ProcessGDBRemote plugin layers.
Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.
Differential Revision: https://reviews.llvm.org/D102085
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
Introduce a minimal support for the 32-bit powerpc platform. This
includes support for GPR and FPR registers. I also needed to add
software breakpoint opcode for PPC32/PPC64 (big endian), and to fix
offsets in RegisterInfos_powerpc.h (used only by FreeBSD register
context to be globally unique rather than relative to each struct).
Differential Revision: https://reviews.llvm.org/D95947
Introduce mips64 support to match the legacy FreeBSD plugin. Similarly
to the legacy plugin, the code does not support FPU registers at the
moment. The support for them will be submitted separately as it
requires changes to the register context shared by both plugins.
This also includes software single-stepping support that is moved from
the Linux plugin into a common Utility class. The FreeBSD code also
starts explicitly ignoring EINVAL from PT_CLEARSTEP since this is easier
to implement than checking whether hardware single-stepping were used.
Differential Revision: https://reviews.llvm.org/D95802
Introduce a NativeRegisterContextFreeBSD for 32-bit ARM platform.
This includes support for GPR + VFP registers as exposed by FreeBSD's
ptrace(2) API. Hardware breakpoints or watchpoints are not supported
due to missing kernel support. The code is roughly based on the arm64
context.
It also includes an override for GetSoftwareBreakpointTrapOpcode() based
on the matching code in the PlatformFreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D95696
Introduce arm64 support in the FreeBSDRemote plugin. The code
is roughly based on Linux and reuses the same POSIX RegisterInfos
(but the buffers need to be a few bytes larger due to stricter struct
member alignment in FreeBSD structures -- luckily, they do not affect
the actual member offsets). It supports reading and writing
general-purpose and FPU registers. SVE and hardware watchpoint support
is missing due to the limitations of FreeBSD ptrace(2) API.
Differential Revision: https://reviews.llvm.org/D95297
When a program maps one of its own modules for reading, and then
crashes, breakpad can emit two entries for that module in the
ModuleList. We have logic to identify this case by checking permissions
on mapped memory regions and report just the module with an executable
region. As currently written, though, the check is asymmetric -- the
entry with the executable region must be the second one encountered for
the preference to kick in.
This change makes the logic symmetric, so that the first-encountered
module will similarly be preferred if it has an executable region but
the second-encountered module does not. This happens for example when
the module in question is the executable itself, which breakpad likes to
report first -- we need to ignore the other entry for that module when
we see it later, even though it may be mapped at a lower virtual
address.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D94629
TargetList::CreateTarget automatically adds created target to the list, however,
CommandObjectTargetCreate does some additional preparation after creating a target
and which can fail. The command should remove created target if it failed. Since
the function has many ways to return, scope guard does this work safely.
Changes to the TargetList make target adding and selection more transparent.
Other changes remove unnecessary SetSelectedTarget after CreateTarget.
Differential Revision: https://reviews.llvm.org/D93052
Extract remote debugging logic from PlatformMacOSX and move it into
PlatformRemoteMacOSX so it can benefit from all the logic necessary for
remote debugging.
Until now, remote macOS debugging was treated almost identical to local
macOS debugging. By moving in into its own class, we can have it inherit
from PlatformRemoteDarwinDevice and all the functionality it provides,
such as looking at the correct DeviceSupport directory.
rdar://68167374
Differential revision: https://reviews.llvm.org/D92452
Previously if you did:
$ lldb-server platform --server <...> --min-gdbserver-port 12346
--max-gdbserver-port 12347
(meaning only use port 12346 for gdbservers)
Then tried to launch two gdbservers on the same connection,
the second one would return port 65535. Which is a real port
number but it actually means lldb-server didn't find one it was
allowed to use.
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1919;port:12346;#c0
<...>
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1927;port:65535;#c7
This situation should be an error even if port 65535 does happen
to be available on the current machine.
