Kernel support for MTE has been released in Linux 5.10. This means
that it is a stable API and we no longer need to make the support
conditional on a macro. We do need to provide conditional definitions
of the new macros though in order to avoid a dependency on new
kernel headers.
Differential Revision: https://reviews.llvm.org/D93513
canAllocate() does not take into account the header size so it does
not return the right answer in borderline cases. There was already
code handling this correctly in isTaggedAllocation() so split it out
into a separate function and call it from the test.
Furthermore the test was incorrect when MTE is enabled because MTE
does not pattern fill primary allocations. Fix it.
Differential Revision: https://reviews.llvm.org/D93437
Initially we were avoiding the release of smaller size classes due to
the fact that it was an expensive operation, particularly on 32-bit
platforms. With a lot of batches, and given that there are a lot of
blocks per page, this was a lengthy operation with little results.
There has been some improvements since then to the 32-bit release,
and we still have some criterias preventing us from wasting time
(eg, 9x% free blocks in the class size, etc).
Allowing to release blocks < 128 bytes helps in situations where a lot
of small chunks would not have been reclaimed if not for a forced
reclaiming.
Additionally change some `CHECK` to `DCHECK` and rearrange a bit the
code.
I didn't experience any regressions in my benchmarks.
Differential Revision: https://reviews.llvm.org/D93141
Make these arguments named constants in the Config class instead
of being positional arguments to MapAllocatorCache. This makes the
configuration easier to follow.
Eventually we should follow suit with the other classes but this is
a start.
Differential Revision: https://reviews.llvm.org/D93251
There are a few things that I wanted to reorganize for a while:
- the loop that incrementally goes through classes on failure looked
horrible in assembly, mostly because of `LIKELY`/`UNLIKELY` within
the loop. So remove those, we are already in an unlikely scenario
- hooks are not used by default on Android/Fuchsia/etc so mark the
tests for the existence of the weak functions as unlikely
- mark of couple of conditions as likely/unlikely
- in `reallocate`, the old size was computed again while we already
have it in a variable. So just use the one we have.
- remove the bitwise AND trick and use a logical AND, that has one
less test by using a purposeful underflow when `Size` is 0 (I
actually looked at the assembly of the previous code to steal that
trick)
- move the read of the options closer to where they are used, mark them
as `const`
Overall this makes things a tiny bit faster, but cleaner.
Differential Revision: https://reviews.llvm.org/D92689
Normally compilers will allocate space for struct fields even if the
field is an empty struct. Use the [[no_unique_address]] attribute to
suppress that behavior. This attribute that was introduced in C++20,
but compilers that do not support [[no_unique_address]] will ignore
it since it uses C++11 attribute syntax.
Differential Revision: https://reviews.llvm.org/D92966
Quarantines have always been broken when MTE is enabled because the
quarantine batch allocator fails to reset tags that may have been
left behind by a user allocation.
This was only noticed when running the Scudo unit tests with Scudo
as the system allocator because quarantines are turned off by
default on Android and the test binary turns them on by defining
__scudo_default_options, which affects the system allocator as well.
Differential Revision: https://reviews.llvm.org/D92881
Separate the IRG part from the STZG part since we will need to use
the latter on its own for some upcoming changes.
Differential Revision: https://reviews.llvm.org/D92880
In ScopedString::append va_list ArgsCopy is created but never cleanuped
which can lead to undefined behaviour, like stack corruption.
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D92383
The original code to keep track of the minimum and maximum indices
of allocated 32-bit primary regions was sketchy at best.
`MinRegionIndex` & `MaxRegionIndex` were shared between all size
classes, and could (theoretically) have been updated concurrently. This
didn't materialize anywhere I could see, but still it's not proper.
This changes those min/max indices by making them class specific rather
than global: classes are locked when growing, so there is no
concurrency there. This also allows to simplify some of the 32-bit
release code, that now doesn't have to go through all the regions to
get the proper min/max. Iterate and unmap will no longer have access to
the global min/max, but they aren't used as much so this is fine.
Differential Revision: https://reviews.llvm.org/D91106
This unit test code was using malloc without a corresponding free.
When the system malloc is not being overridden by the code under
test, it might an asan/lsan allocator that notices leaks.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D91472
`populateFreelist` was more complicated that it needed to be. We used
to call to `populateBatches` that would do some internal shuffling and
add pointers one by one to the batches, but ultimately this was not
needed. We can get rid of `populateBatches`, and do processing in
bulk. This doesn't necessarily make things faster as this is not on the
hot path, but it makes the function cleaner.
Additionally clean up a couple of items, like `UNLIKELY`s and setting
`Exhausted` to `false` which can't happen.
Differential Revision: https://reviews.llvm.org/D90700
There is no need to memset released pages because they are already
zero. On db845c, before:
BM_stdlib_malloc_free_default/131072 34562 ns 34547 ns 20258 bytes_per_second=3.53345G/s
after:
BM_stdlib_malloc_free_default/131072 29618 ns 29589 ns 23485 bytes_per_second=4.12548G/s
Differential Revision: https://reviews.llvm.org/D90814
- we have clutter-reducing helpers for relaxed atomics that were barely
used, use them everywhere we can
- clang-format everything with a recent version
Differential Revision: https://reviews.llvm.org/D90649
Move some of the flags previously in Options, as well as the
UseMemoryTagging flag previously in the primary allocator, into an
atomic variable so that it can be updated while other threads are
running. Relaxed accesses are used because we only have the requirement
that the other threads see the new value eventually.
The code is set up so that the variable is generally loaded once per
allocation function call with the exception of some rarely used code
such as error handlers. The flag bits can generally stay in a register
during the execution of the allocation function which means that they
can be branched on with minimal overhead (e.g. TBZ on aarch64).
Differential Revision: https://reviews.llvm.org/D88523
Said test was flaking on Fuchsia for non-obvious reasons, and only
for ASan variants (the release was returning 0).
It turned out that the templating was off, `true` being promoted to
a `s32` and used as the minimum interval argument. This meant that in
some circumstances, the normal release would occur, and the forced
release would have nothing to release, hence the 0 byte released.
The symbols are giving it away (note the 1):
```
scudo::SizeClassAllocator64<scudo::FixedSizeClassMap<scudo::DefaultSizeClassConfig>,24ul,1,2147483647,false>::releaseToOS(void)
```
This also probably means that there was no MTE version of that test!
Differential Revision: https://reviews.llvm.org/D88457
`atomic_compare_exchange_weak` is unused in Scudo, and its associated
test is actually wrong since the weak variant is allowed to fail
spuriously (thanks Roland).
This lead to flakes such as:
```
[ RUN ] ScudoAtomicTest.AtomicCompareExchangeTest
../../zircon/third_party/scudo/src/tests/atomic_test.cpp:98: Failure: Expected atomic_compare_exchange_weak(reinterpret_cast<T *>(&V), &OldVal, NewVal, memory_order_relaxed) is true.
Expected: true
Which is: 01
Actual : atomic_compare_exchange_weak(reinterpret_cast<T *>(&V), &OldVal, NewVal, memory_order_relaxed)
Which is: 00
../../zircon/third_party/scudo/src/tests/atomic_test.cpp💯 Failure: Expected atomic_compare_exchange_weak( reinterpret_cast<T *>(&V), &OldVal, NewVal, memory_order_relaxed) is false.
Expected: false
Which is: 00
Actual : atomic_compare_exchange_weak( reinterpret_cast<T *>(&V), &OldVal, NewVal, memory_order_relaxed)
Which is: 01
../../zircon/third_party/scudo/src/tests/atomic_test.cpp:101: Failure: Expected OldVal == NewVal.
Expected: NewVal
Which is: 24
Actual : OldVal
Which is: 42
[ FAILED ] ScudoAtomicTest.AtomicCompareExchangeTest (0 ms)
[----------] 2 tests from ScudoAtomicTest (1 ms total)
```
So I am removing this, if someone ever needs the weak variant, feel
free to add it back with a test that is not as terrible. This test was
initially ported from sanitizer_common, but their weak version calls
the strong version, so it works for them.
Differential Revision: https://reviews.llvm.org/D88443
Move smaller and frequently-accessed fields near the beginning
of the data structure in order to improve locality and reduce
the number of instructions required to form an access to those
fields. With this change I measured a ~5% performance improvement on
BM_malloc_sql_trace_default on aarch64 Android devices (Pixel 4 and
DragonBoard 845c).
Differential Revision: https://reviews.llvm.org/D88350
Fix a potential UB in `appendSignedDecimal` (with -INT64_MIN) by making
it a special case.
Fix the terrible test cases for `isOwned`: I was pretty sloppy on those
and used some stack & static variables, but since `isOwned` accesses
memory prior to the pointer to check for the validity of the Scudo
header, it ended up being detected as some global and stack buffer out
of bounds accesses. So not I am using buffers with enough room so that
the test will not access memory prior to the variables.
With those fixes, the tests pass on the ASan+UBSan Fuchsia build.
Thanks to Roland for pointing those out!
Differential Revision: https://reviews.llvm.org/D88170
https://reviews.llvm.org/D87420 removed the uses of the pthread key,
but the key itself was left in the shared TSD registry. It is created
on registry initialization, and destroyed on registry teardown.
There is really no use for it now, so we can just remove it.
Differential Revision: https://reviews.llvm.org/D88046
1U has type unsigned int, and << of 32 or more is undefined behavior.
Use the proper type in the lhs of the shift.
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D87973
Here "memory initialization" refers to zero- or pattern-init on
non-MTE hardware, or (where possible to avoid) memory tagging on MTE
hardware. With shared TSD the per-thread memory initialization state
is stored in bit 0 of the TLS slot, similar to PointerIntPair in LLVM.
