This extends the code in SearchForAndLoads to be able to look through
ANY_EXTEND nodes, which can be created from mismatching IR types where
the AND node we begin from only demands the low parts of the register.
That turns zext and sext into any_extends as only the low bits are
demanded. To be able to look through ANY_EXTEND nodes we need to handle
mismatching types in a few places, potentially truncating the mask to
the size of the final load.
Recommitted with a more conservative check for the type of the extend.
Differential Revision: https://reviews.llvm.org/D117457
This patch fixes a case where the 'align' parameter attribute on the
pointer operands to llvm.vp.gather and llvm.vp.scatter was being dropped
during the conversion to the SelectionDAG. The default alignment equal
to the ABI type alignment of the vector type was kept. It also updates
the documentation to reflect the fact that the parameter attribute is
now properly supported.
The default alignment of these intrinsics was previously documented as
being equal to the ABI alignment of the *scalar* type, when in fact that
wasn't the case: the ABI alignment of the vector type was used instead.
This has also been fixed in this patch.
Reviewed By: simoll, craig.topper
Differential Revision: https://reviews.llvm.org/D114423
This was noted as a potential cleanup in D117508.
getShiftAmountTy() has checks for vector, phase, etc. so it should
handle anything that the caller was trying to account for.
When widening these intrinsics, we do not have to insert neutral
elements at the end of the vector as when widening vector.reduce.*
intrinsics, thanks to vector predication semantics.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117467
This caused builds to fail with
llvm/lib/CodeGen/SelectionDAG/DAGCombiner.cpp:5638:
bool (anonymous namespace)::DAGCombiner::BackwardsPropagateMask(llvm::SDNode *):
Assertion `NewLoad && "Shouldn't be masking the load if it can't be narrowed"' failed.
See the code review for a link to a reproducer.
> This extends the code in SearchForAndLoads to be able to look through
> ANY_EXTEND nodes, which can be created from mismatching IR types where
> the AND node we begin from only demands the low parts of the register.
> That turns zext and sext into any_extends as only the low bits are
> demanded. To be able to look through ANY_EXTEND nodes we need to handle
> mismatching types in a few places, potentially truncating the mask to
> the size of the final load.
>
> Differential Revision: https://reviews.llvm.org/D117457
This reverts commit 578008789f.
Split vp.reduction.* intrinsics by splitting the vector to reduce in
two halves, perform the reduction operation in each one of them and
accumulate the results of both operations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117469
A possible codegen regression for PowerPC is noted in D117406
because we don't recognize a pattern that demands only 1 byte
from a bswap.
This fold has existed in IR since close to the beginning of LLVM:
https://github.com/llvm/llvm-project/blame/main/llvm/lib/Transforms/InstCombine/InstCombineSimplifyDemanded.cpp#L794
...so this patch copies that code as much as possible and adapts
it for SDAG.
The test for PowerPC that would change in D117406 is over-reduced
with undefs, so I recreated it for AArch64 and x86 by passing in
pointer args and renamed the values to make the logic clearer.
Differential Revision: https://reviews.llvm.org/D117508
This extends the code in SearchForAndLoads to be able to look through
ANY_EXTEND nodes, which can be created from mismatching IR types where
the AND node we begin from only demands the low parts of the register.
That turns zext and sext into any_extends as only the low bits are
demanded. To be able to look through ANY_EXTEND nodes we need to handle
mismatching types in a few places, potentially truncating the mask to
the size of the final load.
Differential Revision: https://reviews.llvm.org/D117457
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
Update code comments in DAGCombiner::ReduceLoadWidth and refactor
the handling of SRL a bit. The refactoring is done with the intent
of adding support for folding away SRA by using SEXTLOAD in a
follow-up patch.
The function is also renamed as DAGCombiner::reduceLoadWidth.
Differential Revision: https://reviews.llvm.org/D117104
Use the AttributeSet constructor instead. There's no good reason
why AttrBuilder itself should exact the AttributeSet from the
AttributeList. Moving this out of the AttrBuilder generally results
in cleaner code.
Original patch by @hussainjk.
This patch was split off from D109377 to keep vector legalization
(widening/splitting) separate from vector element legalization
(promoting).
While the original patch added a third overload of
SelectionDAG::getVPStore, this patch takes the liberty of collapsing
those all down to 1, as three overloads seems excessive for a
little-used node.
The original patch also used ModifyToType in places, but that method
still crashes on scalable vector types. Seeing as the other VP
legalization methods only work when all operands need identical
widening, this patch follows in that vein.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117235
This seems to be a leftover from a long time ago when there was
an ISD::VBIT_CONVERT and a MVT::Vector. It looks like in those days
the vector type was carried in a VTSDNode.
As far as I know, these days ComputeValueTypes would have already
assigned "Result" the same type we're getting from TLI.getValueType
here. Thus the BITCAST is always a NOP. Verified by adding an assert
and running check-llvm.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D117335
This commit sometimes causes a crash when compiling a vtable thunk. E.g.:
clang '--target=aarch64-grtev4-linux-gnu' -xc++ - -c -o /dev/null <<EOF
struct a {
virtual int f();
};
struct c {
virtual int &g() const;
};
struct d : a, c {
int &g() const;
};
int &d::g() const {}
EOF
Some follow-up commits have been reverted as well:
Revert "IR: Make getRetAlign check callee function attributes"
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
This reverts commit 4f414af6a7.
This reverts commit a5507d2e25.
This reverts commit 3d2d208f6a.
This reverts commit 07ddfa95e3.
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/dag-numsignbits.ll
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
This adds support for STRICT_FSETCC(quiet) and STRICT_FSETCCS(signaling).
FEQ matches well to STRICT_FSETCC oeq.
FLT/FLE matches well to STRICT_FSETCCS olt/ole.
Others require commuting operands or multiple instructions.
STRICT_FSETCC olt/ole/ogt/oge/ult/ule/ugt/uge uses FLT/FLE,
but we need to save/restore FFLAGS around them to avoid spurious
exceptions. I've implemented pseudo instructions with a
CustomInserter to insert the save/restore CSR instructions.
Unfortunately, this doesn't honor exceptions for signaling NANs
but I'm not sure if signaling nans are really supported by the
constrained intrinsics.
STRICT_FSETCC one and ueq expand to a pair of FLT instructions
with a save/restore of fflags around each. This could be improved
in the future.
There may be some opportunities to generate better code for strict
comparisons mixed with nonans fast math flags. I've left FIXMEs in
the .td files for that.
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D116694
Completely rework how we handle X constrained labels for inline asm.
X should really be treated as i. Then existing tests can be moved to use
i D115410 and clang can just emit i D115311. (D115410 and D115311 are
callbr, but this can be done for label inputs, too).
Coincidentally, this simplification solves an ICE uncovered by D87279
based on assumptions made during D69868.
This is the third approach considered. See also discussions v1 (D114895)
and v2 (D115409).
Reported-by: kernel test robot <lkp@intel.com>
Fixes: https://github.com/ClangBuiltLinux/linux/issues/1512
Reviewed By: void, jyknight
Differential Revision: https://reviews.llvm.org/D115688
I've changed the definition of the experimental.vector.splice
instrinsic to reject indices that are known to be or possibly
out-of-bounds. In practice, this means changing the definition so that
the index is now only valid in the range [-VL, VL-1] where VL is the
known minimum vector length. We use the vscale_range attribute to
take the minimum vscale value into account so that we can permit
more indices when the attribute is present.
The splice intrinsic is currently only ever generated by the vectoriser,
which will never attempt to splice vectors with out-of-bounds values.
Changing the definition also makes things simpler for codegen since we
can always assume that the index is valid.
This patch was created in response to review comments on D115863
Differential Revision: https://reviews.llvm.org/D115933
This commit fixes a missed opportunity in merging consecutive stores.
The code that searches for stores skipped the case of stores that
directly connect to the root. The comment above the implementation lists
this case but the code did not handle it. I found this pattern when
looking into the shared_ptr destructor. GCC generates the right
sequence. Here is a small repo:
int foo(int* buff) {
buff[0] = 0;
int x = buff[1];
buff[1] = 0;
return x;
}
Differential Revision: https://reviews.llvm.org/D116895
These nodes should saturate to their saturating VT. We can use this
information to know the bits past the VT are all zeros or all sign bits.
I think we might only have test coverage for the unsigned case. I'll
verify and add tests.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D116870
This is the last part of D116531. Fetch the type of the indirect
inline asm operand from the elementtype attribute, rather than
the pointer element type.
Fixes https://github.com/llvm/llvm-project/issues/52928.
Split vp.select in a similar way as vselect, splitting also the length
parameter.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D116651
We can either check the opcode or number of operands or use
ISD::isVPOpcode inside the methods.
In some places I've used number of operands figuring that it is
cheaper than isVPOpcode. I've included isVPOpcode in an assert to
verify.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D116578
Unsigned compares work with either zero extended or sign extended
inputs just like equality comparisons. I didn't allow this when
I refactored the code in D116421 due to lack of tests. But I've
since found a simple C test case that demonstrates when this can be
useful.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D116617
Use the VPIntrinsics.def's LEGALPOS that is specified with every VP
SDNode to determine which return or operand value type shall be used to
infer the legalization action.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D116594
This function returns an upper bound on the number of bits needed
to represent the signed value. Use "Max" to match similar functions
in KnownBits like countMaxActiveBits.
Rename APInt::getMinSignedBits->getSignificantBits. Keeping the old
name around to keep this patch size down. Will do a bulk rename as
follow up.
Rename KnownBits::countMaxSignedBits->countMaxSignificantBits.
Reviewed By: lebedev.ri, RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D116522
This is similar to what is done for targets that prefer zero extend
where we avoid using a zero extend if the promoted values are sign
extended.
We'll also check for zero extended operands for ugt, ult, uge, and ule when the
target prefers sign extend. This is different than preferring zero extend, where
we only check for sign bits on equality comparisons.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D116421
The 'New' only makes sense in the context of these being
output arguments, but they are also used as inputs first.
Drop the 'New' and just call them LHS/RHS.
Factored out of D116421.
This patch adds isel support for STRICT_LRINT/LLRINT/LROUND/LLROUND.
It also adds test cases for f32 and f64 constrained intrinsics that
correspond to the intrinsics in float-intrinsics.ll and
double-intrinsics.ll. Support for promoting the integer argument of
STRICT_FPOWI was added.
I've skipped adding tests for f16 intrinsics, since we don't have libcalls
for them and we have inconsistent support for promoting them in LegalizeDAG.
This will need to be examined more closely.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D116323
getShiftAmountTy used to directly return the shift amount type from
the target which could be too small for large illegal types. For
example, X86 always returns i8.
The code here detected this and used i32 instead if it won't fit. This
behavior was added to getShiftAmountTy in D112469 so we no longer need
this workaround.
Fix issue in TargetLowering::expandROT where we only attempt to flip a rotation if the other direction has better support - this matches TargetLowering::expandFunnelShift
This allows us to enable ISD::ROTR lowering on SSE targets, which particularly simplifies/improves codegen for splat amount and AVX2 per-element shifts.
When the source has a series of assignments, users reasonably want to
have the debugger step through each one individually. Turn off the combine
for adjacent stores so we get this behavior at -O0.
Similar to D7181.
Reviewed By: spatel, xgupta
Differential Revision: https://reviews.llvm.org/D115808
With Control-Flow Integrity (CFI), the LowerTypeTests pass replaces
function references with CFI jump table references, which is a problem
for low-level code that needs the address of the actual function body.
For example, in the Linux kernel, the code that sets up interrupt
handlers needs to take the address of the interrupt handler function
instead of the CFI jump table, as the jump table may not even be mapped
into memory when an interrupt is triggered.
This change adds the no_cfi constant type, which wraps function
references in a value that LowerTypeTestsModule::replaceCfiUses does not
replace.
Link: https://github.com/ClangBuiltLinux/linux/issues/1353
Reviewed By: nickdesaulniers, pcc
Differential Revision: https://reviews.llvm.org/D108478
When the source has a series of assignments, users reasonably want to
have the debugger step through each one individually. Turn off the combine
for adjacent stores so we get this behavior at -O0.
Similar to D7181.
Differential Revision: https://reviews.llvm.org/D115808
Merge the node combines into a common DAGCombiner::visitFMinMax (like we do for IMINMAX).
Move the constant folding into SelectionDAG::foldConstantFPMath.
This allows us to fold the vecreduce-propagate-sd-flags.ll test as it reduces constants - so I've refactored it to take variables instead.
Differential Revision: https://reviews.llvm.org/D115952
We were using a function attribute to indicate a non-standard FP mode,
but now we can use intrinsics for that job as shown in the new tests.
Presumably the x86 asm could be improved for that IR with intrinsics,
but I have not worked out exactly how to do that. Note that the
transform to FTRUNC still requires a hacky check for "nsz" (because
FMF are not applied to FP casts).
This is a cleanup based on the clang change in D115804 / 8c7f2a4f87 .
This is effectively a revert of 5a90285bd9 + D46237 .
Differential Revision: https://reviews.llvm.org/D115885
Replace custom constant scalar/splat folding with FoldConstantArithmetic call and canonicalize commutative constant ops to the RHS before the SimplifyVBinOp call
This extends the custom lowering for truncating stores on
fixed length vectors in SVE to support masked truncating stores.
It also adds a DAG combine for truncates followed by masked
stores.
Reviewed By: peterwaller-arm, paulwalker-arm
Differential Revision: https://reviews.llvm.org/D108115
SimplifyVBinOp still has a FoldConstantArithmetic call, which now it isn't vector specific we should be able to remove (once fp binops are tidied up); but we can at least clean up the integer opcodes to perform the basic constant/undef handling in common code first.
