This patch addresses multiple things:
1) It ensures that const_value is emitted when possible with basic block
sections.
2) It emits location lists such that the labels are always within the
section boundary.
3) It fixes a bug when the parameter is first used in a non-entry block
which is in a different section from the entry block.
Differential Revision: https://reviews.llvm.org/D85085
This patch introduces "DBG_PHI" instructions, a marker of where a PHI
instruction used to be, before PHI elimination. Under the instruction
referencing model, we want to know where every value in the function is
defined -- and a PHI, even if implicit, is such a place.
Just like instruction numbers, we can use this to identify a value to be
used as a variable value, but we don't need to know what instruction
defines that value, for example:
bb1:
DBG_PHI $rax, 1
[... more insts ... ]
bb2:
DBG_INSTR_REF 1, 0, !1234, !DIExpression()
This specifies that on entry to bb1, whatever value is in $rax is known
as value number one -- and the later DBG_INSTR_REF marks the position
where variable !1234 should take on value number one.
PHI locations are stored in MachineFunction for the duration of the
regalloc phase in the DebugPHIPositions map. The map is populated by
PHIElimination, and then flushed back into the instruction stream by
virtregrewriter. A small amount of maintenence is needed in
LiveDebugVariables to account for registers being split, but only for
individual positions, not for entire ranges of blocks.
Differential Revision: https://reviews.llvm.org/D86812
DwarfDebug unconditionally assumes for all call instructions the 0th
operand is the callee operand, which seems to be true for other targets,
but not for WebAssembly. This adds `TargetInstrInfo::getCallOperand`
method whose default implementation returns `getOperand(0)` and makes
WebAssembly overrides it to use its own utility method to get the callee
operand.
This also fixes an existing bug in `WebAssembly::getCalleeOp`, which was
uncovered by this CL.
Reviewed By: dschuff, djtodoro
Differential Revision: https://reviews.llvm.org/D102978
This reapplies c0f3dfb9, which was reverted following the discovery of
crashes on linux kernel and chromium builds - these issues have since
been fixed, allowing this patch to re-land.
This reverts commit 4397b7095d.
Previously APFloat::convertToDouble may be called only for APFloats that
were built using double semantics. Other semantics like single precision
were not allowed although corresponding numbers could be converted to
double without loss of precision. The similar restriction applied to
APFloat::convertToFloat.
With this change any APFloat that can be precisely represented by double
can be handled with convertToDouble. Behavior of convertToFloat was
updated similarly. It make the conversion operations more convenient and
adds support for formats like half and bfloat.
Differential Revision: https://reviews.llvm.org/D102671
- This patch (is one in a series of patches) which introduces HLASM Parser support (for the first parameter of inline asm statements) to LLVM ([[ https://lists.llvm.org/pipermail/llvm-dev/2021-January/147686.html | main RFC here ]])
- This patch in particular introduces HLASM Parser support for Z machine instructions.
- The approach taken here was to subclass `AsmParser`, and make various functions and variables as "protected" wherever appropriate.
- The `HLASMAsmParser` class overrides the `parseStatement` function. Two new private functions `parseAsHLASMLabel` and `parseAsMachineInstruction` are introduced as well.
The general syntax is laid out as follows (more information available in [[ https://www.ibm.com/support/knowledgecenter/SSENW6_1.6.0/com.ibm.hlasm.v1r6.asm/asmr1023.pdf | HLASM V1R6 Language Reference Manual ]] - Chapter 2 - Instruction Statement Format):
```
<TokA><spaces.*><TokB><spaces.*><TokC><spaces.*><TokD>
```
1. TokA is referred to as the Name Entry. This token is optional
2. TokB is referred to as the Operation Entry. This token is mandatory.
3. TokC is referred to as the Operand Entry. This token is mandatory
4. TokD is referred to as the Remarks Entry. This token is optional
- If TokA is provided, then we either parse TokA as a possible comment or as a label (Name Entry), Tok B as the Operation Entry and so on.
- If TokA is not provided (i.e. we have one or more spaces and then the first token), then we will parse the first token (i.e TokB) as a possible Z machine instruction, TokC as the operands to the Z machine instruction and TokD as a possible Remark field
- TokC (Operand Entry), no spaces are allowed between OperandEntries. If a space occurs it is classified as an error.
- TokD if provided is taken as is, and emitted as a comment.
The following additional approach was examined, but not taken:
- Adding custom private only functions to base AsmParser class, and only invoking them for z/OS. While this would eliminate the need for another child class, these private functions would be of non-use to every other target. Similarly, adding any pure virtual functions to the base MCAsmParser class and overriding them in AsmParser would also have the same disadvantage.
Testing:
- This patch doesn't have tests added with it, for the sole reason that MCStreamer Support and Object File support hasn't been added for the z/OS target (yet). Hence, it's not possible generate code outright for the z/OS target. They are in the process of being committed / process of being worked on.
- Any comments / feedback on how to combat this "lack of testing" due to other missing required features is appreciated.
Reviewed By: Kai, uweigand
Differential Revision: https://reviews.llvm.org/D98276
This patch adds support for GCC's -fstack-usage flag. With this flag, a stack
usage file (i.e., .su file) is generated for each input source file. The format
of the stack usage file is also similar to what is used by GCC. For each
function defined in the source file, a line with the following information is
produced in the .su file.
<source_file>:<line_number>:<function_name> <size_in_byte> <static/dynamic>
"Static" means that the function's frame size is static and the size info is an
accurate reflection of the frame size. While "dynamic" means the function's
frame size can only be determined at run-time because the function manipulates
the stack dynamically (e.g., due to variable size objects). The size info only
reflects the size of the fixed size frame objects in this case and therefore is
not a reliable measure of the total frame size.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100509
Since 5de2d189e6 this particular warning
hasn't had the location of the source file containing the inline
assembly.
Fix this by reporting via LLVMContext. Which means that we no longer
have the "instantiated into assembly here" lines but they were going to
point to the start of the inline asm string anyway.
This message is already tested via IR in llvm. However we won't have
the required location info there so I've added a C file test in clang
to cover it.
(though strictly, this is testing llvm code)
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D102244
We want it to be available in analyzes so that we could use the
CodeGen notion in middle-end passes (for example, to check if
a GC may free some particular pointer).
This is a preparatory patch that simply moves the files around.
Note: if this causes some build issues, this patch must just be reverted.
Differential Revision: https://reviews.llvm.org/D100557
Reviewed By: reames
Similar to X86 D73230 & 46788a21f9
With this change, we can set dso_local in clang's -fpic -fno-semantic-interposition mode,
for default visibility external linkage non-ifunc-non-COMDAT definitions.
For such dso_local definitions, variable access/taking the address of a
function/calling a function will go through a local alias to avoid GOT/PLT.
Note: the 'S' inline assembly constraint refers to an absolute symbolic address
or a label reference (D46745).
Differential Revision: https://reviews.llvm.org/D101872
Add a new wrapper function addAttribute() for Die.addValue() function,
so we can do some attributes control in one single interface.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D101125
This change enables emitting CFI unwind information for debugging purpose
for targets with MCAsmInfo::ExceptionsType == ExceptionHandling::None.
Currently generating CFI unwind information is entangled with supporting
the exceptions, even when AsmPrinter explicitly recognizes that the unwind
tables are being generated as debug information.
In fact, the unwind information is not generated even if we specify
--force-dwarf-frame-section, unless exceptions are enabled. The LIT test
llvm/test/CodeGen/AMDGPU/debug_frame.ll demonstrates this behavior.
Enable this option for AMDGPU to prepare for future patches which add
complete CFI support.
Reviewed By: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D78778
The comment about how to make use of debugger tuning within DwarfDebug
really belongs inside the DwarfDebug declaration, where it will be
easier to find.
Value only used by metadata can be removed from .addrsig table.
This solves the undefined symbol error when enabling addrsig table on COFF LTO.
Differential Revision: https://reviews.llvm.org/D101512
Summary:
Personality routine could be an alias to another personality routine.
Fix the situation when we compile the file that contains the personality
routine and the file also have functions that need to refer to the
personality routine.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D101401
Functions can have section names set via #pragma or section attributes,
basic block sections should be correctly named for such functions.
With #pragma, the expectation is that all functions in that file are placed
in the same section in the final binary. Basic block sections should be
correctly named with the unique flag set so that the final binary has all the
basic blocks of the function in that named section. This patch fixes the bug
by calling getExplictSectionGlobal when implicit-section-name attribute is set
to make sure the function's basic blocks get the correct section name.
Differential Revision: https://reviews.llvm.org/D101311
In terms of readability, the `enum CFIMoveType` didn't better document what it
intends to convey i.e. the type of CFI section that gets emitted.
Reviewed By: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D76519
The .file directive is changed to only have basename in D36018 for
ELF.
But on AIX, we require the .file directive to also contain the
directory info. This aligns with other AIX compiler like XLC and is
required by some AIX tool like DBX.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D99785
This reverts commit 0ce723cb22.
D76519 was not quite NFC. If we see a CFISection::Debug function before a
CFISection::EH one (-fexceptions -fno-asynchronous-unwind-tables), we may
incorrectly pick CFISection::Debug and emit a `.cfi_sections .debug_frame`.
We should use .eh_frame instead.
This scenario is untested.
https://reviews.llvm.org/D99400 set clang DefaultDebuggerTuning for AIX
to dbx. However, we still need to update the target default so that llc
and other tools will get the same default debuggertuning, and avoid
passing extra options in LTO.
Reviewed By: #powerpc, shchenz, dblaikie
Differential Revision: https://reviews.llvm.org/D101197
In terms of readability, the `enum CFIMoveType` didn't better document what it
intends to convey i.e. the type of CFI section that gets emitted.
Reviewed By: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D76519
The data member 'shouldEmitMoves' is only used in DwarfCFIException::beginFunction()
and 'shouldEmitCFI' in DwarfCFIExceptionBase serves its purpose.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101155
Previous build failures were caused by an error in bitcode reading and
writing for DIArgList metadata, which has been fixed in e5d844b587.
There were also some unnecessary asserts that were being triggered on
certain builds, which have been removed.
This reverts commit dad5caa59e.
Make following function return void:
addLabel()
addSectionLabel()
addSectionDelta()
This aligns with other attributes adding functions.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D101022
This change adds debug information about whether PGO is being used or
not.
Microsoft performance tooling (e.g. xperf, WPA) uses this information to
show whether functions are optimized with PGO or not, as well as whether
PGO information is invalid.
This information is useful for validating whether training scenarios are
providing good coverage of real world scenarios, showing if profile data
is out of date, etc.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D99994
CommandLine.h is indirectly included in ~50% of TUs when building
clang, and VirtualFileSystem.h is large.
(Already remarked by jhenderson on D70769.)