Differential Revision: https://reviews.llvm.org/D87739
An upcoming change to Scudo will change how we use the TLS slot
in tsd_shared.h, which will be a little easier to deal with if
we can remove the code path that calls pthread_getspecific and
pthread_setspecific. The only known user of this code path is Fuchsia.
We can't eliminate this code path by making Fuchsia use ELF TLS
because although Fuchsia supports ELF TLS, it is not supported within
libc itself. To address this, Roland McGrath on the Fuchsia team has
proposed that Scudo will optionally call a platform-provided function
to access a TLS slot reserved for Scudo. Android also has a reserved
TLS slot, but the code that accesses the TLS slot lives in Scudo.
We can eliminate some complexity and duplicated code by having Android
use the same mechanism that was proposed for Fuchsia, which is what
this change does. A separate change to Android implements it.
Differential Revision: https://reviews.llvm.org/D87420
I had left this as a TODO, but it turns out it wasn't complicated.
By specifying `MAP_RESIZABLE`, it allows us to keep the VMO which we
can then use for release purposes.
`releasePagesToOS` also had to be called the "proper" way, as Fuchsia
requires the `Offset` field to be correct. This has no impact on
non-Fuchsia platforms.
Differential Revision: https://reviews.llvm.org/D86800
With the 'new' way of releasing on 32-bit, we iterate through all the
regions in between `First` and `Last`, which covers regions that do not
belong to the class size we are working with. This is effectively wasted
cycles.
With this change, we add a `SkipRegion` lambda to `releaseFreeMemoryToOS`
that will allow the release function to know when to skip a region.
For the 64-bit primary, since we are only working with 1 region, we never
skip.
Reviewed By: hctim
Differential Revision: https://reviews.llvm.org/D86399
-fno-lto is in SANITIZER_COMMON_CFLAGS but not here.
Don't use SANITIZER_COMMON_CFLAGS because of performance issues.
See https://bugs.llvm.org/show_bug.cgi?id=46838.
Fixes
$ ninja TScudoCUnitTest-i386-Test
on an LLVM build with -DLLVM_ENABLE_LTO=Thin.
check-scudo now passes.
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D84805
This adds the code to support calling mallopt and converting the
options to the internal Option enum.
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D84806
Summary:
Partners have requested the ability to configure more parts of Scudo
at runtime, notably the Secondary cache options (maximum number of
blocks cached, maximum size) as well as the TSD registry options
(the maximum number of TSDs in use).
This CL adds a few more Scudo specific `mallopt` parameters that are
passed down to the various subcomponents of the Combined allocator.
- `M_CACHE_COUNT_MAX`: sets the maximum number of Secondary cached items
- `M_CACHE_SIZE_MAX`: sets the maximum size of a cacheable item in the Secondary
- `M_TSDS_COUNT_MAX`: sets the maximum number of TSDs that can be used (Shared Registry only)
Regarding the TSDs maximum count, this is a one way option, only
allowing to increase the count.
In order to allow for this, I rearranged the code to have some `setOption`
member function to the relevant classes, using the `scudo::Option` class
enum to determine what is to be set.
This also fixes an issue where a static variable (`Ready`) was used in
templated functions without being set back to `false` every time.
Reviewers: pcc, eugenis, hctim, cferris
Subscribers: jfb, llvm-commits, #sanitizers
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D84667
make_unique is a C++14 feature, and this prevents us from building on
Ubuntu Trusty. While we do use a C++14 compatible toolchain for building
in general, we fall back to the system toolchain for building the
compiler-rt tests.
The reason is that those tests get cross-compiled for e.g. 32-bit and
64-bit x86, and while the toolchain provides libstdc++ in those
flavours, the resulting compiler-rt test binaries don't get RPATH set
and so won't start if they're linked with that toolchain.
We've tried linking the test binaries against libstdc++ statically, by
passing COMPILER_RT_TEST_COMPILER_CFLAGS=-static-libstdc++. That mostly
works, but some test targets append -lstdc++ to the compiler invocation.
So, after spending way too much time on this, let's just avoid C++14
here for now.
Summary:
On 32-b, the release algo loops multiple times over the freelist for a size
class, which lead to a decrease in performance when there were a lot of free
blocks.
This changes the release functions to loop only once over the freelist, at the
cost of using a little bit more memory for the release process: instead of
working on one region at a time, we pass the whole memory area covered by all
the regions for a given size class, and work on sub-areas of `RegionSize` in
this large area. For 64-b, we just have 1 sub-area encompassing the whole
region. Of course, not all the sub-areas within that large memory area will
belong to the class id we are working on, but those will just be left untouched
(which will not add to the RSS during the release process).
Reviewers: pcc, cferris, hctim, eugenis
Subscribers: llvm-commits, #sanitizers
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D83993
This guarantees that we will detect a buffer overflow or underflow
that overwrites an adjacent block. This spatial guarantee is similar
to the temporal guarantee that we provide for immediate use-after-free.
Enabling odd/even tags involves a tradeoff between use-after-free
detection and buffer overflow detection. Odd/even tags make it more
likely for buffer overflows to be detected by increasing the size of
the guaranteed "red zone" around the allocation, but on the other
hand use-after-free is less likely to be detected because the tag
space for any particular chunk is cut in half. Therefore we introduce
a tuning setting to control whether odd/even tags are enabled.
Differential Revision: https://reviews.llvm.org/D84361
Note: Resubmission with frame pointers force-enabled to fix builds with
-DCOMPILER_RT_BUILD_BUILTINS=False
Summary:
Splits the unwinder into a non-segv (for allocation/deallocation traces) and a
segv unwinder. This ensures that implementations can select an accurate, slower
unwinder in the segv handler (if they choose to use the GWP-ASan provided one).
This is important as fast frame-pointer unwinders (like the sanitizer unwinder)
don't like unwinding through signal handlers.
Reviewers: morehouse, cryptoad
Reviewed By: morehouse, cryptoad
Subscribers: cryptoad, mgorny, eugenis, pcc, #sanitizers
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D83994
It was causing tests to fail in -DCOMPILER_RT_BUILD_BUILTINS=OFF builds:
GwpAsan-Unittest :: ./GwpAsan-x86_64-Test/BacktraceGuardedPoolAllocator.DoubleFree
GwpAsan-Unittest :: ./GwpAsan-x86_64-Test/BacktraceGuardedPoolAllocator.UseAfterFree
see comment on the code review.
> Summary:
> Splits the unwinder into a non-segv (for allocation/deallocation traces) and a
> segv unwinder. This ensures that implementations can select an accurate, slower
> unwinder in the segv handler (if they choose to use the GWP-ASan provided one).
> This is important as fast frame-pointer unwinders (like the sanitizer unwinder)
> don't like unwinding through signal handlers.
>
> Reviewers: morehouse, cryptoad
>
> Reviewed By: morehouse, cryptoad
>
> Subscribers: cryptoad, mgorny, eugenis, pcc, #sanitizers
>
> Tags: #sanitizers
>
> Differential Revision: https://reviews.llvm.org/D83994
This reverts commit 502f0cc0e3.
Summary:
Splits the unwinder into a non-segv (for allocation/deallocation traces) and a
segv unwinder. This ensures that implementations can select an accurate, slower
unwinder in the segv handler (if they choose to use the GWP-ASan provided one).
This is important as fast frame-pointer unwinders (like the sanitizer unwinder)
don't like unwinding through signal handlers.
Reviewers: morehouse, cryptoad
Reviewed By: morehouse, cryptoad
Subscribers: cryptoad, mgorny, eugenis, pcc, #sanitizers
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D83994
Summary:
Releasing smaller blocks is costly and only yields significant
results when there is a large percentage of free bytes for a given
size class (see numbers below).
This CL introduces a couple of additional checks for sizes lower
than 256. First we want to make sure that there is enough free bytes,
relatively to the amount of allocated bytes. We are looking at 8X% to
9X% (smaller blocks require higher percentage). We also want to make
sure there has been enough activity with the freelist to make it
worth the time, so we now check that the bytes pushed to the freelist
is at least 1/16th of the allocated bytes for those classes.
Additionally, we clear batches before destroying them now - this
could have prevented some releases to occur (class id 0 rarely
releases anyway).
