything terribly
meaningful pre-link (recursiveness?) so it didn't make a lot of
sense. But if the placement of RPO inference starts to matter, we
should move it to the canonicalization phase anyways which seems like
a better place for it (and there is a FIXME to this effect!). But
that seemed a bridge too far for this patch.
If we ever need to parameterize these pipelines more heavily, we can
always sink the logic to helper functions with parameters to keep those
parameters out of the public API. But the changes above seemed minor
that we could possible get away without the parameters entirely.
I added support for parsing 'thinlto' and 'thinlto-pre-link' names in
pass pipelines to make it easy to test these routines and play with them
in larger pipelines. I also added a really basic manifest of passes test
that will show exactly how the pipelines behave and work as well as
making updates to them clear.
Lastly, this factoring does introduce a nesting layer of module pass
managers in the default pipeline. I don't think this is a big deal and
the flexibility of decoupling the pipelines seems easily worth it.
Differential Revision: https://reviews.llvm.org/D33540
llvm-svn: 304407
Summary:
Add an early combine to match patterns such as:
(i16 bitcast (v16i1 x))
->
(i16 movmsk (v16i8 sext (v16i1 x)))
This combine needs to happen early enough before
type-legalization scalarizes the result of the setcc.
Reviewers: igorb, craig.topper, RKSimon
Subscribers: delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D33311
llvm-svn: 304406
Summary: This pattern is no very useful per se, but it exposes optimization for toehr patterns that wouldn't kick in otherwize. It's very common and worth optimizing for.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32756
llvm-svn: 304402
Summary: Also see D33429 for other ThinLTO + New PM related changes.
Reviewers: davide, chandlerc, tejohnson
Subscribers: mehdi_amini, Prazek, cfe-commits, inglorion, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D33525
llvm-svn: 304378
Summary: LiveRangeShrink pass moves instruction right after the definition with the same BB if the instruction and its operands all have more than one use. This pass is inexpensive and guarantees optimal live-range within BB.
Reviewers: davidxl, wmi, hfinkel, MatzeB, andreadb
Reviewed By: MatzeB, andreadb
Subscribers: hiraditya, jyknight, sanjoy, skatkov, gberry, jholewinski, qcolombet, javed.absar, krytarowski, atrick, spatel, RKSimon, andreadb, MatzeB, mehdi_amini, mgorny, efriedma, davide, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32563
llvm-svn: 304371
We should have a single call site entry with no landing pad. This
indicates that no EH action should be taken and the unwinder should
unwind to the next frame.
We currently don't recognize __gxx_personality_seh0 as a known
personality, so we forcibly emit a table, and that table was wrong. This
was filed as PR33220. Now we emit a correct table for that personality.
The next step is to recognize that we can completely skip the table for
this personality.
llvm-svn: 304363
Summary:
Don't assign values to undefined references, simply don't emit those
reference edges as they are not useful (we were already not emitting
call edges to undefined refs).
Also, streamline the later lookup of value ids when writing the
summaries, by combining the check for value id existence with the access
of that value id.
Reviewers: pcc
Subscribers: Prazek, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D33634
llvm-svn: 304323
Summary:
If we attempt to unfold an SUnit in ScheduleDAG that results in
finding an already scheduled load, we must should abort the
unfold as it will not improve scheduling.
This fixes PR32610.
Reviewers: jmolloy, sunfish, bogner, spatel
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D32911
llvm-svn: 304321
This adds a callback to the LLVMTargetMachine that lets target indicate
that they do not pass the machine verifier checks in all cases yet.
This is intended to be a temporary measure while the targets are fixed
allowing us to enable the machine verifier by default with
EXPENSIVE_CHECKS enabled!
Differential Revision: https://reviews.llvm.org/D33696
llvm-svn: 304320
Fixes PPCTTIImpl::getCacheLineSize() returning the wrong cache line size for
newer ppc processors.
Commiting on behalf of Stefan Pintilie.
Differential Revision: https://reviews.llvm.org/D33656
llvm-svn: 304317
This reverts commit r304310.
It caused build failures in polly and mingw
due to undefined reference to
llvm::RTLIB::getMEMCPY_ELEMENT_ATOMIC.
llvm-svn: 304315
This patch does an inline expansion of memcmp.
It changes the memcmp library call into an inline expansion when the size is
known at compile time and is under a target specified threshold.
This expansion is implemented in CodeGenPrepare and expands into straight line
code. The target specifies a maximum load size and the expansion works by using
this size to load the two sources, compare, and exit early if a difference is
found. It also has a special case when the memcmp result is used in a compare
to zero equality.
Differential Revision: https://reviews.llvm.org/D28637
llvm-svn: 304313
- new waitcnt pass remains off by default; -enable-si-insert-waitcnts=1 to enable it
- fix handling of PERMUTE ops
- fix insertion of waitcnt instrs at function begin/end ( port of analogous code that was added to old waitcnt pass )
- add new test
Differential Revision: https://reviews.llvm.org/D33114
llvm-svn: 304311
Summary:
Expanding the loop idiom test for memcpy to also recognize unordered atomic memcpy.
The only difference for recognizing
an unordered atomic memcpy and instead of a normal memcpy is
that the loads and/or stores involved are unordered atomic operations.
Background: http://lists.llvm.org/pipermail/llvm-dev/2017-May/112779.html
Patch by Daniel Neilson!
Reviewers: reames, anna, skatkov
Reviewed By: reames
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33243
llvm-svn: 304310
Correct references to alignment of store which may be deleted in a
previous iteration of merge. Instead use first store that would be
merged.
Corrects pr33172's use-after-poison caught by ASan.
Reviewers: spatel, hfinkel, RKSimon
Reviewed By: RKSimon
Subscribers: thegameg, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33686
llvm-svn: 304299
There are some VectorShuffle Nodes in SDAG which can be selected to XXPERMDI
Instruction, this patch recognizes them and does the selection to improve
the PPC performance.
Differential Revision: https://reviews.llvm.org/D33404
llvm-svn: 304298
This patch builds upon https://reviews.llvm.org/rL302810 to add
handling for bitwise logical operations in general purpose registers.
The idea is to keep the values in GPRs as long as possible - only
extracting them to a condition register bit when no further operations
are to be done.
Differential Revision: https://reviews.llvm.org/D31851
llvm-svn: 304282
Thanks to Galina Kistanova for finding the missing break!
When trying to make a test for this, I realized our logic for handling
extractvalue/insertvalue/... is somewhat broken. This makes constructing
a test-case for this missing break nontrivial.
llvm-svn: 304275
This test assumes that llc can infer a default triple. I'm not sure why
exactly, but the Verify MachineInstrs bot requires tests to be explicit
about this dependency.
This commit follows the lead from r248452 and adds in 'REQUIRES:
default_triple' to omit-empty.ll.
Bot URL: http://lab.llvm.org:8080/green/job/Verify-Machineinstrs_AArch64/7500
llvm-svn: 304269
This is the equivalent of r304048 for ARM:
- Rewrite livein calculation to use the computeLiveIns() helper
function. This is slightly less efficient but easier to reason about
and doesn't unnecessarily add pristine and reserved registers[1]
- Zero the status register at the beginning of the loop to make sure it
has a defined value.
- Remove kill flags of values that need to stay alive throughout the loop.
[1] An upcoming commit of mine will tighten the MachineVerifier to catch
these.
llvm-svn: 304267
Summary:
AntiDepBreaker intends to add all live-outs, including the implicit
CSRs, in StartBlock. r299124 was done without understanding that
intention.
Now with the live-ins propagated correctly (D32464), we can revert this change.
Reviewers: MatzeB, qcolombet
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D33697
llvm-svn: 304251
There is no guarantee that the first use of a constant that is traversed
is actually the first in the related basic block. Thus, if we use that
as the insertion point we may end up with definitions that don't
dominate there use.
llvm-svn: 304244
This will fail if you configure with e.g. -Wno-unknown-warning-option.
Change it to check for 'warning:' just like we did for 'error:' in
r289484.
llvm-svn: 304239
r303763 caused build failures in some out-of-tree tests due to an assertion in
TTI. The original patch updated cost estimates for induction variable update
instructions marked for scalarization. However, it didn't consider that the
incoming value of an induction variable phi node could be a cast instruction.
This caused queries for cast instruction costs with a mix of vector and scalar
types. This patch includes a fix for cast instructions and the test case from
PR33193.
The fix was suggested by Jonas Paulsson <paulsson@linux.vnet.ibm.com>.
Reference: https://bugs.llvm.org/show_bug.cgi?id=33193
Original Differential Revision: https://reviews.llvm.org/D33457
llvm-svn: 304235
For multiplications of 64-bit values (giving 64-bit result), detect
cases where the arguments are sign-extended 32-bit values, on a per-
operand basis. This will allow few patterns to match a wider variety
of combinations in which extensions can occur.
llvm-svn: 304223
An encoding does not allow to use SDWA in an instruction with
scalar operands, either literals or SGPRs. That is however possible
to copy these operands into a VGPR first.
Several copies of the value are produced if multiple SDWA conversions
were done. To cleanup MachineLICM (to hoist copies out of loops),
MachineCSE (to remove duplicate copies) and SIFoldOperands (to replace
SGPR to VGPR copy with immediate copy right to the VGPR) runs are added
after the SDWA pass.
Differential Revision: https://reviews.llvm.org/D33583
llvm-svn: 304219
This adds assembler / disassembler support for the decimal
floating-point instructions. Since LLVM does not yet have
support for decimal float types, these cannot be used for
codegen at this point.
llvm-svn: 304203
This adds assembler / disassembler support for the hexadecimal
floating-point instructions. Since the Linux ABI does not use
any hex float data types, these are not useful for codegen.
llvm-svn: 304202
The MC ConstantPool class uses a DenseMap to track generated constants, with
the int64_t value of the constant as the key. This fails when values of
0x7fffffffffffffff or 0x7ffffffffffffffe are inserted into the constant pool, as
these are sentinel values for DenseMap.
The fix is to use std::map instead, which doesn't use sentinel values.
Differential revision: https://reviews.llvm.org/D33667
llvm-svn: 304199
xchg with a mem operand has different locking semantics. If we unfold it
into a xchg r,r we will loose the implicit lock. Likewise we never want
to fold a register xchg into a memory one as it would be a lot slower.
This triggers during LLVM selfhost.
llvm-svn: 304163
The extending load possibility was missed in:
https://reviews.llvm.org/rL304072
We might want to handle this cases as a follow-up, but bailing out for now
to avoid miscompiling.
llvm-svn: 304153
Clang coerces structs into arrays, so it's a good idea to support them.
Most of the support boils down to getting the splitToValueTypes helper
to actually split types. We then use G_INSERT/G_EXTRACT to deal with the
parts.
llvm-svn: 304132
This is really a workaround for ThinLTO in particular - since it can
import partial CUs that may end up looking very similar/the same as
the same partial import in another ThinLTO compile.
An alternative fix would be to change the DICompileUnit metadata to
include a "primary file" or the like - and when importing for ThinLTO
set the primary file to the name of the DICompileUnit that is being
imported into. This involves changing the schema and would reduce the
excessive uniqueness in the hash that this change creates - allowing
diagnosing of more duplicate CUs than will be caught with this change.
But duplicate CUs can still be caught in non-ThinLTO builds & are mostly
a nuisance rather than a particularly deliberate/effective tool for
finding broken code. (arguably the hash could always include the dwo
file and nothing in fission would break, I think..)
Reapply of r304119 after adding a triple to the test and moving it
to the X86 directory.
llvm-svn: 304130
When the only use of a CU is for a subprogram that's only emitted into
the using CU (to avoid cross-CU references in DWO files), avoid creating
that CU at all.
Reapply of r304111 after adding a triple to the test and moving it
to the X86 directory.
llvm-svn: 304129
The reverted change introdued assertions ala:
"MachineBasicBlock::succ_iterator
llvm::MachineBasicBlock::removeSuccessor(succ_iterator, bool): Assertion
`I != Successors.end() && "Not a current successor!"'
Mikael, the original committer, wrote me that he is working on a fix, but that
it likely will take some time to get this resolved. As this bug is one of the
last two issues that keep the AOSP buildbot from turning green, I revert the
original commit r302876.
I am looking forward to see this recommitted after the assertion has been
resolved.
llvm-svn: 304128
This was reverted due to buildbot breakages and I was not familiar
with this code to investigate it. But while trying to get a
useful backtrace for the author, it turns out the fix was very
obvious. Resubmitting this patch as is, and will submit the
fix in a followup so that the fix is not hidden in the larger
CL.
llvm-svn: 304122
This reverts commit 28cb1003507f287726f43c771024a1dc102c45fe as well
as all subsequent followups. llvm-tblgen currently segfaults with
this change, and it seems it has been broken on the bots all
day with no fixes in preparation. See, for example:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/
llvm-svn: 304121
This is really a workaround for ThinLTO in particular - since it can
import partial CUs that may end up looking very similar/the same as
the same partial import in another ThinLTO compile.
An alternative fix would be to change the DICompileUnit metadata to
include a "primary file" or the like - and when importing for ThinLTO
set the primary file to the name of the DICompileUnit that is being
imported into. This involves changing the schema and would reduce the
excessive uniqueness in the hash that this change creates - allowing
diagnosing of more duplicate CUs than will be caught with this change.
But duplicate CUs can still be caught in non-ThinLTO builds & are mostly
a nuisance rather than a particularly deliberate/effective tool for
finding broken code. (arguably the hash could always include the dwo
file and nothing in fission would break, I think..)
llvm-svn: 304119
When the only use of a CU is for a subprogram that's only emitted into
the using CU (to avoid cross-CU references in DWO files), avoid creating
that CU at all.
llvm-svn: 304111
X86 backend holds huge tables in order to map between the register and memory forms of each instruction.
This TableGen Backend automatically generated all these tables with the appropriate flags for each entry.
Differential Revision: https://reviews.llvm.org/D32684
llvm-svn: 304088
Summary:
I believe https://reviews.llvm.org/rL302576 introduced two bugs:
1) it produces duplicate distinct variables for every: dbg.value describing the same variable.
To fix the problme I switched form getDistinct() to get() in DebugLoc.cpp: auto reparentVar = [&](DILocalVariable *Var) {
return DILocalVariable::getDistinct(
2) It passes NewFunction plain name as a linkagename parameter to Subprogram constructor. Breaks assert in:
|| DeclLinkageName.empty()) || LinkageName == DeclLinkageName) && "decl has a linkage name and it is different"' failed.