These were detected by the new -Wauto-by-value-copy (D114989) warning, these by-value
constant copies need only be references.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D114990
-(Za + Zm * Zn) != (-Za + Zm * (-Zn))
when the FMA produces a zero output (e.g. all zero inputs can produce -0
output)
Add a PatFrag to check presence of nsz on the fneg, add tests which
ensure the combine does not fire in the absense of nsz.
See https://reviews.llvm.org/D90901 for a similar discussion on X86.
Differential Revision: https://reviews.llvm.org/D109525
This patch fixes an issue during SelectionDAG construction. When the
target is unable to lower the function's return value, a hidden sret
parameter is created. It is initialized and copied to a stored variable
(DemoteRegister) with CopyToReg and is later fetched with
CopyFromReg. The bug is that the chains used for each copy are
inconsistent, and thus in rare cases the scheduler may issue them out of
order.
The fix is to ensure that the CopyFromReg uses the DAG root which is set
as the chain corresponding to the initial CopyToReg.
Fixes https://llvm.org/PR52475
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D114795
Previously we were using UADDO to generate a two-result value with
the unsigned addition and the overflow mask. We then combined the
overflow mask with the trip count comparison to get a result.
However, we don't need to do this - we can simply use a UADDSAT
saturating add node to add the vector index splat and the stepvector
together. Then we can just compare this to a splat of the trip count.
This results in overall better code quality for both Thumb2 and AArch64.
Differential Revision: https://reviews.llvm.org/D115354
There is a pointer to the DataLayout in SelectionDAGBuilder called
'DL' that is hardly ever used. In most cases the code seems to just
use `DAG.getDataLayout()` instead. Given that DL is also often used
as a shadowed variable for the debug location it seems sensible to
just kill off the few remaining uses and be consistent with the rest
of the code.
Differential Revision: https://reviews.llvm.org/D114451
After D113888 / 32b6c17b29 the MMO size of a masked loads/store is
unknown. When we are converting back to a standard load/store because
the mask is known all ones, we can refine that to the correct size from
the size of the vector being loaded/stored.
Differential Revision: https://reviews.llvm.org/D114582
In the style of D113888, this patch updates the various VP memory
operations (load, store, gather, scatter) to use UnknownSize. This is
for the same reason as for masked loads and stores: the number of
elements accessed is not generally known at compile time.
This is somewhat pessimistic in the sense that we may still find
un-canonicalized intrinsics featuring both an all-true mask and an EVL
equal to the vector size. Arguably those should be canonicalized before
the SelectionDAG, so those have been left for future work.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D115036
This patch fixes a case where the 'align' parameter attribute on the
pointer operands to llvm.vp.load and llvm.vp.store was being dropped
during the conversion to the SelectionDAG. The default alignment
equal to the ABI type alignment of the vector type was kept. It also
updates the documentation to reflect the fact that the parameter
attribute is now properly supported.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D114422
As an extension to D111976, this converts clamp fptosi, clamped between
0 and (2^n)-1 to a fptoui.sat. This can greatly help on targets with
conversions that naturally saturate, such as Arm.
X86 disables the transform as some of the test cases increases in size.
A fptoui.sat necessitates a fp clamp without native support, so there is
little use in converting if the instruction is just going to be
expanded.
Differential Revision: https://reviews.llvm.org/D112428
MVE can treat v16i1, v8i1, v4i1 and v2i1 as different views onto the
same 16bit VPR.P0 register, with v2i1 holding two 8 bit values for the
two halves. This was never treated as a legal type in llvm in the past
as there are not many 64bit instructions and no 64bit compares. There
are a few instructions that could use it though, notably a VSELECT (as
it can handle any size using the underlying v16i8 VPSEL), AND/OR/XOR for
similar reasons, some gathers/scatter and long multiplies and VCTP64
instructions.
This patch goes through and makes v2i1 a legal type, handling all the
cases that fall out of that. It also makes VSELECT legal for v2i64 as a
side benefit. A lot of the codegen changes as a result - usually in way
that is a little better or a little worse, but still expensive. Costs
can change a little too in the process, again in a way that expensive
things remain expensive. A lot of the tests that changed are mainly to
ensure correctness - the code can hopefully be improved in the future
where it comes up in practice.
The intrinsics currently remain using the v4i1 they previously did to
emulate a v2i1. This will be changed in a followup patch but this one
was already large enough.
Differential Revision: https://reviews.llvm.org/D114449
This patch begins extending handling for peeking through bitcast nodes to big-endian targets as well as the existing little-endian case.
Differential Revision: https://reviews.llvm.org/D114676
combinePMULH currently only truncates vXi32/vXi64 multiplies to PMULHW/PMULUW if the source operands are SEXT/ZEXT instructions for a 'free' truncation.
But we can generalize this to any source operand with sufficient leading sign/zero bits that would allow PACKS/PACKUS to be used as a 'cheap' truncation.
This helps us avoid the wider multiplies, in exchange for truncation on both source operands instead of the result.
Differential Revision: https://reviews.llvm.org/D113371
The REM DAG combine uses the visitDivLike functions to try and get an
optimized DIV node to provide better codegen, however in some cases this
visitDivLike call ends up in the BuildSDIVPow2 target hook, which in
turn sometimes will return the same node passed in to indicate not to
change it. The REM DAG combine does not anticipate this and creates a
cycle in the DAG because of it.
Fix this by ensuring any such optimized div node returned is distinct
from the node being combined.
Differential Revision: https://reviews.llvm.org/D114716
This adds a fold in DAGCombine to create fptosi_sat from sequences for
smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
to be handled similarly.
A shouldConvertFpToSat method was added to control when converting may
be profitable. The original fptosi will have a less strict semantics
than the fptosisat, with less values that need to produce defined
behaviour.
This especially helps on ARM/AArch64 where the vcvt instructions
naturally saturate the result.
Differential Revision: https://reviews.llvm.org/D111976
It causes builds to fail with this assert:
llvm/include/llvm/ADT/APInt.h:990:
bool llvm::APInt::operator==(const llvm::APInt &) const:
Assertion `BitWidth == RHS.BitWidth && "Comparison requires equal bit widths"' failed.
See comment on the code review.
> This adds a fold in DAGCombine to create fptosi_sat from sequences for
> smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
> the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
> it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
> ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
> to be handled similarly.
>
> A shouldConvertFpToSat method was added to control when converting may
> be profitable. The original fptosi will have a less strict semantics
> than the fptosisat, with less values that need to produce defined
> behaviour.
>
> This especially helps on ARM/AArch64 where the vcvt instructions
> naturally saturate the result.
>
> Differential Revision: https://reviews.llvm.org/D111976
This reverts commit 52ff3b0093.
This adds a fold in DAGCombine to create fptosi_sat from sequences for
smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
to be handled similarly.
A shouldConvertFpToSat method was added to control when converting may
be profitable. The original fptosi will have a less strict semantics
than the fptosisat, with less values that need to produce defined
behaviour.
This especially helps on ARM/AArch64 where the vcvt instructions
naturally saturate the result.
Differential Revision: https://reviews.llvm.org/D111976
Usually dbg.declares get translated into either entries in an MF
side-table, or a DBG_VALUE on entry to the function with IsIndirect set
(including in instruction referencing mode). Much rarer is a dbg.declare
attached to a non-argument value, such as in the test added in this patch
where there's a variable-length-array. Such dbg.declares become SDDbgValue
nodes with InIndirect=true.
As it happens, we weren't correctly emitting DBG_INSTR_REFs with the
additional indirection. This patch adds the extra indirection, encoded as
adding an additional DW_OP_deref to the expression.
Differential Revision: https://reviews.llvm.org/D114440
This allows the generic DAG combine to fold fp_extend/fp_trunc into
loads/stores which we can then lower into a integer extending
load/truncating store plus an FP_EXTEND/FP_ROUND.
The nuance here is that fixed-type FP_EXTEND/FP_ROUND require unpacked
types hence lowering them introduces an unpack/zip. By allowing these
nodes to be combined with loads/store we make it much easier to have
this unpack/zip combined into the load/store by our custom lowering.
Differential Revision: https://reviews.llvm.org/D114580
In most common cases the @llvm.get.active.lane.mask intrinsic maps directly
to the SVE whilelo instruction, which already takes overflow into account.
However, currently in SelectionDAGBuilder::visitIntrinsicCall we always lower
this immediately to a generic sequence of instructions that explicitly
take overflow into account. This makes it very difficult to then later
transform back into a single whilelo instruction. Therefore, this patch
introduces a new TLI function called shouldExpandGetActiveLaneMask that asks if
we should lower/expand this to a sequence of generic ISD nodes, or instead
just leave it as an intrinsic for the target to lower.
You can see the significant improvement in code quality for some of the
tests in this file:
CodeGen/AArch64/active_lane_mask.ll
Differential Revision: https://reviews.llvm.org/D114542
Currently the generic lowering of llvm.get.active.lane.mask is done
in SelectionDAGBuilder::visitIntrinsicCall and currently assumes
only fixed-width vectors are used. This patch changes the code to be
more generic and support scalable vectors too. I have added tests
for SVE here:
CodeGen/AArch64/active_lane_mask.ll
although the code quality leaves a lot to be desired. The code will
be improved significantly in a later patch that makes use of the
SVE whilelo instruction.
Differential Revision: https://reviews.llvm.org/D114541
If we only demand bits from one half of a rotation pattern, see if we can simplify to a logical shift.
For the ARM/AArch64 rev16/32 patterns, I had to drop a fold to prevent srl(bswap()) -> rotr(bswap) -> srl(bswap) infinite loops. I've replaced this with an isel PatFrag which should do the same task.
Reapplied with fix for AArch64 rev patterns to matching the ARM fix.
https://alive2.llvm.org/ce/z/iroxki (rol -> shl by amt iff demanded bits has at least as many trailing zeros as the shift amount)
https://alive2.llvm.org/ce/z/4ez_U- (ror -> shl by revamt iff demanded bits has at least as many trailing zeros as the reverse shift amount)
https://alive2.llvm.org/ce/z/cD7dR- (ror -> lshr by amt iff demanded bits has at least as many leading zeros as the shift amount)
https://alive2.llvm.org/ce/z/_XGHtQ (rol -> lshr by revamt iff demanded bits has at least as many leading zeros as the reverse shift amount)
Differential Revision: https://reviews.llvm.org/D114354
If we only demand bits from one half of a rotation pattern, see if we can simplify to a logical shift.
For the ARM rev16 patterns, I had to drop a fold to prevent srl(bswap()) -> rotr(bswap) -> srl(bswap) infinite loops. I've replaced this with an isel PatFrag which should do the same task.
https://alive2.llvm.org/ce/z/iroxki (rol -> shl by amt iff demanded bits has at least as many trailing zeros as the shift amount)
https://alive2.llvm.org/ce/z/4ez_U- (ror -> shl by revamt iff demanded bits has at least as many trailing zeros as the reverse shift amount)
https://alive2.llvm.org/ce/z/cD7dR- (ror -> lshr by amt iff demanded bits has at least as many leading zeros as the shift amount)
https://alive2.llvm.org/ce/z/_XGHtQ (rol -> lshr by revamt iff demanded bits has at least as many leading zeros as the reverse shift amount)
Differential Revision: https://reviews.llvm.org/D114354
In quite a few places we were calling getCurSDLoc() to get the debug
location, but this is already a local variable `sdl`.
Differential Revision: https://reviews.llvm.org/D114447
Usage and naming of macros in VPIntrinsics.def has been inconsistent. Rename all property macros to VP_PROPERTY_<name>. Use BEGIN/END scope macros to attach properties to vp intrinsics and SDNodes (instead of specifying either directly with the property macro).
A follow-up patch has documentation on how the macros are (intended) to be used.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D114144
A masked load or store will load a potentially unknown number of bytes
from a memory location - that is not generally known at compile time.
They do not necessarily load/store the entire vector width, and treating
them as such can lead to incorrect aliasing information (for example, if
the underlying object is smaller than the size of the vector).
This makes sure that the MMO is given an unknown size to represent this.
which is less accurate that "may load/store from up to 16 bytes", but
less incorrect that "will load/store from 16 bytes".
Differential Revision: https://reviews.llvm.org/D113888
Patch to fix some of the regressions in D77804.
By folding to rotate/funnel-shift by constant amounts for illegal types, we prevent SimplifyDemandedBits from destroying the patterns prematurely, allowing us to use the rotate/funnel-shift legalization that was added in D112443.
Differential Revision: https://reviews.llvm.org/D113192
Fixed the vector type issue that where we used getVectorNumElements()
should be replaced by getVectorElementCount() when lowering these
intrinsics.
This is similar to D94149
Signed-off-by: Eric Tang <tangxingxin1008@gmail.com>
Reviewed By: craig.topper, frasercrmck
Differential Revision: https://reviews.llvm.org/D109809
Don't expand CTTZ if CTPOP or CTLZ is supported on the promoted type.
We have special handling for CTTZ expansion to use those ops with a
small conversion. The setup for that doesn't generate extra code or
large constants so we don't gain anything from expanding early and we
make CTTZ_ZERO_UNDEF codegen worse.
Follow up from post commit feedback on D112268. We don't seem to have
any in tree tests that care about this.
If we have a large enough floating point type that can exactly
represent the integer value, we can convert the value to FP and
use the exponent to calculate the leading/trailing zeros.
The exponent will contain log2 of the value plus the exponent bias.
We can then remove the bias and convert from log2 to leading/trailing
zeros.
This doesn't work for zero since the exponent of zero is zero so we
can only do this for CTLZ_ZERO_UNDEF/CTTZ_ZERO_UNDEF. If we need
a value for zero we can use a vmseq and a vmerge to handle it.
We need to be careful to make sure the floating point type is legal.