Here are the numbers, for about 1M allocations in multiple threads:
Size: 16
85% freed -> 0% released
86% freed -> 0% released
87% freed -> 0% released
88% freed -> 0% released
89% freed -> 0% released
90% freed -> 0% released
91% freed -> 0% released
92% freed -> 0% released
93% freed -> 0% released
94% freed -> 0% released
95% freed -> 0% released
96% freed -> 0% released
97% freed -> 2% released
98% freed -> 7% released
99% freed -> 27% released
Size: 32
85% freed -> 0% released
86% freed -> 0% released
87% freed -> 0% released
88% freed -> 0% released
89% freed -> 0% released
90% freed -> 0% released
91% freed -> 0% released
92% freed -> 0% released
93% freed -> 0% released
94% freed -> 0% released
95% freed -> 1% released
96% freed -> 3% released
97% freed -> 7% released
98% freed -> 17% released
99% freed -> 41% released
Size: 48
85% freed -> 0% released
86% freed -> 0% released
87% freed -> 0% released
88% freed -> 0% released
89% freed -> 0% released
90% freed -> 0% released
91% freed -> 0% released
92% freed -> 0% released
93% freed -> 0% released
94% freed -> 1% released
95% freed -> 3% released
96% freed -> 7% released
97% freed -> 13% released
98% freed -> 27% released
99% freed -> 52% released
Size: 64
85% freed -> 0% released
86% freed -> 0% released
87% freed -> 0% released
88% freed -> 0% released
89% freed -> 0% released
90% freed -> 0% released
91% freed -> 0% released
92% freed -> 1% released
93% freed -> 2% released
94% freed -> 3% released
95% freed -> 6% released
96% freed -> 11% released
97% freed -> 20% released
98% freed -> 35% released
99% freed -> 59% released
Size: 80
85% freed -> 0% released
86% freed -> 0% released
87% freed -> 0% released
88% freed -> 0% released
89% freed -> 0% released
90% freed -> 1% released
91% freed -> 1% released
92% freed -> 2% released
93% freed -> 4% released
94% freed -> 6% released
95% freed -> 10% released
96% freed -> 17% released
97% freed -> 26% released
98% freed -> 41% released
99% freed -> 64% released
Size: 96
85% freed -> 0% released
86% freed -> 0% released
87% freed -> 0% released
88% freed -> 0% released
89% freed -> 1% released
90% freed -> 1% released
91% freed -> 3% released
92% freed -> 4% released
93% freed -> 6% released
94% freed -> 10% released
95% freed -> 14% released
96% freed -> 21% released
97% freed -> 31% released
98% freed -> 47% released
99% freed -> 68% released
Size: 112
85% freed -> 0% released
86% freed -> 1% released
87% freed -> 1% released
88% freed -> 2% released
89% freed -> 3% released
90% freed -> 4% released
91% freed -> 6% released
92% freed -> 8% released
93% freed -> 11% released
94% freed -> 16% released
95% freed -> 22% released
96% freed -> 30% released
97% freed -> 40% released
98% freed -> 55% released
99% freed -> 74% released
Size: 128
85% freed -> 0% released
86% freed -> 1% released
87% freed -> 1% released
88% freed -> 2% released
89% freed -> 3% released
90% freed -> 4% released
91% freed -> 6% released
92% freed -> 8% released
93% freed -> 11% released
94% freed -> 16% released
95% freed -> 22% released
96% freed -> 30% released
97% freed -> 40% released
98% freed -> 55% released
99% freed -> 74% released
Size: 144
85% freed -> 1% released
86% freed -> 2% released
87% freed -> 3% released
88% freed -> 4% released
89% freed -> 6% released
90% freed -> 7% released
91% freed -> 10% released
92% freed -> 13% released
93% freed -> 17% released
94% freed -> 22% released
95% freed -> 28% released
96% freed -> 37% released
97% freed -> 47% released
98% freed -> 61% released
99% freed -> 78% released
Size: 160
85% freed -> 1% released
86% freed -> 2% released
87% freed -> 3% released
88% freed -> 4% released
89% freed -> 5% released
90% freed -> 7% released
91% freed -> 10% released
92% freed -> 13% released
93% freed -> 17% released
94% freed -> 22% released
95% freed -> 28% released
96% freed -> 37% released
97% freed -> 47% released
98% freed -> 61% released
99% freed -> 78% released
Size: 176
85% freed -> 2% released
86% freed -> 3% released
87% freed -> 4% released
88% freed -> 6% released
89% freed -> 7% released
90% freed -> 9% released
91% freed -> 12% released
92% freed -> 15% released
93% freed -> 20% released
94% freed -> 25% released
95% freed -> 32% released
96% freed -> 40% released
97% freed -> 51% released
98% freed -> 64% released
99% freed -> 80% released
Size: 192
85% freed -> 4% released
86% freed -> 5% released
87% freed -> 6% released
88% freed -> 8% released
89% freed -> 10% released
90% freed -> 13% released
91% freed -> 16% released
92% freed -> 20% released
93% freed -> 24% released
94% freed -> 30% released
95% freed -> 37% released
96% freed -> 45% released
97% freed -> 55% released
98% freed -> 68% released
99% freed -> 82% released
Size: 224
85% freed -> 8% released
86% freed -> 10% released
87% freed -> 12% released
88% freed -> 14% released
89% freed -> 17% released
90% freed -> 20% released
91% freed -> 23% released
92% freed -> 28% released
93% freed -> 33% released
94% freed -> 39% released
95% freed -> 46% released
96% freed -> 53% released
97% freed -> 63% released
98% freed -> 73% released
99% freed -> 85% released
Size: 240
85% freed -> 8% released
86% freed -> 10% released
87% freed -> 12% released
88% freed -> 14% released
89% freed -> 17% released
90% freed -> 20% released
91% freed -> 23% released
92% freed -> 28% released
93% freed -> 33% released
94% freed -> 39% released
95% freed -> 46% released
96% freed -> 54% released
97% freed -> 63% released
98% freed -> 73% released
99% freed -> 85% released
Reviewers: cferris, pcc, hctim, eugenis
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D82031
Summary:
When enabling some malloc debug features on Android, multiple 32 bit
regions become exhausted, and the allocations fail. Allow allocations
to keep trying each bigger class in the Primary until it finds a fit.
In addition, some Android tests running on 32 bit fail sometimes due
to a running out of space in two regions, and then fail the allocation.
Reviewers: cryptoad
Reviewed By: cryptoad
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D82070
Summary:
Implement pattern initialization of memory (excluding the secondary
allocator because it already has predictable memory contents).
Expose both zero and pattern initialization through the C API.
Reviewers: pcc, cryptoad
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D79133
Summary:
If this is called before the malloc call in a thread (or in the whole
program), the lazy initialization of the allocation can overwrite
Options.
Reviewers: pcc, cryptoad
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D79130
Introduce a function __scudo_get_error_info() that may be called to interpret
a crash resulting from a memory error, potentially in another process,
given information extracted from the crashing process. The crash may be
interpreted as a use-after-free, buffer overflow or buffer underflow.
Also introduce a feature to optionally record a stack trace for each
allocation and deallocation. If this feature is enabled, a stack trace for
the allocation and (if applicable) the deallocation will also be available
via __scudo_get_error_info().
Differential Revision: https://reviews.llvm.org/D77283
Summary:
The function used to log on Android will cut the message past
a certain amount of characters, which mostly materializes when
dumping the size class map on OOM.
This change splits the log message at newline boundaries.
Reviewers: pcc, cferris, hctim, eugenis
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D78018
Summary:
Fuchsia's gcc uses this, which in turn prevents us to compile successfully
due to a few `memset`'ing some non-trivial classes in some `init`.
Change those `memset` to members initialization.
Reviewers: pcc, hctim
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D77902
For MTE error reporting we will need to expose interfaces for crash handlers
to use to interpret scudo headers and metadata. The intent is that these
interfaces will live in scudo/interface.h.
Move the existing interface.h into an include/scudo directory and make it
independent of the internal headers, so that we will be able to add the
interfaces there.
Differential Revision: https://reviews.llvm.org/D76648
Summary:
We introduced a way to fallback to the immediately larger size class for
the Primary in the event a region was full, but in the event of the largest
size class, we would just fail.
This change allows to fallback to the Secondary when the last region of
the Primary is full. We also expand the trick to all platforms as opposed
to being Android only, and update the test to cover the new case.
Reviewers: hctim, cferris, eugenis, morehouse, pcc
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D76430
Summary:
For the 32b primary, whenever we created a region, we would fill it
all at once (eg: create all the transfer batches for all the blocks
in that region). This wasn't ideal as all the potential blocks in
a newly created region might not be consummed right away, and it was
using extra memory (and release cycles) to keep all those free
blocks.
So now we keep track of the current region for a given class, and
how filled it is, carving out at most `MaxNumBatches` worth of
blocks at a time.
Additionally, lower `MaxNumBatches` on Android from 8 to 4. This
lowers the randomness of blocks, which isn't ideal for security, but
keeps things more clumped up for PSS/RSS accounting purposes.
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D75551
Summary:
This patch includes several changes to reduce the overall footprint
of the allocator:
- for realloc'd chunks: only keep the same chunk when lowering the size
if the delta is within a page worth of bytes;
- when draining a cache: drain the beginning, not the end; we add pointers
at the end, so that meant we were draining the most recently added
pointers;
- change the release code to account for an freed up last page: when
scanning the pages, we were looking for pages fully covered by blocks;
in the event of the last page, if it's only partially covered, we
wouldn't mark it as releasable - even what follows the last chunk is
all 0s. So now mark the rest of the page as releasable, and adapt the
test;
- add a missing `setReleaseToOsIntervalMs` to the cacheless secondary;
- adjust the Android classes based on more captures thanks to pcc@'s
tool.
Reviewers: pcc, cferris, hctim, eugenis
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D75142
Summary:
Most of our larger data is dynamically allocated (via `map`) but it
became an hindrance with regard to init time, for a cost to benefit
ratio that is not great. So change the `TSD`s, `RegionInfo`, `ByteMap`
to be static.
Additionally, for reclaiming, we used mapped & unmapped a buffer each
time, which is costly. It turns out that we can have a static buffer,
and that there isn't much contention on it.
One of the other things changed here, is that we hard set the number
of TSDs on Android to the maximum number, as there could be a
situation where cores are put to sleep and we could miss some.
Subscribers: mgorny, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D74696
Summary:
Add a method to set the release to OS value as the system runs,
and allow this to be set differently in the primary and the secondary.
Also, add a default value to use for primary and secondary. This
allows Android to have a default that is different for
primary/secondary.
Update mallopt to support setting the release to OS value.
Reviewers: pcc, cryptoad
Reviewed By: cryptoad
Subscribers: cryptoad, jfb, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D74448
Summary:
Due to Unity, we had to reduce our region sizes, but in some rare
situations, some programs (mostly tests AFAICT) manage to fill up
a region for a given size class.
So this adds a workaround for that attempts to allocate the block
from the immediately larger size class, wasting some memory but
allowing the application to keep going.
Reviewers: pcc, eugenis, cferris, hctim, morehouse
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D74567
Add an optional table lookup after the existing logarithm computation
for MidSize < Size <= MaxSize during size -> class lookups. The lookup is
O(1) due to indexing a precomputed (via constexpr) table based on a size
table. Switch to this approach for the Android size class maps.
Other approaches considered:
- Binary search was found to have an unacceptable (~30%) performance cost.
