Add basic ComputeNumSignBits support for TRUNCATE ops for cases where the source's number of sign bits overlaps with the truncated size.
Improves X86 SIGN_EXTEND_IN_REG vector cases which were needlessly sign extending boolean vector results.
Differential Revision: https://reviews.llvm.org/D26851
llvm-svn: 287635
Summary:
The index and one of the table operands can be swapped by changing the opcode to the other version. Neither of these operands are the one that can load from memory so this can't be used to increase memory folding opportunities.
We need to handle the unmasked forms and the kz forms. Since the load operand isn't being commuted we can commute the load and broadcast instructions too.
Reviewers: igorb, delena, Ayal, Farhana, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25652
llvm-svn: 287621
We would attempt to access the symbol section without ensuring that the symbol
was not absolute. When the assembler referenced relocation is not evaluated to
the absolute, but when we record the relocation, we would query the section.
Because the symbol is absolute, it does not have a section associated with it,
triggering an assertion. Just be more careful about the access of the section.
Addresses PR31064!
llvm-svn: 287619
Summary:
Shuffle lowering widens the element size of a shuffle if elements are contiguous. This is sometimes help because wider element types have more shuffle options. If the shuffle is one of the arguments to a vselect this shuffle widening can introduce a bitcast between the vselect and the shuffle. This will prevent isel from selecting a masked operation. If the shuffle can be written equally efficiently with a different element size to match the vselect type we should change the shuffle type to allow masking.
This patch does this conversion for all VALIGND/VALIGNQ sizes. It also supports turning 128-bit PALIGNR into VALIGND/VALIGNQ. This fixes the case shown in PR31018.
I plan to add support for more operations in future patches.
Reviewers: RKSimon, zvi, delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26902
llvm-svn: 287612
A target intrinsic may be defined as possibly reading memory,
but the call site may have additional knowledge that it doesn't read
memory. The intrinsic lowering will expect the pessimistic
assumption of the intrinsic definition, so the chain should
still be used.
llvm-svn: 287593
Summary:
When searching for load/store instructions to pair/merge don't treat
writes to WZR/XZR as clobbers since they don't change the value read
from WZR/XZR (which is always 0).
Reviewers: mcrosier, junbuml, jmolloy, t.p.northover
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26921
llvm-svn: 287592
Summary:
Previously, CGP would unconditionally sink addrspacecast instructions,
even going so far as to sink them into a loop.
Now we check that the cast is "cheap", as defined by TLI.
We introduce a new "is-cheap" function to TLI rather than using
isNopAddrSpaceCast because some GPU platforms want the ability to ask
for non-nop casts to be sunk.
Reviewers: arsenm, tra
Subscribers: jholewinski, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D26923
llvm-svn: 287591
Allow using an instruction other than a mul or phi as the base for
root-finding. For example, the included testcase includes a loop
which requires using a getelementptr as the base for root-finding.
Differential Revision: https://reviews.llvm.org/D26529
llvm-svn: 287588
This is a first step towards canonicalization and improved folding/codegen
for integer min/max as discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/106868.html
Here, we're just matching the simplest min/max patterns and adjusting the
icmp predicate while swapping the select operands.
I've included FIXME tests in test/Transforms/InstCombine/select_meta.ll
so it's easier to see how this might be extended (corresponds to the TODO
comment in the code). That's also why I'm using matchSelectPattern()
rather than a simpler check; once the backend is patched, we can just
remove some of the restrictions to allow the obfuscated min/max patterns
in the FIXME tests to be matched.
Differential Revision: https://reviews.llvm.org/D26525
llvm-svn: 287585
Summary:
This is similar to what was done for Darwin in rL264645 /
http://reviews.llvm.org/D16737, but it uses COFF COMDATs to achive the
same result instead of relying on new custom linker features.
As on MachO, this creates one metadata global per instrumented global.
The metadata global is placed in the custom .ASAN$GL section, which the
ASan runtime will iterate over during initialization. There are no other
references to the metadata, so normal linker dead stripping would
discard it. However, the metadata is put in a COMDAT group with the
instrumented global, so that it will be discarded if and only if the
instrumented global is discarded.
I didn't update the ASan ABI version check since this doesn't affect
non-Windows platforms, and the WinASan ABI isn't really stable yet.
Implementing this for ELF will require extending LLVM IR and MC a bit so
that we can use non-COMDAT section groups.
Reviewers: pcc, kcc, mehdi_amini, kubabrecka
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26770
llvm-svn: 287576
Summary:
D26704 fixed the non-determinism in codegen by sorting basic blocks before
iteration so as to have a defined iteration order. As a result we need to fix
the names (numbers) of the temporaries in the following unit tests:
test/Transforms/Util/MemorySSA/multi-edges.ll
test/Transforms/Util/MemorySSA/multiple-backedges-hal.ll
Reviewers: dberlin, david2050, mgrang
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26926
llvm-svn: 287575
This patch adds the seq macro.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
Reviewers: zoran.jovanovic, vkalintiris, seanbruno
Differential Revision: https://reviews.llvm.org/D24607
llvm-svn: 287573
Enable codeview emission for windows-itanium targets. Co-opt an existing
test (which is derived from a C source file and should therefore be
identical across the Itanium and MS ABIs).
Differential Revision: https://reviews.llvm.org/D26693
llvm-svn: 287567
This patch fixes the non-determinism caused due to iterating SmallPtrSet's
which was uncovered due to the experimental "reverse iteration order " patch:
https://reviews.llvm.org/D26718
The following unit tests failed because of the undefined order of iteration.
LLVM :: Transforms/Util/MemorySSA/cyclicphi.ll
LLVM :: Transforms/Util/MemorySSA/many-dom-backedge.ll
LLVM :: Transforms/Util/MemorySSA/many-doms.ll
LLVM :: Transforms/Util/MemorySSA/phi-translation.ll
Reviewers: dberlin, mgrang
Subscribers: dberlin, llvm-commits, david2050
Differential Revision: https://reviews.llvm.org/D26704
llvm-svn: 287563
Summary: Merging an empty case block into the header block of switch could cause
ISel to add COPY instructions in the header of switch, instead of the case
block, if the case block is used as an incoming block of a PHI. This could
potentially increase dynamic instructions, especially when the switch is in a
loop. I added a test case which was reduced from the benchmark I was targetting.
Reviewers: t.p.northover, mcrosier, manmanren, wmi, davidxl
Subscribers: qcolombet, danielcdh, hfinkel, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22696
llvm-svn: 287553
Currently LLVM assumes that a pointer addrspacecasted to a different addr space is equivalent to trunc or zext bitwise, which is not true. For example, in amdgcn target, when a null pointer is addrspacecasted from addr space 4 to 0, its value is changed from i64 0 to i32 -1.
