preserved) in the ABI.
Realistically lldb isn't able to track register saves of any of
the neon regs right now so we should probably mark all of the
regs as unavailable when you're not on stack frame 0...
<rdar://problem/19115127>
llvm-svn: 223174
Summary:
Taking advantage of the new 'CFAIsRegisterDereferenced' CFA register type, add
full stack unwind support to the PowerPC/PowerPC64 ABI. Also, add a new
register set for powerpc32-on-64, so the register sizes are correct. This also
requires modifying the ProcessMonitor to add support for non-uintptr_t-sized
register values.
Reviewers: jasonmolenda, emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6183
llvm-svn: 221789
Summary:
Ed Maste found some problems with the commit in D5988. Address most of these.
While here, also add floating point return handling. This doesn't handle
128-bit long double yet. Since I don't have any system that uses it, I don't
currently have plans to implement it.
Reviewers: emaste
Reviewed By: emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6049
llvm-svn: 220963
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
detct unwind loops but there was a code path through there (using
architecture default unwind plans) that didn't do the check, and
could end up with an infinite loop unwind. Move that code into a
separate method and call it from both places where it is needed.
Also remove the use of ABI::FunctionCallsChangeCFA in that check.
I thought about it a lot and none of the architecutres that we're
supporting today can have a looping CFA.
Since the unwinder isn't using ABI::FunctionCallsChangeCFA() and
ABI::StackUsesFrames(), and the unwinder was the only reason
those methods exists, I removed them from the ABI and all its
plugins.
<rdar://problem/17364005>
llvm-svn: 216992
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
Replace adhoc inline implementation of llvm::array_lengthof in favour of the
implementation in LLVM. This is simply a cleanup change, no functional change
intended.
llvm-svn: 211868
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
read during materialization. First of all, report
if we can't read the data for some reason. Second,
consult the ValueObject's error and report that if
there's some problem.
<rdar://problem/16074201>
llvm-svn: 202552
because there are too many trap handlers that will have an improperly aligned caller sp
and this will cause the unwinder to stop too early.
llvm-svn: 201637
This was primarily working around problems where we weren't able
to identify trap handlers for different environments -- but instead,
I'm working to make it easier to specify those trap handler function
names.
llvm-svn: 201366
They were enforcing 16-byte alignment on stack frames for Darwin x86 programs.
But we've found that trap handlers typically don't have the stack pointer
aligned correctly when a trap happens and lldb wasn't backtracing all
the way through. This method is only used as a safety guard to prevent
lldb's unwinder from using a bogus address as a stack frame - we'll still
enforce word-size alignment on stack frames so that should be fine.
Also rolled back akaylor's changes from August 2013 in r188952 which changed
the i386 ABI plugin to relax the CallFrameAddressIsValid offsets for non-Darwin
targets where only 4-byte alignment is enforced. Now Darwin is the same as
those environments.
<rdar://problem/15982682>
llvm-svn: 201292
llvm::ArrayRef of arguments rather than taking
a fixed number of possibly-NULL pointers to
arguments.
Also changed ClangFunction::GetThreadPlanToCallFunction
to take the address of the argument struct by value
instead of by reference, since it doesn't actually
modify the value passed into it.
llvm-svn: 194232
Instead of looking up registers by name, we use the generic ID when we can.
Also added code that creates an extra frame when running expressions by pushing the current PC and FP and then hooking up the FP backchain. This code is "#if 0" out for now until we can pair it with unwinder fixes.
llvm-svn: 194035
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that it
wasn't working out like I intended. Instead I'll try sticking with
the single StackFrame class -- there's too much code duplication to
make a more complicated class hierarchy sensible I think.
llvm-svn: 193983
defines a protocol that all subclasses will implement. StackFrame
is currently the only subclass and the methods that Frame vends are
nearly identical to StackFrame's old methods.
Update all callers to use Frame*/Frame& instead of pointers to
StackFrames.
This is almost entirely a mechanical change that touches a lot of
the code base so I'm committing it alone. No new functionality is
added with this patch, no new subclasses of Frame exist yet.
I'll probably need to tweak some of the separation, possibly moving
some of StackFrame's methods up in to Frame, but this is a good
starting point.