No behavior change.
Differential Revision: https://reviews.llvm.org/D100957
We saw some big compiling time impact after enabling the debug entry value
feature for X86 platform(D73534). Compiling time goes from 900s->1600s with
our testcase. It is caused by allocating/freeing the memory busily.
'using FwdRegWorklist = MapVector<unsigned, SmallVector<FwdRegParamInfo, 2>>;'
The value for this map is vector, and we miss the reference when access the
element. The same happens for `auto CalleesMap = MF->getCallSitesInfo();` which is a DenseMap.
Reviewed by: djtodoro, flychen50
Differential Revision: https://reviews.llvm.org/D100162
Summary: Set the default DwarfInlinedStrings as inlined strings for DBX, due to DBX does not support .dwstr section for now.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D99933
Negative numbers are represented using DW_OP_consts along with signed representation
of the number as the argument.
Test case IR is generated using Fortran front-end.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D99273
Currently needsStackRealignment returns false if canRealignStack returns false.
This means that the behavior of needsStackRealignment does not correspond to
it's name and description; a function might need stack realignment, but if it
is not possible then this function returns false. Furthermore,
needsStackRealignment is not virtual and therefore some backends have made use
of canRealignStack to indicate whether a function needs stack realignment.
This patch attempts to clarify the situation by separating them and introducing
new names:
- shouldRealignStack - true if there is any reason the stack should be
realigned
- canRealignStack - true if we are still able to realign the stack (e.g. we
can still reserve/have reserved a frame pointer)
- hasStackRealignment = shouldRealignStack && canRealignStack (not target
customisable)
Targets can now override shouldRealignStack to indicate that stack realignment
is required.
This change will make it easier in a future change to handle the case where we
need to realign the stack but can't do so (for example when the register
allocator creates an aligned spill after the frame pointer has been
eliminated).
Differential Revision: https://reviews.llvm.org/D98716
Change-Id: Ib9a4d21728bf9d08a545b4365418d3ffe1af4d87
This is needed for Fortran assumed shape arrays whose dimensions are
defined as,
- 'count' is taken from array descriptor passed as parameter by
caller, access from descriptor is defined by type DIExpression.
- 'lowerBound' is defined by callee.
The current alternate way represents using upperBound in place of
count, where upperBound is calculated in callee in a temp variable
using lowerBound and count
Representation with count (DIExpression) is not only clearer as
compared to upperBound (DIVariable) but it has another advantage that
variable count is accessed by being parameter has better chance of
survival at higher optimization level than upperBound being local
variable.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D99335
Empty functions (functions with no real code) are irrelevant for propeller optimizations and their addresses sometimes conflict with other functions which obfuscates the analysis.
This simple change skips the BB address map emission for such functions.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D99395
This patch adds a fallthrough bit to basic block metadata, indicating whether the basic block can fallthrough without taking any branches. The bit will help us avoid an intel LBR bug which results in occasional duplicate entries at the beginning of the LBR stack.
This patch uses `MachineBasicBlock::canFallThrough()` to set the bit. This is not a const method because it eventually calls `TargetInstrInfo::analyzeBranch`, but it calls this function with the default `AllowModify=false`. So we can either make the argument to the `getBBAddrMapMetadata` non-const, or we can use `const_cast` when calling `canFallThrough`. I decide to go with the latter since this is purely due to legacy code, and in general we should not allow the BasicBlock to be mutable during `getBBAddrMapMetadata`.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D96918
Prefer (self-documenting) return values to output parameters (which are
liable to be used).
While here, rename Noop to Nop which is more widely used and improves
consistency with hasEmitNops/setEmitNops/emitNop/etc.
For locally scoped lambdas like this there's no particular benefit to
explicitly listing captures - or avoiding capturing this. Switch to [&]
and make it all easier to maintain.
(& driveby change std::function to llvm::function_ref)
This patch allows DBG_VALUE_LIST instructions to be emitted to DWARF with valid
DW_AT_locations. This change mainly affects DbgEntityHistoryCalculator, which
now tracks multiple registers per value, and DwarfDebug+DwarfExpression, which
can now emit multiple machine locations as part of a DWARF expression.
Differential Revision: https://reviews.llvm.org/D83495
A symbol being redefined as a label is something that can happen as a result of
ordinary input, so it shouldn't cause a fatal error. Also adjust the error
message to match the one you get when a symbol is redefined as a variable.
Differential Revision: https://reviews.llvm.org/D98181
Rewrites test to use correct architecture triple; fixes incorrect
reference in SourceLevelDebugging doc; simplifies `spillReg` behaviour
so as to not be dependent on changes elsewhere in the patch stack.
This reverts commit d2000b45d0.
This patch adds a new instruction that can represent variadic debug values,
DBG_VALUE_VAR. This patch alone covers the addition of the instruction and a set
of basic code changes in MachineInstr and a few adjacent areas, but does not
correctly handle variadic debug values outside of these areas, nor does it
generate them at any point.
The new instruction is similar to the existing DBG_VALUE instruction, with the
following differences: the operands are in a different order, any number of
values may be used in the instruction following the Variable and Expression
operands (these are referred to in code as “debug operands”) and are indexed
from 0 so that getDebugOperand(X) == getOperand(X+2), and the Expression in a
DBG_VALUE_VAR must use the DW_OP_LLVM_arg operator to pass arguments into the
expression.
The new DW_OP_LLVM_arg operator is only valid in expressions appearing in a
DBG_VALUE_VAR; it takes a single argument and pushes the debug operand at the
index given by the argument onto the Expression stack. For example the
sub-expression `DW_OP_LLVM_arg, 0` has the meaning “Push the debug operand at
index 0 onto the expression stack.”
Differential Revision: https://reviews.llvm.org/D82363
The situation with inline asm/MC error reporting is kind of messy at the
moment. The errors from MC layout are not reliably propagated and users
have to specify an inlineasm handler separately to get inlineasm
diagnose. The latter issue is not a correctness issue but could be improved.
* Kill LLVMContext inlineasm diagnose handler and migrate it to use
DiagnoseInfo/DiagnoseHandler.
* Introduce `DiagnoseInfoSrcMgr` to diagnose SourceMgr backed errors. This
covers use cases like inlineasm, MC, and any clients using SourceMgr.
* Move AsmPrinter::SrcMgrDiagInfo and its instance to MCContext. The next step
is to combine MCContext::SrcMgr and MCContext::InlineSrcMgr because in all
use cases, only one of them is used.
* If LLVMContext is available, let MCContext uses LLVMContext's diagnose
handler; if LLVMContext is not available, MCContext uses its own default
diagnose handler which just prints SMDiagnostic.
* Change a few clients(Clang, llc, lldb) to use the new way of reporting.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D97449
remove `Hi` `Lo` argument from `emitDwarfUnitLength`, so we
can make caller of emitDwarfUnitLength easier.
Reviewed By: MaskRay, dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D96409
We may need to do some customization for DWARF unit length in DWARF
section headers for some targets for some code generation path.
For example, for XCOFF in assembly path, AIX assembler does not require
the debug section containing its debug unit length in the header.
Move emitDwarfUnitLength to MCStreamer class so that we can do
customization in different Streamers
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D95932
D94835 added support for WinEH to export public symbols pointing to
basic blocks which are catchret targets for use with Windows CET.
Wasm currently doesn't support public symbols to non-function code
addresses (they get treated like new functions in asm but then don't
lower to object files correctly).
It created them unconditionally for all catchret targets.
This change disables those symbols unless the exceptionHandlingType
is WinEH (since they aren't used with ExceptionHandling::Wasm)
Differential Revision: https://reviews.llvm.org/D96824
This allows the option to affect the LTO output. Module::Max helps to
generate debug info for all modules in the same format.
Differential Revision: https://reviews.llvm.org/D96597
Basic block sections enables function sections implicitly, this is not needed
and is inefficient with "=list" option.
We had basic block sections enable function sections implicitly in clang. This
is particularly inefficient with "=list" option as it places functions that do
not have any basic block sections in separate sections. This causes unnecessary
object file overhead for large applications.
This patch disables this implicit behavior. It only creates function sections
for those functions that require basic block sections.
Further, there was an inconistent behavior with llc as llc was not turning on
function sections by default. This patch makes llc and clang consistent and
tests are added to check the new behavior.
This is the first of two patches and this adds functionality in LLVM to
create a new section for the entry block if function sections is not
enabled.
Differential Revision: https://reviews.llvm.org/D93876
This change introduces support for zero flag ELF section groups to LLVM.
LLVM already supports COMDAT sections, which in ELF are a special type
of ELF section groups. These are generally useful to enable linker GC
where you want a group of sections to always travel together, that is to
be either retained or discarded as a whole, but without the COMDAT
semantics. Other ELF assemblers already support zero flag ELF section
groups and this change helps us reach feature parity.
Differential Revision: https://reviews.llvm.org/D95851
This patch enables AsmPrinter support for complex expression with
entry values. It shouldn't AsmPrinter's call whether these are safe or
not but the pass who introduces the DW_OP_LLVM_entry_value. This patch
on its own has no effect on clang.
Differential Revision: https://reviews.llvm.org/D96559
In the future Windows will enable Control-flow Enforcement Technology (CET aka shadow stacks). To protect the path where the context is updated during exception handling, the binary is required to enumerate valid unwind entrypoints in a dedicated section which is validated when the context is being set during exception handling.
This change allows llvm to generate the section that contains the appropriate symbol references in the form expected by the msvc linker.
This feature is enabled through a new module flag, ehcontguard, which was modelled on the cfguard flag.
The change includes a test that when the module flag is enabled the section is correctly generated.
The set of exception continuation information includes returns from exceptional control flow (catchret in llvm).
In order to collect catchret we:
1) Includes an additional flag on machine basic blocks to indicate that the given block is the target of a catchret operation,
2) Introduces a new machine function pass to insert and collect symbols at the start of each block, and
3) Combines these targets with the other EHCont targets that were already being collected.
Change originally authored by Daniel Frampton <dframpto@microsoft.com>
For more details, see MSVC documentation for `/guard:ehcont`
https://docs.microsoft.com/en-us/cpp/build/reference/guard-enable-eh-continuation-metadata
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D94835
This patch hides the logic for setting the location kind of an entry
value inside the begin/finalize/cancel functions. This way we get rid
the strange workaround that is currently in setLocation().
In the future, this will allow us to set the location kind of the
entry value independently from the location kind of the main
expression.
Differential Revision: https://reviews.llvm.org/D96554
Originally landed in ddc2f1e3fb and reverted in d32deaab4d because of
a Generic test objecting. That was fixed up in 013613964f. Original
landing commit message follows:
[DWARF] Location-less inlined variables should not have DW_TAG_variable
Discussed in this thread:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/148139.html
DwarfDebug::collectEntityInfo accidentally distinguishes between variable
locations that never have a location specified, and variable locations that
have an empty location specified. The latter leads to the creation of an
empty variable referring to the abstract origin.