If it isn't we'll continue using the integer expansion. We could split the vector
and concatenate the results but that needs some additional work and evaluation.
Differential Revision: https://reviews.llvm.org/D111904
If we've only demanded the 0'th element, and it comes from a (one-use) AND, try to convert the zero_extend_vector_inreg into a mask and constant fold it with the AND.
This change make WidenVecRes_SELECT work for scalable vectors.
This patch is split from [D110319](https://reviews.llvm.org/D110319)
Signed-off-by: Eric Tang <tangxingxin1008@gmail.com>
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D110388
Fixes PR#48678. `X86TargetLowering::getRegForInlineAsmConstraint()` can adjust the register class to match the type, e.g. change `VR128X` to `VR256X` if the type needs 256 bits. However, the function currently returns the unadjusted register and the adjusted register class, e.g. `xmm15` and `VR256X`, which then causes an assertion failure later because the register class does not contain that register. This patch fixes this behavior.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D113834
It's possible that the mask is already a NOT. At least if InstCombine
hasn't canonicalized the input. In that case we will form an ANDN with
X instead of with Y. So we don't need to worry about Y being a constant.
We might need to check that X isn't a constant instead, but we don't
have a test case for that yet.
This fixes a size regression found when trying to enable this combine
for RISCV in D113937.
Differential Revision: https://reviews.llvm.org/D113948
This was noted as a follow-up to D113212 / D113426:
4fc1fc40057e30404c3b11522cfcadhttps://alive2.llvm.org/ce/z/e4o96b
The canonicalization rules for these IR patterns are complicated,
and we were not matching the expected forms in 2 out of the 3
cases. We can make codegen more robust by matching the swapped
forms (and that will also work if these patterns are created late).
(Cond0 s> -1) ? N1 : 0 --> ~(Cond0 s>> BW-1) & N1
https://alive2.llvm.org/ce/z/mGCBrd
This was suggested as a potential enhancement in D113212 (also 7e30404c3b ).
There's an improvement for AArch that could be generalized ( X > -1 --> X >= 0 ).
For x86, we have a counter-acting fold for most cases that turns the shift+not
back into a setcc, so that needs a work-around to get more cases to use "pandn":
D113603
Note that this pattern (and a previous one) are not currently canonical forms
in IR:
https://alive2.llvm.org/ce/z/e4o96b
Adding swapped variants is left as a TODO item here, but is planned as
a near-term follow-up patch.
Differential Revision: https://reviews.llvm.org/D113426
Enable FoldConstantArithmetic to constant fold bitcasted constant build vectors. These have typically been bitcasted for type legalization purposes.
By extracting the raw constant bit data, performing the constant fold, and then casting the constant bit data back to the (legalized) type, we can perform constant folding on integer types after legalization.
This in particular helps 32-bit targets which need to handle vXi64 build vectors - during legalization the (unsupported) i64 elements are split to create a bitcasted v2Xi32 build vector.
Addresses some regressions in D113192.
Differential Revision: https://reviews.llvm.org/D113564
The introduction of this legalization, D111248, forgot to replace the
old chain with the new. This could manifest itself in the old
(illegally-typed) value remaining in the DAG, though the simple test
cases didn't catch this.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D113561
NFC refactor of D113351, pulling out the APInt split/merge code from the BuildVectorSDNode bits extraction into a BuildVectorSDNode::recastRawBits helper. This is to allow us to reuse the code when we're packing constant folded APInt data back together.
This patch fixes a compiler crash when widening scalable-vector loads
and stores which end up breaking down to element-wise store operations.
It does so by providing a way for targets with support for
vector-predicated loads and stores to use those instead. By widening the
operation but maintaining the original effective operation length via
the EVL, only the intended vector elements are loaded or stored.
This method should in theory be possible and even preferred for
fixed-length vector types, but all fixed-length types can be broken down
into their elements, and regardless I have observed regressions in the
generated code when doing so. I believe this is simply due to
VP_LOAD/VP_STORE not being up to par with LOAD/STORE in terms of
optimization. It does improve performance on smaller self-contained
examples, however, so the potential is there.
While the only target that benefits from this is RISCV, the legalization
is generic and so was placed centrally.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D111248
This patch merges FoldConstantVectorArithmetic back into FoldConstantArithmetic.
Like FoldConstantVectorArithmetic we now handle vector ops with any operand count, but we currently still only handle binops for scalar types - this can be improved in future patches - in particular some common unary/trinary ops still have poor constant folding.
There's one change in functionality causing test changes - FoldConstantVectorArithmetic bails early if the build/splat vector isn't all constant (with some undefs) elements, but FoldConstantArithmetic doesn't - it instead attempts to fold the scalar nodes and bails if they fail to regenerate a constant/undef result, allowing some additional identity/undef patterns to be handled.
Differential Revision: https://reviews.llvm.org/D113300
As suggested on D113371, this adds a wrapper to SelectionDAG::ComputeNumSignBits, similar to the llvm::ComputeMinSignedBits wrapper.
I've included some usage, its not exhaustive, just the more obvious cases where the intention is obvious.
Differential Revision: https://reviews.llvm.org/D113396
We have several places where we need to extract the raw bits data from a BUILD_VECTOR node, so consolidate this to a single helper function that handles Undefs and Integer/FP constants, including implicit truncation.
This should make it easier to extend D113202 to handle more constant folding of bitcasted constant data.
Differential Revision: https://reviews.llvm.org/D113351
Currently FoldConstantArithmetic only handles binops, so replacing other uses of FoldConstantVectorArithmetic (in particular for SETCC nodes), still require more work.
This is the 'or' sibling for the fold added with:
D113212
https://alive2.llvm.org/ce/z/tgnp7K
Note that neither of these transforms is poison-safe,
but it does not seem to matter at this level. We have
had the scalar version of D113212 for a long time, so
this is just making optimizer behavior consistent.
We do not have the scalar version of *this* fold,
however, so that is another follow-up.
Another minor step towards merging FoldConstantVectorArithmetic into FoldConstantArithmetic.
We don't use SDNodeFlags in any constant folding inside DAG, so passing the Flags argument is a waste of time - an alternative would be to wire up FoldConstantArithmetic to take SDNodeFlags just-in-case we someday start using it, but we don't have any way to test it and I'd prefer to avoid dead code.
Differential Revision: https://reviews.llvm.org/D113276
(X s< 0) ? Y : 0 --> (X s>> BW-1) & Y
We canonicalize to the icmp+select form in IR, and we already have this fold
for scalar select in SDAG, so I think it's an oversight that we don't have
the fold for vectors. It seems neutral for AArch64 and saves some instructions
on x86.
Whether we should also have the sibling folds for the inverse condition or
all-ones true value may depend on target-specific factors such as whether
there's an "and-not" instruction.
Differential Revision: https://reviews.llvm.org/D113212
NumOps represents the number of elements for vector constant folding, rename this NumElts so in future we can the consistently use NumOps to represent the number of operands of the opcode.
Minor cleanup before trying to begin generalizing FoldConstantArithmetic to support opcodes other than binops.
To constant fold bitwise logic ops where we've legalized constant build vectors to a different type (e.g. v2i64 -> v4i32), this patch adds a basic ability to peek through the bitcasts and perform the constant fold on the inner operands.
The MVE predicate v2i64 regressions will be addressed by future support for basic v2i64 type support.
One of the yak shaving fixes for D113192....
Differential Revision: https://reviews.llvm.org/D113202
Fold (srl (mul (zext i32:$a to i64), i64:c), 32) -> (mulhu $a, $b),
if c can truncate to i32 without loss.
Reviewed By: frasercrmck, craig.topper, RKSimon
Differential Revision: https://reviews.llvm.org/D108129
If the type of a funnel shift needs to be expanded, expand it to two funnel shifts instead of regular shifts. For constant shifts, this doesn't make much difference, but for variable shifts it allows a more optimal lowering.
Also use the optimized funnel shift lowering for rotates.
Alive2: https://alive2.llvm.org/ce/z/TvHDB- / https://alive2.llvm.org/ce/z/yzPept
(Branched from D108058 as getting this completed should help unlock some other WIP patches).
Original Patch: @efriedma (Eli Friedman)
Differential Revision: https://reviews.llvm.org/D112443
Rely on the hasOperation() instead - as commented on D77804, the mid-term intention is to recognise rotate/funnel-by-constant pre-legalization to help avoid SimplifyDemandedBits regressions.
As noted in https://reviews.llvm.org/D90924#inline-1076197
apparently this is a pretty common pattern,
let's not repeat it yet again, but have it in a common place.
There may be some more places where it could be used,
but these are the most obvious ones.
This patch removes an internal failure found in FindMemType and "bubbles
it up" to the users of that method: GenWidenVectorLoads and
GenWidenVectorStores. FindMemType -- renamed findMemType -- now returns
an optional value, returning None if no such type is found.
Each of the aforementioned users now pre-calculates the list of types it
will use to widen the memory access. If the type breakdown is not
possible they will signal a failure, at which point the compiler will
crash as it does currently.
This patch is preparing the ground for alternative legalization
strategies for vector loads and stores, such as using vector-predication
versions of loads or stores.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112000
PromoteIntRes_MLOAD always sets the extension type to `EXTLOAD`, which
results in a sign-extended load. If the type returned by getExtensionType()
for the load being promoted is something other than `NON_EXTLOAD`, we
should instead pass this to getMaskedLoad() as the extension type.
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D112320
Widens the result and first input vector because they have the same size.
The subvector to be inserted is widened in the operand widen function.
Differential Revision: https://reviews.llvm.org/D112187
getShiftAmountTyForConstant is a special helper that changes the
shift amount to i32 if the type chosen by
TargetLowering::getShiftAmountTy can't represent all possible values.
This is needed to satisfy an assert in SelectionDAG::getNode.
It requires additional consideration to know when this helper should be used.
I'm not sure that we are always using it when we should.
This patch merges the getShiftAmountTyForConstant handling into
TargetLowering::getShiftAmountTy so we don't need to think about it
anymore.
Technically this may slightly increase compile times since the majority
of callers of getShiftAmountTy won't need this. Hopefully, this isn't
an issue in practice.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112469
(i8 X ^ 128) & (i8 X s>> 7) --> usubsat X, 128
As suggested in D112085, we can substitute 'xor' with 'add'
in this pattern, and it is logically equivalent:
https://alive2.llvm.org/ce/z/eJtWWC
We canonicalize to 'xor' in IR, but SDAG does not do that
(and it probably should not - https://llvm.org/PR52267 ), so
it is possible to see either pattern in codegen. Note that
'sub' is a another potential pattern, but that is
canonicalized to 'add' in DAGCombiner, so we don't need to
worry about that variation.
Differential Revision: https://reviews.llvm.org/D112377
We might be promoting a large non-power of 2 type and the new type
may need to be split. Once we split it we may have a ctlz/cttz/ctpop
instruction for the split type.
I'm also concerned that we may create large shifts with shift amounts
that are too small.
EXTRACT_SUBVECTOR indices are always constant, we don't need to check for ConstantSDNode, we should just use getConstantOperandVal which will assert for the constant.
Instead of returning a bool to indicate success and a separate
SDValue, return the SDValue and have the callers check if it is
null.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112331
Expanding these requires multiple constants. If we promote during type
legalization when they'll end up getting expanded in LegalizeDAG, we'll
use larger constants. These constants may be harder to materialize.
For example, 64-bit constants on 64-bit RISCV are very expensive.
This is similar to what has already been done to BSWAP and BITREVERSE.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112268
There is no need to return a bool and have an SDValue output
parameter. Just return the SDValue and let the caller check if it
is null.
I have another patch to add more callers of these so I thought
I'd clean up the interface first.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112267
By expanding early it allows the shifts to be custom lowered in
LegalizeVectorOps. Then a DAG combine is able to run on them before
LegalizeDAG handles the BUILD_VECTORS for the masks used.
v16Xi8 shift lowering on X86 requires a mask to be applied to a v8i16
shift. The BITREVERSE expansion applied an AND mask before SHL ops and
after SRL ops. This was done to share the same mask constant for both shifts.
It looks like this patch allows DAG combine to remove the AND mask added
after v16i8 SHL by X86 lowering. This maintains the mask sharing that
BITREVERSE was trying to achieve. Prior to this patch it looks like
we kept the mask after the SHL instead which required an extra constant
pool or a PANDN to invert it.
This is dependent on D112248 because RISCV will end up scalarizing the BSWAP
portion of the BITREVERSE expansion if we don't disable BSWAP scalarization in
LegalizeVectorOps first.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112254
It's better to do the ands, shifts, ors in the vector domain than
to scalarize it and do those operations on each element.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112248
(i8 X ^ 128) & (i8 X s>> 7) --> usubsat X, 128
I haven't found a generalization of this identity:
https://alive2.llvm.org/ce/z/_sriEQ
Note: I was actually looking at the first form of the pattern in that link,
but that's part of a long chain of potential missed transforms in codegen
and IR....that I hope ends here!
The predicates for when this is profitable are a bit tricky. This version of
the patch excludes multi-use but includes custom lowering (as opposed to
legal only).
On x86 for example, we have custom lowering for some vector types, and that
uses umax and sub. So to enable that fold, we need add use checks to avoid
regressions. Even with legal-only lowering, we could see code with extra
reg move instructions for extra uses, so that constraint would have to be
eased very carefully to avoid penalties.
Differential Revision: https://reviews.llvm.org/D112085
When splitting a masked load, `GetDependentSplitDestVTs` is used to get the
MemVTs of the high and low parts. If the masked load is extended, this
may return VTs with different element types which are used to create the
high & low masked load instructions.
This patch changes `GetDependentSplitDestVTs` to ensure we return VTs with
the same element type.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111996
With unoptimized code, we may see lots of stores and spend too much time in mergeTruncStores.
