Static data members were causing a problem because I mistakenly
assumed all members would affect a class's layout and so the
Layout member would be non-null.
llvm-svn: 305229
Summary:
Use the filepath used to open the archive member as the archive member
name instead of the file basename. This path might be absolute or
relative. This is important because the archive member name will show
up in the PDB, and we want our PDBs to look as much like MSVC's as
possible.
This also helps avoid an issue in our PDB module descriptor writing
code, which assumes that all module names are unique. Relative paths
still aren't guaranteed to be unique, but they're much better than
basenames, which definitely aren't unique.
Reviewers: ruiu, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33575
llvm-svn: 305223
This is to reflect the evolving nature of the tool as being
useful for more than just dumping PDBs, as it can do many other
things.
Differential Revision: https://reviews.llvm.org/D34062
llvm-svn: 305106
Summary: Add the WindowsResourceCOFFWriter class for producing the final COFF after all parsing is done.
Reviewers: hiraditya!, zturner, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34020
llvm-svn: 305092
Initial implementation - needs similar work/testing for other tools
bugpoint invokes (llc, lli I think, maybe more).
Alternatively (as suggested by chandlerc@) an environment variable could
be used. This would allow the option to pass transparently through user
scripts, pass to compilers if they happened to be LLVM-ish, etc.
I worry a bit about using cl::opt in the crash handling code - LLVM
might crash early, perhaps before the cl::opt is properly initialized?
Or at least before arguments have been parsed?
- should be OK since it defaults to "pretty", so if the crash is very
early in opt parsing, etc, then crash reports will still be symbolized.
I shyed away from doing this with an environment variable when I
realized that would require copying the existing environment and
appending the env variable of interest. But it seems there's no existing
LLVM API for accessing the environment (even the Support tests for
process launching have their own ifdefs for getting the environment). It
could be added, but seemed like a higher bar/untested codepath to
actually add environment variables.
Most importantly, this reduces the runtime of test/BugPoint/metadata.ll
in a split-dwarf Debug build from 1m34s to 6.5s by avoiding a lot of
symbolication. (this wasn't a problem for non-split-dwarf builds only
because the executable was too large to map into memory (due to bugpoint
setting a 400MB memory (including address space - not sure why? Going to
remove that) limit on the child process) so symbolication would fail
fast & wouldn't spend all that time parsing DWARF, etc)
Reviewers: chandlerc, dannyb
Differential Revision: https://reviews.llvm.org/D33804
llvm-svn: 305056
This is a preparatory change to expose the debug compression style to
clang. It requires exposing the enumeration and passing the actual
value through to the backend from the frontend in actual value form
rather than a boolean that selects the GNU style of debug info
compression.
Minor tweak to the ELF Object Writer to use a variable for re-used
values. Add an assertion that debug information format is one of the
two currently known types if debug information is being compressed.
llvm-svn: 305038
This adds support for Symbols, StringTable, and FrameData subsection
types. Even though these subsections rarely if ever appear in a PDB
file (they are usually in object files), there's no theoretical reason
why they *couldn't* appear in a PDB. The real issue though is that in
order to add support for dumping and writing them (which will be useful
for object files), we need a way to test them. And since there is no
support for reading and writing them to / from object files yet, making
PDB support them is the best way to both add support for the underlying
format and add support for tests at the same time. Later, when we go
to add support for reading / writing them from object files, we'll need
only minimal changes in the underlying read/write code.
llvm-svn: 305037
This is the same change for the YAML Output style applied to the
raw output style. Previously we would queue up all subsections
until every one had been read, and then output them in a pre-
determined order. This was because some subsections need to be
read first in order to properly dump later subsections. This
patch allows them to be dumped in the order they appear.
Differential Revision: https://reviews.llvm.org/D34015
llvm-svn: 305034
The pdb2yaml and raw subcommands did something very
similar but with a different output format, and they
used a lot of the same command line options, but each
one re-implemented the command line option with slightly
different spellings / options. This patch merges them
together into a single definition which is shared by
both subcommands. This new syntax also allows for more
flexibility in the way debug subsections are dumped.
Differential Revision: https://reviews.llvm.org/D33996
llvm-svn: 305032
This is to prepare to allow for dead stripping of globals in the
merged modules.
Differential Revision: https://reviews.llvm.org/D33921
llvm-svn: 305027
Apparently support for /debug:fastlink PDBs isn't part of the
DIA SDK (!), and it was causing llvm-pdbdump to crash because
we weren't checking for a null pointer return value. This
manifests when calling findChildren on the IDiaSymbol, and
it returns E_NOTIMPL.
llvm-svn: 304982
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
This patch introduces a new command line option, called brief, to
llvm-dwarfdump. When -brief is used, the attribute forms for the
.debug_info section will not be emitted to output.
Patch by Spyridoula Gravani!
rdar://problem/21474365
Differential Revision: https://reviews.llvm.org/D33867
llvm-svn: 304844
- Add -x <language> option to switch between IR and MIR inputs.