#9 0x00007f5010261b75 llvm::DwarfUnit::applySubprogramDefinitionAttributes(llvm::DISubprogram const*, llvm::DIE&) /home/gor/llvm/lib/CodeGen/AsmPrinter/DwarfUnit.cpp:1173:3
#
(Edit: reproducer added)
Here how https://reviews.llvm.org/rL302576 broke coroutine debug info.
Coroutine body of the original function is split into several parts by cloning and removing unneeded code.
All parts describe the original function and variables present in the original function.
For a simple case, prior to Split, original function has these two blocks:
```
PostSpill: ; preds = %AllocaSpillBB
call void @llvm.dbg.value(metadata i32 %x, i64 0, metadata !14, metadata !15), !dbg !13
store i32 %x, i32* %x.addr, align 4
...
and
sw.epilog: ; preds = %sw.bb
%x.addr.reload.addr = getelementptr inbounds %f.Frame, %f.Frame* %FramePtr, i32 0, i32 4, !dbg !20
%4 = load i32, i32* %x.addr.reload.addr, align 4, !dbg !20
call void @llvm.dbg.value(metadata i32 %4, i64 0, metadata !14, metadata !15), !dbg !13!14 = !DILocalVariable(name: "x", arg: 1, scope: !6, file: !7, line: 55, type: !11)
```
Note that in two blocks different expression represent the same original user variable X.
Before rL302576, for every cloned function there was exactly one cloned DILocalVariable(name: "x" as in:
```
define i8* @f(i32 %x) #0 !dbg !6 {
...
!6 = distinct !DISubprogram(name: "f", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55, flags: DIFlagPrototyped,
...
!14 = !DILocalVariable(name: "x", arg: 1, scope: !6, file: !7, line: 55, type: !11)
define internal fastcc void @f.resume(%f.Frame* %FramePtr) #0 !dbg !25 {
...
!25 = distinct !DISubprogram(name: "f", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55, flags: DIFlagPrototyped, isOptimized: false, unit: !0, variables: !2)
!28 = !DILocalVariable(name: "x", arg: 1, scope: !25, file: !7, line: 55, type: !11)
```
After rL302576, for every cloned function there were as many DILocalVariable(name: "x" as there were "call void @llvm.dbg.value" for that variable.
This was causing asserts in VerifyDebugInfo and AssemblyPrinter.
Example:
```
!27 = distinct !DISubprogram(name: "f", linkageName: "f.resume", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55,
!29 = distinct !DILocalVariable(name: "x", arg: 1, scope: !27, file: !7, line: 55, type: !11)
!39 = distinct !DILocalVariable(name: "x", arg: 1, scope: !27, file: !7, line: 55, type: !11)
!41 = distinct !DILocalVariable(name: "x", arg: 1, scope: !27, file: !7, line: 55, type: !11)
```
Second problem:
Prior to rL302576, all clones were described by DISubprogram referring to original function.
```
define i8* @f(i32 %x) #0 !dbg !6 {
...
!6 = distinct !DISubprogram(name: "f", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55, flags: DIFlagPrototyped,
define internal fastcc void @f.resume(%f.Frame* %FramePtr) #0 !dbg !25 {
...
!25 = distinct !DISubprogram(name: "f", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55, flags: DIFlagPrototyped,
```
After rL302576, DISubprogram for clones is of two minds, plain name refers to the original name, linkageName refers to plain name of the clone.
```
!27 = distinct !DISubprogram(name: "f", linkageName: "f.resume", scope: !7, file: !7, line: 55, type: !8, isLocal: false, isDefinition: true, scopeLine: 55,
```
I think the assumption in AsmPrinter is that both name and linkageName should refer to the same entity. It asserts here when they are not:
```
|| DeclLinkageName.empty()) || LinkageName == DeclLinkageName) && "decl has a linkage name and it is different"' failed.
#9 0x00007f5010261b75 llvm::DwarfUnit::applySubprogramDefinitionAttributes(llvm::DISubprogram const*, llvm::DIE&) /home/gor/llvm/lib/CodeGen/AsmPrinter/DwarfUnit.cpp:1173:3
```
After this fix, behavior (with respect to coroutines) reverts to exactly as it was before and therefore making them debuggable again, or even more importantly, compilable, with "-g"
Reviewers: dblaikie, echristo, aprantl
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33614
llvm-svn: 304079
The optimistic delinearization implemented in LLVM detects array sizes by
looking for non-linear products between parameters and induction variables.
In OpenCL code, such products often look like:
A[get_global_id(0) * N + get_global_id(1)]
Hence, the IV is hidden in the get_global_id() call and consequently
delinearization would fail as no induction variable is available that helps
us to identify N as array size parameter.
We now use a very simple heuristic to change this. We assume that each parameter
that comes directly from a function call is a hidden induction variable. As
a result, we can delinearize the access above to:
A[get_global_id(0)][get_global_id(1]
llvm-svn: 304073
If we have (extract_subvector(load wide vector)) with no other users,
that can just be (load narrow vector). This is intentionally conservative.
Follow-ups may loosen the one-use constraint to account for the extract cost
or just remove the one-use check.
The memop chain updating is based on code that already exists multiple times
in x86 lowering, so that should be pulled into a helper function as a follow-up.
Background: this is a potential improvement noticed via regressions caused by
making x86's peekThroughBitcasts() not loop on consecutive bitcasts (see
comments in D33137).
Differential Revision: https://reviews.llvm.org/D33578
llvm-svn: 304072
Summary:
This fixes introduction of an incorrect inttoptr/ptrtoint pair in
the included test case which makes use of non-integral pointers. I
suspect there are more cases like this left, but this takes care of
the one I was seeing at the moment.
Reviewers: sanjoy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D33129
llvm-svn: 304058
Rewrite fixupKills() to use the LivePhysRegs class. Simplifies the code
and fixes a bug where the CSR registers in return blocks where missed
leading to invalid kill flags. Also remove the unnecessary rule that we
wouldn't set kill flags on tied operands.
No tests as I have an upcoming commit improving MachineVerifier checks
to catch these cases in multiple existing lit tests.
llvm-svn: 304055
This reverts commit r299287 plus clean-ups.
The localizer pass is a helper pass that could be run at O0 in the GISel
pipeline to work around the deficiency of the fast register allocator.
It basically shortens the live-ranges of the constants so that the
allocator does not spill all over the place.
Long term fix would be to make the greedy allocator fast.
llvm-svn: 304051
The recommit is to fix a bug about ExtractValue and InsertValue ops. For those
ops, some varargs inside GVN::Expression are not value numbers but raw index
numbers. It is wrong to do phi-translate for raw index numbers, and the fix is
to stop doing that.
Right now scalarpre doesn't have phi-translate support, so it will miss some
simple pre opportunities. Like the following testcase, current scalarpre cannot
recognize the last "a * b" is fully redundent because a and b used by the last
"a * b" expr are both defined by phis.
long a[100], b[100], g1, g2, g3;
__attribute__((pure)) long goo();
void foo(long a, long b, long c, long d) {
g1 = a * b;
if (__builtin_expect(g2 > 3, 0)) {
a = c;
b = d;
g2 = a * b;
}
g3 = a * b; // fully redundant.
}
The patch adds phi-translate support in scalarpre. This is only a temporary
solution before the newpre based on newgvn is available.
Differential Revision: https://reviews.llvm.org/D32252
llvm-svn: 304050
- Rewrite livein calculation to use the computeLiveIns() helper
function. This is slightly less efficient but easier to reason about
and doesn't unnecessarily add pristine and reserved registers[1]
- Zero the status register at the beginning of the loop to make sure it
has a defined value.
- Remove kill flags of values that need to stay alive throughout the loop.
[1] An upcoming commit of mine will tighten the MachineVerifier to catch
these.
llvm-svn: 304048
It's a workaround because the test was flakey passing to begin with, but
it looks like (going off commit history) it really did want to test in
the presence of debug info, so keep that behavior (by adding something
to the CU so it's not dropped) & restore the flakey pass in the process.
(added a FIXME in case someone else decides to look at it later)
llvm-svn: 304042
[AMDGPU] add intrinsic for s_getpc
Summary: The s_getpc instruction is exposed as intrinsic llvm.amdgcn.s.getpc.
Patch by Tim Corringham
llvm-svn: 304031
The tests here are have operands commuted to provide more coverage. I also commuted one of the instructions in the scalar tests so the 4 tests cover the 4 commuted variations
Differential Revision: https://reviews.llvm.org/D33599
llvm-svn: 304021
Consistent with GCC and addresses a shortcoming with ThinLTO where many
imported CUs may end up being empty (because the functions imported from
them either ended up not being used (and were then discarded, since
they're imported as available_externally) or optimized away entirely).
Test cases previously testing empty CUs (either intentionally, or
because they didn't need anything more complicated) had a trivial 'int'
or similar basic type added to their retained types list.
This is a first order approximation - a deeper implementation could do
things like:
1) Be more lazy about construction of the CU - for example if two CUs
containing a single identical retained type are linked together, with
this change one of the two CUs will be produced but empty (since a
duplicate type won't be produced).
2) Go further and invert all the CU links the same way the subprogram
link is inverted - keep named CU lists of retained types, macros, etc,
and have those link back to the CU. Then if they're emitted, the CU is
emitted, but never otherwise - this would allow the metadata itself to
be dropped earlier too, though it seems unlikely that's an important
optimization as there shouldn't be many CUs relative to the number of
other entities.
llvm-svn: 304020
The whole-program-devirt pass needs to run at -O0 because only it
knows about the llvm.type.checked.load intrinsic: it needs to both
lower the intrinsic itself and handle it in the summary.
Differential Revision: https://reviews.llvm.org/D33571
llvm-svn: 304019
This produced 'strange' DWARF anyway - the CU would have no ranges (or
at least not a range including the inlined code) nor any subprogram or
inlined_subroutine - yet the line table would have entries for these
instructions.
(this actually becomes more relevant with changes coming after this,
where a CU without any contents will be omitted entirely - so there
would be no line table to put this on anyway)
llvm-svn: 304004
Re-commit r303938 and r303954 with a fix for addLiveIns(): the internal
addPristines() function must be called on an empty set or it may
accidentally reset saved registers.
- addLiveOutsNoPristines() needs to add callee saved registers that are
actually saved and restored somewhere to the set (they are not
pristine).
- Cleanup/rewrite the code for addLiveOuts()/addLiveOutsNoPristines().
This fixes the problem from D32156.
Differential Revision: https://reviews.llvm.org/D32464
llvm-svn: 304001
In the best case:
extract (binop (concat X1, X2), (concat Y1, Y2)), N --> binop XN, YN
...we kill all of the extract/concat and just have narrow binops remaining.
If only one of the binop operands is amenable, this transform is still
worthwhile because we kill some of the extract/concat.
Optional bitcasting makes the code more complicated, but there doesn't
seem to be a way to avoid that.
The TODO about extending to more than bitwise logic is there because we really
will regress several x86 tests including madd, psad, and even a plain
integer-multiply-by-2 or shift-left-by-1. I don't think there's anything
fundamentally wrong with this patch that would cause those regressions; those
folds are just missing or brittle.
If we extend to more binops, I found that this patch will fire on at least one
non-x86 regression test. There's an ARM NEON test in
test/CodeGen/ARM/coalesce-subregs.ll with a pattern like:
t5: v2f32 = vector_shuffle<0,3> t2, t4
t6: v1i64 = bitcast t5
t8: v1i64 = BUILD_VECTOR Constant:i64<0>
t9: v2i64 = concat_vectors t6, t8
t10: v4f32 = bitcast t9
t12: v4f32 = fmul t11, t10
t13: v2i64 = bitcast t12
t16: v1i64 = extract_subvector t13, Constant:i32<0>
There was no functional change in the codegen from this transform from what I
could see though.
For the x86 test changes:
1. PR32790() is the closest call. We don't reduce the AVX1 instruction count in that case,
but we improve throughput. Also, on a core like Jaguar that double-pumps 256-bit ops,
there's an unseen win because two 128-bit ops have the same cost as the wider 256-bit op.
SSE/AVX2/AXV512 are not affected which is expected because only AVX1 has the extract/concat
ops to match the pattern.
2. do_not_use_256bit_op() is the best case. Everyone wins by avoiding the concat/extract.
Related bug for IR filed as: https://bugs.llvm.org/show_bug.cgi?id=33026
3. The SSE diffs in vector-trunc-math.ll are just scheduling/RA, so nothing real AFAICT.
4. The AVX1 diffs in vector-tzcnt-256.ll are all the same pattern: we reduced the instruction
count by one in each case by eliminating two insert/extract while adding one narrower logic op.
https://bugs.llvm.org/show_bug.cgi?id=32790
Differential Revision: https://reviews.llvm.org/D33137
llvm-svn: 303997
Currently getOptimalMemOpType returns i32 for large enough sizes without
checking for alignment, leading to poor code generation when misaligned accesses
aren't permitted as we generate a word store then later split it up into byte
stores. This means we inadvertantly go over the MaxStoresPerMemcpy limit and for
memset we splat the memset value into a word then immediately split it up
again.
Fix this by leaving it up to FindOptimalMemOpLowering to figure out which type
to use, but also fix a bug there where it wasn't correctly checking if
misaligned memory accesses are allowed.
Differential Revision: https://reviews.llvm.org/D33442
llvm-svn: 303990
The patch rL303730 was reverted because test lsr-expand-quadratic.ll failed on
many non-X86 configs with this patch. The reason of this is that the patch
makes a correctless fix that changes optimizer's behavior for this test.
Without the change, LSR was making an overconfident simplification basing on a
wrong SCEV. Apparently it did not need the IV analysis to do this. With the
change, it chose a different way to simplify (that wasn't so confident), and
this way required the IV analysis. Now, following the right execution path,
LSR tries to make a transformation relying on IV Users analysis. This analysis
is target-dependent due to this code:
// LSR is not APInt clean, do not touch integers bigger than 64-bits.
// Also avoid creating IVs of non-native types. For example, we don't want a
// 64-bit IV in 32-bit code just because the loop has one 64-bit cast.
uint64_t Width = SE->getTypeSizeInBits(I->getType());
if (Width > 64 || !DL.isLegalInteger(Width))
return false;
To make a proper transformation in this test case, the type i32 needs to be
legal for the specified data layout. When the test runs on some non-X86
configuration (e.g. pure ARM 64), opt gets confused by the specified target
and does not use it, rejecting the specified data layout as well. Instead,
it uses some default layout that does not treat i32 as a legal type
(currently the layout that is used when it is not specified does not have
legal types at all). As result, the transformation we expect to happen does
not happen for this test.
This re-enabling patch does not have any source code changes compared to the
original patch rL303730. The only difference is that the failing test is
moved to X86 directory and now has requirement of running on x86 only to comply
with the specified target triple and data layout.
