Allow users to create aliases for aliases to raw input commands. That probably
sounds convoluted, so here's an example:
```
command alias some-setup env SOMEVAR=SOMEVALUE
```
This an alias based on `env`, which itself is an alias for `_regex-env`.
`_regex-env` is a `command regex` command, which takes raw input.
The above `some-setup` alias fails with:
```
error: Unable to create requested alias.
```
This change allows such aliases to be created. lldb already supports aliases to
aliases for parsed commands.
Differential Revision: https://reviews.llvm.org/D117259
Although the memory tag commands use a memory tag manager to handle
addresses, that only removes the top byte.
That top byte is 4 bits of memory tag and 4 free bits, which is more
than it should strictly remove but that's how it is for now.
There are other non-address bit uses like pointer authentication.
To ensure the memory tag manager only has to deal with memory tags,
use the ABI plugin to remove the rest.
The tag access test has been updated to sign all the relevant pointers
and require that we're running on a system with pointer authentication
in addition to memory tagging.
The pointers will look like:
<4 bit user tag><4 bit memory tag><signature><bit virtual address>
Note that there is currently no API for reading memory tags. It will
also have to consider this when it arrives.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D117672
Ensure that errors in `frame variable` are reflected in result object.
The statistics for `frame variable` show invocations as being successful, even
when executing one of the error paths.
This change replaces `result.GetErrorStream()` with `result.AppendError()`,
which also sets the status to `eReturnStatusFailed`.
Differential Revision: https://reviews.llvm.org/D116788
Recommitting after D116901 and D116863.
(cherry picked from commit 2c7d10c412)
Addresses on AArch64 can have top byte tags, memory tags and pointer
authentication signatures in the upper bits.
While testing memory tagging I found that memory read couldn't
read a range if the two addresses had different tags. The same
could apply to signed pointers given the right circumstance.
(lldb) memory read mte_buf_alt_tag mte_buf+16
error: end address (0x900fffff7ff8010) must be greater than the start
address (0xa00fffff7ff8000).
Or it would try to read a lot more memory than expected.
(lldb) memory read mte_buf mte_buf_alt_tag+16
error: Normally, 'memory read' will not read over 1024 bytes of data.
error: Please use --force to override this restriction just once.
error: or set target.max-memory-read-size if you will often need a
larger limit.
Fix this by removing non address bits before we calculate the read
range. A test is added for AArch64 Linux that confirms this by using
the top byte ignore feature.
This means that if you do read with a tagged pointer the output
does not include those tags. This is potentially confusing but I think
overall it's better that we don't pretend that we're reading memory
from a range that the process is unable to map.
(lldb) p ptr1
(char *) $4 = 0x3400fffffffff140 "\x80\xf1\xff\xff\xff\xff"
(lldb) p ptr2
(char *) $5 = 0x5600fffffffff140 "\x80\xf1\xff\xff\xff\xff"
(lldb) memory read ptr1 ptr2+16
0xfffffffff140: 80 f1 ff ff ff ff 00 00 38 70 bc f7 ff ff 00 00 ........8p......
Reviewed By: omjavaid, danielkiss
Differential Revision: https://reviews.llvm.org/D103626
Ensure that errors in `frame variable` are reflected in result object.
The statistics for `frame variable` show invocations as being successful, even
when executing one of the error paths.
This change replaces `result.GetErrorStream()` with `result.AppendError()`,
which also sets the status to `eReturnStatusFailed`.
Differential Revision: https://reviews.llvm.org/D116788
(cherry picked from commit 2c7d10c412)
Ensure that errors in `frame variable` are reflected in result object.
The statistics for `frame variable` show invocations as being successful, even
when executing one of the error paths.
This change replaces `result.GetErrorStream()` with `result.AppendError()`,
which also sets the status to `eReturnStatusFailed`.
Differential Revision: https://reviews.llvm.org/D116788
The current help for `frame variable` is somewhat long. Its length, combined
with the few aliases (`var`, `v`, and `vo`) can make the output of `apropos`
redundant and noisy.
This separates out the details into a separate long help.
Differential Revision: https://reviews.llvm.org/D116708
When we switched options over to use the Options.td file, a bug was introduced that caused the "-g" option for "settings set" to require a filename arguemnt. This patch fixes this issue and adds a test so this doesn't regress.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D116012
Because of its dependency on clang (and potentially other compilers
downstream, such as swift) lldb_private::GetVersion already lives in its
own library called lldbBase. Despite that, its implementation was spread
across unrelated files. This patch improves things by introducing a
Version library with its own directory, header and implementation file.
The benefits of this patch include:
- We can get rid of the ugly quoting macros.
- Other parts of LLDB can read the version number from
lldb/Version/Version.inc.
- The implementation can be swapped out for tools like lldb-server than
don't need to depend on clang at all.
Differential revision: https://reviews.llvm.org/D115211
Also add tests to check that we print the warning in the right
circumstances.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D114877
Certain commands like 'memory write', 'register read' etc all use
the OptionGroupFormat options but the help usage text for those
options is not customized to those commands.
One such example is:
(lldb) help memory read
-s <byte-size> ( --size <byte-size> )
The size in bytes to use when displaying with the selected format.
(lldb) help memory write
-s <byte-size> ( --size <byte-size> )
The size in bytes to use when displaying with the selected format.
This patch allows such commands to overwrite the help text for the options
in the OptionGroupFormat group as needed and fixes help text of memory write.
llvm.org/pr49018.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D114448
Currently the 'memory write' command allows specifying the values when
writing the file contents to memory but the values are actually ignored. This
patch fixes that by erroring out when values are specified in such cases.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D114544
The reworking of the gdb client tests into the PlatformClientTestBase broke
the test for this. I did the mutatis mutandis for the move, but the test
still fails. Reverting till I have time to figure out why.
This reverts commit b715b79d54.
We don't actually need a local copy of the main executable to debug
a remote process. So instead of treating "no local module" as an error,
see if the LaunchInfo has an executable it wants lldb to use, and if so
use it. Then report whatever error the remote server returns.