- Change MIR parser to read from stdin when filename is '-'.
- Add a simple mir roundtrip test.
llvm-svn: 304825
When parsing .mir files immediately construct the MachineFunctions and
put them into MachineModuleInfo.
This allows us to get rid of the delayed construction (and delayed error
reporting) through the MachineFunctionInitialzier interface.
Differential Revision: https://reviews.llvm.org/D33809
llvm-svn: 304758
Create a custom pass pipeline when loading .mir files even in
--start-after/--start-before cases.
This streamlines the mir handling code and prepares for an upcoming
commit.
llvm-svn: 304755
While it's not entirely clear why a compiler or linker might
put this information into an object or PDB file, one has been
spotted in the wild which was causing llvm-pdbdump to crash.
This patch adds support for reading-writing these sections.
Since I don't know how to get one of the native tools to
generate this kind of debug info, the only test here is one
in which we feed YAML into the tool to produce a PDB and
then spit out YAML from the resulting PDB and make sure that
it matches.
llvm-svn: 304738
procedural optimizations to prevent dropping symbols and allow the linker
to process re-directs.
PR33145: --wrap doesn't work with lto.
Differential Revision: https://reviews.llvm.org/D33621
llvm-svn: 304719
Previously MappedBlockStream owned its own BumpPtrAllocator that
it would allocate from when a read crossed a block boundary. This
way it could still return the user a contiguous buffer of the
requested size. However, It's not uncommon to open a stream, read
some stuff, close it, and then save the information for later.
After all, since the entire file is mapped into memory, the data
should always be available as long as the file is open.
Of course, the exception to this is when the data isn't *in* the
file, but rather in some buffer that we temporarily allocated to
present this contiguous view. And this buffer would get destroyed
as soon as the strema was closed.
The fix here is to force the user to specify the allocator, this
way it can provide an allocator that has whatever lifetime it
chooses.
Differential Revision: https://reviews.llvm.org/D33858
llvm-svn: 304623
This pass allows to run the register scavenging independently of
PrologEpilogInserter to allow targeted testing.
Also adds some basic register scavenging tests.
llvm-svn: 304606
Previously we would expect certain subsections to appear
in a certain order because some subsections would reference
other subsections, but in practice we need to support
arbitrary orderings since some object file and PDB file
producers generate them this way. This also paves the
way for supporting Yaml <-> Object File conversion of
CodeView, since Object Files typically have quite a
large number of subsections in their debug info.
Differential Revision: https://reviews.llvm.org/D33807
llvm-svn: 304588
Summary:
As we teach Clang to use ThinkLTO + new PM, it's good for the users to
inject through Config, instead of setting a flag in the LTOBackend
library. Move the flag to llvm-lto2.
As it moves to llvm-lto2, a new name -use-new-pm seems simpler and as
clear.
Reviewers: davide, tejohnson
Subscribers: mehdi_amini, Prazek, inglorion, eraman, chandlerc, llvm-commits
Differential Revision: https://reviews.llvm.org/D33799
llvm-svn: 304492
Object files have symbol records not aligned to any particular
boundary (e.g. 1-byte aligned), while PDB files have symbol
records padded to 4-byte aligned boundaries. Since they share
the same reading / writing code, we have to provide an option to
specify the alignment and propagate it up to the producer or
consumer who knows what the alignment is supposed to be for the
given container type.
Added a test for this by modifying the existing PDB -> YAML -> PDB
round-tripping code to round trip symbol records as well as types.
Differential Revision: https://reviews.llvm.org/D33785
llvm-svn: 304484
It doesn't exist on Windows. The number we use here doesn't really matter,
the storage will expand automatically but 256 seems like a reasonable default.
Should fix windows buildbots that complained about rL304458.
llvm-svn: 304468
Summary:
`LLVM_TOOLS_INSTALL_DIR` was introduced in r272200 in order to override the directory
name into which to install LLVM's executable. However, `llvm-config --bindir` still reported
`$PREFIX/bin` independent of what LLVM_TOOLS_INSTALL_DIR was set to.
This fixes the out-of-tree clang standalone build for me.
Reviewers: beanz, tstellar
Reviewed By: tstellar
Subscribers: chapuni, tstellar, llvm-commits
Differential Revision: https://reviews.llvm.org/D22499
llvm-svn: 304458
This commit introduces a structure that holds all the flags that
control the pretty printing of dwarf output.
Patch by Spyridoula Gravani!
Differential Revision: https://reviews.llvm.org/D33749
llvm-svn: 304446
Summary: Also see D33429 for other ThinLTO + New PM related changes.
Reviewers: davide, chandlerc, tejohnson
Subscribers: mehdi_amini, Prazek, cfe-commits, inglorion, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D33525
llvm-svn: 304378
The code was a mess and disorganized due to the sheer amount
of it being in one file. So I'm splitting this into three files.
One for CodeView types, one for CodeView symbols, and one for
CodeView debug subsections. NFC.
llvm-svn: 304278
CodeViewYAML.h attempts to hide the details of many of the
CodeView yaml structures and types, but at the same time it
exposes the mapping traits for them to external users of the
header.