This patch teaches LLVM not to assume known bits of addrspacecast instruction to its operand.
Differential Revision: https://reviews.llvm.org/D26803
llvm-svn: 287545
This commit makes llvm-cov avoid showing 0% (0/0) coverage for things
like file function coverage, etc. in reports and HTML output. This can happen
for files like headers that have macros but no functions. This commit makes
llvm-cov report - (0/0) instead.
rdar://29246480
Differential Revision: https://reviews.llvm.org/D26615
llvm-svn: 287539
The test is currently broken, and this CL should fix it.
Patch by Adrian Kuegel!
Differential Revision: https://reviews.llvm.org/D26910
llvm-svn: 287536
At the moment we only use truncateVectorCompareWithPACKSS with direct vector comparison results (just one example of a known all/none signbits input).
This change relaxes the direct matching of a SETCC opcode by moving the logic up into SelectionDAG::ComputeNumSignBits and accepting any input with a known splatted signbit.
llvm-svn: 287535
On some architectures (s390x, ppc64, sparc64, mips), C-level int is passed
as i32 signext instead of plain i32. Likewise, unsigned int may be passed
as i32, i32 signext, or i32 zeroext depending on the platform. Mark
__llvm_profile_instrument_target properly (its last parameter is unsigned
int).
This (together with the clang change) makes compiler-rt profile testsuite pass
on s390x.
Differential Revision: http://reviews.llvm.org/D21736
llvm-svn: 287534
- teach RelocVisitor to recognize bpf relocations
- fix AsmInfo->PointerSize to make sure dwarf is emitted correctly
- add a test for the above
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287521
This patch adds a test for the assembly code emitted with XRay
instrumentation. It also fixes a bug where the operand of a jump
instruction must be not the number of bytes to jump over, but rather the
number of 4-byte instructions.
Author: rSerge
Reviewers: dberris, rengolin
Differential Revision: https://reviews.llvm.org/D26805
llvm-svn: 287516
The tail call optimization was being used without proper consideration of
ABI requirements for saving and restoring the GP. This patch restricts tail
call optimization to functions within the same translation unit.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D24763
llvm-svn: 287505
Many of these problems are because shuffle lowering widens element size and reduces element count when possible. This causes the shuffle to become separated from the select by a bitcast. Future patches will work to improve these cases by rewriting the shuffle back to a narrow element type if we think it can result in folding the mask.
llvm-svn: 287503
The change is part of RegCall calling convention support for LLVM.
Long double (f80) requires special treatment as the first f80 parameter is saved in FP0 (floating point stack).
This review present the change and the corresponding tests.
Differential Revision: https://reviews.llvm.org/D26151
llvm-svn: 287485
add BPF disassembler, so tools like llvm-objdump can be used:
$ llvm-objdump -d -no-show-raw-insn ./sockex1_kern.o
./sockex1_kern.o: file format ELF64-BPF
Disassembly of section socket1:
bpf_prog1:
0: r6 = r1
8: r0 = *(u8 *)skb[23]
10: *(u32 *)(r10 - 4) = r0
18: r1 = *(u32 *)(r6 + 4)
20: if r1 != 4 goto 8
28: r2 = r10
30: r2 += -4
ld_imm64 (the only 16-byte insn) and special ld_abs/ld_ind instructions
had to be treated in a special way. The decoders for the rest of the insns
are automatically generated.
Add tests to cover new functionality.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287477
It seems that because ThinLTO does not import the full module,
some invariant of the type mapper are broken.
In Monolithic LTO, we import every globals: when calling
IRLinker::copyFunctionProto() on @foo(), we end-up calling
TypeMapTy::get(FTy) on the type of @foo(), which will map
%0 and record the destination as opaque.
ThinLTO skips this because @foo is not imported and goes directly
to the next stage.
Next we call computeTypeMapping() that map the types for each
globals, and ends up checking for type isomorphism, and may add
type mapping. However it doesn't record if there was an opaque
destination type that was resolved.
Instead of lazily "discovering" opaque type in the destination
module on the go, we change the TypeFinder to eagerly record all
types and not only the named ones.
Differential Revision: https://reviews.llvm.org/D26840
llvm-svn: 287453
Summary:
This will also be added to the LTO API, right now this will
bring ThinLTO on par with Monolithic LTO on Darwin.
Reviewers: anemet
Subscribers: tejohnson, llvm-commits
Differential Revision: https://reviews.llvm.org/D26886
llvm-svn: 287450
This is a prerequisite patch for D26556:
https://reviews.llvm.org/D26556
...because there was no direct coverage for these folds (which in some cases are adding instructions).
llvm-svn: 287400
It is used to drive this from the clang driver via -mllvm.
Same option name is used as in opt.
Differential Revision: https://reviews.llvm.org/D26832
llvm-svn: 287356
During Module linking, it's possible for SrcM->getIdentifiedStructTypes();
to return types that are actually defined in the destination module
(DstM). Depending on how the bitcode file was read,
getIdentifiedStructTypes() might do a walk over all values, including
metadata nodes, looking for types. In my case, a debug info metadata
node was shared between the two modules, and it referred to a type
defined in the destination module (see test case).
Differential Revision: https://reviews.llvm.org/D26212
llvm-svn: 287353
Summary:
The 32-bit instructions don't zero the high 16-bits like the 16-bit
instructions do.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D26828
llvm-svn: 287342
insertUniqueBackedgeBlock in lib/Transforms/Utils/LoopSimplify.cpp now
propagates existing llvm.loop metadata to newly the added backedge.
llvm::TryToSimplifyUncondBranchFromEmptyBlock in lib/Transforms/Utils/Local.cpp
now propagates existing llvm.loop metadata to the branch instructions in the
predecessor blocks of the empty block that is removed.
Differential Revision: https://reviews.llvm.org/D26495
llvm-svn: 287341
Summary:
The addr64-based legalization is incorrect for MUBUF instructions with idxen
set as well as for BUFFER_LOAD/STORE_FORMAT_* instructions. This affects
e.g. shaders that access buffer textures.
Since we never actually need the addr64-legalization in shaders, this patch
takes the easy route and keys off the calling convention. If this ever
affects (non-OpenGL) compute, the type of legalization needs to be chosen
based on some TSFlag.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98664
Reviewers: arsenm, tstellarAMD
Subscribers: kzhuravl, wdng, yaxunl, tony-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D26747
llvm-svn: 287339
When we see a SETCC whose only users are zero extend operations, we can replace
it with a subtraction. This results in doing all calculations in GPRs and
avoids CR use.
Currently we do this only for ULT, ULE, UGT and UGE condition codes. There are
ways that this can be extended. For example for signed condition codes. In that
case we will be introducing additional sign extend instructions, so more careful
profitability analysis may be required.