Differential Revision: https://reviews.llvm.org/D113521
[NFC] As part of using inclusive language within the llvm project, this patch
renames master plan to controlling plan in lldb.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D113019
The amount of roundtrips between StringRefs, ConstStrings and std::strings is
getting a bit out of hand, this patch avoid the unnecessary roundtrips.
Reviewed By: wallace, aprantl
Differential Revision: https://reviews.llvm.org/D112863
The new module stats adds the ability to measure the time it takes to parse and index the symbol tables for each module, and reports modules statistics in the output of "statistics dump" along with the path, UUID and triple of the module. The time it takes to parse and index the symbol tables are also aggregated into new top level key/value pairs at the target level.
Differential Revision: https://reviews.llvm.org/D112279
This patch is a smaller version of a previous patch https://reviews.llvm.org/D110804.
This patch modifies the output of "statistics dump" to be able to get stats from the current target. It adds 3 new stats as well. The output of "statistics dump" is now emitted as JSON so that it can be used to track performance and statistics and the output could be used to populate a database that tracks performance. Sample output looks like:
(lldb) statistics dump
{
"expressionEvaluation": {
"failures": 0,
"successes": 0
},
"firstStopTime": 0.34164492800000001,
"frameVariable": {
"failures": 0,
"successes": 0
},
"launchOrAttachTime": 0.31969605400000001,
"targetCreateTime": 0.0040863039999999998
}
The top level keys are:
"expressionEvaluation" which replaces the previous stats that were emitted as plain text. This dictionary contains the success and fail counts.
"frameVariable" which replaces the previous stats for "frame variable" that were emitted as plain text. This dictionary contains the success and fail counts.
"targetCreateTime" contains the number of seconds it took to create the target and load dependent libraries (if they were enabled) and also will contain symbol preloading times if that setting is enabled.
"launchOrAttachTime" is the time it takes from when the launch/attach is initiated to when the first private stop occurs.
"firstStopTime" is the time in seconds that it takes to stop at the first stop that is presented to the user via the LLDB interface. This value will only have meaning if you set a known breakpoint or stop location in your code that you want to measure as a performance test.
This diff is also meant as a place to discuess what we want out of the "statistics dump" command before adding more funcionality. It is also meant to clean up the previous code that was storting statistics in a vector of numbers within the lldb_private::Target class.
Differential Revision: https://reviews.llvm.org/D111686
Based on post-commit review discussion on
2bd8493847 with Richard Smith.
Other uses of forcing HasEmptyPlaceHolder to false seem OK to me -
they're all around pointer/reference types where the pointer/reference
token will appear at the rightmost side of the left side of the type
name, so they make nested types (eg: the "int" in "int *") behave as
though there is a non-empty placeholder (because the "*" is essentially
the placeholder as far as the "int" is concerned).
This was originally committed in 277623f4d5
Reverted in f9ad1d1c77 due to breakages
outside of clang - lldb seems to have some strange/strong dependence on
"char [N]" versus "char[N]" when printing strings (not due to that name
appearing in DWARF, but probably due to using clang to stringify type
names) that'll need to be addressed, plus a few other odds and ends in
other subprojects (clang-tools-extra, compiler-rt, etc).
This patch deals with ObjectFile, ObjectContainer and OperatingSystem
plugins. I'll convert the other types in separate patches.
In order to enable piecemeal conversion, I am leaving some ConstStrings
in the lowest PluginManager layers. I'll convert those as the last step.
Differential Revision: https://reviews.llvm.org/D112061
When you invoke "help type filter" the resulting help shows:
Syntax: type synthetic [<sub-command-options>]
This patch fixes the help so it says "type filter" instead of "type synthetic".
patch by: "Daniel Jalkut <jalkut@red-sweater.com>"
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D112199
This adds the `target dump typesystem'`command which dumps the TypeSystem of the
target itself (aka the 'scratch TypeSystem'). This is similar to `target modules
dump ast` which dumps the AST of lldb::Modules associated with a selected
target.
Unlike `target modules dump ast`, the new command is not a subcommand of `target
modules dump` as it's not touching the modules of a target at all. Also unlike
`target modules dump ast` I tried to keep the implementation language-neutral,
so this patch moves our Clang `Dump` to the `TypeSystem` interface so it will
also dump the state of any future/downstream scratch TypeSystems (e.g., Swift).
That's also why the command just refers to a 'typesystem' instead of an 'ast'
(which is only how Clang is necessarily modelling the internal TypeSystem
state).
The main motivation for this patch is that I need to write some tests that check
for duplicates in the ScratchTypeSystemClang of a target. There is currently no
way to check for this at the moment (beside measuring memory consumption of
course). It's probably also useful for debugging LLDB itself.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D111936
The point is to allow users with a related set of script based commands
to organize their commands in a hierarchy in the command set, rather than
having to have only top-level commands.
Differential Revision: https://reviews.llvm.org/D110298
There is no reason why this function should be returning a ConstString.
While modifying these files, I also fixed several instances where
GetPluginName and GetPluginNameStatic were returning different strings.
I am not changing the return type of GetPluginNameStatic in this patch, as that
would necessitate additional changes, and this patch is big enough as it is.
Differential Revision: https://reviews.llvm.org/D111877
Previously it was not clear what arguments this required, or what it would do if you didn't pass the destination argument.
Differential Revision: https://reviews.llvm.org/D110981
The issue here was that we were not updating the interpreter's
execution context when calling HandleCommand to continue the process.
Since we had just created the process, it wasn't in the interpreter's
execution context so HandleCommand failed at CheckRequirements. The
patch fixes that by passing the process execution context directly
to HandleCommand.
Differential Revision: https://reviews.llvm.org/D110787
We added some support for this mode back in 2015, but the feature was
never productionized. It is completely untested, and there are known
major structural lldb issues that need to be resolved before this
feature can really be supported.
It also complicates making further changes to stop reply packet
handling, which is what I am about to do.
Differential Revision: https://reviews.llvm.org/D110553
If we applied a fix-it before evaluating an expression and that
expression didn't evaluate correctly, we should still tell users about
the fix-it we applied since that may be the reason why it didn't work
correctly.
Differential Revision: https://reviews.llvm.org/D109908
LLDB has a bunch of code that implements REPL support, but all that code is
unreachable as no language in master currently has an implemented REPL backend.
