The adds both VMOVNt and VMOVNb instruction selection from the appropriate
shuffles. We detect shuffle masks of the form:
0, N, 2, N+2, 4, N+4, ...
or
0, N+1, 2, N+3, 4, N+5, ...
ISel will also try the opposite patterns, with inputs reversed. These are
selected to VMOVNt and VMOVNb respectively.
Differential Revision: https://reviews.llvm.org/D68283
llvm-svn: 374781
This selects MVE VQADD from the vector llvm.sadd.sat or llvm.uadd.sat
intrinsics.
Differential Revision: https://reviews.llvm.org/D68566
llvm-svn: 374336
Support for tracking registers that forward function parameters into the
following function frame. For now we only support cases when parameter
is forwarded through single register.
Reviewers: aprantl, vsk, t.p.northover
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D66953
llvm-svn: 374033
Based on the discussion in
http://lists.llvm.org/pipermail/llvm-dev/2019-October/135574.html, the
conclusion was reached that the ARM backend should produce vcmp instead
of vcmpe instructions by default, i.e. not be producing an Invalid
Operation exception when either arguments in a floating point compare
are quiet NaNs.
In the future, after constrained floating point intrinsics for floating
point compare have been introduced, vcmpe instructions probably should
be produced for those intrinsics - depending on the exact semantics
they'll be defined to have.
This patch logically consists of the following parts:
- Revert http://llvm.org/viewvc/llvm-project?rev=294945&view=rev and
http://llvm.org/viewvc/llvm-project?rev=294968&view=rev, which
implemented fine-tuning for when to produce vcmpe (i.e. not do it for
equality comparisons). The complexity introduced by those patches
isn't needed anymore if we just always produce vcmp instead. Maybe
these patches need to be reintroduced again once support is needed to
map potential LLVM-IR constrained floating point compare intrinsics to
the ARM instruction set.
- Simply select vcmp, instead of vcmpe, see simple changes in
lib/Target/ARM/ARMInstrVFP.td
- Adapt lots of tests that tested for vcmpe (instead of vcmp). For all
of these test, the intent of what is tested for isn't related to
whether the vcmp should produce an Invalid Operation exception or not.
Fixes PR43374.
Differential Revision: https://reviews.llvm.org/D68463
llvm-svn: 374025
Identity shuffles, of the form (0, 1, 2, 3, ...) are perfectly OK under MVE
(they essentially just become bitcasts). We were not catching that in the
existing set of what we considered legal though. On NEON, they would be covered
by vext's, but that is not generally available in MVE.
This uses ShuffleVectorInst::isIdentityMask which is a little odd to use here
but does what we want and prevents us from just rewriting what is the same
function.
Differential Revision: https://reviews.llvm.org/D68241
llvm-svn: 373446
Replace with the MachineFunction. X86 is the only user, and only uses
it for the function. This removes one obstacle from using this in
GlobalISel. The other is the more tolerable EVT argument.
The X86 use of the function seems questionable to me. It checks hasFP,
before frame lowering.
llvm-svn: 373292
During legalisation we can end up with some pretty strange nodes, like shifts
of 0. We need to make sure we don't try to make long shifts of these, ending up
with invalid assembly instructions. A long shift with a zero immediate actually
encodes a shift by 32.
Differential Revision: https://reviews.llvm.org/D67664
llvm-svn: 372839
Similar to rL372717, we can force the splitting of extends of vector loads in
MVE, in order to use the better widening loads as opposed to going through
expensive extends. This adds a combine to early-on detect extends of loads and
split the load in two, from where normal legalisation will kick in and we get a
series of widening loads.
Differential Revision: https://reviews.llvm.org/D67909
llvm-svn: 372721
MVE does not have a simple sign extend instruction that can move elements
across lanes. We currently often end up moving each lane into and out of a GPR,
in order to get elements into the correct places. When we have a store of a
trunc (or a extend of a load), we can instead just split the store/load in two,
using the narrowing/widening load/store instructions from each half of the
vector.
This does that for stores. It happens very early in a store combine, so as to
easily detect the truncates. (It would be possible to do this later, but that
would involve looking through a buildvector of extract elements. Not impossible
but this way seemed simpler).
By enabling store combines we also get a vmovdrr combine for free, helping some
other tests.
