When clang includes a PCH, it tolerates some amount of differences
between the defines used when creating and when including the PCH
- this seems to be intentionally allowed in
c379c07240 (and later extended in
b636875196).
When using a PCH (or when picking a PCH out of a directory containing
multiple candidates) Clang used to accept the header if there were
defines on the command line when creating the PCH that are missing
when using the PCH, or vice versa, defines only set when using the
PCH.
The only cases where Clang explicitly rejected the use of a PCH
is if there was an explicit conflict between the options, e.g.
-DFOO=1 vs -DFOO=2, or -DFOO vs -UFOO.
The latter commit added a FIXME that we really should check whether
mismatched defines actually were used somewhere in the PCH, so that
the define would affect the outcome. This FIXME has stood unaddressed
since 2012.
This differs from GCC, which rejects PCH files if the defines differ
at all.
When explicitly including a single PCH file, the relaxed policy
of allowing minor differences is harmless for correct use cases
(but may fail to diagnose mismtaches), and potentially allow using
PCHs in wider cases (where the user intentionally know that the
differences in defines are harmless for the PCH).
However, for GCC style PCH directories, with a directory containing
multiple PCH variants and the compiler should pick the correct match
out of them, Clang's relaxed logic was problematic. The directory
could contain two otherwise identical PCHs, but one built with -DFOO
and one without. When attempting to include a PCH and iterating over
the candidates in the directory, Clang would essentially pick the
first one out of the two, even if there existed a better, exact
match in the directory.
Keep the relaxed checking when specificlly including one named
PCH file, but require strict matches when trying to pick the right
candidate out of a GCC style directory with alternatives.
This fixes https://github.com/lhmouse/mcfgthread/issues/63.
Differential Revision: https://reviews.llvm.org/D126676
Use of `ORIGINAL_PCH_DIR` record has been superseeded by making PCH/PCM files with relocatable paths at write time.
Removing this record is useful for producing an output-path-independent PCH file and enable sharing of the same PCH file even
when it was intended for a different output path.
Differential Revision: https://reviews.llvm.org/D131124
This completes the implementation of P1091R3 and P1381R1.
This patch allow the capture of structured bindings
both for C++20+ and C++17, with extension/compat warning.
In addition, capturing an anonymous union member,
a bitfield, or a structured binding thereof now has a
better diagnostic.
We only support structured bindings - as opposed to other kinds
of structured statements/blocks. We still emit an error for those.
In addition, support for structured bindings capture is entirely disabled in
OpenMP mode as this needs more investigation - a specific diagnostic indicate the feature is not yet supported there.
Note that the rest of P1091R3 (static/thread_local structured bindings) was already implemented.
at the request of @shafik, i can confirm the correct behavior of lldb wit this change.
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/52720
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D122768
This completes the implementation of P1091R3 and P1381R1.
This patch allow the capture of structured bindings
both for C++20+ and C++17, with extension/compat warning.
In addition, capturing an anonymous union member,
a bitfield, or a structured binding thereof now has a
better diagnostic.
We only support structured bindings - as opposed to other kinds
of structured statements/blocks. We still emit an error for those.
In addition, support for structured bindings capture is entirely disabled in
OpenMP mode as this needs more investigation - a specific diagnostic indicate the feature is not yet supported there.
Note that the rest of P1091R3 (static/thread_local structured bindings) was already implemented.
at the request of @shafik, i can confirm the correct behavior of lldb wit this change.
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/52720
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D122768
This is useful to enable sharing of the same PCH file even when it's intended for a different output path.
The only information this option disables writing is for `ORIGINAL_PCH_DIR` record which is treated as optional and (when present) used as fallback for resolving input file paths relative to it.
Differential Revision: https://reviews.llvm.org/D130710
Currently, the use of preferred_name would block implementing std
modules in libcxx. See https://github.com/llvm/llvm-project/issues/56490
for example.
The problem is pretty hard and it looks like we couldn't solve it in a
short time. So we sent this patch as a workaround to avoid blocking us
to modularize STL. This is intended to be fixed properly in the future.
Reviewed By: erichkeane, aaron.ballman, tahonermann
Differential Revision: https://reviews.llvm.org/D130331
In cases where a non-template function is defined inside a function
template, we don't have information about the original uninstantiated
version. In the case of concepts instantiation, we will need the
ability to get back to the original template. This patch splits a piece
of the deferred concepts instantaition patch off to accomplish the
storage of this, with minor runtime overhead, and zero additional
storage.
Specifically, making the following changes:
* Turn lambdas calculating ODR hashes into static functions.
* Move `ODRCXXRecordDifference` where it is used.
* Rename some variables and move some lines of code.