The only REPL that exists is in the downstream Swift fork. All patches for this
generic REPL code therefore also only have tests downstream which is clearly not
a good situation.
This patch implements a basic C language REPL on top of LLDB's REPL framework.
Beside implementing the REPL interface and hooking it up into the plugin
manager, the only other small part of this patch is making the `--language` flag
of the expression command compatible with the `--repl` flag. The `--repl` flag
uses the value of `--language` to see which REPL should be started, but right
now the `--language` flag is only available in OptionGroups 1 and 2, but not in
OptionGroup 3 where the `--repl` flag is declared.
The REPL currently can currently only start if a running target exists. I'll add
the 'create and run a dummy executable' logic from Swift (which is requires when
doing `lldb --repl`) when I have time to translate all this logic to something
that will work with Clang.
I should point out that the REPL currently uses the C expression parser's
approach to persistent variables where only result variables and the ones
starting with a '$' are transferred between expressions. I'll fix that in a
follow up patch. Also the REPL currently doesn't work in a non-interactive
terminal. This seems to be fixed in the Swift fork, so I assume one of our many
REPL downstream changes addresses the issue.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D87281
Currently you can ask the target symbols add command to locate the debug
symbols for the current frame. This patch add an options to do that for
the whole call stack.
Differential revision: https://reviews.llvm.org/D110011
This moves the logic for adding symbols based on UUID, file and frame
into little helper functions. This is in preparation for D110011.
Differential revision: https://reviews.llvm.org/D110010
instead of a pointer. There are just two callers of this function, and
both of them have a valid target pointer, so there's no need for all
implementations to concern themselves with whether the pointer is null.
Add two new commands 'platform get-file-permissions' and 'platform
file-exists' for the respective bits of LLDB protocol. Add tests for
them. Fix error handling in GetFilePermissions().
Differential Revision: https://reviews.llvm.org/D107809
Remove File::eOpenOptionAppend from the mode used by 'platform file
open' command. According to POSIX, O_APPEND causes all successive
writes to be done at the end of the file. This effectively makes
the offset argument to 'platform file write' meaningless.
Furthermore, apparently O_APPEND is not implemented reliably everywhere.
The Linux manpage for pwrite(2) suggests that Linux does respect
O_APPEND there while according to POSIX it should not, so the actual
behavior would be dependent on how the vFile:pwrite packet is
implemented on the server.
Ideally, the mode used for opening flags would be provided via options.
However, changing the default mode seems to be a reasonable intermediate
solution.
Differential Revision: https://reviews.llvm.org/D107664
Fix 'platform file read' and 'platform file write' commands to correctly
detect erraneous return and report it as such. Currently, errors were
implicitly printed as a return value of -1, and the commands were
assumed to be successful.
Differential Revision: https://reviews.llvm.org/D107665
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
This relands commit aafa05e, reverted in 1f986f6.
Failed tests were fixed.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
It is currently possible to register a frame recognizer, but it will be applied if and only if the frame's PC points to the very first instruction of the specified function, which limits usability of this feature.
The implementation already supports changing this behaviour by passing an additional flag, but it's not possible to set it via the command interface. Fix that.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D108510
added new command "process trace save -d <directory>".
-it saves a JSON file as <directory>/trace.json, with the main properties of the trace session.
-it saves binary Intel-pt trace as <directory>/thread_id.trace; each file saves each thread.
-it saves modules to the directory <directory>/modules .
-it only works for live process and it only support Intel-pt right now.
Example:
```
b main
run
process trace start
n
process trace save -d /tmp/mytrace
```
A file named trace.json and xxx.trace should be generated in /tmp/mytrace. To load the trace that was just saved:
```
trace load /tmp/mytrace
thread trace dump instructions
```
You should see the instructions of the trace got printed.
To run a test:
```
cd ~/llvm-sand/build/Release/fbcode-x86_64/toolchain
ninja lldb-dotest
./bin/lldb-dotest -p TestTraceSave
```
Reviewed By: wallace
Differential Revision: https://reviews.llvm.org/D107669
Add a field to the qMemoryRegionInfo packet where the remote stub
can describe the type of memory -- heap, stack. Keep track of
memory regions that are stack memory in lldb. Add a new "--style
stack" to process save-core to request that only stack memory be
included in the corefile.
Differential Revision: https://reviews.llvm.org/D107625
This patch should fix the use-after-free error that was brought up by
the LLDB ASAN Green Dragon bot.
This is caused because the `StringRef` object was acquired too early
before being use and by the underlying memory was modified which caused
it to point to null memory.
Fetching back the string reference close to its usage location should
fix the issue.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Modify OpenOptions enum to open the future path into synchronizing
vFile:open bits with GDB. Currently, LLDB and GDB use different flag
models effectively making it impossible to match bits. Notably, LLDB
uses two bits to indicate read and write status, and uses union of both
for read/write. GDB uses a value of 0 for read-only, 1 for write-only
and 2 for read/write.
In order to future-proof the code for the GDB variant:
1. Add a distinct eOpenOptionReadWrite constant to be used instead
of (eOpenOptionRead | eOpenOptionWrite) when R/W access is required.
2. Rename eOpenOptionRead and eOpenOptionWrite to eOpenOptionReadOnly
and eOpenOptionWriteOnly respectively, to make it clear that they
do not mean to be combined and require update to all call sites.
3. Use the intersection of all three flags when matching against
the three possible values.
This commit does not change the actual bits used by LLDB.
Differential Revision: https://reviews.llvm.org/D106984
This provides a convenient way to limit a breakpoint
to the current thread when setting it from the command line w/o
having to figure out what the current thread is.
Differential Revision: https://reviews.llvm.org/D107015
Rather than passing two booleans around, which is especially error prone
with them being next to each other, use a struct with named fields
instead.
Differential revision: https://reviews.llvm.org/D107295
The "memory tag read" command will now tell you
when the allocation tag read does not match the logical
tag.