This patch just hides these in the implementation files so that
the interface is kept as simple as possible.
llvm-svn: 304263
This continues the effort to get the CodeView YAML parsing logic
into ObjectYAML. After this patch, the only missing piece will
be the CodeView debug symbol subsections.
llvm-svn: 304256
This is the beginning of an effort to move the codeview yaml
reader / writer into ObjectYAML so that it can be shared.
Currently the only consumer / producer of CodeView YAML is
llvm-pdbdump, but CodeView can exist outside of PDB files, and
indeed is put into object files and passed to the linker to
produce PDB files. Furthermore, there are subtle differences
in the types of records that show up in object file CodeView
vs PDB file CodeView, but they are otherwise 99% the same.
By having this code in ObjectYAML, we can have llvm-pdbdump
reuse this code, while teaching obj2yaml and yaml2obj to use
this syntax for dealing with object files that can contain
CodeView.
This patch only adds support for CodeView type information
to ObjectYAML. Subsequent patches will add support for
CodeView symbol information.
llvm-svn: 304248
This adds implementations for Symbols and FrameData, and renames
the existing codeview::StringTable class to conform to the
DebugSectionStringTable convention.
llvm-svn: 304222
We have a lot of complicated logic to determine where padding
is in a record, and the debug info doesn't always provide enough
information to figure it out with laser precision. In this case
we were putting the padding in the wrong place causing an
out of bounds access on a BitVector.
Right now we decide that any trailing padding of a child type
will be truncated during record layout, but this is only true
insofar as the class still is sized properly to end on an
alignment boundary, which the algorithm doesn't yet know about.
For now, just don't crash, even though we display padding twice
in this case.
llvm-svn: 303946
Summary:
Previously, the yaml2pdb subcommand of llvm-pdbdump only
included object file names in module info if a module info stream was
present. This change makes it so that we include the object file name
even if there is no module info stream for the module. As a result,
running
llvm-pdbdump pdb2yaml -dbi-module-info original.pdb > original.yaml &&
llvm-pdbdump yaml2pdb -pdb=new.pdb original.yaml && llvm-pdbdump
pdb2yaml -dbi-module-info new.pdb > new.yaml now produces identical
original.yaml and new.yaml files.
Reviewers: amccarth, zturner
Reviewed By: zturner
Subscribers: fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D33463
llvm-svn: 303891
This change allows llvm-nm to print symbols found in import libraries,
in part by allowing COFFImportFiles to be casted to SymbolicFiles.
Patch by Dave Lee!
llvm-svn: 303821
Summary:
First, StringMap uses llvm::HashString, which is only good for short
identifiers and really bad for large blobs of binary data like type
records. Moving to `DenseMap<StringRef, TypeIndex>` with some tricks for
memory allocation fixes that.
Unfortunately, that didn't buy very much performance. Profiling showed
that we spend a long time during DenseMap growth rehashing existing
entries. Also, in general, DenseMap is faster when the keys are small.
This change takes that to the logical conclusion by introducing a small
wrapper value type around a pointer to key data. The key data contains a
precomputed hash, the original record data (pointer and size), and the
type index, which is the "value" of our original map.
This reduces the time to produce llvm-as.exe and llvm-as.pdb from ~15s
on my machine to 3.5s, which is about a 4x improvement.
Reviewers: zturner, inglorion, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33428
llvm-svn: 303665
Previous algotirhm assumed that types and ids are in a single
unified stream. For inputs that come from object files, this
is the case. But if the input is already a PDB, or is the result
of a previous merge, then the types and ids will already have
been split up, in which case we need an algorithm that can
accept operate on independent streams of types and ids that
refer across stream boundaries to each other.
Differential Revision: https://reviews.llvm.org/D33417
llvm-svn: 303577
Summary: Added the new modules in the Object/ folder. Updated the
llvm-cvtres interface as well, and added additional tests.
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33180
llvm-svn: 303480
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
llvm-svn: 303446
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
llvm-svn: 303409
Merging PDBs is a feature that will be used heavily by
the linker. The functionality already exists but does not
have deep test coverage because it's not easily exposed through
any tools. This patch aims to address that by adding the
ability to merge PDBs via llvm-pdbdump. It takes arbitrarily
many PDBs and outputs a single PDB.
Using this new functionality, a test is added for merging
type records. Future patches will add the ability to merge
symbol records, module information, etc.
llvm-svn: 303389
Right now we have multiple notions of things that represent collections of
types. Most commonly used are TypeDatabase, which is supposed to keep
mappings from TypeIndex to type name when reading a type stream, which
happens when reading PDBs. And also TypeTableBuilder, which is used to
build up a collection of types dynamically which we will later serialize
(i.e. when writing PDBs).
But often you just want to do some operation on a collection of types, and
you may want to do the same operation on any kind of collection. For
example, you might want to merge two TypeTableBuilders or you might want
to merge two type streams that you loaded from various files.