Another direction to extend this is for equal, not equal conditions. Also when
users of SETCC are any_ext or sign_ext, we might be able to do something
similar.
llvm-svn: 287329
This is a straightforward extension of the existing support for 32/64-bit element types. Just needed to add the additional instrinsics to the switches.
llvm-svn: 287316
The same thing was done to 32-bit and 64-bit element sizes previously.
This will allow us to support these shuffls in InstCombineCalls along with the other variable shift intrinsics.
llvm-svn: 287312
since bpf instruction set was introduced people learned to
read and understand kernel verifier output whereas llvm asm
output stayed obscure and unknown. Convert llvm to emit
assembler text similar to kernel to avoid this discrepancy
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 287300
Summary:
This extends FCOPYSIGN support to 512-bit vectors.
I've also added tests to show what the 128-bit and 256-bit cases look like with broadcast loads.
Reviewers: delena, zvi, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26791
llvm-svn: 287298
vXi64 multiplication is lowered into 3 calls of vpmuludq with the upper/lower 32-bit halves.
If any of these halves are zero then we can remove individual calls. Although there was isBuildVectorAllZeros code to do this I don't think it ever worked (maybe just for constant folded cases that don't seem to be tested for any longer).
This requires additional X86ISD support for computeKnownBitsForTargetNode, so far I've just added support for X86ISD::VZEXT (VPMOVZX* - helping the AVX2+ cases).
Partial fix for PR30845
Differential Revision: https://reviews.llvm.org/D26590
llvm-svn: 287223
Summary:
Variadic functions can be treated in the same way as normal functions
with respect to the number and types of parameters.
Reviewers: grosbach, olista01, t.p.northover, rengolin
Subscribers: javed.absar, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D26748
llvm-svn: 287219
Register Calling Convention defines a new behavior for v64i1 types.
This type should be saved in GPR.
However for 32 bit machine we need to split the value into 2 GPRs (because each is 32 bit).
Differential Revision: https://reviews.llvm.org/D26181
llvm-svn: 287217
ImplicitNullCheck keeps track of one instruction that the memory
operation depends on that it also hoists with the memory operation.
When hoisting this dependency, it would sometimes clobber a live-in
value to the basic block we were hoisting the two things out of. Fix
this by explicitly looking for such dependencies.
I also noticed two redundant checks on `MO.isDef()` in IsMIOperandSafe.
They're redundant since register MachineOperands are either Defs or Uses
-- there is no third kind. I'll change the checks to asserts in a later
commit.
llvm-svn: 287213
Summary:
For flat loop, even if it is hot, it is not a good idea to unroll in runtime, thus we set a lower partial unroll threshold.
For hot loop, we set a higher unroll threshold and allows expensive tripcount computation to allow more aggressive unrolling.
Reviewers: davidxl, mzolotukhin
Subscribers: sanjoy, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D26527
llvm-svn: 287186
This pass splits globals into elements using inrange annotations on
getelementptr indices.
Differential Revision: https://reviews.llvm.org/D22295
llvm-svn: 287178
We save an inter-register file move this way. If there's any CPU where
the FP logic is slower, we could transform this back to int-logic in
MachineCombiner.
This helps, but doesn't solve, PR6137:
https://llvm.org/bugs/show_bug.cgi?id=6137
The 'andn' test shows that we're missing a pattern match to
recognize the xor with -1 constant as a 'not' op.
llvm-svn: 287171
No real functional change with this commit.
The problem with report_fatal_error() is it does not include the tool name
and the file name the for which the error message was generated.
Uses of report_fatal_error() were change to report_error() or error()
to get a better error and to make the code smaller and cleaner.
Also changed things like error(errorToErrorCode(SOrErr.takeError())) to
use report_error() with a file name and the llvm::Error (as well as the
ArchitectureName if available) so the error message is printed.
llvm-svn: 287163
Summary:
A lot of the pseudo instructions are required because LLVM assumes that
all integers of the same size as the pointer size are legal. This means
that it will not currently expand 16-bit instructions to their 8-bit
variants because it thinks 16-bit types are legal for the operations.
This also adds all of the CodeGen tests that required the pass to run.
Reviewers: arsenm, kparzysz
Subscribers: wdng, mgorny, modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D26577
llvm-svn: 287162
We don't track callee clobbered registers correctly, so avoid hoisting
across calls.
Note: for this bug to trigger we need a `readonly` call target, since we
already have logic to not hoist across potentially storing instructions
either.
llvm-svn: 287159
One half of the shifts obviously needed conditional selection based on whether
the shift amount is more than 32-bits, but leaving the other half as the
natural shift isn't acceptable either: it's undefined behaviour to shift a
32-bit value by more than 31.
llvm-svn: 287149
Summary:
Extend replaceZeroVectorStore to handle more vector type stores,
floating point zero vectors and set alignment more accurately on split
stores.
This is a follow-up change to r286875.
This change fixes PR31038.
Reviewers: MatzeB
Subscribers: mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26682
llvm-svn: 287142
Summary:
1. Don't try to copy values to and from the same register class.
2. Replace copies with of registers with immediate values with v_mov/s_mov
instructions.
The main purpose of this change is to make MachineSink do a better job of
determining when it is beneficial to split a critical edge, since the pass
assumes that copies will become move instructions.
This prevents a regression in uniform-cfg.ll if we enable critical edge
splitting for AMDGPU.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: https://reviews.llvm.org/D23408
llvm-svn: 287131
We can replace "scalar" FP-bitwise-logic with other forms of bitwise-logic instructions.
Scalar SSE/AVX FP-logic instructions only exist in your imagination and/or the bowels of
compilers, but logically equivalent int, float, and double variants of bitwise-logic
instructions are reality in x86, and the float variant may be a shorter instruction
depending on which flavor (SSE or AVX) of vector ISA you have...so just prefer float all
the time.
This is a preliminary step towards solving PR6137:
https://llvm.org/bugs/show_bug.cgi?id=6137
Differential Revision:
https://reviews.llvm.org/D26712
llvm-svn: 287122
Both the (V)CVTDQ2PD (i32 to f64) and (V)CVTUDQ2PD (u32 to f64) conversion instructions are lossless and can be safely represented as generic SINT_TO_FP/UINT_TO_FP calls instead of x86 intrinsics without affecting final codegen.
LLVM counterpart to D26686
Differential Revision: https://reviews.llvm.org/D26736
llvm-svn: 287108
MipsFastISel uses a a class to represent addresses with a signed member
to represent the offset. MipsFastISel::emitStore, emitLoad and computeAddress
all treated the offset as being positive. In cases where the offset was
actually negative and a frame pointer was used, this would cause the constant
synthesis routine to crash as it would generate an unexpected instruction
sequence when frame indexes are replaced.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D26192
llvm-svn: 287099
This patch adds the single operand form of the not alias to microMIPS and
MIPS along with additional tests.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 287097
Summary: These intrinsics have been unused for clang for a while. This patch removes them. We auto upgrade them to extractelements, a scalar operation and then an insertelement. This matches the sequence used by clangs intrinsic file.
