Precursor to D100944. The logic for determining the unique ID had become
quite difficult to reason about, so I have factored this out into a
separate function.
Differential Revision: https://reviews.llvm.org/D102336
- When memory intrinsics, such as memcpy, the attached scoped AA
metadata is not passed down to the backend. As a result, the backend
cannot schedule relevant memory operations around them following that
hint. In this patch, SelectionDAG is enhanced to propagate that
metadata (scoped AA only) when they are lowered into loads and stores.
Differential Revision: https://reviews.llvm.org/D102215
The findLoopPreheader function will currently not find a preheader if it
branches to multiple different loop headers. This patch adds an option
to relax that, allowing ARMLowOverheadLoops to process more loops
successfully. This helps with WhileLoopStart setup instructions that can
branch/fallthrough to the low overhead loop and to branch to a separate
loop from the same preheader (but I don't believe it is possible for
both loops to be low overhead loops).
Differential Revision: https://reviews.llvm.org/D102747
This makes it possible for targets to define their own MCObjectFileInfo.
This MCObjectFileInfo is then used to determine things like section alignment.
This is a follow up to D101462 and prepares for the RISCV backend defining the
text section alignment depending on the enabled extensions.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101921
D29668 enabled to avoid a useless copy of the argument value into an alloca if the caller places it in memory (as it often happens on x86) by directly forwarding the pointer to it. This optimization is illegal if the type contains padding bytes: if a truncating store into the alloca is replaced the upper bits are filled with garbage and produce code misbehaving at runtime.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D102153
D88631 added initial support for:
- -mstack-protector-guard=
- -mstack-protector-guard-reg=
- -mstack-protector-guard-offset=
flags, and D100919 extended these to AArch64. Unfortunately, these flags
aren't retained for LTO. Make them module attributes rather than
TargetOptions.
Link: https://github.com/ClangBuiltLinux/linux/issues/1378
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D102742
SelectionDAG forces us to have a weird ABI for 16-bit values without
legal 16-bit operations, but currently GlobalISel bypasses this and
sometimes ends up using the gfx8+ ABI in some contexts. Make sure
we're testing the normal ABI to avoid a test change in a future patch.
This reapplies c0f3dfb9, which was reverted following the discovery of
crashes on linux kernel and chromium builds - these issues have since
been fixed, allowing this patch to re-land.
This reverts commit 4397b7095d.
The function `reduceOperationWidth` helps to legalize a vector
operation either by narrowing its type or by scalarizing the
operation itself. It currently supports instructions with one result.
This patch, in addition allows the same for instructions with two
results (for instance, G_SDIVREM).
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D100725
Previously APFloat::convertToDouble may be called only for APFloats that
were built using double semantics. Other semantics like single precision
were not allowed although corresponding numbers could be converted to
double without loss of precision. The similar restriction applied to
APFloat::convertToFloat.
With this change any APFloat that can be precisely represented by double
can be handled with convertToDouble. Behavior of convertToFloat was
updated similarly. It make the conversion operations more convenient and
adds support for formats like half and bfloat.
Differential Revision: https://reviews.llvm.org/D102671
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Re-landed with correct handling in ComputeNumSignBits for Tmp == VTBits,
where zero-extending atomics were incorrectly returning 0 rather than
the (slightly confusing) required return value of 1.
Re-landed again after D102819 fixed PowerPC to correctly zero-extend all
of its atomics as it claimed to do, since the combination of that bug
and this optimisation caused buildbot regressions.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
The use of `SelectionDAG::getSplatValue` isn't guaranteed to return a
type-legal splat value as it may implicitly extract a vector element
from another shuffle. It is not permitted to introduce an illegal type
when lowering shuffles.
This patch addresses the crash by adding a boolean flag to
`getSplatValue`, defaulting to false, which when set will ensure a
type-legal return value. If it is unable to do that it will fail to
return a splat value.
I've been through the existing uses of `getSplatValue` in other targets
and was unable to find a need or test cases showing a need to update
their uses. In some cases, the call is made during `LegalizeVectorOps`
which may still produce illegal scalar types. In other situations, the
illegally-typed splat value may be quickly patched up to a legal type
(such as any-extending the returned `extract_vector_elt` up to a legal
type) before `LegalizeDAG` notices.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102687
Currently, variadic dbg.values (i.e. those using a DIArgList as part of
their location) are not handled properly by FastISel or GlobalISel, and
will produce invalid DBG_VALUE instructions if they encounter them. This
patch fixes this issue by emitting undef DBG_VALUE instructions for
variadic dbg.values, so that no incorrect instruction is produced and
any prior variable location is terminated.
This is simply a quick-fix to prevent errors; a correct implementation
should come later for these ISel pipelines to ensure that we do not drop
debug information unnecessarily.
Differential Revision: https://reviews.llvm.org/D102500
When trying to return a type such as <vscale x 1 x i32> from a
function we crash in DAGTypeLegalizer::WidenVecRes_EXTRACT_SUBVECTOR
when attempting to get the fixed number of elements in the vector.
For the simple case we are dealing with, i.e. extracting
<vscale x 1 x i32> from index 0 of input vector <vscale x 4 x i32>
we can simply rely upon existing code that just returns the input.
Differential Revision: https://reviews.llvm.org/D102605
When attempting to return something like a <vscale x 1 x i32>
type from a function we end up trying to widen the vector by
inserting a <vscale x 1 x i32> subvector into an undefined
<vscale x 4 x i32> vector. However, during legalisation we
then attempt to widen the INSERT_SUBVECTOR operands and hit
an error in WidenVectorOperand.
This patch adds a new WidenVecOp_INSERT_SUBVECTOR function
that currently only supports inserting subvectors into undefined
vectors.
Differential Revision: https://reviews.llvm.org/D102501
The operation of some VP intrinsics do/will not map to regular
instruction opcodes. Returning 'None' seems more intuitive here than
'Instruction::Call'.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D102778
- This patch (is one in a series of patches) which introduces HLASM Parser support (for the first parameter of inline asm statements) to LLVM ([[ https://lists.llvm.org/pipermail/llvm-dev/2021-January/147686.html | main RFC here ]])
- This patch in particular introduces HLASM Parser support for Z machine instructions.
- The approach taken here was to subclass `AsmParser`, and make various functions and variables as "protected" wherever appropriate.
- The `HLASMAsmParser` class overrides the `parseStatement` function. Two new private functions `parseAsHLASMLabel` and `parseAsMachineInstruction` are introduced as well.
The general syntax is laid out as follows (more information available in [[ https://www.ibm.com/support/knowledgecenter/SSENW6_1.6.0/com.ibm.hlasm.v1r6.asm/asmr1023.pdf | HLASM V1R6 Language Reference Manual ]] - Chapter 2 - Instruction Statement Format):
```
<TokA><spaces.*><TokB><spaces.*><TokC><spaces.*><TokD>
```
1. TokA is referred to as the Name Entry. This token is optional
2. TokB is referred to as the Operation Entry. This token is mandatory.
3. TokC is referred to as the Operand Entry. This token is mandatory
4. TokD is referred to as the Remarks Entry. This token is optional
- If TokA is provided, then we either parse TokA as a possible comment or as a label (Name Entry), Tok B as the Operation Entry and so on.
- If TokA is not provided (i.e. we have one or more spaces and then the first token), then we will parse the first token (i.e TokB) as a possible Z machine instruction, TokC as the operands to the Z machine instruction and TokD as a possible Remark field
- TokC (Operand Entry), no spaces are allowed between OperandEntries. If a space occurs it is classified as an error.
- TokD if provided is taken as is, and emitted as a comment.
The following additional approach was examined, but not taken:
- Adding custom private only functions to base AsmParser class, and only invoking them for z/OS. While this would eliminate the need for another child class, these private functions would be of non-use to every other target. Similarly, adding any pure virtual functions to the base MCAsmParser class and overriding them in AsmParser would also have the same disadvantage.
Testing:
- This patch doesn't have tests added with it, for the sole reason that MCStreamer Support and Object File support hasn't been added for the z/OS target (yet). Hence, it's not possible generate code outright for the z/OS target. They are in the process of being committed / process of being worked on.
- Any comments / feedback on how to combat this "lack of testing" due to other missing required features is appreciated.
Reviewed By: Kai, uweigand
Differential Revision: https://reviews.llvm.org/D98276
This is a step towards relying more on node-level FMF rather than function-wide
or target settings.
I think it was just an oversight that we didn't get this path in D87361
or follow-on patches.
The lack of FMF propagation is blocking D90901 from converting tests to IR-level FMF.
We can't do much more than this currently because we also fail to propagate flags
from x86-specific node to generic FMA node. That would be another patch, so the
test just verifies that we can transfer from IR to initial SDAG node.
Differential Revision: https://reviews.llvm.org/D102725
This patch transforms the sequence
lea (reg1, reg2), reg3
sub reg3, reg4
to two sub instructions
sub reg1, reg4
sub reg2, reg4
Similar optimization can also be applied to LEA/ADD sequence.
The modifications to TwoAddressInstructionPass is to ensure the operands of ADD
instruction has expected order (the dest register of LEA should be src register
of ADD).
Differential Revision: https://reviews.llvm.org/D101970
This patch implements first part of Flow Sensitive SampleFDO (FSAFDO).
It has the following changes:
(1) disable current discriminator encoding scheme,
(2) new hierarchical discriminator for FSAFDO.
