If LoopInfo is available during GVN, BasicAA will use it. However
MergeBlockIntoPredecessor does not update LI as it merges blocks.
This didn't use to cause problems because LI was freed before
GVN/BasicAA. Now with OptimizationRemarkEmitter, the lifetime of LI is
extended so LI needs to be kept up-to-date during GVN.
Differential Revision: https://reviews.llvm.org/D27288
llvm-svn: 288307
Support a new assembler directive, .import_global, to declare imported
global variables (i.e. those with external linkage and no
initializer). The linker turns these into wasm imports.
Patch by Jacob Gravelle
Differential Revision: https://reviews.llvm.org/D26875
llvm-svn: 288296
Choosing a "cfi" name makes the intend a bit clearer in an assembly dump
and more importantly the assembly dumps are slightly more stable as the
numbers don't move around anymore when unrelated code calls
createTempSymbol() more or less often.
As they are temp labels the name doesn't influence the generated object
code.
Differential Revision: https://reviews.llvm.org/D27244
llvm-svn: 288290
Maintain the command line resolutions as a map to a list of resolutions
rather than a single resolution, and apply the resolutions in the order
observed. This is not only simpler but allows us to test the scenario where
the two symbols have different resolutions.
Differential Revision: https://reviews.llvm.org/D27285
llvm-svn: 288288
The LLDB tests are now ready for this patch.
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. Use this for branch targets and some
other cases that have no specified source location, to prevent
inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 288283
Summary:
When using thin archives, and processing the same archive multiple times, we were mangling existing entries. The root cause is that we were calling computeRelativePath() more than once. Here, we only call it when adding new members to an archive.
Note that D27218 changes the way thin archives are printed, and will break the new unit test included here. Depending on which one lands first, the other will need to be slightly modified.
Reviewers: rafael, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27217
llvm-svn: 288280
Summary:
This is preparation for ThunderX processors that have Large
System Extension (LSE) atomic instructions, but not the
other instructions introduced by V8.1a.
This will mimic changes to GCC as described here:
https://gcc.gnu.org/ml/gcc-patches/2015-06/msg00388.html
LSE instructions are: LD/ST<op>, CAS*, SWP
Reviewers: t.p.northover, echristo, jmolloy, rengolin
Subscribers: aemerson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26621
llvm-svn: 288279
This implements PGO-driven loop peeling.
The basic idea is that when the average dynamic trip-count of a loop is known,
based on PGO, to be low, we can expect a performance win by peeling off the
first several iterations of that loop.
Unlike unrolling based on a known trip count, or a trip count multiple, this
doesn't save us the conditional check and branch on each iteration. However,
it does allow us to simplify the straight-line code we get (constant-folding,
etc.). This is important given that we know that we will usually only hit this
code, and not the actual loop.
This is currently disabled by default.
Differential Revision: https://reviews.llvm.org/D25963
llvm-svn: 288274
Summary:
When computing useful bits for a BFM instruction, we need
to take into consideration the case where both operands
of the BFM are equal and provide data that we need to track.
Not doing this can cause us to miss useful bits.
Fixes PR31138 (https://llvm.org/bugs/show_bug.cgi?id=31138)
Reviewers: t.p.northover, jmolloy
Subscribers: evandro, gberry, srhines, pirama, mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D27130
llvm-svn: 288253
This is the first part of an effort to add wasm binary
support across all llvm tools.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D26172
llvm-svn: 288251
Initial support for target shuffle constant folding in cases where all shuffle inputs are constant. We may be able to relax this and merge shuffles with only some constant inputs in the future.
I've added the helper function getTargetConstantBitsFromNode (based off a similar function in X86ShuffleDecodeConstantPool.cpp) that could be reused for other cases requiring constant vector extraction.
Differential Revision: https://reviews.llvm.org/D27220
llvm-svn: 288250
Summary: Previously 0 and -1 was matched via tablegen rules. But this could cause problems where a physical register was being used where a virtual register was expected (seen in optimizeSelect and TwoAddressInstructionPass). Instead follow AArch64 and match in DAGToDAGISel.
Reviewers: eliben, majnemer
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27171
llvm-svn: 288215
This commit caused some miscompiles that did not show up on any of the bots.
Reverting until we can investigate the cause of those failures.
llvm-svn: 288214
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. Use this for branch targets and some
other cases that have no specified source location, to prevent
inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 288212
This program is for testing features that rely on multi-module bitcode files.
It takes a multi-module bitcode file, extracts one of the modules and writes
it to the output file.