Reviewers: zvi, delena, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26660
llvm-svn: 287083
This has two advantages:
1) We slowly move away from ErrorOr to the new handling interface,
in the hope of having an uniform error handling in LLVM, eventually.
2) We're starting to have *meaningful* error messages for invalid
object ELF files, rather than a generic "parse error". At some point
we should include also the offset to improve the quality of the
diagnostic.
llvm-svn: 287081
Doing this before register allocation reduces register pressure as we do
not even have to allocate a register for those dead definitions.
Differential Revision: https://reviews.llvm.org/D26111
llvm-svn: 287076
In https://reviews.llvm.org/D25347, Geoff noticed that we still have
useless copy that we can eliminate after register allocation. At the
time the allocation is chosen for those copies, they are not useless
but, because of changes in the surrounding code, later on they might
become useless.
The Greedy allocator already has a mechanism to deal with such cases
with a late recoloring. However, we missed to record the some of the
missed hints.
This commit fixes that.
llvm-svn: 287070
Summary:
We don't do BypassSlowDivision when the denominator is a constant, but
we do do it when the numerator is a constant.
This patch makes two related changes to BypassSlowDivision when the
numerator is a constant:
* If the numerator is too large to fit into the bypass width, don't
bypass slow division (because we'll never run the smaller-width
code).
* If we bypass slow division where the numerator is a constant, don't
OR together the numerator and denominator when determining whether
both operands fit within the bypass width. We need to check only the
denominator.
Reviewers: tra
Subscribers: llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D26699
llvm-svn: 287062
For the default, small and medium code model, use the existing
difference from the jump table towards the label. For all other code
models, setup the picbase and use the difference between the picbase and
the block address.
Overall, this results in smaller data tables at the expensive of one or
two more arithmetic operation at the jump site. Given that we only create
jump tables with a lot more than two entries, it is a net win in size.
For larger code models the assumption remains that individual functions
are no larger than 2GB.
Differential Revision: https://reviews.llvm.org/D26336
llvm-svn: 287059
wbinvl.* are vector instruction that do not sue vector registers.
v2: check only M?BUF instructions
Differential Revision: https://reviews.llvm.org/D26633
llvm-svn: 287056
To get a good error message for all files that could contain Mach-O
files the code in llvm-objdump needs to use the archive member name
and name of the architecture of a slice of a universal file in those cases
where the error come from a Mach-O file in an archive or a universal file.
Most of this is fixed by moving the call to checkSymbolTable() into
ProcessMachO() and calling it when the operation needs the symbol
table. And then calling the form of report_error() that has the
ArchiveName and ArchitectureName arguments. One other place
needed to call this form of report_error() also with these arguments.
Also changed the code in MachODump.cpp to not use report_fatal_error()
and use report_error() instead to make the code smaller and cleaner. All
cases of this are for errors with the symbol table which should now never
be tripped since checkSymbolTable() should be called first to get a good
error message in these cases.
llvm-svn: 287050
This patch adds support for instrumenting masked loads and stores under
ASan, if they have a constant mask.
isInterestingMemoryAccess now supports returning a mask to be applied to
the loads, and instrumentMop will use it to generate additional checks.
Added tests for v4i32 v8i32, and v4p0i32 (~v4i64) for both loads and
stores (as well as a test to verify we don't add checks to non-constant
masks).
Differential Revision: https://reviews.llvm.org/D26230
llvm-svn: 287047
Lower a = b * C where C = (2^n + 1) * 2^m to
add w0, w0, w0, lsl n
lsl w0, w0, m
Differential Revision: https://reviews.llvm.org/D229245
llvm-svn: 287019
The wave barrier represents the discardable barrier. Its main purpose is to
carry convergent attribute, thus preventing illegal CFG optimizations. All lanes
in a wave come to convergence point simultaneously with SIMT, thus no special
instruction is needed in the ISA. The barrier is discarded during code generation.
Differential Revision: https://reviews.llvm.org/D26585
llvm-svn: 287007
Also, fix the test params to use an attribute rather than a CPU model
and remove the AVX run because that does nothing but check for a 'v'
prefix in all of these tests.
llvm-svn: 287003
In RateRegister of existing LSR, if a formula contains a Reg which is a SCEVAddRecExpr,
and this SCEVAddRecExpr's loop is an outerloop, the formula will be marked as Loser
and dropped.
Suppose we have an IR that %for.body is outerloop and %for.body2 is innerloop. LSR only
handle inner loop now so only %for.body2 will be handled.
Using the logic above, formula like
reg(%array) + reg({1,+, %size}<%for.body>) + 1*reg({0,+,1}<%for.body2>) will be dropped
no matter what because reg({1,+, %size}<%for.body>) is a SCEVAddRecExpr type reg related
with outerloop. Only formula like
reg(%array) + 1*reg({{1,+, %size}<%for.body>,+,1}<nuw><nsw><%for.body2>) will be kept
because the SCEVAddRecExpr related with outerloop is folded into the initial value of the
SCEVAddRecExpr related with current loop.
But in some cases, we do need to share the basic induction variable
reg{0 ,+, 1}<%for.body2> among LSR Uses to reduce the final total number of induction
variables used by LSR, so we don't want to drop the formula like
reg(%array) + reg({1,+, %size}<%for.body>) + 1*reg({0,+,1}<%for.body2>) unconditionally.
From the existing comment, it tries to avoid considering multiple level loops at the same time.
However, existing LSR only handles innermost loop, so for any SCEVAddRecExpr with a loop other
than current loop, it is an invariant and will be simple to handle, and the formula doesn't have
to be dropped.
Differential Revision: https://reviews.llvm.org/D26429
llvm-svn: 286999
Summary:
This fixes the runtime results produces by the fallback multiplication expansion introduced in r270720.
For tests I created a fuzz tester that compares the results with Boost.Multiprecision.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26628
llvm-svn: 286998
When both WidenIV::getWideRecurrence and WidenIV::getExtendedOperandRecurrence
return non-null but different WideAddRec, if getWideRecurrence is called
before getExtendedOperandRecurrence, we won't bother to call
getExtendedOperandRecurrence again. But As we know it is possible that after
SCEV folding, we cannot prove the legality using the SCEVAddRecExpr returned
by getWideRecurrence. Meanwhile if getExtendedOperandRecurrence returns non-null
WideAddRec, we know for sure that it is legal to do widening for current instruction.
So it is better to put getExtendedOperandRecurrence before getWideRecurrence, which
will increase the chance of successful widening.