For this patch, option "-enable-fs-discriminator=true" turns on the new
functionality. Option "-enable-fs-discriminator=false" (the default)
keeps the current SampleFDO behavior. When the fs-discriminator is
enabled, we insert a flag variable, namely, llvm_fs_discriminator, to
the object. This symbol will checked by create_llvm_prof tool, and used
to generate a profile with FS-AFDO discriminators enabled. If this
happens, for an extbinary format profile, create_llvm_prof tool
will add a flag to profile summary section.
Differential Revision: https://reviews.llvm.org/D102246
For opaque pointers, we're trying to avoid uses of
PointerType::getElementType().
A couple of ISel places use PointerType::getElementType(). Some of these
are easy to fix by using ArgListEntry's indirect types.
The inalloca type wasn't stored there, as opposed to preallocated and
byval which have their indirect types available, so add it and use it.
This is a reland after an MSan fix in D102667.
Differential Revision: https://reviews.llvm.org/D101713
Currently all AA analyses marked as preserved are stateless, not taking
into account their dependent analyses. So there's no need to mark them
as preserved, they won't be invalidated unless their analyses are.
SCEVAAResults was the one exception to this, it was treated like a
typical analysis result. Make it like the others and don't invalidate
unless SCEV is invalidated.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D102032
Use existing KnownBits helpers from KnownBits.h to simplify G_ICMPs.
E.g.
x == x -> true
x != x -> false
load(x) > 1 -> true (when the load is known to be greater than 1)
And so on.
Differential Revision: https://reviews.llvm.org/D102542
This patch is the Part-1 (FE Clang) implementation of HW Exception handling.
This new feature adds the support of Hardware Exception for Microsoft Windows
SEH (Structured Exception Handling).
This is the first step of this project; only X86_64 target is enabled in this patch.
Compiler options:
For clang-cl.exe, the option is -EHa, the same as MSVC.
For clang.exe, the extra option is -fasync-exceptions,
plus -triple x86_64-windows -fexceptions and -fcxx-exceptions as usual.
NOTE:: Without the -EHa or -fasync-exceptions, this patch is a NO-DIFF change.
The rules for C code:
For C-code, one way (MSVC approach) to achieve SEH -EHa semantic is to follow
three rules:
* First, no exception can move in or out of _try region., i.e., no "potential
faulty instruction can be moved across _try boundary.
* Second, the order of exceptions for instructions 'directly' under a _try
must be preserved (not applied to those in callees).
* Finally, global states (local/global/heap variables) that can be read
outside of _try region must be updated in memory (not just in register)
before the subsequent exception occurs.
The impact to C++ code:
Although SEH is a feature for C code, -EHa does have a profound effect on C++
side. When a C++ function (in the same compilation unit with option -EHa ) is
called by a SEH C function, a hardware exception occurs in C++ code can also
be handled properly by an upstream SEH _try-handler or a C++ catch(...).
As such, when that happens in the middle of an object's life scope, the dtor
must be invoked the same way as C++ Synchronous Exception during unwinding
process.
Design:
A natural way to achieve the rules above in LLVM today is to allow an EH edge
added on memory/computation instruction (previous iload/istore idea) so that
exception path is modeled in Flow graph preciously. However, tracking every
single memory instruction and potential faulty instruction can create many
Invokes, complicate flow graph and possibly result in negative performance
impact for downstream optimization and code generation. Making all
optimizations be aware of the new semantic is also substantial.
This design does not intend to model exception path at instruction level.
Instead, the proposed design tracks and reports EH state at BLOCK-level to
reduce the complexity of flow graph and minimize the performance-impact on CPP
code under -EHa option.
One key element of this design is the ability to compute State number at
block-level. Our algorithm is based on the following rationales:
A _try scope is always a SEME (Single Entry Multiple Exits) region as jumping
into a _try is not allowed. The single entry must start with a seh_try_begin()
invoke with a correct State number that is the initial state of the SEME.
Through control-flow, state number is propagated into all blocks. Side exits
marked by seh_try_end() will unwind to parent state based on existing
SEHUnwindMap[].
Note side exits can ONLY jump into parent scopes (lower state number).
Thus, when a block succeeds various states from its predecessors, the lowest
State triumphs others. If some exits flow to unreachable, propagation on those
paths terminate, not affecting remaining blocks.
For CPP code, object lifetime region is usually a SEME as SEH _try.
However there is one rare exception: jumping into a lifetime that has Dtor but
has no Ctor is warned, but allowed:
Warning: jump bypasses variable with a non-trivial destructor
In that case, the region is actually a MEME (multiple entry multiple exits).
Our solution is to inject a eha_scope_begin() invoke in the side entry block to
ensure a correct State.
Implementation:
Part-1: Clang implementation described below.
Two intrinsic are created to track CPP object scopes; eha_scope_begin() and eha_scope_end().
_scope_begin() is immediately added after ctor() is called and EHStack is pushed.
So it must be an invoke, not a call. With that it's also guaranteed an
EH-cleanup-pad is created regardless whether there exists a call in this scope.
_scope_end is added before dtor(). These two intrinsics make the computation of
Block-State possible in downstream code gen pass, even in the presence of
ctor/dtor inlining.
Two intrinsic, seh_try_begin() and seh_try_end(), are added for C-code to mark
_try boundary and to prevent from exceptions being moved across _try boundary.
All memory instructions inside a _try are considered as 'volatile' to assure
2nd and 3rd rules for C-code above. This is a little sub-optimized. But it's
acceptable as the amount of code directly under _try is very small.
Part-2 (will be in Part-2 patch): LLVM implementation described below.
For both C++ & C-code, the state of each block is computed at the same place in
BE (WinEHPreparing pass) where all other EH tables/maps are calculated.
In addition to _scope_begin & _scope_end, the computation of block state also
rely on the existing State tracking code (UnwindMap and InvokeStateMap).
For both C++ & C-code, the state of each block with potential trap instruction
is marked and reported in DAG Instruction Selection pass, the same place where
the state for -EHsc (synchronous exceptions) is done.
If the first instruction in a reported block scope can trap, a Nop is injected
before this instruction. This nop is needed to accommodate LLVM Windows EH
implementation, in which the address in IPToState table is offset by +1.
(note the purpose of that is to ensure the return address of a call is in the
same scope as the call address.
The handler for catch(...) for -EHa must handle HW exception. So it is
'adjective' flag is reset (it cannot be IsStdDotDot (0x40) that only catches
C++ exceptions).
Suppress push/popTerminate() scope (from noexcept/noTHrow) so that HW
exceptions can be passed through.
Original llvm-dev [RFC] discussions can be found in these two threads below:
https://lists.llvm.org/pipermail/llvm-dev/2020-March/140541.htmlhttps://lists.llvm.org/pipermail/llvm-dev/2020-April/141338.html
Differential Revision: https://reviews.llvm.org/D80344/new/
Follow up to D88631 but for aarch64; the Linux kernel uses the command
line flags:
1. -mstack-protector-guard=sysreg
2. -mstack-protector-guard-reg=sp_el0
3. -mstack-protector-guard-offset=0
to use the system register sp_el0 for the stack canary, enabling the
kernel to have a unique stack canary per task (like a thread, but not
limited to userspace as the kernel can preempt itself).
Address pr/47341 for aarch64.
Fixes: https://github.com/ClangBuiltLinux/linux/issues/289
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed By: xiangzhangllvm, DavidSpickett, dmgreen
Differential Revision: https://reviews.llvm.org/D100919
Ensure we tell getShiftAmountTy that we're working with pre-legalized types to prevent cases where the (legalized) shift type can no longer handle the (non-legalized) type width.
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=34366
Swift's new concurrency features are going to require guaranteed tail calls so
that they don't consume excessive amounts of stack space. This would normally
mean "tailcc", but there are also Swift-specific ABI desires that don't
naturally go along with "tailcc" so this adds another calling convention that's
the combination of "swiftcc" and "tailcc".
Support is added for AArch64 and X86 for now.
The select-of-constants transform was asserting that its constant vector
inputs did not implicitly truncate their input without that as an
explicit precondition to the function. This patch relaxes that assertion
into an early return to skip the optimization.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D102393
ScheduleDAGFast.cpp is compiled to object file, but the ScheduleDAGFast
object file isn't linked into clang executable file as no symbol is
referred by outside. Add calling to createXxx of ScheduleDAGFast.cpp,
then the ScheduleDAGFast object file will be linked into clang
executable file. The static RegisterScheduler will register scheduler
fast and linearize at clang boot time.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D101601
This adds a simple fold into codegenprepare that converts comparison of
branches towards comparison with zero if possible. For example:
%c = icmp ult %x, 8
br %c, bla, blb
%tc = lshr %x, 3
becomes
%tc = lshr %x, 3
%c = icmp eq %tc, 0
br %c, bla, blb
As a first order approximation, this can reduce the number of
instructions needed to perform the branch as the shift is (often) needed
anyway. At the moment this does not effect very much, as llvm tends to
prefer the opposite form. But it can protect against regressions from
commits like rG9423f78240a2.
Simple cases of Add and Sub are added along with Shift, equally as the
comparison to zero can often be folded with cpsr flags.