Differential Revision: https://reviews.llvm.org/D26778
llvm-svn: 288201
Michel Dänzer reported that r288051, "[StructurizeCFG] Use range-based
for loops", introduced a bug into rebuildSSA, wherein we were iterating
over an instruction's use list while modifying it, without taking care
to do this correctly.
llvm-svn: 288200
In some cases the leading headers of the file name, archive member and
architecture slice name in the output of lvm-objdump is not wanted so the
tool’s output can be directly used by scripts. This matches the -X option
of the Apple otool(1) program.
rdar://28491674
llvm-svn: 288199
This interface allows clients to write multiple modules to a single
bitcode file. Also introduce the llvm-cat utility which can be used
to create a bitcode file containing multiple modules.
Differential Revision: https://reviews.llvm.org/D26179
llvm-svn: 288195
This is not in the list of valid inputs for the encoding.
When spilling, copies from exec can be folded directly
into the spill instruction which results in broken
stores.
This only fixes the operand constraints, more codegen
work is required to avoid emitting the invalid
spills.
This sort of breaks the dbg.value test. Because the
register class of the s_load_dwordx2 changes, there
is a copy to SReg_64, and the copy is the operand
of dbg_value. The copy is later dead, and removed
from the dbg_value.
llvm-svn: 288191
It isn't generally safe to fold the frame index
directly into the operand since it will possibly
not be an inline immediate after it is expanded.
This surprisingly seems to produce better code, since
the FI doesn't prevent folding other immediate operands.
llvm-svn: 288185
Summary:
In AArch64InstrInfo::foldMemoryOperandImpl, catch more cases where the
COPY being spilled is copying from WZR/XZR, but the source register is
not in the COPY destination register's regclass.
For example, when spilling:
%vreg0 = COPY %XZR ; %vreg0:GPR64common
without this change, the code in TargetInstrInfo::foldMemoryOperand()
and canFoldCopy() that normally handles cases like this would fail to
optimize since %XZR is not in GPR64common. So the spill code generated
would be:
%vreg0 = COPY %XZR
STR %vreg
instead of the new code generated:
STR %XZR
Reviewers: qcolombet, MatzeB
Subscribers: mcrosier, aemerson, t.p.northover, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26976
llvm-svn: 288176
This patch corresponds to review:
https://reviews.llvm.org/D25912
This is the first patch in a series of 4 that improve the lowering and combining
for BUILD_VECTOR nodes on PowerPC.
llvm-svn: 288152
Currently SLP vectorizer tries to vectorize a binary operation and dies
immediately after unsuccessful the first unsuccessfull attempt. Patch
tries to improve the situation, trying to vectorize all binary
operations of all children nodes in the binop tree.
Differential Revision: https://reviews.llvm.org/D25517
llvm-svn: 288115
This way, when the linker adds padding between globals, we can skip over
the zero padding bytes and reliably find the start of the next metadata
global.
llvm-svn: 288096
It looks like this logic was duplicated long ago and the GCC side of
things has grown additional functionality. We need ${:uid} at least to
generate unique MS inline asm labels (PR23715), so expose these.
llvm-svn: 288092
Add the checking for both the MachO::fat_header and the
MachO::fat_arch struct values in the constructor for
MachOUniversalBinary. Such that when the constructor
for ObjectForArch is called it can assume the values in
the MachO::fat_arch for the offset and size are contained
in the file after the MachOUniversalBinary constructor
is called for the Parent.
llvm-svn: 288084
Preserving lifetime markers isn't as important as allowing promotion,
so just drop the lifetime markers if necessary.
This also fixes an assertion failure where other parts of SROA assumed
that lifetime markers never block promotion.
Fixes https://llvm.org/bugs/show_bug.cgi?id=29139.
Differential Revision: https://reviews.llvm.org/D24854
llvm-svn: 288074
Codegen prepare sinks comparisons close to a user is we have only one register
for conditions. For AMDGPU we have many SGPRs capable to hold vector conditions.
Changed BE to report we have many condition registers. That way IR LICM pass
would hoist an invariant comparison out of a loop and codegen prepare will not
sink it.
With that done a condition is calculated in one block and used in another.
Current behavior is to store workitem's condition in a VGPR using v_cndmask_b32
and then restore it with yet another v_cmp instruction from that v_cndmask's
result. To mitigate the issue a propagation of source SGPR pair in place of v_cmp
is implemented. Additional side effect of this is that we may consume less VGPRs
at a cost of more SGPRs in case if holding of multiple conditions is needed, and
that is a clear win in most cases.