Fix this by seeking a non-empty location before producing a concrete
entity, to guarantee a DW_AT_location will be produced. Other loops in
collectEntityInfo and endFunctionImpl take care of examining the
retainedNodes collection and ensuring optimised-out variables are created.
Differential Revision: https://reviews.llvm.org/D95617
Maskray has reported a fault with .debug_gnu_pubnames in the comments on
D94976, caused by this patch, reverting to investigate.
This reverts commit 8998f58435.
Backing out this workaround to focus on fixing whatever's wrong with
.debug_gnu_pubnames, I'll revert the cause, (8998f584) in the next commit.
This reverts commit 56fa34ae35.
GNU ld>=2.36 supports mixed SHF_LINK_ORDER and non-SHF_LINK_ORDER sections in an
output section, so we can set SHF_LINK_ORDER if -fbinutils-version=2.36 or above.
If -fno-function-sections or older binutils, drop unique ID for -fno-unique-section-names.
The users can just specify -fbinutils-version=2.36 or above to allow GC with both GNU ld and LLD.
(LLD does not support garbage collection of non-group non-SHF_LINK_ORDER .gcc_except_table sections.)
This matches GCC behavior when the configure-time binutils is new. GNU ld<2.36
did not support mixed SHF_LINK_ORDER and non-SHF_LINK_ORDER sections in an
output section, so we conservatively disable SHF_LINK_ORDER for <2.36.
Previously the code split the string at the first '<', which
incorrectly truncated names like `operator<`.
Differential Revision: https://reviews.llvm.org/D95893
`-flto -gsplit-dwarf -g -O[123]` may create .debug_gnu_pubnames with 0 DIE
offset entries. llvm-dwarfdump -debug-gnu-pubnames/ld.lld --gdb-index errors for that.
```
.section .debug_gnu_pubnames,"",@progbits
.long .LpubNames_end2-.LpubNames_begin2 # Length of Public Names Info
.LpubNames_begin2:
.short 2 # DWARF Version
.long .Lcu_begin2 # Offset of Compilation Unit Info
.long 57 # Compilation Unit Length
.long 0 # DIE offset
.byte 16 # Attributes: TYPE, EXTERNAL
.asciz "absl" # External Name
.long 0 # DIE offset
.byte 16 # Attributes: TYPE, EXTERNAL
.asciz "absl::base_internal" # External Name
.long 0 # End Mark
```
This modified patch avoids redirecting the unit in which a subprogram is
created if type units are enabled -- DIEs were getting children allocated
from different units memory pools. Original commit message:
[DWARF] Create subprogram's DIE in DISubprogram's unit
This is a fix for PR48790. Over in D70350, subprogram DIEs were permitted
to be shared between CUs. However, the creation of a subprogram DIE can be
triggered early, from other CUs. The subprogram definition is then created
in one CU, and when the function is actually emitted children are attached
to the subprogram that expect to be in another CU. This breaks internal CU
references in the children.
Fix this by redirecting the creation of subprogram DIEs in
getOrCreateContextDIE to the CU specified by it's DISubprogram definition.
This ensures that the subprogram DIE is always created in the correct CU.
Differential Revision: https://reviews.llvm.org/D94976
Discussed in this thread:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/148139.html
DwarfDebug::collectEntityInfo accidentally distinguishes between variable
locations that never have a location specified, and variable locations that
have an empty location specified. The latter leads to the creation of an
empty variable referring to the abstract origin.
Fix this by seeking a non-empty location before producing a concrete
entity, to guarantee a DW_AT_location will be produced. Other loops in
collectEntityInfo and endFunctionImpl take care of examining the
retainedNodes collection and ensuring optimised-out variables are created.
Differential Revision: https://reviews.llvm.org/D95617
This reverts commit ef0dcb5063.
This change is causing a lot of compiler crashes inside, sorry I don't have a
small repro/stacktrace with symbols to share right now.
Differential Revision: https://reviews.llvm.org/D95622
Experimental, using non-existent DWARF support to use an expr for the
location involving an addr_index (to compute address + offset so
addresses can be reused in more places).
The global variable debug info had to be deferred until the end of the
module (so bss variables would all be emitted first - so their labels
would have the relevant section). Non-bss variables seemed to not have
their label assigned to a section even at the end of the module, so I
didn't know what to do there.
Also, the hashing code is broken - doesn't know how to hash these
expressions (& isn't hashing anything inside subprograms, which seems
problematic), so for test purposes this change just skips the hash
computation. (GCC's actually overly sensitive in its hash function, it
seems - I'm forgetting the specific case right now - anyway, we might
want to just use the frontend-known file hash and give up on optimistic
.dwo/.dwp reuse)
This is a fix for PR48790. Over in D70350, subprogram DIEs were permitted
to be shared between CUs. However, the creation of a subprogram DIE can be
triggered early, from other CUs. The subprogram definition is then created
in one CU, and when the function is actually emitted children are attached
to the subprogram that expect to be in another CU. This breaks internal CU
references in the children.
Fix this by redirecting the creation of subprogram DIEs in
getOrCreateContextDIE to the CU specified by it's DISubprogram definition.
This ensures that the subprogram DIE is always created in the correct CU.
Differential Revision: https://reviews.llvm.org/D94976
static_cast for uint64_t to unsigned gives a MS VC build warning
for Windows:
warning C4309: 'static_cast': truncation of constant value
Use an explicit cast instead.
Change-Id: I692d335b4913070686a102780c1fb05b893a2f69
Differential Revision: https://reviews.llvm.org/D94592
The size of spill/reload may be unknown for scalable vector types.
When the size is unknown, print it as "Unknown-size" instead of a very
large number.
Differential Revision: https://reviews.llvm.org/D94299
This removes `exnref` type and `br_on_exn` instruction. This is
effectively NFC because most uses of these were already removed in the
previous CLs.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94041
A struct in C passed by value did not get debug information. Such values are currently
lowered to a Wasm local even in -O0 (not to an alloca like on other archs), which becomes
a Target Index operand (TI_LOCAL). The DWARF writing code was not emitting locations
in for TI's specifically if the location is a single range (not a list).
In addition, the ExplicitLocals pass which removes the ARGUMENT pseudo instructions did
not update the associated DBG_VALUEs, and couldn't even find these values since the code
assumed such instructions are adjacent, which is not the case here.
Also fixed asm printing of TIs needed by a test.
Differential Revision: https://reviews.llvm.org/D94140
When using dbg.declare, the debug-info is generated from a list of
locals rather than through DBG_VALUE instructions in the MIR.
This patch is different from D90020 because it emits the DWARF
location expressions from that list of locals directly.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D90044
Given the ability provided by DWARFv5 rnglists to reuse addresses in the
address pool, it can be advantageous to object file size to use range
encodings even when the range could be described by a direct low/high
pc.
Add a flag to allow enabling this in DWARFv5 for the purpose of
experimentation/data gathering.
It might be that it makes sense to enable this functionality by default
for DWARFv5 + Split DWARF at least, where the tradeoff/desire to
optimize for .o file size is more explicit and .o bytes are higher
priority than .dwo bytes.
Current implementation assumes that, each MachineConstantPoolValue takes
up sizeof(MachineConstantPoolValue::Ty) bytes. For PowerPC, we want to
lump all the constants with the same type as one MachineConstantPoolValue
to save the cost that calculate the TOC entry for each const. So, we need
to extend the MachineConstantPoolValue that break this assumption.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D89108
The idea is that the CC1 default for ELF should set dso_local on default
visibility external linkage definitions in the default -mrelocation-model pic
mode (-fpic/-fPIC) to match COFF/Mach-O and make output IR similar.
The refactoring is made available by 2820a2ca3a.
Currently only x86 supports local aliases. We move the decision to the driver.
There are three CC1 states:
* -fsemantic-interposition: make some linkages interposable and make default visibility external linkage definitions dso_preemptable.
* (default): selected if the target supports .Lfoo$local: make default visibility external linkage definitions dso_local
* -fhalf-no-semantic-interposition: if neither option is set or the target does not support .Lfoo$local: like -fno-semantic-interposition but local aliases are not used. So references can be interposed if not optimized out.
Add -fhalf-no-semantic-interposition to a few tests using the half-based semantic interposition behavior.
Currently using DW_OP_implicit_value in fragments produces invalid DWARF
expressions. (Such a case can occur in complex floats, for example.)
This problem manifests itself as a missing DW_OP_piece operation after
the last fragment. This happens because the function for printing
constant float value skips printing the accompanying DWARF expression,
as that would also print DW_OP_stack_value (which is not desirable in
this case). However, this also results in DW_OP_piece being skipped.
The reason that DW_OP_piece is missing only for the last piece is that
the act of printing the next fragment corrects this. However, it does
that for the wrong reason -- the code emitting this DW_OP_piece thinks
that the previous fragment was missing, and so it thinks that it needs
to skip over it in order to be able to print itself.
In a simple scenario this works out, but it's likely that in a more
complex setup (where some pieces are in fact missing), this logic would
go badly wrong. In a simple setup gdb also seems to not mind the fact
that the DW_OP_piece is missing, but it would also likely not handle
more complex use cases.
For this reason, this patch disables the usage of DW_OP_implicit_value
in the frament scenario (we will use DW_OP_const*** instead), until we
figure out the right way to deal with this. This guarantees that we
produce valid expressions, and gdb can handle both kinds of inputs
anyway.
Differential Revision: https://reviews.llvm.org/D92013
The main change is to add a 'IsDecl' field to DIModule so
that when IsDecl is set to true, the debug info entry generated
for the module would be marked as a declaration. That way, the debugger
would look up the definition of the module in the gloabl scope.
Please see the comments in llvm/test/DebugInfo/X86/dimodule.ll
for what the debug info entries would look like.
Differential Revision: https://reviews.llvm.org/D93462
SUMMARY:
In order for the runtime on AIX to find the compact unwind section(EHInfo table),
we would need to set the following on the traceback table:
The 6th byte's longtbtable field to true to signal there is an Extended TB Table Flag.
The Extended TB Table Flag to be 0x08 to signal there is an exception handling info presents.
Emit the offset between ehinfo TC entry and TOC base after all other optional portions of traceback table.
The patch is authored by Jason Liu.
Reviewers: David Tenty, Digger Lin
Differential Revision: https://reviews.llvm.org/D92766
This change implements pseudo probe encoding and emission for CSSPGO. Please see RFC here for more context: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s
Pseudo probes are in the form of intrinsic calls on IR/MIR but they do not turn into any machine instructions. Instead they are emitted into the binary as a piece of data in standalone sections. The probe-specific sections are not needed to be loaded into memory at execution time, thus they do not incur a runtime overhead.