To fix this make PortMap it's own class within
GDBRemoteCommunicationServerPlatform.
This almost the same as the old typedef but for
GetNextAvailablePort() returning an llvm::Expected.
This means we have to handle not finding a port,
by returning an error packet.
Also add unit tests for this new PortMap class.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91634
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
The Shell/Register tests now rely on the new behavior, and therefore
are run on non-Darwin systems only. The Python (API) test relies
on the legacy behavior, and is run on Darwin only.
Differential Revision: https://reviews.llvm.org/D91504
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
Differential Revision: https://reviews.llvm.org/D91504
The FXSAVE/XSAVE data can have two different layouts on x86_64. When
called as FXSAVE/XSAVE..., the Instruction Pointer and Address Pointer
registers are reported using a 16-bit segment identifier and a 32-bit
offset. When called as FXSAVE64/XSAVE64..., they are reported using
a complete 64-bit offsets instead.
LLDB has historically followed GDB and unconditionally used to assume
the 32-bit layout, with the slight modification of possibly
using a 32-bit segment register (i.e. extending the register into
the reserved 16 upper bits). When the underlying operating system used
FXSAVE64/XSAVE64..., the pointer was split into two halves,
with the upper half repored as the segment registers. While
reconstructing the full address was possible on the user end (and e.g.
the FPU register tests did that), it certainly was not the most
convenient option.
Introduce a two additional 'fip' and 'fdp' registers that overlap
with 'fiseg'/'fioff' and 'foseg'/'foff' respectively, and report
the complete 64-bit address.
Differential Revision: https://reviews.llvm.org/D91497
Use offset-based method to access x86 debug registers. This also
involves adding a test for the correctness of these offsets, and making
GetDR() method of NativeRegisterContextWatchpoint_x86 public to avoid
duplicate code.
Differential Revision: https://reviews.llvm.org/D91268
Use offset-based method to access base x87 FPU registers, using offsets
relative to the position of 'struct FPR', as determined by the location
of first register in it (fctrl). Change m_fpr to use a fixed-size array
matching FXSAVE size (512 bytes). Add unit tests for verifying
RegisterInfo offsets and sizes against the FXSAVE layout.
Differential Revision: https://reviews.llvm.org/D91248
Read and write registers from m_gpr using offsets from RegisterInfo
rather than explicit switch-case. This eliminates a lot of redundant
code, and avoids mistakes such as type mismatches seen recently (wrt
segment registers). The same logic will be extended to other register
sets in the future.
Make m_gpr an uint8_t std::array to ease accesses. Ideally, we could
avoid including <machine/reg.h> entirely in the future and instead
get the correct GPR size from Utility/RegisterContextFreeBSD_* somehow.
While at it, modify register set logic to use an explicit enum with
llvm::Optional<>, making the code cleaner and at the same time enabling
compiler warnings for unhandled sets.
Since now we're fully relying on 'struct GPR' defined
in Utility/RegisterContextFreeBSD_* being entirely in sync with
the system structure, add unit tests to verify the field offsets
and sizes.
Differential Revision: https://reviews.llvm.org/D91216
Buildbot failed on Windows
http://lab.llvm.org:8011/#/builders/83/builds/693
Error: On Windows, std::future can't hold an Expected, as it doesn't have a default
constructor.
Solution: Use std::future<bool> instead of std::future<Expected<T>>
Depends on D89283.
The goal of this packet (jTraceGetSupportedType) is to be able to query the gdb-server for the tracing technology that can work for the current debuggeer, which can make the user experience simpler but allowing the user to simply type
thread trace start
to start tracing the current thread without even telling the debugger to use "intel-pt", for example. Similarly, `thread trace start [args...]` would accept args beloging to the working trace type.
Also, if the user typed
help thread trace start
We could directly show the help information of the trace type that is supported for the target, or mention instead that no tracing is supported, if that's the case.