Differential Revision: https://reviews.llvm.org/D33543
llvm-svn: 303971
Prevailing symbol resolution is necessary for correctness. Without
this we can end up dropping a referenced linkonce symbol from the link.
Differential Revision: https://reviews.llvm.org/D33570
llvm-svn: 303939
I forgot to forward the chain, causing some missing instruction
dependencies. The test crashes the compiler without this patch.
Inspired by the test case, D33519 also tries to remove the extra sync.
Differential Revision: https://reviews.llvm.org/D33573
llvm-svn: 303931
Right now scalarpre doesn't have phi-translate support, so it will miss some
simple pre opportunities. Like the following testcase, current scalarpre cannot
recognize the last "a * b" is fully redundent because a and b used by the last
"a * b" expr are both defined by phis.
long a[100], b[100], g1, g2, g3;
__attribute__((pure)) long goo();
void foo(long a, long b, long c, long d) {
g1 = a * b;
if (__builtin_expect(g2 > 3, 0)) {
a = c;
b = d;
g2 = a * b;
}
g3 = a * b; // fully redundant.
}
The patch adds phi-translate support in scalarpre. This is only a temporary
solution before the newpre based on newgvn is available.
Differential Revision: https://reviews.llvm.org/D32252
llvm-svn: 303923
Rename the DEBUG_TYPE to match the names of corresponding passes where
it makes sense. Also establish the pattern of simply referencing
DEBUG_TYPE instead of repeating the passname where possible.
llvm-svn: 303921
Summary:
DbiStreamBuilder calculated the offset of the source file names inside
the file info substream as the size of the file info substream minus
the size of the file names. Since the file info substream is padded to
a multiple of 4 bytes, this caused the first file name to be aligned
on a 4-byte boundary. By contrast, DbiModuleList would read the file
names immediately after the file name offset table, without skipping
to the next 4-byte boundary. This change makes it so that the file
names are written to the location where DbiModuleList expects them,
and puts any necessary padding for the file info substream after the
file names instead of before it.
Reviewers: amccarth, rnk, zturner
Reviewed By: amccarth, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33475
llvm-svn: 303917
Also, include global entries for all data symbols, not
just external ones, since these are referenced by the
relocation records.
Add a test case that includes unnamed data.
Differential Revision: https://reviews.llvm.org/D33079
llvm-svn: 303915
Summary:
This is used in the Linux kernel, and effectively just means "print an
address". This brings back r193593.
Reviewed by: Renato Golin
Reviewers: t.p.northover, rengolin, richard.barton.arm, kristof.beyls
Subscribers: aemerson, javed.absar, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D33558
llvm-svn: 303901
This fixes an oversight in r300522, which changed alloca
dbg.values to no longer emit a DW_OP_deref.
The array.ll testcase was regenerated from source.
Fixes PR33166:
https://bugs.llvm.org/show_bug.cgi?id=33166
llvm-svn: 303897
Turns out gold doesn't use the DW_AT_GNU_pubnames to decide whether to
parse the rest of the DIEs when building gdb-index. This causes gold to
trip over LLVM's output when there are DW_FORM_ref_addr present.
Gold does use the presence of a debug_gnu_pub{names,types} entry for the
CU to skip parsing the debug_info portion, so make sure that's included
even when empty (technically, when empty there couldn't be any ref_addr
anyway - it only came up when gmlt didn't produce any (even non-empty)
pubnames - but given what that reveals about gold's implementation, this
seems like a good thing to do for consistency).
llvm-svn: 303894
Summary:
Previously, the yaml2pdb subcommand of llvm-pdbdump only
included object file names in module info if a module info stream was
present. This change makes it so that we include the object file name
even if there is no module info stream for the module. As a result,
running
llvm-pdbdump pdb2yaml -dbi-module-info original.pdb > original.yaml &&
llvm-pdbdump yaml2pdb -pdb=new.pdb original.yaml && llvm-pdbdump
pdb2yaml -dbi-module-info new.pdb > new.yaml now produces identical
original.yaml and new.yaml files.
Reviewers: amccarth, zturner
Reviewed By: zturner
Subscribers: fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D33463
llvm-svn: 303891
There's probably a lot more like this (see also comments in D33338 about responsibility),
but I suspect we don't usually get a visible manifestation.
Given the recent interest in improving InstCombine efficiency, another potential micro-opt
that could be repeated several times in this function: morph the existing icmp pred/operands
instead of creating a new instruction.
llvm-svn: 303860
AVX512_VPOPCNTDQ is a new feature set that was published by Intel.
The patch represents the LLVM side of the addition of two new intrinsic based instructions (vpopcntd and vpopcntq).
Differential Revision: https://reviews.llvm.org/D33169
llvm-svn: 303858
This patch provides an initial prototype for a pass that sinks instructions based on GVN information, similar to GVNHoist. It is not yet ready for commiting but I've uploaded it to gather some initial thoughts.
This pass attempts to sink instructions into successors, reducing static
instruction count and enabling if-conversion.
We use a variant of global value numbering to decide what can be sunk.
Consider:
[ %a1 = add i32 %b, 1 ] [ %c1 = add i32 %d, 1 ]
[ %a2 = xor i32 %a1, 1 ] [ %c2 = xor i32 %c1, 1 ]
\ /
[ %e = phi i32 %a2, %c2 ]
[ add i32 %e, 4 ]
GVN would number %a1 and %c1 differently because they compute different
results - the VN of an instruction is a function of its opcode and the
transitive closure of its operands. This is the key property for hoisting
and CSE.
What we want when sinking however is for a numbering that is a function of
the *uses* of an instruction, which allows us to answer the question "if I
replace %a1 with %c1, will it contribute in an equivalent way to all
successive instructions?". The (new) PostValueTable class in GVN provides this
mapping.
This pass has some shown really impressive improvements especially for codesize already on internal benchmarks, so I have high hopes it can replace all the sinking logic in SimplifyCFG.
Differential revision: https://reviews.llvm.org/D24805
llvm-svn: 303850
instrumenting code.
This is important in the new pass manager. The old pass manager's
inliner has a small DCE routine embedded within it. The new pass manager
relies on the actual GlobalDCE pass for this.
Without this patch, instrumentation profiling with the new PM results in
massive code bloat in the object files because the instrumentation
itself ends up preventing DCE from working to remove the code.
We should probably change the instrumentation (and/or DCE) so that we
can eliminate dead code even if instrumented, but we shouldn't even
spend the time generating instrumentation for that code so this still
seems like a good patch.
Differential Revision: https://reviews.llvm.org/D33535
llvm-svn: 303845
pass.
The original logic only considered direct successors of the hoisted
domtree nodes, but that isn't really enough. If there are other basic
blocks that are completely within the subtree, their successors could
just as easily be impacted by the hoisting.
The more I think about it, the more I think the correct update here is
to hoist every block on the dominance frontier which has an idom in the
chain we hoist across. However, this is subtle enough that I'd
definitely appreciate some more eyes on it.
Sadly, if this is the correct algorithm, it requires computing a (highly
localized) dominance frontier. I've done this in the simplest (IE, least
code) way I could come up with, but that may be too naive. Suggestions
welcome here, dominance update algorithms are not an area I've studied
much, so I don't have strong opinions.
In good news, with this patch, turning on simple unswitch passes the
LLVM test suite for me with asserts enabled.
Differential Revision: https://reviews.llvm.org/D32740
llvm-svn: 303843
Coverage instrumentation which does not instrument full post-dominators
and full-dominators may skip valid paths, as the reasoning for skipping
blocks may become circular.
This patch fixes that, by only skipping
full post-dominators with multiple predecessors, as such predecessors by
definition can not be full-dominators.
llvm-svn: 303827
Summary:
Frontend generates store instructions after allocas, for example:
```
define i8* @f(i64 %this) "coroutine.presplit"="1" personality i32 0 {
entry:
%this.addr = alloca i64
store i64 %this, i64* %this.addr
..
%hdl = call i8* @llvm.coro.begin(token %id, i8* %alloc)
```
Such instructions may require spilling into coro.frame, but, coro-frame address is only available after coro.begin and thus needs to be moved after coro.begin.
The only instructions that should not be moved are the arguments of coro.begin and all of their operands.
Reviewers: GorNishanov, majnemer
Reviewed By: GorNishanov
Subscribers: llvm-commits, EricWF
Differential Revision: https://reviews.llvm.org/D33527
llvm-svn: 303825
There are some VectorShuffle Nodes in SDAG which can be selected to XXSLDWI
instruction, this patch recognizes them and does the selection to improve the
PPC performance.
llvm-svn: 303822
This change allows llvm-nm to print symbols found in import libraries,
in part by allowing COFFImportFiles to be casted to SymbolicFiles.
Patch by Dave Lee!
llvm-svn: 303821
The swapped operands in the first test is a manifestation of an
inefficiency for vectors that doesn't exist for scalars because
the IRBuilder checks for an all-ones mask for scalars, but not
vectors.
llvm-svn: 303818
Summary: This code was migrated from InstCombine a few years ago. InstCombine had nearby code that would move Constants to the RHS for these, but InstSimplify doesn't have such code on this path.
Reviewers: spatel, majnemer, davide
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33473
llvm-svn: 303774
For non-uniform instructions marked for scalarization, we should update
`VectorTy` when computing instruction costs to reflect the scalar type. In
addition to determining instruction costs, this type is also used to signal
that all instructions in the loop will be scalarized. This currently affects
memory instructions and non-pointer induction variables and their updates. (We
also mark GEPs scalar after vectorization, but their cost is computed together
with memory instructions.) For scalarized induction updates, this patch also
scales the scalar cost by the vectorization factor, corresponding to each
induction step.
llvm-svn: 303763
Use ADDframe pseudo instruction instead.
This will fix machine verifier error, and will help to fix PR32146.
Differential Revision: https://reviews.llvm.org/D33452
llvm-svn: 303758
As noted in https://bugs.llvm.org/show_bug.cgi?id=33138 and
the comments, there are multiple ways to view this. If we
choose not to solve this in InstCombine, these tests will
serve as documentation of that choice.
llvm-svn: 303755
The solution for PR26702 ( https://bugs.llvm.org/show_bug.cgi?id=26702 )
added a canonicalization rule, but the minimal regression tests don't
demonstrate how that rule interacts with other folds.
llvm-svn: 303750
The loop vectorizer usually vectorizes any instruction it can and then
extracts the elements for a scalarized use. On SystemZ, all elements
containing addresses must be extracted into address registers (GRs). Since
this extraction is not free, it is better to have the address in a suitable
register to begin with. By forcing address arithmetic instructions and loads
of addresses to be scalar after vectorization, two benefits result:
* No need to extract the register
* LSR optimizations trigger (LSR isn't handling vector addresses currently)
Benchmarking show improvements on SystemZ with this new behaviour.
Any other target could try this by returning false in the new hook
prefersVectorizedAddressing().
Review: Renato Golin, Elena Demikhovsky, Ulrich Weigand
https://reviews.llvm.org/D32422
llvm-svn: 303744
Summary:
This is a fix for PR32538. MachineCSE first looks at MO.isDead(), but
if it is not marked dead, MachineCSE still wants to do its own check
to see if it is trivially dead. This check for the trivial case
assumed that physical registers cannot be live out of a block.
Patch by Mattias Eriksson.
Reviewers: qcolombet, jbhateja
Reviewed By: qcolombet, jbhateja
Subscribers: jbhateja, llvm-commits
Differential Revision: https://reviews.llvm.org/D33408
llvm-svn: 303731
When folding arguments of AddExpr or MulExpr with recurrences, we rely on the fact that
the loop of our base recurrency is the bottom-lost in terms of domination. This assumption
may be broken by an expression which is treated as invariant, and which depends on a complex
Phi for which SCEVUnknown was created. If such Phi is a loop Phi, and this loop is lower than
the chosen AddRecExpr's loop, it is invalid to fold our expression with the recurrence.
Another reason why it might be invalid to fold SCEVUnknown into Phi start value is that unlike
other SCEVs, SCEVUnknown are sometimes position-bound. For example, here:
for (...) { // loop
phi = {A,+,B}
}
X = load ...
Folding phi + X into {A+X,+,B}<loop> actually makes no sense, because X does not exist and cannot
exist while we are iterating in loop (this memory can be even not allocated and not filled by this moment).
It is only valid to make such folding if X is defined before the loop. In this case the recurrence {A+X,+,B}<loop>
may be existant.
This patch prohibits folding of SCEVUnknown (and those who use them) into the start value of an AddRecExpr,
if this instruction is dominated by the loop. Merging the dominating unknown values is still valid. Some tests that
relied on the fact that some SCEVUnknown should be folded into AddRec's are changed so that they no longer
expect such behavior.
llvm-svn: 303730
I suspect this buildbot has slow-incdec set by default, most likely due to
the default CPU having this set. This feature bit can prevent optsize from
having an effect on this IR.
llvm-svn: 303720
Otherwise we don't revisit an instruction that could be simplified,
and when we verify, we discover there's something that changed, i.e.
what we had wasn't a maximal fixpoint.
Fixes PR32836.
llvm-svn: 303715
Coverage instrumentation has an optimization not to instrument extra
blocks, if the pass is already "accounted for" by a
successor/predecessor basic block.
However (https://github.com/google/sanitizers/issues/783) this
reasoning may become circular, which stops valid paths from having
coverage.
In the worst case this can cause fuzzing to stop working entirely.
This change simplifies logic to something which trivially can not have
such circular reasoning, as losing valid paths does not seem like a
good trade-off for a ~15% decrease in the # of instrumented basic blocks.
llvm-svn: 303698
This fixes 17 of the 41 -verify-machineinstrs test failures identified in PR33045
Differential Revision: https://reviews.llvm.org/D33451
llvm-svn: 303691
Summary:
Promoting Alloca to Vector and Promoting Alloca to LDS are two independent handling of Alloca and should not affect each other.
As a result, we should not give up promoting to vector if there is not enough LDS. This patch factors out the local memory usage
related checking out and replace it after the calling convention checking.
Reviewer:
arsenm
Differential Revision:
http://reviews.llvm.org/D33139
llvm-svn: 303684
Perform DAG combine:
and (srl x, c), mask => shl (bfe x, nb + c, mask >> nb), nb
Where nb is a number of trailing zeroes in mask.
It replaces two instructions with two and BFE is generally a more
expensive one. However this is only done if we are selecting a byte
or word at an aligned boundary which results in a proper SDWA
operand pattern. It is only done if SDWA is supported.
TODO: improve SDWA pass to actually convert this pattern. It is not
done now because we have an immediate in the instruction, which has
be moved into a VGPR.