* Replace `auto` with explicit type when the deduced type is not mentioned.
* Add `const` for unmodified objects, so we can pass them to more functions.
Differential Revision: https://reviews.llvm.org/D128690
It's more natural to use uint8_t * (std::byte needs C++17 and llvm has
too much uint8_t *) and most callers use uint8_t * instead of char *.
The functions are recently moved into `llvm::compression::zlib::`, so
downstream projects need to make adaption anyway.
The two first parameters of checkPreprocessorOptions are "PPOpts, ExistingPPOpts".
All other callers of the function pass them consistently.
This avoids confusion when working on the code.
Differential Revision: https://reviews.llvm.org/D129277
* Refactor compression namespaces across the project, making way for a possible
introduction of alternatives to zlib compression.
Changes are as follows:
* Relocate the `llvm::zlib` namespace to `llvm::compression::zlib`.
Reviewed By: MaskRay, leonardchan, phosek
Differential Revision: https://reviews.llvm.org/D128953
This is a recommit of b822efc740,
reverted in dc34d8df4c. The commit caused
fails because the test ast-print-fp-pragmas.c did not specify particular
target, and it failed on targets which do not support constrained
intrinsics. The original commit message is below.
AST does not have special nodes for pragmas. Instead a pragma modifies
some state variables of Sema, which in turn results in modified
attributes of AST nodes. This technique applies to floating point
operations as well. Every AST node that can depend on FP options keeps
current set of them.
This technique works well for options like exception behavior or fast
math options. They represent instructions to the compiler how to modify
code generation for the affected nodes. However treatment of FP control
modes has problems with this technique. Modifying FP control mode
(like rounding direction) usually requires operations on hardware, like
writing to control registers. It must be done prior to the first
operation that depends on the control mode. In particular, such
operations are required for implementation of `pragma STDC FENV_ROUND`,
compiler should set up necessary rounding direction at the beginning of
compound statement where the pragma occurs. As there is no representation
for pragmas in AST, the code generation becomes a complicated task in
this case.
To solve this issue FP options are kept inside CompoundStmt. Unlike to FP
options in expressions, these does not affect any operation on FP values,
but only inform the codegen about the FP options that act in the body of
the statement. As all pragmas that modify FP environment may occurs only
at the start of compound statement or at global level, such solution
works for all relevant pragmas. The options are kept as a difference
from the options in the enclosing compound statement or default options,
it helps codegen to set only changed control modes.
Differential Revision: https://reviews.llvm.org/D123952
This patch gives basic parsing and semantic support for
"parallel masked taskloop simd" construct introduced in
OpenMP 5.1 (section 2.16.10)
Differential Revision: https://reviews.llvm.org/D128946
This reverts commit d4d47e574e.
This fixes the lldb crash that was observed by ensuring that our
friend-'template contains reference to' TreeTransform properly handles a
TemplateDecl.
AST does not have special nodes for pragmas. Instead a pragma modifies
some state variables of Sema, which in turn results in modified
attributes of AST nodes. This technique applies to floating point
operations as well. Every AST node that can depend on FP options keeps
current set of them.
This technique works well for options like exception behavior or fast
math options. They represent instructions to the compiler how to modify
code generation for the affected nodes. However treatment of FP control
modes has problems with this technique. Modifying FP control mode
(like rounding direction) usually requires operations on hardware, like
writing to control registers. It must be done prior to the first
operation that depends on the control mode. In particular, such
operations are required for implementation of `pragma STDC FENV_ROUND`,
compiler should set up necessary rounding direction at the beginning of
compound statement where the pragma occurs. As there is no representation
for pragmas in AST, the code generation becomes a complicated task in
this case.
To solve this issue FP options are kept inside CompoundStmt. Unlike to FP
options in expressions, these does not affect any operation on FP values,
but only inform the codegen about the FP options that act in the body of
the statement. As all pragmas that modify FP environment may occurs only
at the start of compound statement or at global level, such solution
works for all relevant pragmas. The options are kept as a difference
from the options in the enclosing compound statement or default options,
it helps codegen to set only changed control modes.
Differential Revision: https://reviews.llvm.org/D123952
We'll need to add more cases for Objective-C entities and adding
everything to `err_module_odr_violation_mismatch_decl_diff` makes it
harder to work with over time.
Differential Revision: https://reviews.llvm.org/D128488
This patch gives basic parsing and semantic support for
"parallel masked taskloop" construct introduced in
OpenMP 5.1 (section 2.16.9)
Differential Revision: https://reviews.llvm.org/D128834
This reverts commit 2f20743952 because it
triggers an assertion when building an LLDB test program:
Assertion failed: (InstantiatingSpecializations.empty() && "failed to
clean up an InstantiatingTemplate?"), function ~Sema, file
/Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/clang/lib/Sema/Sema.cpp,
line 458.