I added some simple tests, besides, when I ran this on my machine with intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: {"description":"Intel Processor Trace","pluginName":"intel-pt"}
On a machine without intel-pt support, I got
$ process plugin packet send "jTraceSupportedType"
packet: jTraceSupportedType
response: E00;
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D90490
This is essentially a replacement for the PacketUnimplementedError
previously present in the gdb-remote server code.
The reason I am introducing a generic error is because I wanted the
native process classes to be able to signal that they do not support
some functionality. They could not use PacketUnimplementedError as they
are independent of a specific transport protocol. Putting the error
class in the the native process code was also not ideal because the
gdb-remote code is also used for lldb-server's platform mode, which does
not (should not) know how to debug individual processes.
I'm putting it under Utility, as I think it can be generally useful for
notifying about unsupported/unimplemented functionality (and in
particular, for programatically testing whether something is
unsupported).
Differential Revision: https://reviews.llvm.org/D89121
Breakpad creates minidump files that can a module loaded multiple times. We found that when a process mmap's the object file for a library, this can confuse breakpad into creating multiple modules in the module list. This patch fixes the GetFilteredModules() to check the linux maps for permissions and use the one that has execute permissions. Typically when people mmap a file into memory they don't map it as executable. This helps people to correctly load minidump files for post mortem analysis.
Differential Revision: https://reviews.llvm.org/D86375
This patch is a big sed to rename the following variables:
s/PYTHON_LIBRARIES/Python3_LIBRARIES/g
s/PYTHON_INCLUDE_DIRS/Python3_INCLUDE_DIRS/g
s/PYTHON_EXECUTABLE/Python3_EXECUTABLE/g
s/PYTHON_RPATH/Python3_RPATH/g
I've also renamed the CMake module to better express its purpose and for
consistency with FindLuaAndSwig.
Differential revision: https://reviews.llvm.org/D85976
Encountered the following situation: Let we started thread T1 and it hit
breakpoint on B1 location. We suspended T1 and continued the process.
Then we started thread T2 which hit for example the same location B1.
This time in a breakpoint callback we decided not to stop returning
false.
Expected result: process continues (as if T2 did not hit breakpoint) its
workflow with T1 still suspended. Actual result: process do stops (as if
T2 callback returned true).
Solution: We need invalidate StopInfo for threads that was previously
suspended just because something that is already inactive can not be the
reason of stop. Thread::GetPrivateStopInfo() may be appropriate place to
do it, because it gets called (through Thread::GetStopInfo()) every time
before process reports stop and user gets chance to change
m_resume_state again i.e if we see m_resume_state == eStateSuspended
it definitely means it was set during previous stop and it also means
this thread can not be stopped again (cos' it was frozen during
previous stop).
Differential revision: https://reviews.llvm.org/D80112
Summary:
This packet is necessary to make lldb work with the remote-gdb stub in
user mode qemu when running position-independent binaries. It reports
the relative position (load bias) of the loaded executable wrt. the
addresses in the file itself.
Lldb needs to know this information in order to correctly set the load
address of the executable. Normally, lldb would be able to find this out
on its own by following the breadcrumbs in the process auxiliary vector,
but we can't do this here because qemu does not support the
qXfer:auxv:read packet.
This patch does not implement full scope of the qOffsets packet (it only
supports packets with identical code, data and bss offsets), because it
is not fully clear how should the different offsets be handled and I am
not aware of a producer which would make use of this feature (qemu will
always
<https://github.com/qemu/qemu/blob/master/linux-user/elfload.c#L2436>
return the same value for code and data offsets). In fact, even gdb
ignores the offset for the bss sections, and uses the "data" offset
instead. So, until the we need more of this packet, I think it's best
to stick to the simplest solution possible. This patch simply rejects
replies with non-uniform offsets.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74598
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
This has the same behavior as converting std::string_view to
std::string. This is an expensive conversion, so explicit conversions
are helpful for avoiding unneccessary string copies.