- An approach using NEON instructions (see older version of D73824) was found
to be slightly slower than this approach on newer SoCs but significantly
slower on older ones.
By selecting the values in the size tables to minimize wastage (for example,
by passing the malloc_info output of a target program to the included
compute_size_class_config program), we can increase the density of allocations
at a small (~0.5% on bionic malloc_sql_trace as measured using an identity
table) performance cost.
Reduces RSS on specific Android processes as follows (KB):
Before After
zygote (median of 50 runs) 26836 26792 (-0.2%)
zygote64 (median of 50 runs) 30384 30076 (-1.0%)
dex2oat (median of 3 runs) 375792 372952 (-0.8%)
I also measured the amount of whole-system idle dirty heap on Android by
rebooting the system and then running the following script repeatedly until
the results were stable:
for i in $(seq 1 50); do grep -A5 scudo: /proc/*/smaps | grep Pss: | cut -d: -f2 | awk '{s+=$1} END {print s}' ; sleep 1; done
I did this 3 times both before and after this change and the results were:
Before: 365650, 356795, 372663
After: 344521, 356328, 342589
These results are noisy so it is hard to make a definite conclusion, but
there does appear to be a significant effect.
On other platforms, increase the sizes of all size classes by a fixed offset
equal to the size of the allocation header. This has also been found to improve
density, since it is likely for allocation sizes to be a power of 2, which
would otherwise waste space by pushing the allocation into the next size class.
Differential Revision: https://reviews.llvm.org/D73824
This lets us remove two pointer indirections (one by removing the pointer,
and another by making the AllocatorPtr declaration hidden) in the C++ wrappers.
Differential Revision: https://reviews.llvm.org/D74356
Summary:
This tweaks some behaviors of the allocator wrt 32-bit, notably
tailoring the size-class map.
I had to remove a `printStats` from `__scudo_print_stats` since when
within Bionic they share the same slot so they can't coexist at the
same time. I have to find a solution for that later, but right now we
are not using the Svelte configuration.
Reviewers: rengolin
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D74178
The class is only used in SizeClassAllocator32 in 64-bit mode, but we don't
use that class in 64-bit mode.
Differential Revision: https://reviews.llvm.org/D74099
Summary:
Forewarning: This patch looks big in #LOC changed. I promise it's not that bad, it just moves a lot of content from one file to another. I've gone ahead and left inline comments on Phabricator for sections where this has happened.
This patch:
1. Introduces the crash handler API (crash_handler_api.h).
2. Moves information required for out-of-process crash handling into an AllocatorState. This is a trivially-copied POD struct that designed to be recovered from a deceased process, and used by the crash handler to create a GWP-ASan report (along with the other trivially-copied Metadata struct).
3. Implements the crash handler API using the AllocatorState and Metadata.
4. Adds tests for the crash handler.
5. Reimplements the (now optionally linked by the supporting allocator) in-process crash handler (i.e. the segv handler) using the new crash handler API.
6. Minor updates Scudo & Scudo Standalone to fix compatibility.
7. Changed capitalisation of errors (e.g. /s/Use after free/Use After Free).
Reviewers: cryptoad, eugenis, jfb
Reviewed By: eugenis
Subscribers: merge_guards_bot, pcc, jfb, dexonsmith, mgorny, cryptoad, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73557
Summary:
I tried to move the `madvise` calls outside of one of the secondary
mutexes, but this backfired. There is situation when a low release
interval is set combined with secondary pressure that leads to a race:
a thread can get a block from the cache, while another thread is
`madvise`'ing that block, resulting in a null header.
I changed the secondary race test so that this situation would be
triggered, and moved the release into the cache mutex scope.
Reviewers: cferris, pcc, eugenis, hctim, morehouse
Subscribers: jfb, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D74072
By subtracting 1 from Size at the beginning we can simplify the
subsequent calculations. This also saves 4 instructions on aarch64
and 9 instructions on x86_64, but seems to be perf neutral.
Differential Revision: https://reviews.llvm.org/D73936
As a result of recent changes to the Android size classes, the malloc_free_loop
benchmark started exhausting the 8192 size class at 32768 iterations. To avoid
this problem (and to make the test more realistic), change the benchmark to
use a variety of size classes.
Differential Revision: https://reviews.llvm.org/D73918
Summary:
This changes a couple of parameters in the default Android config to
address some performance and memory footprint issues (well to be closer
to the default Bionic allocator numbers).
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73750
Summary:
The Secondary's cache needs to be released when the Combined's
`releaseToOS` function is called (via `M_PURGE`) for example,
which this CL adds.
Additionally, if doing a forced release, we'll release the
transfer batch class as well since now we can do that.
There is a couple of other house keeping changes as well:
- read the page size only once in the Secondary Cache `store`
- remove the interval check for `CanRelease`: we are going to
make that configurable via `mallopt` so this needs not be
set in stone there.
Reviewers: cferris, hctim, pcc, eugenis
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73730
Summary:
A couple of seemingly innocuous changes ended up having a large impact
on the 32-bit performance. I still have to make those configurable at
some point, but right now it will have to do.
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73658
Summary:
Zygote & children's stderr is lost, so use Bionic's provided allocation
free syslog function for `outputRaw`. Get rid of the mutex as it's not
vital and could cause issues with `fork`.
Reviewers: cferris, pcc, eugenis, hctim, morehouse
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73561
Summary:
This CL changes multiple things to improve performance (notably on
Android).We introduce a cache class for the Secondary that is taking
care of this mechanism now.
The changes:
- change the Secondary "freelist" to an array. By keeping free secondary
blocks linked together through their headers, we were keeping a page
per block, which isn't great. Also we know touch less pages when
walking the new "freelist".
- fix an issue with the freelist getting full: if the pattern is an ever
increasing size malloc then free, the freelist would fill up and
entries would not be used. So now we empty the list if we get to many
"full" events;
- use the global release to os interval option for the secondary: it
was too costly to release all the time, particularly for pattern that
are malloc(X)/free(X)/malloc(X). Now the release will only occur
after the selected interval, when going through the deallocate path;
- allow release of the `BatchClassId` class: it is releasable, we just
have to make sure we don't mark the batches containing batches
pointers as free.
- change the default release interval to 1s for Android to match the
current Bionic allocator configuration. A patch is coming up to allow
changing it through `mallopt`.
- lower the smallest class that can be released to `PageSize/64`.
Reviewers: cferris, pcc, eugenis, morehouse, hctim
Subscribers: phosek, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73507
Summary:
This is an Android-specific interface for iterating over all live
allocations in a memory range.
Reviewers: hctim, cferris
Subscribers: mgorny, mgrang, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73305
Summary:
* Implement enable() and disable() in GWP-ASan.
* Setup atfork handler.
* Improve test harness sanity and re-enable GWP-ASan in Scudo.
Scudo_standalone disables embedded GWP-ASan as necessary around fork().
Standalone GWP-ASan sets the atfork handler in init() if asked to. This
requires a working malloc(), therefore GWP-ASan initialization in Scudo
is delayed to the post-init callback.
Test harness changes are about setting up a single global instance of
the GWP-ASan allocator so that pthread_atfork() does not create
dangling pointers.
Test case shamelessly stolen from D72470.
Reviewers: cryptoad, hctim, jfb
Subscribers: mgorny, jfb, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73294
Summary:
Unity is making irresponsible assumptions as to how clumped up memory
should be. With larger regions, we break those, resulting in errors
like:
"Using memoryadresses from more that 16GB of memory"
This is unfortunately one of those situations where we have to bend to
existing code because we doubt it's going to change any time soon.
128MB should be enough, but we could be flirting with OOMs in the
higher class sizes.
Reviewers: cferris, eugenis, hctim, morehouse, pcc
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73143
Summary:
In some configuration, `sched_getaffinity` can fail. Some reasons for
that being the lack of `CAP_SYS_NICE` capability or some syscall
filtering and so on.
This should not be fatal to the allocator, so in this situation, we
will fallback to the `MaxTSDCount` value specified in the allocator
configuration.
Reviewers: cferris, eugenis, hctim, morehouse, pcc
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D73055
When the hardware and operating system support the ARM Memory Tagging
Extension, tag primary allocation granules with a random tag. The granules
either side of the allocation are tagged with tag 0, which is normally
excluded from the set of tags that may be selected randomly. Memory is
also retagged with a random tag when it is freed, and we opportunistically
reuse the new tag when the block is reused to reduce overhead. This causes
linear buffer overflows to be caught deterministically and non-linear buffer
overflows and use-after-free to be caught probabilistically.
This feature is currently only enabled for the Android allocator
and depends on an experimental Linux kernel branch available here:
https://github.com/pcc/linux/tree/android-experimental-mte
All code that depends on the kernel branch is hidden behind a macro,
ANDROID_EXPERIMENTAL_MTE. This is the same macro that is used by the Android
platform and may only be defined in non-production configurations. When the
userspace interface is finalized the code will be updated to use the stable
interface and all #ifdef ANDROID_EXPERIMENTAL_MTE will be removed.
Differential Revision: https://reviews.llvm.org/D70762
Summary:
fork() wasn't well (or at all) supported in Scudo. This materialized
in deadlocks in children.
In order to properly support fork, we will lock the allocator pre-fork
and unlock it post-fork in parent and child. This is done via a
`pthread_atfork` call installing the necessary handlers.
A couple of things suck here: this function allocates - so this has to
be done post initialization as our init path is not reentrance, and it
doesn't allow for an extra pointer - so we can't pass the allocator we
are currently working with.
In order to work around this, I added a post-init template parameter
that gets executed once the allocator is initialized for the current
thread. Its job for the C wrappers is to install the atfork handlers.
I reorganized a bit the impacted area and added some tests, courtesy
of cferris@ that were deadlocking prior to this fix.
Subscribers: jfb, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D72470
Summary:
Some Android builds that we are interested in define `__BIONIC__`
but not `__ANDROID__`, so expand `SCUDO_ANDROID` to encompass those.