Differential Revision: https://reviews.llvm.org/D101778
This patch adds support for GCC's -fstack-usage flag. With this flag, a stack
usage file (i.e., .su file) is generated for each input source file. The format
of the stack usage file is also similar to what is used by GCC. For each
function defined in the source file, a line with the following information is
produced in the .su file.
<source_file>:<line_number>:<function_name> <size_in_byte> <static/dynamic>
"Static" means that the function's frame size is static and the size info is an
accurate reflection of the frame size. While "dynamic" means the function's
frame size can only be determined at run-time because the function manipulates
the stack dynamically (e.g., due to variable size objects). The size info only
reflects the size of the fixed size frame objects in this case and therefore is
not a reliable measure of the total frame size.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100509
This extends any frame record created in the function to include that
parameter, passed in X22.
The new record looks like [X22, FP, LR] in memory, and FP is stored with 0b0001
in bits 63:60 (CodeGen assumes they are 0b0000 in normal operation). The effect
of this is that tools walking the stack should expect to see one of three
values there:
* 0b0000 => a normal, non-extended record with just [FP, LR]
* 0b0001 => the extended record [X22, FP, LR]
* 0b1111 => kernel space, and a non-extended record.
All other values are currently reserved.
If compiling for arm64e this context pointer is address-discriminated with the
discriminator 0xc31a and the DB (process-specific) key.
There is also an "i8** @llvm.swift.async.context.addr()" intrinsic providing
front-ends access to this slot (and forcing its creation initialized to nullptr
if necessary).
Since 5de2d189e6 this particular warning
hasn't had the location of the source file containing the inline
assembly.
Fix this by reporting via LLVMContext. Which means that we no longer
have the "instantiated into assembly here" lines but they were going to
point to the start of the inline asm string anyway.
This message is already tested via IR in llvm. However we won't have
the required location info there so I've added a C file test in clang
to cover it.
(though strictly, this is testing llvm code)
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D102244
I've taken the following steps to add unwinding support from inline assembly:
1) Add a new `unwind` "attribute" (like `sideeffect`) to the asm syntax:
```
invoke void asm sideeffect unwind "call thrower", "~{dirflag},~{fpsr},~{flags}"()
to label %exit unwind label %uexit
```
2.) Add Bitcode writing/reading support + LLVM-IR parsing.
3.) Emit EHLabels around inline assembly lowering (SelectionDAGBuilder + GlobalISel) when `InlineAsm::canThrow` is enabled.
4.) Tweak InstCombineCalls/InlineFunction pass to not mark inline assembly "calls" as nounwind.
5.) Add clang support by introducing a new clobber: "unwind", which lower to the `canThrow` being enabled.
6.) Don't allow unwinding callbr.
Reviewed By: Amanieu
Differential Revision: https://reviews.llvm.org/D95745
We want it to be available in analyzes so that we could use the
CodeGen notion in middle-end passes (for example, to check if
a GC may free some particular pointer).
This is a preparatory patch that simply moves the files around.
Note: if this causes some build issues, this patch must just be reverted.
Differential Revision: https://reviews.llvm.org/D100557
Reviewed By: reames
This patch extends the vector type-conversion and legalization capabilities of
scalable vector types.
Firstly, `vscale x 1` types now behave more like the corresponding `vscale x
2+` types. This enables the integer promotion legalization of extended scalable
types, such as the promotion of `<vscale x 1 x i5>` to `<vscale x 1 x i8>`.
These `vscale x 1` types are also now better handled by
`getVectorTypeBreakdown`, where what looks like older handling for 1-element
fixed-length vector types was spuriously updated to include scalable types.
Widening of scalable types is now better supported, by using `INSERT_SUBVECTOR`
to insert the smaller scalable vector "value" type into the wider scalable
vector "part" type. This allows AArch64 to pass and return `vscale x 1` types
by value by widening.
There are still cases where we are unable to legalize `vscale x 1` types, such
as where expansion would require splitting the vector in two.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D102073
Fixes a bug in the DAG combiner that eliminates the stores because it missed
to inspect the address space of the pointers.
%v = load %ptr_as1
// no chain side effect
store %v, %ptr_as2
As well as
store %v, %ptr_as1
store %v, %ptr_as2
Fixes a test for above in X86.
Differential Revision: https://reviews.llvm.org/D102096
MachineRegisterInfo caches the reserved register set that is computed by
by TargetRegisterInfo::getReservedRegs, so call into MRI to get the
reserved regs to avoid recomputing them.
In particular this speeds up AMDGPU's SIFormMemoryClauses pass because
AMDGPU has a particularly complicated reserved set that is expensive to
compute.
Differential Revision: https://reviews.llvm.org/D102318
Previous crashes caused by this patch were the result of machine
subregisters being incorrectly handled in updateDbgUsersToReg; this has
been fixed by using RegUnits to determine overlapping registers, instead
of using the register values directly.
Differential Revision: https://reviews.llvm.org/D101523
This reverts commit 7ca26c5fa2.
Currently the ValueHandler handles both selecting the type and
location for arguments, as well as inserting instructions needed to
handle them. Split this so that the determination of the argument
handling is independent of the function state. Currently the checks
for tail call compatibility do not follow the full assignment logic,
so it misses cases where arguments require nontrivial legalization.
This should help avoid targets ending up in a buggy state where the
argument evaluation may change in different contexts.
STATEPOINT is a fancy and complex pseudo instruction which
has both tied defs and regmask operand.
Basic FastRA algorithm is as follows:
1. Mark registers used by defs as free
2. If instruction has regmask operand displace clobbered registers
according to regmask.
3. Assign registers for use operands.
In case of tied defs step 1 is replaced with allocation of registers
for them. But regmask is still processed, which may displace already
allocated registers. As a result, tied use and def will get assigned
to different registers.
This patch makes FastRA to process instruction's RegMask (if any) when
checking for physical registers interference.
That way tied operands won't get registers clobbered by regmask.
Reviewed By: arsenm, skatkov
Differential Revision: https://reviews.llvm.org/D99284
This change was originally landed in: 5000a1b4b9
It was reverted in: 061e071d8c
This change adds support for a new WASM_SEG_FLAG_STRINGS flag in
the object format which works in a similar fashion to SHF_STRINGS
in the ELF world.
Unlike the ELF linker this support is currently limited:
- No support for SHF_MERGE (non-string merging)
- Always do full tail merging ("lo" can be merged with "hello")
- Only support single byte strings (p2align 0)
Like the ELF linker merging is only performed at `-O1` and above.
This fixes part of https://bugs.llvm.org/show_bug.cgi?id=48828,
although crucially it doesn't not currently support debug sections
because they are not represented by data segments (they are custom
sections)
Differential Revision: https://reviews.llvm.org/D97657
This change adds support for a new WASM_SEG_FLAG_STRINGS flag in
the object format which works in a similar fashion to SHF_STRINGS
in the ELF world.
Unlike the ELF linker this support is currently limited:
- No support for SHF_MERGE (non-string merging)
- Always do full tail merging ("lo" can be merged with "hello")
- Only support single byte strings (p2align 0)
Like the ELF linker merging is only performed at `-O1` and above.
This fixes part of https://bugs.llvm.org/show_bug.cgi?id=48828,
although crucially it doesn't not currently support debug sections
because they are not represented by data segments (they are custom
sections)
Differential Revision: https://reviews.llvm.org/D97657
For opaque pointers, we're trying to avoid uses of
PointerType::getElementType().
A couple of ISel places use PointerType::getElementType(). Some of these
are easy to fix by using ArgListEntry's indirect types.
The inalloca type wasn't stored there, as opposed to preallocated and
byval which have their indirect types available, so add it and use it.
Differential Revision: https://reviews.llvm.org/D101713
For contiguous ranges we drop the last bit-test case but in doing so we skip
adding the new MBB PHI edges to the list of replacement PHI edges, and as a
result we incorrectly omit them in the G_PHI in finishPendingPhis().
Was found when bootstrapping clang with -O3 and GlobalISel enabled on Apple Silicon.
The logic for x86_64 position-independent TType encodings was backwards,
using 8 bytes where 4 were wanted and 4 where 8 were wanted. For regular
x86_64, this was mostly harmless, exception tables are allowed to use
8-byte encodings even when it is not needed. For the large code model,
and for X32, however, the generated exception tables were wrong. For the
large code model, we cannot assume that the address will fit in 4 bytes.
For X32, we cannot use 64-bit relocations.
Fixes PR50148.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D102132
Expanding a fixed length operation involves wrapping the operation in an
insert/extract subvector pair, as such, when this is done to bitcast we
end up with an extract_subvector of a bitcast. DAGCombine tries to
convert this into a bitcast of an extract_subvector which restores the
initial fixed length bitcast, causing an infinite loop of legalization.
As part of this patch, we must make sure the above DAGCombine does not
trigger after legalization if the created bitcast would not be legal.
Differential Revision: https://reviews.llvm.org/D101990
A ConstantAggregateZero may be created from a scalable vector type.
However, it still assumed fixed number of elements when queried for
them. This patch changes ConstantAggregateZero to correctly report its
element count.
This change fixes a couple of issues. Firstly, it fixes a crash in
Constant::getUniqueValue when called on a scalable-vector
zeroinitializer constant.