Differential Revision: https://reviews.llvm.org/D33455
llvm-svn: 303681
Summary:
A temporary workaround for PR32780 - rematerialized instructions accessing the same promoted global through different constant pool entries.
The patch turns off the globals promotion optimization leaving all its code in place, so that it can be easily turned on once PR32780 is fixed.
Since this is a miscompilation issue causing generation of misbehaving code, and the problem is very subtle, the patch might be valuable enough to get into 4.0.1.
Reviewers: efriedma, jmolloy
Reviewed By: efriedma
Subscribers: aemerson, javed.absar, llvm-commits, rengolin, asl, tstellar
Differential Revision: https://reviews.llvm.org/D33446
llvm-svn: 303679
Summary:
It's rare but a small number of patterns use IntInit's at the root of the match.
On X86, one such rule is enabled by the OptForSize predicate and causes the
compiler to use the smaller:
%0 = MOV32r1
instead of the usual:
%0 = MOV32ri 1
This patch adds support for matching IntInit's at the root and uses this as a
test case for the optsize attribute that was implemented in r301750
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32791
llvm-svn: 303678
Also, rename the tests and the file, add comments, and add more tests
because there are no existing tests for some of these folds.
These patterns are particularly important for crippled vector ISAs that
have limited compare predicates (PR33138).
llvm-svn: 303652
shl (or|add x, c2), c1 => or|add (shl x, c1), (c2 << c1)
This allows to fold a constant into an address in some cases as
well as to eliminate second shift if the expression is used as
an address and second shift is a result of a GEP.
Differential Revision: https://reviews.llvm.org/D33432
llvm-svn: 303641
The PowerPC part of processRelocationRef currently assumes that external
symbols can be identified by checking for SymType == SymbolRef::ST_Unknown.
This is actually incorrect in some cases, causing relocation overflows to
be mis-detected. The correct check is to test whether Value.SymbolName
is null.
Includes test case. Note that it is a bit tricky to replicate the exact
condition that triggers the bug in a test case. The one included here
seems to fail reliably (before the fix) across different operating
system versions on Power, but it still makes a few assumptions (called
out in the test case comments).
Also add ppc64le platform name to the supported list in the lit.local.cfg
files for the MCJIT and OrcMCJIT directories, since those tests were
currently not run at all.
Fixes PR32650.
Reviewer: hfinkel
Differential Revision: https://reviews.llvm.org/D33402
llvm-svn: 303637
This patch builds over https://reviews.llvm.org/rL303349 and replaces
the use of the condition only if it is safe to do so.
We should not blindly RAUW the condition if experimental.guard or assume
is a use of that
condition. This is because LVI may have used the guard/assume to
identify the
value of the condition, and RUAWing will fold the guard/assume and uses
before the guards/assumes.
Reviewers: sanjoy, reames, trentxintong, mkazantsev
Reviewed by: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33257
llvm-svn: 303633
Summary:
Added separate pseudo and real instruction for GFX9 SDWA instructions.
Currently supports only in assembler.
Depends D32493
Reviewers: vpykhtin, artem.tamazov
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D33132
llvm-svn: 303620
Summary:
This patch makes instruction fusion more aggressive by
* adding artificial edges between the successors of FirstSU and
SecondSU, similar to BaseMemOpClusterMutation::clusterNeighboringMemOps.
* updating PostGenericScheduler::tryCandidate to keep clusters together,
similar to GenericScheduler::tryCandidate.
This change increases the number of AES instruction pairs generated on
Cortex-A57 and Cortex-A72. This doesn't change code at all in
most benchmarks or general code, but we've seen improvement on kernels
using AESE/AESMC and AESD/AESIMC.
Reviewers: evandro, kristof.beyls, t.p.northover, silviu.baranga, atrick, rengolin, MatzeB
Reviewed By: evandro
Subscribers: aemerson, rengolin, MatzeB, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33230
llvm-svn: 303618
The default behavior of -Rpass-analysis=loop-vectorizer is to report only the
first reason encountered for not vectorizing, if one is found, at which time the
vectorizer aborts its handling of the loop. This patch allows multiple reasons
for not vectorizing to be identified and reported, at the potential expense of
additional compile-time, under allowExtraAnalysis which can currently be turned
on by Clang's -fsave-optimization-record and opt's -pass-remarks-missed.
Removed from LoopVectorizationLegality::canVectorize() the redundant checking
and reporting if we CantComputeNumberOfIterations, as LAI::canAnalyzeLoop() also
does that. This redundancy is caught by a lit test once multiple reasons are
reported.
Patch initially developed by Dror Barak.
Differential Revision: https://reviews.llvm.org/D33396
llvm-svn: 303613
This commit fixes a bug introduced in r301019 where optimizeLogicalImm
would replace a logical node's immediate operand that was CSE'd and
was also an operand of another node.
This commit fixes the bug by replacing the logical node instead of its
immediate operand.
rdar://problem/32295276
llvm-svn: 303607
Summary:
Add Max ModFlagBehavior, which can be used to take the max of two
module flag values when merging modules. Use it for the PIE and PIC
levels.
This avoids an error when we try to import from a module built -fpic
into a module built -fPIC, for example. For both PIE and PIC levels,
this will be legal, since the code generation gets more conservative
as the level is increased. Therefore we can take the max instead of
somehow trying to block importing between modules compiled with
different levels.
Reviewers: tmsriram, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33418
llvm-svn: 303590
When presented with an icmp/select pair, we can end up asking what would happen
if we replaced one constant with another in an instruction. This is a mistake,
while non-constant Values could become a constant, constants cannot change and
trying to do so can lead to completely invalid IR (a GEP referencing a
non-existant field in the original case).
llvm-svn: 303580
Previous algotirhm assumed that types and ids are in a single
unified stream. For inputs that come from object files, this
is the case. But if the input is already a PDB, or is the result
of a previous merge, then the types and ids will already have
been split up, in which case we need an algorithm that can
accept operate on independent streams of types and ids that
refer across stream boundaries to each other.
Differential Revision: https://reviews.llvm.org/D33417
llvm-svn: 303577
MachineInstructions that don't generate any code (such as
IMPLICIT_DEFs) should not generate any debug info either.
Fixes PR33107.
https://bugs.llvm.org/show_bug.cgi?id=33107
This reapplies r303566 without any modifications. The stage2 build
failures persisted even after reverting this patch, and looking back
through history, it looks like these tests are flaky.
llvm-svn: 303575
Summary:
With instrumentation profiling, when updating the VP metadata after
an inline, VP metadata on the inlined copy was inadvertantly having
all counts zeroed out. This was causing indirect calls from code inlined
during the call step to be marked as cold in the ThinLTO summaries and
not imported.
The CallerBFI needs to be passed down so that the CallSiteCount can be
computed from the profile summary info. With Sample PGO this was working
since the count is extracted from the branch weight metadata on the
call being inlined (even before we stopped looking at metadata for
non-sample PGO in r302844 this largely wasn't working for instrumentation
PGO since only promoted indirect calls would be getting inlined and have
the metadata).
Added an instrumentation PGO test and renamed the sample PGO test.
Reviewers: danielcdh, eraman
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D33389
llvm-svn: 303574
Turn expensive 64 bit shift into 32 bit if shift does not overflow int:
shl (ext x) => zext (shl x)
Differential Revision: https://reviews.llvm.org/D33367
llvm-svn: 303569
MachineInstructions that don't generate any code (such as
IMPLICIT_DEFs) should not generate any debug info either.
Fixes PR33107.
https://bugs.llvm.org/show_bug.cgi?id=33107
llvm-svn: 303566
This patch adds handling of the `micromips` and `nomicromips` attributes
passed by front-end. The patch depends on D33363.
Differential revision: https://reviews.llvm.org/D33364
llvm-svn: 303545
It's causing some buildbots to timeout whenever tablegen needs re-compilation,
particularly those with -fsanitize=memory but not only them. A compile time
regression was expected since it triples the amount of SelectionDAG rules we
are able to import but it's currently too high.
llvm-svn: 303542
Re-applying now that PR32825 which was raised on the commit this fixed up is now known to have also been fixed by this commit.
Original commit message:
Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 303540
Re-applying now that the open bug on this commit, PR32825, is known to be fixed.
Original commit message:
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 303539
This reverts commit r302416. This was a fixup for r286006, which has now been reverted so this doesn't apply (either in concept or in code).
This commit itself has no problems, but the underlying issue it was fixing has now disappeared from the codebase.
llvm-svn: 303536
llvm-symbolizer would fail to symbolize addresses in unlinked object
files when handling .dwo file data because the addresses would not be
relocated in the same way as the ranges in the skeleton CU in the object
file.
Fix that so object files can be symbolized the same as executables.
llvm-svn: 303532
This is a re-application of a r303497 that was reverted in r303498.
I thought it had broken a bot when it had not (the breakage did not
go away with the revert).
This change makes the split between the "exact" backedge taken count
and the "maximum" backedge taken count a bit more obvious. Both of
these are upper bounds on the number of times the loop header
executes (since SCEV does not account for most kinds of abnormal
control flow), but the latter is guaranteed to be a constant.
There were a few places where the max backedge taken count *was* a
non-constant; I've changed those to compute constants instead.
At this point, I'm not sure if the constant max backedge count can be
computed by calling `getUnsignedRange(Exact).getUnsignedMax()` without
losing precision. If it can, we can simplify even further by making
`getMaxBackedgeTakenCount` a thin wrapper around
`getBackedgeTakenCount` and `getUnsignedRange`.
llvm-svn: 303531
Taken from PR32845. Dan removed the most dominating leader check
in r303443, but we check this test anyway to make sure things
don't regress.
llvm-svn: 303515
Otherwise we end up miscompiling, transforming:
define i8 @tinky() {
%sext = sext i1 1 to i16
%hibit = lshr i16 %sext, 15
%tr = trunc i16 %hibit to i8
ret i8 %tr
}
into:
%sext = sext i1 1 to i8
ret i8 %sext
and the first get folded to ret i8 1, while the second gets folded
to ret i8 -1.
Eventually we should get rid of this transform entirely, but for now,
this at least fixes a know correctness bug.
Differential Revision: https://reviews.llvm.org/D33338
llvm-svn: 303513
As discussed in:
https://reviews.llvm.org/D33338
...we may be able to remove a wider pattern match by doing these more
basic canonicalizations.
llvm-svn: 303504
PPC backend eliminates compare instructions by using record-form instructions in PPCInstrInfo::optimizeCompareInstr, which is called from peephole optimization pass.
This patch improves this optimization to eliminate more compare instructions in two types of common case.
- comparison against a constant 1 or -1
The record-form instructions set CR bit based on signed comparison against 0. So, the current implementation does not exploit the record-form instruction for comparison against a non-zero constant.
This patch enables record-form optimization for constant of 1 or -1 if possible; it changes the condition "greater than -1" into "greater than or equal to 0" and "less than 1" into "less than or equal to 0".
With this patch, compare can be eliminated in the following code sequence, as an example.
uint64_t a, b;
if ((a | b) & 0x8000000000000000ull) { ... }
else { ... }
- andi for 32-bit comparison on PPC64
Since record-form instructions execute 64-bit signed comparison and so we have limitation in eliminating 32-bit comparison, i.e. with cmplwi, using the record-form. The original implementation already has such checks but andi. is not recognized as an instruction which executes implicit zero extension and hence safe to convert into record-form if used for equality check.
%1 = and i32 %a, 10
%2 = icmp ne i32 %1, 0
br i1 %2, label %foo, label %bar
In this simple example, LLVM generates andi. + cmplwi + beq on PPC64.
This patch make it possible to eliminate the cmplwi for this case.
I added andi. for optimization targets if it is safe to do so.
Differential Revision: https://reviews.llvm.org/D30081
llvm-svn: 303500
This change makes the split between the "exact" backedge taken count
and the "maximum" backedge taken count a bit more obvious. Both of
these are upper bounds on the number of times the loop header
executes (since SCEV does not account for most kinds of abnormal
control flow), but the latter is guaranteed to be a constant.
There were a few places where the max backedge taken count *was* a
non-constant; I've changed those to compute constants instead.
At this point, I'm not sure if the constant max backedge count can be
computed by calling `getUnsignedRange(Exact).getUnsignedMax()` without
losing precision. If it can, we can simplify even further by making
`getMaxBackedgeTakenCount` a thin wrapper around
`getBackedgeTakenCount` and `getUnsignedRange`.
llvm-svn: 303497
Summary: This allows pthread_self to be pulled out of a loop by LICM.
Reviewers: hfinkel, arsenm, davide
Reviewed By: davide
Subscribers: davide, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D32782
llvm-svn: 303495
Summary: Added the new modules in the Object/ folder. Updated the
llvm-cvtres interface as well, and added additional tests.
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33180
llvm-svn: 303480
In the case where we have an operand defined by a lod of the
same memory location. Historically this was a VariableExpression
because we wanted to make sure they ended up in the same class,
but if we create the right expression, they end up in the same
class anyway.
Fixes PR32897. Thanks to Dan for the detailed discussion and the
fix suggestion.
llvm-svn: 303475
This reapplies commit r303438 modified to not verify cross-imported
bitcode in FunctionImporter.
rdar://problem/31233625
Differential Revision: https://reviews.llvm.org/D33370
llvm-svn: 303470
Refactor the strlen optimization code to work for both strlen and wcslen.
This especially helps with programs in the wild where people pass
L"string"s to const std::wstring& function parameters and the wstring
constructor gets inlined.
This also fixes a lingerind API problem/bug in getConstantStringInfo()
where zeroinitializers would always give you an empty string (without a
length) back regardless of the actual length of the initializer which
did not work well in the TrimAtNul==false causing the PR mentioned
below.
Note that the fixed getConstantStringInfo() needed fixes to SelectionDAG
memcpy lowering and may lead to some cases for out-of-bounds
zeroinitializer accesses not getting optimized anymore. So some code
with UB may produce out of bound memory reads now instead of just
producing zeros.
The refactoring "accidentally" fixes http://llvm.org/PR32124
Differential Revision: https://reviews.llvm.org/D32839
llvm-svn: 303461
This is a complicated bug involving two issues:
1. What do we do with phi nodes when we prove all arguments are not
live?
2. When is it safe to use value leaders to determine if we can ignore
an argumnet?
llvm-svn: 303453
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
llvm-svn: 303446
Summary:
NewGVN: Handle equivalence between phi of ops and op of phis.
This makes our GVN mostly-complete. It would be complete, modulo some
deliberate choices we make. This means it detects roughly all herband
equivalences in polynomial time, including cases notoriously hard for
other GVN's to detect. It also detects a very large swath of the
cases we currently rely on instcombine to detect that involve folding
upwards through phis.