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
Summary:
Many of our tests need to initialize certain subsystems/plugins of LLDB such as
`FileSystem` or `HostInfo` by calling their static `Initialize` functions before the
test starts and then calling `::Terminate` after the test is done (in reverse order).
This adds a lot of error-prone boilerplate code to our testing code.
This patch adds a RAII called SubsystemRAII that ensures that we always call
::Initialize and then call ::Terminate after the test is done (and that the Terminate
calls are always in the reverse order of the ::Initialize calls). It also gets rid of
all of the boilerplate that we had for these calls.
Per-fixture initialization is still not very nice with this approach as it would
require some kind of static unique_ptr that gets manually assigned/reseted
from the gtest SetUpTestCase/TearDownTestCase functions. Because of that
I changed all per-fixture setup to now do per-test setup which can be done
by just having the SubsystemRAII as a member of the test fixture. This change doesn't
influence our normal test runtime as LIT anyway runs each test case separately
(and the Initialize/Terminate calls are anyway not very expensive). It will however
make running all tests in a single executable slightly slower.
Reviewers: labath, JDevlieghere, martong, espindola, shafik
Reviewed By: labath
Subscribers: mgorny, rnkovacs, emaste, MaskRay, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71630
The goal of this refactor is to enable ProcessMinidump to take into
account the loaded modules and their sections when computing the
permissions of various ranges of memory, as discussed in D66638.
This patch moves some of the responsibility for computing the ranges
from MinidumpParser into ProcessMinidump. MinidumpParser still does the
parsing, but ProcessMinidump becomes responsible for answering the
actual queries about memory ranges. This will enable it (in a follow-up
patch) to augment the information obtained from the parser with data
obtained from actual object files.
The changes in the actual code are fairly straight-forward and just
involve moving code around. MinidumpParser::GetMemoryRegions is renamed
to BuildMemoryRegions to emphasize that it does no caching. The only new
thing is the additional bool flag returned from this function. This
indicates whether the returned regions describe all memory mapped into
the target process. Data obtained from /proc/maps and the MemoryInfoList
stream is considered to be exhaustive. Data obtained from Memory(64)List
is not. This will be used to determine whether we need to augment the
data or not.
This reshuffle means that it is no longer possible/easy to test some of
this code via unit tests, as constructing a ProcessMinidump instance is
hard. Instead, I update the unit tests to only test the parsing of the
actual data, and test the answering of queries through a lit test using
the "memory region" command. The patch also includes some tweaks to the
MemoryRegion class to make the unit tests easier to write.
Reviewers: amccarth, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D69035
Summary: The types defined for it in LLDB are now redundant with core types.
Reviewers: labath, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68658
llvm-svn: 375243
EXPECT_EQ contains an if-else statement. It also contains some magic to
suppress the dangling else warnings, but it seems that some new
compilers can see through that...
llvm-svn: 374341
Stack unwinding was sometimes failing when trying to unwind stacks in 32 bit ARM. I discovered this was because the EH frame register numbers were not set. This patch fixes this issue and adds a unit test to verify this doesn't regress.
Differential Revision: https://reviews.llvm.org/D68088
llvm-svn: 374246
This patch replaces the hand-rolled JSON emission in StructuredData with
LLVM's JSON library.
Differential revision: https://reviews.llvm.org/D68248
llvm-svn: 373359
To support dumping the reproducer's GDB remote packets, we need the
(de)serialization logic to live in Utility rather than the GDB remote
plugin. This patch renames StreamGDBRemote to GDBRemote and moves the
relevant packet code there.
Its uses in the GDBRemoteCommunicationHistory and the
GDBRemoteCommunicationReplayServer are updated as well.
Differential revision: https://reviews.llvm.org/D67523
llvm-svn: 371907
previously they used a minidump-specific function for this purpose, but
this is no longer needed now that whole of yaml2obj is available as a
library.
llvm-svn: 369379
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368933
Summary:
This is the third patch to improve module loading in a series that started here (where I explain the motivation and solution): D62499
Add functions to read the r_debug location to know where the linked list of loaded libraries are so I can generate the `xfer:libraries-svr4` packet.