Secondly, it fixes a latent bug in GlobalISel's IRTranslator in which
translating a scalable-vector zeroinitializer would hit the assertion in
ConstantAggregateZero::getNumElements when casting to a FixedVectorType,
rather than reporting an error more gracefully. This is currently
hypothetical as the IRTranslator has deeper issues preventing the use of
scalable vector types.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D102082
The function template `CallLowering::setArgFlags` is invoked both
for arguments and return values. In the latter case, it calls
`getParamStackAlign` with argument index `~0u`. Nothing wrong
happens now, as the argument is safely incremented back to 0
inside `getParamStackAlign` (the type is `unsigned`), but in
principle it's fragile and may become incorrect.
Differential Revision: https://reviews.llvm.org/D102004
This patch extends VectorLegalizer::ExpandSELECT to permit expansion
also for scalable vector types. The only real change is conditionally
checking for BUILD_VECTOR or SPLAT_VECTOR legality depending on the
vector type.
We can use this to fix "cannot select" errors for scalable vector
selects on the RISCV target. Note that in future patches RISCV will
possibly custom-lower vector SELECTs to VSELECTs for branchless codegen.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102063
Printing pass manager invocations is fairly verbose and not super
useful.
This allows us to remove DebugLogging from pass managers and PassBuilder
since all logging (aside from analysis managers) goes through
instrumentation now.
This has the downside of never being able to print the top level pass
manager via instrumentation, but that seems like a minor downside.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D101797
Similar to X86 D73230 & 46788a21f9
With this change, we can set dso_local in clang's -fpic -fno-semantic-interposition mode,
for default visibility external linkage non-ifunc-non-COMDAT definitions.
For such dso_local definitions, variable access/taking the address of a
function/calling a function will go through a local alias to avoid GOT/PLT.
Note: the 'S' inline assembly constraint refers to an absolute symbolic address
or a label reference (D46745).
Differential Revision: https://reviews.llvm.org/D101872
Reapply b623df3c, which was reverted while reverting a different patch
with a breaking change. There are no underlying issues with this patch,
so no changes have been made to the original patch.
This reverts commit b11e4c9907.
This patch fixes a crash in the compiler that occurs when certain
invalidated SDDbgValues are emitted. The cause of this was that we would
attempt to check the liveness of the debug value's operands, which
triggers an assert if any of those operands are invalid. This patch
changes this check such that it only occurs if the SDDbgValue is valid;
if not, the check is irrelevant anyway, so can be safely ignored.
Differential Revision: https://reviews.llvm.org/D101540
Based off a discussion on D89281 - where the AARCH64 implementations were being replaced to use funnel shifts.
Any target that has efficient funnel shift lowering can handle the shift parts expansion using the same expansion, avoiding a lot of duplication.
I've generalized the X86 implementation and moved it to TargetLowering - so far I've found that AARCH64 and AMDGPU benefit, but many other targets (ARM, PowerPC + RISCV in particular) could easily use this with a few minor improvements to their funnel shift lowering (or the folding of their target ops that funnel shifts lower to).
NOTE: I'm trying to avoid adding full SHIFT_PARTS legalizer handling as I think it might actually be possible to remove these opcodes in the medium-term and use funnel shift / libcall expansion directly.
Differential Revision: https://reviews.llvm.org/D101987
This patch modifies updateDbgUsersToReg to properly handle
DBG_VALUE_LIST instructions, by replacing the hard-coded operand indices
(i.e. getOperand(0)) with the more general getDebugOperandsForReg(), and
updating the register for all matching operands.
Differential Revision: https://reviews.llvm.org/D101523
Serialize ScavengeFI from SIMachineFunctionInfo into yaml.
ScavengeFI is not used outside of the PrologEpilogInserter,
so this shouldn't change anything.
Differential Revision: https://reviews.llvm.org/D101367
Add a new wrapper function addAttribute() for Die.addValue() function,
so we can do some attributes control in one single interface.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D101125
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Re-landed with correct handling in ComputeNumSignBits for Tmp == VTBits,
where zero-extending atomics were incorrectly returning 0 rather than
the (slightly confusing) required return value of 1.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
This change enables emitting CFI unwind information for debugging purpose
for targets with MCAsmInfo::ExceptionsType == ExceptionHandling::None.
Currently generating CFI unwind information is entangled with supporting
the exceptions, even when AsmPrinter explicitly recognizes that the unwind
tables are being generated as debug information.
In fact, the unwind information is not generated even if we specify
--force-dwarf-frame-section, unless exceptions are enabled. The LIT test
llvm/test/CodeGen/AMDGPU/debug_frame.ll demonstrates this behavior.
Enable this option for AMDGPU to prepare for future patches which add
complete CFI support.
Reviewed By: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D78778
Unfortunately the current call lowering code is built on top of the
legacy MVT/DAG based code. However, GlobalISel was not using it the
same way. In short, the DAG passes legalized types to the assignment
function, and GlobalISel was passing the original raw type if it was
simple.
I do believe the DAG lowering is conceptually broken since it requires
picking a type up front before knowing how/where the value will be
passed. This ends up being a problem for AArch64, which wants to pass
i1/i8/i16 values as a different size if passed on the stack or in
registers.
The argument type decision is split across 3 different places which is
hard to follow. SelectionDAG builder uses
getRegisterTypeForCallingConv to pick a legal type, tablegen gives the
illusion of controlling the type, and the target may have additional
hacks in the C++ part of the call lowering. AArch64 hacks around this
by not using the standard AnalyzeFormalArguments and special casing
i1/i8/i16 by looking at the underlying type of the original IR
argument.
I believe people have generally assumed the calling convention code is
processing the original types, and I've discovered a number of dead
paths in several targets.
x86 actually relies on the opposite behavior from AArch64, and relies
on x86_32 and x86_64 sharing calling convention code where the 64-bit
cases implicitly do not work on x86_32 due to using the pre-legalized
types.
AMDGPU targets without legal i16/f16 have always used a broken ABI
that promotes to i32/f32. GlobalISel accidentally fixed this to be the
ABI we should have, but this fixes it so we're using the worse ABI
that is compatible with the DAG. Ideally we would fix the DAG to match
the old GlobalISel behavior, but I don't wish to fight that battle.
A new native GlobalISel call lowering framework should let the target
process the incoming types directly.
CCValAssigns select a "ValVT" and "LocVT" but the meanings of these
aren't entirely clear. Different targets don't use them consistently,
even within their own call lowering code. My current belief is the
intent was "ValVT" is supposed to be the legalized value type to use
in the end, and and LocVT was supposed to be the ABI passed type
(which is also legalized).
With the default CCState::Analyze functions always passing the same
type for these arguments, these only differ when the TableGen part of
the lowering decide to promote the type from one legal type to
another. AArch64's i1/i8/i16 hack ends up inverting the meanings of
these values, so I had to add an additional hack to let the target
interpret how large the argument memory is.
Since targets don't consistently interpret ValVT and LocVT, this
doesn't produce quite equivalent code to the initial DAG
lowerings. I've opted to consistently interpret LocVT as the in-memory
size for stack passed values, and ValVT as the register type to assign
from that memory. We therefore produce extending loads directly out of
the IRTranslator, whereas the DAG would emit regular loads of smaller
values. This will also produce loads/stores that are wider than the
argument value if the allocated stack slot is larger (and there will
be undef padding bytes). If we had the optimizations to reduce
load/stores based on truncated values, this wouldn't produce a
different end result.
Since ValVT/LocVT are more consistently interpreted, we now will emit
more G_BITCASTS as requested by the CCAssignFn. For example AArch64
was directly assigning types to some physical vector registers which
according to the tablegen spec should have been casted to a vector
with a different element type.
This also moves the responsibility for inserting
G_ASSERT_SEXT/G_ASSERT_ZEXT from the target ValueHandlers into the
generic code, which is closer to how SelectionDAGBuilder works.
I had to xfail an x86 test since I don't see a quick way to fix it
right now (I filed bug 50035 for this). It's broken independently of
this change, and only triggers since now we end up with more ands
which hit the improperly handled selection pattern.
I also observed that FP arguments that need promotion (e.g. f16 passed
as f32) are broken, and use regular G_TRUNC and G_ANYEXT.
TLDR; the current call lowering infrastructure is bad and nobody has
ever understood how it chooses types.
- Move the code preventing CSE of `isConvergent` instrs into
`ProcessBlockCSE` (from `isProfitableToCSE`)
- Add comments explaining why `isConvergent` is used to prevent
CSE of non-local instrs in MachineCSE and the new test
This untangles the MCContext and the MCObjectFileInfo. There is a circular
dependency between MCContext and MCObjectFileInfo. Currently this dependency
also exists during construction: You can't contruct a MOFI without a MCContext
without constructing the MCContext with a dummy version of that MOFI first.
This removes this dependency during construction. In a perfect world,
MCObjectFileInfo wouldn't depend on MCContext at all, but only be stored in the
MCContext, like other MC information. This is future work.
This also shifts/adds more information to the MCContext making it more
available to the different targets. Namely:
- TargetTriple
- ObjectFileType
- SubtargetInfo
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101462
This seems to have broken sanitizers, giving lots of
Assertion `NumBits <= MAX_INT_BITS && "bitwidth too large"' failed.
failures across multiple targets (currently X86 and PowerPC). Reverting
until I have a chance to reproduce and debug.
This reverts commit 6e876f9ded.
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
Fix a bug where buildZExtInReg will create and use a new register instead of using the register from parameter DstOp Res.