<rdar://problem/15314068>
llvm-svn: 193907
been down for months and is likely no longer supported. This was
the most stable-looking link I could find for the current (0.99.6)
version of the ABI doc.
llvm-svn: 187087
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
llvm-svn: 186130
<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
llvm-svn: 181631
- Adds unique enums for ymm registers to the ABI and the POSIX register context.
- Reworks the register context data structures to support a union of FXSAVE and XSAVE
--- Allows the same code base to deal with the FPU independent of the availability of AVX.
- Determine if AVX is supported by attempting to read XSAVE using ptrace.
--- Support an extended register set for avx registers if available.
- Provide a mechanism to assemble/parse register halves into a single ymm buffer for use with RegisterValue.
--- Reworked Read/WriteRegister routines to read/write/parse ymm registers.
Adds tests for ymm register write with read-back, and expressions involving ymm registers.
- Tests vary depending on the availability of an avx register set.
Thanks to Daniel and Matt for their reviews.
llvm-svn: 180572
Now we can:
1 - see the return value for functions that return types that use the "ext_vector_size"
2 - dump values that use the vector attributes ("expr $ymm0")
3 - modified the DWARF parser to correctly parse GNU vector types from the DWARF by turning them into clang::Type::ExtVector types instead of just standard arrays
llvm-svn: 178924
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
- generate-vers.pl has to be called by cmake to generate the version number
- parallel builds not yet supported; dependency on clang must be explicitly specified
Tested on Linux.
- Building on Mac will require code-signing logic to be implemented.
- Building on Windows will require OS-detection logic and some selective directory inclusion
Thanks to Carlo Kok (who originally prepared these CMakefiles for Windows) and Ben Langmuir
who ported them to Linux!
llvm-svn: 175795
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
I filed this to track the fix:
<rdar://problem/12817918> Recent i386 ABI changes break the i386 test suite because stack backtracing is busted when stopped in trampolines
llvm-svn: 169409
these are the *non-volatile* registers on Darwin/i386, not the
volatile registers.
Recognize the sp, pc, fp generic reg names as well.
llvm-svn: 169316
Full UnwindPlan is trying to do an impossible unwind; in that case
invalidate the Full UnwindPlan and replace it with the architecture
default unwind plan.
This is a scenario that happens occasionally with arm unwinds in
particular; the instruction analysis based full unwindplan can
mis-parse the functions and the stack walk stops prematurely. Now
we can do a simpleminded frame-chain walk to find the caller frame
and continue the unwind. It's not ideal but given the complicated
nature of analyzing the arm functions, and the lack of eh_frame
information on iOS, it is a distinct improvement and fixes some
long-standing problems with the unwinder on that platform.
This is fixing <rdar://problem/12091421>. I may re-use this
invalidate feature in the future if I can identify other cases where
the full unwindplan's unwind information is clearly incorrect.
This checkin also includes some cleanup for the volatile register
definition in the arm ABI plugin for <rdar://problem/10652166>
although work remains to be done for that bug.
llvm-svn: 166757
must push something on the stack for a function call or not. In
x86, the stack pointer is decremented when the caller's pc is saved
on the stack. In arm, the stack pointer and frame pointer don't
necessarily have to change for a function call, although most
functions need to use some stack space during their execution.
Use this information in the RegisterContextLLDB to detect invalid
unwind scenarios more accurately.
<rdar://problem/12348574>
llvm-svn: 166005
Added new API to lldb::SBTypeMember for bitfields:
bool SBTypeMember::IsBitfield();
uint32_t SBTypeMember::GetBitfieldSizeInBits();
Also added new properties for easy access. Now SBTypeMember objects in python have a "fields" property for all type fields, "bases" for all direct bases, "vbases" for all virtual base classes and "members" for a combo of all three organized by bit offset. They all return a python list() of SBTypeMember objects. Usage:
(lldb) script
>>> t = lldb.target.FindFirstType("my_type")
>>> for field in t.fields:
... print field
>>> for vbase in t.vbases:
... print vbase
>>> for base in t.bases:
... print base
>>> for member in t.members:
... print member
Also added new "is_bitfield" property to the SBTypeMember objects that will return the result of SBTypeMember::IsBitfield(), and "bitfield_bit_size" which will return the result of SBTypeMember::GetBitfieldSizeInBits();
I also fixed "SBTypeMember::GetOffsetInBytes()" to return the correct byte offset.
llvm-svn: 161091
a shared pointer to ease some memory management issues with a patch
I'm working on.