This dichotomy between reading and writing is responsible for a lot of the
existing code duplication and overlapping responsibilities in the existing
CodeView library classes. For example, after building up a
TypeTableBuilder with a bunch of type records, if we want to dump it we
have to re-invent a bunch of extra glue because our dumper takes a
TypeDatabase or a CVTypeArray, which are both incompatible with
TypeTableBuilder.
This patch introduces an abstract base class called TypeCollection which
is shared between the various type collection like things. Wherever we
previously stored a TypeDatabase& in some common class, we now store a
TypeCollection&.
The advantage of this is that all the details of how the collection are
implemented, such as lazy deserialization of partial type streams, is
completely transparent and you can just treat any collection of types the
same regardless of where it came from.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303388
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
llvm-svn: 303360
I revisited Decompressor API (issue with it was triggered during D32865 review)
and found it is probably provides more then we really need.
Issue was about next method's signature:
Error decompress(SmallString<32> &Out);
It is too strict. At first I wanted to change it to decompress(SmallVectorImpl<char> &Out),
but then found it is still not flexible because sticks to SmallVector.
During reviews was suggested to use templating to simplify code. Patch do that.
Differential revision: https://reviews.llvm.org/D33200
llvm-svn: 303331
Summary:
llvm-pdbdump yaml2pdb used to fail with a misleading error
message ("An I/O error occurred on the file system") if no output file
was specified. This change adds an assert to PDBFileBuilder to check
that an output file name is specified, and makes llvm-pdbdump generate
an output file name based on the input file name if no output file
name is explicitly specified.
Reviewers: amccarth, zturner
Reviewed By: zturner
Subscribers: fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D33296
llvm-svn: 303299
Often you have an array and you just want to use it. With the current
design, you have to first construct a `BinaryByteStream`, and then create
a `BinaryStreamRef` from it. Worse, the `BinaryStreamRef` holds a pointer
to the `BinaryByteStream`, so you can't just create a temporary one to
appease the compiler, you have to actually hold onto both the `ArrayRef`
as well as the `BinaryByteStream` *AND* the `BinaryStreamReader` on top of
that. This makes for very cumbersome code, often requiring one to store a
`BinaryByteStream` in a class just to circumvent this.
At the cost of some added complexity (not exposed to users, but internal
to the library), we can do better than this. This patch allows us to
construct `BinaryStreamReaders` and `BinaryStreamWriters` directly from
source data (e.g. `StringRef`, `MutableArrayRef<uint8_t>`, etc). Not only
does this reduce the amount of code you have to type and make it more
obvious how to use it, but it solves real lifetime issues when it's
inconvenient to hold onto a `BinaryByteStream` for a long time.
The additional complexity is in the form of an added layer of indirection.
Whereas before we simply stored a `BinaryStream*` in the ref, we now store
both a `BinaryStream*` **and** a `std::shared_ptr<BinaryStream>`. When
the user wants to construct a `BinaryStreamRef` directly from an
`ArrayRef` etc, we allocate an internal object that holds ownership over a
`BinaryByteStream` and forwards all calls, and store this in the
`shared_ptr<>`. This also maintains the ref semantics, as you can copy it
by value and references refer to the same underlying stream -- the one
being held in the object stored in the `shared_ptr`.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303294
There is often a lot of boilerplate code required to visit a type
record or type stream. The #1 use case is that you have a sequence
of bytes that represent one or more records, and you want to
deserialize each one, switch on it, and call a callback with the
deserialized record that the user can examine. Currently this
requires at least 6 lines of code:
codeview::TypeVisitorCallbackPipeline Pipeline;
Pipeline.addCallbackToPipeline(Deserializer);
Pipeline.addCallbackToPipeline(MyCallbacks);
codeview::CVTypeVisitor Visitor(Pipeline);
consumeError(Visitor.visitTypeRecord(Record));
With this patch, it becomes one line of code:
consumeError(codeview::visitTypeRecord(Record, MyCallbacks));
This is done by having the deserialization happen internally inside
of the visitTypeRecord function. Since this is occasionally not
desirable, the function provides a 3rd parameter that can be used
to change this behavior.
Hopefully this can significantly reduce the barrier to entry
to using the visitation infrastructure.
Differential Revision: https://reviews.llvm.org/D33245
llvm-svn: 303271
Currently, when masked load, store, gather or scatter intrinsics are used, we check in CodeGenPrepare pass if the subtarget support these intrinsics, if not we replace them with scalar code - this is a functional transformation not an optimization (not optional).
CodeGenPrepare pass does not run when the optimization level is set to CodeGenOpt::None (-O0).
Functional transformation should run with all optimization levels, so here I created a new pass which runs on all optimization levels and does no more than this transformation.
Differential Revision: https://reviews.llvm.org/D32487
llvm-svn: 303050
This reorganisation prevents us from cluttering up the top-level lib directory
with more driver libraries such as llvm-dlltool (see D29892).
llvm-svn: 302995
This adds a visitor that is capable of accessing type
records randomly and caching intermediate results that it
learns about during partial linear scans. This yields
amortized O(1) access to a type stream even though type
streams cannot normally be indexed.
