Summary:
Change `import` and `export` parsing to special case the renaming
syntax (`import x, {y as bar} ...`, `export {x}`) and otherwise just
parse a regular structural element.
This simplifies the code a bit and should be more correct - it's easier
to recognise the specific import syntax than to recognise arbitrary
expressions and declarations.
Reviewers: djasper
Subscribers: cfe-commits, klimek
Differential Revision: http://reviews.llvm.org/D19242
llvm-svn: 266743
Indentation of the last line was reset to the initial indentation of the block when reaching EOF.
Patch by Maxime Beaulieu
Differential Revision: http://reviews.llvm.org/D19065
llvm-svn: 266321
Summary: Just to ensure no regressions, this already works fine.
Reviewers: djasper
Subscribers: cfe-commits, klimek
Differential Revision: http://reviews.llvm.org/D18950
llvm-svn: 265922
While I am not personally convinced about the usefulness of this
construct, we should break it.
Before:
if (a) label:
f();
After:
if (a)
label:
f();
llvm-svn: 265545
Summary:
formatAndApplyAllReplacements takes a set of Replacements, applies them on a
Rewriter, and reformats the changed code.
Reviewers: klimek, djasper
Subscribers: ioeric, klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D17852
llvm-svn: 264745
Summary:
Previously, format::getStyle assumes that the given file resides in
the real file system, which prevents the use of virtual file system in testing etc.
This patch adds a parameter in format::getStyle interface so that users can specify
the right file system. By default, the file system is the real file system.
Reviewers: djasper, klimek
Subscribers: cfe-commits, klimek
Differential Revision: http://reviews.llvm.org/D18399
llvm-svn: 264253
"import ... from '...';" and "export ... from '...';" should be treated
the same as goog.require/provide/module/forwardDeclare calls.
Patch by Martin Probst.
llvm-svn: 264055
The operators | and & in types, as opposed to the bitwise operators,
should not have whitespace around them (e.g. `Foo<Bar|Baz>`).
Patch by Martin Probst. Thank you.
llvm-svn: 263961
This patch adds a regular expression to configure suffixes of an
included file to check whether it is the "main" include of the current
file. Previously, clang-format has allowed arbitrary suffixes on the
formatted file, which is still the case when no IncludeMainRegex is
specified.
llvm-svn: 263943
If a call takes a single argument, using AlwaysBreak can lead to lots
of wasted lines and additional indentation without improving the
readability in a significant way.
Before:
caaaaaaaaaaaall(
caaaaaaaaaaaall(
caaaaaaaaaaaall(
caaaaaaaaaaaaaaaaaaaaaaall(aaaaaaaaaaaaaa, aaaaaaaaa))));
After:
caaaaaaaaaaaall(caaaaaaaaaaaall(caaaaaaaaaaaall(
caaaaaaaaaaaaaaaaaaaaaaall(aaaaaaaaaaaaaa, aaaaaaaaa))));
llvm-svn: 263709
Automatic Semicolon Insertion can only be properly handled by parsing
source code. However conservatively catching just a few, common
situations prevents breaking code during development, which greatly
improves usability.
JS code should still use semicolons, and ASI code should be flagged by
a compiler or linter.
Patch by Martin Probst. Thank you.
llvm-svn: 263470
Turns "foo" into 'foo' (or vice versa, depending on configuration).
This makes it more convenient to follow the Google JavaScript style
guide:
https://google.github.io/styleguide/javascriptguide.xml?showone=Strings#Strings
This functionality is behind the option "JavaScriptQuotes", which can be:
* "leave" (no re-quoting)
* "single" (change to single quotes)
* "double" (change to double quotes)
This also changes single quoted JavaScript string literals to be treated
as tok::string_literal, not tok::char_literal, which fixes two unrelated
tests.
Patch by Martin Probst. Thank you.
llvm-svn: 262534
This is a commonly useful feature to have, and we have implemented it
multiple times with different kinds of bugs. This implementation
centralizes the idea in a set of functions that we can then use from the various
tools.