Reviewed By: arsenm, foad
Differential Revision: https://reviews.llvm.org/D101871
statepoint instruction uses tied-def registers to represent live gc value which
is use and def at the same time on a call.
At the same time invoke statepoint instruction is a last split point which can throw and
jump to landing pad.
As a result we have instructon which is last split point with tied-defs registers and
we need to teach Greedy RA to work with it.
The option -use-registers-for-gc-values-in-landing-pad controls whether statepoint lowering
will generate tied-defs for invoke statepoint and is off by default now.
To resolve all issues the following changes has been done.
1) Last Split point for invoke statepoint should be statepoint itself
If statepoint has a def it is a relocated gc pointer and it should be available in landing pad.
So we cannot split interval after statepoint at end of basic block.
2) Do not split interval on tied-def
If end of interval for overlap utility is a use which has tied-def we
should not split interval on this instruction due to in this case use
and def may have different registers and it breaks tied-def property.
3) Take into account Last Split Point for enterIntvAtEnd
If the use after Last Split Point is a def so it should be tied-def and
we can take the def of the tied-use as ParentVNI and thus
tied-use and tied-def will be live in resulting interval.
4) Handle the case when def is after LIP in InlineSpiller
If def of LI is after last insertion point of basic block we cannot hoist in this BB.
The example of such instruction is invoke statepoint where def represents the
relocated live gc pointer. Invoke is a last insertion point and its def is located after it.
In this case there is no place to insert spill and we bail out.
5) Fix removeBackCopies to account empty copies
RegAssignMap cannot hold empty interval, so do not set stop
to kill value if it produces empty interval.
This can happen if we remove back-copy and right before that we have another
back-copy.
For example, for parent %0 we can get
%1 = COPY %0
%2 = COPY %0
while we removing %2 we cannot set kill for %1 due to its empty.
6) Do not hoist copy to BB if its def is after LSP
If the parent def is a LastSplitPoint or later we cannot hoist copy to this basic block
because inserted copy (or re-materialization) will be located before the def.
All parts have been reviewed separately as follows:
https://reviews.llvm.org/D100747https://reviews.llvm.org/D100748https://reviews.llvm.org/D100750https://reviews.llvm.org/D100927https://reviews.llvm.org/D100945https://reviews.llvm.org/D101028
Reviewers: reames, rnk, void, MatzeB, wmi, qcolombet
Reviewed By: reames, qcolombet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D101150
This patch adds the two MVTs to fix a legalizer crash when using vector
shuffles of <256 x i16> and <128 x i16> on RISC-V. The legalizer can't
promote the operand of `v256i32 = any_extend_vector_inreg v128i16`.
Reviewed By: craig.topper, RKSimon
Differential Revision: https://reviews.llvm.org/D101769
Removing an assertion introduced with D68945. The
patch was later reverted with 6531a78ac4, but failed
to remove this assertion. It causes a problem while
trying to split a 64-bit argument into sub registers.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D101594
This reverts the revert 02c5ba8679
Fix:
Pass was registered as DUMMY_FUNCTION_PASS causing the newpm-pass
functions to be doubly defined. Triggered in -DLLVM_ENABLE_MODULE=1
builds.
Original commit:
This patch implements expansion of llvm.vp.* intrinsics
(https://llvm.org/docs/LangRef.html#vector-predication-intrinsics).
VP expansion is required for targets that do not implement VP code
generation. Since expansion is controllable with TTI, targets can switch
on the VP intrinsics they do support in their backend offering a smooth
transition strategy for VP code generation (VE, RISC-V V, ARM SVE,
AVX512, ..).
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D78203
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Originally submitted as 3338290c18.
Reverted in c7df6b1223.
The comment about how to make use of debugger tuning within DwarfDebug
really belongs inside the DwarfDebug declaration, where it will be
easier to find.
This allows for a much more efficient encoding for small negative
numbers by storing the sign bit first and negating the rest of
the bits. This was already being used for OPC_CheckInteger.
For every in tree target this affects, the table got smaller.
R600GenDAGISel.inc saw the largest reduction of 7K.
I did have to add a new opcode for StringIntegers used for
register class ids and subregister indices since we don't have the
integer value to encode. The enum name is emitted directly into
the table. Previously assumed the enum would expand to a positive
7-bit number. We might be able to just shift that right by 1 and
assume it is a positive 6 bit number, but that will need more
investigation.
This extends the early-ifcvt pass to avoid a few more cases where the resulting
select instructions would have matching operands. Additionally, we now use TII
to determine "sameness" of the operands so that as TII gets smarter, so too
will ifcvt.
The attached test case was bugpoint-reduced down from CINT2000/252.eon in the
test-suite. See: https://clang.godbolt.org/z/WvnrcrGEn
Differential Revision: https://reviews.llvm.org/D101508
This extends the early-ifcvt pass to avoid a few more cases where the resulting
select instructions would have matching operands. Additionally, we now use TII
to determine "sameness" of the operands so that as TII gets smarter, so too
will ifcvt.
The attached test case was bugpoint-reduced down from CINT2000/252.eon in the
test-suite. See: https://clang.godbolt.org/z/WvnrcrGEn
Differential Revision: https://reviews.llvm.org/D101508
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Summary:
This patch implements the backend implementation of adding global variables
directly to the table of contents (TOC), rather than adding the address of the
variable to the TOC.
Currently, this patch will look for the "toc-data" attribute on symbols in the
IR, and then add those symbols to the TOC.
ATM, this is implemented for 32 bit AIX.
Reviewers: sfertile
Differential Revision: https://reviews.llvm.org/D101178
This patch implements expansion of llvm.vp.* intrinsics
(https://llvm.org/docs/LangRef.html#vector-predication-intrinsics).
VP expansion is required for targets that do not implement VP code
generation. Since expansion is controllable with TTI, targets can switch
on the VP intrinsics they do support in their backend offering a smooth
transition strategy for VP code generation (VE, RISC-V V, ARM SVE,
AVX512, ..).
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D78203
Don't assert if there are unassigned virtual registers. Maintain
LiveIntervals by removing the RegUnits for allocated registers, since
they should not longer be necessary.
One part I find somewhat questionable is the special handling
necessary for handleIdentityCopy. The LiveIntervals for the relevant
regunits needs to be removed.
In a future change it will be possible to run register
allocation with a specific set of register classes,
so some of the remaining virtual registers will still
be meaningful.
Value only used by metadata can be removed from .addrsig table.
This solves the undefined symbol error when enabling addrsig table on COFF LTO.
Differential Revision: https://reviews.llvm.org/D101512
Summary:
Personality routine could be an alias to another personality routine.
Fix the situation when we compile the file that contains the personality
routine and the file also have functions that need to refer to the
personality routine.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D101401
Functions can have section names set via #pragma or section attributes,
basic block sections should be correctly named for such functions.
With #pragma, the expectation is that all functions in that file are placed
in the same section in the final binary. Basic block sections should be
correctly named with the unique flag set so that the final binary has all the
basic blocks of the function in that named section. This patch fixes the bug
by calling getExplictSectionGlobal when implicit-section-name attribute is set
to make sure the function's basic blocks get the correct section name.
Differential Revision: https://reviews.llvm.org/D101311
Some liveins *can* come from this block (e.g. any SSA value except the call),
it's only the ones that produce `landingpad` values that can't and I didn't
think it through properly.
These registers get defined by the runtime, not the block being allocated, and
treating them as preassigned in RegAllocFast adds extra pressure, sometimes
enough to make the function unallocatable.
This reverts commit 3b8ec86fd5.
Revert "[X86] Refine AMX fast register allocation"
This reverts commit c3f95e9197.
This pass breaks using LLVM in a multi-threaded environment by
introducing global state.
This replaces D98479.
This allows type legalization to form SPLAT_VECTOR_PARTS so we don't
lose the splattedness when the scalar type is split.
I'm handling SPLAT_VECTOR_PARTS for fixed vectors separately so
we can continue using non-VL nodes for scalable vectors.
I limited to RV32+vXi64 because DAGCombiner::visitBUILD_VECTOR likes
to form SPLAT_VECTOR before seeing if it can replace the BUILD_VECTOR
with other operations. Especially interesting is a splat BUILD_VECTOR of
the extract_vector_elt which can become a splat shuffle, but won't if
we form SPLAT_VECTOR first. We either need to reorder visitBUILD_VECTOR
or add visitSPLAT_VECTOR.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100803
This is a compile time optimization. DILocation:get() is expensive to call, and
we were calling it to create a line zero debug loc for *every* instruction we
translated. We only really need to do this just before we build constants in the
entry block, so I moved this code there. This reduces the LLVM -O0 codegen time
of sqlite3 IR by around 0.7% instructions executed and by about ~2% in CPU time.
We can probably do better with a more involved change, since the reason we need
to create one for each new constant is because we're using the debug scope and
inlined-at loc. If we just use a single instruction's scope and drop the
inlined-at, we can just cache these and have them be free.
This was picking a concrete size for a physical register, and
enforcing exact match on the virtual register's type size. Some
targets add multiple types to a register class, and some are smaller
than the full bit width. For example x86 adds f32 to 128-bit xmm
registers, and AMDGPU adds i16/f16 to 32-bit registers.
It might be better to represent these cases as a copy of the full
register and an extraction of the subpart, but a lot of code assumes
you can directly copy. This will help fix the current usage of the DAG
calling convention infrastructure which is incompatible with how
GlobalISel is now using it.