Differential Revision: https://reviews.llvm.org/D33009
llvm-svn: 302936
The previous code was discarding the error message from
createBinary() by calling errorToErrorCode().
This meant that such error were always reported unhelpfully
as "Invalid data was encountered while parsing the file".
Other tools such as llvm-objdump already produce a more
the error message in this case.
Differential Revision: https://reviews.llvm.org/D32985
llvm-svn: 302664
This pass uses a new target hook to decide whether or not to expand a particular
intrinsic to the shuffevector sequence.
Differential Revision: https://reviews.llvm.org/D32245
llvm-svn: 302631
This lets the pass focus on gathering the required analyzes, and the
utility class focus on the transformation.
Differential Revision: https://reviews.llvm.org/D31303
llvm-svn: 302609
This warning didn't show up on my local build
but is causing the bots to fail. Seems like a
bad idea to have types and variables with the
same name anyhow.
Differential Revision: https://reviews.llvm.org/D33022
llvm-svn: 302606
Previously we had only supported the importing and
exporting of functions and globals.
Also, add usefull overload of getWasmSymbol() and
getNumberOfSymbols() in support of lld port.
Differential Revision: https://reviews.llvm.org/D33011
llvm-svn: 302601
frames.
RuntimeDyld was previously responsible for tracking allocated EH frames, but it
makes more sense to have the RuntimeDyld::MemoryManager track them (since the
frames are allocated through the memory manager, and written to memory owned by
the memory manager). This patch moves the frame tracking into
RTDyldMemoryManager, and changes the deregisterFrames method on
RuntimeDyld::MemoryManager from:
void deregisterEHFrames(uint8_t *Addr, uint64_t LoadAddr, size_t Size);
to:
void deregisterEHFrames();
Separating this responsibility will allow ORC to continue to throw the
RuntimeDyld instances away post-link (saving a few dozen bytes per lazy
function) while properly deregistering frames when modules are unloaded.
This patch also updates ORC to call deregisterEHFrames when modules are
unloaded. This fixes a bug where an exception that tears down the JIT can then
unwind through dangling EH frames that have been deallocated but not
deregistered, resulting in UB.
For people using SectionMemoryManager this should be pretty much a no-op. For
people with custom allocators that override registerEHFrames/deregisterEHFrames,
you will now be responsible for tracking allocated EH frames.
Reviewed in https://reviews.llvm.org/D32829
llvm-svn: 302589
Use variadic templates instead of relying on <cstdarg> + sentinel.
This enforces better type checking and makes code more readable.
Differential Revision: https://reviews.llvm.org/D32541
llvm-svn: 302571
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302399
Summary:
This reverts commit 56beec1b1cfc6d263e5eddb7efff06117c0724d2.
Revert "Quick fix to D32609, it seems .o files are not transferred in all cases."
This reverts commit 7652eecd29cfdeeab7f76f687586607a99ff4e36.
Revert "Update llvm-readobj -coff-resources to display tree structure."
This reverts commit 422b62c4d302cfc92401418c2acd165056081ed7.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32958
llvm-svn: 302397
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302386
Currently llvm-rtdyld in -check mode will map sections to back-to-back 4k
aligned slabs starting at 0x1000. Automatically remapping sections by default is
helpful because it quickly exposes relocation bugs due to use of local addresses
rather than load addresses (these would silently pass if the load address was
not remapped). These mappings can be explicitly overridden on a per-section
basis using llvm-rtdlyd's -map-section option. This patch extends this scheme to
also preserve any mappings made by RuntimeDyld itself. Preserving RuntimeDyld's
automatic mappings allows us to write test cases to verify that these automatic
mappings have been applied.
This will allow the fix in https://reviews.llvm.org/D32899 to be tested with
llvm-rtdyld -check.
llvm-svn: 302372
Most of the time we know exactly how many type records we
have in a list, and we want to use the visitor to deserialize
them into actual records in a database. Previously we were
just using push_back() every time without reserving the space
up front in the vector. This is obviously terrible from a
performance standpoint, and it's not uncommon to have PDB
files with half a million type records, where the performance
degredation was quite noticeable.
llvm-svn: 302302
Verifying the hash values as we are currently doing
results in iterating every type record before the user
even tries to access the first one, and the API user
has no control over, or ability to hook into this
process.
As a result, when the user wants to iterate over types
to print them or index them, this results in a second
iteration over the same list of types. When there's
upwards of 1,000,000 type records, this is obviously
quite undesirable.
This patch raises the verification outside of TpiStream
, and llvm-pdbdump hooks a hash verification visitor
into the normal dumping process. So we still verify
the hash records, but we can do it while not requiring
a second iteration over the type stream.
Differential Revision: https://reviews.llvm.org/D32873
llvm-svn: 302206
I tried to run llvm-pdbdump on a very large (~1.5GB) PDB to
try and identify show-stopping performance problems. This
patch addresses the first such problem.