(lldb) memory tag read mte_buf+(8*16) mte_buf+(8*16)+48
Logical tag: 0x9
Allocation tags:
[0xfffff7ff7080, 0xfffff7ff7090): 0x8 (mismatch)
[0xfffff7ff7090, 0xfffff7ff70a0): 0x9
[0xfffff7ff70a0, 0xfffff7ff70b0): 0xa (mismatch)
The logical tag will be taken from the start address
so the end could have a different tag. You could for example
read from ptr_to_array_1 to ptr_to_array_2. Where the latter
is tagged differently to prevent buffer overflow.
The existing command will read 1 granule if you leave
off the end address. So you can also use it as a quick way
to check a single location.
(lldb) memory tag read mte_buf
Logical tag: 0x9
Allocation tags:
[0xfffff7ff7000, 0xfffff7ff7010): 0x0 (mismatch)
This avoids the need for a seperate "memory tag check" command.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D106880
The default mode of "memory tag write" is to calculate the
range from the start address and the number of tags given.
(just like "memory write" does)
(lldb) memory tag write mte_buf 1 2
(lldb) memory tag read mte_buf mte_buf+48
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
[0xfffff7ff9020, 0xfffff7ff9030): 0x0
This new option allows you to set an end address and have
the tags repeat until that point.
(lldb) memory tag write mte_buf 1 2 --end-addr mte_buf+64
(lldb) memory tag read mte_buf mte_buf+80
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
[0xfffff7ff9020, 0xfffff7ff9030): 0x1
[0xfffff7ff9030, 0xfffff7ff9040): 0x2
[0xfffff7ff9040, 0xfffff7ff9050): 0x0
This is implemented using the QMemTags packet previously
added. We skip validating the number of tags in lldb and send
them on to lldb-server, which repeats them as needed.
Apart from the number of tags, all the other client side checks
remain. Tag values, memory range must be tagged, etc.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105183
This adds a new command for writing memory tags.
It is based on the existing "memory write" command.
Syntax: memory tag write <address-expression> <value> [<value> [...]]
(where "value" is a tag value)
(lldb) memory tag write mte_buf 1 2
(lldb) memory tag read mte_buf mte_buf+32
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
The range you are writing to will be calculated by
aligning the address down to a granule boundary then
adding as many granules as there are tags.
(a repeating mode with an end address will be in a follow
up patch)
This is why "memory tag write" uses MakeTaggedRange but has
some extra steps to get this specific behaviour.
The command does all the usual argument validation:
* Address must evaluate
* You must supply at least one tag value
(though lldb-server would just treat that as a nop anyway)
* Those tag values must be valid for your tagging scheme
(e.g. for MTE the value must be > 0 and < 0xf)
* The calculated range must be memory tagged
That last error will show you the final range, not just
the start address you gave the command.
(lldb) memory tag write mte_buf_2+page_size-16 6
(lldb) memory tag write mte_buf_2+page_size-16 6 7
error: Address range 0xfffff7ffaff0:0xfffff7ffb010 is not in a memory tagged region
(note that we do not check if the region is writeable
since lldb can write to it anyway)
The read and write tag tests have been merged into
a single set of "tag access" tests as their test programs would
have been almost identical.
(also I have renamed some of the buffers to better
show what each one is used for)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105182
The old code incorrectly calculated the start position for the search
for the third (and subsequent) instance of a particular substitution
pattern (e.g. %1).
I also added a few test cases for this parsing covering this failure.
The code that figured out which breakpoints to delete was supposed
to set the result status if it found breakpoints, and then the code
that actually deleted them checked that the result's status was set.
The code for "break delete --disabled" failed to set the status if
no "protected" breakpoints were provided. This was a confusing way
to implement this, so I reworked it with early returns so it was less
error prone, and added a test case for the no arguments case.
Differential Revision: https://reviews.llvm.org/D106623
Copying from the inline documentation:
```
Trace exporter plug-ins operate on traces, converting the trace data provided by an \a lldb_private::TraceCursor into a different format that can be digested by other tools, e.g. Chrome Trace Event Profiler.
Trace exporters are supposed to operate on an architecture-agnostic fashion, as a TraceCursor, which feeds the data, hides the actual trace technology being used.
```
I want to use this to make the code in https://reviews.llvm.org/D105741 a plug-in. I also imagine that there will be more and more exporters being implemented, as an exporter creates something useful out of trace data. And tbh I don't want to keep adding more stuff to the lldb/Target folder.
This is the minimal definition for a TraceExporter plugin. I plan to use this with the following commands:
- thread trace export <plug-in name> [plug-in specific args]
- This command would support autocompletion of plug-in names
- thread trace export list
- This command would list the available trace exporter plug-ins
I don't plan to create yet a "process trace export" because it's easier to start analyzing the trace of a given thread than of the entire process. When we need a process-level command, we can implement it.
I also don't plan to force each "export" command implementation to support multiple threads (for example, "thread trace start 1 2 3" or "thread trace start all" operate on many threads simultaneously). The reason is that the format used by the exporter might or might not support multiple threads, so I'm leaving this decision to each trace exporter plug-in.
Differential Revision: https://reviews.llvm.org/D106501
`CompletionRequest::AddCompletion` adds the given string as completion of the
current command token. `CompletionRequest::TryCompleteCurrentArg` only adds it
if the current token is a prefix of the given string. We're using
`AddCompletion` for the `process signal` handler which means that `process
signal SIGIN` doesn't get uniquely completed to `process signal SIGINT` as we
unconditionally add all other signals (such as `SIGABRT`) as possible
completions.
By using `TryCompleteCurrentArg` we actually do the proper filtering which will
only add `SIGINT` (as that's the only signal with the prefix 'SIGIN' in the
example above).
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D105028
This patch adds code to process save-core for Mach-O files which
embeds an "addrable bits" LC_NOTE when the process is using a
code address mask (e.g. AArch64 v8.3 with ptrauth aka arm64e).
Add code to ObjectFileMachO to read that LC_NOTE from corefiles,
and ProcessMachCore to set the process masks based on it when reading
a corefile back in.
Also have "process status --verbose" print the current address masks
that lldb is using internally to strip ptrauth bits off of addresses.