Differential Revision: https://reviews.llvm.org/D26114
llvm-svn: 288053
Bit-shifts by a whole number of bytes can be represented as a shuffle mask suitable for combining.
Added a 'getFauxShuffleMask' function to allow us to create shuffle masks from other suitable operations.
llvm-svn: 288040
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
llvm-svn: 288031
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
llvm-svn: 288029
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
llvm-svn: 288028
In r286814, the algorithm for calculating inline costs changed. This
caused more inlining to take place which is especially apparent
in optsize and minsize modes.
As the cost calculation removed a skewed behaviour (we were inconsistent
about the cost of calls) it isn't possible to update the thresholds to
get exactly the same behaviour as before. However, this threshold change
accounts for the very common case where an inline candidate has no
calls within it. In this case, r286814 would inline around 5-6 more (IR)
instructions.
The changes to -Oz have been heavily benchmarked. The "obvious" value
for the inline threshold at -Oz is zero, but due to inaccuracies in the
inline heuristics this can actually cause code size increases due to
not inlining key thunk functions (that then disappear). Experimentally,
5 was the sweet spot for code size over the test-suite.
For -Os, this change removes the outlier results shown up by green dragon
(http://104.154.54.203/db_default/v4/nts/13248).
Fixes D26848.
llvm-svn: 288024
Note that the non-splat lshr+lshr test folded, but that does not
work in general. Something is missing or wrong in computeKnownBits
as the non-splat shl+shl test still shows.
llvm-svn: 288005
Summary: When selectScalarSSELoad is looking for a scalar_to_vector of a scalar load, it makes sure the load is only used by the scalar_to_vector. But it doesn't make sure the scalar_to_vector is only used once. This can cause the same load to be folded multiple times. This can be bad for performance. This also causes the chain output to be duplicated, but not connected to anything so chain dependencies will not be satisfied.
Reviewers: RKSimon, zvi, delena, spatel
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D26790
llvm-svn: 287983
Summary:
Shuffle lowering may have widened the element size of a i32 shuffle to i64 before selecting X86ISD::SHUF128. If this shuffle was used by a vselect this can prevent us from selecting masked operations.
This patch detects this and changes the element size to match the vselect.
I don't handle changing integer to floating point or vice versa as its not clear if its better to push such a bitcast to the inputs of the shuffle or to the user of the vselect. So I'm ignoring that case for now.
Reviewers: delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27087
llvm-svn: 287939
Summary:
The iterative algorithm for Loop Unswitching may render some of the branches unreachable in the unswitched loops.
Given the exponential nature of the algorithm, this is quite an overhead.
This patch fixes this problem by selectively unswitching only those branches within a loop that are reachable from the loop header.
Reviewers: Michael Zolothukin, Anna Thomas, Weiming Zhao.
Subscribers: llvm-commits.
Differential Revision: http://reviews.llvm.org/D26299
llvm-svn: 287925
This patch corrects the behaviour of code such as:
.local foo
jal foo
foo:
to use the correct jal expansion when writing ELF files.
Patch by: Daniel Sanders
Reviewers: zoran.jovanovic, seanbruno, vkalintiris
Differential Revision: https://reviews.llvm.org/D24722
llvm-svn: 287918
Vectorize UINT_TO_FP v2i32 -> v2f64 instead of scalarization (albeit still on the SIMD unit).
The codegen matches that generated by legalization (and is in fact used by AVX for UINT_TO_FP v4i32 -> v4f64), but has to be done in the x86 backend to account for legalization via 4i32.
Differential Revision: https://reviews.llvm.org/D26938
llvm-svn: 287886
The bug arises during register allocation on i686 for
CMPXCHG8B instruction when base pointer is needed. CMPXCHG8B
needs 4 implicit registers (EAX, EBX, ECX, EDX) and a memory address,
plus ESI is reserved as the base pointer. With such constraints the only
way register allocator would do its job successfully is when the addressing
mode of the instruction requires only one register. If that is not the case
- we are emitting additional LEA instruction to compute the address.
It fixes PR28755.
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D25088
llvm-svn: 287875
m0 may need to be written for spill code, so
we don't want general code uses relying on the
value stored in it.
This introduces a few code quality regressions where copies
from m0 are not coalesced into copies of a copy of m0.
llvm-svn: 287841
The size and offset were wrong. The size of the object was
being used for the size of the access, when here it is really
being split into 4-byte accesses. The underlying object size
is set in the MachinePointerInfo, which also didn't have the
offset set.
llvm-svn: 287806
This patch fixes a small bug where symbols defined in the INIT
and FINI sections were incorrectly getting a type of 'n'.