I'm also using this function to implement `GetSharedLibraryInfoAddress` that was "not implemented" for linux.
Most of this code was inspired by the current ds2 implementation here: https://github.com/facebook/ds2/blob/master/Sources/Target/POSIX/ELFProcess.cpp.
Reviewers: clayborg, xiaobai, labath
Reviewed By: clayborg, labath
Subscribers: emaste, krytarowski, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62501
llvm-svn: 363458
Summary:
This is the first of a few patches I have to improve the performance of dynamic module loading on Android.
In this first diff I'll describe the context of my main motivation and will then link to it in the other diffs to avoid repeating myself.
## Motivation
I have a few scenarios where opening a specific feature on an Android app takes around 40s when lldb is attached to it. The reason for that is because 40 modules are dynamicly loaded at that point in time and each one of them is taking ~1s.
## The problem
To learn about new modules we have a breakpoint on a linker function that is called twice whenever a module is loaded. One time just before it's loaded (so lldb can check which modules are loaded) and another right after it's loaded (so lldb can check again which ones are loaded and calculate the diference).
It's figuring out which modules are loaded that is taking quite some time. This is currently done by traversing the linked list of loaded shared libraries that the linker maintains in memory. Each item in the linked list requires its own `x` packet sent to the gdb server (this is android so the network also plays a part). In my scenario there are 400+ loaded libraries and even though we read 0x800 worth of bytes at a time we still make ~180 requests that end up taking 150-200ms.
We also do this twice, once before the module is loaded (state = eAdd) and another right after (state = eConsistent) which easly adds up to ~400ms per module.
## A solution
**Implement `xfer:libraries-svr4` in lldb-server:**
I noticed in the code that loads the new modules that it had support for the `xfer:libraries-svr4` packet (added ~4 years ago to support the ds2 debug server) but we didn't support it in lldb-server. This single packet returns an xml list of all the loaded modules by the process. The advantage is that there's no more need to make 180 requests to read the linked list. Additionally this new requests takes around 10ms.
**More efficient usage of the `xfer:libraries-svr4` packet in lldb:**
When `xfer:libraries-svr4` is available the Process class has a `LoadModules` function that requests this packet and then loads or unloads modules based on the current list of loaded modules by the process.
This is the function that is used by the DYLDRendezvous class to get the list of loaded modules before and after the module is loaded. However, this is really not needed since the LoadModules function already loaded or unloaded the modules accordingly. I changed this strategy to call LoadModules only once (after the process has loaded the module).
**Bugs**
I found a few issues in lldb while implementing this and have submitted independent patches for them.
I tried to devide this into multiple logical patches to make it easier to review and discuss.
## Tests
I wanted to put these set of diffs up before having all the tests up and running to start having them reviewed from a techical point of view. I'm also having some trouble making the tests running on linux so I need more time to make that happen.
# This diff
The `xfer` packages follow the same protocol, they are requested with `xfer:<object>:<read|write>:<annex>:<offset,length>` and a return that starts with `l` or `m` depending if the offset and length covers the entire data or not. Before implementing the `xfer:libraries-svr4` I refactored the `xfer:auxv` to generically handle xfer packets so we can easly add new ones.
The overall structure of the function ends up being:
* Parse the packet into its components: object, offset etc.
* Depending on the object do its own logic to generate the data.
* Return the data based on its size, the requested offset and length.
Reviewers: clayborg, xiaobai, labath
Reviewed By: labath
Subscribers: mgorny, krytarowski, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62499
llvm-svn: 362982
Summary:
According to [C128] "Virtual functions should specify exactly one
of `virtual`, `override`, or `final`", I've added override where a
virtual function is overriden but the explicit `override` keyword
was missing. Whenever both `virtual` and `override` were specified,
I removed `virtual`. As C.128 puts it:
> [...] writing more than one of these three is both redundant and
> a potential source of errors.