Differential Revision: https://reviews.llvm.org/D26059
llvm-svn: 286987
This patch helps avoids poor legalization of boolean vector results (e.g. 8f32 -> 8i1 -> 8i16) that feed into SINT_TO_FP by inserting an early SIGN_EXTEND and so help improve the truncation logic.
This is not necessary for AVX512 targets where boolean vectors are legal - AVX512 manages to lower ( sint_to_fp vXi1 ) into some form of ( select mask, 1.0f , 0.0f ) in most cases.
Fix for PR13248
Differential Revision: https://reviews.llvm.org/D26583
llvm-svn: 286979
The register usage algorithm incorrectly treats instructions whose value is
not used within the loop (e.g. those that do not produce a value).
The algorithm first calculates the usages within the loop. It iterates over
the instructions in order, and records at which instruction index each use
ends (in fact, they're actually recorded against the next index, as this is
when we want to delete them from the open intervals).
The algorithm then iterates over the instructions again, adding each
instruction in turn to a list of open intervals. Instructions are then
removed from the list of open intervals when they occur in the list of uses
ended at the current index.
The problem is, instructions which are not used in the loop are skipped.
However, although they aren't used, the last use of a value may have been
recorded against that instruction index. In this case, the use is not deleted
from the open intervals, which may then bump up the estimated register usage.
This patch fixes the issue by simply moving the "is used" check after the loop
which erases the uses at the current index.
Differential Revision: https://reviews.llvm.org/D26554
llvm-svn: 286969
This patch implements all the overloads for vec_xl_be and vec_xst_be. On BE,
they behaves exactly the same with vec_xl and vec_xst, therefore they are
simply implemented by defining a matching macro. On LE, they are implemented
by defining new builtins and intrinsics. For int/float/long long/double, it
is just a load (lxvw4x/lxvd2x) or store(stxvw4x/stxvd2x). For char/char/short,
we also need some extra shuffling before or after call the builtins to get the
desired BE order. For int128, simply call vec_xl or vec_xst.
llvm-svn: 286967
Summary:
Fix a case where the overflow value of type i1, which is legal on AVX512, was assigned to a VK1 register class.
We always want this value to be assigned to a GPR since the overflow return value is lowered to a SETO instruction.
Fixes pr30981.
Reviewers: mkuper, igorb, craig.topper, guyblank, qcolombet
Subscribers: qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D26620
llvm-svn: 286958
This patch adds the Sched Machine Model for Cortex-R52.
Details of the pipeline and descriptions are in comments
in file ARMScheduleR52.td included in this patch.
Reviewers: rengolin, jmolloy
Differential Revision: https://reviews.llvm.org/D26500
llvm-svn: 286949
Summary:
Add basic functionality to support call lowering for X86.
Currently only supports functions which return void and take zero arguments.
Inspired by commit 286573.
Reviewers: ab, qcolombet, t.p.northover
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26593
llvm-svn: 286935
Permit specifying the match length (the `-n` or `--bytes` option). The
deprecated `-[length]` form is not supported as an option. This allows the
strings tool to display only the specified length strings rather than the
hardcoded default length of >= 4.
llvm-svn: 286914
Implement the Newton series for square root, its reciprocal and reciprocal
natively using the specialized instructions in AArch64 to perform each
series iteration.
Differential revision: https://reviews.llvm.org/D26518
llvm-svn: 286907
This was causing us to create duplicate metadata on global variables.
Debug info test case by Adrian Prantl, additional test cases by me.
Fixes PR31012.
Differential Revision: https://reviews.llvm.org/D26622
llvm-svn: 286905
This adds support for TSan C++ exception handling, where we need to add extra calls to __tsan_func_exit when a function is exitted via exception mechanisms. Otherwise the shadow stack gets corrupted (leaked). This patch moves and enhances the existing implementation of EscapeEnumerator that finds all possible function exit points, and adds extra EH cleanup blocks where needed.
Differential Revision: https://reviews.llvm.org/D26177
llvm-svn: 286893
The philosophy of the error checking in libObject for Mach-O files
is that the constructor will check the load commands so for their
tables the offsets and sizes are properly contained in the file.
But there is no checking of the entries of any of the tables.
For the contents of the tables themselves the methods accessing
the contents of the entries return errors as needed. In some
cases this however makes it difficult or cumbersome to produce
a good error message which would include the tool name, file name,
archive member, and name of the architecture of a slice of a universal file
the error occurred in.
So idea is that there will be a method to check a table which can
be called up front before using it allowing a good error message
to be produced before a table is used. And if only verification of
the Mach-O file and its tables are wanted a new possible method
checkAllTables() could be added to call all of the methods to
check all the tables at some time when such methods exist.
The checkSymbolTable() is the first of such methods to check
one of the Mach-O file tables. This method initially will used in
llvm-objdump’s DisassembleMachO() routine before it gets the
section and symbol information. As if there are problems with
the symbol table currently the error is first encountered by the
bool operator() in the SymbolSorter() struct which passed to
std::sort(). In this case there is no context as to the file name
the symbol which results a poor error message:
LLVM ERROR: truncated or malformed object (bad string index: 22 for symbol at index 1)
with the added call to the checkSymbolTable() method the
error message includes the tool name and file name:
llvm-objdump: 'macho-invalid-symbol-strx': truncated or malformed object (bad string table index: 22 past the end of string table, for symbol at index 1)
llvm-svn: 286887
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
Fixed usage of std::sort so that we (hopefully) use instantiations that
actually exist in GCC 4.8.
llvm-svn: 286881
Summary:
Replace a splat of zeros to a vector store by scalar stores of WZR/XZR.
The load store optimizer pass will merge them to store pair stores.
This should be better than a movi to create the vector zero followed by
a vector store if the zero constant is not re-used, since one
instructions and one register live range will be removed.
For example, the final generated code should be:
stp xzr, xzr, [x0]
instead of:
movi v0.2d, #0
str q0, [x0]
Reviewers: t.p.northover, mcrosier, MatzeB, jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26561
llvm-svn: 286875
Summary:
We have always speculatively promoted all renamable local values
(except const non-address taken variables) for both the exporting
and importing module. We would then internalize them back based on
the ThinLink results if they weren't actually exported. This is
inefficient, and results in unnecessary renames. It also meant we
had to check the non-renamability of a value in the summary, which
was already checked during function importing analysis in the ThinLink.
Made renameModuleForThinLTO (which does the promotion/renaming) instead
use the index when exporting, to avoid unnecessary renames/promotions.
For importing modules, we can simply promoted all values as any local
we import by definition is exported and needs promotion.
This required changes to the method used by the FunctionImport pass
(only invoked from 'opt' for testing) and when invoked from llvm-link,
since neither does a ThinLink. We simply conservatively mark all locals
in the index as promoted, which preserves the current aggressive
promotion behavior.