Differential Revision: https://reviews.llvm.org/D26937
llvm-svn: 287803
Undefined and weak symbols don't have a meaningful size or value.
As such, nothing should be printed for those attributes (this is
already done for the address with 'U') with the BSD format. This
matches what GNU nm does.
Note that for the POSIX.2 format [1] zero values are still
printed for the size and value. This seems in spirit with
the format strings in that specification, but is debatable.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/
Differential Revision: https://reviews.llvm.org/D26936
llvm-svn: 287802
We did not support subregs in InlineSpiller:foldMemoryOperand() because targets
may not deal with them correctly.
This adds a target hook to let the spiller know that a target can handle
subregs, and actually enables it for x86 for the case of stack slot reloads.
This fixes PR30832.
Differential Revision: https://reviews.llvm.org/D26521
llvm-svn: 287792
-symbols prints both .symtab and .dynsym symbols for GNU style in ELF.
-dyn-symbols prints symbols looking up through hash tables. This helps validate hash tables.
llvm-svn: 287786
Summary:
The "getVectorizablePrefix" method would give up if it found an aliasing load for a store chain.
In practice, the aliasing load can be treated as a memory barrier and all stores that precede it
are a valid vectorizable prefix.
Issue found by volkan in D26962. Testcase is a pruned version of the one in the original patch.
Reviewers: jlebar, arsenm, tstellarAMD
Subscribers: mzolotukhin, wdng, nhaehnle, anna, volkan, llvm-commits
Differential Revision: https://reviews.llvm.org/D27008
llvm-svn: 287781
Forward store values to matching loads down through token
factors. Factored from D14834.
Reviewers: jyknight, hfinkel
Subscribers: hfinkel, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D26080
llvm-svn: 287773
We have the following DAGCombiner transformations:
(mul (shl X, c1), c2) -> (mul X, c2 << c1)
(mul (shl X, C), Y) -> (shl (mul X, Y), C)
(shl (mul x, c1), c2) -> (mul x, c1 << c2)
Usually the constant shift is optimised by SelectionDAG::getNode when it is
constructed, by SelectionDAG::FoldConstantArithmetic, but when we're dealing
with vectors and one of those vector constants contains an undef element
FoldConstantArithmetic does not fold and we enter an infinite loop.
Fix this by making FoldConstantArithmetic use getNode to decide how to fold each
vector element, the same as FoldConstantVectorArithmetic does, and rather than
adding the constant shift to the work list instead only apply the transformation
if it's already been folded into a constant, as if it's not we're going to loop
endlessly. Additionally add missing NoOpaques to one of those transformations,
which I noticed when writing the tests for this.
Differential Revision: https://reviews.llvm.org/D26605
llvm-svn: 287766
Implemented widening (v2f32) and splitting (v16f64).
On splitting, I use "popcnt" to calculate memory increment.
More type legalization work will come in the next patches.
llvm-svn: 287761
Without this test, you can just remove the code fixing the
switch to the first constant in ResolvedUndefs in and everything
pass. This test, instead, fails with an assertion if the code
is removed. Found while refactoring SCCP to integrate undef in
the solver.
llvm-svn: 287731
We visit and/or, we try to derive a lattice value for the
instruction even if one of the operands is overdefined.
If the non-overdefined value is still 'unknown' just return and wait
for ResolvedUndefsIn to "plug in" the correct value. This simplifies
the logic a bit. While I'm here add tests for missing cases.
llvm-svn: 287709
In PR27925:
https://llvm.org/bugs/show_bug.cgi?id=27925
...we proposed adding this fold to eliminate a bitcast. In D20774, there was
some concern about changing the type of a bitwise op as well as creating
bitcasts that might not be free for a target. However, if we're strictly
eliminating an instruction (by limiting this to one-use ops), then we should
be able to do this in InstCombine.
But we're cautiously restricting the transform for now to vector types to
avoid possible backend problems. A transform to make sure the logic op is
legal for the target should be added to reverse this transform and improve
codegen.
Differential Revision: https://reviews.llvm.org/D26641
llvm-svn: 287707
This occurs during UINT_TO_FP v2f64 lowering.
We can easily generalize this to other horizontal ops (FHSUB, PACKSS, PACKUS) as required - we are doing something similar with PACKUS in lowerV2I64VectorShuffle
llvm-svn: 287676
Add missing unaligned store macros (ush/usw) and fix the exisiting
implementation of the unaligned load macros in order to generate
identical expansions with the GNU assembler.
llvm-svn: 287646
Simon Pilgrim