The main complication with using SPs for these objects is that most
methods that build up an UnwindPlan will construct a Row to a given
instruction point in a function, then add additional regsaves in
the next instruction point to that row and push it again. A little
care is needed to not mutate the previous instruction point's Row
once these are switched to being held behing shared pointers.
llvm-svn: 160214
a bit -- we're creating the UnwindPlan here, we can set the register set to
whatever is convenient for us, no need to handle different register sets.
A handful of small comment fixes I noticed while reading through the code.
llvm-svn: 159924
Switch over to the "*-apple-macosx" for desktop and "*-apple-ios" for iOS triples.
Also make the selection process for auto selecting platforms based off of an arch much better.
llvm-svn: 156354
Initial step -- infrastructure change -- to fix the bug. Change the RegisterInfo data structure
to contain two additional fields (uint32_t *value_rges and uint32_t *invalidate_regs) to facilitate
architectures which have register mapping.
Update all existing RegsiterInfo arrays to have two extra NULL's (the additional fields) in each row,
GDBRemoteRegisterContext.cpp is modified to add d0-d15 and q0-q15 register info entries which take
advantage of the value_regs field to specify the containment relationship:
d0 -> (s0, s1)
...
d15 -> (s30, s31)
q0 -> (d0, d1)
...
q15 -> (d30, d31)
llvm-svn: 151686
objects for the backlink to the lldb_private::Process. The issues we were
running into before was someone was holding onto a shared pointer to a
lldb_private::Thread for too long, and the lldb_private::Process parent object
would get destroyed and the lldb_private::Thread had a "Process &m_process"
member which would just treat whatever memory that used to be a Process as a
valid Process. This was mostly happening for lldb_private::StackFrame objects
that had a member like "Thread &m_thread". So this completes the internal
strong/weak changes.
Documented the ExecutionContext and ExecutionContextRef classes so that our
LLDB developers can understand when and where to use ExecutionContext and
ExecutionContextRef objects.
llvm-svn: 151009
it was checked in as:
virtual bool ABI::FixCodeAddress (lldb::addr_t pc);
when it should have been:
virtual lldb::addr_t ABI::FixCodeAddress (lldb::addr_t pc);
llvm-svn: 147790
Fixed an ARM backtracing issue where if the previous frame was a thumb
function and it was a tail call so that the current frame returned to
an address that would fall into the next function, we would use the
next function as the basis for how we unwound the previous frame's
registers and of course get things wrong. We now fix the PC code
address using the current ABI plug-in, and the ARM ABI plug-in has
been modified to correctly fix the code address. So when we do the
symbol context lookup, instead of taking an address like 0x1001 and
decrementing 1, and looking up the symbol context for a frame, we
now correctly fix 0x1001 to 0x1000, then decrement that by 1 to
get the correct symbol context.
I added a bunch more logging to "log enable lldb uwnind" to help
us in the future. We now log the PC, FP and SP (if they are available),
and we also dump the "active_row" that we find for unwinding a frame.
llvm-svn: 147747
Switch from GetReturnValue, which was hardly ever used, to GetReturnValueObject
which is much more convenient.
Return the "return value object" as a persistent variable if requested.
llvm-svn: 147157
UnwindPlan for unwinding from the first instruction of an otherwise
unknown function call (GetUnwindPlanArchitectureDefaultAtFunctionEntry()).
Update RegisterContextLLDB::GetFullUnwindPlanForFrame() to detect the
case of a frame 0 at address 0x0 which indicates that we jumped through
a NULL function pointer. Use the ABI's FunctionEntryUnwindPlan to
find the caller frame.