**ELF object emission**
The binary data to emit are organized as two ELF sections, i.e, the `.pseudo_probe_desc` section and the `.pseudo_probe` section. The `.pseudo_probe_desc` section stores a function descriptor for each function and the `.pseudo_probe` section stores the actual probes, each fo which corresponds to an IR basic block or an IR function callsite. A function descriptor is stored as a module-level metadata during the compilation and is serialized into the object file during object emission.
Both the probe descriptors and pseudo probes can be emitted into a separate ELF section per function to leverage the linker for deduplication. A `.pseudo_probe` section shares the same COMDAT group with the function code so that when the function is dead, the probes are dead and disposed too. On the contrary, a `.pseudo_probe_desc` section has its own COMDAT group. This is because even if a function is dead, its probes may be inlined into other functions and its descriptor is still needed by the profile generation tool.
The format of `.pseudo_probe_desc` section looks like:
```
.section .pseudo_probe_desc,"",@progbits
.quad 6309742469962978389 // Func GUID
.quad 4294967295 // Func Hash
.byte 9 // Length of func name
.ascii "_Z5funcAi" // Func name
.quad 7102633082150537521
.quad 138828622701
.byte 12
.ascii "_Z8funcLeafi"
.quad 446061515086924981
.quad 4294967295
.byte 9
.ascii "_Z5funcBi"
.quad -2016976694713209516
.quad 72617220756
.byte 7
.ascii "_Z3fibi"
```
For each `.pseudoprobe` section, the encoded binary data consists of a single function record corresponding to an outlined function (i.e, a function with a code entry in the `.text` section). A function record has the following format :
```
FUNCTION BODY (one for each outlined function present in the text section)
GUID (uint64)
GUID of the function
NPROBES (ULEB128)
Number of probes originating from this function.
NUM_INLINED_FUNCTIONS (ULEB128)
Number of callees inlined into this function, aka number of
first-level inlinees
PROBE RECORDS
A list of NPROBES entries. Each entry contains:
INDEX (ULEB128)
TYPE (uint4)
0 - block probe, 1 - indirect call, 2 - direct call
ATTRIBUTE (uint3)
reserved
ADDRESS_TYPE (uint1)
0 - code address, 1 - address delta
CODE_ADDRESS (uint64 or ULEB128)
code address or address delta, depending on ADDRESS_TYPE
INLINED FUNCTION RECORDS
A list of NUM_INLINED_FUNCTIONS entries describing each of the inlined
callees. Each record contains:
INLINE SITE
GUID of the inlinee (uint64)
ID of the callsite probe (ULEB128)
FUNCTION BODY
A FUNCTION BODY entry describing the inlined function.
```
To support building a context-sensitive profile, probes from inlinees are grouped by their inline contexts. An inline context is logically a call path through which a callee function lands in a caller function. The probe emitter builds an inline tree based on the debug metadata for each outlined function in the form of a trie tree. A tree root is the outlined function. Each tree edge stands for a callsite where inlining happens. Pseudo probes originating from an inlinee function are stored in a tree node and the tree path starting from the root all the way down to the tree node is the inline context of the probes. The emission happens on the whole tree top-down recursively. Probes of a tree node will be emitted altogether with their direct parent edge. Since a pseudo probe corresponds to a real code address, for size savings, the address is encoded as a delta from the previous probe except for the first probe. Variant-sized integer encoding, aka LEB128, is used for address delta and probe index.
**Assembling**
Pseudo probes can be printed as assembly directives alternatively. This allows for good assembly code readability and also provides a view of how optimizations and pseudo probes affect each other, especially helpful for diff time assembly analysis.
A pseudo probe directive has the following operands in order: function GUID, probe index, probe type, probe attributes and inline context. The directive is generated by the compiler and can be parsed by the assembler to form an encoded `.pseudoprobe` section in the object file.
A example assembly looks like:
```
foo2: # @foo2
# %bb.0: # %bb0
pushq %rax
testl %edi, %edi
.pseudoprobe 837061429793323041 1 0 0
je .LBB1_1
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 6 2 0
callq foo
.pseudoprobe 837061429793323041 3 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
.LBB1_1: # %bb1
.pseudoprobe 837061429793323041 5 1 0
callq *%rsi
.pseudoprobe 837061429793323041 2 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
# -- End function
.section .pseudo_probe_desc,"",@progbits
.quad 6699318081062747564
.quad 72617220756
.byte 3
.ascii "foo"
.quad 837061429793323041
.quad 281547593931412
.byte 4
.ascii "foo2"
```
With inlining turned on, the assembly may look different around %bb2 with an inlined probe:
```
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 3 0
.pseudoprobe 6699318081062747564 1 0 @ 837061429793323041:6
.pseudoprobe 837061429793323041 4 0
popq %rax
retq
```
**Disassembling**
We have a disassembling tool (llvm-profgen) that can display disassembly alongside with pseudo probes. So far it only supports ELF executable file.
An example disassembly looks like:
```
00000000002011a0 <foo2>:
2011a0: 50 push rax
2011a1: 85 ff test edi,edi
[Probe]: FUNC: foo2 Index: 1 Type: Block
2011a3: 74 02 je 2011a7 <foo2+0x7>
[Probe]: FUNC: foo2 Index: 3 Type: Block
[Probe]: FUNC: foo2 Index: 4 Type: Block
[Probe]: FUNC: foo Index: 1 Type: Block Inlined: @ foo2:6
2011a5: 58 pop rax
2011a6: c3 ret
[Probe]: FUNC: foo2 Index: 2 Type: Block
2011a7: bf 01 00 00 00 mov edi,0x1
[Probe]: FUNC: foo2 Index: 5 Type: IndirectCall
2011ac: ff d6 call rsi
[Probe]: FUNC: foo2 Index: 4 Type: Block
2011ae: 58 pop rax
2011af: c3 ret
```
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91878
This change implements pseudo probe encoding and emission for CSSPGO. Please see RFC here for more context: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s
Pseudo probes are in the form of intrinsic calls on IR/MIR but they do not turn into any machine instructions. Instead they are emitted into the binary as a piece of data in standalone sections. The probe-specific sections are not needed to be loaded into memory at execution time, thus they do not incur a runtime overhead.
**ELF object emission**
The binary data to emit are organized as two ELF sections, i.e, the `.pseudo_probe_desc` section and the `.pseudo_probe` section. The `.pseudo_probe_desc` section stores a function descriptor for each function and the `.pseudo_probe` section stores the actual probes, each fo which corresponds to an IR basic block or an IR function callsite. A function descriptor is stored as a module-level metadata during the compilation and is serialized into the object file during object emission.
Both the probe descriptors and pseudo probes can be emitted into a separate ELF section per function to leverage the linker for deduplication. A `.pseudo_probe` section shares the same COMDAT group with the function code so that when the function is dead, the probes are dead and disposed too. On the contrary, a `.pseudo_probe_desc` section has its own COMDAT group. This is because even if a function is dead, its probes may be inlined into other functions and its descriptor is still needed by the profile generation tool.
The format of `.pseudo_probe_desc` section looks like:
```
.section .pseudo_probe_desc,"",@progbits
.quad 6309742469962978389 // Func GUID
.quad 4294967295 // Func Hash
.byte 9 // Length of func name
.ascii "_Z5funcAi" // Func name
.quad 7102633082150537521
.quad 138828622701
.byte 12
.ascii "_Z8funcLeafi"
.quad 446061515086924981
.quad 4294967295
.byte 9
.ascii "_Z5funcBi"
.quad -2016976694713209516
.quad 72617220756
.byte 7
.ascii "_Z3fibi"
```
For each `.pseudoprobe` section, the encoded binary data consists of a single function record corresponding to an outlined function (i.e, a function with a code entry in the `.text` section). A function record has the following format :
```
FUNCTION BODY (one for each outlined function present in the text section)
GUID (uint64)
GUID of the function
NPROBES (ULEB128)
Number of probes originating from this function.
NUM_INLINED_FUNCTIONS (ULEB128)
Number of callees inlined into this function, aka number of
first-level inlinees
PROBE RECORDS
A list of NPROBES entries. Each entry contains:
INDEX (ULEB128)
TYPE (uint4)
0 - block probe, 1 - indirect call, 2 - direct call
ATTRIBUTE (uint3)
reserved
ADDRESS_TYPE (uint1)
0 - code address, 1 - address delta
CODE_ADDRESS (uint64 or ULEB128)
code address or address delta, depending on ADDRESS_TYPE
INLINED FUNCTION RECORDS
A list of NUM_INLINED_FUNCTIONS entries describing each of the inlined
callees. Each record contains:
INLINE SITE
GUID of the inlinee (uint64)
ID of the callsite probe (ULEB128)
FUNCTION BODY
A FUNCTION BODY entry describing the inlined function.
```
To support building a context-sensitive profile, probes from inlinees are grouped by their inline contexts. An inline context is logically a call path through which a callee function lands in a caller function. The probe emitter builds an inline tree based on the debug metadata for each outlined function in the form of a trie tree. A tree root is the outlined function. Each tree edge stands for a callsite where inlining happens. Pseudo probes originating from an inlinee function are stored in a tree node and the tree path starting from the root all the way down to the tree node is the inline context of the probes. The emission happens on the whole tree top-down recursively. Probes of a tree node will be emitted altogether with their direct parent edge. Since a pseudo probe corresponds to a real code address, for size savings, the address is encoded as a delta from the previous probe except for the first probe. Variant-sized integer encoding, aka LEB128, is used for address delta and probe index.
**Assembling**
Pseudo probes can be printed as assembly directives alternatively. This allows for good assembly code readability and also provides a view of how optimizations and pseudo probes affect each other, especially helpful for diff time assembly analysis.
A pseudo probe directive has the following operands in order: function GUID, probe index, probe type, probe attributes and inline context. The directive is generated by the compiler and can be parsed by the assembler to form an encoded `.pseudoprobe` section in the object file.
A example assembly looks like:
```
foo2: # @foo2
# %bb.0: # %bb0
pushq %rax
testl %edi, %edi
.pseudoprobe 837061429793323041 1 0 0
je .LBB1_1
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 6 2 0
callq foo
.pseudoprobe 837061429793323041 3 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
.LBB1_1: # %bb1
.pseudoprobe 837061429793323041 5 1 0
callq *%rsi
.pseudoprobe 837061429793323041 2 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
# -- End function
.section .pseudo_probe_desc,"",@progbits
.quad 6699318081062747564
.quad 72617220756
.byte 3
.ascii "foo"
.quad 837061429793323041
.quad 281547593931412
.byte 4
.ascii "foo2"
```
With inlining turned on, the assembly may look different around %bb2 with an inlined probe:
```
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 3 0
.pseudoprobe 6699318081062747564 1 0 @ 837061429793323041:6
.pseudoprobe 837061429793323041 4 0
popq %rax
retq
```
**Disassembling**
We have a disassembling tool (llvm-profgen) that can display disassembly alongside with pseudo probes. So far it only supports ELF executable file.