Differential Revision: https://reviews.llvm.org/D106348
rdar://68630113
When the user types that command 'thread trace dump info' and there's a running Trace session in LLDB, a raw trace in bytes should be printed; the command 'thread trace dump info all' should print the info for all the threads.
Original Author: hanbingwang
Reviewed By: clayborg, wallace
Differential Revision: https://reviews.llvm.org/D105717
D104422 added the interface for TraceCursor, which is the main way to traverse instructions in a trace. This diff implements the corresponding cursor class for Intel PT and deletes the now obsolete code.
Besides that, the logic for the "thread trace dump instructions" was adapted to use this cursor (pretty much I ended up moving code from Trace.cpp to TraceCursor.cpp). The command by default traverses the instructions backwards, and if the user passes --forwards, then it's not forwards. More information about that is in the Options.td file.
Regarding the Intel PT cursor. All Intel PT cursors for the same thread share the same DecodedThread instance. I'm not yet implementing lazy decoding because we don't need it. That'll be for later. For the time being, the entire thread trace is decoded when the first cursor for that thread is requested.
Differential Revision: https://reviews.llvm.org/D105531
Previously GetMemoryTagManager checked many things in one:
* architecture supports memory tagging
* process supports memory tagging
* memory range isn't inverted
* memory range is all tagged
Since writing follow up patches for tag writing (in review
at the moment) it has become clear that this gets unwieldy
once we add the features needed for that.
It also implies that the memory tag manager is tied to the
range you used to request it with but it is not. It's a per
process object.
Instead:
* GetMemoryTagManager just checks architecture and process.
* Then the MemoryTagManager can later be asked to check a
memory range.
This is better because:
* We don't imply that range and manager are tied together.
* A slightly diferent range calculation for tag writing
doesn't add more code to Process.
* Range checking code can now be unit tested.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105630
Add the ability to silence command script import. The motivation for
this change is being able to add command script import -s
lldb.macosx.crashlog to your ~/.lldbinit without it printing the
following message at the beginning of every debug session.
"malloc_info", "ptr_refs", "cstr_refs", "find_variable", and
"objc_refs" commands have been installed, use the "--help" options on
these commands for detailed help.
In addition to forwarding the silent option to LoadScriptingModule, this
also changes ScriptInterpreterPythonImpl::ExecuteOneLineWithReturn and
ScriptInterpreterPythonImpl::ExecuteMultipleLines to honor the enable IO
option in ExecuteScriptOptions, which until now was ignored.
Note that IO is only enabled (or disabled) at the start of a session,
and for this particular use case, that's done when taking the Python
lock in LoadScriptingModule, which means that the changes to these two
functions are not strictly necessary, but (IMO) desirable nonetheless.
Differential revision: https://reviews.llvm.org/D105327
C++23 will make these conversions ambiguous - so fix them to make the
codebase forward-compatible with C++23 (& a follow-up change I've made
will make this ambiguous/invalid even in <C++23 so we don't regress
this & it generally improves the code anyway)
Previously, when `interpreter.save-session-on-quit` was enabled, lldb
would save the session transcript only when running the `quit` command.
This patch changes that so the transcripts are saved when the debugger
object is destroyed if the setting is enabled.
rdar://72902650
Differential Revision: https://reviews.llvm.org/D105038
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This new command looks much like "memory read"
and mirrors its basic behaviour.
(lldb) memory tag read new_buf_ptr new_buf_ptr+32
Logical tag: 0x9
Allocation tags:
[0x900fffff7ffa000, 0x900fffff7ffa010): 0x9
[0x900fffff7ffa010, 0x900fffff7ffa020): 0x0
Important proprties:
* The end address is optional and defaults to reading
1 tag if ommitted
* It is an error to try to read tags if the architecture
or process doesn't support it, or if the range asked
for is not tagged.
* It is an error to read an inverted range (end < begin)
(logical tags are removed for this check so you can
pass tagged addresses here)
* The range will be expanded to fit the tagging granule,
so you can get more tags than simply (end-begin)/granule size.
Whatever you get back will always cover the original range.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97285
Replacing existing uses with AppendError.
SetError is also part of the SBI API. This remains
but instead of calling the underlying SetError it
will call AppendError.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104768
Mostly by converting uses of GetErrorStream to AppendError,
so that the call to SetStatus is implicit.
Some remain where it isn't certain that you'll have a message
to set, or you want the output to be on stdout.
One place in CommandObjectWatchpoint previously didn't set
the status to failed at all. However it's pretty obvious
that it should do so.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104697
Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.
debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.
Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.
rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387
This adds a basic SB API for creating and stopping traces.
Note: This doesn't add any APIs for inspecting individual instructions. That'd be a more complicated change and it might be better to enhande the dump functionality to output the data in binary format. I'll leave that for a later diff.
This also enhances the existing tests so that they test the same flow using both the command interface and the SB API.
I also did some cleanup of legacy code.
Differential Revision: https://reviews.llvm.org/D103500
This is part 2, covering the commands source.
Some uses remain where it's tricky to see what the
logic is or they are not used with AppendError.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104448
This is an NFC cleanup.
Many of the API's that returned BreakpointOptions always returned valid ones.
Internally the BreakpointLocations usually have null BreakpointOptions, since they
use their owner's options until an option is set specifically on the location.
So the original code used pointers & unique_ptr everywhere for consistency.
But that made the code hard to reason about from the outside.
This patch changes the code so that everywhere an API is guaranteed to
return a non-null BreakpointOption, it returns it as a reference to make
that clear.
It also changes the Breakpoint to hold a BreakpointOption
member where it previously had a UP. Since we were always filling the UP
in the Breakpoint constructor, having the UP wasn't helping anything.
Differential Revision: https://reviews.llvm.org/D104162
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
A long time ago LLDB wanted to start using StringRef instead of
C-Strings/ConstString but was blocked by the fact that the StringRef constructor
that takes a C-string was asserting that the C-string isn't a nullptr. To
workaround this, D24697 introduced a special function called `withNullAsEmpty`
and that's what LLDB (and only LLDB) started to use to build StringRefs from
C-strings.
A bit later it seems that `withNullAsEmpty` was declared too awkward to use and
instead the assert in the StringRef constructor got removed (see D24904). The
rest of LLDB was then converted to StringRef by just calling the now perfectly
usable implicit constructor.