Differential Revision: https://reviews.llvm.org/D67828
llvm-svn: 372717
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
We needn't BFI each lane individually into a predicate register when each lane
in the same. A simple sign extend and a vmsr will do.
Differential Revision: https://reviews.llvm.org/D67653
llvm-svn: 372313
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
* Reordered MVT simple types to group scalable vector types
together.
* New range functions in MachineValueType.h to only iterate over
the fixed-length int/fp vector types.
* Stopped backends which don't support scalable vector types from
iterating over scalable types.
Reviewers: sdesmalen, greened
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D66339
llvm-svn: 372099
The adds some very basic folding of PREDICATE_CASTS, removing cases when they
are chained together. These would already be removed eventually, as these are
lowered to copies. This just allows it to happen earlier, which can help other
simplifications.
Differential Revision: https://reviews.llvm.org/D67591
llvm-svn: 372012
Lower CTTZ on MVE using VBRSR and VCLS which will reverse the bits and
count the leading zeros, equivalent to a count trailing zeros (CTTZ).
llvm-svn: 372000
Masked loads and store fit naturally with MVE, the instructions being easily
predicated. This adds lowering for the simple cases of masked loads and stores.
It does not yet deal with widening/narrowing or pre/post inc, and so is
currently behind an option.
The llvm masked load intrinsic will accept a "passthru" value, dictating the
values used for the zero masked lanes. In MVE the instructions write 0 to the
zero predicated lanes, so we need to match a passthru that isn't 0 (or undef)
with a select instruction to pull in the correct data after the load.
Differential Revision: https://reviews.llvm.org/D67186
llvm-svn: 371932
This patch adds vecreduce_smax, vecredude_umax, vecreduce_smin, vecreduce_umin and selection for vmaxv and minv.
Differential Revision: https://reviews.llvm.org/D66413
llvm-svn: 371827
These predicate vectors can usually be loaded and stored with a single
instruction, a VSTR_P0. However this instruction will store the entire P0
predicate, 16 bits, zeroextended to 32bits. Each lane of the the
v4i1/v8i1/v16i1 representing 4/2/1 bits.
As far as I understand, when llvm says "store this v4i1", it really does need
to store 4 bits (or 8, that being the size of a byte, with this bottom 4 as the
interesting bits). For example a bitcast from a v8i1 to a i8 is defined as a
store followed by a load, which is how the code is expanded.
So this instead lowers the v4i1/v8i1 load/store through some shuffles to get
the bits into the correct positions. This, as you might imagine, is not as
efficient as a single instruction. But I believe it is needed for correctness.
v16i1 equally should not load/store 32bits, only storing the 16bits of data.
Stack loads/stores are still using the VSTR_P0 (as can be seen by the test not
changing). This is fine as they are self-consistent, it is only "externally
observable loads/stores" (from our point of view) that need to be corrected.
Differential revision: https://reviews.llvm.org/D67085
llvm-svn: 371419
This patch sinks add/mul(shufflevector(insertelement())) into the basic block in which they are used so that they can then be selected together.
This is useful for various MVE instructions, such as vmla and others that take R registers.
Loop tests have been added to the vmla test file to make sure vmlas are generated in loops.
Differential revision: https://reviews.llvm.org/D66295
llvm-svn: 371218
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: jyknight, sdardis, nemanjai, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67229
llvm-svn: 371200
A number of inline assembly constraints are currently supported by LLVM, but rejected as invalid by Clang:
Target independent constraints:
s: An integer constant, but allowing only relocatable values
ARM specific constraints:
j: An immediate integer between 0 and 65535 (valid for MOVW)
x: A 32, 64, or 128-bit floating-point/SIMD register: s0-s15, d0-d7, or q0-q3
N: An immediate integer between 0 and 31 (Thumb1 only)
O: An immediate integer which is a multiple of 4 between -508 and 508. (Thumb1 only)
This patch adds support to Clang for the missing constraints along with some checks to ensure that the constraints are used with the correct target and Thumb mode, and that immediates are within valid ranges (at least where possible). The constraints are already implemented in LLVM, but just a couple of minor corrections to checks (V8M Baseline includes MOVW so should work with 'j', 'N' and 'O' shouldn't be valid in Thumb2) so that Clang and LLVM are in line with each other and the documentation.