Reviewers: cferris, hctim, pcc, eugenis, morehouse
Subscribers: krytarowski, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D71772
Summary:
In order to implement `malloc_{enable|disable}` we were just disabling
(or really locking) the Primary and the Secondary. That meant that
allocations could still be serviced from the TSD as long as the cache
wouldn't have to be filled from the Primary.
This wasn't working out for Android tests, so this change implements
registry disabling (eg: locking) so that `getTSDAndLock` doesn't
return a TSD if the allocator is disabled. This also means that the
Primary doesn't have to be disabled in this situation.
For the Shared Registry, we loop through all the TSDs and lock them.
For the Exclusive Registry, we add a `Disabled` boolean to the Registry
that forces `getTSDAndLock` to use the Fallback TSD instead of the
thread local one. Disabling the Registry is then done by locking the
Fallback TSD and setting the boolean in question (I don't think this
needed an atomic variable but I might be wrong).
I clang-formatted the whole thing as usual hence the couple of extra
whiteline changes in this CL.
Reviewers: cferris, pcc, hctim, morehouse, eugenis
Subscribers: jfb, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D71719
Turns out that gtest in LLVM is only 1.8.0 (the newest version 1.10.0)
supports the GTEST_SKIP() macro, and apparently I didn't build w/o
GWP-ASan.
Should fix the GN bot, as well as any bots that may spuriously break on
platforms where the code wasn't correctly ifdef'd out as well.
Summary:
Adds GWP-ASan to Scudo standalone. Default parameters are pulled across from the
GWP-ASan build. No backtrace support as of yet.
Reviewers: cryptoad, eugenis, pcc
Reviewed By: cryptoad
Subscribers: merge_guards_bot, mgorny, #sanitizers, llvm-commits, cferris, vlad.tsyrklevich, pcc
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D71229
Instead of testing whether the pointer is aligned, just align it
unconditionally and compare it to the original pointer.
This moves the computation of UserPtr up to before we start preparing the
header, so that the memory tagging code will be able to read the original
header containing the bounds of the previous allocation before it gets
potentially clobbered by the pointer realignment code.
Differential Revision: https://reviews.llvm.org/D71292
With tag-on-free we will need to get the chunk of a deallocated block. Change
getChunkFromBlock() so that it doesn't check that the chunk is allocated,
and move the check into the caller, so that it can be reused for this purpose.
Differential Revision: https://reviews.llvm.org/D71291
Summary:
The function was only defined for x86 and arm families, which ends
up being an issue for PPC in g3.
Define the function, simply returning `false` for "other"
architectures.
Reviewers: hctim, pcc, cferris, eugenis, vitalybuka
Subscribers: kristof.beyls, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D71223
The test ScudoWrappersCTest.Realloc expects realloc of memalign to work on
Android, but this relies on dealloc_type_mismatch being set to false. Commit
0d3d4d3b0 caused us to start setting it to true in the C wrapper tests,
which broke the test. Set it to the correct value on Android.
Differential Revision: https://reviews.llvm.org/D71078
The Android headers don't provide a declaration of valloc or pvalloc, so we
need to declare them ourselves.
Differential Revision: https://reviews.llvm.org/D71077
Summary:
In order to be compliant with tcmalloc's extension ownership
determination function, we have to expose a function that will
say if a chunk was allocated by us.
As to whether or not this has security consequences: someone
able to call this function repeatedly could use it to determine
secrets (cookie) or craft a valid header. So this should not be
exposed directly to untrusted user input.
Add related tests.
Additionally clang-format caught a few things to change.
Reviewers: hctim, pcc, cferris, eugenis, vitalybuka
Subscribers: JDevlieghere, jfb, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D70908
This test was previously effectively doing:
P = malloc(X); write X bytes to P; P = realloc(P, X - Y); P = realloc(P, X)
and expecting that all X bytes stored to P would still be identical after
the final realloc.
This happens to be true for the current scudo implementation of realloc,
but is not guaranteed to be true by the C standard ("Any bytes in the new
object beyond the size of the old object have indeterminate values.").
This implementation detail will change with the new memory tagging support,
which unconditionally zeros newly allocated granules when memory tagging
is enabled. Fix this by limiting the number of bytes that we test to the
minimum size that we realloc the allocation to.
Differential Revision: https://reviews.llvm.org/D70761
The macros INLINE and COMPILER_CHECK always expand to the same thing (inline
and static_assert respectively). Both expansions are standards compliant C++
and are used consistently in the rest of LLVM, so let's improve consistency
with the rest of LLVM by replacing them with the expansions.
Differential Revision: https://reviews.llvm.org/D70793
Otherwise, we will hit a use-after-free when testing multiple instances of
the same allocator on the same thread. This only recently became a problem
with D70552 which caused us to run both ScudoCombinedTest.BasicCombined and
ScudoCombinedTest.ReleaseToOS on the unit tests' main thread.
Differential Revision: https://reviews.llvm.org/D70760
Summary:
This CL makes unit tests compatible with Fuchsia's zxtest. This
required a few changes here and there, but also unearthed some
incompatibilities that had to be addressed.
A header is introduced to allow to account for the zxtest/gtest
differences, some `#if SCUDO_FUCHSIA` are used to disable incompatible
code (the 32-bit primary, or the exclusive TSD).
It also brought to my attention that I was using
`__scudo_default_options` in different tests, which ended up in a
single binary, and I am not sure how that ever worked. So move
this to the main cpp.
Additionally fully disable the secondary freelist on Fuchsia as we do
not track VMOs for secondary allocations, so no release possible.
With some modifications to Scudo's BUILD.gn in Fuchsia:
```
[==========] 79 tests from 23 test cases ran (10280 ms total).
[ PASSED ] 79 tests
```
Reviewers: mcgrathr, phosek, hctim, pcc, eugenis, cferris
Subscribers: srhines, jfb, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D70682
Summary:
cferris@ found an issue where calling `releaseToOS` prior to any other
heap operation would lead to a crash, due to the allocator not being
properly initialized (it was discovered via `mallopt`).
The fix is to call `initThreadMaybe` prior to calling `releaseToOS` for
the Primary.
Add a test that crashes prior to fix.
Reviewers: hctim, cferris, pcc, eugenis
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D70552
Summary:
A few small improvements and optimizations:
- when refilling the free list, push back the last batch and return
the front one: this allows to keep the allocations towards the front
of the region;
- instead of using 48 entries in the shuffle array, use a multiple of
`MaxNumCached`;
- make the maximum number of batches to create on refil a constant;
ultimately it should be configurable, but that's for later;
- `initCache` doesn't need to zero out the cache, it's already done.
- it turns out that when using `||` or `&&`, the compiler is adamant
on adding a short circuit for every part of the expression. Which
ends up making somewhat annoying asm with lots of test and
conditional jump. I am changing that to bitwise `|` or `&` in two
place so that the generated code looks better. Added comments since
it might feel weird to people.
This yields to some small performance gains overall, nothing drastic
though.
Reviewers: hctim, morehouse, cferris, eugenis
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D70452
When we're not building libc's allocator, just use a regular TLS variable. This
lets the unit tests pass on Android devices whose libc uses Scudo. Otherwise
libc's copy of Scudo and the unit tests' copy will both try to use the same
TLS slot, in likely incompatible ways.
This requires using ELF TLS, so start passing -fno-emulated-tls when building
the library and the unit tests on Android.
Differential Revision: https://reviews.llvm.org/D70472
Summary:
`SCUDO_DEBUG` was not enabled for unit tests, meaning the `DCHECK`s
were never tripped. While turning this on, I discovered that a few
of those not-exercised checks were actually wrong. This CL addresses
those incorrect checks.
Not that to work in tests `CHECK_IMPL` has to explicitely use the
`scudo` namespace. Also changes a C cast to a C++ cast.
Reviewers: hctim, pcc, cferris, eugenis, vitalybuka
Subscribers: mgorny, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D70276
Summary: Bionic was modified to have all function names consistent. Modify the code and get rid of the special case for bionic since it's no longer needed.
Reviewers: cryptoad
Reviewed By: cryptoad
Subscribers: srhines, llvm-commits, #sanitizers
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D70031
Summary:
cferris@ found an issue due to the new Secondary free list behavior
and unfortunately it's completely my fault. The issue is twofold:
- I lost track of the (major) fact that the Combined assumes that
all chunks returned by the Secondary are zero'd out apprioriately
when dealing with `ZeroContents`. With the introduction of the
freelist, it's no longer the case as there can be a small portion
of memory between the header and the next page boundary that is
left untouched (the rest is zero'd via release). So the next time
that block is returned, it's not fully zero'd out.
- There was no test that would exercise that behavior :(
There are several ways to fix this, the one I chose makes the most
sense to me: we pass `ZeroContents` to the Secondary's `allocate`
and it zero's out the block if requested and it's coming from the
freelist. The prevents an extraneous `memset` in case the block
comes from `map`. Another possbility could have been to `memset`
in `deallocate`, but it's probably overzealous as all secondary
blocks don't need to be zero'd out.
Add a test that would have found the issue prior to fix.
Reviewers: morehouse, hctim, cferris, pcc, eugenis, vitalybuka
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69675
Summary:
The secondary allocator is slow, because we map and unmap each block
on allocation and deallocation.
While I really like the security benefits of such a behavior, this
yields very disappointing performance numbers on Android for larger
allocation benchmarks.
So this change adds a free list to the secondary, that will hold
recently deallocated chunks, and (currently) release the extraneous
memory. This allows to save on some memory mapping operations on
allocation and deallocation. I do not think that this lowers the
security of the secondary, but can increase the memory footprint a
little bit (RSS & VA).
The maximum number of blocks the free list can hold is templatable,
`0U` meaning that we fallback to the old behavior. The higher that
number, the higher the extra memory footprint.