These changes make it so lldb can identify the calling frame correctly
in code like
int main ()
{
void (*f)(void) = 0;
f();
}
llvm-svn: 139760
plug-ins are add on plug-ins for the lldb_private::Process class that can add
thread contexts that are read from memory. It is common in kernels to have
a lot of threads that are not currently executing on any cores (JTAG debugging
also follows this sort of thing) and are context switched out whose state is
stored in memory data structures. Clients can now subclass the OperatingSystem
plug-ins and then make sure their Create functions correcltly only enable
themselves when the right binary/target triple are being debugged. The
operating system plug-ins get a chance to attach themselves to processes just
after launching or attaching and are given a lldb_private::Process object
pointer which can be inspected to see if the main executable, target triple,
or any shared libraries match a case where the OS plug-in should be used.
Currently the OS plug-ins can create new threads, define the register contexts
for these threads (which can all be different if desired), and populate and
manage the thread info (stop reason, registers in the register context) as
the debug session goes on.
llvm-svn: 138228
virtual bool
ABI::StackUsesFrames () = 0;
Should return true if your ABI uses frames when doing stack backtraces. This
means a frame pointer is used that points to the previous stack frame in some
way or another.
virtual bool
ABI::CallFrameAddressIsValid (lldb::addr_t cfa) = 0;
Should take a look at a call frame address (CFA) which is just the stack
pointer value upon entry to a function. ABIs usually impose alignment
restrictions (4, 8 or 16 byte aligned), and zero is usually not allowed.
This function should return true if "cfa" is valid call frame address for
the ABI, and false otherwise. This is used by the generic stack frame unwinding
code to help determine when a stack ends.
virtual bool
ABI::CodeAddressIsValid (lldb::addr_t pc) = 0;
Validates a possible PC value and returns true if an opcode can be at "pc".
Some ABIs or architectures have fixed width instructions and must be aligned
to a 2 or 4 byte boundary. "pc" can be an opcode or a callable address which
means the load address might be decorated with extra bits (such as bit zero
to indicate a thumb function call for ARM targets), so take this into account
when returning true or false. The address should also be validated to ensure
it is a valid address for the address size of the inferior process. 32 bit
targets should make sure the address is less than UINT32_MAX.
Modified UnwindLLDB to use the new ABI functions to help it properly terminate
stacks.
Modified the mach-o function that extracts dependent files to not resolve the
path as the paths inside a binary might not match those on the current
host system.
llvm-svn: 132021
of duplicated code from appearing all over LLDB:
lldb::addr_t
Process::ReadPointerFromMemory (lldb::addr_t vm_addr, Error &error);
bool
Process::WritePointerToMemory (lldb::addr_t vm_addr, lldb::addr_t ptr_value, Error &error);
size_t
Process::ReadScalarIntegerFromMemory (lldb::addr_t addr, uint32_t byte_size, bool is_signed, Scalar &scalar, Error &error);
size_t
Process::WriteScalarToMemory (lldb::addr_t vm_addr, const Scalar &scalar, uint32_t size, Error &error);
in lldb_private::Process the following functions were renamed:
From:
uint64_t
Process::ReadUnsignedInteger (lldb::addr_t load_addr,
size_t byte_size,
Error &error);
To:
uint64_t
Process::ReadUnsignedIntegerFromMemory (lldb::addr_t load_addr,
size_t byte_size,
uint64_t fail_value,
Error &error);
Cleaned up a lot of code that was manually doing what the above functions do
to use the functions listed above.
Added the ability to get a scalar value as a buffer that can be written down
to a process (byte swapping the Scalar value if needed):
uint32_t
Scalar::GetAsMemoryData (void *dst,
uint32_t dst_len,
lldb::ByteOrder dst_byte_order,
Error &error) const;
The "dst_len" can be smaller that the size of the scalar and the least
significant bytes will be written. "dst_len" can also be larger and the
most significant bytes will be padded with zeroes.
Centralized the code that adds or removes address bits for callable and opcode
addresses into lldb_private::Target:
lldb::addr_t
Target::GetCallableLoadAddress (lldb::addr_t load_addr, AddressClass addr_class) const;
lldb::addr_t
Target::GetOpcodeLoadAddress (lldb::addr_t load_addr, AddressClass addr_class) const;
All necessary lldb_private::Address functions now use the target versions so
changes should only need to happen in one place if anything needs updating.