Fixes PR51827.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D111596
Our fallback expansion for CTLZ/CTTZ relies on CTPOP. If CTPOP
isn't legal or custom for a vector type we would scalarize the
CTLZ/CTTZ. This is different than CTPOP itself which would use a
vector expansion.
This patch teaches expandCTLZ/CTTZ to rely on the vector CTPOP
expansion instead of scalarizing. To do this I had to add additional
checks to make sure the operations used by CTPOP expansions are all
supported. Some of the operations were already needed for the CTLZ/CTTZ
expansion.
This is a huge improvement to the RISCV which doesn't have a scalar
ctlz or cttz in the base ISA.
For WebAssembly, I've added Custom lowering to keep the scalarizing
behavior. I've also extended the scalarizing to CTPOP.
Differential Revision: https://reviews.llvm.org/D111919
When inserting a scalable subvector into a scalable vector through
the stack, the index to store to needs to be scaled by vscale.
Before this patch, that didn't yet happen, so it would generate the
wrong offset, thus storing a subvector to the incorrect address
and overwriting the wrong lanes.
For some insert:
nxv8f16 insert_subvector(nxv8f16 %vec, nxv2f16 %subvec, i64 2)
The offset was not scaled by vscale:
orr x8, x8, #0x4
st1h { z0.h }, p0, [sp]
st1h { z1.d }, p1, [x8]
ld1h { z0.h }, p0/z, [sp]
And is changed to:
mov x8, sp
st1h { z0.h }, p0, [sp]
st1h { z1.d }, p1, [x8, #1, mul vl]
ld1h { z0.h }, p0/z, [sp]
Differential Revision: https://reviews.llvm.org/D111633
Inspired by D111968, provide a isNegatedPowerOf2() wrapper instead of obfuscating code with (-Value).isPowerOf2() patterns, which I'm sure are likely avenues for typos.....
Differential Revision: https://reviews.llvm.org/D111998
This is NFC-intended for the callers. Posting in case there are
other potential users that I missed.
I would also use this from VectorCombine in a patch for:
https://llvm.org/PR52178 ( D111901 )
Differential Revision: https://reviews.llvm.org/D111891
The process of widening simple vector loads attempts to use a load of a
wider vector type if the original load is sufficiently aligned to avoid
memory faults.
However this optimization is only legal when performed on fixed-length
vector types. For scalable vector types this is invalid (unless vscale
happens to be 1).
This patch does increase the likelihood of compiler crashes (from
`FindMemType` failing to find a suitable type) but this now better
matches how widening non-simple loads, insufficiently-aligned loads, and
scalable-vector stores are handled.
Patches will be introduced later by which loads and stores can be
widened on targets with support for masked or predicated operations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D111885
This patch adds patterns to match the following with INC/DEC:
- @llvm.aarch64.sve.cnt[b|h|w|d] intrinsics + ADD/SUB
- vscale + ADD/SUB
For some implementations of SVE, INC/DEC VL is not as cheap as ADD/SUB and
so this behaviour is guarded by the "use-scalar-inc-vl" feature flag, which for SVE
is off by default. There are no known issues with SVE2, so this feature is
enabled by default when targeting SVE2.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111441
This reverts commit 3e8d2008f7.
The code removed in this commit is actually required for extracting
fixed types from illegal scalable types, hence this commit causes
assertion failures in such extracts.
The shift libcalls have a shift amount parameter of MVT::i32, but
sometimes ExpandIntRes_Shift may be called with a node whose
second operand is a type that is larger than that. This leads to
an ABI mismatch, and for example causes a spurious zeroing of
a register in RV32 for 64-bit shifts. Note that at present regular
shift intstructions already have their shift amount operand adapted
at SelectionDAGBuilder::visitShift time, and funnelled shifts bypass that.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D110508
Based on the reasoning of D53903, register operands of DBG_VALUE are
invariably treated as RegState::Debug operands. This change enforces
this invariant as part of MachineInstr::addOperand so that all passes
emit this flag consistently.
RegState::Debug is inconsistently set on DBG_VALUE registers throughout
LLVM. This runs the risk of a filtering iterator like
MachineRegisterInfo::reg_nodbg_iterator to process these operands
erroneously when not parsed from MIR sources.
This issue was observed in the development of the llvm-mos fork which
adds a backend that relies on physical register operands much more than
existing targets. Physical RegUnit 0 has the same numeric encoding as
$noreg (indicating an undef for DBG_VALUE). Allowing debug operands into
the machine scheduler correlates $noreg with RegUnit 0 (i.e. a collision
of register numbers with different zero semantics). Eventually, this
causes an assert where DBG_VALUE instructions are prohibited from
participating in live register ranges.
Reviewed By: MatzeB, StephenTozer
Differential Revision: https://reviews.llvm.org/D110105
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
We were previously silently generating incorrect code when extracting a
fixed-width vector from a scalable vector. This is worse than crashing,
since the user will have no indication that this is currently unsupported
behaviour. I have fixed the code to only perform DAG combines when safe
to do so, i.e. the input and output vectors are both fixed-width or
both scalable.
Test added here:
CodeGen/AArch64/sve-extract-scalable-vector.ll
Differential revision: https://reviews.llvm.org/D110624
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
We can use the raw_string_ostream::str() method to perform the implicit flush() and return a reference to the std::string container that we can then wrap inside Twine().
Deriving NoAlias based on having the same index in two BaseIndexOffset
expressions seemed weird (and as shown in the added unittest the
correctness of doing so depended on undocumented pre-conditions that
the user of BaseIndexOffset::computeAliasing would need to take care
of.
This patch removes the code that dereived NoAlias based on indices
being the same. As a compensation, to avoid regressions/diffs in
various lit test, we also add a new check. The new check derives
NoAlias in case the two base pointers are based on two different
GlobalValue:s (neither of them being a GlobalAlias).
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D110256
This fixes a bug detected in DAGCombiner when using global alias
variables. Here is an example:
@foo = global i16 0, align 1
@aliasFoo = alias i16, i16 * @foo
define i16 @bar() {
...
store i16 7, i16 * @foo, align 1
store i16 8, i16 * @aliasFoo, align 1
...
}
BaseIndexOffset::computeAliasing would incorrectly derive NoAlias
for the two accesses in the example above, resulting in DAGCombiner
miscompiles.
This patch fixes the problem by a defensive approach letting
BaseIndexOffset::computeAliasing return false, i.e. that the aliasing
couldn't be determined, when comparing two global values and at least
one is a GlobalAlias. In the future we might improve this with a
deeper analysis to look at the aliasee for the GlobalAlias etc. But
that is a bit more complicated considering that we could have
'local_unnamed_addr' and situations with several 'alias' variables.
Fixes PR51878.
Differential Revision: https://reviews.llvm.org/D110064
This is a port of the feature that allows the StackProtector pass to omit
checking code for stack canary checks, and rely on SelectionDAG to do it at a
later stage. The reasoning behind this seems to be to prevent the IR checking
instructions from hindering tail-call optimizations during codegen.
Here we allow GlobalISel to also use that scheme. Doing so requires that we
do some analysis using some factored-out code to determine where to generate
code for the epilogs.
Not every case is handled in this patch since we don't have support for all
targets that exercise different stack protector schemes.
Differential Revision: https://reviews.llvm.org/D98200
Stop using APInt constructors and methods that were soft-deprecated in
D109483. This fixes all the uses I found in llvm, except for the APInt
unit tests which should still test the deprecated methods.
Differential Revision: https://reviews.llvm.org/D110807
One of the cases identified in PR45116 - we don't need to limit extracted loads to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
I've also cleaned up the alignment calculation code - if we have a constant extraction index then the alignment can be based on an offset from the original vector load alignment, but for non-constant indices we should assume the worst (single element alignment only).
Differential Revision: https://reviews.llvm.org/D110486
Some vectors require both widening and promotion for their legalization.
This case is not yet handled in getCopyToPartsVector and falls back
on scalarizing by default. BBecause scalable vectors can't easily be
scalarised, we need to implement this in two separate stages:
1. Widen the vector.
2. Promote the vector.
As part of this patch, PromoteIntRes_CONCAT_VECTORS also needed to be
made scalable aware. Instead of falling back on scalarizing the vector
(fixed-width only), each sub-part of the CONCAT vector is promoted,
and the operation is performed on the type with the widest element type,
finally truncating the result to the promoted result type.
Differential Revision: https://reviews.llvm.org/D110646
While these functions are only used in one location in upstream,
it has been reused in multiple downstreams. Restore this file to
a globally visibile location (outside of APInt.h) to eliminate
donwstream breakage and enable potential future reuse.
Additionally, this patch renames types and cleans up
clang-tidy issues.
The legalizer handles this by breaking up an EXTRACT_SUBVECTOR into
smaller parts, and combines those together, padding the result with
UNDEF vectors, e.g.
nxv6i64 extract_subvector(nxv12i64, 6)
<->
nxv8i64 concat(
nxv2i64 extract_subvector(nxv16i64, 6)
nxv2i64 extract_subvector(nxv16i64, 8)
nxv2i64 extract_subvector(nxv16i64, 10)
nxv2i64 undef)
Reviewed By: frasercrmck, david-arm
Differential Revision: https://reviews.llvm.org/D110253
Comment says:
// If the operand is larger than the shift count type but the shift
// count type has enough bits to represent any shift value ...
It clearly talks about the shifted operand, not the shift-amount operand,
but the comparison is performed against Log2_32_Ceil(Op2.getValueSizeInBits())
where Op2 is the shift amount operand. This comparison also doesn't make
sense in the context of the previous one (ShiftsSize > Op2Size) because
Op2Size == Op2.getValueSizeInBits(). Fix to use Op1.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D110509
To avoid using the AST when emitting diagnostics, split the "dontcall"
attribute into "dontcall-warn" and "dontcall-error", and also add the
frontend attribute value as the LLVM attribute value. This gives us all
the information to report diagnostics we need from within the IR (aside
from access to the original source).
One downside is we directly use LLVM's demangler rather than using the
existing Clang diagnostic pretty printing of symbols.
Previous revisions didn't properly declare the new dependencies.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D110364
To avoid using the AST when emitting diagnostics, split the "dontcall"
attribute into "dontcall-warn" and "dontcall-error", and also add the
frontend attribute value as the LLVM attribute value. This gives us all
the information to report diagnostics we need from within the IR (aside
from access to the original source).
One downside is we directly use LLVM's demangler rather than using the
existing Clang diagnostic pretty printing of symbols.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D110364
This patch adds a generic DAGCombine for vector-predicated (VP) nodes.
Those for which we can determine that no vector element is active can be
replaced by either undef or, for reductions, the start value.
This is tested rather trivially at the IR level, where it's possible
that we want to teach instcombine to perform this optimization.
However, we can also see the zero-evl case arise during SelectionDAG
legalization, when wide VP operations can be split into two and the
upper operation emerges as trivially false.
It's possible that we could perform this optimization "proactively"
(both on legal vectors and before splitting) and reduce the width of an
operation and insert it into a larger undef vector:
```
v8i32 vp_add x, y, mask, 4
->
v8i32 insert_subvector (v8i32 undef), (v4i32 vp_add xsub, ysub, mask, 4), i32 0
```
This is somewhat analogous to similar vector narrow/widening
optimizations, but it's unclear at this point whether that's beneficial
to do this for VP ops for any/all targets.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D109148
One of the cases identified in PR45116 - we don't need to limit store narrowing to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory access by checking allowsMisalignedMemoryAccesses as a fallback.
This patch adds codegen support for lowering the vector-predicated
reduction intrinsics to RVV instructions. The process is similar to that
of the other reduction intrinsics, save for the fact that every VP
reduction has a start value. We reuse the existing custom "VL" nodes,
adding extra patterns where required to handle non-true masks.
To support these nodes, the `RISCVISD::VECREDUCE_*_VL` nodes have been
given an explicit "merge" operand. This is to faciliate the VP
reductions, where we must be careful to ensure that even if no operation
is performed (when VL=0) we still produce the start value. The RVV
reductions don't update the destination register under these conditions,
so we tie the splatted start value to the output register.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D107657
This code seems untested and is likely obsolete, because this case
should already be handled by the code that legalizes the result type
of EXTRACT_SUBVECTOR.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D110061
This is required to codegen something like:
<vscale x 8 x i16> @llvm.experimental.vector.insert(<vscale x 8 x i16> %vec,
<vscale x 2 x i16> %subvec,
i64 %idx)
where the output vector is legal, but the input vector needs promoting.
It implements this by performing the whole operation on the promoted type,
and then truncating the result.
Reviewed By: david-arm, craig.topper
Differential Revision: https://reviews.llvm.org/D110059
Most of the code wasn't yet scalable safe, although most of the
code conceptually just works for scalable vectors. This change
makes the algorithm work on ElementCount, where appropriate,
and leaves the fixed-width only code to use `getFixedNumElements`.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D110058
getMetadata() currently uses a weird API where it populates a
structure passed to it, and optionally merges into it. Instead,
we can return the AAMDNodes and provide a separate merge() API.
This makes usages more compact.
Differential Revision: https://reviews.llvm.org/D109852
The fmul is a canonicalizing operation, and fneg is not so this would
break denormals that need flushing and also would not quiet signaling
nans. Fold to fsub instead, which is also canonicalizing.
APInt is used to describe a bit mask in a variety of value tracking and demanded bits/elts functions.
When traversing through dst/src operands, we have a number of places where these masks need to widened/narrowed to translate through bitcasts, reductions etc. to a different type.
This patch add a APIntOps::ScaleBitMask common helper, adds unit test coverage, and updates a number of cases to use the the helper instead of their own implementation.