When loading the DBI stream, before anyone has even tried to
access a single record, we build an in memory map of every
source file for every module. In the particular PDB I was
using, this was over 85 million files. Specifically, the
complexity is O(m*n) where m is the number of modules and
n is the average number of source files (including headers)
per module.
The whole reason for doing this was so that we could have
constant time access to any module and any of its source
file lists. However, we can still get O(1) access to the
source file list for a given module with a simple O(m)
precomputation, and access to the list of modules is
already O(1) anyway.
So this patches reduces the O(m*n) up-front precomputation
to an O(m) one, where n is ~6,500 and n*m is about 85 million
in my pathological test case.
Differential Revision: https://reviews.llvm.org/D32870
llvm-svn: 302205
Building the type database is expensive, and can take multiple
minutes for large PDBs. But we only need it in certain cases
depending on what command line options are specified. So only
build it when we know we're about to need it.
llvm-svn: 302204
When profiling a no-op incremental link of Chromium I found that the functions
computeImportForFunction and computeDeadSymbols were consuming roughly 10% of
the profile. The goal of this change is to improve the performance of those
functions by changing the map lookups that they were previously doing into
pointer dereferences.
This is achieved by changing the ValueInfo data structure to be a pointer to
an element of the global value map owned by ModuleSummaryIndex, and changing
reference lists in the GlobalValueSummary to hold ValueInfos instead of GUIDs.
This means that a ValueInfo will take a client directly to the summary list
for a given GUID.
Differential Revision: https://reviews.llvm.org/D32471
llvm-svn: 302108
The raw CodeView format references strings by "offsets", but it's
confusing what table the offset refers to. In the case of line
number information, it's an offset into a buffer of records,
and an indirection is required to get another offset into a
different table to find the final string. And in the case of
checksum information, there is no indirection, and the offset
refers directly to the location of the string in another buffer.
This would be less confusing if we always just referred to the
strings by their value, and have the library be smart enough
to correctly resolve the offsets on its own from the right
location.
This patch makes that possible. When either reading or writing,
all the user deals with are strings, and the library does the
appropriate translations behind the scenes.
llvm-svn: 302053
llvm-readobj hand rolls some CodeView parsing code for string
tables, so this patch updates it to re-use some of the newly
introduced parsing code in LLVMDebugInfoCodeView.
Differential Revision: https://reviews.llvm.org/D32772
llvm-svn: 302052
Summary:
When apps or other libraries link against a library with symbol
versions, the version string is recorded in the import table, and used
at runtime to resolve the symbol back to a library that provides that
version (vaguely like how two-level namespaces work in Mach-O). ld's
--default-symver flag tags every exported symbol with a symbol version
string equal to the library's soname. Using --default-symver means
multiple versions of libLLVM can coexist within the same process, at
least to the extent that they don't try to pass data between each
other's llvms.
As an example, imagine a language like Rust using llvm for CPU codegen,
binding to OpenGL, with Mesa as the OpenGL implementation using llvm for
R600 codegen. With --default-symver Rust and Mesa will resolve their
llvm usage to the version each was linked against, which need not match.
(Other ELF platforms like BSD and Solaris might have similar semantics,
I've not checked.)
This is based on an autoconf version of this patch by Adam Jackson.
This new option can be used to add --default-symver to the linker flags
for libLLVM.so.
Reviewers: beanz
Reviewed By: beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D30997
llvm-svn: 302026
With the forthcoming codeview::StringTable which a pdb::StringTable
would hold an instance of as one member, this ambiguity becomes
confusing. Rename to PDBStringTable to avoid this.
llvm-svn: 301948
Previously we wrote line information and file checksum
information, but we did not write information about inlinee
lines and functions. This patch adds support for that.
llvm-svn: 301936
This is motivated by https://reviews.llvm.org/D32488 where I am trying
to add printing of the section type for incompatible sections to LLD
error messages. This patch allows us to use the same code in
llvm-readobj and LLD instead of duplicating the function inside LLD.
Patch by Alexander Richardson!
llvm-svn: 301921
lldb-dwarfdump gets a new "--verify" option that will verify a single file's DWARF debug info and will print out any errors that it finds. It will return an non-zero exit status if verification fails, and a zero exit status if verification succeeds. Adding the --quiet option will suppress any output the STDOUT or STDERR.
The first part of the verify does the following:
- verifies that all CU relative references (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata) have valid CU offsets
- verifies that all DW_FORM_ref_addr references have valid .debug_info offsets
- verifies that all DW_AT_ranges attributes have valid .debug_ranges offsets
- verifies that all DW_AT_stmt_list attributes have valid .debug_line offsets
- verifies that all DW_FORM_strp attributes have valid .debug_str offsets
Unit tests were added for each of the above cases.
Differential Revision: https://reviews.llvm.org/D32707
llvm-svn: 301844
This is to prepare for an upcoming change which uses pointers instead of
GUIDs to represent references.