Fixed up a lot of places that were calling :
addr_t
Address::GetLoadAddress(Target*);
to call the Address::GetCallableLoadAddress() or Address::GetOpcodeLoadAddress()
as needed. There were many places in the breakpoint code where things could
go wrong for ARM if these weren't used.
llvm-svn: 131878
and set the address as an opcode address or as a callable address. This is
needed in various places in the thread plans to make sure that addresses that
might be found in symbols or runtime might already have extra bits set (ARM/Thumb).
The new functions are:
bool
Address::SetCallableLoadAddress (lldb::addr_t load_addr, Target *target);
bool
Address::SetOpcodeLoadAddress (lldb::addr_t load_addr, Target *target);
SetCallableLoadAddress will initialize a section offset address if it can,
and if so it might possibly set some bits in the address to make the address
callable (bit zero might get set for ARM for Thumb functions).
SetOpcodeLoadAddress will initialize a section offset address using the
specified target and it will strip any special address bits if needed
depending on the target.
Fixed the ABIMacOSX_arm::GetArgumentValues() function to require arguments
1-4 to be in the needed registers (previously this would incorrectly fallback
to the stack) and return false if unable to get the register values. The
function was also modified to first look for the generic argument registers
and then fall back to finding the registers by name.
Fixed the objective trampoline handler to use the new Address::SetOpcodeLoadAddress
function when needed to avoid address mismatches when trying to complete
steps into objective C methods. Make similar fixes inside the
AppleThreadPlanStepThroughObjCTrampoline::ShouldStop() function.
Modified ProcessGDBRemote::BuildDynamicRegisterInfo(...) to be able to deal with
the new generic argument registers.
Modified RNBRemote::HandlePacket_qRegisterInfo() to handle the new generic
argument registers on the debugserver side.
Modified DNBArchMachARM::NumSupportedHardwareBreakpoints() to be able to
detect how many hardware breakpoint registers there are using a darwin sysctl.
Did the same for hardware watchpoints in
DNBArchMachARM::NumSupportedHardwareWatchpoints().
llvm-svn: 131834
types.
Added the abilty to set a RegisterValue type via accessor and enum.
Added the ability to read arguments for a function for ARM if you are on the
first instruction in ABIMacOSX_arm.
Fixed an issue where a file descriptor becoming invalid could cause an
inifnite loop spin in the libedit thread.
llvm-svn: 131610
addr_t
Address::GetCallableLoadAddress (Target *target) const;
This will resolve the load address in the Address object and optionally
decorate the address up to be able to be called. For all non ARM targets, this
just essentially returns the result of "Address::GetLoadAddress (target)". But
for ARM targets, it checks if the address is Thumb, and if so, it returns
an address with bit zero set to indicate a mode switch to Thumb. This is how
we need function pointers to be for return addresses and when resolving
function addresses for the JIT. It is also nice to centralize this in one spot
to avoid having multiple copies of this code.
llvm-svn: 131588
bool
Address::SetLoadAddress (lldb::addr_t load_addr, Target *target);
Added an == and != operator to RegisterValue.
Modified the ThreadPlanTracer to use RegisterValue objects to store the
register values when single stepping. Also modified the output to be a bit
less wide.
Fixed the ABIMacOSX_arm to not overwrite stuff on the stack. Also made the
trivial function call be able to set the ARM/Thumbness of the target
correctly, and also sets the return value ARM/Thumbness.
Fixed the encoding on the arm s0-s31 and d16 - d31 registers when the default
register set from a standard GDB server register sets.
llvm-svn: 131517
thread plan. In order to get the return value, you can call:
void
ThreadPlanCallFunction::RequestReturnValue (lldb::ValueSP &return_value_sp);
This registers a shared pointer to a return value that will get filled in if
everything goes well. After the thread plan is run the return value will be
extracted for you.
Added an ifdef to be able to switch between the LLVM MCJIT and the standand JIT.
We currently have the standard JIT selected because we have some work to do to
get the MCJIT fuctioning properly.
Added the ability to call functions with 6 argument in the x86_64 ABI.
Added the ability for GDBRemoteCommunicationClient to detect if the allocate
and deallocate memory packets are supported and to not call allocate memory
("_M") or deallocate ("_m") if we find they aren't supported.
Modified the ProcessGDBRemote::DoAllocateMemory(...) and ProcessGDBRemote::DoDeallocateMemory(...)
to be able to deal with the allocate and deallocate memory packets not being
supported. If they are not supported, ProcessGDBRemote will switch to calling
"mmap" and "munmap" to allocate and deallocate memory instead using our
trivial function call support.