This came up on D109065 where we currently have to add yet another implementation of the same code.
Differential Revision: https://reviews.llvm.org/D109683
This extends the custom lowering for extending loads on
fixed length vectors in SVE to support masked extending loads.
The existing tests for correct behaviour of masked extending loads
exhibit bad code generation due to the legalistaion of i1 vectors.
They have been left as-is and new tests have been added that do not
exhibit this behaviour.
Differential Revision: https://reviews.llvm.org/D108200
This patch implements legalization of EXTRACT_SUBVECTOR for the case
where the result needs promoting, and the input type requires widening.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D109509
This patch implements legalization of EXTRACT_SUBVECTOR for the case
where the result needs promoting, and the input type is either legal
or requires splitting.
The idea is that the operation is broken down into simpler steps,
by first extracting a smaller subvector until the input vector
becomes legal or requires promotion.
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D109313
Soft deprecrate isNullValue/isAllOnesValue and update in tree
callers. This matches the changes to the APInt interface from
D109483.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D109535
Follow up to suggestions in D109103 via hans:
I think UnreachableDefault (or UnreachableFallthrough) would be a
better name now, since it doesn't just omit the range check, it also
omits the last bit test.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D109455
This renames the primary methods for creating a zero value to `getZero`
instead of `getNullValue` and renames predicates like `isAllOnesValue`
to simply `isAllOnes`. This achieves two things:
1) This starts standardizing predicates across the LLVM codebase,
following (in this case) ConstantInt. The word "Value" doesn't
convey anything of merit, and is missing in some of the other things.
2) Calling an integer "null" doesn't make any sense. The original sin
here is mine and I've regretted it for years. This moves us to calling
it "zero" instead, which is correct!
APInt is widely used and I don't think anyone is keen to take massive source
breakage on anything so core, at least not all in one go. As such, this
doesn't actually delete any entrypoints, it "soft deprecates" them with a
comment.
Included in this patch are changes to a bunch of the codebase, but there are
more. We should normalize SelectionDAG and other APIs as well, which would
make the API change more mechanical.
Differential Revision: https://reviews.llvm.org/D109483
This moves one mid-size function out of line, inlines the
trivial tcAnd/tcOr/tcXor/tcComplement methods into their only
caller, and moves the magic/umagic functions into SelectionDAG
since they are implementation details of its algorithm. This
also removes the unit tests for magic, but these are already
tested in the divide lowering logic for various targets.
This also upgrades some C style comments to C++.
Differential Revision: https://reviews.llvm.org/D109476
Otherwise we end up with an extra conditional jump, following by an
unconditional jump off the end of a function. ie.
bb.0:
BT32rr ..
JCC_1 %bb.4 ...
bb.1:
BT32rr ..
JCC_1 %bb.2 ...
JMP_1 %bb.3
bb.2:
...
bb.3.unreachable:
bb.4:
...
Should be equivalent to:
bb.0:
BT32rr ..
JCC_1 %bb.4 ...
JMP_1 %bb.2
bb.1:
bb.2:
...
bb.3.unreachable:
bb.4:
...
This can occur since at the higher level IR (Instruction) SwitchInsts
are required to have BBs for default destinations, even when it can be
deduced that such BBs are unreachable.
For most programs, this isn't an issue, just wasted instructions since the
unreachable has been statically proven.
The x86_64 Linux kernel when built with CONFIG_LTO_CLANG_THIN=y fails to
boot though once D106056 is re-applied. D106056 makes it more likely
that correlation-propagation (CVP) can deduce that the default case of
SwitchInsts are unreachable. The x86_64 kernel uses a binary post
processor called objtool, which emits this warning:
vmlinux.o: warning: objtool: cfg80211_edmg_chandef_valid()+0x169: can't
find jump dest instruction at .text.cfg80211_edmg_chandef_valid+0x17b
I haven't debugged precisely why this causes a failure at boot time, but
fixing this very obvious jump off the end of the function fixes the
warning and boot problem.
Link: https://bugs.llvm.org/show_bug.cgi?id=50080
Fixes: https://github.com/ClangBuiltLinux/linux/issues/679
Fixes: https://github.com/ClangBuiltLinux/linux/issues/1440
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D109103
This patch extends the preliminary support for vector-predicated (VP)
operation legalization to include promotion of illegal integer vector
types.
Integer promotion of binary VP operations is relatively simple and
piggy-backs on the non-VP logic, but passing the two extra mask and VP
operands through to the promoted operation.
Tests have been added to the RISC-V target to cover the basic scenarios
for integer promotion for both fixed- and scalable-vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D108288
This patch adds support for the vector-predicated `VP_STORE` and
`VP_LOAD` nodes. We do this in the same way we lower `MSTORE` and
`MLOAD`: to regular load/store instructions via intrinsics.
One necessary change was made to `SelectionDAGLegalize` so that
`VP_STORE` nodes' operation actions are taken from the stored "value"
operands, in the same vein as `STORE` or `MSTORE`.
Reviewed By: craig.topper, rogfer01
Differential Revision: https://reviews.llvm.org/D108999
This patch adds support for the `VP_SCATTER` and `VP_GATHER` nodes by
lowering them to RVV's `vsox`/`vlux` instructions, respectively. This
process is almost identical to the existing `MSCATTER`/`MGATHER` support.
One extra change was made to `SelectionDAGLegalize` so that
`VP_SCATTER`'s operation action is derived from its stored "value"
operand rather than its return type (which is always the chain).
Reviewed By: craig.topper, rogfer01
Differential Revision: https://reviews.llvm.org/D108987
In case of a virtual register tied to a phys-def, the register class needs to
be computed. Make sure that this works generally also with fast regalloc by
using TLI.getRegClassFor() whenever possible, and make only the case of
'Untyped' use getMinimalPhysRegClass().
Fixes https://bugs.llvm.org/show_bug.cgi?id=51699.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D109291
Given a select_cc producing a constant and a invertion of the constant
for a comparison more than zero, we can produce an xor with ashr
instead, which produces smaller code. The ashr either sets all bits or
clear all bits depending on if the value is negative. This is then xor'd
with the constant to optionally negate the value.
https://alive2.llvm.org/ce/z/DTFaBZ
This includes a OneUseCheck on the Cmp, which seems to make thinks a
little worse and will be removed in a followup.
Differential Revision: https://reviews.llvm.org/D109149
Pulled out of D109149, this folds set_cc seteq (ashr X, BW-1), -1 ->
set_cc setlt X, 0 to prevent some regressions later on when folding
select_cc setgt X, -1, C, ~C -> xor (ashr X, BW-1), C
Differential Revision: https://reviews.llvm.org/D109214
This add support for SjLj using Wasm exception handling instructions:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/exception-handling/Exceptions.md
This does not yet support the mixed use of EH and SjLj within a
function. It will be added in a follow-up CL.
This currently passes all SjLj Emscripten tests for wasm0/1/2/3/s,
except for the below:
- `test_longjmp_standalone`: Uses Node
- `test_dlfcn_longjmp`: Uses NodeRAWFS
- `test_longjmp_throw`: Mixes EH and SjLj
- `test_exceptions_longjmp1`: Mixes EH and SjLj
- `test_exceptions_longjmp2`: Mixes EH and SjLj
- `test_exceptions_longjmp3`: Mixes EH and SjLj
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D108960
Please refer to
https://lists.llvm.org/pipermail/llvm-dev/2021-September/152440.html
(and that whole thread.)
TLDR: the original patch had no prior RFC, yet it had some changes that
really need a proper RFC discussion. It won't be productive to discuss
such an RFC, once it's actually posted, while said patch is already
committed, because that introduces bias towards already-committed stuff,
and the tree is potentially in broken state meanwhile.
While the end result of discussion may lead back to the current design,
it may also not lead to the current design.
Therefore i take it upon myself
to revert the tree back to last known good state.
This reverts commit 4c4093e6e3.
This reverts commit 0a2b1ba33a.
This reverts commit d9873711cb.
This reverts commit 791006fb8c.
This reverts commit c22b64ef66.
This reverts commit 72ebcd3198.
This reverts commit 5fa6039a5f.
This reverts commit 9efda541bf.
This reverts commit 94d3ff09cf.
This patch extends D107904's introduction of vector-predicated (VP)
operation legalization to include vector splitting.
When the result of a binary VP operation needs splitting, all of its
operands are split in kind. The two operands and the mask are split as
usual, and the vector-length parameter EVL is "split" such that the low
and high halves each execute the correct number of elements.
Tests have been added to the RISC-V target to show splitting several
scenarios for fixed- and scalable-vector types. Without support for
`umax` (e.g. in the `B` extension) the generated code starts to branch.
Ideally a cost model would prevent their insertion in the first place.
Through these tests many opportunities for better codegen can be seen:
combining known-undef VP operations and for constant-folding operations
on `ISD::VSCALE`, to name but a few.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D107957
I believe, the profitability reasoning here is correct
"sub"reg is already located within the 0'th subreg of wider reg,
so if we have suvector insertion at index 0 into undef,
then it's always free do to.
After this, D109065 finally avoids the regression in D108382.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D109074
Followup to D99355: SDAG support for vector-predicated load/store/gather/scatter.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D105871
Instead of splitting off the fp16 to float conversion and generating
a libcall, we should split the operation into fp16 to float and float
to integer operations. This will allow the float to integer conversion
to go through any custom handling the target has. If the target doesn't
have custom handling then we should come back to ExpandIntRes_FP_TO_SINT/
ExpandIntRes_FP_TO_UINT automatically to create the libcall.
This avoids generating libcalls on 32-bit X86. These library functions may
not exist in 32-bit libgcc. At least for LLVM, we never generate them when
hardware floating point instructions are available.
Differential Revision: https://reviews.llvm.org/D108933
When expanding a SMULFIXSAT ISD node (usually originating from
a smul.fix.sat intrinsic) we've applied some optimizations for
the special case when the scale is zero. The idea has been that
it would be cheaper to use an SMULO instruction (if legal) to
perform the multiplication and at the same time detect any overflow.
And in case of overflow we could use some SELECT:s to replace the
result with the saturated min/max value. The only tricky part
is to know if we overflowed on the min or max value, i.e. if the
product is positive or negative. Unfortunately the implementation
has been incorrect as it has looked at the product returned by the
SMULO to determine the sign of the product. In case of overflow that
product is truncated and won't give us the correct sign bit.
This patch is adding an extra XOR of the multiplication operands,
which is used to determine the sign of the non truncated product.
This patch fixes PR51677.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D108938
The check for whether a rotate is possible occurs before the
memory legality checks for the integer type. So it's possible we
decide we can use a rotate, but then fail the legality checks. If
that happens we should not fall back to a vector type. This triggers
an assertion in the rotate handling when it finds a vector type
instead of an integer type.
In theory we could use a shufflevector in place of the rotate, but
right now I'd just like to fix the crash.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D108839
Without this change only the preferred fusion opcode is tested
when attempting to combine FMA operations.
If both FMA and FMAD are available then FMA ops formed prior to
legalization will not be merged post legalization as FMAD becomes
the preferred fusion opcode.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D108619
We can halve the number of mask constants by masking before shl
and after srl.
This can reduce the number of mov immediate or constant
materializations. Or reduce the number of constant pool loads
for X86 vectors.
I think we might be able to do something similar for bswap. I'll
look at it next.
Differential Revision: https://reviews.llvm.org/D108738
This is another bug exposed by https://llvm.org/PR51612
(and the one that triggered the initial assertion) in the report.
That example was suppressed with:
985b48f183
...but these would still crash because we created nodes
like UADDO without the expected 2 output values.
There are 2 bugs here:
1. We were not checking uses of operand 2 (the false value of the select).
2. We were not checking for multiple uses of nodes that produce >1 result.
Correcting those is enough to avoid the crash in the reduced test based on:
https://llvm.org/PR51612
The additional use check on operand 0 (the condition value of the select)
should not strictly be necessary because we are only replacing one use
with another (whether it makes performance sense to do the transform with
that pattern is not clear). But as noted in the TODO, changing that
uncovers another bug.
Note: there's at least one more bug here - we aren't propagating EVTs
correctly, but I plan to fix that in another patch.
Add support for the GNU C style __attribute__((error(""))) and
__attribute__((warning(""))). These attributes are meant to be put on
declarations of functions whom should not be called.
They are frequently used to provide compile time diagnostics similar to
_Static_assert, but which may rely on non-ICE conditions (ie. relying on
compiler optimizations). This is also similar to diagnose_if function
attribute, but can diagnose after optimizations have been run.
While users may instead simply call undefined functions in such cases to
get a linkage failure from the linker, these provide a much more
ergonomic and actionable diagnostic to users and do so at compile time
rather than at link time. Users instead may be able use inline asm .err
directives.
These are used throughout the Linux kernel in its implementation of
BUILD_BUG and BUILD_BUG_ON macros. These macros generally cannot be
converted to use _Static_assert because many of the parameters are not
ICEs. The Linux kernel still needs to be modified to make use of these
when building with Clang; I have a patch that does so I will send once
this feature is landed.
To do so, we create a new IR level Function attribute, "dontcall" (both
error and warning boil down to one IR Fn Attr). Then, similar to calls
to inline asm, we attach a !srcloc Metadata node to call sites of such
attributed callees.
The backend diagnoses these during instruction selection, while we still
know that a call is a call (vs say a JMP that's a tail call) in an arch
agnostic manner.
The frontend then reconstructs the SourceLocation from that Metadata,
and determines whether to emit an error or warning based on the callee's
attribute.
Link: https://bugs.llvm.org/show_bug.cgi?id=16428
Link: https://github.com/ClangBuiltLinux/linux/issues/1173
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D106030
InstrRefBasedLDV is marginally slower than VarlocBasedLDV when analysing
optimised code -- however, it's much slower when analysing code compiled
-O0.