Differential Revision: https://reviews.llvm.org/D65863
Change-Id: I18076619e319bac35fbb60f590c069145c9d9a0a
llvm-svn: 371079
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:
- `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
- `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
- `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,
Reviewers: lattner, thegameg, courbet
Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65945
llvm-svn: 371045
This moves ConstantMaterializationCost into ARMBaseInstrInfo so that it can
also be used in ISel Lowering, adding codesize values to the computed costs, to
be able to compare either approximate instruction counts or codesize costs.
It also adds a HasLowerConstantMaterializationCost, which compares the
ConstantMaterializationCost of two values, returning true if the first is
smaller either in instruction count/codesize, or falling back to the other in
the case that they are equal.
This is used in constant CSEL lowering to invert the predicate if the opposite
is easier to materialise.
Differential revision: https://reviews.llvm.org/D66701
llvm-svn: 370741
Arm 8.1-M adds a number of related CSEL instructions, including CSINC, CSNEG and CSINV. These choose between two values given the content in CPSR and a condition, performing an increment, negation or inverse of the false value.
This adds some selection for them, either from constant values or patterns. It does not include CSEL directly, which is currently not always making code better. It is still useful, but we will have to check more carefully where it should and shouldn't be used.
Code by Ranjeet Singh and Simon Tatham, with some modifications from me.
Differential revision: https://reviews.llvm.org/D66483
llvm-svn: 370739
We should be using MQPR, and if we don't we can get COPYs and PHIs created for
QPR. These get folded into instructions, failing verification checks.
Differential revision: https://reviews.llvm.org/D66214
llvm-svn: 370676
These were never enabled correctly and are causing other problems. Taking them
out for the moment, whilst we work on the issues.
This reverts r370329.
llvm-svn: 370607
Masked loads and store fit naturally with MVE, the instructions being easily
predicated. This adds lowering for the simple cases of masked loads and stores.
It does not yet deal with widening/narrowing or pre/post inc.
The llvm masked load intrinsic will accept a "passthru" value, dictating the
values used for the zero masked lanes. In MVE the instructions write 0 to the
zero predicated lanes, so we need to match a passthru that isn't 0 (or undef)
with a select instruction to pull in the correct data after the load.
We also need to do something with unaligned loads/stores. Currently this uses a
similar method used in big endian, using an VLDRB.8 (and potentially a VREV in
BE). This does mean that the predicate mask is converted from, for example, a
v4i1 to a v16i1. The VLDR instructions are defined as using the first bit of
the relevant mask lane, so this could potentially load different results if the
predicate is little odd. As the input is a v4i1 however, I believe this is OK
and all the bits required should be set in the predicate, making the VLDRB.8
load the same data.
Differential Revision: https://reviews.llvm.org/D66534
llvm-svn: 370329
The patch fixed the issue that RV64 didn't clear the upper bits
when return complex floating value with lp64 ABI.
float _Complex
complex_add(float _Complex a, float _Complex b)
{
return a + b;
}
RealResult = zero_extend(RealA + RealB)
ImageResult = ImageA + ImageB
Return (RealResult | (ImageResult << 32))
The patch introduces shouldExtendTypeInLibCall target hook to suppress
the AssertZext generation when lowering floating LibCall.
Thanks to Eli's comments from the Bugzilla
https://bugs.llvm.org/show_bug.cgi?id=42820
Differential Revision: https://reviews.llvm.org/D65497
llvm-svn: 370275
Summary: There are at least 2 ways to express the same shuffle. Various pieces of code explicit check for both option, but other places do not when they would benefit from doing it. This patches refactor the codebase to use buildLegalVectorShuffle in order to make that behavior more consistent.
Reviewers: craig.topper, efriedma, RKSimon, lebedev.ri
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66804
llvm-svn: 370190
The CodeGen/Thumb2/mve-vaddv.ll test needed to be amended to reflect the
changes from the above patch.
This reverts commit cd53ff6, reapplying 7c6b229.
llvm-svn: 369638
It broke the bots, see e.g. http://lab.llvm.org:8011/builders/clang-cuda-build/builds/36275/
> This patch fixes shifts by a 128/256 bit shift amount. It also fixes
> codegen for shifts of 32 by delegating to LLVM's default optimisation
> instead of emitting a long shift.
>
> Tests that used to generate long shifts of 32 are updated to check for the
> more optimised codegen.