I added default configurations for all our platforms, but they are
likely to change in the near future based on needs and feedback.
Reviewers: hctim, morehouse, cferris, pcc, eugenis, vitalybuka
Subscribers: mgorny, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69570
Summary:
Apparently during the review of D69265, and my flailing around with
git, a somewhat important line disappeared.
On top of that, there was no test exercising that code path, and
while writing the follow up patch I intended to write, some `CHECK`s
were failing.
Re-add the missing line, and add a test that fails without said line.
Reviewers: hctim, morehouse, pcc, cferris
Reviewed By: hctim
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69529
Summary:
This is a clean patch using the last diff of D69265, but using git
instead of svn, since svn went ro and arc was making my life harded
than it needed to be.
I was going to introduce a couple more lists and realized that our
lists are currently a bit all over the place. While we have a singly
linked list type relatively well defined, we are using doubly linked
lists defined on the fly for the stats and for the secondary blocks.
This CL adds a doubly linked list object, reorganizing the singly list
one to extract as much of the common code as possible. We use this
new type in the stats and the secondary. We also reorganize the list
tests to benefit from this consolidation.
There are a few side effect changes such as using for iterator loops
that are, in my opinion, cleaner in a couple of places.
Reviewers: hctim, morehouse, pcc, cferris
Reviewed By: hctim
Subscribers: jfb, #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69516
Android now allocates only 8 fixed TLS slots. Somehow we were getting away
with using a non-existent slot until now, but in some cases the TLS slots
were being placed at the end of a page, which led to a segfault at startup.
Differential Revision: https://reviews.llvm.org/D69191
llvm-svn: 375276
Summary:
Following up on D68471, this CL introduces some `getStats` APIs to
gather statistics in char buffers (`ScopedString` really) instead of
printing them out right away. Ultimately `printStats` will just
output the buffer, but that allows us to potentially do some work
on the intermediate buffer, and can be used for a `mallocz` type
of functionality. This allows us to pretty much get rid of all the
`Printf` calls around, but I am keeping the function in for
debugging purposes.
This changes the existing tests to use the new APIs when required.
I will add new tests as suggested in D68471 in another CL.
Reviewers: morehouse, hctim, vitalybuka, eugenis, cferris
Reviewed By: morehouse
Subscribers: delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D68653
llvm-svn: 374173
Summary:
There was an issue in `releaseToOSMaybe`: one of the criteria to
decide if we should proceed with the release was wrong. Namely:
```
const uptr N = Sci->Stats.PoppedBlocks - Sci->Stats.PushedBlocks;
if (N * BlockSize < PageSize)
return; // No chance to release anything.
```
I meant to check if the amount of bytes in the free list was lower
than a page, but this actually checks if the amount of **in use** bytes
was lower than a page.
The correct code is:
```
const uptr BytesInFreeList =
Region->AllocatedUser -
(Region->Stats.PoppedBlocks - Region->Stats.PushedBlocks) * BlockSize;
if (BytesInFreeList < PageSize)
return 0; // No chance to release anything.
```
Consequences of the bug:
- if a class size has less than a page worth of in-use bytes (allocated
or in a cache), reclaiming would not occur, whatever the amount of
blocks in the free list; in real world scenarios this is unlikely to
happen and be impactful;
- if a class size had less than a page worth of free bytes (and enough
in-use bytes, etc), then reclaiming would be attempted, with likely
no result. This means the reclaiming was overzealous at times.
I didn't have a good way to test for this, so I changed the prototype
of the function to return the number of bytes released, allowing to
get the information needed. The test added fails with the initial
criteria.
Another issue is that `ReleaseToOsInterval` can actually be 0, meaning
we always try to release (side note: it's terrible for performances).
so change a `> 0` check to `>= 0`.
Additionally, decrease the `CanRelease` threshold to `PageSize / 32`.
I still have to make that configurable but I will do it at another time.
Finally, rename some variables in `printStats`: I feel like "available"
was too ambiguous, so change it to "total".
Reviewers: morehouse, hctim, eugenis, vitalybuka, cferris
Reviewed By: morehouse
Subscribers: delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D68471
llvm-svn: 373930
Summary:
Initially, our malloc_info was returning ENOTSUP, but Android would
rather have it return successfully and write a barebone XML to the
stream, so we will oblige.
Add an associated test.
Reviewers: cferris, morehouse, hctim, eugenis, vitalybuka
Reviewed By: morehouse
Subscribers: delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D68427
llvm-svn: 373754
Summary:
This changes a few things to improve memory footprint and performances
on Android, and fixes a test compilation error:
- add `stdlib.h` to `wrappers_c_test.cc` to address
https://bugs.llvm.org/show_bug.cgi?id=42810
- change Android size class maps, based on benchmarks, to improve
performances and lower the Svelte memory footprint. Also change the
32-bit region size for said configuration
- change the `reallocate` logic to reallocate in place for sizes larger
than the original chunk size, when they still fit in the same block.
This addresses patterns from `memory_replay` dumps like the following:
```
202: realloc 0xb48fd000 0xb4930650 12352
202: realloc 0xb48fd000 0xb48fd000 12420
202: realloc 0xb48fd000 0xb48fd000 12492
202: realloc 0xb48fd000 0xb48fd000 12564
202: realloc 0xb48fd000 0xb48fd000 12636
202: realloc 0xb48fd000 0xb48fd000 12708
202: realloc 0xb48fd000 0xb48fd000 12780
202: realloc 0xb48fd000 0xb48fd000 12852
202: realloc 0xb48fd000 0xb48fd000 12924
202: realloc 0xb48fd000 0xb48fd000 12996
202: realloc 0xb48fd000 0xb48fd000 13068
202: realloc 0xb48fd000 0xb48fd000 13140
202: realloc 0xb48fd000 0xb48fd000 13212
202: realloc 0xb48fd000 0xb48fd000 13284
202: realloc 0xb48fd000 0xb48fd000 13356
202: realloc 0xb48fd000 0xb48fd000 13428
202: realloc 0xb48fd000 0xb48fd000 13500
202: realloc 0xb48fd000 0xb48fd000 13572
202: realloc 0xb48fd000 0xb48fd000 13644
202: realloc 0xb48fd000 0xb48fd000 13716
202: realloc 0xb48fd000 0xb48fd000 13788
...
```
In this situation we were deallocating the old chunk, and
allocating a new one for every single one of those, but now we can
keep the same chunk (we just updated the header), which saves some
heap operations.
Reviewers: hctim, morehouse, vitalybuka, eugenis, cferris, rengolin
Reviewed By: morehouse
Subscribers: srhines, delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D67293
llvm-svn: 371628
Summary:
cferris's Bionic tests found an issue in Scudo's `malloc_iterate`.
We were inclusive of both boundaries, which resulted in a `Block` that
was located on said boundary to be possibly accounted for twice, or
just being accounted for while iterating on regions that are not ours
(usually the unmapped ones in between Primary regions).
The fix is to exclude the upper boundary in `iterateOverChunks`, and
add a regression test.
This additionally corrects a typo in a comment, and change the 64-bit
Primary iteration function to not assume that `BatchClassId` is 0.
Reviewers: cferris, morehouse, hctim, vitalybuka, eugenis
Reviewed By: hctim
Subscribers: delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D66231
llvm-svn: 369400
Summary:
Android requires additional stats in mallinfo. While we can provide
right away the number of bytes mapped (Primary+Secondary), there was
no way to get the number of free bytes (only makes sense for the
Primary since the Secondary unmaps everything on deallocation).
An approximation could be `StatMapped - StatAllocated`, but since we
are mapping in `1<<17` increments for the 64-bit Primary, it's fairly
inaccurate.
So we introduce `StatFree` (note it's `Free`, not `Freed`!), which
keeps track of the amount of Primary blocks currently unallocated.
Reviewers: cferris, eugenis, vitalybuka, hctim, morehouse
Reviewed By: morehouse
Subscribers: delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D66112
llvm-svn: 368866
Summary:
Few corrections with no functional change:
- replacing `%zd` with `%zu` all around: the values are unsigned
- prefer `MAP_ANONYMOUS` to `MAP_ANON` (it's deprecated)
- remove the unused `enum LinkerInitialized`
- mark a parameter as `UNUSED` in Fuchsia's `getRandom`
- correct the casing of a variable and use `nullptr` instead of 0 for
pointers in `list.h`
- reorder some `typedef` to be consistent between `signed` and
`unsigned`
Reviewers: eugenis, vitalybuka, morehouse, hctim
Reviewed By: vitalybuka, morehouse
Subscribers: delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D65660
llvm-svn: 368585
Summary:
This introduces a bunch of small optimizations with the purpose of
making the fastpath tighter:
- tag more conditions as `LIKELY`/`UNLIKELY`: as a rule of thumb we
consider that every operation related to the secondary is unlikely
- attempt to reduce the number of potentially extraneous instructions
- reorganize the `Chunk` header to not straddle a word boundary and
use more appropriate types
Note that some `LIKELY`/`UNLIKELY` impact might be less obvious as
they are in slow paths (for example in `secondary.cc`), but at this
point I am throwing a pretty wide net, and it's consistant and doesn't
hurt.
This was mosly done for the benfit of Android, but other platforms
benefit from it too. An aarch64 Android benchmark gives:
- before:
```
BM_youtube/min_time:15.000/repeats:4/manual_time_mean 445244 us 659385 us 4
BM_youtube/min_time:15.000/repeats:4/manual_time_median 445007 us 658970 us 4
BM_youtube/min_time:15.000/repeats:4/manual_time_stddev 885 us 1332 us 4
```
- after:
```
BM_youtube/min_time:15.000/repeats:4/manual_time_mean 415697 us 621925 us 4
BM_youtube/min_time:15.000/repeats:4/manual_time_median 415913 us 622061 us 4
BM_youtube/min_time:15.000/repeats:4/manual_time_stddev 990 us 1163 us 4
```
Additional since `-Werror=conversion` is enabled on some platforms we
are built on, enable it upstream to catch things early: a few sign
conversions had slept through and needed additional casting.