An example disassembly looks like:
```
00000000002011a0 <foo2>:
2011a0: 50 push rax
2011a1: 85 ff test edi,edi
[Probe]: FUNC: foo2 Index: 1 Type: Block
2011a3: 74 02 je 2011a7 <foo2+0x7>
[Probe]: FUNC: foo2 Index: 3 Type: Block
[Probe]: FUNC: foo2 Index: 4 Type: Block
[Probe]: FUNC: foo Index: 1 Type: Block Inlined: @ foo2:6
2011a5: 58 pop rax
2011a6: c3 ret
[Probe]: FUNC: foo2 Index: 2 Type: Block
2011a7: bf 01 00 00 00 mov edi,0x1
[Probe]: FUNC: foo2 Index: 5 Type: IndirectCall
2011ac: ff d6 call rsi
[Probe]: FUNC: foo2 Index: 4 Type: Block
2011ae: 58 pop rax
2011af: c3 ret
```
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91878
If a function parameter is marked as "undef", prevent creation
of CallSiteInfo for that parameter.
Without this patch, the parameter's call_site_value would be incorrect.
The incorrect call_value case reported in PR39716,
addressed in D85111.
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D92471
This patch makes DWARF writer emit DW_AT_string_length using
the stringLengthExp operand of DIStringType.
This is part of the effort to add debug info support for
Fortran deferred length strings.
Also updated the tests to exercise the change.
Differential Revision: https://reviews.llvm.org/D92412
Notes about a few declarations:
* LiveVariables::RegisterDefIsDead: deleted by r47927
* createForwardControlFlowIntegrityPass, createJumpInstrTablesPass: deleted by r230780
* RegScavenger::setLiveInsUsed: deleted by r292543
* ScheduleDAGInstrs::{toggleKillFlag,startBlockForKills}: deleted by r304055
* Localizer::shouldLocalize: remnant of D75207
* DwarfDebug::addSectionLabel: deleted by r373273
Summary:
Not all system assembler supports `.uleb128 label2 - label1` form.
When the target do not support this form, we have to take
alternative manual calculation to get the offsets from them.
Reviewed By: hubert.reinterpretcast
Diffierential Revision: https://reviews.llvm.org/D92058
Summary:
AIX uses the existing EH infrastructure in clang and llvm.
The major differences would be
1. AIX do not have CFI instructions.
2. AIX uses a new personality routine, named __xlcxx_personality_v1.
It doesn't use the GCC personality rountine, because the
interoperability is not there yet on AIX.
3. AIX do not use eh_frame sections. Instead, it would use a eh_info
section (compat unwind section) to store the information about
personality routine and LSDA data address.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D91455
In https://reviews.llvm.org/D89072 I added static const data members
to the debug subsection for globals. It skipped emitting an S_CONSTANT if it
didn't have a value, which meant the subsection could be empty.
This patch fixes the empty subsection issue.
Differential Revision: https://reviews.llvm.org/D92049
This reapplies 36c64af9d7 in updated
form.
Emit the xdata for each function at .seh_endproc. This keeps the
exact same output header order for most code generated by the LLVM
CodeGen layer. (Sections still change order for code built from
assembly where functions lack an explicit .seh_handlerdata
directive, and functions with chained unwind info.)
The practical effect should be that assembly output lacks
superfluous ".seh_handlerdata; .text" pairs at the end of functions
that don't handle exceptions, which allows such functions to use
the AArch64 packed unwind format again.
Differential Revision: https://reviews.llvm.org/D87448
This patch moves the selection of the style used to emit the numbers
(DW_OP_implicit_value vs. DW_OP_const+DW_OP_stack_value) into
DwarfExpression::addUnsignedConstant. This logic is not FP-specific, and
it will be needed for large integers too.
The refactor also makes DW_OP_implicit_value (DW_OP_stack_value worked
already) be used for floating point constants other than float and
double, so I've added a _Float16 test for it.
Split off from D90916.
Differential Revision: https://reviews.llvm.org/D91058
All these potential null pointer dereferences are reported by my static analyzer for null smart pointer dereferences, which has a different implementation from `alpha.cplusplus.SmartPtr`.
The checked pointers in this patch are initialized by Target::createXXX functions. When the creator function pointer is not correctly set, a null pointer will be returned, or the creator function may originally return a null pointer.
Some of them may not make sense as they may be checked before entering the function, but I fixed them all in this patch. I submit this fix because 1) similar checks are found in some other places in the LLVM codebase for the same return value of the function; and, 2) some of the pointers are dereferenced before they are checked, which may definitely trigger a null pointer dereference if the return value is nullptr.
Reviewed By: tejohnson, MaskRay, jpienaar
Differential Revision: https://reviews.llvm.org/D91410
The `dso_local_equivalent` constant is a wrapper for functions that represents a
value which is functionally equivalent to the global passed to this. That is, if
this accepts a function, calling this constant should have the same effects as
calling the function directly. This could be a direct reference to the function,
the `@plt` modifier on X86/AArch64, a thunk, or anything that's equivalent to the
resolved function as a call target.
When lowered, the returned address must have a constant offset at link time from
some other symbol defined within the same binary. The address of this value is
also insignificant. The name is leveraged from `dso_local` where use of a function
or variable is resolved to a symbol in the same linkage unit.
In this patch:
- Addition of `dso_local_equivalent` and handling it
- Update Constant::needsRelocation() to strip constant inbound GEPs and take
advantage of `dso_local_equivalent` for relative references
This is useful for the [Relative VTables C++ ABI](https://reviews.llvm.org/D72959)
which makes vtables readonly. This works by replacing the dynamic relocations for
function pointers in them with static relocations that represent the offset between
the vtable and virtual functions. If a function is externally defined,
`dso_local_equivalent` can be used as a generic wrapper for the function to still
allow for this static offset calculation to be done.
See [RFC](http://lists.llvm.org/pipermail/llvm-dev/2020-August/144469.html) for more details.
Differential Revision: https://reviews.llvm.org/D77248
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
This patch uses the new `getMnemonic` helper from D90039
to display mnemonics instead of the internal opcodes.
The main motivation behind using the mnemonics is that they
are more user-friendly and more directly related to the assembly
the users will be presented.
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D90040
The test fails on Mac, see comment on the code review.
> This option was in a rather convoluted place, causing global parameters
> to be set in awkward and undesirable ways to try to account for it
> indirectly. Add tests for the -disable-debug-info option and ensure we
> don't print unintended markers from unintended places.
>
> Reviewed By: dstenb
>
> Differential Revision: https://reviews.llvm.org/D91083
This reverts commit 9606ef03f0.
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
This option was in a rather convoluted place, causing global parameters
to be set in awkward and undesirable ways to try to account for it
indirectly. Add tests for the -disable-debug-info option and ensure we
don't print unintended markers from unintended places.
Reviewed By: dstenb
Differential Revision: https://reviews.llvm.org/D91083
This broke both Firefox and Chromium (PR47905) due to what seems like dllimport
function not being handled correctly.
> This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
> Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
>
> Reviewed By: rnk
>
> Differential Revision: https://reviews.llvm.org/D87544
This reverts commit cfd8481da1.
To accommodate frame layouts that have both fixed and scalable objects
on the stack, describing a stack location or offset using a pointer + uint64_t
is not sufficient. For this reason, we've introduced the StackOffset class,
which models both the fixed- and scalable sized offsets.
The TargetFrameLowering::getFrameIndexReference is made to return a StackOffset,
so that this can be used in other interfaces, such as to eliminate frame indices
in PEI or to emit Debug locations for variables on the stack.
This patch is purely mechanical and doesn't change the behaviour of how
the result of this function is used for fixed-sized offsets. The patch adds
various checks to assert that the offset has no scalable component, as frame
offsets with a scalable component are not yet supported in various places.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D90018
This lets external consumers customize the output, similar to how
AssemblyAnnotationWriter lets the caller define callbacks when printing
IR. The array of handlers already existed, this just cleans up the code
so that it can be exposed publically.
Replaces https://reviews.llvm.org/D74158
Differential Revision: https://reviews.llvm.org/D89613
This caused an explosion in ICF times during linking on Windows when libfuzzer
instrumentation is enabled. For a small binary we see ICF time go from ~0 to
~10 s. For a large binary it goes from ~1 s to forevert (I gave up after 30
minutes).
See comment on the code review.
> If we are going to write handler data (that is written as variable
> length data following after the unwind info in .xdata), we need to
> emit the handler data immediately, but for cases where no such
> info is going to be written, skip emitting it right away. (Unwind
> info for all remaining functions that hasn't gotten it emitted
> directly is emitted at the end.)
>
> This does slightly change the ordering of sections (triggering a
> bunch of updates to DebugInfo/COFF tests), but the change should be
> benign.
>
> This also matches GCC's assembly output, which doesn't output
> .seh_handlerdata unless it actually is needed.
>
> For ARM64, the unwind info can be packed into the runtime function
> entry itself (leaving no data in the .xdata section at all), but
> that can only be done if there's no follow-on data in the .xdata
> section. If emission of the unwind info is triggered via
> EmitWinEHHandlerData (or the .seh_handlerdata directive), which
> implicitly switches to the .xdata section, there's a chance of the
> caller wanting to pass further data there, so the packed format
> can't be used in that case.
>
> Differential Revision: https://reviews.llvm.org/D87448
This reverts commit 36c64af9d7.
MC currently produces monolithic .gcc_except_table section. GCC can split up .gcc_except_table:
* if comdat: `.section .gcc_except_table._Z6comdatv,"aG",@progbits,_Z6comdatv,comdat`
* otherwise, if -ffunction-sections: `.section .gcc_except_table._Z3fooi,"a",@progbits`
This ensures that (a) non-prevailing copies are discarded and (b)
.gcc_except_table associated to discarded text sections can be discarded by a
.gcc_except_table-aware linker (GNU ld, but not gold or LLD)
This patches matches the GCC behavior. If -fno-unique-section-names is
specified, we don't append the suffix. If -ffunction-sections is additionally specified,
use `.section ...,unique`.