I anticipate a discussion about whether or not to add `override` to
destructors but I went for it because of an example in [ISOCPP1000].
Let me repeat the comment for you here:
Consider this code:
```
struct Base {
virtual ~Base(){}
};
struct SubClass : Base {
~SubClass() {
std::cout << "It works!\n";
}
};
int main() {
std::unique_ptr<Base> ptr = std::make_unique<SubClass>();
}
```
If for some odd reason somebody removes the `virtual` keyword from the
`Base` struct, the code will no longer print `It works!`. So adding
`override` to destructors actively protects us from accidentally
breaking our code at runtime.
[C128]: https://github.com/isocpp/CppCoreGuidelines/blob/master/CppCoreGuidelines.md#c128-virtual-functions-should-specify-exactly-one-of-virtual-override-or-final
[ISOCPP1000]: https://github.com/isocpp/CppCoreGuidelines/issues/1000#issuecomment-476951555
Reviewers: teemperor, JDevlieghere, davide, shafik
Reviewed By: teemperor
Subscribers: kwk, arphaman, kadircet, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61440
llvm-svn: 359868
The tests reading the untouched module list are now not using any lldb
code (as module list loading lives in llvm now), so they can be removed.
The "filtering" of the module list remains (and probably will remain) an
lldb concept, so I keep those tests, but replace the checked-in binaries
with their yaml equivalents.
The binaries which are no longer referenced by any tests have been
removed.
llvm-svn: 358850
In this patch, I just remove the structure definitions for the
ModuleList stream and the associated parsing code. The rest of the code
is converted to work with the definitions in llvm. NFC.
llvm-svn: 358070
I also update the tests for SystemInfo parsing to use the yaml2minidump
capabilities in llvm instead of relying on checked-in binaries.
llvm-svn: 357896
This patch removes the lower layers of the minidump parsing code from
the MinidumpParser class, and replaces it with the minidump parser in
llvm.
Not all functionality is already avaiable in the llvm class, but it is
enough for us to be able to stop enumerating streams manually, and rely
on the minidump directory parsing code from the llvm class.
This also removes some checked-in binaries which were used to test error
handling in the parser, as the error handling is now done (and tested)
in llvm. Instead I just add one test that ensures we correctly propagate
the errors reported by the llvm parser. The input for this test can be
written in yaml instead of a checked-in binary.
llvm-svn: 357748
remove the Initialize function, move the things that can fail into the
static factory function. The factory function now returns
Expected<Parser> instead of Optional<Parser> so that it can give a
reason why creation failed.
llvm-svn: 354668
The tests were doing two somewhat independent things:
- checking that the registers can be retrieved from the minidump file
- checking that they can be converted into a form suitable for
consumption by lldb
The first thing requires a minidump file (but it's independent of other
lldb structures), while the second one does not require a minidump file
(but it needs lldb register info structures).
Splitting this into two tests gives an opportunity to write more
detailed tests, and allows the two pieces of functionality to be moved
into different packages, if that proves to be necessary.
llvm-svn: 354662
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Each process plug-in can create its own custom commands. I figured it would be nice to be able to dump things from the minidump file from the lldb command line, so I added the start of the some custom commands.
Currently you can dump:
minidump stream directory
all linux specifc streams, most of which are strings
each linux stream individually if desired, or all with --linux
The idea is we can expand the command set to dump more things, search for data in the core file, and much more. This patch gets us started.
Differential Revision: https://reviews.llvm.org/D55727
llvm-svn: 349429
Breakpad creates minidump files that sometimes have:
- linux maps textual content
- no MemoryInfoList
Right now unless the file has a MemoryInfoList we get no region information.