Reverts r262234, which is a revert of r262232, and puts the functions
into FOrmat.h, as they are closely coupled to clang-format, and we
otherwise introduce a cyclic dependency between libFormat and
libTooling.
Patch by Eric Liu.
llvm-svn: 262323
In particular, make it more expensive than breaking after the return
type of a function definition/declaration.
Before:
template <typename T>
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaa<
T>::aaaaaaaaaaaaa(aaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaa);
After:
template <typename T>
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaa<T>::aaaaaaaaaaaaa(
aaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaa);
llvm-svn: 260497
Before:
int i = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa ?
/*bbbbbbbbbbbbbbbbbbbb=*/bbbbbbbbbbbbbbbbbbbbbbbbb :
ccccccccccccccccccccccccccc;
After:
int i = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa ?
/*bbbbbbbbbbbbbbbbbbbb=*/bbbbbbbbbbbbbbbbbbbbbbbbb :
ccccccccccccccccccccccccccc;
llvm-svn: 259670
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"This is the way [autoconf] ends
Not with a bang but a whimper."
-T.S. Eliot
Reviewers: chandlerc, grosbach, bob.wilson, echristo
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D16472
llvm-svn: 258862
clang-format only works for JavaScript code, if all the semicolons are
present anyway, so this linebreak can never be desired.
Before (with appropriate statement lengths or column limit):
return
[ aaa ];
After:
return [
aaaa
];
llvm-svn: 257741
After reading the style guides again, they don't actually say how to
pack or not pack array literals. Based on some user reports, array
initializers can unnecessarily get quite long if they contain many
small elements. Array literals with trailing commas are still formatted
one per line so that users have a way to opt out of the packing.
Before:
var array = [
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa,
aaaaaa
];
After:
var array = [
aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa, aaaaaa,
aaaaaa, aaaaaa
];
llvm-svn: 257615
Before:
export abstract class X {y: number;}
(and all sorts of other havoc in more complicated cases).
After:
export abstract class X { y: number; }
llvm-svn: 257451
As soon as a comment had whitespace changes inside of the token, we
couldn't identify the whole comment as a trailing comment anymore and
alignment stopped working. Add a new boolean to Change for this special
case and fix trailing comment identification to use it.
This also changes WhitespaceManager to sum the length of all Changes
inside of a token into the first Change.
Before this fix
int xy; // a
int z; //b
became
int xy; // a
int z; // b
with this patch we immediately get to:
int xy; // a
int z; // b
Differential Revision: http://reviews.llvm.org/D16058
llvm-svn: 257341
r257257 change the way clang-format enforces line breaks after a
templated type has been line-wrapped. This was to fix an incorrect line
break if BinPackParameters is set to false. However, it also leads to
an unwanted line break in a different case. Thus, for now, only do this
when BinPackParameters is false. This isn't ideal yet, but helps us
until we have a better solution.
With BinPackParameters:
Before:
void fffffffffff(aaaaaaaaaaaaaaaaaaaaaaaaaaa<aaaaaaaaaaaaaaaaaaaaaaa,
aaaaaaaaaa> aaaaaaaaaa);
After:
void fffffffffff(
aaaaaaaaaaaaaaaaaaaaaaaaaaa<aaaaaaaaaaaaaaaaaaaaaaa, aaaaaaaaaa>
aaaaaaaaaa);
llvm-svn: 257325
Previously, all whitespace characters would increase the starting
column, which doesn't make sense. This fixes a problem, e.g. with the
length calculation in JS template strings.
llvm-svn: 257267
Starting here:
int x; // Format this line only.
int xx; //
int xxxxx; //
Before:
int x; // Format this line only.
int xx; //
int xxxxx; //
After:
int x; // Format this line only.
int xx; //
int xxxxx; //
llvm-svn: 257258
Before (example is JS, but also applies to C++):
return [
aaaa()
.bbbbbbbb('A'),
aaaa().bbbbbbbb('B'),
aaaa().bbbbbbbb('C'),
];
After:
return [
aaaa().bbbbbbbb('A'),
aaaa().bbbbbbbb('B'),
aaaa().bbbbbbbb('C'),
];
llvm-svn: 257079
r256750 has been leading to an undesired behavior:
aaaaaaaaaa
.aaaaaaaaaaaaaaaaaaaaaaaa.aaaaaa(aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa);
This change increases penalty for wrapping before member accesses that aren't
calls. Thus, this is again formatted as (as it has been before r256750):
aaaaaaaaaa.aaaaaaaaaaaaaaaaaaaaaaaa.aaaaaa(
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa);
llvm-svn: 256830
Previously, the [] in the following example were recognized as an array
subscript leading to weird indentation.