I also needed to change an llvm-lto based test where we had previously
been aggressively promoting values that weren't importable (aliasees),
but now will not promote.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26467
llvm-svn: 286871
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
llvm-svn: 286866
add an intrinsic to expose the 'VSX Scalar Convert Half-Precision to
Single-Precision' instruction.
Differential review: https://reviews.llvm.org/D26536
llvm-svn: 286862
Summary:
Extend image intrinsics to support data types of V1F32 and V2F32.
TODO: we should define a mapping table to change the opcode for data type of V2F32 but just one channel is active,
even though such case should be very rare.
Reviewers:
tstellarAMD
Differential Revision:
http://reviews.llvm.org/D26472
llvm-svn: 286860
This restores the rest of r286297 (part was restored in r286475).
Specifically, it restores the part requiring adding a dependency from
the Analysis to Object library (downstream use changed to correctly
model split BitReader vs BitWriter libraries).
Original description of this part of patch follows:
Module level asm may also contain defs of values. We need to prevent
export of any refs to local values defined in module level asm (e.g. a
ref in normal IR), since that also requires renaming/promotion of the
local. To do that, the summary index builder looks at all values in the
module level asm string that are not marked Weak or Global, which is
exactly the set of locals that are defined. A summary is created for
each of these local defs and flagged as NoRename.
This required adding handling to the BitcodeWriter to look at GV
declarations to see if they have a summary (rather than skipping them
all).
Finally, added an assert to IRObjectFile::CollectAsmUndefinedRefs to
ensure that an MCAsmParser is available, otherwise the module asm parse
would silently fail. Initialized the asm parser in the opt tool for use
in testing this fix.
Fixes PR30610.
llvm-svn: 286844
The Stack slot coloring pass removes a store that is followed by a load
that deal with the same stack slot. The function isLoadFromStackSlot
is supposed to consider the loads that have no side-effects. This
patch fixed the issue by removing the unsafe loads from this function
Eg:
%vreg0<def> = L2_loadruh_io <fi#15>, 0
S2_storeri_io <fi#15>, 0, %vreg0
In this case, we load an unsigned extended half word and store this in to
the same stack slot. The Stack slot coloring pass considers safe to remove
the store. This patch marked all the non-vector byte and half word loads as
unsafe.
llvm-svn: 286843
Add explicit v16i16/v32i8 ADD/SUB costs, matching the costs of v4i64/v8i32 - they were missing for some reason.
This has side effects on the LV max bandwidth tests (AVX1 now prefers 128-bit vectors vs AVX2 which still prefers 256-bit)
llvm-svn: 286832
Also,
Revert "test: remove the archive before modifying it"
Revert "test: explicitly use gnu format"
This reverts commits r286778, r286729 and r286767, as they are randomly failing
on many bots (AArch64, x86_64).
llvm-svn: 286820
When calculating the cost of a call instruction we were applying a heuristic penalty as well as the cost of the instruction itself.
However, when calculating the benefit from inlining we weren't discounting the equivalent penalty for the call instruction that would be removed! This caused skew in the calculation and meant we wouldn't inline in the following, trivial case:
int g() {
h();
}
int f() {
g();
}
llvm-svn: 286814
-Don't print the 'x' suffix for the 128-bit reg/mem VEX encoded instructions in Intel syntax. This is consistent with the EVEX versions.
-Don't print the 'y' suffix for the 256-bit reg/reg VEX encoded instructions in Intel or AT&T syntax. This is consistent with the EVEX versions.
-Allow the 'x' and 'y' suffixes to be used for the reg/mem forms when we're assembling using Intel syntax.
-Allow the 'x' and 'y' suffixes on the reg/reg EVEX encoded instructions in Intel or AT&T syntax. This is consistent with what VEX was already allowing.
This should fix at least some of PR28850.
llvm-svn: 286787
`c++filt` when given no arguments runs as a REPL, decoding each line as a
decorated name. Unify the test structure to be more uniform, with the tests for
llvm-cxxfilt living under test/tools/llvm-cxxfilt.
llvm-svn: 286777
nThis avoids the nasty problems caused by using
memory instructions that read the exec mask while
spilling / restoring registers used for control flow
masking, but only for VI when these were added.
This always uses the scalar stores when enabled currently,
but it may be better to still try to spill to a VGPR
and use this on the fallback memory path.
The cache also needs to be flushed before wave termination
if a scalar store is used.
llvm-svn: 286766
These will be used to replace the masked intrinsics so that InstCombineCalls can optimize the AVX-512 variable shifts the same way it does for AVX2.
llvm-svn: 286754
Until we have handling for ignoring unloaded sections, simplify the logic to
the point of triviality. This fixes the scanning of archives, particularly when
embedded in archives.
llvm-svn: 286727
After this I'll add the unmasked intrinsics to InstCombineCalls to finish making our handling of these types of shuffles consistent between AVX-512 and the legacy intrinsics.
llvm-svn: 286725
Clear cross-target test dependencies when using LLVM_OCAML_OUT_OF_TREE,
in order to make it possible to run check-llvm-bindings-ocaml without
rebuilding the whole LLVM.
Differential Revision: https://reviews.llvm.org/D26580
llvm-svn: 286720
Summary:
This is the first step towards being able to add the avx512 shift by immediate intrinsics to InstCombineCalls where we aleady support the sse2 and avx2 intrinsics. We need to the unmasked versions so we can avoid having to teach InstCombineCalls that it would need to insert selects sometimes. Instead we'll just add the selects around the new instrinsics in the frontend.
This change should also enable the shift by i32 intrinsics to take a non-constant shift value just like the avx2 and sse intrinsics. This will enable us to fix PR30691 once we update clang.
Next I'll switch clang to use the new builtins. Then we'll come back to the backend and remove/autoupgrade the old intrinsics. Then I'll work on the same series for variable shifts.
Reviewers: RKSimon, zvi, delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26333
llvm-svn: 286711
Summary: VALIGND and VALIGNQ are similar to PALIGNR but instead of working on a 128-bit lane they work on the entire vector register. This change leverages the shuffle rotate detection code used for PALIGNR to detect these cases.
Reviewers: delena, RKSimon
Subscribers: Farhana, llvm-commits
Differential Revision: https://reviews.llvm.org/D26297
llvm-svn: 286709
Summary:
This pass was assuming that when a PHI instruction defined a register
used by another PHI instruction that the defining insstruction would
be legalized before the using instruction.
This assumption was causing the pass to not legalize some PHI nodes
within divergent flow-control.
This fixes a bug that was uncovered by r285762.
Reviewers: nhaehnle, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D26303
llvm-svn: 286676
This implements a function annotation that disables TSan checking for the
function at run time. The benefit over attribute((no_sanitize("thread")))
is that the accesses within the callees will also be suppressed.