Fixes PR 31125, 31463, PR 31868
Reviewers: davide
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D32151
llvm-svn: 303444
Summary:
While this makes some case better and some case worse - so it's unclear if it is a worthy combine just by itself - this is a useful canonicalisation.
As per discussion in D32756 .
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32916
llvm-svn: 303441
This patch defines the i1 type as illegal in the X86 backend for AVX512.
For DAG operations on <N x i1> types (build vector, extract vector element, ...) i8 is used, and should be truncated/extended.
This should produce better scalar code for i1 types since GPRs will be used instead of mask registers.
Differential Revision: https://reviews.llvm.org/D32273
llvm-svn: 303421
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
llvm-svn: 303409
Similar to my previous fix, it turns out llvm-pdbdump has been
printing an incorrect value since the beginning of time, but
we didn't know it was incorrect. Specifically, we were interpreting
a TypeIndex as referencing a type from the TPI stream when it
actually should come from the IPI stream. So we were printing a
string that looked like a valid string, but was just from the
wrong place.
llvm-svn: 303403
pruneSubRegValues() needs to remove subregister ranges starting at
instructions that later get removed by eraseInstrs(). It missed to check
one case in which eraseInstrs() would remove an instruction.
Fixes http://llvm.org/PR32688
llvm-svn: 303396
We can have cycles between PHIs and this causes singleReachablePhi()
to call itself indefintely (until we run out of stack). The proper
solution would be that of computing SCCs, but it's not worth for
now, so just keep a visited set and give up when we find a cycle.
Thanks to Dan for the discussion/help with this.
Fixes PR33014.
llvm-svn: 303393
Merging PDBs is a feature that will be used heavily by
the linker. The functionality already exists but does not
have deep test coverage because it's not easily exposed through
any tools. This patch aims to address that by adding the
ability to merge PDBs via llvm-pdbdump. It takes arbitrarily
many PDBs and outputs a single PDB.
Using this new functionality, a test is added for merging
type records. Future patches will add the ability to merge
symbol records, module information, etc.
llvm-svn: 303389
Currently m_Not only works the canonical xor X, -1 form that InstCombine produces. InstSimplify can't rely on this canonicalization.
Differential Revision: https://reviews.llvm.org/D33331
llvm-svn: 303379
This also reverts follow-ups r303292 and r303298.
It broke some Chromium tests under MSan, and apparently also internal
tests at Google.
llvm-svn: 303369
The testcase in PR33077 generates a LSR Use Formula with two SCEVAddRecExprs for the same
loop. Such uncommon formula will become non-canonical after GenerateTruncates adds sign
extension to the ScaledReg of the Formula, and it will break the assertion that every
Formula to be inserted is canonical.
The fix is to call canonicalize for the raw Formula generated by GenerateTruncates
before inserting it.
llvm-svn: 303361
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
llvm-svn: 303360
Summary:
We have a bug when RAUWing the condition if experimental.guard or assumes is a use of that
condition. This is because LazyValueInfo may have used the guards/assumes to identify the
value of the condition at the end of the block. RAUW replaces the uses
at the guard/assume as well as uses before the guard/assume. Both of
these are incorrect.
For now, disable RAUW for conditions and fix the logic as a next
step: https://reviews.llvm.org/D33257
Reviewers: sanjoy, reames, trentxintong
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33279
llvm-svn: 303349
Summary:
There should be no intesection between SDWA operands and potential MIs. E.g.:
```
v_and_b32 v0, 0xff, v1 -> src:v1 sel:BYTE_0
v_and_b32 v2, 0xff, v0 -> src:v0 sel:BYTE_0
v_add_u32 v3, v4, v2
```
In that example it is possible that we would fold 2nd instruction into 3rd (v_add_u32_sdwa) and then try to fold 1st instruction into 2nd (that was already destroyed). So if SDWAOperand is also a potential MI then do not apply it.
Reviewers: vpykhtin, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D32804
llvm-svn: 303347
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
The previous commit failed on test-suite/Bitcode/simd_ops/AArch64_halide_runtime.bc
because isImmOperandEqual() assumed MO was a register operand and that's not
always true.
llvm-svn: 303341
According to Intel's Optimization Reference Manual for SNB+:
" For LEA instructions with three source operands and some specific situations, instruction latency has increased to 3 cycles, and must
dispatch via port 1:
- LEA that has all three source operands: base, index, and offset
- LEA that uses base and index registers where the base is EBP, RBP,or R13
- LEA that uses RIP relative addressing mode
- LEA that uses 16-bit addressing mode "
This patch currently handles the first 2 cases only.
Differential Revision: https://reviews.llvm.org/D32277
llvm-svn: 303333
The probability of edge coming to unreachable block should be as low as possible.
The change reduces the probability to minimal value greater than zero.
The bug https://bugs.llvm.org/show_bug.cgi?id=32214 show the example when
the probability of edge coming to unreachable block is greater than for edge
coming to out of the loop and it causes incorrect loop rotation.
Please note that with this change the behavior of unreachable heuristic is a bit different
than others. Specifically, before this change the sum of probabilities
coming to unreachable blocks have the same weight for all branches
(it was just split over all edges of this block coming to unreachable blocks).
With this change it might be slightly different but not to much due to probability of
taken branch to unreachable block is really small.
Reviewers: chandlerc, sanjoy, vsk, congh, junbuml, davidxl, dexonsmith
Reviewed By: chandlerc, dexonsmith
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D30633
llvm-svn: 303327
compatible target triple
Currently, an assertion fails in ThinLTOCodeGenerator::addModule when
the target triple of the module being added doesn't match that of the
one stored in TMBuilder. This patch relaxes the constraint and makes
changes to allow target triples that only differ in their version
numbers on Apple platforms, similarly to what r228999 did.
rdar://problem/30133904
Differential Revision: https://reviews.llvm.org/D33291
llvm-svn: 303326
The missing optimization for xor-of-icmps still needs to be added, but by
being more efficient (not generating unnecessary logic ops with constants)
we avoid the bug.
See discussion in post-commit comments:
https://reviews.llvm.org/D32143
llvm-svn: 303312
Partially implement callee-side for arguments and return values.
byval doesn't work properly, and most likely sret or other on-stack
return values most as well.
llvm-svn: 303308
When legalizing vector operations on vNi128, they will be split to v1i128
because that is a legal type on ppc64, but then the compiler will crash in
selection dag because it fails to select for these operations. This patch fixes
shift operations. Logical shift right and left shift can be performed in the
vector unit, but algebraic shift right requires being split.
Differential Revision: https://reviews.llvm.org/D32774
llvm-svn: 303307
- '-verify-mahcineinstrs' starts to complain allocatable live-in physical
registers on non-entry or non-landing-pad basic blocks.
- Refactor the XBEGIN translation to define EAX on a dedicated fallback code
path due to XABORT. Add a pseudo instruction to define EAX explicitly to
avoid add physical register live-in.
Differential Revision: https://reviews.llvm.org/D33168
llvm-svn: 303306
We already handled all of the new tests identically, but several
of those went through a lot of unnecessary processing before
getting folded.
Another motivation for grouping these cases together is that
InstCombine needs a similar fold. Currently, it handles the
'not' cases inefficiently which can lead to bugs as described
in the post-commit comments of:
https://reviews.llvm.org/D32143
llvm-svn: 303295
Summary: Moving LiveRangeShrink to x86 as this pass is mostly useful for archtectures with great register pressure.
Reviewers: MatzeB, qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, jyknight, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33294
llvm-svn: 303292
Avoids instructions to pack a vector when the source is really
a scalar being broadcast.
Also be smarter and look for per-component fneg.
Doesn't yet handle scalar from upper half of register
or other swizzles.
llvm-svn: 303291
There should be a slight efficiency improvement from handling icmp/fcmp with one matcher and reducing duplicated code.
The larger motivation is that there are questions about how predicate canonicalization is handled, and the refactoring
should make it easier if we want to change any of that behavior.
1. As noted in the code comment, we've chosen 3 of the 16 FCMP preds as not canonical. Why those 3? It goes back to
rL32751 from what I can tell, but I'm not sure if there's a justification for that rule.
2. We currently do not canonicalize integer select conditions. Should we use the same rule that applies to branches
for selects?
3. We currently do canonicalize some FP select conditions, and those rules would conflict with the rule shown here.
Should one or both be changed?
No-functional-change-intended, but adding tests anyway because there's no coverage for most of the predicates.
Differential Revision: https://reviews.llvm.org/D33247
llvm-svn: 303261
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
llvm-svn: 303259
The variables MinGPR/MinG8R were not updated properly when resetting the
offsets, which in the included testcase lead to saving the CR register
in the same location as R30.
This fixes another issue reported in PR26519.
Differential Revision: https://reviews.llvm.org/D33017
llvm-svn: 303257
Summary:
Without this, it's possible to encounter multiple defs for a register.
This is triggered by the current version of D32868 when applied to trunk.
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls
Reviewed By: qcolombet
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32869
llvm-svn: 303253
When looping through a destination pattern's operands to decide how many
default operands we need to introduce, we used to count the "expanded"
number of operands. So if one default operand would be rendered as 2
values, we'd count it as 2 operands, when in fact it needs to count as
only 1 operand regardless of how many values it expands to.
This turns out to be a problem only in some very specific cases, e.g.
when we have one operand with multiple default values followed by more
operands with default values (see the new test). In such a situation
we'd stop looping before looking at all the operands, and then error out
assuming that we don't have enough default operands to make up the
shortfall.
At the moment this only affects ARM.
The patch removes the loop counting default operands entirely and
assumes that we'll have to introduce values for any default operand that
we find (i.e. we're assuming it cannot be given as a child at all). It
also extracts the code for adding renderers for default operands into a
helper method.
Differential Revision: https://reviews.llvm.org/D33031
llvm-svn: 303240
Summary:
Debug info sections, (or non-SHF_ALLOC sections in general) should be
linked as if their load address was zero to emulate the behavior of the
static linker.
This bug was discovered because it was breaking lldb expression evaluation on
linux.
Reviewers: lhames
Subscribers: aprantl, eugene, clayborg, lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D32899
llvm-svn: 303239
If we need to spill the result of the PHI instruction, we insert the spill after
all of the PHIs and EHPads, however, in a catchswitch block there is no
room to insert the spill. Make room by splitting away catchswitch into a separate
block.
Before the fix:
catch.dispatch:
%val = phi i32 [ 1, %if.then ], [ 2, %if.else ]
%switch = catchswitch within none [label %catch] unwind label %cleanuppad
After:
catch.dispatch:
%val = phi i32 [ 1, %if.then ], [ 2, %if.else ]
%tok = cleanuppad within none []
; spill goes here
cleanupret from %tok unwind label %catch.dispatch.switch
catch.dispatch.switch:
%switch = catchswitch within none [label %catch] unwind label %cleanuppad
https://reviews.llvm.org/D31846
llvm-svn: 303232
We would eventually catch these via demanded bits and computing known bits in InstCombine,
but I think it's better to handle the simple cases as soon as possible as a matter of efficiency.
This fold allows further simplifications based on distributed ops transforms. eg:
%a = lshr i8 %x, 7
%b = or i8 %a, 2
%c = and i8 %b, 1
InstSimplify can directly fold this now:
%a = lshr i8 %x, 7
Differential Revision: https://reviews.llvm.org/D33221
llvm-svn: 303213
Update threshold based on callee's hotness only when BFI is not available.
Otherwise use only callsite's hotness. This makes it easier to reason about
hotness related threshold updates.
Differential revision: https://reviews.llvm.org/D33157
llvm-svn: 303210
Summary:
This fixes pr32392.
The lowering pipeline is:
llvm.ppc.cfence in IR -> PPC::CFENCE8 in isel -> Actual instructions in
expandPostRAPseudo.
The reason why expandPostRAPseudo is chosen is because previous passes
are likely eliminating instructions like cmpw 3, 3 (early CSE) and bne-
7, .+4 (some branch pass(s)).
Differential Revision: https://reviews.llvm.org/D32763
llvm-svn: 303205
Summary:
In SelectionDAG, when a store is immediately chained to another store
to the same address, elide the first store as it has no observable
effects. This is causes small improvements dealing with intrinsics
lowered to stores.
Test notes:
* Many testcases overwrite store addresses multiple times and needed
minor changes, mainly making stores volatile to prevent the
optimization from optimizing the test away.
* Many X86 test cases optimized out instructions associated with
associated with va_start.
* Note that test_splat in CodeGen/AArch64/misched-stp.ll no longer has
dependencies to check and can probably be removed and potentially
replaced with another test.
Reviewers: rnk, john.brawn
Subscribers: aemerson, rengolin, qcolombet, jyknight, nemanjai, nhaehnle, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33206
llvm-svn: 303198
The referenced tests are derived from:
https://bugs.llvm.org/show_bug.cgi?id=32791
and:
https://reviews.llvm.org/D33172
The motivation for including negative tests may not be clear, so I'm adding an explanatory comment here.
In the post-commit thread for r303133:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20170515/453793.html
...it was mentioned that we don't want to add redundant tests. This is a valid point. But in this case,
we have a patch under review (D33172) that demonstrates that no existing regression tests are affected by
a proposed code change, but these are. Therefore, I think these tests have value not visible in any
existing regression tests regardless of whether they show a transform.
Differential Revision: https://reviews.llvm.org/D33242
llvm-svn: 303185
According to Intel's Optimization Reference Manual for SNB+:
" For LEA instructions with three source operands and some specific situations, instruction latency has increased to 3 cycles, and must
dispatch via port 1:
- LEA that has all three source operands: base, index, and offset
- LEA that uses base and index registers where the base is EBP, RBP,or R13
- LEA that uses RIP relative addressing mode
- LEA that uses 16-bit addressing mode "
This patch currently handles the first 2 cases only.
Differential Revision: https://reviews.llvm.org/D32277
llvm-svn: 303183
Summary:
RewritePHIs algorithm used in building of CoroFrame inserts a placeholder
```
%placeholder = phi [%val]
```
on every edge leading to a block starting with PHI node with multiple incoming edges,
so that if one of the incoming values was spilled and need to be reloaded, we have a
place to insert a reload. We use SplitEdge helper function to split the incoming edge.
SplitEdge function does not deal with unwind edges comping into a block with an EHPad.
This patch adds an ehAwareSplitEdge function that can correctly split the unwind edge.
For landing pads, we clone the landing pad into every edge block and replace the original
landing pad with a PHI collection the values from all incoming landing pads.
For WinEH pads, we keep the original EHPad in place and insert cleanuppad/cleapret in the
edge blocks.