Before:
var aaaa = aaaaa || // wrap
[];
After:
var aaaa = aaaaa || // wrap
[];
llvm-svn: 256753
initializers. For now, only use it for 20 items or more. Otherwise,
clang-format formats these one-per-line and thus increases the vertical
code size a lot.
llvm-svn: 256246
Before, the first (non-system) header in a file was considered to be
the main include. This is conservative as it makes clang-format change
the #include order less often. Instead implement some basic usage of
the filename itself. With this patch, clang-format considers every
header to be a main include if the header file's basename is a prefix
to the filename the #include is in.
llvm-svn: 256148
This changes the behavior of AlwaysBreakAfterDeclarationReturnType
so that it supports breaking after declarations, definitions, or
both.
Differential Revision: http://reviews.llvm.org/D10370
Reviewed By: Daniel Jasper
llvm-svn: 256046
Specifically, it is sometimes necessary to keep certain #includes as
the first #include, even before the main #include for a .cc file.
Switching the category to be signed instead of unsigned isn't ideal,
but it seems as good of an option as any and is fully backwards
compatible.
llvm-svn: 255757
Revision 251405 added AlwaysBreak to support Google's JavaScript style. This
changeset complete existing AlignsAfterOpenBracket tests to exercise
AlwaysBreak for C++.
I thought this would be worthwhile. With this option we can support request
from http://lists.llvm.org/pipermail/cfe-dev/2015-May/042942.html, that had
been requested a few times. This also partially solve related Bug 23422 and is
probably sufficient for most people.
AlignAfterOpenBracket = FormatStyle::BAS_AlwaysBreak;
BinPackArguments = false;
BinPackParameters = false;
With these setting we obtain this formatting:
void fooWithAVeryLongParamList(
int firstParameter,
int secondParameter
int lastParameter)
{
object.alsoThisDoenstFitSoIBreakImmidiatly(
firstParameter,
secondParameter,
lastParameter);
}
Patch by Jean-Philippe Dufraigne, thank you.
llvm-svn: 255486
before it is not a closing parenthesis.
Otherwise, this frequently leads to "hanging" indents that users
perceive as "weird".
Before:
return !soooooooooooooome_map.insert(
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa)
.second;
After:
return !soooooooooooooome_map
.insert(aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa)
.second;
llvm-svn: 254933
This has seen quite some usage and I am not aware of any issues. Also
add a style option to enable/disable include sorting. The existing
command line flag can from now on be used to override whatever is set
in the style.
llvm-svn: 253202
unaffected lines with incorrect initial indent.
Starting from:
namespace {
int i; // There shouldn't be indentation here.
int j; // <- call clang-format on this line.
}
Before:
namespace {
int i;
int j;
}
After:
namespace {
int i;
int j;
}
llvm-svn: 251824
Summary:
With this change, clang-format stops formatting when either it leaves
the current scope or when it comes back to the initial scope after
going into a nested one.
Reviewers: klimek
Subscribers: cfe-commits, klimek
Differential Revision: http://reviews.llvm.org/D14213
llvm-svn: 251760
Correct handling for C++17 inline namespaces. We would previously fail to
identify the inline namespaces as a namespace name since multiple ones may be
concatenated now with C++17.
llvm-svn: 251690
Summary: This is especially important so that if a change is solely inserting a block around a few statements, clang-format-diff.py will still clean up and add indentation to the inner parts.