However, all the calls to `withNullAsEmpty` just remained and are now just
strange artefacts in the code base that just look out of place. It's also
curiously a LLDB-exclusive function and no other project ever called it since
it's introduction half a decade ago.
This patch removes all uses of `withNullAsEmpty`. The follow up will be to
remove the function from StringRef.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102597
These two commands add a list of commands to the breakpoint/watchpoint. The current
implementation only supports replacing the current command list. I started with
that as overwrite seems to be the most common operation. But using "add" will
allow us to later offer other add-modes: "prepend", "append" and "insert".
That and "overwrite" then make up a useful set of options for this operation.
The `--allow-jit` flag allows the user to force the IR interpreter to run the
provided expression.
The `--top-level` flag parses and injects the code as if its in the top level
scope of a source file.
Both flags just change the ExecutionPolicy of the expression:
* `--allow-jit true` -> doesn't change anything (its the default)
* `--allow-jit false` -> ExecutionPolicyNever
* `--top-level` -> ExecutionPolicyTopLevel
Passing `--allow-jit false` and `--top-level` currently causes the `--top-level`
to silently overwrite the ExecutionPolicy value that was set by `--allow-jit
false`. There isn't any ExecutionPolicy value that says "top-level but only
interpret", so I would say we reject this combination of flags until someone
finds time to refactor top-level feature out of the ExecutionPolicy enum.
The SBExpressionOptions suffer from a similar symptom as `SetTopLevel` and
`SetAllowJIT` just silently disable each other. But those functions don't have
any error handling, so not a lot we can do about this in the meantime.
Reviewed By: labath, kastiglione
Differential Revision: https://reviews.llvm.org/D91780
Commiting this patch for Augusto Noronha who is getting set
up still.
This patch changes Target::ReadMemory so the default behavior
when a read is in a Section that is read-only is to fetch the
data from the local binary image, instead of reading it from
memory. Update all callers to use their old preferences
(the old prefer_file_cache bool) using the new API; we should
revisit these calls and see if they really intend to read
live memory, or if reading from a read-only Section would be
equivalent and important for performance-sensitive cases.
rdar://30634422
Differential revision: https://reviews.llvm.org/D100338
The memory read --outfile command should truncate the output when unless
--append-outfile. Fix the bug and add a test.
rdar://76062318
Differential revision: https://reviews.llvm.org/D99890
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
This patch adds a new command options to the CommandObjectProcessLaunch
for scripted processes.
Among the options, the user need to specify the class name managing the
scripted process. The user can also use a key-value dictionary holding
arbitrary data that will be passed to the managing class.
This patch also adds getters and setters to `SBLaunchInfo` for the
class name managing the scripted process and the dictionary.
rdar://65508855
Differential Review: https://reviews.llvm.org/D95710
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
These warnings are raised when compiling with gcc due to either having too few or too many commas, or in the case of lldb, the possibility of a nullptr.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D97586
This patch adds a new command options to the CommandObjectProcessLaunch
for scripted processes.
Among the options, the user need to specify the class name managing the
scripted process. The user can also use a key-value dictionary holding
arbitrary data that will be passed to the managing class.
This patch also adds getters and setters to `SBLaunchInfo` for the
class name managing the scripted process and the dictionary.
rdar://65508855
Differential Review: https://reviews.llvm.org/D95710
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch changes the short option used in `CommandOptionsProcessLaunch`
for the `-v|--environment` command option to `-E|--environment`.
The reason for that is, that it collides with the `-v|--structured-data-value`
command option generated by `OptionGroupPythonClassWithDict` that
I'm using in an upcoming patch for the `process launch` command.
The long option `--environment` remains the same.
Differential Review: https://reviews.llvm.org/D95100
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch replaces the static large function threshold variable with a
global debugger setting (`stop-disassembly-max-size`).
The default threshold is now set to 32KB (instead of 8KB) and can be modified.
rdar://74726362
Differential Revision: https://reviews.llvm.org/D97486
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
The current API for printing errors/warnings/messages from LLDB commands
sometimes adds newlines behind the messages for the caller. However, this
happens unconditionally so when the caller already specified a trailing newline
in the error message (or is trying to print a generated error message that ends
in a newline), LLDB ends up printing both the automatically added newline and
the one that was in the error message string. This leads to all the randomly
appearing new lines in error such as:
```
(lldb) command a
error: 'command alias' requires at least two arguments
(lldb) apropos a b
error: 'apropos' must be called with exactly one argument.
(lldb) why is there an empty line behind the second error?
```
This code adds a check that only appends the new line if the passed message
doesn't already contain a trailing new line.
Also removes the AppendRawWarning which had only one caller and doesn't serve
any purpose now.
Reviewed By: #lldb, mib
Differential Revision: https://reviews.llvm.org/D96947
Following `7169d3a315f4cdc19c4ab6b8f20c6f91b46ba9b8`, this patch updates
the short option for the plugin command option to (`-p` to `-P`) to
align with the `process attach` command options.
The long option remains the same since there are already the same for both
commands.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch refactors the current implementation of
`ProcessLaunchCommandOptions` to be generated by TableGen.
The patch also renames the class to `CommandOptionsProcessLaunch` to
align better with the rest of the codebase style and moves it to
separate files.
Differential Review: https://reviews.llvm.org/D95059
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Replace uses of GetModuleAtIndexUnlocked and
GetModulePointerAtIndexUnlocked with the ModuleIterable and
ModuleIterableNoLocking where applicable.
Differential revision: https://reviews.llvm.org/D94271
GetCommandSPExact is called exaclty once with include_aliases set to
true, so make it a default argument. Use early returns to simplify the
implementation.
This patch introduces a LLDB_SCOPED_TIMER macro to hide the needlessly
repetitive creation of scoped timers in LLDB. It's similar to the
LLDB_LOG(F) macro.
Differential revision: https://reviews.llvm.org/D93663
This reverts commit a01b26fb51, because it
breaks the "finish" command in some way -- the command does not
terminate after it steps out, but continues running the target. The
exact blast radius is not clear, but it at least affects the usage of
the "finish" command in TestGuiBasicDebug.py. The error is *not*
gui-related, as the same issue can be reproduced by running the same
steps outside of the gui.