>
> Differential revision: https://reviews.llvm.org/D66519
>
> llvm-svn: 369626
llvm-svn: 369636
This patch fixes shifts by a 128/256 bit shift amount. It also fixes
codegen for shifts of 32 by delegating to LLVM's default optimisation
instead of emitting a long shift.
Tests that used to generate long shifts of 32 are updated to check for the
more optimised codegen.
Differential revision: https://reviews.llvm.org/D66519
llvm-svn: 369626
The patch introduces MakeLibCallOptions struct as suggested by @efriedma on D65497.
The struct contain argument flags which will pass to makeLibCall function.
The patch should not has any functionality changes.
Differential Revision: https://reviews.llvm.org/D65795
llvm-svn: 369622
This patch adds vecreduce_add and the relevant instruction selection for
vaddv.
Differential revision: https://reviews.llvm.org/D66085
llvm-svn: 369245
Push LR register before calling __gnu_mcount_nc as it expects the value of LR register to be the top value of
the stack on ARM32.
Differential Revision: https://reviews.llvm.org/D65019
llvm-svn: 369147
We don't yet know how to generate these instructions for MVE. And in the case
of VLD3, we don't even have the instruction. For the moment don't tell the
vectoriser that we have VLD4, just to end up serialising the results.
Differential Revision: https://reviews.llvm.org/D66009
llvm-svn: 369101
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
This adds pre- and post- increment and decrements for MVE loads and stores. It
uses the builtin pre and post load/store detection, unlike Neon. Loads are
selected with the code in tryT2IndexedLoad, stores are selected with tablegen
patterns. The immediates have a +/-7bit range, multiplied by the size of the
element.
Differential Revision: https://reviews.llvm.org/D63840
llvm-svn: 368305
This adds some missing patterns for big endian loads/stores, allowing unaligned
loads/stores to also be selected with an extra VREV, which produces better code
than aligning through a stack. Also moves VLDR_P0 to not be LE only, and
adjusts some of the tests to show all that working.
Differential Revision: https://reviews.llvm.org/D65583
llvm-svn: 368304
VLDRH needs to have an alignment of at least 2, including the
widening/narrowing versions. This tightens up the ISel patterns for it and
alters allowsMisalignedMemoryAccesses so that unaligned accesses are expanded
through the stack. It also fixed some incorrect shift amounts, which seemed to
be passing a multiple not a shift.
Differential Revision: https://reviews.llvm.org/D65580
llvm-svn: 368256
Summary:
This is patch is part of a serie to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, jfb, jakehehrlich
Reviewed By: jfb
Subscribers: wuzish, jholewinski, arsenm, dschuff, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65514
llvm-svn: 367828
This is extremely specific, but saves three instructions when it's
legal. I don't think the code can be usefully generalized.
Differential Revision: https://reviews.llvm.org/D65351
llvm-svn: 367492
Thumb1 has very limited immediate modes, so turning an "and" into a
shift can save multiple instructions.
It's possible to simplify the generated code for test2 and test3 in
cmp-and-fold.ll a little more, but I'll implement that as a followup.
Differential Revision: https://reviews.llvm.org/D65175
llvm-svn: 367491
These are some better patterns for converting between predicates and floating
points. Much like the extends, we select "1"/"-1" or "0" depending on the
predicate value. Or we perform a compare against 0 to convert to a predicate.
Differential Revision: https://reviews.llvm.org/D65103
llvm-svn: 367191
This removes the VCEQ/VCNE/VCGE/VCEQZ/etc nodes, just using two called VCMP and
VCMPZ with an extra operand as the condition code. I believe this will make
some combines simpler, allowing us to just look at these codes and not the
operands. It also helps fill in a missing VCGTUZ MVE selection without adding
extra nodes for it.
Differential Revision: https://reviews.llvm.org/D65072
llvm-svn: 366934
The prevents us from trying to convert an i1 predicate vector to a float, or
vice-versa. Better patterns are possible, which will follow in a subsequent
commit. For now we just expand them.
Differential Revision: https://reviews.llvm.org/D65066
llvm-svn: 366931
This adds a DeMorgan combine for OR's of compares to turn them into AND's,
helping prevent them from going into and out of gpr registers. It also fills in
the VCLE and VCLT nodes that MVE can select, allowing it to invert more
compares.