Modified the "void ProcessGDBRemote::DidLaunchOrAttach()" to correctly ignore
the qHostInfo triple information if any was specified in the target. Currently
if the target only specifies an architecture when creating the target:
(lldb) target create --arch i386 a.out
Then the vendor, os and environemnt will be adopted by the target.
If the target was created with any triple that specifies more than the arch:
(lldb) target create --arch i386-unknown-unknown a.out
Then the target will maintain its triple and not adopt any new values. This
can be used to help force bare board debugging where the dynamic loader for
static files will get used and users can then use "target modules load ..."
to set addressses for any files that are desired.
Added back some convenience functions to the lldb_private::RegisterContext class
for writing registers with unsigned values. Also made all RegisterContext
constructors explicit to make sure we know when an integer is being converted
to a RegisterValue.
llvm-svn: 131370
pointers:
virtual bool
PrepareTrivialCall (Thread &thread,
lldb::addr_t sp,
lldb::addr_t functionAddress,
lldb::addr_t returnAddress,
lldb::addr_t *arg1_ptr,
lldb::addr_t *arg2_ptr,
lldb::addr_t *arg3_ptr) const = 0;
Prior to this it was:
virtual bool
PrepareTrivialCall (Thread &thread,
lldb::addr_t sp,
lldb::addr_t functionAddress,
lldb::addr_t returnAddress,
lldb::addr_t arg,
lldb::addr_t *this_arg,
lldb::addr_t *cmd_arg) const = 0;
This was because the function that called this slowly added more features to
be able to call a C++ member function that might have a "this" pointer, and
then later added "self + cmd" support for objective C. Cleaning this code up
and the code that calls it makes it easier to implement the functions for
new targets.
The MacOSX_arm::PrepareTrivialCall() is now filled in and ready for testing.
llvm-svn: 131221
respective ABI plugins as they were plug-ins that supplied ABI specfic info.
Also hookep up the UnwindAssemblyInstEmulation so that it can generate the
unwind plans for ARM.
Changed the way ABI plug-ins are handed out when you get an instance from
the plug-in manager. They used to return pointers that would be mananged
individually by each client that requested them, but now they are handed out
as shared pointers since there is no state in the ABI objects, they can be
shared.
llvm-svn: 131193
an interface to a local or remote debugging platform. By default each host OS
that supports LLDB should be registering a "default" platform that will be
used unless a new platform is selected. Platforms are responsible for things
such as:
- getting process information by name or by processs ID
- finding platform files. This is useful for remote debugging where there is
an SDK with files that might already or need to be cached for debug access.
- getting a list of platform supported architectures in the exact order they
should be selected. This helps the native x86 platform on MacOSX select the
correct x86_64/i386 slice from universal binaries.
- Connect to remote platforms for remote debugging
- Resolving an executable including finding an executable inside platform
specific bundles (macosx uses .app bundles that contain files) and also
selecting the appropriate slice of universal files for a given platform.
So by default there is always a local platform, but remote platforms can be
connected to. I will soon be adding a new "platform" command that will support
the following commands:
(lldb) platform connect --name machine1 macosx connect://host:port
Connected to "machine1" platform.
(lldb) platform disconnect macosx
This allows LLDB to be well setup to do remote debugging and also once
connected process listing and finding for things like:
(lldb) process attach --name x<TAB>
The currently selected platform plug-in can now auto complete any available
processes that start with "x". The responsibilities for the platform plug-in
will soon grow and expand.
llvm-svn: 127286
now, in addition to cpu type/subtype and architecture flavor, contains:
- byte order (big endian, little endian)
- address size in bytes
- llvm::Triple for true target triple support and for more powerful plug-in
selection.
llvm-svn: 125602
an issue with the way the UnwindLLDB was handing out RegisterContexts: it
was making shared pointers to register contexts and then handing out just
the pointers (which would get put into shared pointers in the thread and
stack frame classes) and cause double free issues. MallocScribble helped to
find these issues after I did some other cleanup. To help avoid any
RegisterContext issue in the future, all code that deals with them now
returns shared pointers to the register contexts so we don't end up with
multiple deletions. Also now that the RegisterContext class doesn't require
a stack frame, we patched a memory leak where a StackFrame object was being
created and leaked.