The API is somewhat cumbersome here, but I just mirrored the existing
functions, except now with LLTs (and allow returning null on failure,
unlike the MVT version). I think the concept of selecting register
classes based on type is flawed to begin with, but I'm trying to keep
this compatible with the existing handling.
This patch fixes a crash in LiveDebugVariables for inputs where a
DBG_VALUE_LIST had 64 or more debug operands. This was triggering an
assert, which was added under the assumption that only bad CodeGen would
result in such a limit being hit, but relatively simple source files
that result in these incredibly long debug values have been found, so
this assert has been changed to a condition that drops the debug value
if it is not met.
Differential Revision: https://reviews.llvm.org/D101373
In terms of readability, the `enum CFIMoveType` didn't better document what it
intends to convey i.e. the type of CFI section that gets emitted.
Reviewed By: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D76519
Previously we used an i32 constant to store the saturation width, but i32 isn't
legal on RISCV64. This wasn't a big deal to fix, but it is extra work for the
type legalizer.
This patch uses a VTSDNode to store the type similar to SEXT_INREG. This makes
it opaque to the type legalizer.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D101262
GCC supports negative values for -mstack-protector-guard-offset=, this
should be a signed value. Pre-req to D100919.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101325
The .file directive is changed to only have basename in D36018 for
ELF.
But on AIX, we require the .file directive to also contain the
directory info. This aligns with other AIX compiler like XLC and is
required by some AIX tool like DBX.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D99785
This reverts commit 0ce723cb22.
D76519 was not quite NFC. If we see a CFISection::Debug function before a
CFISection::EH one (-fexceptions -fno-asynchronous-unwind-tables), we may
incorrectly pick CFISection::Debug and emit a `.cfi_sections .debug_frame`.
We should use .eh_frame instead.
This scenario is untested.
https://reviews.llvm.org/D99400 set clang DefaultDebuggerTuning for AIX
to dbx. However, we still need to update the target default so that llc
and other tools will get the same default debuggertuning, and avoid
passing extra options in LTO.
Reviewed By: #powerpc, shchenz, dblaikie
Differential Revision: https://reviews.llvm.org/D101197
In terms of readability, the `enum CFIMoveType` didn't better document what it
intends to convey i.e. the type of CFI section that gets emitted.
Reviewed By: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D76519
The data member 'shouldEmitMoves' is only used in DwarfCFIException::beginFunction()
and 'shouldEmitCFI' in DwarfCFIExceptionBase serves its purpose.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101155
At the moment, MachineCSE allows CSE-ing convergent instrs which are
non-local to each other. This can cause illegal codegen as convergent
instrs are control flow dependent. The patch prevents non-local CSE of
convergent instrs by adding a check in isProfitableToCSE and rejecting
CSE-ing if we're considering CSE-ing non-local convergent instrs. We
can still CSE convergent instrs which are in the same control flow
scope, so the patch purposely does not make all convergent instrs
non-CSE candidates in isCSECandidate.
https://reviews.llvm.org/D101187
Previous build failures were caused by an error in bitcode reading and
writing for DIArgList metadata, which has been fixed in e5d844b587.
There were also some unnecessary asserts that were being triggered on
certain builds, which have been removed.
This reverts commit dad5caa59e.
Make following function return void:
addLabel()
addSectionLabel()
addSectionDelta()
This aligns with other attributes adding functions.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D101022
This is mostly NFC except that for end of BB not previous slot is used.
Idx is used to find a def of sibling live interval in that slot.
The def on end of MBB and on previous slot of end MBB should be the same,
so it should be NFC.
Reviewers: reames, qcolombet, MatzeB, wmi, rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100922
The Linux kernel objtool diagnostic `call without frame pointer save/setup`
arise in multiple instrumentation passes (asan/tsan/gcov). With the mechanism
introduced in D100251, it's trivial to respect the command line
-m[no-]omit-leaf-frame-pointer/-f[no-]omit-frame-pointer, so let's do it.
Fix: https://github.com/ClangBuiltLinux/linux/issues/1236 (tsan)
Fix: https://github.com/ClangBuiltLinux/linux/issues/1238 (asan)
Also document the function attribute "frame-pointer" which is long overdue.
Differential Revision: https://reviews.llvm.org/D101016
Add PromoteIntOp_FP_TO_XINT_SAT to type legalize the bit width
operand from i32 to i64 for RV64.
Add test cases for the saturating intrinsics for half/float/double
and i32/i64. CodeGen is definitely not optimal. We can probably
make use of the native behavior of fcvt instructions in many cases.
Fixes PR50083
It is proper to relax non-negative limitation of step_vector.
Also this patch adds more combines for step_vector:
(sub X, step_vector(C)) -> (add X, step_vector(-C))
Differential Revision: https://reviews.llvm.org/D100812
This change adds debug information about whether PGO is being used or
not.
Microsoft performance tooling (e.g. xperf, WPA) uses this information to
show whether functions are optimized with PGO or not, as well as whether
PGO information is invalid.
This information is useful for validating whether training scenarios are
providing good coverage of real world scenarios, showing if profile data
is out of date, etc.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D99994
CommandLine.h is indirectly included in ~50% of TUs when building
clang, and VirtualFileSystem.h is large.
(Already remarked by jhenderson on D70769.)
No behavior change.
Differential Revision: https://reviews.llvm.org/D100957
This patch adds incrementally-better support for SPLAT_VECTOR in a
handful of vector combines by changing a few more
isBuildVectorAllOnes/isBuildVectorAllZeros to the equivalent
isConstantSplatVectorAllOnes/Zeros calls.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D100851
PHIElimination may insert copy instructions in multiple basic
blocks. Moving debug locations across basic block boundaries would be
misleading as illustrated by the test case.
rdar://75463656
Differential Revision: https://reviews.llvm.org/D100886
It used to be that all of our intrinsics were call instructions, but over time, we've added more and more invokable intrinsics. According to the verifier, we're up to 8 right now. As IntrinsicInst is a sub-class of CallInst, this puts us in an awkward spot where the idiomatic means to check for intrinsic has a false negative if the intrinsic is invoked.
This change switches IntrinsicInst from being a sub-class of CallInst to being a subclass of CallBase. This allows invoked intrinsics to be instances of IntrinsicInst, at the cost of requiring a few more casts to CallInst in places where the intrinsic really is known to be a call, not an invoke.
After this lands and has baked for a couple days, planned cleanups:
Make GCStatepointInst a IntrinsicInst subclass.
Merge intrinsic handling in InstCombine and use idiomatic visitIntrinsicInst entry point for InstVisitor.
Do the same in SelectionDAG.
Do the same in FastISEL.
Differential Revision: https://reviews.llvm.org/D99976
This is currently built on top of the SelectionDAG call lowering, but
does not use it the same way. SelectionDAG passes legalized types to
the assignment functions, and the tablegenerated assignment functions
may change the value types expected for registers. This does not
change the types used, just moves the register creation to help fix
this in the future.
Defer the register creation until after all of the assignment
decisions have been made. This will also help have correct tail call
compatibility checking in a future change. Currently it does not work
as expected for any arguments split across multiple registers.
Re-land the patch with a fix of clang test.
Cost of spill location is computed basing on relative branch frequency
where corresponding spill/reload/copy are located.
While the number itself is highly depends on incoming IR,
the total cost can be used when do some changes in RA.
Revert "Revert "[GreedyRA ORE] Add Cost of spill locations into remark""
This reverts commit 680f3d6de7.
This patch changes ISD::isBuildVectorAllZeros to
ISD::isConstantSplatVectorAllZeros which handles zero sclar vector.
TestPlan: check-llvm
Differential Revision: https://reviews.llvm.org/D100813
This patch relaxes the requirement that the STEP_VECTOR step constant
must be of a type at least as large as the vector element type. This
does not permit its use on targets which have legal vector element types
larger than the largest legal scalar type, such as i64 vectors on RV32.
As such, the requirement has been loosened so that the step operand must
be any scalar type so long as the constant immediate is non-negative and
the value fits inside the vector element type.
This limits combining optimizations in certain circumstances but in
practice it's unlikely to be a hindrance.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D100660
Cost of spill location is computed basing on relative branch frequency
where corresponding spill/reload/copy are located.
While the number itself is highly depends on incoming IR,
the total cost can be used when do some changes in RA.
Reviewers: reames, MatzeB, anemet, thegameg
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100020
Pseudo probe are currently given a slot index like other regular instructions. This affects register pressure and lifetime weight computation because of enlarged lifetime length with pseudo probe instructions. As a consequence, program could get different code generated w/ and w/o pseudo probes. I'm closing the gap by excluding pseudo probes from stack index and downstream register allocation related passes.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D100334
Flipping the default value of SkipPseudoOp to true for those MIR APIs to favor maximum performance. Note that certain spots like branch folding and MIR if-conversion is are disabled for better counts quality. For these two optimizations, this is a no-diff change.
The counts quality with SPEC2017 before/after this change is unchanged.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D100332
In an env that reuses compiler instances for multiple compilations, this
omission results in non-deterministic assembly output (names of the
auto-generated labels) if the order or full set of Modules compiled
varies.
Differential Revision: https://reviews.llvm.org/D100797
When the ProcResGroup has BufferSize=0,
1. if there is a subunit in the list of write resources for the
scheduling class, do not attempt to schedule the ProcResGroup.