The motivation for this attribute is a guarantee given by the objective C
language that the calls to the reference count decrement and object
deallocation will be synchronized. To model this properly, we would need
to intercept all ref count decrement calls (which are very common in ObjC
due to use of ARC) and also every single message send. Instead, we propose
to just ignore all accesses made from within dealloc at run time. The main
downside is that this still does not introduce any synchronization, which
means we might still report false positives if the code that relies on this
synchronization is not executed from within dealloc. However, we have not seen
this in practice so far and think these cases will be very rare.
Differential Revision: https://reviews.llvm.org/D25858
llvm-svn: 286663
This is PR28376.
Unfortunately given the current structure of optimization diagnostics we
lack the capability to tell whether the user has
passed -Rpass-analysis=loop-vectorize since this is local to the
front-end (BackendConsumer::OptimizationRemarkHandler).
So rather than printing this even if the user has already
passed -Rpass-analysis, this patch just punts and stops recommending
this option. I don't think that getting this right is worth the
complexity.
Differential Revision: https://reviews.llvm.org/D26563
llvm-svn: 286662
This patch corresponds to review:
https://reviews.llvm.org/D26480
Adds all the intrinsics used for various permute builtins that will
be added to altivec.h.
llvm-svn: 286638
When a function pointer is replaced with a jumptable pointer, special
case is needed to preserve the semantics of extern_weak functions.
Since a jumptable entry can not be extern_weak, we emulate that
behaviour by replacing all references to F (the extern_weak function)
with the following expression: F != nullptr ? JumpTablePtr : nullptr.
Extra special care is needed for global initializers, since most (or
probably all) backends can not lower an initializer that includes
this kind of constant expression. Initializers like that are replaced
with a global constructor (i.e. a runtime initializer).
llvm-svn: 286636
Summary:
Fix off-by-one indexing error in loop checking that inserted value was a
splat vector.
Add code to check that INSERT_VECTOR_ELT nodes constructing the splat
vector have the expected constant index values.
Reviewers: t.p.northover, jmolloy, mcrosier
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D26409
llvm-svn: 286616
The current implementation is emitting a global constant that happens
to evaluate to the same bytes + relocation as a jump instruction on
X86. This does not work for PIE executables and shared libraries
though, because we end up with a wrong relocation type. And it has no
chance of working on ARM/AArch64 which use different relocation types
for jump instructions (R_ARM_JUMP24) that is never generated for
data.
This change replaces the constant with module-level inline assembly
followed by a hidden declaration of the jump table. Works fine for
ARM/AArch64, but has some drawbacks.
* Extra symbols are added to the static symbol table, which inflate
the size of the unstripped binary a little. Stripped binaries are not
affected. This happens because jump table declarations must be
external (because their body is in the inline asm).
* Original functions that were anonymous are now named
<original name>.cfi, and it affects symbolization sometimes. This is
necessary because the only user of these functions is the (inline
asm) jump table, so they had to be added to @llvm.used, which does
not allow unnamed functions.
llvm-svn: 286611
This is a partial revert of r244615 (http://reviews.llvm.org/D11942),
which caused a major regression in debug info quality.
Turning the artificial __MergedGlobal symbols into private symbols
(l__MergedGlobal) means that the linker will not include them in the
symbol table of the final executable. Without a symbol table entry
dsymutil is not be able to process the debug info for any of the
merged globals and thus drops the debug info for all of them.
This patch is enabling the old behavior for all MachO targets while
leaving all other targets unaffected.
rdar://problem/29160481
https://reviews.llvm.org/D26531
llvm-svn: 286607
This patch corresponds to review:
https://reviews.llvm.org/D26307
Adds all the intrinsics used for various conversion builtins that will
be added to altivec.h. These are type conversions between various types of
vectors.
llvm-svn: 286596
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
llvm-svn: 286587
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
llvm-svn: 286586
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
llvm-svn: 286585
addSchedBarrierDeps() is supposed to add use operands to the ExitSU
node. The current implementation adds uses for calls/barrier instruction
and the MBB live-outs in all other cases. The use
operands of conditional jump instructions were missed.
Also added code to macrofusion to set the latencies between nodes to
zero to avoid problems with the fusing nodes lingering around in the
pending list now.
Differential Revision: https://reviews.llvm.org/D25140
llvm-svn: 286544
There is no need to track dependencies for constant physregs, as they
don't change their value no matter in what order you read/write to them.
Differential Revision: https://reviews.llvm.org/D26221
llvm-svn: 286526
If the inrange keyword is present before any index, loading from or
storing to any pointer derived from the getelementptr has undefined
behavior if the load or store would access memory outside of the bounds of
the element selected by the index marked as inrange.
This can be used, e.g. for alias analysis or to split globals at element
boundaries where beneficial.
As previously proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-July/102472.html
Differential Revision: https://reviews.llvm.org/D22793
llvm-svn: 286514
When copying to/from a constant register interferences can be ignored.
Also update the documentation for isConstantPhysReg() to make it more
obvious that this transformation is valid.
Differential Revision: https://reviews.llvm.org/D26106
llvm-svn: 286503
Currently runtime metadata is emitted as an ELF section with name .AMDGPU.runtime_metadata.
However there is a standard way to convey vendor specific information about how to run an ELF binary, which is called vendor-specific note element (http://www.netbsd.org/docs/kernel/elf-notes.html).
This patch lets AMDGPU backend emits runtime metadata as a note element in .note section.
Differential Revision: https://reviews.llvm.org/D25781
llvm-svn: 286502
The r283656 did this in the remark arguments. We also need to do this
in the main function attribute as that is written to YAML as well.
llvm-svn: 286482
This restores the part of r286297 that didn't require adding a
dependency from the Analysis to Object library. There are two parts
to the original fix, and this will address the handling for the case
where locals are used in module level asm.
The part that requires functionality in libObject handles local defs
in module level asm, and was reverted because our downstream build
of clang builds lib/Bitcode into a single library, and this new
dependency introduced a cycle there. I am trying to get that fixed
(see D26502), so for now that change isn't being restored
llvm-svn: 286475
Note that the existing metadata checking was re-added by hand because the
script doesn't currently know how to generate checks for lines outside of
functions.
llvm-svn: 286460
We were failing to extract a constant splat shift value if the shifted value was being masked.
The (shl (and (setcc) N01CV) N1CV) -> (and (setcc) N01CV<<N1CV) combine was unnecessarily preventing this.
llvm-svn: 286454
These examples are variations that were inspired from a small subgraph taken
from paper.ll which are interesting as they show certain issues with infinite
loops.
llvm-svn: 286450
The version of this instruction with the .w suffix already correctly accepts
this, but the alias without the .w did not.