Reviewers: majnemer, rnk
Reviewed By: majnemer
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D31845
llvm-svn: 303172
The existing sorting order in defined CompareSCEVComplexity sorts AddRecExprs
by loop depth, but does not pay attention to dominance of loops. This can
lead us to the following buggy situation:
for (...) { // loop1
op1 = {A,+,B}
}
for (...) { // loop2
op2 = {A,+,B}
S = add op1, op2
}
In this case there is no guarantee that in operand list of S the op2 comes
before op1 (loop depth is the same, so they will be sorted just
lexicographically), so we can incorrectly treat S as a recurrence of loop1,
which is wrong.
This patch changes the sorting logic so that it places the dominated recs
before the dominating recs. This ensures that when we pick the first recurrency
in the operands order, it will be the bottom-most in terms of domination tree.
The attached test set includes some tests that produce incorrect SCEV
estimations and crashes with oldlogic.
Reviewers: sanjoy, reames, apilipenko, anna
Reviewed By: sanjoy
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33121
llvm-svn: 303148
Shrink-wrapping uses post-dominators to find a restore point that
post-dominates all the uses of CSR / stack.
The way dominator trees are modeled in LLVM today is that unreachable
blocks are not present in a generic dominator tree, so, an unreachable node is
dominated by anything: include/llvm/Support/GenericDomTree.h:467.
Since for post-dominators, a no-return block is considered
"unreachable", calling findNearestCommonDominator on an unreachable node
A and a non-unreachable node B, will return B, which can be false. If we
find such node, we bail out since there is no good restore point
available.
rdar://problem/30186931
llvm-svn: 303130
We don't use section-relative relocations on AArch64, so all symbols must be at
least visible to the linker (i.e. properly global or l_whatever, but not
L_whatever).
llvm-svn: 303118
There's no need (& a bit incorrect) to mask off the high bits of the
register reference when describing a simple bool value.
Reviewers: aprantl
Differential Revision: https://reviews.llvm.org/D31062
llvm-svn: 303117
ARM Neon has native support for half-sized vector registers (64 bits). This
is beneficial for example for 2D and 3D graphics. This patch adds the option
to lower MinVecRegSize from 128 via a TTI in the SLP Vectorizer.
*** Performance Analysis
This change was motivated by some internal benchmarks but it is also
beneficial on SPEC and the LLVM testsuite.
The results are with -O3 and PGO. A negative percentage is an improvement.
The testsuite was run with a sample size of 4.
** SPEC
* CFP2006/482.sphinx3 -3.34%
A pretty hot loop is SLP vectorized resulting in nice instruction reduction.
This used to be a +22% regression before rL299482.
* CFP2000/177.mesa -3.34%
* CINT2000/256.bzip2 +6.97%
My current plan is to extend the fix in rL299482 to i16 which brings the
regression down to +2.5%. There are also other problems with the codegen in
this loop so there is further room for improvement.
** LLVM testsuite
* SingleSource/Benchmarks/Misc/ReedSolomon -10.75%
There are multiple small SLP vectorizations outside the hot code. It's a bit
surprising that it adds up to 10%. Some of this may be code-layout noise.
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer -8.40%
The opt-viewer screenshot can be seen at F3218284. We start at a colder store
but the tree leads us into the hottest loop.
* MultiSource/Applications/lambda-0.1.3/lambda -2.68%
* MultiSource/Benchmarks/Bullet/bullet -2.18%
This is using 3D vectors.
* SingleSource/Benchmarks/Shootout-C++/Shootout-C++-lists +6.67%
Noise, binary is unchanged.
* MultiSource/Benchmarks/Ptrdist/anagram/anagram +4.90%
There is an additional SLP in the cold code. The test runs for ~1sec and
prints out over 2000 lines. This is most likely noise.
* MultiSource/Applications/aha/aha +1.63%
* MultiSource/Applications/JM/lencod/lencod +1.41%
* SingleSource/Benchmarks/Misc/richards_benchmark +1.15%
Differential Revision: https://reviews.llvm.org/D31965
llvm-svn: 303116
This caused PR33053.
Original commit message:
> The new experimental reduction intrinsics can now be used, so I'm enabling this
> for AArch64. We will need this for SVE anyway, so it makes sense to do this for
> NEON reductions as well.
>
> The existing code to match shufflevector patterns are replaced with a direct
> lowering of the reductions to AArch64-specific nodes. Tests updated with the
> new, simpler, representation.
>
> Differential Revision: https://reviews.llvm.org/D32247
llvm-svn: 303115
We were silently ignoring any features we couldn't match up, which led to
errors in an inline asm block missing the conventional "\n\t".
llvm-svn: 303108
Summary:
The following loops should be recognized:
i = 0;
while (n) {
n = n >> 1;
i++;
body();
}
use(i);
And replaced with builtin_ctlz(n) if body() is empty or
for CPUs that have CTLZ instruction converted to countable:
for (j = 0; j < builtin_ctlz(n); j++) {
n = n >> 1;
i++;
body();
}
use(builtin_ctlz(n));
Reviewers: rengolin, joerg
Differential Revision: http://reviews.llvm.org/D32605
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 303102
verifyMemoryCongruency() filters out trivially dead MemoryDef(s),
as we find them immediately dead, before moving from TOP to a new
congruence class.
This fixes the same problem for PHI(s) skipping MemoryPhis if all
the operands are dead.
Differential Revision: https://reviews.llvm.org/D33044
llvm-svn: 303100
Summary:
All GlobalIndirectSymbol types (not just GlobalAlias) should return
their base object.
Without this patch LTO would warn "Unable to determine comdat of
alias!" for an ifunc.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D33202
llvm-svn: 303096
At O3 we are more willing to increase size if we believe it will improve
performance. The current threshold for tail-duplication of 2 instructions is
conservative, and can be relaxed at O3.
Benchmark results:
llvm test-suite:
6% improvement in aha, due to duplication of loop latch
3% improvement in hexxagon
2% slowdown in lpbench. Seems related, but couldn't completely diagnose.
Internal google benchmark:
Produces 4% improvement on internal google protocol buffer serialization
benchmarks.
Differential-Revision: https://reviews.llvm.org/D32324
llvm-svn: 303084
Follow up to D33147
NVPTXTargetLowering::LowerCall was trusting the default argument values.
Fixes another 17 of the NVPTX '-verify-machineinstrs with EXPENSIVE_CHECKS' errors in PR32146.
Differential Revision: https://reviews.llvm.org/D33189
llvm-svn: 303082
This patch enables fusing dependent AESE/AESMC and AESD/AESIMC
instruction pairs on Cortex-A72, as recommended in the Software
Optimization Guide, section 4.10.
llvm-svn: 303073
Doing this means that if an LEApcrel is used in two places we will rematerialize
instead of generating two MOVs. This is particularly useful for printfs using
the same format string, where we want to generate an address into a register
that's going to get corrupted by the call.
Differential Revision: https://reviews.llvm.org/D32858
llvm-svn: 303054
Doing this lets us hoist it out of loops, and I've also marked it as
rematerializable the same as the thumb1 and thumb2 counterparts.
It looks like it being marked as such was just a mistake, as the commit that
made that change only mentions LEApcrelJT and in thumb1 and thumb2 only the
LEApcrelJT instructions were marked as having side-effects, so it looks like
the intent was to only mark LEApcrelJT as having side-effects but LEApcrel was
accidentally marked as such also.
Differential Revision: https://reviews.llvm.org/D32857
llvm-svn: 303053
Currently, when masked load, store, gather or scatter intrinsics are used, we check in CodeGenPrepare pass if the subtarget support these intrinsics, if not we replace them with scalar code - this is a functional transformation not an optimization (not optional).
CodeGenPrepare pass does not run when the optimization level is set to CodeGenOpt::None (-O0).
Functional transformation should run with all optimization levels, so here I created a new pass which runs on all optimization levels and does no more than this transformation.
Differential Revision: https://reviews.llvm.org/D32487
llvm-svn: 303050
We were previously silently emitting bogus data in release mode,
making it very hard to diagnose the error, or crashing with an
assert in debug mode. A proper diagnostic is now always emitted
when the value to be emitted is out of range.
llvm-svn: 303041
I noticed the 512-bit lzcnts don't use the X86 specific lookup table code and instead use the EXPAND case in LegalizeDAG. I was toying around with fixing this and noticed it would require compare instructions that generate i1 masks and then converting from mask to vector. Then I noticed that we don't test which compares are used with avx512vl and no avx512cd.
llvm-svn: 303020
Remove an unneeded prefix from the 32-bit command line. Make all the 64-bit triples match. Replace ALL with X64 and remove it from the 32-bit test.
llvm-svn: 303019
Running `llvm-readobj -coff-directives msvcrt.lib` resulted in this error:
Invalid data was encountered while parsing the file
This happened because some of the object files in the archive have empty
`.drectve` sections. These empty sections result in a `parse_failed` error being
returned from `COFFObjectFile::getSectionContents()`, which in turn caused
`llvm-readobj` to stop. With this change, `getSectionContents` now returns
success, and like before the resulting array is empty.
Patch by Dave Lee.
Differential Revision: https://reviews.llvm.org/D32652
llvm-svn: 303014
Summary:
If the Worklist build causes an IR change this change flag currently factors into the flag for running another iteration of the iteration loop. But only changes during processing should trigger another loop.
This patch captures the worklist creation change flag into the outside the loop flag currently used for DbgDeclares and only sends that flag up to the caller. Rerunning the loop only depends on IC.run() now.
This uses the debug output of InstCombine to determine if one or two iterations run. I couldn't think of a better way to detect it since the second spurious iteration shoudn't make any visible changes. Just wasted computation.
I can do a pre-commit of the test case with the CHECK-NOT as a CHECK if this is an ok way to check this.
This is a subset of D31678 as I'm still not sure how to verify the analysis behavior for that.
Reviewers: davide, majnemer, spatel, chandlerc
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32453
llvm-svn: 302982
Tests with target intrinsics are inherently target specific, so it
doesn't actually make sense to run them if we've excluded their
target.
llvm-svn: 302979
I bet the change is correct but this test seems to expose some underlying
problem that manifest only on some buildbots, and I'm not able to reproduce
locally. Unfortunately I can't debug right now but I don't want to annoy
people with spurious failures, so I'll XFAIL until I can take a look (over
the weekend).
llvm-svn: 302976
Update a few tests to use llvm.masked.load/store instead of arm neon
vector loads and stores, and move the tests that are actually specific
to those arm intrinsics to their own files. This lets us mark the
tests that use target specific intrinsics as requiring those targets.
llvm-svn: 302972
Implemented frequency based cost/saving analysis
and related options.
The pass is now in a state ready to be turne on
in the pipeline (in follow up).
Differential Revision: http://reviews.llvm.org/D32783
llvm-svn: 302967
Summary:
We should not change volatile loads/stores in promoting alloca to vector.
Reviewers:
arsenm
Differential Revision:
http://reviews.llvm.org/D33107
llvm-svn: 302943
This fixes 47 of the 75 NVPTX '-verify-machineinstrs with EXPENSIVE_CHECKS' errors in PR32146.
Differential Revision: https://reviews.llvm.org/D33147
llvm-svn: 302942
Summary: LiveRangeShrink pass moves instruction right after the definition with the same BB if the instruction and its operands all have more than one use. This pass is inexpensive and guarantees optimal live-range within BB.
Reviewers: davidxl, wmi, hfinkel, MatzeB, andreadb
Reviewed By: MatzeB, andreadb
Subscribers: hiraditya, jyknight, sanjoy, skatkov, gberry, jholewinski, qcolombet, javed.absar, krytarowski, atrick, spatel, RKSimon, andreadb, MatzeB, mehdi_amini, mgorny, efriedma, davide, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32563
llvm-svn: 302938
CodeViewDebug sets Asm to nullptr to disable debug info generation. You
can get a .ll file like no-cus.ll from 'clang -gcodeview -g0', which
happens in the ubsan test suite.
llvm-svn: 302923
This code was missing a check for stores, so we were thinking the
congruency class didn't have any memory members, and reset the
memory leader.
Differential Revision: https://reviews.llvm.org/D33056
llvm-svn: 302905
This is a follow up patch for https://reviews.llvm.org/rL300440
to address a comment.
To make implementation to be consistent with other cases we just
ignore the remainder after distribution of remaining probability between
reachable edges.
If we reduced the probability of some edges coming to unreachable
blocks we should distribute the remaining part across other edges
coming to reachable blocks to satisfy the condition that sum of all
probabilities should be equal to one. If this remaining part is not
divided by number of "reachable" edges then we get this remainder.
This remainder probability should be pretty small. Other cases just ignore
if the sum of probabilities is not equal to one so we do the same.
Reviewers: chandlerc, sanjoy, vsk, junbuml, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D32124
llvm-svn: 302883
Llvm-stress discovered that a COPY may end up in ExpandPostRA::LowerCopy()
with an undef source operand. It is not possible for the target to handle
this, as this flag is not passed to TII->copyPhysReg().
This patch solves this by treating such a COPY as an identity COPY.
Review: Matthias Braun
https://reviews.llvm.org/D32892
llvm-svn: 302877
Summary:
Instead of using RemoveExtraEdges (which uses analyzeBranch, which cannot
always be trusted) at the end to fixup the CFG we keep the CFG updated as
we go along and remove or add branches and merge blocks.
This way we won't have any problems if the involved MBBs contain
unanalyzable instructions.
This fixes PR32721.
In that case we had a triangle
EBB
| \
| |
| TBB
| /
FBB
where FBB didn't have any successors at all since it ended with an
unconditional return. Then TBB and FBB were be merged into EBB, but EBB
would still keep its successors, and the use of analyzeBranch and
CorrectExtraCFGEdges wouldn't help to remove them since the return
instruction is not analyzable (at least not on ARM).
Reviewers: kparzysz, iteratee, MatzeB
Reviewed By: iteratee
Subscribers: aemerson, rengolin, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33037
llvm-svn: 302876
invariant PHI inputs and to rewrite PHI nodes during the actual
unswitching.
The checking is quite easy, but rewriting the PHI nodes is somewhat
surprisingly challenging. This should handle both branches and switches.
I think this is now a full featured trivial unswitcher, and more full
featured than the trivial cases in the old pass while still being (IMO)
somewhat simpler in how it works.
Next up is to verify its correctness in more widespread testing, and
then to add non-trivial unswitching.
Thanks to Davide and Sanjoy for the excellent review. There is one
remaining question that I may address in a follow-up patch (see the
review thread for details) but it isn't related to the functionality
specifically.
Differential Revision: https://reviews.llvm.org/D32699
llvm-svn: 302867
Turns out that the Fission/Split DWARF package format (DWP) is currently
insufficient to handle cross-CU (ref_addr) references. So for now,
duplicate any debug info needed in these situations:
* inlined_subroutine's abstract_origin
* inlined variable's abstract_origin
* types
Keep the ref_addr behavior in general, including in the split DWARF
inline debug info that can be emitted into the object files for online
symbolication.