Note, if clang driver communicates that the linker is LLD and we know it
is new (11.0.0 or later) we can use SHF_LINK_ORDER to avoid string table
costs, at least in the -fno-unique-section-names case. We cannot use it on GNU
ld because as of binutils 2.35 it does not support mixed SHF_LINK_ORDER &
non-SHF_LINK_ORDER components in an output section
https://sourceware.org/bugzilla/show_bug.cgi?id=26256
For RISC-V -mrelax, this patch additionally fixes an assembler-linker
interaction problem: because a section is shrinkable, the length of a call-site
code range is not a constant. Relocations referencing the associated text
section (STT_SECTION) are needed. However, a STB_LOCAL relocation referencing a
discarded section group member from outside the group is disallowed by the ELF
specification (PR46675):
```
// a.cc
inline int comdat() { try { throw 1; } catch (int) { return 1; } return 0; }
int main() { return comdat(); }
// b.cc
inline int comdat() { try { throw 1; } catch (int) { return 1; } return 0; }
int foo() { return comdat(); }
clang++ -target riscv64-linux -c a.cc b.cc -fPIC -mno-relax
ld.lld -shared a.o b.o => ld.lld: error: relocation refers to a symbol in a discarded section:
```
-fbasic-block-sections= is similar to RISC-V -mrelax: there are outstanding relocations.
Reviewed By: jrtc27, rahmanl
Differential Revision: https://reviews.llvm.org/D83655
This commit adds a missed out line in earlier commit for DW_TAG_generic_subrange.
Previous commit ID: a6dd01afa3
Differential Revision: https://reviews.llvm.org/D89218
Thanks markus for pointing this out.
Since Wasm comdat sections work similarly to ELF, we can use that mechanism
to eliminate duplicate dwarf type information in the same way.
Differential Revision: https://reviews.llvm.org/D88603
We used to only emit static const data members in CodeView as
S_CONSTANTS when they were used; this patch makes it so they are always emitted.
This changes CodeViewDebug.cpp to find the static const members from the
class debug info instead of creating DIGlobalVariables in the IR
whenever a static const data member is used.
Bug: https://bugs.llvm.org/show_bug.cgi?id=47580
Differential Revision: https://reviews.llvm.org/D89072
This reverts commit 504615353f.
This is needed to support fortran assumed rank arrays which
have runtime rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF TAG
DW_TAG_generic_subrange is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89218
Fix an out-of-bounds shift in emitLegacyZExt by using a slightly more
complicated dwarf expression to create the zext mask.
This addresses a UBSan diagnostic seen when compiling compiler-rt
(llvm.org/PR47927).
rdar://70307714
Differential Revision: https://reviews.llvm.org/D89838
The types of SEH aren't x86(-32) vs x64 but rather stack-based exception chaining
vs table-based exception handling. x86-32 is the only arch for which Windows
uses the former. 32-bit ARM would use what is called Win64SEH today, which
is a bit confusing so instead let's just rename it to be a bit more clear.
Reviewed By: compnerd, rnk
Differential Revision: https://reviews.llvm.org/D90117
Since Wasm comdat sections work similarly to ELF, we can use that mechanism
to eliminate duplicate dwarf type information in the same way.
Differential Revision: https://reviews.llvm.org/D88603
Sometimes in unoptimized code, we have dangling unreachable basic blocks with no predecessors. Basic block sections should be emitted for those as well. Without this patch, the included test fails with a fatal error in `AsmPrinter::emitBasicBlockEnd`.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D89423
We used to only emit static const data members in CodeView as
S_CONSTANTS when they were used; this patch makes it so they are always emitted.
I changed CodeViewDebug.cpp to find the static const members from the
class debug info instead of creating DIGlobalVariables in the IR
whenever a static const data member is used.
Bug: https://bugs.llvm.org/show_bug.cgi?id=47580
Differential Revision: https://reviews.llvm.org/D89072
This patch adds a remarks that provides counts for each opcode per basic block.
An snippet of the generated information can be seen below.
The current implementation uses the target specific opcode for the counts. For example, on AArch64 this means we currently get 2 entries for `add` instructions if the block contains 32 and 64 bit adds. Similarly, immediate version are treated differently.
Unfortunately there seems to be no convenient way to get only the mnemonic part of the instruction as a string AFAIK. This could be improved in the future.
```
--- !Analysis
Pass: asm-printer
Name: InstructionMix
DebugLoc: { File: arm64-instruction-mix-remarks.ll, Line: 30, Column: 30 }
Function: foo
Args:
- String: 'BasicBlock: '
- BasicBlock: else
- String: "\n"
- String: INST_MADDWrrr
- String: ': '
- INST_MADDWrrr: '2'
- String: "\n"
- String: INST_MOVZWi
- String: ': '
- INST_MOVZWi: '1'
```
Reviewed By: anemet, thegameg, paquette
Differential Revision: https://reviews.llvm.org/D89892
This patch enables emitting DWARF `DW_OP_implicit_value` opcode when
tuning debug information for LLDB (`-debugger-tune=lldb`).
This will also propagate to Darwin platforms, since they use LLDB tuning
as a default.
rdar://67406059
Differential Revision: https://reviews.llvm.org/D90001
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Testing reveals that lldb and gdb have some problems with supporting
DW_OP_convert - gdb with Split DWARF tries to resolve the CU-relative
DIE offset relative to the skeleton DIE. lldb tries to treat the offset
as absolute, which judging by the llvm-dsymutil support for
DW_OP_convert, I guess works OK in MachO? (though probably llvm-dsymutil
is producing invalid DWARF by resolving the relative reference to an
absolute one?).
Specifically this disables DW_OP_convert usage in DWARFv5 if:
* Tuning for GDB and using Split DWARF
* Tuning for LLDB and not targeting MachO
Create the LLVM / CodeView register mappings for the 32-bit ARM Window targets.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D89622
In certain places in llvm/lib/CodeGen we were relying upon the TypeSize
comparison operators when in fact the code was only ever expecting
either scalar values or fixed width vectors. I've changed some of these
places to use the equivalent scalar operator.
Differential Revision: https://reviews.llvm.org/D88482
LLVM rejects DWARF operator DW_OP_over. This DWARF operator is needed
for Flang to support assumed rank array.
Summary:
Currently LLVM rejects DWARF operator DW_OP_over. Below error is
produced when llvm finds this operator.
[..]
invalid expression
!DIExpression(151, 20, 16, 48, 30, 35, 80, 34, 6)
warning: ignoring invalid debug info in over.ll
[..]
There were some parts missing in support of this operator, which are
now completed.
Testing
-added a unit testcase
-check-debuginfo
-check-llvm
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89208
This lets external consumers customize the output, similar to how
AssemblyAnnotationWriter lets the caller define callbacks when printing
IR. The array of handlers already existed, this just cleans up the code
so that it can be exposed publically.
Differential Revision: https://reviews.llvm.org/D74158
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
This patch adds support for DWARF attribute DW_AT_rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF attribute
DW_AT_rank is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89141
This patch lets the bb_addr_map (renamed to __llvm_bb_addr_map) section use a special section type (SHT_LLVM_BB_ADDR_MAP) instead of SHT_PROGBITS. This would help parsers, dumpers and other tools to use the sh_type ELF field to identify this section rather than relying on string comparison on the section name.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D88199
Currently, AsmPrinter code is organized in a way in which the labels of address-taken blocks are emitted in the previous section, which makes the relocation incorrect.
This patch reorganizes the code to switch to the basic block section before handling address-taken blocks.
Reviewed By: snehasish, MaskRay
Differential Revision: https://reviews.llvm.org/D88517
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
This is part of the Propeller framework to do post link code layout optimizations. Please see the RFC here: https://groups.google.com/forum/#!msg/llvm-dev/ef3mKzAdJ7U/1shV64BYBAAJ and the detailed RFC doc here: https://github.com/google/llvm-propeller/blob/plo-dev/Propeller_RFC.pdf
This patch provides exception support for basic block sections by splitting the call-site table into call-site ranges corresponding to different basic block sections. Still all landing pads must reside in the same basic block section (which is guaranteed by the the core basic block section patch D73674 (ExceptionSection) ). Each call-site table will refer to the landing pad fragment by explicitly specifying @LPstart (which is omitted in the normal non-basic-block section case). All these call-site tables will share their action and type tables.
The C++ ABI somehow assumes that no landing pads point directly to LPStart (which works in the normal case since the function begin is never a landing pad), and uses LP.offset = 0 to specify no landing pad. In the case of basic block section where one section contains all the landing pads, the landing pad offset relative to LPStart could actually be zero. Thus, we avoid zero-offset landing pads by inserting a **nop** operation as the first non-CFI instruction in the exception section.
**Background on Exception Handling in C++ ABI**
https://github.com/itanium-cxx-abi/cxx-abi/blob/master/exceptions.pdf
Compiler emits an exception table for every function. When an exception is thrown, the stack unwinding library queries the unwind table (which includes the start and end of each function) to locate the exception table for that function.
The exception table includes a call site table for the function, which is used to guide the exception handling runtime to take the appropriate action upon an exception. Each call site record in this table is structured as follows:
| CallSite | --> Position of the call site (relative to the function entry)
| CallSite length | --> Length of the call site.
| Landing Pad | --> Position of the landing pad (relative to the landing pad fragment’s begin label)
| Action record offset | --> Position of the first action record
The call site records partition a function into different pieces and describe what action must be taken for each callsite. The callsite fields are relative to the start of the function (as captured in the unwind table).
The landing pad entry is a reference into the function and corresponds roughly to the catch block of a try/catch statement. When execution resumes at a landing pad, it receives an exception structure and a selector value corresponding to the type of the exception thrown, and executes similar to a switch-case statement. The landing pad field is relative to the beginning of the procedure fragment which includes all the landing pads (@LPStart). The C++ ABI requires all landing pads to be in the same fragment. Nonetheless, without basic block sections, @LPStart is the same as the function @Start (found in the unwind table) and can be omitted.
The action record offset is an index into the action table which includes information about which exception types are caught.
**C++ Exceptions with Basic Block Sections**
Basic block sections break the contiguity of a function fragment. Therefore, call sites must be specified relative to the beginning of the basic block section. Furthermore, the unwinding library should be able to find the corresponding callsites for each section. To do so, the .cfi_lsda directive for a section must point to the range of call-sites for that section.
This patch introduces a new **CallSiteRange** structure which specifies the range of call-sites which correspond to every section:
`struct CallSiteRange {
// Symbol marking the beginning of the precedure fragment.
MCSymbol *FragmentBeginLabel = nullptr;
// Symbol marking the end of the procedure fragment.
MCSymbol *FragmentEndLabel = nullptr;
// LSDA symbol for this call-site range.
MCSymbol *ExceptionLabel = nullptr;
// Index of the first call-site entry in the call-site table which
// belongs to this range.
size_t CallSiteBeginIdx = 0;
// Index just after the last call-site entry in the call-site table which
// belongs to this range.
size_t CallSiteEndIdx = 0;
// Whether this is the call-site range containing all the landing pads.
bool IsLPRange = false;
};`
With N basic-block-sections, the call-site table is partitioned into N call-site ranges.