To avoid this: don't use instruction referencing for -O0 functions. In the
"pure" case of unoptimised code, this won't really harm the debugging
experience because most variables won't have been promoted off the stack,
so can't go missing. It becomes more complicated when optimised code is
inlined into functions marked optnone; however these are rare, and as -O0
doesn't run many optimisations there should be little damage to the debug
experience as a result.
I've taken the opportunity to refactor testing for instruction-referencing
into a MachineFunction method, which seems the most appropriate place to
put it.
Differential Revision: https://reviews.llvm.org/D108585
For ISD::EXTRACT_SUBVECTOR, its second operand must be a constant
multiple of the known-minimum vector length of the result type.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D107795
One of the cases identified in PR45116 - we don't need to limit load combines to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
One of the cases identified in PR45116 - we don't need to limit load combines (in this case for fp->int load/store copies) to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
Differential Revision: https://reviews.llvm.org/D108318
One of the cases identified in PR45116 - we don't need to limit load combines (in this case for ISD::BUILD_PAIR) to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
This helps in particular for 32-bit X86 cases loading 64-bit size data, reducing codegen diffs vs x86_64.
Differential Revision: https://reviews.llvm.org/D108307
This changes the lowering of saddsat and ssubsat so that instead of
using:
r,o = saddo x, y
c = setcc r < 0
s = c ? INTMAX : INTMIN
ret o ? s : r
into using asr and xor to materialize the INTMAX/INTMIN constants:
r,o = saddo x, y
s = ashr r, BW-1
x = xor s, INTMIN
ret o ? x : r
https://alive2.llvm.org/ce/z/TYufgD
This seems to reduce the instruction count in most testcases across most
architectures. X86 has some custom lowering added to compensate for
cases where it can increase instruction count.
Differential Revision: https://reviews.llvm.org/D105853
Previously we pre-calculated this and cached it for every
instruction in the function. Most of the calculated results will
never be used. So instead calculate it only on the first use, and
then cache it.
The cache was originally added to fix a compile time issue which
caused r216066 to be reverted.
This change exposed that we weren't pre-computing the Value for
Arguments. I've explicitly disabled that for now as it seemed to
regress some tests on AArch64 which has sext built into its compare
instructions.
Spotted while investigating how to improve heuristics to work better
with RISCV preferring sign extend for unsigned compares for i32 on RV64.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D107976
This patch adds the beginnings of more thorough support in the
legalizers for vector-predicated (VP) operations.
The first step is the ability to widen illegal vectors. The more
complicated scenario in which the result/operands need widening but the
mask doesn't has not been handled here. That would require a lot of code
without an in-tree target on which to test it.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D107904
This patch adds vector-predicated ("VP") reduction intrinsics corresponding to
each of the existing unpredicated `llvm.vector.reduce.*` versions. Unlike the
unpredicated reductions, all VP reductions have a start value. This start value
is returned when the no vector element is active.
Support for expansion on targets without native vector-predication support is
included.
This patch is based on the ["reduction
slice"](https://reviews.llvm.org/D57504#1732277) of the LLVM-VP reference patch
(https://reviews.llvm.org/D57504).
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104308
Follow-up to D107068, attempt to fold nested concat_vectors/undefs, as long as both the vector and inner subvector types are legal.
This exposed the same issue in ARM's MVE LowerCONCAT_VECTORS_i1 (raised as PR51365) and AArch64's performConcatVectorsCombine which both assumed concat_vectors only took 2 subvector operands.
Differential Revision: https://reviews.llvm.org/D107597
visitEXTRACT_SUBVECTOR can sometimes create illegal BITCASTs when
removing "redundant" INSERT_SUBVECTOR operations. This patch adds
an extra check to ensure such combines only occur after operation
legalisation if any resulting BITBAST is itself legal.
Differential Revision: https://reviews.llvm.org/D108086
AttributeList::hasAttribute() is confusing, use clearer methods like
hasParamAttr()/hasRetAttr().
Add hasRetAttr() since it was missing from AttributeList.
We were calling find and then using operator[]. Instead keep the
iterator from find and use it to get the value.
Just happened to notice while investigating how we decide what extends
to use between basic blocks.
This patch refactors / simplifies salvageDebugInfoImpl(). The goal
here is to simplify the implementation of coro::salvageDebugInfo() in
a followup patch.
1. Change the return value to I.getOperand(0). Currently users of
salvageDebugInfoImpl() assume that the first operand is
I.getOperand(0). This patch makes this information explicit. A
nice side-effect of this change is that it allows us to salvage
expressions such as add i8 1, %a in the future.
2. Factor out the creation of a DIExpression and return an array of
DIExpression operations instead. This change allows users that
call salvageDebugInfoImpl() in a loop to avoid the costly
creation of temporary DIExpressions and to defer the creation of
a DIExpression until the end.
This patch does not change any functionality.
rdar://80227769
Differential Revision: https://reviews.llvm.org/D107383
This commit adds the isnan intrinsic and provides a default expansion
for it in the SDAG. However, it makes the assumption that types
it operates on are IEEE-compliant types. This is not always the case.
An example of that is PPC "double double" which has a representation
that
- Does not need to conform to IEEE requirements for isnan as it is
not an IEEE-compliant type
- Does not have a representation that allows for straightforward
reinterpreting as an integer and use of integer operations
The result was that this commit broke __builtin_isnan for ppc_fp128
making many valid numeric values report a NaN.
This patch simply changes the expansion to always expand to unordered
comparison (regardless of whether FP exceptions are tracked). This
is inline with previous semantics.
This isn't optimal, but prevents crashing when the libcall isn't
available. It just calculates the full product and makes sure the high bits
match the sign of the low half. Each of the pieces should go through their own
type legalization.
This can make D107420 unnecessary.
Needs tests, but I wanted to start discussion about D107420.
Reviewed By: FreddyYe
Differential Revision: https://reviews.llvm.org/D107581
This is recommit of the patch 16ff91ebcc,
reverted in 0c28a7c990 because it had
an error in call of getFastMathFlags (base type should be FPMathOperator
but not Instruction). The original commit message is duplicated below:
Clang has builtin function '__builtin_isnan', which implements C
library function 'isnan'. This function now is implemented entirely in
clang codegen, which expands the function into set of IR operations.
There are three mechanisms by which the expansion can be made.
* The most common mechanism is using an unordered comparison made by
instruction 'fcmp uno'. This simple solution is target-independent
and works well in most cases. It however is not suitable if floating
point exceptions are tracked. Corresponding IEEE 754 operation and C
function must never raise FP exception, even if the argument is a
signaling NaN. Compare instructions usually does not have such
property, they raise 'invalid' exception in such case. So this
mechanism is unsuitable when exception behavior is strict. In
particular it could result in unexpected trapping if argument is SNaN.
* Another solution was implemented in https://reviews.llvm.org/D95948.
It is used in the cases when raising FP exceptions by 'isnan' is not
allowed. This solution implements 'isnan' using integer operations.
It solves the problem of exceptions, but offers one solution for all
targets, however some can do the check in more efficient way.
* Solution implemented by https://reviews.llvm.org/D96568 introduced a
hook 'clang::TargetCodeGenInfo::testFPKind', which injects target
specific code into IR. Now only SystemZ implements this hook and it
generates a call to target specific intrinsic function.
Although these mechanisms allow to implement 'isnan' with enough
efficiency, expanding 'isnan' in clang has drawbacks:
* The operation 'isnan' is hidden behind generic integer operations or
target-specific intrinsics. It complicates analysis and can prevent
some optimizations.
* IR can be created by tools other than clang, in this case treatment
of 'isnan' has to be duplicated in that tool.
Another issue with the current implementation of 'isnan' comes from the
use of options '-ffast-math' or '-fno-honor-nans'. If such option is
specified, 'fcmp uno' may be optimized to 'false'. It is valid
optimization in general, but it results in 'isnan' always returning
'false'. For example, in some libc++ implementations the following code
returns 'false':
std::isnan(std::numeric_limits<float>::quiet_NaN())
The options '-ffast-math' and '-fno-honor-nans' imply that FP operation
operands are never NaNs. This assumption however should not be applied
to the functions that check FP number properties, including 'isnan'. If
such function returns expected result instead of actually making
checks, it becomes useless in many cases. The option '-ffast-math' is
often used for performance critical code, as it can speed up execution
by the expense of manual treatment of corner cases. If 'isnan' returns
assumed result, a user cannot use it in the manual treatment of NaNs
and has to invent replacements, like making the check using integer
operations. There is a discussion in https://reviews.llvm.org/D18513#387418,
which also expresses the opinion, that limitations imposed by
'-ffast-math' should be applied only to 'math' functions but not to
'tests'.
To overcome these drawbacks, this change introduces a new IR intrinsic
function 'llvm.isnan', which realizes the check as specified by IEEE-754
and C standards in target-agnostic way. During IR transformations it
does not undergo undesirable optimizations. It reaches instruction
selection, where is lowered in target-dependent way. The lowering can
vary depending on options like '-ffast-math' or '-ffp-model' so the
resulting code satisfies requested semantics.
Differential Revision: https://reviews.llvm.org/D104854
We don't have real demanded bits support for MULHU, but we can
still use the known bits based constant folding support at the end
of SimplifyDemandedBits to simplify a MULHU. This helps with cases
where we know the LHS and RHS have enough leading zeros so that
the high multiply result is always 0.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D106471
IR typically creates INSERT_SUBVECTOR patterns as a widening of the subvector with undefs to pad to the destination size, followed by a shuffle for the actual insertion - SelectionDAGBuilder has to do something similar for shuffles when source/destination vectors are different sizes.
This combine attempts to recognize these patterns by looking for a shuffle of a subvector (from a CONCAT_VECTORS) that starts at a modulo of its size into an otherwise identity shuffle of the base vector.
This uncovered a couple of target-specific issues as we haven't often created INSERT_SUBVECTOR nodes in generic code - aarch64 could only handle insertions into the bottom of undefs (i.e. a vector widening), and x86-avx512 vXi1 insertion wasn't keeping track of undef elements in the base vector.
Fixes PR50053
Differential Revision: https://reviews.llvm.org/D107068
It's entirely possible (because it actually happened) for a bool
variable to end up with a 256-bit DW_AT_const_value. This came about
when a local bool variable was initialized from a bitfield in a
32-byte struct of bitfields, and after inlining and constant
propagation, the variable did have a constant value. The sequence of
optimizations had it carrying "i256" values around, but once the
constant made it into the llvm.dbg.value, no further IR changes could
affect it.
Technically the llvm.dbg.value did have a DIExpression to reduce it
back down to 8 bits, but the compiler is in no way ready to emit an
oversized constant *and* a DWARF expression to manipulate it.
Depending on the circumstances, we had either just the very fat bool
value, or an expression with no starting value.
The sequence of optimizations that led to this state did seem pretty
reasonable, so the solution I came up with was to invent a DWARF
constant expression folder. Currently it only does convert ops, but
there's no reason it couldn't do other ops if that became useful.
This broke three tests that depended on having convert ops survive
into the DWARF, so I added an operator that would abort the folder to
each of those tests.
Differential Revision: https://reviews.llvm.org/D106915
The LegalizeAction for this node should follow the logic for
`VECREDUCE_SEQ_FADD` and be determined using the vector operand's type.
here isn't an in-tree target that makes use of this, but I think it's safe to
say this is how it should behave, should a target want to customize the action
for this node.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D107478
This allows special constants like to 0 to be recognized. It's also
expected by isel patterns if a target had a mulh with immediate instructions.
The commuting done by tablegen won't commute patterns with immediates since it
expects DAGCombine to have done it.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D107486
Clang has builtin function '__builtin_isnan', which implements C
library function 'isnan'. This function now is implemented entirely in
clang codegen, which expands the function into set of IR operations.
There are three mechanisms by which the expansion can be made.
* The most common mechanism is using an unordered comparison made by
instruction 'fcmp uno'. This simple solution is target-independent
and works well in most cases. It however is not suitable if floating
point exceptions are tracked. Corresponding IEEE 754 operation and C
function must never raise FP exception, even if the argument is a
signaling NaN. Compare instructions usually does not have such
property, they raise 'invalid' exception in such case. So this
mechanism is unsuitable when exception behavior is strict. In
particular it could result in unexpected trapping if argument is SNaN.
* Another solution was implemented in https://reviews.llvm.org/D95948.
It is used in the cases when raising FP exceptions by 'isnan' is not
allowed. This solution implements 'isnan' using integer operations.
It solves the problem of exceptions, but offers one solution for all
targets, however some can do the check in more efficient way.
* Solution implemented by https://reviews.llvm.org/D96568 introduced a
hook 'clang::TargetCodeGenInfo::testFPKind', which injects target
specific code into IR. Now only SystemZ implements this hook and it
generates a call to target specific intrinsic function.
Although these mechanisms allow to implement 'isnan' with enough
efficiency, expanding 'isnan' in clang has drawbacks:
* The operation 'isnan' is hidden behind generic integer operations or
target-specific intrinsics. It complicates analysis and can prevent
some optimizations.
* IR can be created by tools other than clang, in this case treatment
of 'isnan' has to be duplicated in that tool.
Another issue with the current implementation of 'isnan' comes from the
use of options '-ffast-math' or '-fno-honor-nans'. If such option is
specified, 'fcmp uno' may be optimized to 'false'. It is valid
optimization in general, but it results in 'isnan' always returning
'false'. For example, in some libc++ implementations the following code
returns 'false':
std::isnan(std::numeric_limits<float>::quiet_NaN())
The options '-ffast-math' and '-fno-honor-nans' imply that FP operation
operands are never NaNs. This assumption however should not be applied
to the functions that check FP number properties, including 'isnan'. If
such function returns expected result instead of actually making
checks, it becomes useless in many cases. The option '-ffast-math' is
often used for performance critical code, as it can speed up execution
by the expense of manual treatment of corner cases. If 'isnan' returns
assumed result, a user cannot use it in the manual treatment of NaNs
and has to invent replacements, like making the check using integer
operations. There is a discussion in https://reviews.llvm.org/D18513#387418,
which also expresses the opinion, that limitations imposed by
'-ffast-math' should be applied only to 'math' functions but not to
'tests'.