Differential Revision: https://reviews.llvm.org/D65059
llvm-svn: 366920
Much like integers, this adds MVE floating point compares and select. It
requires a lot more buildvector/shuffle code because we may need to expand the
compares without mve.fp, and requires support for and/or because of the way we
lower llvm condition codes.
Some original code by David Sherwood
Differential Revision: https://reviews.llvm.org/D65054
llvm-svn: 366909
This adds support code for building and shuffling i1 predicate registers. It
generally uses two basic principles, either converting the predicate into an
scalar (through a PREDICATE_CAST) and doing scalar operations on it there, or
by converting the register to an full vector register and back.
Some of the code here is a not super efficient but will hopefully cover most
cases of moving i1 vectors around and can be improved in subsequent patches.
Some code by David Sherwood.
Differential Revision: https://reviews.llvm.org/D65052
llvm-svn: 366890
This adds the very basics for MVE vector predication, adding integer VCMP and
VSEL instruction support. This is done through predicate registers (MVT::v16i1,
MVT::v8i1, MVT::v4i1), but otherwise using same mechanics as NEON to custom
lower setcc's through ARMISD::VCXX nodes (VCEQ, VCGT, VCEQZ, etc).
An extra VCNE was added, as this can be handled sensibly by MVE's expanded
number of VCMP condition codes. (There are also VCLE and VCLT which are added
later).
VPSEL is also added here, simply selecting on the vselect.
Original code by David Sherwood.
Differential Revision: https://reviews.llvm.org/D65051
llvm-svn: 366885
While lowering test.set.loop.iterations, it wasn't checked how the
brcond was using the result and so the wls could branch to the loop
preheader instead of not entering it. The same was true for
loop.decrement.reg.
So brcond and br_cc and now lowered manually when using the hwloop
intrinsics. During this we now check whether the result has been
negated and whether we're using SETEQ or SETNE and 0 or 1. We can
then figure out which basic block the WLS and LE should be targeting.
Differential Revision: https://reviews.llvm.org/D64616
llvm-svn: 366809
ARM has code to recognise uses of the "returned" function parameter
attribute which guarantee that the value passed to the function in r0
will be returned in r0 unmodified. IPRA replaces the regmask on call
instructions, so needs to be told about this to avoid reverting the
optimisation.
Differential revision: https://reviews.llvm.org/D64986
llvm-svn: 366669
Summary:
PerformVMOVRRDCombine ommits adding a offset
of 4 to the PointerInfo, when converting a
f64 = load[M]
to
{i32, i32} = {load[M], load[M + 4]}
Which would allow the machine scheduller
to break dependencies with the second load.
- pr42638
Reviewers: eli.friedman, dmgreen, ostannard
Reviewed By: ostannard
Subscribers: ostannard, javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64870
llvm-svn: 366423
We need to make sure that we are sensibly dealing with vectors of types v2i64
and v2f64, even if most of the time we cannot generate native operations for
them. This mostly adds a lot of testing, plus fixes up a couple of the issues
found. And, or and xor can be legal for v2i64, and shifts combining needs a
slight fixup.
Differential Revision: https://reviews.llvm.org/D64316
llvm-svn: 366106
This adds basic lowering for MVE shifts. There are many shifts in MVE, but the
instructions handled here are:
VSHL (imm)
VSHRu (imm)
VSHRs (imm)
VSHL (vector)
VSHL (register)
MVE, like NEON before it, doesn't have shift right by a vector (or register).
We instead have to negate the amount and shift in the opposite direction. This
means we have to convert any SHR's into a form of SHL (that is still signed or
unsigned) with a negated condition and selecting from there. MVE still does
have shifting by an immediate for SHL, ASR and LSR.
This adds lowering for these and for register forms, which work well for shift
lefts but may require an extra fold of neg(vdup(x)) -> vdup(neg(x)) to potentially
work optimally for right shifts.
Differential Revision: https://reviews.llvm.org/D64212
llvm-svn: 366056
This adjusts the way that we lower NEON shifts to use a DAG target node, not
via a neon intrinsic. This is useful for handling MVE shifts operations in the
same the way. It also renames some of the immediate shift nodes for
consistency, and moves some of the processing of immediate shifts into
LowerShift allowing it to capture more cases.