Differential Revision: https://reviews.llvm.org/D32469
llvm-svn: 301843
In preparation for introducing writing capabilities for each of
these classes, I would like to adopt a Foo / FooRef naming
convention, where Foo indicates that the class can manipulate and
serialize Foos, and FooRef indicates that it is an immutable view of
an existing Foo. In other words, Foo is a writer and FooRef is a
reader. This patch names some existing readers to conform to the
FooRef convention, while offering no functional change.
llvm-svn: 301810
There is a lot of duplicate code for printing line info between
YAML and the raw output printer. This introduces a base class
that can be shared between the two, and makes some minor
cleanups in the process.
llvm-svn: 301728
The llvm-readobj parsing code currently exists in our CodeView
library, so we use that to parse instead of re-writing the logic
in the tool.
llvm-svn: 301718
When dumping raw data from a stream, you might know the offset
of a certain record you're interested in, as well as how long
that record is. Previously, you had to dump the entire stream
and wade through the bytes to find the interesting record.
This patch allows you to specify an offset and length on the
command line, and it will only dump the requested range.
llvm-svn: 301607
Reviewers: zturner, hansw, hans
Reviewed By: hans
Subscribers: hans, llvm-commits
Differential Revision: https://reviews.llvm.org/D32611
llvm-svn: 301595
This patch dumps the raw bytes of the .rsrc sections that
are present in COFF object and executable files. Subsequent
patches will parse this information and dump in a more human
readable format.
Differential Revision: https://reviews.llvm.org/D32463
Patch By: Eric Beckmann
llvm-svn: 301578
Previously parsing of these were all grouped together into a
single master class that could parse any type of debug info
fragment.
With writing forthcoming, the complexity of each individual
fragment is enough to warrant them having their own classes so
that reading and writing of each fragment type can be grouped
together, but isolated from the code for reading and writing
other fragment types.
In doing so, I found a place where parsing code was duplicated
for the FileChecksums fragment, across llvm-readobj and the
CodeView library, and one of the implementations had a bug.
Now that the codepaths are merged, the bug is resolved.
Differential Revision: https://reviews.llvm.org/D32547
llvm-svn: 301557
We have a lot of very similarly named classes related to
dealing with module debug info. This patch has NFC, it just
renames some classes to be more descriptive (albeit slightly
more to type). The mapping from old to new class names is as
follows:
Old | New
ModInfo | DbiModuleDescriptor
ModuleSubstream | ModuleDebugFragment
ModStream | ModuleDebugStream
With the corresponding Builder classes renamed accordingly.
Differential Revision: https://reviews.llvm.org/D32506
llvm-svn: 301555
DISubprogram currently has 10 pointer operands, several of which are
often nullptr. This patch reduces the amount of memory allocated by
DISubprogram by rearranging the operands such that containing type,
template params, and thrown types come last, and are only allocated
when they are non-null (or followed by non-null operands).
This patch also eliminates the entirely unused DisplayName operand.
This saves up to 4 pointer operands per DISubprogram. (I tried
measuring the effect on peak memory usage on an LTO link of an X86
llc, but the results were very noisy).
This reapplies r301498 with an attempted workaround for g++.
Differential Revision: https://reviews.llvm.org/D32560
llvm-svn: 301501
DISubprogram currently has 10 pointer operands, several of which are
often nullptr. This patch reduces the amount of memory allocated by
DISubprogram by rearranging the operands such that containing type,
template params, and thrown types come last, and are only allocated
when they are non-null (or followed by non-null operands).
This patch also eliminates the entirely unused DisplayName operand.
This saves up to 4 pointer operands per DISubprogram. (I tried
measuring the effect on peak memory usage on an LTO link of an X86
llc, but the results were very noisy).
llvm-svn: 301498
We were already parsing and dumping this to the human readable
format, but not to the YAML format. This does so, in preparation
for reading it in and reconstructing the line information from
YAML.
llvm-svn: 301357
This may trigger a segfault in llvm-objdump when the line number stored
in debug infromation points beyond the end of file; lines in LineBuffer
are stored in std::vector which is allocated in chunks, so even if the
debug info points beyond the end of the file, this doesn't necessarily
trigger the segfault unless the line number points beyond the allocated
space.
Differential Revision: https://reviews.llvm.org/D32466
llvm-svn: 301347
The *real* difference between these two was that
a) The "graphical" dumper could recurse, while the text one could
not.
b) The "text" dumper could display nested types and functions,
while the graphical one could not.
Merge these two so that there is only one dumper that can recurse
arbitrarily deep and optionally display nested types or not.
llvm-svn: 301204
This reworks the way virtual bases are handled, and also the way
padding is detected across multiple levels of aggregates, producing
a much more accurate result.
llvm-svn: 301203
I found this when investigated "Bug 32319 - .gdb_index is broken/incomplete" for LLD.
When we have object file with .debug_ranges section it may be filled with zeroes.