There is some kind of a race going on, as the test fails only 20% of the
time on the buildbot.
Currently, the interpreter's context is not updated until a command is executed.
This has resulted in the behavior of SB-interface functions and some commands
depends on previous user actions. The interpreter's context can stay uninitialized,
point to a currently selected target, or point to one of previously selected targets.
This patch removes any usages of CommandInterpreter::UpdateExecutionContext.
CommandInterpreter::HandleCommand* functions still may override context temporarily,
but now they always restore it before exiting. CommandInterpreter saves overriden
contexts to the stack, that makes nesting commands possible.
Added test reproduces one of the issues. Without this fix, the last assertion fails
because interpreter's execution context is empty until running "target list", so,
the value of the global property was updated instead of process's local instance.
Differential Revision: https://reviews.llvm.org/D92164
TargetList::CreateTarget automatically adds created target to the list, however,
CommandObjectTargetCreate does some additional preparation after creating a target
and which can fail. The command should remove created target if it failed. Since
the function has many ways to return, scope guard does this work safely.
Changes to the TargetList make target adding and selection more transparent.
Other changes remove unnecessary SetSelectedTarget after CreateTarget.
Differential Revision: https://reviews.llvm.org/D93052
LLDB is ignoring compilation errors for one-line breakpoint scripts.
This patch fixes the issues and now the error message of the
ScriptInterpreter is shown to the user.
I had to remove a new-line character for the Lua interpreter since it
was duplicated.
Differential Revision: https://reviews.llvm.org/D92729
Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. This is
used to prevent 'process connect' from picking up a plugin that can only
be used locally, e.g. the legacy FreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D91810
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
Depends on D90490.
The stop command is simple and invokes the new method Trace::StopTracingThread(thread).
On the other hand, the start command works by delegating its implementation to a CommandObject provided by the Trace plugin. This is necessary because each trace plugin needs different options for this command. There's even the chance that a Trace plugin can't support live tracing, but instead supports offline decoding and analysis, which means that "thread trace dump instructions" works but "thread trace start" doest. Because of this and a few other reasons, it's better to have each plugin provide this implementation.
Besides, I'm using the GetSupportedTraceType method introduced in D90490 to quickly infer what's the trace plug-in that works for the current process.
As an implementation note, I moved CommandObjectIterateOverThreads to its header so that I can use it from the IntelPT plugin. Besides, the actual start and stop logic for intel-pt is not part of this diff.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D90729
Depends on D89408.
This diff finally implements trace decoding!
The current interface is
$ trace load /path/to/trace/session/file.json
$ thread trace dump instructions
thread #1: tid = 3842849, total instructions = 22
[ 0] 0x40052d
[ 1] 0x40052d
...
[19] 0x400521
$ # simply enter, which is a repeat command
[20] 0x40052d
[21] 0x400529
...
This doesn't do any disassembly, which will be done in the next diff.
Changes:
- Added an IntelPTDecoder class, that is a wrapper for libipt, which is the actual library that performs the decoding.
- Added TraceThreadDecoder class that decodes traces and memoizes the result to avoid repeating the decoding step.
- Added a DecodedThread class, which represents the output from decoding and that for the time being only stores the list of reconstructed instructions. Later it'll contain the function call hierarchy, which will enable reconstructing backtraces.
- Added basic APIs for accessing the trace in Trace.h:
- GetInstructionCount, which counts the number of instructions traced for a given thread
- IsTraceFailed, which returns an Error if decoding a thread failed
- ForEachInstruction, which iterates on the instructions traced for a given thread, concealing the internal storage of threads, as plug-ins can decide to generate the instructions on the fly or to store them all in a vector, like I do.
- DumpTraceInstructions was updated to print the instructions or show an error message if decoding was impossible.
- Tests included
Differential Revision: https://reviews.llvm.org/D89283
Make it possible to use a relative path in command script import to the
location of the file being sourced. This allows the user to put Python
scripts next to LLDB command files and importing them without having to
specify an absolute path.
To enable this behavior pass `-c` to `command script import`. The
argument can only be used when sourcing the command from a file.
rdar://68310384
Differential revision: https://reviews.llvm.org/D89334
For performance reasons the reproducers don't copy the files captured by
the file collector eagerly, but wait until the reproducer needs to be
generated.
This is a problematic when LLDB crashes and we have to do all this
signal-unsafe work in the signal handler. This patch uses a similar
trick to clang, which has the driver invoke a new cc1 instance to do all
this work out-of-process.
This patch moves the writing of the mapping file as well as copying over
the reproducers into a separate process spawned when lldb crashes.
Differential revision: https://reviews.llvm.org/D89600
Depends on D88841
As per the discussion in the RFC, we'll implement both
thread trace dump [instructions | functions]
This is the first step in implementing the "instructions" dumping command.
It includes:
- A minimal ProcessTrace plugin for representing processes from a trace file. I noticed that it was a required step to mimic how core-based processes are initialized, e.g. ProcessElfCore and ProcessMinidump. I haven't had the need to create ThreadTrace yet, though. So far HistoryThread seems good enough.
- The command handling itself in CommandObjectThread, which outputs a placeholder text instead of the actual instructions. I'll do that part in the next diff.
- Tests
{F13132325}
Differential Revision: https://reviews.llvm.org/D88769
With the feedback I was getting in different diffs, I realized that splitting the parsing logic into two classes was not easy to deal with. I do see value in doing that, but I'd rather leave that as a refactor after most of the intel-pt logic is in place. Thus, I'm merging the common parser into the intel pt one, having thus only one that is fully aware of Intel PT during parsing and object creation.
Besides, based on the feedback in https://reviews.llvm.org/D88769, I'm creating a ThreadIntelPT class that will be able to orchestrate decoding of its own trace and can handle the stop events correctly.
This leaves the TraceIntelPT class as an initialization class that glues together different components. Right now it can initialize a trace session from a json file, and in the future will be able to initialize a trace session from a live process.
Besides, I'm renaming SettingsParser to SessionParser, which I think is a better name, as the json object represents a trace session of possibly many processes.