Made the RegisterContext class not have a pointer to a StackFrame object as
one register context class can be used for N inlined stack frames so there is
not a 1 - 1 mapping. Updates the ExecutionContextScope part of the
RegisterContext class to never return a stack frame to indicate this when it
is asked to recreate the execution context. Now register contexts point to the
concrete frame using a concrete frame index. Concrete frames are all of the
frames that are actually formed on the stack of a thread. These concrete frames
can be turned into one or more user visible frames due to inlining. Each
inlined stack frame has the exact same register context (shared via shared
pointers) as any parent inlined stack frames all the way up to the concrete
frame itself.
So now the stack frames and the register contexts should behave much better.
llvm-svn: 122976
the code to pass the _cmd pointer has been improved, and _cmd
is now set to the value of _cmd for the current context, as
opposed to being simply NULL.
llvm-svn: 121739
access to the members of the Objective-C self object.
The approach we take is to generate the method as a
@category on top of the self object, and to pass the
"self" pointer to it. (_cmd is currently NULL.)
Most changes are in ClangExpressionDeclMap, but the
change that adds support to the ABIs to pass _cmd
touches a fair amount of code.
llvm-svn: 121722
cases when getting the clang type:
- need only a forward declaration
- need a clang type that can be used for layout (members and args/return types)
- need a full clang type
This allows us to partially parse the clang types and be as lazy as possible.
The first case is when we just need to declare a type and we will complete it
later. The forward declaration happens only for class/union/structs and enums.
The layout type allows us to resolve the full clang type _except_ if we have
any modifiers on a pointer or reference (both R and L value). In this case
when we are adding members or function args or return types, we only need to
know how the type will be laid out and we can defer completing the pointee
type until we later need it. The last type means we need a full definition for
the clang type.
Did some renaming of some enumerations to get rid of the old "DC" prefix (which
stands for DebugCore which is no longer around).
Modified the clang namespace support to be almost ready to be fed to the
expression parser. I made a new ClangNamespaceDecl class that can carry around
the AST and the namespace decl so we can copy it into the expression AST. I
modified the symbol vendor and symbol file plug-ins to use this new class.
llvm-svn: 118976
don't crash if we disable logging when some code already has a copy of the
logger. Prior to this fix, logs were handed out as pointers and if they were
held onto while a log got disabled, then it could cause a crash. Now all logs
are handed out as shared pointers so this problem shouldn't happen anymore.
We are also using our new shared pointers that put the shared pointer count
and the object into the same allocation for a tad better performance.
llvm-svn: 118319
adding methods to C++ and objective C classes. In order to make methods, we
need the function prototype which means we need the arguments. Parsing these
could cause a circular reference that caused an assertion.
Added a new typedef for the clang opaque types which are just void pointers:
lldb::clang_type_t. This appears in lldb-types.h.
This was fixed by enabling struct, union, class, and enum types to only get
a forward declaration when we make the clang opaque qual type for these
types. When they need to actually be resolved, lldb_private::Type will call
a new function in the SymbolFile protocol to resolve a clang type when it is
not fully defined (clang::TagDecl::getDefinition() returns NULL). This allows
us to be a lot more lazy when parsing clang types and keeps down the amount
of data that gets parsed into the ASTContext for each module.
Getting the clang type from a "lldb_private::Type" object now takes a boolean
that indicates if a forward declaration is ok:
clang_type_t lldb_private::Type::GetClangType (bool forward_decl_is_ok);
So function prototypes that define parameters that are "const T&" can now just
parse the forward declaration for type 'T' and we avoid circular references in
the type system.
llvm-svn: 115012
for C++ classes. Replaced it with a less hacky approach:
- If an expression is defined in the context of a
method of class A, then that expression is wrapped as
___clang_class::___clang_expr(void*) { ... }
instead of ___clang_expr(void*) { ... }.
- ___clang_class is resolved as the type of the target
of the "this" pointer in the method the expression
is defined in.