To overcome these drawbacks, this change introduces a new IR intrinsic
function 'llvm.isnan', which realizes the check as specified by IEEE-754
and C standards in target-agnostic way. During IR transformations it
does not undergo undesirable optimizations. It reaches instruction
selection, where is lowered in target-dependent way. The lowering can
vary depending on options like '-ffast-math' or '-ffp-model' so the
resulting code satisfies requested semantics.
Differential Revision: https://reviews.llvm.org/D104854
We had some similar hasOneUse/isNON_EXTLoad early-outs spread out over different parts of the method - we should pull them all together.
Noticed while triaging PR45116
This adds handling for two cases:
1. A scalable vector where the element type is promoted.
2. A scalable vector where the element count is odd (or more generally,
not divisble by the element count of the part type).
(Some element types still don't work; for example, <vscale x 2 x i128>,
or <vscale x 2 x fp128>.)
Differential Revision: https://reviews.llvm.org/D105591
If all demanded elements of the BUILD_VECTOR pass a isGuaranteedNotToBeUndefOrPoison check, then we can treat this specific demanded use of the BUILD_VECTOR as guaranteed not to be undef or poison either.
Differential Revision: https://reviews.llvm.org/D107174
This patch legalizes the Machine Value Type introduced in D94096 for loads
and stores. A new target hook named getAsmOperandValueType() is added which
maps i512 to MVT::i64x8. GlobalISel falls back to DAG for legalization.
Differential Revision: https://reviews.llvm.org/D94097
This transform was added with D58874, but there were no tests for overflow ops.
We need to change this one way or another because it can crash as shown in:
https://llvm.org/PR51238
Note that if there are no uses of an overflow op's bool overflow result, we
reduce it to a regular math op, so we continue to fold that case either way.
If we have uses of both the math and the overflow bool, then we are likely
not saving anything by creating an independent sub instruction as seen in
the test diffs here.
This patch makes the behavior in SDAG consistent with what we do in
instcombine AFAICT.
Differential Revision: https://reviews.llvm.org/D106983
When we have a terminator sequence (i.e. a tailcall or return),
MIIsInTerminatorSequence is used to work out where the preceding ABI-setup
instructions end, i.e. the parts that were glued to the terminator
instruction. This allows LLVM to split blocks safely without having to
worry about ABI stuff.
The function only ignores DBG_VALUE instructions, meaning that the two
debug instructions I recently added can end terminator sequences early,
causing various MachineVerifier errors. This patch promotes the test for
debug instructions from "isDebugValue" to "isDebugInstr", thus avoiding any
debug-info interfering with this function.
Differential Revision: https://reviews.llvm.org/D106660
This patch adds a peephole optimization `SETCC(FREEZE(x),const)` => `FREEZE(SETCC(x,const))`
if the SETCC is only used by BRCOND.
Combined with `BRCOND(FREEZE(X)) => BRCOND(X)`, this leads to a nice improvement in the generated assembly when x is a masked loaded value.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D105344
This patch builds on top of D106575 in which scalable-vector splats were
supported in `ISD::matchBinaryPredicate`. It teaches the DAGCombiner how
to perform a variety of the pre-existing saturating add/sub combines on
scalable-vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106652
This patch extends support for (scalable-vector) splats in the
DAGCombiner via the `ISD::matchBinaryPredicate` function, which enable a
variety of simple combines of constants.
Users of this function may now have to distinguish between
`BUILD_VECTOR` and `SPLAT_VECTOR` vector operands. The way of dealing
with this in-tree follows the approach added for
`ISD::matchUnaryPredicate` implemented in D94501.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106575
I've setup the basic framework for the isGuaranteedNotToBeUndefOrPoison call and updated DAGCombiner::visitFREEZE to use it, further Opcodes can be handled when we have test coverage.
I'm not aware of any vector test freeze coverage so the DemandedElts (and the Depth) args are not being used yet - but they are in place.
SelectionDAG::isGuaranteedNotToBePoison wrappers have also been added.
Differential Revision: https://reviews.llvm.org/D106668
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D104797
The existing rule about the operand type is strange. Instead, just say
the operand is a TargetConstant with the right width. (Legalization
ignores TargetConstants, so it doesn't matter if that width is legal.)
Highlights:
1. I had to substantially rewrite the AArch64 isel patterns to expect a
TargetConstant. Nothing too exotic, but maybe a little hairy. Maybe
worth considering a target-specific node with some dagcombines instead
of this complicated nest of isel patterns.
2. Our behavior on RV32 for vectors of i64 has changed slightly. In
particular, we correctly preserve the width of the arithmetic through
legalization. This changes the DAG a bit. Maybe room for
improvement here.
3. I explicitly defined the behavior around overflow. This is necessary
to make the DAGCombine transforms legal, and I don't think it causes any
practical issues.
Differential Revision: https://reviews.llvm.org/D105673
This patch allows iterating typed enum via the ADT/Sequence utility.
It also changes the original design to better separate concerns:
- `StrongInt` only deals with safe `intmax_t` operations,
- `SafeIntIterator` presents the iterator and reverse iterator
interface but only deals with safe `StrongInt` internally.
- `iota_range` only deals with `SafeIntIterator` internally.
This design ensures that operations are always valid. In particular,
"Out of bounds" assertions fire when:
- the `value_type` is not representable as an `intmax_t`
- iterator operations make internal computation underflow/overflow
- the internal representation cannot be converted back to `value_type`
Differential Revision: https://reviews.llvm.org/D106279
RISCV would prefer a sign extended constant since that works better
with our constant materialization. We have an existing TLI hook we
use to control sign extension of setcc operands in type legalization.
That hook happens to do the right check we need here, but might be
straying from its original purpose. With only RISCV defining this
hook in tree, I wasn't sure if it was worth adding another hook
with identical behavior.
This is an alternative to D105785 where I tried to handle this in
the RISCV backend by not creating ANY_EXTENDs in some places.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D105918
This reverts commit 2a419a0b99.
The result of a shufflevector must not propagate poison from any element
other than the one noted in the shuffle mask.
The regressions outside of fptoui-may-overflow.ll can probably be
recovered some other way; for example, using isGuaranteedNotToBePoison.
See discussion on https://reviews.llvm.org/D106053 for more background.
Differential Revision: https://reviews.llvm.org/D106222
I'm going to extend the functionality started in D106058 so move the folds into their own method to reduce the amount of code in DAGCombiner::visitSELECT
Add an assertion that we've calling MaskedElementsAreZero with a vector op and that the DemandedElts arg is a matching width.
Makes the error a lot easier to grok when something else accidentally gets used.
If you attach __attribute__((optnone)) to a function when using
optimisations, that function will use fast-isel instead of the usual
SelectionDAG method. This is a problem for instruction referencing,
because it means DBG_VALUEs of virtual registers will be created,
triggering some safety assertions in LiveDebugVariables. Those assertions
exist to detect exactly this scenario, where an unexpected piece of code is
generating virtual register references in instruction referencing mode.
Fix this by transforming the DBG_VALUEs created by fast-isel into
half-formed DBG_INSTR_REFs, after which they get patched up in
finalizeDebugInstrRefs. The test modified adds a fast-isel mode to the
instruction referencing isel test.
Differential Revision: https://reviews.llvm.org/D105694
Similar to the folds performed in InstCombinerImpl::foldSelectOpOp, this attempts to push a select further up to help merge a pair of binops.
I'm primarily interested in select(cond,add(x,y),add(x,z)) folds to help expose pointer math (see https://bugs.llvm.org/show_bug.cgi?id=51069 etc.) but I've tried to use the more generic isBinOp().
Differential Revision: https://reviews.llvm.org/D106058
This is mostly a minor convenience, but the pattern seems frequent
enough to be worthwhile (and we'll probably add more uses in the
future).
Differential Revision: https://reviews.llvm.org/D105850
Let other parts of legalization handle the rest of the node, this allows
re-use of existing optimizations elsewhere.
Differential Revision: https://reviews.llvm.org/D105624
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
This is a cleanup patch -- we're now able to support all flavours of
variable location in instruction referencing mode. This patch updates
various tests for debug instructions to be broader: numerous code paths
try to ignore debug isntructions, and they now have to ignore the
additional DBG_PHI and DBG_INSTR_REFs that we can generate.
A small amount of rework happens for LiveDebugVariables: as we don't need
to track live intervals through regalloc any more, we can get away with
unlinking debug instructions before regalloc, then re-inserting them after.
Note that this isn't (yet) true of DBG_VALUE_LISTs, they still have to go
through live interval tracking.
In SelectionDAG, add a helper lambda that emits half-formed DBG_INSTR_REFs
for arguments in instr-ref mode, DBG_VALUE otherwise. This is one of the
final locations where DBG_VALUEs are emitted for vreg arguments.
X86InstrInfo now un-sets the debug instr number on SUB instructions that
get mutated into CMP instructions. As the instruction no longer computes a
subtraction, we can't use it for variable locations.
Differential Revision: https://reviews.llvm.org/D88898
We already have reassociation code for Adds and Ors separately in DAG
combiner, this adds it for the combination of the two where Ors act like
Adds. It reassociates (add (or (x, c), y) -> (add (add (x, y), c)) where
we know that the Ors operands have no common bits set, and the Or has
one use.
Differential Revision: https://reviews.llvm.org/D104765
This patch emits DBG_INSTR_REFs for two remaining flavours of variable
locations that weren't supported: copies, and inter-block VRegs. There are
still some locations that must be represented by DBG_VALUE such as
constants, but they're mostly independent of optimisations.
For variable locations that refer to values defined in different blocks,
vregs are allocated before isel begins, but the defining instruction
might not exist until late in isel. To get around this, emit
DBG_INSTR_REFs in a "half done" state, where the first operand refers to a
VReg. Then at the end of isel, patch these back up to refer to
instructions, using the finalizeDebugInstrRefs method.
Copies are something that I complained about the original RFC, and I
really don't want to have to put instruction numbers on copies. They don't
define a value: they move them. To address this isel, salvageCopySSA
interprets:
* COPYs,
* SUBREG_TO_REG,
* Anything that isCopyInstr thinks is a copy.
And follows chains of copies back to the defining instruction that they
read from. This relies on any physical registers that COPYs read being
defined in the same block, or being entry-block arguments. For the former
we can put an instruction number on the defining instruction; for the
latter we can drop a DBG_PHI that reads the incoming value.
Differential Revision: https://reviews.llvm.org/D88896
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Differential Revision: https://reviews.llvm.org/D104797
Previously we used the vector type, but we're loading/storing
invididual elements so I think only element alignment should matter.
Noticed while looking at the code for something else so I don't
have a test case.
Differential Revision: https://reviews.llvm.org/D105220
Inserting into a smaller-than-legal scalable vector would result in an
internal compiler error. For example, inserting a <vscale x 4 x i8> into
a <vscale x 8 x i8> (both illegal vector types for SVE) would cause a
crash.
This crash was happening because there was no code to promote (legalise)
the result of an INSERT_SUBVECTOR node.
This patch implements PromoteIntRes_INSERT_SUBVECTOR, which legalises
the ISD node. This is currently done by going through memory. This is
necessary because of the requirement that the SubVec parameter of the
INSERT_SUBVECTOR node must be smaller than the Vec parameter, which
means that INSERT_SUBVECTOR cannot always have a legal result/operand
types.
Co-Authored-by: Joe Ellis <joe.ellis@arm.com>
Differential Revision: https://reviews.llvm.org/D102766
Since gather lowering can now lower to nodes that may need expansion via
the vector legalizer, do MGATHER lowering via vector legalizer.
Additionally, as part of adding passthru support for fixed typed
gathers, fix passthru support for scalable types.
Depends on D104910
Differential Revision: https://reviews.llvm.org/D104217
When clamping the index for a memory access to a stacked vector we must
take into account the entire type being accessed, not just assume that
we are accessing only a single element.
Differential Revision: https://reviews.llvm.org/D105016
We were trying to expand these if they were going to be expanded
in op legalization so that we generated the minimum number of
operations. We failed to take into account that NVT could be
promoted to another legal type in op legalization.
Hoping this fixes the issue on the VE target reported as a follow
up to D96681. The check line changes were taken from before
1e46b6f401 so this patch does
appear to improve some cases that had previously regressed.
This intrinsic blocks floating point transformations by the optimizer.
Author: Pengfei
Reviewed By: LuoYuanke, Andy Kaylor, Craig Topper, kpn
Differential Revision: https://reviews.llvm.org/D99675
This ports the AArch64 SABD and USBD over to DAG Combine, where they can be
used by more backends (notably MVE in a follow-up patch). The matching code
has changed very little, just to handle legal operations and types
differently. It selects from (ABS (SUB (EXTEND a), (EXTEND b))), producing
a ubds/abdu which is zexted to the original type.
Differential Revision: https://reviews.llvm.org/D91937
This add as a fold of sub(0, splat(sub(0, x))) -> splat(x). This can
come up in the lowering of right shifts under AArch64, where we generate
a shift left of a negated number.
Differential Revision: https://reviews.llvm.org/D103755
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
We don't constant fold based on demanded bits elsewhere in
SimplifyDemandedBits, so I don't think we should shrink them either.