Differential Revision: https://reviews.llvm.org/D64426
llvm-svn: 366051
The vmovlb instructions can be uses to sign or zero extend vector registers
between types. This adds some patterns for them and relevant testing. The
VBICIMM generation is also put behind a hasNEON check (as is already done for
VORRIMM).
Code originally by David Sherwood.
Differential Revision: https://reviews.llvm.org/D64069
llvm-svn: 366008
This simply makes the MVE integer min and max instructions legal and adds the
relevant patterns for them.
Differential Revision: https://reviews.llvm.org/D64026
llvm-svn: 366004
This adds support for the floor/ceil/trunc/... series of instructions,
converting to various forms of VRINT. They use the same suffixes as their
floating point counterparts. There is not VTINTR, so nearbyint is expanded.
Also added a copysign test, to show it is expanded.
Differential Revision: https://reviews.llvm.org/D63985
llvm-svn: 366003
This adds the patterns for minnm and maxnm from the fminnum and fmaxnum nodes,
similar to scalar types.
Original patch by Simon Tatham
Differential Revision: https://reviews.llvm.org/D63870
llvm-svn: 366002
This patch addresses a couple of problems:
1) The maximum supported offset of LE is -4094.
2) The offset of WLS also needs to be checked, this uses a
maximum positive offset of 4094.
The use of BasicBlockUtils has been changed because the block offsets
weren't being initialised, but the isBBInRange checks both positive
and negative offsets.
ARMISelLowering has been tweaked because the test case presented
another pattern that we weren't supporting.
llvm-svn: 365749
This adds some handling for VMOVimm, using the same method that NEON uses. We
create VMOVIMM/VMVNIMM/VMOVFPIMM nodes based on the immediate, and select them
using the now renamed ARMvmovImm/etc. There is also an extra 64bit immediate
mode that I have not yet added here.
Code by David Sherwood
Differential Revision: https://reviews.llvm.org/D63884
llvm-svn: 365178
The arm condition codes for GE is N==V (and for LT is N!=V). If the source of
flags cannot set V (overflow), such as a cmp against #0, then we can use the
simpler PL and MI conditions that only check N. As these PL/MI conditions are
simpler than GE/LT, other passes like the peephole optimiser can have a better
time optimising away the redundant CMPs.
The exception is the VSEL instruction, which cannot take the PL code, so there
the transform favours GE.
Differential Revision: https://reviews.llvm.org/D64160
llvm-svn: 365117
Summary:
This is the backend part of [[ https://bugs.llvm.org/show_bug.cgi?id=42457 | PR42457 ]].
In middle-end, we'd want to prefer the form with two adds - D63992,
but as this diff shows, not every target will prefer that pattern.
Out of 4 targets for which i added tests all seem to be ok with inc-of-add for scalars,
but only X86 prefer that same pattern for vectors.
Here i'm adding a new TLI hook, always defaulting to the inc-of-add,
but adding AArch64,ARM,PowerPC overrides to prefer inc-of-add only for scalars.
Reviewers: spatel, RKSimon, efriedma, t.p.northover, hfinkel
Reviewed By: efriedma
Subscribers: nemanjai, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64090
llvm-svn: 365010
Passing a vector type over the soft-float ABI involves it being split
into four GPRs, so the first thing that has to happen at the start of
the function is to recombine those into a vector register. The ABI
types all vectors as v2f64, so we need to support BUILD_VECTOR for
that type, which I do in this patch by allowing it to be expanded in
terms of INSERT_VECTOR_ELT, and writing an ISel pattern for that in
turn. Similarly, I provide a rule for EXTRACT_VECTOR_ELT so that a
returned vector can be marshalled back into GPRs.
While I'm here, I've also added ISD::UNDEF to the list of operations
we turn back on in `setAllExpand`, because I noticed that otherwise it
gets expanded into a BUILD_VECTOR with explicit zero inputs, leading
to pointless machine instructions to zero out a vector register that's
about to have every lane overwritten of in any case.
Reviewers: dmgreen, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63937
llvm-svn: 364910
If you compile with `-mattr=+mve` (enabling integer MVE instructions
but not floating-point ones), then the scalar FP //registers// exist
and it's legal to move things in and out of them, load and store them,
but it's not legal to do arithmetic on them.