Reviewers: klimek
Subscribers: cfe-commits, klimek
Differential Revision: http://reviews.llvm.org/D14105
llvm-svn: 251474
Specifically, don't wrap between the {} of an empty constructor if the
"}" falls on column 81 and ConstructorInitializerAllOnOneLineOrOnePerLine
is set.
llvm-svn: 251406
Summary:
If this option is set, clang-format will always insert a line wrap, e.g.
before the first parameter of a function call unless all parameters fit
on the same line. This obviates the need to make a decision on the
alignment itself.
Use this style for Google's JavaScript style and add some minor tweaks
to correctly handle nested blocks etc. with it. Don't use this option
for for/while loops.
Reviewers: klimek
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D14104
llvm-svn: 251405
clang accepts both #include and #import for includes (the latter having an
implicit header guard). Let clang-format interleave both types if
--sort-includes is passed. #import is used frequently in Objective-C code.
http://reviews.llvm.org/D13853
llvm-svn: 250909
If a RegExp contains a character group with a quote (/["]/), the
trailing end of it is first tokenized as a string literal, which leads
to the merging code seeing an unbalanced bracket.
This change parses regex literals from the left hand side. That
simplifies the parsing code and also allows correctly handling escapes
and character classes, hopefully correctly parsing all regex literals.
Patch by Martin Probst, thank you.
Review: http://reviews.llvm.org/D13765
llvm-svn: 250648
Slashes in regular expressions do not need to be escaped and do not
terminate the regular expression even without a preceding backslash.
Patch by Martin Probst. Thank you.
llvm-svn: 250009
Fixes this bug: https://llvm.org/bugs/show_bug.cgi?id=24504
TokenAnnotator::spaceRequiredBetween was handling TT_ForEachMacro but
not TT_ObjCForIn, so lines that look like:
for (id nextObject in (NSArray *)myArray)
would incorrectly turn into:
for (id nextObject in(NSArray *)myArray)
Patch by Kent Sutherland, thank you.
llvm-svn: 249553
aligning assignments.
This was done correctly when aligning the declarations, but not when
aligning assignments.
FIXME: The code between assignments and declarations alignment is
roughly duplicated and
would benefit from factorization.
Bug 25090: https://llvm.org/bugs/show_bug.cgi?id=25090
Patch by Beren Minor. Thank you.
llvm-svn: 249552
This was made much easier by introducing an IncludeCategory struct to
replace the previously used std::pair.
Also, cleaned up documentation and added examples.
llvm-svn: 249392
This allows clang-format to align identifiers in consecutive
declarations. This is useful for increasing the readability of the code
in the same way the alignment of assignations is.
The code is a slightly modified version of the consecutive assignment
alignment code. Currently only the identifiers are aligned, and there is
no support of alignment of the pointer star or reference symbol.
The patch also solve the issue of alignments not being possible due to
the ColumnLimit for both the existing AlignConsecutiveAligments and the
new AlignConsecutiveDeclarations.
Patch by Beren Minor, thank you.
Review: http://reviews.llvm.org/D12362
llvm-svn: 248999
control the individual braces. The existing choices for brace wrapping
are now merely presets for the different flags that get expanded upon
calling the reformat function.
All presets have been chose to keep the existing formatting, so there
shouldn't be any difference in formatting behavior.
Also change the dump_format_style.py to properly document the nested
structs that are used to keep these flags discoverable among all the
configuration flags.
llvm-svn: 248802
Recognize the main module header as well as different #include categories.
This should now mimic the behavior of llvm/utils/sort_includes.py as
well as clang-tools-extra/clang-tidy/llvm/IncludeOrderCheck.cpp very
closely.
llvm-svn: 248782
JavaScript allows keywords to appear in IdenfierName positions, e.g.
fields, or object literal members, but not as plain identifiers.
Patch by Martin Probst. Thank you!
llvm-svn: 248714
To implement this nicely, add a function that merges two sets of
replacements that are meant to be done in sequence. This functionality
will also be useful for other applications, e.g. formatting the result
of clang-tidy fixes.
llvm-svn: 248367
It wasn't correctly handling this case:
int oneTwoThree = 123;
int oneTwo = 12;
method();
Review: http://reviews.llvm.org/D12369
Patch by Beren Minor. Thank you!
llvm-svn: 248254
Martin Probst