Conceptually, we emit the call-site ranges for sections sequentially in the exception table as if each section has its own exception table. In the example below, two sections result in the two call site ranges (denoted by LSDA1 and LSDA2) placed next to each other. However, their call-sites will refer to records in the shared Action Table. We also emit the header fields (@LPStart and CallSite Table Length) for each call site range in order to place the call site ranges in separate LSDAs. We note that with -basic-block-sections, The CallSiteTableLength will not actually represent the length of the call site table, but rather the reference to the action table. Since the only purpose of this field is to locate the action table, correctness is guaranteed.
Finally, every call site range has one @LPStart pointer so the landing pads of each section must all reside in one section (not necessarily the same section). To make this easier, we decide to place all landing pads of the function in one section (hence the `IsLPRange` field in CallSiteRange).
| @LPStart | ---> Landing pad fragment ( LSDA1 points here)
| CallSite Table Length | ---> Used to find the action table.
| CallSites |
| … |
| … |
| @LPStart | ---> Landing pad fragment ( LSDA2 points here)
| CallSite Table Length |
| CallSites |
| … |
| … |
…
…
| Action Table |
| Types Table |
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D73739
This is a fix for PR47630. The regression is caused by the D78011. After
this change the code starts to call the `emitGlobalConstantLargeInt` even
for constants which requires eight bytes to store.
Differential revision: https://reviews.llvm.org/D88261
Until then, this one line fix removes the assert fail with basic block sections
with debug info. Bug tracking this: #47549
This fix does not generate loc list or DW_AT_const_value if the argument is
mentioned in a different section than the start of the function.
Temporarily fixes bugzilla : https://bugs.llvm.org/show_bug.cgi?id=47549
Differential Revision: https://reviews.llvm.org/D87787
If we are going to write handler data (that is written as variable
length data following after the unwind info in .xdata), we need to
emit the handler data immediately, but for cases where no such
info is going to be written, skip emitting it right away. (Unwind
info for all remaining functions that hasn't gotten it emitted
directly is emitted at the end.)
This does slightly change the ordering of sections (triggering a
bunch of updates to DebugInfo/COFF tests), but the change should be
benign.
This also matches GCC's assembly output, which doesn't output
.seh_handlerdata unless it actually is needed.
For ARM64, the unwind info can be packed into the runtime function
entry itself (leaving no data in the .xdata section at all), but
that can only be done if there's no follow-on data in the .xdata
section. If emission of the unwind info is triggered via
EmitWinEHHandlerData (or the .seh_handlerdata directive), which
implicitly switches to the .xdata section, there's a chance of the
caller wanting to pass further data there, so the packed format
can't be used in that case.
Differential Revision: https://reviews.llvm.org/D87448
This changes the order of output sections and the output assembly, but
is otherwise NFC.
It simplifies the TLOF interface by removing two COFF-only methods.
Initial support for dwarf fission sections (-gsplit-dwarf) on wasm.
The most interesting change is support for writing 2 files (.o and .dwo) in the
wasm object writer. My approach moves object-writing logic into its own function
and calls it twice, swapping out the endian::Writer (W) in between calls.
It also splits the import-preparation step into its own function (and skips it when writing a dwo).
Differential Revision: https://reviews.llvm.org/D85685
An AsmPrinter should always be provided to the method because some forms
depend on its parameters. The only place in the codebase which passed
a nullptr value was found in the unit tests, so the patch updates it to
use some dummy AsmPrinter instead.
Differential Revision: https://reviews.llvm.org/D85293
In the case of LTO, several DWARF units can be emitted in one section.
For an extremely large application, they may exceed the limit of 4GiB
for 32-bit offsets. As it is now possible to emit 64-bit debugging info,
the patch enables storing the larger offsets.
Differential Revision: https://reviews.llvm.org/D87026
The string pool is shared among several units in the case of LTO,
and it potentially can exceed the limit of 4GiB for an extremely
large application. As it is now possible to emit 64-bit debugging
info, the limitation can be removed.
Differential Revision: https://reviews.llvm.org/D87025
The patch fixes emitting flags and the debug_line_offset field in
the header, as well as the reference to the macro string for
a pre-standard GNU .debug_macro extension.
Differential Revision: https://reviews.llvm.org/D87024
The patch fixes emitting the unit length field in the header of
the table and offsets to the entry pool. Note that while the patch
changes the common method to emit offsets, in fact, nothing is changed
for Apple accelerator tables, because we do not yet support DWARF64 for
those targets.
Differential Revision: https://reviews.llvm.org/D87023
The patch fixes emitting the header of the table. The content is
independent of the DWARF format.
Differential Revision: https://reviews.llvm.org/D87022
The transition is done by using methods of AsmPrinter which
automatically emit values in compliance with the selected DWARF format.
Differential Revision: https://reviews.llvm.org/D87013
The patch fixes calculating the size of the table and emitting
the fields which depend on the DWARF format by using methods that
choose appropriate sizes automatically.
Differential Revision: https://reviews.llvm.org/D87012
The patch fixes emitting the offset to the type DIE. All other fields
are already fixed in previous patches.
Differential Revision: https://reviews.llvm.org/D87021
These two fixes are better to go together because llvm-dwarfdump is
unable to dump a table when another one is malformed.
Differential Revision: https://reviews.llvm.org/D87018
The patch uses a common method to determine the appropriate form for
the value of the attribute.
Differential Revision: https://reviews.llvm.org/D87016
This is mostly an NFC patch because the involved methods are used when
emitting DWO files, which is incompatible with DWARFv3, or for platforms
where DWARF64 is not supported yet.
Differential Revision: https://reviews.llvm.org/D87015
The patch also adds a method to choose an appropriate DWARF form
to represent section offsets according to the version and the format
of producing debug info.
Differential Revision: https://reviews.llvm.org/D87014
The patch adds a switch to enable emitting debug info in the 64-bit
DWARF format. Most emitter for sections will be updated in the subsequent
patches, whereas for .debug_line and .debug_frame the emitters are in
the MC library, which is already updated.
For now, the switch is enabled only for 64-bit ELF targets.
Differential Revision: https://reviews.llvm.org/D87011
DW_FORM_sec_offset and DW_FORM_strp imply values of different sizes with
DWARF32 and DWARF64. The patch fixes DIE value classes to use correct
sizes when emitting their values. For DIELocList it ensures that the
requested DWARF form matches the current DWARF format because that class
uses a method that selects the size automatically.
Differential Revision: https://reviews.llvm.org/D87009
These methods are used to emit values which are 32-bit in DWARF32 and
64-bit in DWARF64. The patch fixes them so that they choose the length
automatically, depending on the DWARF format set in the Context.
Differential Revision: https://reviews.llvm.org/D87008
This patch introduces the new .bb_addr_map section feature which allows us to emit the bits needed for mapping binary profiles to basic blocks into a separate section.
The format of the emitted data is represented as follows. It includes a header for every function:
| Address of the function | -> 8 bytes (pointer size)
| Number of basic blocks in this function (>0) | -> ULEB128
The header is followed by a BB record for every basic block. These records are ordered in the same order as MachineBasicBlocks are placed in the function. Each BB Info is structured as follows:
| Offset of the basic block relative to function begin | -> ULEB128
| Binary size of the basic block | -> ULEB128
| BB metadata | -> ULEB128 [ MBB.isReturn() OR MBB.hasTailCall() << 1 OR MBB.isEHPad() << 2 ]
The new feature will replace the existing "BB labels" functionality with -basic-block-sections=labels.
The .bb_addr_map section scrubs the specially-encoded BB symbols from the binary and makes it friendly to profilers and debuggers.
Furthermore, the new feature reduces the binary size overhead from 70% bloat to only 12%.
For more information and results please refer to the RFC: https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html
Reviewed By: MaskRay, snehasish
Differential Revision: https://reviews.llvm.org/D85408
Add a DBG_INSTR_REF instruction and a "debug instruction number" field to
MachineInstr. The two allow variable values to be specified by
identifying where the value is computed, rather than the register it lies
in, like so:
%0 = fooinst, debug-instr-number 1
[...]
DBG_INSTR_REF 1, 0
See the original RFC for motivation:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139440.html
This patch is NFCI; it only adds fields and other boiler plate.
Differential Revision: https://reviews.llvm.org/D85741
This is to fix CodeView build failure https://bugs.llvm.org/show_bug.cgi?id=47287
after DIsSubrange upgrade D80197
Assert condition is now removed and Count is calculated in case LowerBound
is absent or zero and Count or UpperBound is constant. If Count is unknown
it is later handled as VLA (currently Count is set to zero).
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87406
a warning about clobbering reserved registers (NFC).
Also address some minor inefficiencies and style issues.
Differential Revision: https://reviews.llvm.org/D86088
As stated in section 6.1.1.2, DWARFv5, p. 142,
| The last entry for each name is followed by a zero byte that
| terminates the list. There may be gaps between the lists.
The patch changes emitting a 4-byte zero value to a 1-byte one, which
effectively removes the gap between entry lists, and thus saves
approximately 3 bytes per name; the calculation is not exact because
the total size of the table is aligned to 4.
Differential Revision: https://reviews.llvm.org/D86927
The member is not in use; the unit length for the table is emitted as
a difference between two labels. Moreover, the type of the member might
be misleading, because for DWARF64 the field should be 64 bit long.
Differential Revision: https://reviews.llvm.org/D86912
This reverts commit b9d977b0ca.
This cutoff is no longer required. The commit 34ffa7fc501 (D86153) introduces a
performance improvement which was tested against the motivating case for this
patch.
Discussed in differential revision: https://reviews.llvm.org/D86153
Almost NFC (see end).
The backwards scan in validThroughout significantly contributed to compile time
for a pathological case, causing the 'X86 Assembly Printer' pass to account for
roughly 70% of the run time. This patch guards the loop against running
unnecessarily, bringing the pass contribution down to 4%.
Almost NFC: There is a hack in validThroughout which promotes single constant
value DBG_VALUEs in the prologue to be live throughout the function. We're more
likely to hit this code path with this patch applied. Similarly to the parent
patches there is a small coverage change reported in the order of 10s of bytes.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86153
With the changes introduced in D86151 we can now check for single locations
which span multiple blocks for inlined scopes and blocks.
D86151 introduced the InstructionOrdering parameter, replacing a scan through
MBB instructions. The functionality to compare instruction positions across
blocks was add there, and this patch just removes the exit checks that were
previously (but no longer) required.
CTMark shows a geomean binary size reduction of 2.2% for RelWithDebInfo builds.
llvm-locstats (using D85636) shows a very small variable location coverage
change in 5 of 10 binaries, but just like in D86151 it is only in the order of
10s of bytes.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D86152
With this patch we're now accounting for two more cases which should be
considered 'valid throughout': First, where RangeEnd is ScopeEnd. Second, where
RangeEnd comes before ScopeEnd when including meta instructions, but are both
preceded by the same non-meta instruction.