This patch:
- reads and caches the memory region info one time and sorts it for easy subsequent access
- get the region info from the best source in this order:
- linux maps info (if available)
- MemoryInfoList (if available)
- MemoryList or Memory64List
- returns memory region info for the gaps between regions (before the first and after the last)
Differential Revision: https://reviews.llvm.org/D55522
llvm-svn: 349182
This commit added new test inputs, but it did not add them to the cmake
files. This caused the test to fail at runtime.
While in there, I also sorted the list of minidump test inputs.
llvm-svn: 349154
The MinidumpParser::GetFilteredModuleList() code was attempting to iterate through the entire module list and if it found more than one entry for a given module name, it wanted to pick the MinidumpModule with the lowest address. A bug existed where it wasn't doing that due to "exists" variable being inverted. "exists" was set to true if it was inserted, not if it existed. Furthermore, the order of the modules would be modified by sorting all modules from low address to high address (using MinidumpModule::base_of_image). This fix also maintains the original order which means your executable is at index 0 as intended instead of some random shared library.
Tests were added to ensure this functionality doesn't regress.
Differential Revision: https://reviews.llvm.org/D55614
llvm-svn: 349062
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This moves construction of data buffers into the FileSystem class. Like
some of the previous refactorings we don't translate the path yet
because the functionality hasn't been landed in LLVM yet.
Differential revision: https://reviews.llvm.org/D54272
llvm-svn: 346598
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
Corrupted minidumps was leading to unpredictable behavior.
This change adds explicit consistency checks for the minidump early on. The
checks are not comprehensive but they should catch obvious structural violations:
streams with type == 0
duplicate streams (same type)
overlapping streams
truncated minidumps
Another early check is to make sure we actually support the minidump architecture
instead of crashing at a random place deep inside LLDB.
Differential Revision: https://reviews.llvm.org/D49202
llvm-svn: 336918
Summary:
During the previous attempt to generalize the UUID class, it was
suggested that we represent invalid UUIDs as length zero (previously, we
used an all-zero UUID for that). This meant that some valid build-ids
could not be represented (it's possible however unlikely that a checksum of
some file would be zero) and complicated adding support for variable
length build-ids (should a 16-byte empty UUID compare equal to a 20-byte
empty UUID?).
This patch resolves these issues by introducing a canonical
representation for an invalid UUID. The slight complication here is that
some clients (MachO) actually use the all-zero notation to mean "no UUID
has been set". To keep this use case working (while making it very
explicit about which construction semantices are wanted), replaced the
UUID constructors and the SetBytes functions with named factory methods.
- "fromData" creates a UUID from the given data, and it treats all bytes
equally.
- "fromOptionalData" first checks the data contents - if all bytes are
zero, it treats this as an invalid/empty UUID.
Reviewers: clayborg, sas, lemo, davide, espindola
Subscribers: emaste, lldb-commits, arichardson
Differential Revision: https://reviews.llvm.org/D48479
llvm-svn: 335612
Summary:
The llvm version of the enum has the same enumerators, with stlightly
different names, so this is mostly just a search&replace exercise. One
concrete benefit of this is that we can remove the function for
converting between the two enums.
To avoid typing llvm::sys::path::Style::windows everywhere I import the
enum into the FileSpec class, so it can be referenced as
FileSpec::Style::windows.
Reviewers: zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D46753
llvm-svn: 332247
In case we are building with xml enabled, the GetMemoryRegionInfo
function will send extra packets to query te extended memory map, which
the tests were not expecting.
Add an expectation for this to the test. Right now, it's just a basic
one which pretends we don't support the extension, however, it would be
also interesting the add a test which verifies the extension-enabled
case.
I also noticed that the test does a pretty lousy job of validating the
returned memory region info, so I add a couple of extra assertions to
improve that.
llvm-svn: 331374
Summary:
We've had a mismatch in the checksum computation between the sender and
receiver. The sender computed the payload checksum using the wire
encoding of the packet, while the receiver did this after expanding
un-escaping and expanding run-length-encoded sequences. This resulted in
communication breakdown if packets using these feature were sent in the
ack mode.