2. if there is not a subunit in the list of write resources for the
scheduling class, choose a subunit to use instead of the ProcResGroup.
3. having both the ProcResGroup and any of its subunits in the resources
implied by a InstRW is not supported.
Used to model parallel uses from a pool of resources.
Differential Revision: https://reviews.llvm.org/D98976
It turns out we actually import a bunch of selection code for intrinsics. The
imported code checks that the register banks on the G_INTRINSIC instruction
are correct. If so, it goes ahead and selects it.
This adds code to AArch64RegisterBankInfo to allow us to correctly determine
register banks on intrinsics which have known register bank constraints.
For now, this only handles @llvm.aarch64.neon.uaddlv. This is necessary for
porting AArch64TargetLowering::LowerCTPOP.
Also add a utility for getting the intrinsic ID from a G_INTRINSIC instruction.
This seems a little nicer than having to know about how intrinsic instructions
are structured.
Differential Revision: https://reviews.llvm.org/D100398
Move the findDbg* functions into lib/IR/DebugInfo.cpp from
lib/Transforms/Utils/Local.cpp.
D99169 adds a call to a function (findDbgUsers) that lives in
lib/Transforms/Utils/Local.cpp (LLVMTransformUtils) from lib/IR/Value.cpp
(LLVMCore). The Core lib doesn't include TransformUtils. The builtbots caught
this here: https://lab.llvm.org/buildbot/#/builders/109/builds/12664. This patch
moves the function, and the 3 similar ones for consistency, into DebugInfo.cpp
which is part of LLVMCore.
Reviewed By: dblaikie, rnk
Differential Revision: https://reviews.llvm.org/D100632
When trying to clamp a constant index into a scalable vector we can
test if the index is less than the minimum number of elements in the
vector. If so, we can simply return the index because we know it is
guaranteed to fit inside the vector.
Differential Revision: https://reviews.llvm.org/D100639
Greedy RA adds copies of virtual registers when splitting live interval.
This stat might be useful.
Reviewers: reames, MatzeB, anemet, thegameg
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100017
If Virtual Register is alive in landing pad its def must be
before the call causing the exception or it should be statepoint instruction itself and
in this case def actually means the relocation of gc pointer and is alive in
landing pad.
The test shows the triggering this check for an option under development
use-registers-for-gc-values-in-landing-pad which is off by default until
it is functionally correct.
Reviewers: reames, void, jyknight, nickdesaulniers, efriedma, arsenm, rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100525
Such attributes can either be unset, or set to "true" or "false" (as string).
throughout the codebase, this led to inelegant checks ranging from
if (Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
to
if (Fn->hasAttribute("no-jump-tables") && Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
Introduce a getValueAsBool that normalize the check, with the following
behavior:
no attributes or attribute set to "false" => return false
attribute set to "true" => return true
Differential Revision: https://reviews.llvm.org/D99299
Instead of managing memory by hand, delegate it to std::vector. This makes the
code much simpler, and also avoids repeatedly computing the storage size.
According to valgrind --tool=callgrind, this also slightly decreases the
instruction count, but by a small margin.
This is a recommit of 82f0e3d3ea with one usage
fixed in llvm/lib/CodeGen/RegisterScavenging.cpp.
Not the slight API change: BitVector::clear() now has the same behavior as any
other container: it does not free memory, but indeed sets the size of the
BitVector to 0. It is thus incorrect to access its content right afterwards, a
scenario which wasn't enforced in previous implementation.
Differential Revision: https://reviews.llvm.org/D100387
Add the `IsText` argument to `GetFile` and `GetFileOrSTDIN` which will help z/OS distinguish between text and binary correctly. This is an extension to [this patch](https://reviews.llvm.org/D97785)
Reviewed By: abhina.sreeskantharajan, amccarth
Differential Revision: https://reviews.llvm.org/D100488
When we pass a AArch64 Homogeneous Floating-Point
Aggregate (HFA) argument with increased alignment
requirements, for example
struct S {
__attribute__ ((__aligned__(16))) double v[4];
};
Clang uses `[4 x double]` for the parameter, which is passed
on the stack at alignment 8, whereas it should be at
alignment 16, following Rule C.4 in
AAPCS (https://github.com/ARM-software/abi-aa/blob/master/aapcs64/aapcs64.rst#642parameter-passing-rules)
Currently we don't have a way to express in LLVM IR the
alignment requirements of the function arguments. The align
attribute is applicable to pointers only, and only for some
special ways of passing arguments (e..g byval). When
implementing AAPCS32/AAPCS64, clang resorts to dubious hacks
of coercing to types, which naturally have the needed
alignment. We don't have enough types to cover all the
cases, though.
This patch introduces a new use of the stackalign attribute
to control stack slot alignment, when and if an argument is
passed in memory.
The attribute align is left as an optimizer hint - it still
applies to pointer types only and pertains to the content of
the pointer, whereas the alignment of the pointer itself is
determined by the stackalign attribute.
For byval arguments, the stackalign attribute assumes the
role, previously perfomed by align, falling back to align if
stackalign` is absent.
On the clang side, when passing arguments using the "direct"
style (cf. `ABIArgInfo::Kind`), now we can optionally
specify an alignment, which is emitted as the new
`stackalign` attribute.
Patch by Momchil Velikov and Lucas Prates.
Differential Revision: https://reviews.llvm.org/D98794
Patchpoint instructions have operands which is actually zero cost
(or the same as register) to use the value from the stack.
In terms of statistic it makes same to separate them.
Move from computation instructions related to stack spill/reload to
number of stack slot referenced.
Reviewers: reames, MatzeB, anemet, thegameg
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100016
Statepoint instruction has a deopt section which is actually live-through the call.
Currently this is handled by special post pass after RA - fixup-statepoint-caller-saved.
This change teaches Greedy RA that if segment of live interval is ended with statepoint
instruction and its reg is used in deopt bundle then this live interval interferes regmask of this statepoint
and as a result caller-saved register cannot be assigned to this live interval.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100296
The IR stack protector pass must insert stack checks before the call instead of
between it and the return.
Similarly, SDAG one should recognize that ADJCALLFRAME instructions could be
part of the terminal sequence of a tail call. In this case because such call
frames cannot be nested in LLVM the stack protection code must skip over the
whole sequence (or risk clobbering argument registers).
We saw some big compiling time impact after enabling the debug entry value
feature for X86 platform(D73534). Compiling time goes from 900s->1600s with
our testcase. It is caused by allocating/freeing the memory busily.
'using FwdRegWorklist = MapVector<unsigned, SmallVector<FwdRegParamInfo, 2>>;'
The value for this map is vector, and we miss the reference when access the
element. The same happens for `auto CalleesMap = MF->getCallSitesInfo();` which is a DenseMap.
Reviewed by: djtodoro, flychen50
Differential Revision: https://reviews.llvm.org/D100162
It breaks up the function pass manager in the codegen pipeline.
With empty parameters, it looks at the -mllvm flag -rewrite-map-file.
This is likely not in use.
Add a check that we only have one function pass manager in the codegen
pipeline.
This required reverting commit 9583a3f2625818b78c0cf6d473cdedb9f23ad82c:
"[AsmPrinter] Delete dead takeDeletedSymbsForFunction()".
This was not NFC as initially thought. By coalescing two function
psas managers, this exposed the reverted code as necessary.
addr-label.ll was crashing due to an emitted blockaddress's block being
removed but the label not emitted.
Some tests relied on the fact that we had a module pass somewhere in the
codegen pipeline.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D99707
Main reason is preparation to transform AliasResult to class that contains
offset for PartialAlias case.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D98027
These cases were failing before, but with cryptic asserts.
Add asserts in the RegScavenger that fail earlier with better
messages. NFC
Differential Revision: https://reviews.llvm.org/D100109
During SelectionDAG, we must track the SDNodes that each SDDbgValue depends on
to compute its value. These are ultimately derived from the location operands to
the SDDbgValue, but were stored in a separate vector prior to this patch. This
resulted in cases where one of the lists was updated incorrectly, resulting in
crashes during compilation. This patch fixes the issue by directly recomputing
the dependency list from the SDDbgOperands in getDependencies().
Differential Revision: https://reviews.llvm.org/D99423
Combine all collected stats into separate struct RAGreedyStats
with add and report methods.
The motivation is to extend the number of statistics to capture and instead of
adding new parameters, just combine all of them into one structure.
Additionally I plan to use report from different places in future to report data
for function as well.
Reviewers: reames, MatzeB, anemet, thegameg
Reviewed By: thegameg
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100012
To save compile time, avoid computation of stats if ORE will not emit it.
The motivation is to add more stats and compute it only if it will dumped.
Reviewers: reames, MatzeB, anemet, thegameg
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100010
Summary: Set the default DwarfInlinedStrings as inlined strings for DBX, due to DBX does not support .dwstr section for now.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D99933
Pseudo probes, when scattered in a block, can be chained dependencies of other regular DAG nodes and block DAG combine optimizations. To fix this, scattered probes in a block are grouped and placed at the beginning of the block. This shouldn't affect the profile quality.
Test Plan:
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D100002
This allows FoldConstantArithmetic to handle SPLAT_VECTOR in
addition to BUILD_VECTOR. This allows it to support scalable
vectors. I'm also allowing fixed length SPLAT_VECTOR which is
used by some targets, but I'm not familiar enough to write tests
for those targets.