Reviewers: hctim, morehouse, eugenis, vitalybuka
Reviewed By: vitalybuka
Subscribers: srhines, mgorny, javed.absar, kristof.beyls, delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D64664
llvm-svn: 366918
Summary:
A few corrections:
- rename `TransferBatch::MaxCached` to `getMaxCached` to conform with
the style guide;
- move `getBlockBegin` from `Chunk::` to `Allocator::`: I believe it
was a fallacy to have this be a `Chunk` method, as chunks'
relationship to backend blocks are up to the frontend allocator. It
makes more sense now, particularly with regard to the offset. Update
the associated chunk test as the method isn't available there
anymore;
- add a forgotten `\n` to a log string;
- for `releaseToOs`, instead of starting at `1`, start at `0` and
`continue` on `BatchClassId`: in the end it's identical but doesn't
assume a particular class id for batches;
- change a `CHECK` to a `reportOutOfMemory`: it's a clearer message
Reviewers: hctim, morehouse, eugenis, vitalybuka
Reviewed By: hctim
Subscribers: delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D64570
llvm-svn: 365816
Summary:
We ran into a problem on Fuchsia where yielding threads would never
be deboosted, ultimately resulting in several threads spinning on the
same TSD, and no possibility for another thread to be scheduled,
dead-locking the process.
While this was fixed in Zircon, this lead to discussions about if
spinning without a break condition was a good decision, and settled on
a new hybrid model that would spin for a while then block.
Currently we are using a number of iterations for spinning that is
mostly arbitrary (based on sanitizer_common values), but this can
be tuned in the future.
Since we are touching `common.h`, we also use this change as a vehicle
for an Android optimization (the page size is fixed in Bionic, so use
a fixed value too).
Reviewers: morehouse, hctim, eugenis, dvyukov, vitalybuka
Reviewed By: hctim
Subscribers: srhines, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D64358
llvm-svn: 365790
Summary:
Some clang versions (< 6.0) do not inline the atomic builtin functions
leaving unresolved references to `__atomic_load_8` and so on (seems to
be mostly 64-bit atomics on 32-bit platforms).
I tried without success to use some cmake magic to detect when that
would be the case, and decided to fall back to unconditionally
linking libatomic.
Reviewers: morehouse, eugenis, vitalybuka, hctim, tejohnson
Reviewed By: tejohnson
Subscribers: mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D64134
llvm-svn: 365052
Summary:
In some setups, using `-fsized-deallocation` would end up not finding
a sized delete operator at link time. For now, avoid using the flag
and declare the sized delete operator in the cpp test only.
This is a tentative fix as I do not have the failing setup.
Reviewers: rnk, morehouse, hctim, eugenis, vitalybuka
Reviewed By: rnk, hctim
Subscribers: mgorny, delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D64086
llvm-svn: 365045
They appear to fail to link in various 32-bit configurations for unknown
reasons. This change was already reverted, and it seems preferable to me
to make forward progress and remove this once the problems are fully
understood.
llvm-svn: 364877
Summary:
This is a redo of D63612.
Two problems came up on some bots:
- `__builtin_umull_overflow` was not declared. This is likely due to an
older clang or gcc, so add a guard with `__has_builtin` and fallback
to a division in the event the builtin doesn't exist;
- contradicting definition for `malloc`, etc. This is AFAIU due to the
fact that we ended up transitively including `stdlib.h` in the `.inc`
due to it being the flags parser header: so move the include to the
cc instead.
This should fix the issues, but since those didn't come up in my local
tests it's mostly guesswork.
Rest is the same!
Reviewers: morehouse, hctim, eugenis, vitalybuka, dyung, hans
Reviewed By: morehouse, dyung, hans
Subscribers: srhines, mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D63831
llvm-svn: 364547
Makes the build fail with e.g.
llvm/projects/compiler-rt/lib/scudo/standalone/wrappers_c.inc:20:68: error:
declaration of 'void* calloc(size_t, size_t)' has a different exception
specifier
INTERFACE WEAK void *SCUDO_PREFIX(calloc)(size_t nmemb, size_t size) {
^
See llvm-commits thread.
> Summary:
> This CL adds C & C++ wrappers and associated tests. Those use default
> configurations for a Scudo combined allocator that will likely be
> tweaked in the future.
>
> This is the final CL required to have a functional C & C++ allocator
> based on Scudo.
>
> The structure I have chosen is to define the core C allocation
> primitives in an `.inc` file that can be customized through defines.
> This allows to easily have 2 (or more) sets of wrappers backed by
> different combined allocators, as demonstrated by the `Bionic`
> wrappers: one set for the "default" allocator, one set for the "svelte"
> allocator.
>
> Currently all the tests added have been gtests, but I am planning to
> add some more lit tests as well.
>
> Reviewers: morehouse, eugenis, vitalybuka, hctim, rengolin
>
> Reviewed By: morehouse
>
> Subscribers: srhines, mgorny, delcypher, jfb, #sanitizers, llvm-commits
>
> Tags: #llvm, #sanitizers
>
> Differential Revision: https://reviews.llvm.org/D63612
llvm-svn: 364400
Summary:
There is an error in the shared TSD registry logic when looking for a
TSD in the slow path. There is an unlikely event when a TSD's precedence
was 0 after attempting a `tryLock` which indicated that it was grabbed
by another thread in between. We dealt with that case by continuing to
the next iteration, but that meant that the `Index` was not increased
and we ended up trying to lock the same TSD.
This would manifest in heavy contention, and in the end we would still
lock a TSD, but that was a wasted iteration.
So, do not `continue`, just skip the TSD as a potential candidate.
This is in both the standalone & non-standalone versions.
Reviewers: morehouse, eugenis, vitalybuka, hctim
Reviewed By: morehouse
Subscribers: delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D63783
llvm-svn: 364345
Summary:
This CL adds C & C++ wrappers and associated tests. Those use default
configurations for a Scudo combined allocator that will likely be
tweaked in the future.
This is the final CL required to have a functional C & C++ allocator
based on Scudo.
The structure I have chosen is to define the core C allocation
primitives in an `.inc` file that can be customized through defines.
This allows to easily have 2 (or more) sets of wrappers backed by
different combined allocators, as demonstrated by the `Bionic`
wrappers: one set for the "default" allocator, one set for the "svelte"
allocator.
Currently all the tests added have been gtests, but I am planning to
add some more lit tests as well.
Reviewers: morehouse, eugenis, vitalybuka, hctim, rengolin
Reviewed By: morehouse
Subscribers: srhines, mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D63612
llvm-svn: 364332
Summary:
Fuchsia wants to use mutexes with PI in the Scudo code, as opposed to
our own implementation. This required making `lock` & `unlock` platform
specific (as opposed to `wait` & `wake`) [code courtesy of John
Grossman].
There is an additional flag required now for mappings as well:
`ZX_VM_ALLOW_FAULTS`.
Reviewers: morehouse, mcgrathr, eugenis, vitalybuka, hctim
Reviewed By: morehouse
Subscribers: delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D63435
llvm-svn: 363705
Summary:
The Combined allocator hold together all the other components, and
provides a memory allocator interface based on various template
parameters. This will be in turn used by "wrappers" that will provide
the standard C and C++ memory allocation functions, but can be
used as is as well.
This doesn't depart significantly from the current Scudo implementation
except for a few details:
- Quarantine batches are now protected by a header a well;
- an Allocator instance has its own TSD registry, as opposed to a
static one for everybody;
- a function to iterate over busy chunks has been added, for Android
purposes;
This also adds the associated tests, and a few default configurations
for several platforms, that will likely be further tuned later on.
Reviewers: morehouse, hctim, eugenis, vitalybuka
Reviewed By: morehouse
Subscribers: srhines, mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D63231
llvm-svn: 363569
Summary:
The more tests are added, the more we are limited by the size of the
address space on 32-bit. Implement `unmapTestOnly` all around (like it
is in sanitzer_common) to be able to free up some memory.
This is not intended to be a proper "destructor" for an allocator, but
allows us to not fail due to having no memory left.
Reviewers: morehouse, vitalybuka, eugenis, hctim
Reviewed By: morehouse
Subscribers: delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D63146
llvm-svn: 363095
Summary:
This CL adds the structures dealing with thread specific data for the
allocator. This includes the thread specific data structure itself and
two registries for said structures: an exclusive one, where each thread
will have its own TSD struct, and a shared one, where a pool of TSD
structs will be shared by all threads, with dynamic reassignment at
runtime based on contention.
This departs from the current Scudo implementation: we intend to make
the Registry a template parameter of the allocator (as opposed to a
single global entity), allowing various allocators to coexist with
different TSD registry models. As a result, TSD registry and Allocator
are tightly coupled.
This also corrects a couple of things in other files that I noticed
while adding this.
Reviewers: eugenis, vitalybuka, morehouse, hctim
Reviewed By: morehouse
Subscribers: srhines, mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D62258
llvm-svn: 362962
Summary:
This CL introduces the 32 & 64-bit primary allocators, and associated
Local Cache. While the general idea is mostly similar to what exists
in sanitizer_common, it departs from the original code somewhat
significantly:
- the 64-bit primary no longer uses a free array at the end of a region
but uses batches of free blocks in region 0, allowing for a
convergence with the 32-bit primary behavior;
- as a result, there is only one (templated) local cache type for both
primary allocators, and memory reclaiming can be implemented similarly
for the 32-bit & 64-bit platforms;
- 64-bit primary regions are handled a bit differently: we do not
reserve 4TB of memory that we split, but reserve `NumClasses *
2^RegionSizeLog`, each region being offseted by a random number of
pages from its computed base. A side effect of this is that the 64-bit
primary works on 32-bit platform (I don't think we want to encourage
it but it's an interesting side effect);
Reviewers: vitalybuka, eugenis, morehouse, hctim
Reviewed By: morehouse
Subscribers: srhines, mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D61745
llvm-svn: 361159
Summary:
... and its related functions.