Normally, this did not cause any issues since the only packet we send in
the ack-mode is the QStartNoAckMode packet, but I ran into this when
debugging the lldb-server tests which (for better or worse) don't use
this mode.
According to the gdb-remote documentation "The two-digit checksum is computed as
the modulo 256 sum of all characters between the leading ‘$’ and the
trailing ‘#’", it seems that our sender is doing the right thing here.
Therefore, I fix the receiver the match the sender behavior and add a
test.
With this bug fixed, we can see that lldb-server is sending a stop-reply
after receiving the "k" in the same way as debugserver does (but we
weren't detecting this because at that point the connection was dead
already). I fix that expectation as well.
Reviewers: clayborg, jasonmolenda
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D44922
llvm-svn: 328693
Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O packet as an unexpected response. Besides generating no output, this causes lldb to get out of sync with future commands because it continues reading O packets from the first command as response to subsequent commands.
This patch handles any O packets during an qRcmd, treating the first non-O packet as the true response.
Preliminary discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013078.html
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D41745
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 322190
The recent UUID cleanups exposed a bug in the parsing code for the
jModulesInfo response, which was passing wrong value for the second
argument to UUID::SetFromStringRef (it passed the length of the string,
whereas the correct value should be the number of decoded bytes we
expect to receive).
This was not picked up by tests, because they test with 16-byte uuids,
for which the function happens to do the right thing even if the length
does not match (if the length does not match, the function does not
update m_num_uuid_bytes member, but that member is already 16 to begin
with).
I fix that and add a test with 20-byte uuid to catch if this regresses.
I have also added more safeguards into the parsing code to fail if we
cannot parse the entire uuid field we recieve. While testing the latter
part, I noticed that the "negative" jModulesInfo tests were succeeding
because we were sending malformed json (and not because the json
contents was invalid), so I make those tests a bit more robuts as well.
llvm-svn: 320985
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Summary:
At present, several gtests in the lldb open source codebase are using
#include statements rooted at $(SOURCE_ROOT)/${LLDB_PROJECT_ROOT}.
This patch cleans up this directory/include structure for both CMake and
Xcode build systems.
rdar://problem/33835795
Reviewers: zturner, jingham, beanz
Reviewed By: beanz
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D36598
llvm-svn: 314849
Summary:
The classes have no dependencies, and they are used both by lldb and
lldb-server, so it makes sense for them to live in the lowest layers.
Reviewers: zturner, jingham
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34746
llvm-svn: 306682
Summary:
Fetching an input file required about five lines of code, and this was
repeated in multiple unit tests, with slight variations. Add a helper
function for doing that into the lldbUtilityMocks module (which I rename
to lldbUtilityHelpers to commemorate the fact it includes more than
mocks)
Reviewers: zturner, eugene
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34683
llvm-svn: 306668
Summary:
This patch implements support for Intel(R) Processor Trace
in lldb server. The changes have support for
starting/stopping and reading the trace data. The code
is only available on Linux versions where the perf
attributes for aux buffers are available.
The patch also consists of Unit tests for testing the
core buffer reading function.
Reviewers: lldb-commits, labath, clayborg, zturner, tberghammer
Reviewed By: labath, clayborg
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D33674
llvm-svn: 306516
Summary:
It had a dependency on StringConvert and file reading code, which is not
in Utility. I've replaced that code by equivalent llvm operations.
I've added a unit test to demonstrate that parsing a file still works.
Reviewers: zturner, jingham
Subscribers: kubamracek, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34625
llvm-svn: 306394
Instead of every test creating a client-server combo, do that in the
SetUp method of the test fixture. This also means that we can rely on
gtest to not run the test if the SetUp method fails and delete the
if(HasFailure) calls.
llvm-svn: 306013
Benjamin Kramer