I had to block this function from running on CONCAT_VECTORS to
avoid calling getNode for a CONCAT_VECTORS of 2 scalars.
This can happen because the 2 operand getNode calls this
function for any opcode. Previously we were protected because
CONCAT_VECTORs of BUILD_VECTOR is folded to a larger BUILD_VECTOR
before that call. But it's not always possible to fold a CONCAT_VECTORS
of SPLAT_VECTORs, and we don't even try.
This fixes PR49781 where DAG combine thought constant folding
should be possible, but FoldConstantArithmetic couldn't do it.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D99682
I do not see any bit-width restriction from the point of the
LLVM Lang Ref - Operand Bundles on the types of the deopt bundle
operands. Statepoint Lowering seems to be able to work with any
types.
This patch relaxes the two related assertions and adds a new test
for this change.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D100006
Looking at the Doxygen-generated documentation for the llvm namespace
currently shows all sorts of random comments from different parts of the
codebase. These are mostly caused by:
- File doc comments that aren't marked with \file, so they're attached to
the next declaration, which is usually "namespace llvm {".
- Class doc comments placed before the namespace rather than before the
class.
- Code comments before the namespace that (in my opinion) shouldn't be
extracted by doxygen at all.
This commit fixes these comments. The generated doxygen documentation now
has proper docs for several classes and files, and the docs for the llvm
and llvm::detail namespaces are now empty.
Reviewed By: thakis, mizvekov
Differential Revision: https://reviews.llvm.org/D96736
Follow up to a6d2a8d6f5. These were found by simply grepping for "::assume", and are the subset of that result which looked cleaner to me using the isa/dyn_cast patterns.
Problem:
On SystemZ we need to open text files in text mode. On Windows, files opened in text mode adds a CRLF '\r\n' which may not be desirable.
Solution:
This patch adds two new flags
- OF_CRLF which indicates that CRLF translation is used.
- OF_TextWithCRLF = OF_Text | OF_CRLF indicates that the file is text and uses CRLF translation.
Developers should now use either the OF_Text or OF_TextWithCRLF for text files and OF_None for binary files. If the developer doesn't want carriage returns on Windows, they should use OF_Text, if they do want carriage returns on Windows, they should use OF_TextWithCRLF.
So this is the behaviour per platform with my patch:
z/OS:
OF_None: open in binary mode
OF_Text : open in text mode
OF_TextWithCRLF: open in text mode
Windows:
OF_None: open file with no carriage return
OF_Text: open file with no carriage return
OF_TextWithCRLF: open file with carriage return
The Major change is in llvm/lib/Support/Windows/Path.inc to only set text mode if the OF_CRLF is set.
```
if (Flags & OF_CRLF)
CrtOpenFlags |= _O_TEXT;
```
These following files are the ones that still use OF_Text which I left unchanged. I modified all these except raw_ostream.cpp in recent patches so I know these were previously in Binary mode on Windows.
./llvm/lib/Support/raw_ostream.cpp
./llvm/lib/TableGen/Main.cpp
./llvm/tools/dsymutil/DwarfLinkerForBinary.cpp
./llvm/unittests/Support/Path.cpp
./clang/lib/StaticAnalyzer/Core/HTMLDiagnostics.cpp
./clang/lib/Frontend/CompilerInstance.cpp
./clang/lib/Driver/Driver.cpp
./clang/lib/Driver/ToolChains/Clang.cpp
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99426
This is a followup to D98145: As far as I know, tracking of kill
flags in FastISel is just a compile-time optimization. However,
I'm not actually seeing any compile-time regression when removing
the tracking. This probably used to be more important in the past,
before FastRA was switched to allocate instructions in reverse
order, which means that it discovers kills as a matter of course.
As such, the kill tracking doesn't really seem to serve a purpose
anymore, and just adds additional complexity and potential for
errors. This patch removes it entirely. The primary changes are
dropping the hasTrivialKill() method and removing the kill
arguments from the emitFast methods. The rest is mechanical fixup.
Differential Revision: https://reviews.llvm.org/D98294
In order to bring up scalable vector support in LLVM incrementally,
we introduced behaviour to emit a warning, instead of an error, when
asking the wrong question of a scalable vector, like asking for the
fixed number of elements.
This patch puts that behaviour under a flag. The default behaviour is
that the compiler will always error, which means that all LLVM unit
tests and regression tests will now fail when a code-path is taken that
still uses the wrong interface.
The behaviour to demote an error to a warning can be individually enabled
for tools that want to support experimental use of scalable vectors.
This patch enables that behaviour when driving compilation from Clang.
This means that for users who want to try out scalable-vector support,
fixed-width codegen support, or build user-code with scalable vector
intrinsics, Clang will not crash and burn when the compiler encounters
such a case.
This allows us to do away with the following pattern in many of the SVE tests:
RUN: .... 2>%t
RUN: cat %t | FileCheck --check-prefix=WARN
WARN-NOT: warning: ...
The behaviour to emit warnings is only temporary and we expect this flag
to be removed in the future when scalable vector support is more stable.
This patch also has fixes the following tests:
unittests:
ScalableVectorMVTsTest.SizeQueries
SelectionDAGAddressAnalysisTest.unknownSizeFrameObjects
AArch64SelectionDAGTest.computeKnownBitsSVE_ZERO_EXTEND_VECTOR_INREG
regression tests:
Transforms/InstCombine/vscale_gep.ll
Reviewed By: paulwalker-arm, ctetreau
Differential Revision: https://reviews.llvm.org/D98856
The main part of the patch is the change in RegAllocGreedy.cpp: Q.collectInterferringVregs()
needs to be called before iterating the interfering live ranges.
The rest of the patch offers support that is the case: instead of clearing the query's
InterferingVRegs field, we invalidate it. The clearing happens when the live reg matrix
is invalidated (existing triggering mechanism).
Without the change in RegAllocGreedy.cpp, the compiler ices.
This patch should make it more easily discoverable by developers that
collectInterferringVregs needs to be called before iterating.
I will follow up with a subsequent patch to improve the usability and maintainability of Query.
Differential Revision: https://reviews.llvm.org/D98232
If the inner shuffle already contains undef elements, then accept them in the merged shuffle as well.
This helps some X86 HADD/SUB patterns where slow targets were ending up with HADD/SUB because the (un)merged shuffles were stuck either side of the ADD/SUB - meaning we ended up with a total cost much higher than the "2*shuffle+add" that a slow target usually expands a HADD/SUB to.
This allows these optimisations to apply to e.g. `urem i16` directly
before `urem` is promoted to i32 on architectures where i16 operations
are not intrinsically legal (such as on Aarch64). The legalization then
later can happen more directly and generated code gets a chance to avoid
wasting time on computing results in types wider than necessary, in the end.
Seems like mostly an improvement in terms of results at least as far as x86_64 and aarch64 are concerned, with a few regressions here and there. It also helps in preventing regressions in changes like {D87976}.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D88785
GCC warning:
```
/llvm-project/llvm/lib/CodeGen/GlobalISel/CombinerHelper.cpp: In member function ‘bool llvm::CombinerHelper::matchFunnelShiftToRotate(llvm::MachineInstr&)’:
/llvm-project/llvm/lib/CodeGen/GlobalISel/CombinerHelper.cpp:3882:35: warning: ?: using integer constants in boolean context, the expression will always evaluate to ‘true’ [-Wint-in-bool-context]
3882 | Opc == TargetOpcode::G_FSHL ? TargetOpcode::G_ROTL : TargetOpcode::G_ROTR;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
This patch adds 3 methods, one for power-of-2 vectors which use tree
reductions using vector ops, before a final reduction op. For non-pow-2
types it generates multiple narrow reductions and combines the values with
scalar ops.
Differential Revision: https://reviews.llvm.org/D97163
Negative numbers are represented using DW_OP_consts along with signed representation
of the number as the argument.
Test case IR is generated using Fortran front-end.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D99273
Basically a port of isBitfieldExtractOpFromSExtInReg in AArch64ISelDAGToDAG.
This is only done post-legalization for now. Once the legalizer knows how to
decompose these back into shifts, this requirement can probably be removed.
Differential Revision: https://reviews.llvm.org/D99230
Currently needsStackRealignment returns false if canRealignStack returns false.
This means that the behavior of needsStackRealignment does not correspond to
it's name and description; a function might need stack realignment, but if it
is not possible then this function returns false. Furthermore,
needsStackRealignment is not virtual and therefore some backends have made use
of canRealignStack to indicate whether a function needs stack realignment.
This patch attempts to clarify the situation by separating them and introducing
new names:
- shouldRealignStack - true if there is any reason the stack should be
realigned
- canRealignStack - true if we are still able to realign the stack (e.g. we
can still reserve/have reserved a frame pointer)
- hasStackRealignment = shouldRealignStack && canRealignStack (not target
customisable)
Targets can now override shouldRealignStack to indicate that stack realignment
is required.
This change will make it easier in a future change to handle the case where we
need to realign the stack but can't do so (for example when the register
allocator creates an aligned spill after the frame pointer has been
eliminated).
Differential Revision: https://reviews.llvm.org/D98716
Change-Id: Ib9a4d21728bf9d08a545b4365418d3ffe1af4d87
Tomas Matheson