Relocations are exist in file to relocate this zeroes into real values later, but until that
a pair of zeroes is treated as terminator. And DWARF parser thinks there is no ranges at all
when I am trying to collect address ranges for building .gdb_index.
Solution implemented in this patch is to take relocations in account when parsing ranges.
Differential revision: https://reviews.llvm.org/D32228
llvm-svn: 301170
Summary:
This is a tool for comparing the function graphs produced by the
llvm-xray graph too. It takes the form of a new subcommand of the
llvm-xray tool 'graph-diff'.
This initial version of the patch is very rough, but it is close to
feature complete.
Depends on D29363
Reviewers: dblaikie, dberris
Reviewed By: dberris
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29320
llvm-svn: 301160
Since Split DWARF needs to name the actual .dwo file that is generated,
it can't be known at the time the llvm::Module is produced as it may be
merged with other Modules before the object is generated and that object
may be generated with any name.
By passing the Split DWARF file name when LLVM is producing object code
the .dwo file name in the object file can match correctly.
The support for Split DWARF for implicit modules remains the same -
using metadata to store the dwo name and dwo id so that potentially
multiple skeleton CUs referring to different dwo files can be generated
from one llvm::Module.
llvm-svn: 301062
This marks the beginning of an effort to port remaining
MSVC toolchain miscellaneous utilities to all platforms.
Currently clang-cl shells out to certain additional tools
such as the IDL compiler, resource compiler, and a few
other tools, but as these tools are Windows-only it
limits the ability of clang to target Windows on other
platforms. having a full suite of these tools directly
in LLVM should eliminate this constraint.
The current implementation provides no actual functionality,
it is just an empty skeleton executable for the purposes
of making incremental changes.
Differential Revision: https://reviews.llvm.org/D32095
Patch by Eric Beckmann (ecbeckmann@google.com)
llvm-svn: 301004
Associate the version-when-defined with definitions of standard DWARF
constants. Identify the "vendor" for DWARF extensions.
Use this information to verify FORMs in .debug_abbrev are defined as
of the DWARF version specified in the associated unit.
Removed two tests that had specified DWARF v1 (which essentially does
not exist).
Differential Revision: http://reviews.llvm.org/D30785
llvm-svn: 300875
Summary:
This allows us to, if the symbol names are available in the binary, be
able to provide the function name in the YAML output.
Reviewers: dblaikie, pelikan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32153
llvm-svn: 300624
Summary:
This patch adds a very simple linker script to version the lib's symbols
and thus trying to avoid crashes if an application loads two different
LLVM versions (as long as they do not share data between them).
Note that we deliberately *don't* make LLVM_5.0 depend on LLVM_4.0:
they're incompatible and the whole point of this patch is
to tell the linker that.
Avoid unexpected crashes when two LLVM versions are used in the same process.
Author: Rebecca N. Palmer <rebecca_palmer@zoho.com>
Author: Lisandro Damían Nicanor Pérez Meyer <lisandro@debian.org>
Author: Sylvestre Ledru <sylvestre@debian.org>
Bug-Debian: https://bugs.debian.org/848368
Reviewers: beanz, rnk
Reviewed By: rnk
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D31524
llvm-svn: 300496
Add a top-level STRTAB block containing a string table blob, and start storing
strings for module codes FUNCTION, GLOBALVAR, ALIAS, IFUNC and COMDAT in
the string table.
This change allows us to share names between globals and comdats as well
as between modules, and improves the efficiency of loading bitcode files by
no longer using a bit encoding for symbol names. Once we start writing the
irsymtab to the bitcode file we will also be able to share strings between
it and the module.
On my machine, link time for Chromium for Linux with ThinLTO decreases by
about 7% for no-op incremental builds or about 1% for full builds. Total
bitcode file size decreases by about 3%.
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2017-April/111732.html
Differential Revision: https://reviews.llvm.org/D31838
llvm-svn: 300464
This is a version of D32090 that unifies all of the
`getInstrProf*SectionName` helper functions. (Note: the build failures
which D32090 would have addressed were fixed with r300352.)
We should unify these helper functions because they are hard to use in
their current form. E.g we recently introduced more helpers to fix
section naming for COFF files. This scheme doesn't totally succeed at
hiding low-level details about section naming, so we should switch to an
API that is easier to maintain.
This is not an NFC commit because it fixes llvm-cov's testing support
for COFF files (this falls out of the API change naturally). This is an
area where we lack tests -- I will see about adding one as a follow up.
Testing: check-clang, check-profile, check-llvm.
Differential Revision: https://reviews.llvm.org/D32097
llvm-svn: 300381
Now that the libObect support for wasm is better we can
have readobj and nm produce more useful output too.
Differential Revision: https://reviews.llvm.org/D31514
llvm-svn: 300365
Start using it in LLD to avoid needing to read bitcode again just to get the
target triple, and in llvm-lto2 to avoid printing symbol table information
that is inappropriate for the target.
Differential Revision: https://reviews.llvm.org/D32038
llvm-svn: 300300
Zachary Turner