In D60708, the calls to `addRegisterClass` in ARMISelLowering that
enable use of the scalar FP registers became conditionalised on
`Subtarget->hasFPRegs()` instead of `Subtarget->hasVFP2Base()`, so
that loads, stores and moves of those registers would work. But I
didn't realise that that would also enable all the operations on those
types by default.
Now, if the target doesn't have basic VFP, we follow up those
`addRegisterClass` calls by turning back off all the nontrivial
operations you can perform on f32 and f64. That causes several
knock-on failures, which are fixed by allowing the `VMOVDcc` and
`VMOVScc` instructions to be selected even if all you have is
`HasFPRegs`, and adjusting several checks for 'is this a double in a
single-precision-only world?' to the more general 'is this any FP type
we can't do arithmetic on?'. Between those, the whole of the
`float-ops.ll` and `fp16-instructions.ll` tests can now run in
MVE-without-FP mode and generate correct-looking code.
One odd side effect is that I had to relax the check lines in that
test so that they permit test functions like `add_f` to be generated
as tailcalls to software FP library functions, instead of ordinary
calls. Doing that is entirely legal, but the mystery is why this is
the first RUN line that's needed the relaxation: on the usual kind of
non-FP target, no tailcalls ever seem to be generated. Going by the
llc messages, I think `SoftenFloatResult` must be perturbing the code
generation in some way, but that's as much as I can guess.
Reviewers: dmgreen, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63938
llvm-svn: 364909
Backend changes to enable WLS/LE low-overhead loops for armv8.1-m:
1) Use TTI to communicate to the HardwareLoop pass that we should try
to generate intrinsics that guard the loop entry, as well as setting
the loop trip count.
2) Lower the BRCOND that uses said intrinsic to an Arm specific node:
ARMWLS.
3) ISelDAGToDAG the node to a new pseudo instruction:
t2WhileLoopStart.
4) Add support in ArmLowOverheadLoops to handle the new pseudo
instruction.
Differential Revision: https://reviews.llvm.org/D63816
llvm-svn: 364733
MVE adds the lsll, lsrl and asrl instructions, which perform a shift on a 64 bit value separated into two 32 bit registers.
The Expand64BitShift function is modified to accept ISD::SHL, ISD::SRL and ISD::SRA and convert it into the appropriate opcode in ARMISD. An SHL is converted into an lsll, an SRL is converted into an lsrl for the immediate form and a negation and lsll for the register form, and SRA is converted into an asrl.
test/CodeGen/ARM/shift_parts.ll is added to test the logic of emitting these instructions.
Differential Revision: https://reviews.llvm.org/D63430
llvm-svn: 364654
This adds handling and tests for a number of floating point math routines,
which have no MVE instructions.
Differential Revision: https://reviews.llvm.org/D63725
llvm-svn: 364641
MVE has instructions to widen as it loads, and narrow as it stores. This adds
the required patterns and legalisation to make them work including specifying
that they are legal, patterns to select them and test changes.
Patch by David Sherwood.
Differential Revision: https://reviews.llvm.org/D63839
llvm-svn: 364636
This fills in the gaps for basic MVE loads and stores, allowing unaligned
access and adding far too many tests. These will become important as
narrowing/expanding and pre/post inc are added. Big endian might still not be
handled very well, because we have not yet added bitcasts (and I'm not sure how
we want it to work yet). I've included the alignment code anyway which maps
with our current patterns. We plan to return to that later.
Code written by Simon Tatham, with additional tests from Me and Mikhail Maltsev.
Differential Revision: https://reviews.llvm.org/D63838
llvm-svn: 364633
We don't have vector operations for these, so they need to be expanded for both
integer and float.
Differential Revision: https://reviews.llvm.org/D63595
llvm-svn: 364631
This patch adds necessary shuffle vector and buildvector support for ARM MVE.
It essentially adds support for VDUP, VREVs and some VMOVs, which are often
required by other code (like upcoming patches).
This mostly uses the same code from Neon that already generated
NEONvdup/NEONvduplane/NEONvrev's. These have been renamed to ARMvdup/etc and
moved to ARMInstrInfo as they are common to both architectures. Most of the
selection code seems to be applicable to both, but NEON does have some more
instructions making some parts specific.
Most code originally by David Sherwood.
Differential Revision: https://reviews.llvm.org/D63567
llvm-svn: 364626
David Green