Keep a flag to use the old (ref_addr) behavior for testing ways of
addressing this limitation in the DWP tool (& for those not using DWP
packaging).
llvm-svn: 302858
Summary: This patch changes the function profile output order to be deterministic. In order to make it easier to understand, hottest functions (with most total samples) is ordered first.
Reviewers: dnovillo, davidxl
Reviewed By: dnovillo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33111
llvm-svn: 302851
Summary:
Don't use the metadata on call instructions for determining hotness
unless we are in sample PGO mode, where it is needed because profile
counts are not accurate. In instrumentation mode this is not necessary
and does more harm than good when calls have VP metadata that hasn't
been properly scaled after transformations or dropped after constant
prop based devirtualization (both should be fixed, but we don't need
to do this in the first place for instrumentation PGO).
This required adjusting a number of tests to distinguish between sample
and instrumentation PGO handling, and to add in profile summary metadata
so that getProfileCount can get the summary.
Reviewers: davidxl, danielcdh
Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D32877
llvm-svn: 302844
According to Power ISA V3.0 document, the first source operand of mtvsrdd is constant 0 if r0 is specified. So the corresponding register constraint should be g8rc_nox0.
This bug caused wrong output generated by 401.bzip2 when -mcpu=power9 and fdo are specified.
Differential Revision: https://reviews.llvm.org/D32880
llvm-svn: 302834
I ran the test-suite (including SPEC 2006) in PGO mode comparing cold
thresholds of 225 and 45. Here are some stats on the text size:
Out of 904 tests that ran, 197 see a change in text size. The average
text size reduction (of all the 904 binaries) is 1.07%. Of the 197
binaries, 19 see a text size increase, as high as 18%, but most of them
are small single source benchmarks. There are 3 multisource benchmarks
with a >0.5% size increase (0.7, 1.3 and 2.1 are their % increases). On
the other side of the spectrum, 31 benchmarks see >10% size reduction
and 6 of them are MultiSource.
I haven't run the test-suite with other values of inlinecold-threshold.
Since we have a cold callsite threshold of 45, I picked this value.
Differential revision: https://reviews.llvm.org/D33106
llvm-svn: 302829
Updates the MSP430 target to generate EABI-compatible libcall names.
As a byproduct, adjusts the hardware multiplier options available in
the MSP430 target, adds support for promotion of the ISD::MUL operation
for 8-bit integers, and correctly marks R11 as used by call instructions.
Patch by Andrew Wygle.
Differential Revision: https://reviews.llvm.org/D32676
llvm-svn: 302820
We don't use it and it was removed in gfx9, and the encoding
bit repurposed.
Additionally actually using it requires changing the output register
class, which wasn't done anyway.
llvm-svn: 302814
The approach I followed was to emit the remark after getTreeCost concludes
that SLP is profitable. I initially tried emitting them after the
vectorizeRootInstruction calls in vectorizeChainsInBlock but I vaguely
remember missing a few cases for example in HorizontalReduction::tryToReduce.
ORE is placed in BoUpSLP so that it's available from everywhere (notably
HorizontalReduction::tryToReduce).
We use the first instruction in the root bundle as the locator for the remark.
In order to get a sense how far the tree is spanning I've include the size of
the tree in the remark. This is not perfect of course but it gives you at
least a rough idea about the tree. Then you can follow up with -view-slp-tree
to really see the actual tree.
llvm-svn: 302811
This patch is the first in a series of patches to provide code gen for
doing compares in GPRs when the compare result is required in a GPR.
It adds the infrastructure to select GPR sequences for i1->i32 and i1->i64
extensions. This first patch handles equality comparison on i32 operands with
the result sign or zero extended.
Differential Revision: https://reviews.llvm.org/D31847
llvm-svn: 302810
This patch extends llvm-ir to allow attributes to be set on global variables.
An RFC was sent out earlier by my colleague James Molloy: http://lists.llvm.org/pipermail/cfe-dev/2017-March/053100.html
A key part of that proposal was to extend LLVM-IR to carry attributes on global variables.
This generic feature could be useful for multiple purposes.
In our present context, it would be useful to carry user specified sections for bss/rodata/data.
Reviewed by: Jonathan Roelofs, Reid Kleckner
Differential Revision: https://reviews.llvm.org/D32009
llvm-svn: 302794
It turned out that MSan was incorrectly calculating the shadow for int comparisons: it was done by truncating the result of (Shadow1 OR Shadow2) to i1, effectively rendering all bits except LSB useless.
This approach doesn't work e.g. in the case where the values being compared are even (i.e. have the LSB of the shadow equal to zero).
Instead, if CreateShadowCast() has to cast a bigger int to i1, we replace the truncation with an ICMP to 0.
This patch doesn't affect the code generated for SPEC 2006 binaries, i.e. there's no performance impact.
For the test case reported in PR32842 MSan with the patch generates a slightly more efficient code:
orq %rcx, %rax
jne .LBB0_6
, instead of:
orl %ecx, %eax
testb $1, %al
jne .LBB0_6
llvm-svn: 302787
manages to form a VSELECT with a non-i1 element type condition. Those
are technically allowed in SDAG (at least, the generic type legalization
logic will form them and I wouldn't want to try to audit everything te
preclude forming them) so we need to be able to lower them.
This isn't too hard to implement. We mark VSELECT as custom so we get
a chance in C++, add a fast path for i1 conditions to get directly
handled by the patterns, and a fallback when we need to manually force
the condition to be an i1 that uses the vptestm instruction to turn
a non-mask into a mask.
This, unsurprisingly, generates awful code. But it at least doesn't
crash. This was actually impacting open source packages built with LLVM
for AVX-512 in the wild, so quickly landing a patch that at least stops
the immediate bleeding.
I think I've found where to fix the codegen quality issue, but less
confident of that change so separating it out from the thing that
doesn't change the result of any existing test case but causes mine to
not crash.
llvm-svn: 302785
This is the same as r292827 for AArch64: we widen 8- and 16-bit ADD, SUB
and MUL to 32 bits since we only have TableGen patterns for 32 bits.
See the commit message for r292827 for more details.
At this point we could just remove some of the tests for regbankselect
and instruction-select, since we're not going to see any narrow
operations at those levels anymore. Instead I decided to update them
with G_ANYEXT/G_TRUNC operations, so we can validate the full sequences
generated by the legalizer.
llvm-svn: 302782
G_ANYEXT can be introduced by the legalizer when widening scalars. Add
support for it in the register bank info (same mapping as everything
else) and in the instruction selector.
When selecting it, we treat it as a COPY, just like G_TRUNC. On this
occasion we get rid of some assertions in selectCopy so we can reuse it.
This shouldn't be a problem at the moment since we're not supporting any
complicated cases (e.g. FPR, different register banks). We might want to
separate the paths when we do.
llvm-svn: 302778
This reverts r302712.
The change fails with ASAN enabled:
ERROR: AddressSanitizer: use-after-poison on address ... at ...
READ of size 2 at ... thread T0
#0 ... in llvm::SDNode::getNumValues() const <snip>/include/llvm/CodeGen/SelectionDAGNodes.h:855:42
#1 ... in llvm::SDNode::hasAnyUseOfValue(unsigned int) const <snip>/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:7270:3
#2 ... in llvm::SDValue::use_empty() const <snip> include/llvm/CodeGen/SelectionDAGNodes.h:1042:17
#3 ... in (anonymous namespace)::DAGCombiner::MergeConsecutiveStores(llvm::StoreSDNode*) <snip>/lib/CodeGen/SelectionDAG/DAGCombiner.cpp:12944:7
Reviewers: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33081
llvm-svn: 302746
// (X ^ C1) | C2 --> (X | C2) ^ (C1&~C2)
This canonicalization was added at:
https://reviews.llvm.org/rL7264
By moving xors out/down, we can more easily combine constants. I'm adding
tests that do not change with this patch, so we can verify that those kinds
of transforms are still happening.
This is no-functional-change-intended because there's a later fold:
// (X^C)|Y -> (X|Y)^C iff Y&C == 0
...and demanded-bits appears to guarantee that any fold that would have
hit the fold we're removing here would be caught by that 2nd fold.
Similar reasoning was used in:
https://reviews.llvm.org/rL299384
The larger motivation for removing this code is that it could interfere with
the fix for PR32706:
https://bugs.llvm.org/show_bug.cgi?id=32706
Ie, we're not checking if the 'xor' is actually a 'not', so we could reverse
a 'not' optimization and cause an infinite loop by altering an 'xor X, -1'.
Differential Revision: https://reviews.llvm.org/D33050
llvm-svn: 302733
Summary:
Allow consecutive stores whose values come from consecutive loads to
merged in the presense of other uses of the loads. Previously this was
disallowed as in general the merged load cannot be shared with the
other uses. Merging N stores into 1 may cause as many as N redundant
loads. However in the context of caching this should have neglible
affect on memory pressure and reduce instruction count making it
almost always a win.
Fixes PR32086.
Reviewers: spatel, jyknight, andreadb, hfinkel, efriedma
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30471
llvm-svn: 302712
For stores, check if the stored value is defined by a floating point
instruction and if yes, we return a default mapping with FPR instead
of GPR.
llvm-svn: 302679
The new experimental reduction intrinsics can now be used, so I'm enabling this
for AArch64. We will need this for SVE anyway, so it makes sense to do this for
NEON reductions as well.
The existing code to match shufflevector patterns are replaced with a direct
lowering of the reductions to AArch64-specific nodes. Tests updated with the
new, simpler, representation.
Differential Revision: https://reviews.llvm.org/D32247
llvm-svn: 302678
The first test in this file is duplicated exactly in and.ll -> test33.
We have commuted and vector variants there too.
The second test is a composite of 2 folds. The first fold is tested
independently in add.ll -> flip_and_mask (including vector variant).
After that transform fires, the IR is identical to the first transform.
llvm-svn: 302676
The script at utils/update_test_checks.py has (had?) a bug when variables
start with the same sequence of letters (clearly, not all of the time).
llvm-svn: 302674
This adds a few missing instructions for the assembler and
disassembler. Those should be the last missing general-
purpose (Chapter 7) instructions for the z10 ISA.
llvm-svn: 302667
This adds the remaining general arithmetic instructions
for assembler / disassembler use. Most of these are not
useful for codegen; a few might be, and those are listed
in the README.txt for future improvements.
llvm-svn: 302665
The previous code was discarding the error message from
createBinary() by calling errorToErrorCode().
This meant that such error were always reported unhelpfully
as "Invalid data was encountered while parsing the file".
Other tools such as llvm-objdump already produce a more
the error message in this case.
Differential Revision: https://reviews.llvm.org/D32985
llvm-svn: 302664
This is another step towards favoring 'not' ops over random 'xor' in IR:
https://bugs.llvm.org/show_bug.cgi?id=32706
This transformation may have occurred in longer IR sequences using computeKnownBits,
but that could be much more expensive to calculate.
As the scalar result shows, we do not currently favor 'not' in all cases. The 'not'
created by the transform is transformed again (unnecessarily). Vectors don't have
this problem because vectors are (wrongly) excluded from several other combines.
llvm-svn: 302659
This patch is the fourth patch in a series of reviews for the Altmacro feature.
This patch introduces a new escape character '!' and it depends on D32701.
according to https://sourceware.org/binutils/docs/as/Altmacro.html:
"single-character string escape
To include any single character literally in a string (even if the character would otherwise have some special meaning), you can prefix the character with !' (an exclamation mark). For example, you can write <4.3 !> 5.4!!>' to get the literal text `4.3 > 5.4!'. "
Differential Revision: https://reviews.llvm.org/D32792
llvm-svn: 302652
Summary:
When trying to figure out if MBB could fallthrough to ToMBB (possibly by
falling through a bunch of other MBBs) we didn't actually check if there
was fallthrough between the last two blocks in the chain.
Reviewers: kparzysz, iteratee, MatzeB
Reviewed By: kparzysz, iteratee
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D32996
llvm-svn: 302650
This method must return a valid register class, or the list-ilp isel
scheduler will crash. For MVT::Untyped nullptr was previously returned, but
now ADDR128BitRegClass is returned instead. This is needed just as long as
list-ilp (and probably also list-hybrid) is still there.
Review: Ulrich Weigand, A Trick
https://reviews.llvm.org/D32802
llvm-svn: 302649
The assembler and disassmebler test cases started out formatted and
sorted in a particular way, but this got lost over time as patches
were added. Reformat them again. NFC.
llvm-svn: 302642
This pass doesn't correctly handle testing for when it is legal to hoist
arbitrary instructions. The whitelist happens to make it safe, so before
it is removed the pass's legality checks will need to be enhanced.
Details have been added to the code review thread for the patch.
llvm-svn: 302640
This pass uses a new target hook to decide whether or not to expand a particular
intrinsic to the shuffevector sequence.
Differential Revision: https://reviews.llvm.org/D32245
llvm-svn: 302631
This is a follow-up to r302611, which moved an -O0 computation of DT
from SDAGISel to TwoAddress.
Don't use it here either, and avoid computing it completely. The only
use was forwarding the analysis as an optional argument to utility
functions.
Differential Revision: https://reviews.llvm.org/D32766
llvm-svn: 302612
Before r247167, the pass manager builder controlled which AA
implementations were used, exporting them all in the AliasAnalysis
analysis group.
Now, AAResultsWrapperPass always uses BasicAA, but still uses other AA
implementations if made available in the pass pipeline.
But regardless, SDAGISel is required at O0, and really doesn't need to
be doing fancy optimizations based on useful AA results.
Don't require AA at CodeGenOpt::None, and only use it otherwise.
This does have a functional impact (and one testcase is pessimized
because we can't reuse a load). But I think that's desirable no matter
what.
Note that this alone doesn't result in less DT computations: TwoAddress
was previously able to reuse the DT we computed for SDAG. That will be
fixed separately.
Differential Revision: https://reviews.llvm.org/D32766
llvm-svn: 302611
We currently require SCEV, which requires DT/LI. Those are expensive to
compute, but the pass only runs for functions that have the safestack
attribute.
Compute DT/LI to build SCEV lazily, only when the pass is actually going
to transform the function.
Differential Revision: https://reviews.llvm.org/D31302
llvm-svn: 302610
This should hopefully makes changes to the O0 pipeline obvious; it's
easy to require expensive passes, and this helps make informed
decisions.
Case in point: in the few weeks separating the time when I initially
wrote this patch to the time when I committed, the test regressed as
r302103 added another use of DT!
llvm-svn: 302608
Previously we had only supported the importing and
exporting of functions and globals.