The structure and its functionalities are identical to existing ones.
The header stores information on a `scudo::Chunk` to be able to detect
inconsitencies or potential corruption attempts. It is checksummed for
that purpose.
Reviewers: morehouse, eugenis, vitalybuka, hctim
Reviewed By: vitalybuka
Subscribers: mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D61654
llvm-svn: 360290
Summary:
The Quarantine is used to hold chunks for a little while prior to
actually releasing them for potential reuse. The code is pretty much
the same as the sanitizer_common one, with additional shuffling of
the quarantine batches to decrease predictability of allocation
patterns when it is enabled.
Reviewers: vitalybuka, eugenis, hctim, morehouse
Reviewed By: morehouse
Subscribers: mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D61385
llvm-svn: 360163
Currently VMO in Zircon create using the zx_vmo_create is resizable
by default, but we'll be changing this in the future, requiring an
explicit flag to make the VMO resizable.
Prepare for this change by passing ZX_VMO_RESIZABLE option to all
zx_vmo_create calls that need resizable VMO.
Differential Revision: https://reviews.llvm.org/D61450
llvm-svn: 359803
Summary:
This CL implements the memory reclaiming function `releaseFreeMemoryToOS`
and its associated classes. Most of this code was originally written by
Aleksey for the Primary64 in sanitizer_common, and I made some changes to
be able to implement 32-bit reclaiming as well. The code has be restructured
a bit to accomodate for freelist of batches instead of the freearray used
in the current sanitizer_common code.
Reviewers: eugenis, vitalybuka, morehouse, hctim
Reviewed By: vitalybuka
Subscribers: srhines, mgorny, delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D61214
llvm-svn: 359567
Summary:
As with the sanitizer_common allocator, the SCM allows for efficient
mapping between sizes and size-classes, table-free.
It doesn't depart significantly from the original, except that we
allow the use of size-class 0 for other purposes (as opposed to
chunks of size 0). The Primary will use it to hold TransferBatches.
Reviewers: vitalybuka, eugenis, hctim, morehouse
Reviewed By: vitalybuka
Subscribers: srhines, mgorny, delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D61088
llvm-svn: 359199
Summary:
The Secondary allocator wraps the platform allocation primitives. It is
meant to be used for larger sizes that the Primary can't fullfill, as
it will be slower, and sizes are multiple of the system page size.
This also changes some of the existing code, notably the opaque
platform data being passed to the platform specific functions: we can
shave a couple of syscalls on Fuchsia by storing additional data (this
addresses a TODO).
Reviewers: eugenis, vitalybuka, hctim, morehouse
Reviewed By: morehouse
Subscribers: mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D60787
llvm-svn: 359097
Summary:
As with other Sanitizers, and the current version of Scudo, we can
provide flags in differents way: at compile time, through a weak
function, through an environment variable.
This change adds support for the configuration flags, and the string
parsers. Those are fairly similar to the sanitizer_common way of doing
things.
Reviewers: morehouse, hctim, vitalybuka
Reviewed By: morehouse, vitalybuka
Subscribers: mgorny, delcypher, jdoerfert, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D59597
llvm-svn: 358011
Summary:
This change adds fatal error messages for various error conditions that
will be added later in the code.
This also addresses a `TODO` now that we have `reportCheckFailed` (which
lead me to notice a few variables that were not cased properly so I
changed that as well).
Reviewers: morehouse, hctim, vitalybuka
Reviewed By: morehouse, hctim, vitalybuka
Subscribers: mgorny, delcypher, jfb, jdoerfert, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D59551
llvm-svn: 356556
Summary:
Add some string utility functions, notably to format strings, get
lengths, convert a string to a number. Those functions will be
used in reports and flags (coming up next). They were mostly borrowed
from sanitizer_common.
Make use of the string length function in a couple places in the
platform code that was checked in with inlined version of it.
Add some tests.
Reviewers: morehouse, eugenis, vitalybuka, hctim
Reviewed By: morehouse, vitalybuka
Subscribers: mgorny, delcypher, jdoerfert, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D59262
llvm-svn: 356457
Summary:
This CL implements the checksumming functions. This departs from the
current Scudo code in one aspect: the software version is no longer
CRC32 but a BSD checksum. This is because the software CRC32 was too
impactful in terms of performances, the BSD checksum has no array
lookup which is better (and saves 1KB of data).
As with the current version, we only flip the CRC compiler flag for
a single compilation unit by default, to allow for a library compiled
with HW CRC32 to work on a system without HW CRC32.
There is some platform & hardware specific code in those files, but
since departs from a mere platform split, it felt right to me to have
it that way.
Reviewers: morehouse, eugenis, vitalybuka, hctim, mcgrathr
Reviewed By: morehouse
Subscribers: mgorny, delcypher, jfb, jdoerfert, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D59116
llvm-svn: 355923
Summary:
This adds simple local & global stats classes to be used by the Primary
and Secondary, and associated test. Note that we don't need the strict
atomicity of the addition & subtraction (as is in sanitizer_common) so
we just use load & store.
Reviewers: morehouse, vitalybuka, eugenis, flowerhack, dmmoore415
Reviewed By: morehouse, vitalybuka
Subscribers: mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D59031
llvm-svn: 355643
Summary:
The bytemap classes will be used by the primary32 allocator to associate
classes with memory regions. It's similar to the sanitizer_common one
except for the fact that the base (level1) maps are mapped instead of
being static to reduce the memory footprint of an uninitialized allocator.
Reviewers: vitalybuka, eugenis, morehouse, flowerhack, dmmoore415, mcgrathr
Reviewed By: vitalybuka, morehouse
Subscribers: mgorny, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D58723
llvm-svn: 355416
Summary:
A missing `STATIC` entailed some annoying to debug failures wrt 32 vs 64
binaries. Additionally I noticed I was using the wrong variable (the Scudo
one as opposed to the Scudo Standalone one).
See https://reviews.llvm.org/D58184#1412417 and below for discussion.
Reviewers: vitalybuka, eugenis, brzycki
Reviewed By: vitalybuka, brzycki
Subscribers: mgorny, delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D58794
llvm-svn: 355203
Summary:
This CL adds a standalone vector class that will be used by the scoped
strings when they land. We reimplement our own vector class because we
can't use the std library one.
It's mostly borrowed from the current sanitizer_common one, with LLVM
code style changes.
Additionnally a casing change in a function name that slipped through
the previous review (the function isn't used yet).
Reviewers: vitalybuka, eugenis, flowerhack, dmmoore415, mcgrathr, morehouse
Reviewed By: vitalybuka
Subscribers: mgorny, delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D58689
llvm-svn: 354999
Summary:
This CL adds the platform specific code for Fuchsia, Linux & Android,
as well as some tests related to those (more tests to come later).
While some of it is pretty much a straight port of the existing scudo &
sanitizer_common code, the memory mapping functions have been reworked
a bit to fit the limited usage scenario that Scudo has for them.
For Fuchsia, I can now track the Vmar/Vmo pair for memory mappings if
there is an intent to grow or decommit some mapping (that will be
useful for the Primary).
Reviewers: eugenis, vitalybuka, mcgrathr, phosek, flowerhack, morehouse, dmmoore415
Reviewed By: vitalybuka, morehouse
Subscribers: kcc, dvyukov, srhines, mgorny, delcypher, jfb, jdoerfert, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D58184
llvm-svn: 354895
Add missed value "libcxxabi" and introduce SANITIZER_TEST_CXX for linking
unit tests. This needs to be a full C++ library and cannot be libcxxabi.
Recommit r354132 which I reverted in r354153 because it broke a sanitizer
bot. This was because of the "fixes" for pthread linking, so I've removed
these changes.
Differential Revision: https://reviews.llvm.org/D58012
llvm-svn: 354198
Add missed value "libcxxabi" and introduce SANITIZER_TEST_CXX for linking
unit tests. This needs to be a full C++ library and cannot be libcxxabi.
Differential Revision: https://reviews.llvm.org/D58012
llvm-svn: 354132
Summary:
The standalone Scudo version is being built with `-Werror` which can be
tripped by extraneous command line arguments. We have little control over
those as they can be passed down to us by `CMAKE_C(XX)_FLAGS`, the reported
scenario involving `-stdlib=libc++` (see https://reviews.llvm.org/D57412#1384504).
To work around this, disable `-Wunused-command-line-argument`.
Reviewers: eugenis, vitalybuka, Eugene.Zelenko
Reviewed By: eugenis
Subscribers: mgorny, delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D57757
llvm-svn: 353418
Summary:
This is the initial check-in for the Standalone version of Scudo.
The project is initially going to live in scudo/standalone then will
replace scudo. See http://lists.llvm.org/pipermail/llvm-dev/2019-January/129113.html
for details.
This initial CL is meant to lay out the project structure, of both
code & tests, providing a minimal amount of functionalities, namely
various definitions, some atomic helpers and an intrusive list.
(empty.cc is just here to have a compilation unit, but will go away
in the upcoming CLs).
Initial support is restricted to Linux i386 & x86_64 in make files
and will be extended once things land & work.
We will grow organically from here, adding functionalities in limited
amounts.
Reviewers: morehouse, eugenis, vitalybuka, kcc, mcgrathr, flowerhack
Reviewed By: morehouse, vitalybuka
Subscribers: srhines, mgorny, krytarowski, delcypher, jfb, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D57412
llvm-svn: 353055
Peter Collingbourne