- When reporting the type of ___clang_class, a method
with the signature ___clang_expr(void*) is added to
that class, so that Clang doesn't complain about a
method being defined without a corresponding
declaration.
- Whenever the expression gets called, "this" gets
looked up, type-checked, and then passed in as the
first argument.
This required the following changes:
- The ABIs were changed to support passing of the "this"
pointer as part of trivial calls.
- ThreadPlanCallFunction and ClangFunction were changed
to support passing of an optional "this" pointer.
- ClangUserExpression was extended to perform the
wrapping described above.
- ClangASTSource was changed to revert the changes
required by the hack.
- ClangExpressionParser, IRForTarget, and
ClangExpressionDeclMap were changed to handle
different manglings of ___clang_expr flexibly. This
meant no longer searching for a function called
___clang_expr, but rather looking for a function whose
name *contains* ___clang_expr.
- ClangExpressionParser and ClangExpressionDeclMap now
remember whether "this" is required, and know how to
look it up as necessary.
A few inheritance bugs remain, and I'm trying to resolve
these. But it is now possible to use "this" as well as
refer implicitly to member variables, when in the proper
context.
llvm-svn: 114384
The Unwind and RegisterContext subclasses still need
to be finished; none of this code is used by lldb at
this point (unless you call into it by hand).
The ObjectFile class now has an UnwindTable object.
The UnwindTable object has a series of FuncUnwinders
objects (Function Unwinders) -- one for each function
in that ObjectFile we've backtraced through during this
debug session.
The FuncUnwinders object has a few different UnwindPlans.
UnwindPlans are a generic way of describing how to find
the canonical address of a given function's stack frame
(the CFA idea from DWARF/eh_frame) and how to restore the
caller frame's register values, if they have been saved
by this function.
UnwindPlans are created from different sources. One source is the
eh_frame exception handling information generated by the compiler
for unwinding an exception throw. Another source is an assembly
language inspection class (UnwindAssemblyProfiler, uses the Plugin
architecture) which looks at the instructions in the funciton
prologue and describes the stack movements/register saves that are
done.
Two additional types of UnwindPlans that are worth noting are
the "fast" stack UnwindPlan which is useful for making a first
pass over a thread's stack, determining how many stack frames there
are and retrieving the pc and CFA values for each frame (enough
to create StackFrameIDs). Only a minimal set of registers is
recovered during a fast stack walk.
The final UnwindPlan is an architectural default unwind plan.
These are provided by the ArchDefaultUnwindPlan class (which uses
the plugin architecture). When no symbol/function address range can
be found for a given pc value -- when we have no eh_frame information
and when we don't have a start address so we can't examine the assembly
language instrucitons -- we have to make a best guess about how to
unwind. That's when we use the architectural default UnwindPlan.
On x86_64, this would be to assume that rbp is used as a stack pointer
and we can use that to find the caller's frame pointer and pc value.
It's a last-ditch best guess about how to unwind out of a frame.
There are heuristics about when to use one UnwindPlan versues the other --
this will all happen in the still-begin-written UnwindLLDB subclass of
Unwind which runs the UnwindPlans.
llvm-svn: 113581
(i.e., leave the value the same, so that a new
stack frame will be linked to the previous
stack) rather than zeroing out RBP.
This fixes calls to dlopen(), for example, which
does a backtrace to see which image is calling
it.
llvm-svn: 113288
involved watching for the objective C built-in types in DWARF and making sure
when we convert the DWARF types into clang types that we use the appropriate
ASTContext types.
Added a way to find and dump types in lldb (something equivalent to gdb's
"ptype" command):
image lookup --type <TYPENAME>
This only works for looking up types by name and won't work with variables.
It also currently dumps out verbose internal information. I will modify it
to dump more appropriate user level info in my next submission.
Hookup up the "FindTypes()" functions in the SymbolFile and SymbolVendor so
we can lookup types by name in one or more images.
Fixed "image lookup --address <ADDRESS>" to be able to correctly show all
symbol context information, but it will only show this extra information when
the new "--verbose" flag is used.
Updated to latest LLVM to get a few needed fixes.
llvm-svn: 110089
enabled LLVM make style building and made this compile LLDB on Mac OS X. We
can now iterate on this to make the build work on both linux and macosx.
llvm-svn: 108009
Jason Molenda