Also, add usefull overload of getWasmSymbol() and
getNumberOfSymbols() in support of lld port.
Differential Revision: https://reviews.llvm.org/D33011
llvm-svn: 302601
Summary:
This fixes the immediate crash caused by introducing an incorrect inttoptr
before attempting the conversion. There may still be a legality
check missing somewhere earlier for non-integral pointers, but this change
seems necessary in any case.
Reviewers: sanjoy, dberlin
Reviewed By: dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32623
llvm-svn: 302587
The AArch64 instruction set has a few "widening" instructions (e.g., uaddl,
saddl, uaddw, etc.) that take one or more doubleword operands and produce
quadword results. The operands are automatically sign- or zero-extended as
appropriate. However, in LLVM IR, these extends are explicit. This patch
updates TTI to consider these widening instructions as single operations whose
cost is attached to the arithmetic instruction. It marks extends that are part
of a widening operation "free" and applies a sub-target specified overhead
(zero by default) to the arithmetic instructions.
Differential Revision: https://reviews.llvm.org/D32706
llvm-svn: 302582
Fixes inalloca parameters, which previously all pointed to the same
offset. Extend the test to use llvm-readobj so that we can test the
offset in a readable way.
llvm-svn: 302578
As recently discussed on llvm-dev [1], this patch makes it illegal for
two Functions to point to the same DISubprogram and updates
FunctionCloner to also clone the debug info of a function to conform
to the new requirement. To simplify the implementation it also factors
out the creation of inlineAt locations from the Inliner into a
general-purpose utility in DILocation.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
<rdar://problem/31926379>
Differential Revision: https://reviews.llvm.org/D32975
This reapplies r302469 with a fix for a bot failure (reparentDebugInfo
now checks for the case the orig and new function are identical).
llvm-svn: 302576
Summary: computeKnownBitsForTargetNode was not defined for Lanai which resulted in additional AND's with 0x1 for the output of SETCC instructions.
Reviewers: eliben, majnemer
Reviewed By: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29605
llvm-svn: 302568
The check for valid start function was inverted. Added a new
test in test/Object to check this case and fixed the existing
tests in for ObjectYAML.
Differential Revision: https://reviews.llvm.org/D32986
llvm-svn: 302560
The way we currently define congruency for two PHIExpression(s) is:
1) The operands to the phi functions are congruent
2) The PHIs are defined in the same BasicBlock.
NewGVN works under the assumption that phi operands are in predecessor
order, or at least in some consistent order. OTOH, is valid IR:
patatino:
%meh = phi i16 [ %0, %winky ], [ %conv1, %tinky ]
%banana = phi i16 [ %0, %tinky ], [ %conv1, %winky ]
br label %end
and the in-memory representations of the two SSA registers have an
inconsistent order. This violation of NewGVN assumptions results into
two PHIs found congruent when they're not. While we think it's useful
to have always a consistent order enforced, let's fix this in NewGVN
sorting uses in predecessor order before creating a PHI expression.
Differential Revision: https://reviews.llvm.org/D32990
llvm-svn: 302552
This patch adds more patterns that a reasonable person might write that can be compiled to BZHI.
This adds support for
(~0U >> (32 - b)) & a;
and
a << (32 - b) >> (32 - b);
This was inspired by the code in APInt::clearUnusedBits.
This can pass an index of 32 to the bzhi instruction which a quick test of Haswell hardware shows will not mask any bits. Though the description text in the Intel manual says the "index is saturated to OperandSize-1". The pseudocode in the same manual indicates no bits will be zeroed for this case.
I think this is still missing cases where the subtract portion is an 8-bit operation.
Differential Revision: https://reviews.llvm.org/D32616
llvm-svn: 302549
The comment says to avoid the case where zero bits are shifted into the truncated value,
but the code checks that the shift is smaller than the truncated value instead of the
number of bits added by the sign extension. Fixing this allows a shift by more than the
value size to be introduced, which is undefined behavior, so the shift is capped at the
value size minus one, which has the expected behavior of filling the value with the sign
bit.
Patch by Jacob Young!
Differential Revision: https://reviews.llvm.org/D32285
llvm-svn: 302548
for scalar masked instructions only the lower bit of the mask is relevant. so for constant masks we should either do an unmasked operation or no operation, depending on the value of the lower bit.
This patch handles cases where the lower bit is '1'.
Differential Revision: https://reviews.llvm.org/D32805
llvm-svn: 302546
This caused PR32977.
Original commit message:
> Make it illegal for two Functions to point to the same DISubprogram
>
> As recently discussed on llvm-dev [1], this patch makes it illegal for
> two Functions to point to the same DISubprogram and updates
> FunctionCloner to also clone the debug info of a function to conform
> to the new requirement. To simplify the implementation it also factors
> out the creation of inlineAt locations from the Inliner into a
> general-purpose utility in DILocation.
>
> [1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
> <rdar://problem/31926379>
>
> Differential Revision: https://reviews.llvm.org/D32975
llvm-svn: 302533
Summary:
In first order recurrence vectorization, when the previous value is a phi node, we need to
set the insertion point to the first non-phi node.
We can have the previous value being a phi node, due to the generation of new
IVs as part of trunc optimization [1].
[1] https://reviews.llvm.org/rL294967
Reviewers: mssimpso, mkuper
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32969
llvm-svn: 302532
The modified tests should test the masked intrinsics.
Currently the mask is constant, which with a future patch (https://reviews.llvm.org/D32805) will cause the intrinsics to be replaced with an unmasked version.
This patch changes the constant mask to be a variable one.
llvm-svn: 302529
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
Similar to what we do for vXi8 ASHR(X, 7), use SSE42's PCMPGTQ to splat the sign instead of using the PSRAD+PSHUFD.
Avoiding bitcasts this improves combines that utilize computeNumSignBits, permits memory folding and reduces pipe pressure. Although it does require a second register, given that this is a (cheap) zero register the impact is minimal.
Differential Revision: https://reviews.llvm.org/D32973
llvm-svn: 302525
This reverts commit r302461.
It appears to be causing failures compiling gtest with debug info on the
Linux sanitizer bot. I was unable to reproduce the failure locally,
however.
llvm-svn: 302504
Summary:
r284533 added hot and cold section prefixes based on profile
information, to enable grouping of hot/cold functions at link time.
However, it used "cold" as the prefix for cold sections, but gold only
recognizes "unlikely" (which is used by gcc for cold sections).
Therefore, cold sections were not properly being grouped. Switch to
using "unlikely"
Reviewers: danielcdh, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32983
llvm-svn: 302502
Summary:
For inalloca functions, this is a very common code pattern:
%argpack = type <{ i32, i32, i32 }>
define void @f(%argpack* inalloca %args) {
entry:
%a = getelementptr inbounds %argpack, %argpack* %args, i32 0, i32 0
%b = getelementptr inbounds %argpack, %argpack* %args, i32 0, i32 1
%c = getelementptr inbounds %argpack, %argpack* %args, i32 0, i32 2
tail call void @llvm.dbg.declare(metadata i32* %a, ... "a")
tail call void @llvm.dbg.declare(metadata i32* %c, ... "b")
tail call void @llvm.dbg.declare(metadata i32* %b, ... "c")
Even though these GEPs can be simplified to a constant offset from EBP
or RSP, we don't do that at -O0, and each GEP is computed into a
register. Registers used to compute argument addresses are typically
spilled and clobbered very quickly after the initial computation, so
live debug variable tracking loses information very quickly if we use
DBG_VALUE instructions.
This change moves processing of dbg.declare between argument lowering
and basic block isel, so that we can ask if an argument has a frame
index or not. If the argument lives in a register as is the case for
byval arguments on some targets, then we don't put it in the side table
and during ISel we emit DBG_VALUE instructions.
Reviewers: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32980
llvm-svn: 302483
As recently discussed on llvm-dev [1], this patch makes it illegal for
two Functions to point to the same DISubprogram and updates
FunctionCloner to also clone the debug info of a function to conform
to the new requirement. To simplify the implementation it also factors
out the creation of inlineAt locations from the Inliner into a
general-purpose utility in DILocation.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-May/112661.html
<rdar://problem/31926379>
Differential Revision: https://reviews.llvm.org/D32975
llvm-svn: 302469
This is another step towards getting rid of dyn_castNotVal,
so we can recommit:
https://reviews.llvm.org/rL300977
As the tests show, we were missing the lshr case for constants
and both ashr/lshr vector splat folds. The ashr case with constant
was being performed inefficiently in 2 steps. It's also possible
there was a latent bug in that case because we can't do that fold
if the constant is positive:
http://rise4fun.com/Alive/Bge
llvm-svn: 302465
Summary:
An llvm.dbg.declare of a static alloca is always added to the
MachineFunction dbg variable map, so these values are entirely
redundant. They survive all the way through codegen to be ignored by
DWARF emission.
Effectively revert r113967
Two bugpoint-reduced test cases from 2012 broke as a result of this
change. Despite my best efforts, I haven't been able to rewrite the test
case using dbg.value. I'm not too concerned about the lost coverage
because these were reduced from the test-suite, which we still run.
Reviewers: aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32920
llvm-svn: 302461
This fixes PR32550, in a way that does not imply running the greedy
mode at O0.
The fix consists in checking if a load is used by any floating point
instruction and if yes, we return a default mapping with FPR instead
of GPR.
llvm-svn: 302453
Transforms/IndVarSimplify/2011-10-27-lftrnull will fail if this regresses.
Transforms/GVN/PRE/2011-06-01-NonLocalMemdepMiscompile.ll has been changed to still test what it was
trying to test.
llvm-svn: 302446
This patch uses KnownOnes of the input of ctlz/cttz to bound the value that can be returned from these intrinsics. This makes these intrinsics more similar to the handling for ctpop which already uses known bits to produce a similar bound.
Differential Revision: https://reviews.llvm.org/D32521
llvm-svn: 302444
Currently combineLogicBlendIntoPBLENDV can only match ASHR to detect sign splatting of a bit mask, this patch generalises this to use computeNumSignBits instead.
This is a first step in several things we can do to improve PBLENDV support:
* Better matching of X86ISD::ANDNP patterns.
* Handle floating point cases.
* Better vector and bitcast support in computeNumSignBits.
* Recognise that PBLENDV only uses the sign bit of the mask, we should be able strip away sign splats (ASHR, PCMPGT isNeg tests etc.).
Differential Revision: https://reviews.llvm.org/D32953
llvm-svn: 302424
Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 302416
This patch propogates the environment variable SYSTEMDRIVE on Windows when
running the unit tests. This prevents the creation of a directory named
"%SystemDrive%" when running the unit tests from FileSystemTest that use the
function llvm::sys::fs::remove_directories which in turn uses SHFileOperationW.
It is within SHFileOperationW that this environment variable may be used and if
undefined causes the creation of a "%SystemDrive%" directory in the current
directory.
Differential Revision: https://reviews.llvm.org/D32910
llvm-svn: 302409
This patch introduces an LLVM intrinsic and a target opcode for custom event
logging in XRay. Initially, its use case will be to allow users of XRay to log
some type of string ("poor man's printf"). The target opcode compiles to a noop
sled large enough to enable calling through to a runtime-determined relative
function call. At runtime, when X-Ray is enabled, the sled is replaced by
compiler-rt with a trampoline to the logic for creating the custom log entries.
Future patches will implement the compiler-rt parts and clang-side support for
emitting the IR corresponding to this intrinsic.
Reviewers: timshen, dberris
Subscribers: igorb, pelikan, rSerge, timshen, echristo, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D27503
llvm-svn: 302405
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302399
Summary:
This reverts commit 56beec1b1cfc6d263e5eddb7efff06117c0724d2.
Revert "Quick fix to D32609, it seems .o files are not transferred in all cases."
This reverts commit 7652eecd29cfdeeab7f76f687586607a99ff4e36.
Revert "Update llvm-readobj -coff-resources to display tree structure."
This reverts commit 422b62c4d302cfc92401418c2acd165056081ed7.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32958
llvm-svn: 302397
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302386
Account for subvector extraction/insertion, helps prevent the vectorizers from selecting 256-bit vectors that will have to be split anyhow on AVX1 targets.
llvm-svn: 302378
Summary:
Re-applying r301766 with a fix to a typo and a regression test.
The log message for r301766 was:
==================================================================================
InstructionSimplify: Canonicalize shuffle operands. NFC-ish.
Summary:
Apply canonicalization rules:
1. Input vectors with no elements selected from can be replaced with undef.
2. If only one input vector is constant it shall be the second one.
This allows constant-folding to cover more ad-hoc simplifications that
were in place and avoid duplication for RHS and LHS checks.
There are more rules we may want to add in the future when we see a
justification. e.g. mask elements that select undef elements can be
replaced with undef.
==================================================================================
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32863
llvm-svn: 302373
We can simplify (or (icmp X, C1), (icmp X, C2)) to 'true' or one of the icmps in many cases.
I had to check some of these with Alive to prove to myself it's right, but everything seems
to check out. Eg, the deleted code in instcombine was completely ignoring predicates with
mismatched signedness.
This is a follow-up to:
https://reviews.llvm.org/rL301260https://reviews.llvm.org/D32143
llvm-svn: 302370
rL294581 broke unnecessary register dependencies on partial v16i8/v8i16 BUILD_VECTORs, but on SSE41 we (currently) use insertion for full BUILD_VECTORs as well. By allowing full insertion to occur on SSE41 targets we can break register dependencies here as well.
llvm-svn: 302355
Remove an extra canonicalization step if ISD::ABS is going to be used anyway.
Updated x86 abs combine to check that we are lowering from both canonicalizations.
llvm-svn: 302337
This exposes a method in MachineFrameInfo that calculates
MaxCallFrameSize and calls it after instruction selection in the ARM
target.
This avoids
ARMBaseRegisterInfo::canRealignStack()/ARMFrameLowering::hasReservedCallFrame()
giving different answers in early/late phases of codegen.
The testcase shows a particular nasty example result of that where we
would fail to properly align an alloca.
Differential Revision: https://reviews.llvm.org/D32622
llvm-svn: 302303
- MIParser: If the successor list is not specified successors will be
added based on basic block operands in the block and possible
fallthrough.
- MIRPrinter: Adds a new `simplify-mir` option, with that option set:
Skip printing of block successor lists in cases where the
parser is guaranteed to reconstruct it. This means we still print the
list if some successor cannot be determined (happens for example for
jump tables), if the successor order changes or branch probabilities
being unequal.
Differential Revision: https://reviews.llvm.org/D31262
llvm-svn: 302289
o Add bpfeb support in BPF dwarfdump unit test case
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@fb.com>
llvm-svn: 302265
Oliver Stannard