With the current set of targets, we have the following
- Trace: main interface for dealing with trace sessions
- TraceIntelPT: plugin Trace for dealing with intel pt sessions
- TraceIntelPTSessionParser: a parser of a json trace session file that can create a corresponding TraceIntelPT instance along with Targets, ProcessTraces (to be created in https://reviews.llvm.org/D88769), and ThreadIntelPT threads.
- ProcessTrace: (to be created in https://reviews.llvm.org/D88769) can handle the correct state of the traces as the user traverses the trace. I don't think there'll be a need an intel-pt specific implementation of this class.
- ThreadIntelPT: a thread implementation that can handle the decoding of its own trace file, along with keeping track of the current position the user is looking at when doing reverse debugging.
Differential Revision: https://reviews.llvm.org/D88841
This reverts commit c65627a1fe.
The test immediately after the new invalid symbol test was
failing on Windows. This was because when we called
VirtualQueryEx to get the region info for 0x0,
even if it succeeded we would call GetLastError.
Which must have picked up the last error that was set while
trying to lookup "not_an_address". Which happened to be 2.
("The system cannot find the file specified.")
To fix this only call GetLastError when we know VirtualQueryEx
has failed. (when it returns 0, which we were also checking for anyway)
Also convert memory region to an early return style
to make the logic clearer.
Reviewed By: labath, stella.stamenova
Differential Revision: https://reviews.llvm.org/D88229
This reverts commit f775fe5964.
I fixed a return type error in the original patch that was causing a test failure.
Also added a REQUIRES: python to the shell test so we'll skip this for
people who build lldb w/o Python.
Also added another test for the error printing.
There was a little thinko which meant when stopped in a frame with
debug information but whose CU didn't have any global variables we
report:
no debug info for frame <N>
This patch fixes that error message to say the intended:
no global variables in current compile unit
<rdar://problem/69086361>
This is the first in a series of patches that will adds a new processor trace plug-in to LLDB.
The idea for this first patch to to add the plug-in interface with simple commands for the trace files that can "load" and "dump" the trace information. We can test the functionality and ensure people are happy with the way things are done and how things are organized before moving on to adding more functionality.
Processor trace information can be view in a few different ways:
- post mortem where a trace is saved off that can be viewed later in the debugger
- gathered while a process is running and allow the user to step back in time (with no variables, memory or registers) to see how each thread arrived at where it is currently stopped.
This patch attempts to start with the first solution of loading a trace file after the fact. The idea is that we will use a JSON file to load the trace information. JSON allows us to specify information about the trace like:
- plug-in name in LLDB
- path to trace file
- shared library load information so we can re-create a target and symbolicate the information in the trace
- any other info that the trace plug-in will need to be able to successfully parse the trace information
- cpu type
- version info
- ???
A new "trace" command was added at the top level of the LLDB commmands:
- "trace load"
- "trace dump"
I did this because if we load trace information we don't need to have a process and we might end up creating a new target for the trace information that will become active. If anyone has any input on where this would be better suited, please let me know. Walter Erquinigo will end up filling in the Intel PT specific plug-in so that it works and is tested once we can agree that the direction of this patch is the correct one, so please feel free to chime in with ideas on comments!
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D85705
Update the some examples in the help string for `breakpoint command add`.
Python breakpoint commands have different output than what's shown in the help string.
Notes:
* Removed an example containing an inner function, as it seems more about a Python technique than about `command script add`
* Updated `print x` to `print(x)` to be python 2/3 agnostic
Differential Revision: https://reviews.llvm.org/D87807
Previously when <addr> in "memory region <addr>" didn't
parse correctly, we'd print an error then also ask lldb-server
for a region containing LLDB_INVALID_ADDRESS.
(lldb) memory region not_an_address
error: invalid address argument "not_an_address"...
error: Server returned invalid range
Only send the command to lldb-server if the address
parsed correctly.
(lldb) memory region not_an_address
error: invalid address argument "not_an_address"...
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87694
Make it possible to run the script command with a different language
than currently selected.
$ ./bin/lldb -l python
(lldb) script -l lua
>>> io.stdout:write("Hello, World!\n")
Hello, World!
When passing the language option and a raw command, you need to separate
the flag from the script code with --.
$ ./bin/lldb -l python
(lldb) script -l lua -- io.stdout:write("Hello, World!\n")
Hello, World!
Differential revision: https://reviews.llvm.org/D86996
Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
This patch adds the ability to use a custom interpreter with the
`platform shell` command. If the user set the `-s|--shell` option
with the path to a binary, lldb passes it down to the platform's
`RunShellProcess` method and set it as the shell to use in
`ProcessLaunchInfo to run commands.
Note that not all the Platforms support running shell commands with
custom interpreters (i.e. RemoteGDBServer is only expected to use the
default shell).
This patch also makes some refactoring and cleanups, like swapping
CString for StringRef when possible and updating `SBPlatformShellCommand`
with new methods and a new constructor.
rdar://67759256
Differential Revision: https://reviews.llvm.org/D86667
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Move the CommandObjectScript and CommandObjectRegexCommand under
Commands where all the other CommandObject implementations live.
Although neither implementations currently use the TableGen-generated
CommandOptions.inc, this move would have been necessary anyway if they
were to in the future.
Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
1. Added a dedicated completion to class `CommandObjectTypeFormatterDelete`
which can be used by these commands: `type filter/format/summary/synthetic delete`;
2. Added a related test case.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D84142
Update the "image show-unwind" command output to show if the function
being shown is listed as a user-setting or platform trap handler.
Update the individual UnwindPlan dumps to show whether the unwind plan
is registered as a trap handler.
When replaying a reproducer captured from a core file, we always use
dsymForUUID for the kernel binary. When enabled, we also use it to find
kexts. Since these files are already contained in the reproducer,
there's no reason to call out to an external tool. If the tool returns a
different result, e.g. because the dSYM got garbage collected, it will
break reproducer replay. The SymbolFileProvider solves the issue by
mapping UUIDs to module and symbol paths in the reproducer.
Differential revision: https://reviews.llvm.org/D86389
Dave Lee