Differential Revision: https://reviews.llvm.org/D26499
llvm-svn: 286446
Removing the limitation in visitInsertElementInst() causes several regressions
because we're not prepared to fold sequences of shuffles or inserts and extracts
separated by shuffles. Fixing that appears to be a difficult mission because we
are purposely trying to avoid creating shuffles with arbitrary shuffle masks
because some targets may choke on those.
https://llvm.org/bugs/show_bug.cgi?id=30923
llvm-svn: 286423
Summary: This adds all of the CodeGen tests which currently pass.
Reviewers: arsenm, kparzysz
Subscribers: japaric, wdng
Differential Revision: https://reviews.llvm.org/D26388
llvm-svn: 286418
Summary:
The change will test the change in r286159.
The idea behind the change: Make the dbg location different between loop header and preheader/exit. Originally, dbg location 21 exists in 3 BBs: preheader, header, critical edge (exit). Update the debug location of inside the loop header from !21 to !22 so that it will reflect the correct location.
Reviewers: probinson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26428
llvm-svn: 286403
For pairs of 32-bit registers: isub_lo, isub_hi.
For pairs of vector registers: vsub_lo, vsub_hi.
Add generic subreg indices: ps_sub_lo, ps_sub_hi, and a function
HexagonRegisterInfo::getHexagonSubRegIndex(RegClass, GenericSubreg)
that returns the appropriate subreg index for RegClass.
llvm-svn: 286377
Scalar Evolution asserts when not all the operands of an Add Recurrence
Expression are loop invariants. Loop Strength Reduction should only
create affine Add Recurrences, so that both the start and the step of
the expression are loop invariants.
Differential Revision: https://reviews.llvm.org/D26185
llvm-svn: 286347
This patch adds support for fptoui to 2i32 from both 2f64 and 2f32, building on Simon's change for the signed version in r284459 and using AVX-512 instructions.
If we don't have VLX support we need to use a 512-bit operation for v2f64->v2i32 and extract the result.
It also recognises that cvttpd2udq zeroes the upper 64-bits of the xmm result.
Differential Revision: https://reviews.llvm.org/D26331
llvm-svn: 286345
Summary: This allows the SSE intrinsic to use the EVEX instruction when available. It also fixes EVEX to not use a weird (v4i32 (fp_to_sint v2f64)) node and it merges some isel patterns. This also fixes some cases that weren't combining vzmovl with cvttpd2dq to remove extra moves.
Reviewers: delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26330
llvm-svn: 286344
Summary:
This is needed to make the v64i8 and v32i16 types legal for the 512-bit VBMI instructions. Fixes PR30912.
Reviewers: delena, zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26322
llvm-svn: 286339
Summary: For functions with profile data, we are confident that loop sink will be optimal in sinking code.
Reviewers: davidxl, hfinkel
Subscribers: mehdi_amini, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26155
llvm-svn: 286325
The smallest tests that expose this are codegen tests (because SelectionDAGBuilder::visitSelect() uses matchSelectPattern
to create UMAX/UMIN nodes), but it's also possible to see the effects in IR alone with folds of min/max pairs.
If these were written as unsigned compares in IR, InstCombine canonicalizes the unsigned compares to signed compares.
Ie, running the optimizer pessimizes the codegen for this case without this patch:
define <4 x i32> @umax_vec(<4 x i32> %x) {
%cmp = icmp ugt <4 x i32> %x, <i32 2147483647, i32 2147483647, i32 2147483647, i32 2147483647>
%sel = select <4 x i1> %cmp, <4 x i32> %x, <4 x i32> <i32 2147483647, i32 2147483647, i32 2147483647, i32 2147483647>
ret <4 x i32> %sel
}
$ ./opt umax.ll -S | ./llc -o - -mattr=avx
vpmaxud LCPI0_0(%rip), %xmm0, %xmm0
$ ./opt -instcombine umax.ll -S | ./llc -o - -mattr=avx
vpxor %xmm1, %xmm1, %xmm1
vpcmpgtd %xmm0, %xmm1, %xmm1
vmovaps LCPI0_0(%rip), %xmm2 ## xmm2 = [2147483647,2147483647,2147483647,2147483647]
vblendvps %xmm1, %xmm0, %xmm2, %xmm0
Differential Revision: https://reviews.llvm.org/D26096
llvm-svn: 286318
As the test change shows, we can increase the critical path by adding
a 'not' instruction, so make sure that we're actually removing an
instruction if we do this transform.
This transform could also cause us to miss folds of min/max pairs.
llvm-svn: 286315
if it is more specific than the one in its DW_AT_specification.
If a static member is an array, the translation unit containing the
member definition may have a more specific type (including its length)
than TUs only seeing the class declaration. This patch adds a
DW_AT_type to the member's DW_TAG_variable in addition to the
DW_AT_specification in these cases. The member type in the
DW_AT_specification still shows the more generic type (without the
length) to avoid defeating type uniquing.
The DWARF standard discourages “duplicating” a DW_AT_type in a member
variable definition but doesn’t explicitly forbid it. Having the more
specific type (with the array length) available is what allows the
debugger to print the contents of a static array member variable.
https://reviews.llvm.org/D26368
rdar://problem/28706946
llvm-svn: 286302
Summary:
This patch uses the same approach added for inline asm in r285513 to
similarly prevent promotion/renaming of locals used or defined in module
level asm.
All static global values defined in normal IR and used in module level asm
should be included on either the llvm.used or llvm.compiler.used global.
The former were already being flagged as NoRename in the summary, and
I've simply added llvm.compiler.used values to this handling.
Module level asm may also contain defs of values. We need to prevent
export of any refs to local values defined in module level asm (e.g. a
ref in normal IR), since that also requires renaming/promotion of the
local. To do that, the summary index builder looks at all values in the
module level asm string that are not marked Weak or Global, which is
exactly the set of locals that are defined. A summary is created for
each of these local defs and flagged as NoRename.
This required adding handling to the BitcodeWriter to look at GV
declarations to see if they have a summary (rather than skipping them
all).
Finally, added an assert to IRObjectFile::CollectAsmUndefinedRefs to
ensure that an MCAsmParser is available, otherwise the module asm parse
would silently fail. Initialized the asm parser in the opt tool for use
in testing this fix.
Fixes PR30610.
Reviewers: mehdi_amini
Subscribers: johanengelen, krasin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26146
llvm-svn: 286297
This addresses PR30746, <https://llvm.org/bugs/show_bug.cgi?id=30746>. The ASan pass iterates over entry-block instructions and checks each alloca whether it's in NonInstrumentedStaticAllocaVec, which is apparently slow. This patch gathers the instructions to move during visitAllocaInst.
Differential Revision: https://reviews.llvm.org/D26380
llvm-svn: 286296
Simon Pilgrim