CTMark shows a geomean binary size reduction of 1.5% for RelWithDebInfo builds.
`llvm-locstats` (using D85636) shows a very small variable location coverage
change in 2 of 10 binaries, but it is in the order of 10s of bytes which lines
up with my expectations.
I've added a test which checks both of these new cases. The first check in the
test isn't strictly necessary for this patch. But I'm not sure that it is
explicitly tested anywhere else, and is useful for the final patch in the
series.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86151
Group the map and methods used to query instruction ordering for trimVarLocs
(D82129) into a class. This will make it easier to reuse the functionality
upcoming patches.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86150
This patch adds type information for SVE ACLE vector types,
by describing them as vectors, with a lower bound of 0, and
an upper bound described by a DWARF expression using the
AArch64 Vector Granule register (VG), which contains the
runtime multiple of 64bit granules in an SVE vector.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86101
This patch adds support for representing Fortran `character(n)`.
Primarily patch is based out of D54114 with appropriate modifications.
Test case IR is generated using our downstream classic-flang. We're in process
of upstreaming flang PR's but classic-flang has dependencies on llvm, so
this has to get in first.
Patch includes functional test case for both IR and corresponding
dwarf, furthermore it has been manually tested as well using GDB.
Source snippet:
```
program assumedLength
call sub('Hello')
call sub('Goodbye')
contains
subroutine sub(string)
implicit none
character(len=*), intent(in) :: string
print *, string
end subroutine sub
end program assumedLength
```
GDB:
```
(gdb) ptype string
type = character (5)
(gdb) p string
$1 = 'Hello'
```
Reviewed By: aprantl, schweitz
Differential Revision: https://reviews.llvm.org/D86305
The byte swapping, when dealing with 4 byte (float) FP constants
in DwarfExpression::addConstantFP, added in commit ef8992b9f0
was not correct. It always performed byte swapping using an
uint64_t value. When dealing with 4 byte values the 4 interesting
bytes ended up in the big end of the uint64_t, but later we emitted
the 4 bytes at the little end. So we ended up with zeroes being
emitted and faulty debug information.
This patch simplifies things a bit, IMHO. Using the APInt
representation throughout the function, instead of looking at
the internal representation using getRawBytes and without using
reinterpret_cast etc. And using API.byteSwap() should result in
correct byte swapping independent of APInt being 4 or 8 bytes.
Differential Revision: https://reviews.llvm.org/D86272
This patch was reverted in 7c182663a8 due to some failures
observed on PCC based machines. Failures were due to Endianness issue and
long double representation issues.
Patch is revised to address Endianness issue. Furthermore, support
for emission of `DW_OP_implicit_value` for `long double` has been removed
(since it was unclean at the moment). Planning to handle this in
a clean way soon!
For more context, please refer to following review link.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
llvm is missing support for DW_OP_implicit_value operation.
DW_OP_implicit_value op is indispensable for cases such as
optimized out long double variables.
For intro refer: DWARFv5 Spec Pg: 40 2.6.1.1.4 Implicit Location Descriptions
Consider the following example:
```
int main() {
long double ld = 3.14;
printf("dummy\n");
ld *= ld;
return 0;
}
```
when compiled with tunk `clang` as
`clang test.c -g -O1` produces following location description
of variable `ld`:
```
DW_AT_location (0x00000000:
[0x0000000000201691, 0x000000000020169b): DW_OP_constu 0xc8f5c28f5c28f800, DW_OP_stack_value, DW_OP_piece 0x8, DW_OP_constu 0x4000, DW_OP_stack_value, DW_OP_bit_piece 0x10 0x40, DW_OP_stack_value)
DW_AT_name ("ld")
```
Here one may notice that this representation is incorrect(DWARF4
stack could only hold integers(and only up to the size of address)).
Here the variable size itself is `128` bit.
GDB and LLDB confirms this:
```
(gdb) p ld
$1 = <invalid float value>
(lldb) frame variable ld
(long double) ld = <extracting data from value failed>
```
GCC represents/uses DW_OP_implicit_value in these sort of situations.
Based on the discussion with Jakub Jelinek regarding GCC's motivation
for using this, I concluded that DW_OP_implicit_value is most appropriate
in this case.
Link: https://gcc.gnu.org/pipermail/gcc/2020-July/233057.html
GDB seems happy after this patch:(LLDB doesn't have support
for DW_OP_implicit_value)
```
(gdb) p ld
p ld
$1 = 3.14000000000000012434
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
Theory was that we should never reach a non-type unit (eg: type in an
anonymous namespace) when we're already in the invalid "encountered an
address-use, so stop emitting types for now, until we throw out the
whole type tree to restart emitting in non-type unit" state. But that's
not the case (prior commit cleaned up one reason this wasn't exposed
sooner - but also makes it easier to test/demonstrate this issue)
This reads more like what you'd expect the DWARF to look like (from the
lexical order of C++ - template parameters come before members, etc),
and also happens to make it easier to tickle (& thus test) a bug related
to type units and Split DWARF I'm about to fix.
SUMMARY:
1. in the patch , remove setting storageclass in function .getXCOFFSection and construct function of class MCSectionXCOFF
there are
XCOFF::StorageMappingClass MappingClass;
XCOFF::SymbolType Type;
XCOFF::StorageClass StorageClass;
in the MCSectionXCOFF class,
these attribute only used in the XCOFFObjectWriter, (asm path do not need the StorageClass)
we need get the value of StorageClass, Type,MappingClass before we invoke the getXCOFFSection every time.
actually , we can get the StorageClass of the MCSectionXCOFF from it's delegated symbol.
2. we also change the oprand of branch instruction from symbol name to qualify symbol name.
for example change
bl .foo
extern .foo
to
bl .foo[PR]
extern .foo[PR]
3. and if there is reference indirect call a function bar.
we also add
extern .bar[PR]
Reviewers: Jason liu, Xiangling Liao
Differential Revision: https://reviews.llvm.org/D84765
Allow the GNU .debug_macro extension to be emitted for DWARF versions
earlier than 5. The extension is basically what became DWARF 5's format,
except that a DW_AT_GNU_macros attribute is emitted, and some entries
like the strx entries are missing. In this patch I emit GNU's indirect
entries, which are the same as DWARF 5's strp entries.
This patch adds the extension behind a hidden LLVM flag,
-use-gnu-debug-macro. I would later want to enable it by default when
tuning for GDB and targeting DWARF versions earlier than 5.
The size of a Clang 8.0 binary built with RelWithDebInfo and the flags
"-gdwarf-4 -fdebug-macro" reduces from 1533 MB to 1349 MB with
.debug_macro (compared to 1296 MB without -fdebug-macro).
Reviewed By: SouraVX, dblaikie
Differential Revision: https://reviews.llvm.org/D82975
Broken out from a review comment on D82975. This is an NFC expect for
that the Macinfo macro string is now emitted using a single emitBytes()
invocation, so it can be done using a single string directive.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D83557
Move the Dwarf version checks that determine if the .debug_macro section
should be emitted, into a DwarfDebug member. This is a preparatory
refactoring for allowing the GNU .debug_macro extension, which is a
precursor to the DWARF 5 format, to be emitted by LLVM for earlier DWARF
versions.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D82971
This patch adds the missing information to the LF_BUILDINFO record, which allows for rebuilding a .CPP without any external dependency but the .OBJ itself (other than the compiler).
Some external tools that we are using (Recode, Live++) are extracting the information to reproduce a build without any knowledge of the build system. The LF_BUILDINFO stores a full path to the compiler, the PWD (CWD at program startup), a relative or absolute path to the TU, and the full CC1 command line. The command line needs to be freestanding (not depend on any environment variables). In the same way, MSVC doesn't store the provided command-line, but an expanded version (somehow their equivalent of CC1) which is also freestanding.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
On the frontend side, this patch recovers AIX static init implementation to
use the linkage type and function names Clang chooses for sinit related function.
On the backend side, this patch sets correct linkage and function names on aliases
created for sinit/sterm functions.
Differential Revision: https://reviews.llvm.org/D84534
This also fixes the condition in the assertion in
DwarfCompileUnit::getLabelBegin() because it checked something unrelated
to the returned value.
Differential Revision: https://reviews.llvm.org/D85437
This removes members of the DIEUnit class which were used only in unit
tests. Note also that child classes shadowed some of these methods,
namely, getDwarfVersion() was overridden in DwartfUnit and getLength()
was overridden in DwarfCompileUnit.
Differential Revision: https://reviews.llvm.org/D85436
This patch changes the functionality of AsmPrinter to name the basic block end labels as LBB_END${i}_${j}, with ${i} being the identifier for the function and ${j} being the identifier for the basic block. The new naming scheme is consistent with how basic block labels are named (.LBB${i}_{j}), and how function end symbol are named (.Lfunc_end${i}) and helps to write stronger tests for the upcoming patch for BB-Info section (as proposed in https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html). The end label is used with basicblock-labels (BB-Info section in future) and basicblock-sections to compute the size of basic blocks and basic block sections, respectively. For BB sections, the section containing the entry basic block will not have a BB end label since it already gets the function end-label.
This label is cached for every basic block (CachedEndMCSymbol) like the label for the basic block (CachedMCSymbol).
Differential Revision: https://reviews.llvm.org/D83885
The CFA is calculated as (SP/FP + offset), but when there are
SVE objects on the stack the SP offset is partly scalable and
should instead be expressed as the DWARF expression:
SP + offset + scalable_offset * VG
where VG is the Vector Granule register, containing the
number of 64bits 'granules' in a scalable vector.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84043
The patch restricts DIEDelta::SizeOf() to accept only DWARF forms that
are actually used in the LLVM codebase. This should make the use of the
class more explicit and help to avoid issues similar to fixed in D83958
and D84094.
Differential Revision: https://reviews.llvm.org/D84095
DIELabel can emit only 32- or 64-bit values, while it was created in
some places with DW_FORM_udata, which implies emitting uleb128.
Nevertheless, these places also expected to emit U32 or U64, but just
used a misleading DWARF form. The patch updates those places to use more
appropriate DWARF forms and restricts DIELabel::SizeOf() to accept only
forms that are actually used in the LLVM codebase.
Differential Revision: https://reviews.llvm.org/D84094
DIELocList is used with a limited number of DWARF forms, see the only
place where it is instantiated, DwarfCompileUnit::addLocationList().
The patch marks the unexpected execution path in DIELocList::SizeOf()
as unreachable, to reduce ambiguity.
Differential Revision: https://reviews.llvm.org/D84092
Nico Weber