More details in https://reviews.llvm.org/D126907.
It helps to avoid copy-paste mistakes and makes custom code paths more
noticeable.
Not funnelling all diagnostic through `ODRDiagDeclError` because plan to
break down `err_module_odr_violation_mismatch_decl_diff` into smaller
pieces instead of making it bigger and bigger.
Differential Revision: https://reviews.llvm.org/D128487
This patch gives basic parsing and semantic support for
"masked taskloop simd" construct introduced in OpenMP 5.1 (section 2.16.8)
Differential Revision: https://reviews.llvm.org/D128693
This patch gives basic parsing and semantic support for "masked taskloop"
construct introduced in OpenMP 5.1 (section 2.16.7)
Differential Revision: https://reviews.llvm.org/D128478
Currently we do not in general merge attributes when importing decls from modules. This patch handles availability, but long term we need to properly handle all attributes.
I tried to use Sema::mergeDeclAttributes, but it caused test crashes as I don't think it expects to be called in this context. We really shouldn't have duplicate code for merging attributes long term, but for now this fixes availability. There's already a TODO for this in the declaration of ASTDeclReader::mergeInheritableAttributes.
Differential Revision: https://reviews.llvm.org/D127182
rdar://85820301
This patch adds the codegen support for `atomic compare capture` in clang.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D120290
This is a support for " #pragma omp atomic compare fail ". It has Parser & AST support for now.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D123235
Adds support for the reserved locator 'omp_all_memory' for use
in depend clauses with 'out' or 'inout' dependence-types.
Differential Revision: https://reviews.llvm.org/D125828
Number of statements in CompoundStmt is kept in a bit-field of the common
part of Stmt. The field has 24 bits for the number. To allocate a new
bit field (as attempted in https://reviews.llvm.org/D123952), this
number must be reduced, maximal number of statements in a compound
statement becomes smaller. It can result in compilation errors of some
programs.
With this change the number of statements is kept in a field of type
'unsigned int' rather than in bit-field. To make room in CompoundStmtBitfields
LBraceLoc is moved to fields of CompoundStmt.
Differential Revision: https://reviews.llvm.org/D125635
This is a 1.9% reduction in PCH size in my measurements.
In abbreviated records, VBR6 seems to be slightl better than VBR8 for locations
that may be delta-encoded (i.e. not the first)
Differential Revision: https://reviews.llvm.org/D125952
Much of the size of PCH/PCM files comes from stored SourceLocations.
These are encoded using (almost) their raw value, VBR-encoded. Absolute
SourceLocations can be relatively large numbers, so this commonly takes
20-30 bits per location.
We can reduce this by exploiting redundancy: many "nearby" SourceLocations are
stored differing only slightly and can be delta-encoded.
Randam-access loading of AST nodes constrains how long these sequences
can be, but we can do it at least within a node that always gets
deserialized as an atomic unit.
TypeLoc is implemented in this patch as it's a relatively small change
that shows most of the API.
This saves ~3.5% of PCH size, I have local changes applying this technique
further that save another 3%, I think it's possible to get to 10% total.
Differential Revision: https://reviews.llvm.org/D125403
This diff changes the serialization of the `ORIGINAL_PCH_DIR`
entry in module files to be serialized relative to the module's
`BaseDirectory`. This will allow for the module to be relocatable
across machines.
The path is restored relative to the module's BaseDirectory on
deserialization.
Reviewed By: urnathan
Differential Revision: https://reviews.llvm.org/D124946
This diff changes the serialization of the `SUBMODULE_TOPHEADER`
entry in module files to be serialized relative to the module's
`BaseDirectory`. This matches the behavior of the
`SUBMODULE_HEADER` entry and will allow for the module to be
relocatable across machines.
The path is restored relative to the module's `BaseDirectory` on
deserialization.
Reviewed By: urnathan
Differential Revision: https://reviews.llvm.org/D124938
This diff adds a new frontend flag `-fmodule-file-home-is-cwd`.
The behavior of this flag is similar to
`-fmodule-map-file-home-is-cwd` but does not require the module
map files to be modified to have inputs relative to the cwd.
Instead the output modules will have their `BaseDirectory` set
to the cwd and will try and resolve paths relative to that.
The motiviation for this change is to support relocatable pcm
files that are built on different machines with different paths
without having to alter module map files, which is sometimes not
possible as they are provided by 3rd parties.
Reviewed By: urnathan
Differential Revision: https://reviews.llvm.org/D124874
Martin Storsjö