The affected ARM test changes because a constant become non-opaque
and eventually enabled some constant folding. This no longer happens.
I checked and InstCombine is able to simplify this test. I'm not sure exactly
what it was trying to test.
Reviewed By: lebedev.ri, dmgreen
Differential Revision: https://reviews.llvm.org/D104832
This is a partial reapply of the original commit and the followup commit
that were previously reverted; this reapply also includes a small fix
for a potential source of non-determinism, but also has a small change
to turn off variadic debug value salvaging, to ensure that any future
revert/reapply steps to disable and renable this feature do not risk
causing conflicts.
Differential Revision: https://reviews.llvm.org/D91722
This reverts commit 386b66b2fc.
The is from discussion in https://reviews.llvm.org/D104247#inline-993387
The contract and reassoc flags shouldn't imply each other .
All the aggressive fsub fusion reassociate operations,
we should guard them with reassoc flag check.
Reviewed By: mcberg2017
Differential Revision: https://reviews.llvm.org/D104723
According to IR LangRef, the FMF flag:
contract
Allow floating-point contraction (e.g. fusing a multiply followed by an
addition into a fused multiply-and-add).
reassoc
Allow reassociation transformations for floating-point instructions.
This may dramatically change results in floating-point.
My understanding is that these two flags shouldn't imply each other,
as we might have a SDNode that can be reassociated with others, but
not contractble.
eg: We may want following fmul/fad/fsub to freely reassoc, but don't
want fma being generated here.
%F = fmul reassoc double %A, %B ; <double> [#uses=1]
%G = fmul reassoc double %C, %D ; <double> [#uses=1]
%H = fadd reassoc double %F, %G ; <double> [#uses=1]
%I = fsub reassoc double %H, %E ; <double> [#uses=1]
Before https://reviews.llvm.org/D45710, `reassoc` flag actually
did not imply isContratable either.
The current implementation also only check the flag in fadd node,
ignoring fmul node, this patch update that as well.
Reviewed By: spatel, qiucf
Differential Revision: https://reviews.llvm.org/D104247
This can be seen as a follow up to commit 0ee439b705,
that changed the second argument of __powidf2, __powisf2 and
__powitf2 in compiler-rt from si_int to int. That was to align with
how those runtimes are defined in libgcc.
One thing that seem to have been missing in that patch was to make
sure that the rest of LLVM also handle that the argument now depends
on the size of int (not using the si_int machine mode for 32-bit).
When using __builtin_powi for a target with 16-bit int clang crashed.
And when emitting libcalls to those rtlib functions, typically when
lowering @llvm.powi), the backend would always prepare the exponent
argument as an i32 which caused miscompiles when the rtlib was
compiled with 16-bit int.
The solution used here is to use an overloaded type for the second
argument in @llvm.powi. This way clang can use the "correct" type
when lowering __builtin_powi, and then later when emitting the libcall
it is assumed that the type used in @llvm.powi matches the rtlib
function.
One thing that needed some extra attention was that when vectorizing
calls several passes did not support that several arguments could
be overloaded in the intrinsics. This patch allows overload of a
scalar operand by adding hasVectorInstrinsicOverloadedScalarOpd, with
an entry for powi.
Differential Revision: https://reviews.llvm.org/D99439
This only applies to FastIsel. GlobalIsel seems to sidestep
the issue.
This fixes https://bugs.llvm.org/show_bug.cgi?id=46996
One of the things we do in llvm is decide if a type needs
consecutive registers. Previously, we just checked if it
was an array or not.
(plus an SVE specific check that is not changing here)
This causes some confusion when you arbitrary IR like:
```
%T1 = type { double, i1 };
define [ 1 x %T1 ] @foo() {
entry:
ret [ 1 x %T1 ] zeroinitializer
}
```
We see it is an array so we call CC_AArch64_Custom_Block
which bails out when it sees the i1, a type we don't want
to put into a block.
This leaves the location of the double in some kind of
intermediate state and leads to odd codegen. Which then crashes
the backend because it doesn't know how to implement
what it's been asked for.
You get this:
```
renamable $d0 = FMOVD0
$w0 = COPY killed renamable $d0
```
Rather than this:
```
$d0 = FMOVD0
$w0 = COPY $wzr
```
The backend knows how to copy 64 bit to 64 bit registers,
but not 64 to 32. It can certainly be taught how but the real
issue seems to be us even trying to assign a register block
in the first place.
This change makes the logic of
AArch64TargetLowering::functionArgumentNeedsConsecutiveRegisters
a bit more in depth. If we find an array, also check that all the
nested aggregates in that array have a single member type.
Then CC_AArch64_Custom_Block's assumption of a type that looks
like [ N x type ] will be valid and we get the expected codegen.
New tests have been added to exercise these situations. Note that
some of the output is not ABI compliant. The aim of this change is
to simply handle these situations and not to make our processing
of arbitrary IR ABI compliant.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D104123
Iff we have `SCALAR_TO_VECTOR` (and we demand it's only defined 0'th element),
and said scalar was produced by `EXTRACT_VECTOR_ELT` from the 0'th element
of some vector, then we can just continue traversal into said source vector.
This comes up in X86 vector uniform shift lowering.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D104250
6e5628354e regressed the Windows build as
the return type no longer matched in both branches for the return value
type deduction. This uses a bit more compiler magic to deal with that.
The sorting, obviously, must be stable, else we will have random assembly fluctuations.
Apparently there was no test coverage that would benefit from that,
so i've added one test.
The sorting consists of two parts - just sort the input vectors,
and recompute the shuffle mask -> input vector mapping.
I don't believe we need to do anything else.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D104187
Ensure that we provide a `Module` when checking if a rename of an intrinsic is necessary.
This fixes the issue that was detected by https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=32288
(as mentioned by @fhahn), after committing D91250.
Note that the `LLVMIntrinsicCopyOverloadedName` is being deprecated in favor of `LLVMIntrinsicCopyOverloadedName2`.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D99173
When reducing vector builds to shuffles it possible that
the DAG combiner may try to extract invalid subvectors.
This happens as the existing code assumes vectors will be power
of 2 sizes, which is already untrue, but becomes more noticable
with v6 and v7 types.
Specifically the existing code assumes that half PowerOf2Ceil of
a given vector index will fit twice into a given vector.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D103880
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D95425
As shown in:
https://llvm.org/PR50623
...and the similar tests here, we were not accounting for
store merging of different sizes that do not cover the
entire range of the wide value to be stored.
This is the easy fix: just make sure that all of the
original stores are the same size, so when we calculate
the wide width, it's a simple N * M check.
This still allows all of the motivating optimizations from:
D86420 / 54a5dd485c
D87112 / 7a06b166b1
We could enhance this code to track individual bytes and
allow merging multiple sizes.
shuffle(concat(x,undef),concat(y,undef)) -> concat(shuffle(x,y),shuffle(x,y))
If the original shuffle references any of the upper (undef) subvector elements, ensure the split shuffle masks uses undef instead of an out-of-bounds value.
Fixes PR50609
> This reapplies c0f3dfb9, which was reverted following the discovery of
> crashes on linux kernel and chromium builds - these issues have since
> been fixed, allowing this patch to re-land.
This reverts commit 36ec97f76a.
The change caused non-determinism in the compiler, see comments on the code
review at https://reviews.llvm.org/D91722.
Reverting to unbreak people's builds until that can be addressed.
This also reverts the follow-up "[DebugInfo] Limit the number of values
that may be referenced by a dbg.value" in
a0bd6105d8.
This sets the AllowTruncation flag on isConstOrConstSplat in
isNullOrNullSplat, allowing it to see truncated constant zeroes on
architectures such as AArch64, where only a i32.i64 are legal. As a
truncation of 0 is always 0, this should always be valid, allowing some
extra folding to happen including some of the cases from D103755.
Differential Revision: https://reviews.llvm.org/D103756
Needs to be discussed more.
This reverts commit 255a5c1baa6020c009934b4fa342f9f6dbbcc46
This reverts commit df2056ff3730316f376f29d9986c9913b95ceb1
This reverts commit faff79b7ca144e505da6bc74aa2b2f7cffbbf23
This reverts commit d2a9020785c6e02afebc876aa2778fa64c5cafd
This patch extends the SelectionDAG's ability to constant-fold vector
arithmetic to include support for SPLAT_VECTOR. This is not only for
scalable-vector types but also for fixed-length vector types, which
helps Hexagon in a couple of cases.
The original RISC-V test case was in fact an infinite DAGCombine loop.
The pattern `and (truncate v1), (truncate v2)` can be combined to
`truncate (and v1, v2)` but the truncate can similarly be combined back
to `truncate (and v1, v2)` (but, crucially, only when one of `v1` or
`v2` is a constant vector).
It wasn't exposed in on fixed-length types because a TRUNCATE of a
constant BUILD_VECTOR was folded into the BUILD_VECTOR itself, whereas
this did not happen for the equivalent (scalable-vector) SPLAT_VECTOR.
Reviewed By: RKSimon, craig.topper
Differential Revision: https://reviews.llvm.org/D103246
The `DAGTypeLegalizer::WidenVSELECTMask` function is not (yet) ready for
scalable vector types, and has numerous places in which it tries to grab
either the fixed size or number of elements of its types.
I believe that it should be possible to update this method to properly
account for scalable-vector types, but we don't have test cases for
that; RISC-V bails out early on as it has legal i1 vector masks. As
such, this patch just prevents it from crashing.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103536
This extends 434c8e013a and ede3982792 to handle signed
predicates by sign-extending the setcc operands.
This is not shown directly in https://llvm.org/PR50055 ,
but the pattern is visible by changing the unsigned convert
to signed in the source code.
This is a follow-up to D103280 that eases the use restrictions,
so we can handle the motivating case from:
https://llvm.org/PR50055
The loop code is adapted from similar use checks in
ExtendUsesToFormExtLoad() and SliceUpLoad(). I did not see an
easier way to filter out non-chain uses of load values.
Differential Revision: https://reviews.llvm.org/D103462
Use RuntimeLibcalls to get a common way to pick correct RTLIB::POWI_*
libcall for a given value type.
This includes a small refactoring of ExpandFPLibCall and
ExpandArgFPLibCall in SelectionDAGLegalize to share a bit of code,
plus adding an ExpandFPLibCall version that can be called directly
when expanding FPOWI/STRICT_FPOWI to ensure that we actually use
the same RTLIB::Libcall when expanding the libcall as we used when
checking the legality of such a call by doing a getLibcallName check.
Differential Revision: https://reviews.llvm.org/D103050
The FPOWI DAG node is normally lowered to a libcall to one of the
RTLIB::POWI* runtime functions and the exponent should normally
have a type matching sizeof(int) when making the call. Thus,
type promotion of the exponent could lead to an FPOWI with a type
for the second operand that would be incorrect when doing the
libcall (a situation which would be hard to detect post-legalization
if we allow such FPOWI nodes).
This patch is changing DAGTypeLegalizer::PromoteIntOp_FPOWI to
do the rewrite into a libcall directly instead of promoting the
operand. This way we can check that the exponent is smaller than
sizeof(int) and we can let TargetLowering handle promotion as
part of making the libcall. It could be noticed here that makeLibCall
has some knowledge about targets such as 64-bit RISCV, for which the
libcall argument should be extended to a type larger than sizeof(int).
Differential Revision: https://reviews.llvm.org/D102950
I accidentaly pushed a draft of D103280 that was discussed
during the review, but it was not supposed to be the final
version.
Rather than revert and recommit, I'm updating the existing
code. This way we have a record of the codegen diff that
would result if we decide to remove this predicate in the
future.
sext (vsetcc X, Y) --> vsetcc (zext X), (zext Y) --
(when the zexts are free and a bunch of other conditions)
We have a couple of similar folds to this already for vector selects,
but this pattern slips through because it is only a setcc.
The tests are based on the motivating case from:
https://llvm.org/PR50055
...but we need extra logic to get that example, so I've left that as
a TODO for now.
Differential Revision: https://reviews.llvm.org/D103280
extractelement is poison if the index is out-of-bounds, so just
scalarizing the load may introduce an out-of-bounds load, which is UB.
To avoid introducing new UB, we can mask the index so it only contains
valid indices.
Fixes PR50382.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D103077
If a cmpxchg specifies acquire or seq_cst on failure, make sure we
generate code consistent with that ordering even if the success ordering
is not acquire/seq_cst.
At one point, it was ambiguous whether this sort of construct was valid,
but the C++ standad and LLVM now accept arbitrary combinations of
success/failure orderings.
This doesn't address the corresponding issue in AtomicExpand. (This was
reported as https://bugs.llvm.org/show_bug.cgi?id=33332 .)
Fixes https://bugs.llvm.org/show_bug.cgi?id=50512.
Differential Revision: https://reviews.llvm.org/D103284
Parameter positions seem like they should be unsigned.
While there, make function names lowercase per coding standards.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D103224
SwiftTailCC has a different set of requirements than the C calling convention
for a tail call. The exact argument sequence doesn't have to match, but fewer
ABI-affecting attributes are allowed.
Also make sure the musttail diagnostic triggers if a musttail call isn't
actually a tail call.
This patch adds a way for the target to configure the type it uses for
the explicit vector length operands of VP SDNodes. The type must be a
legal integer type (there is still no target-independent legalization of
this operand) and must currently be at least as big as i32, the type
used by the IR intrinsics. An implicit zero-extension takes place on
targets which choose a larger type. All VP nodes should be created with
this type used for the EVL operand.
This allows 64-bit RISC-V to avoid custom legalization of all VP nodes,
keeping them in their target-independent form for that bit longer.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D103027
DAGCombine's `mergeStoresOfConstantsOrVecElts` optimization is told
whether it's to use vector types and also whether it's to issue a
truncating store. However, the truncating store code path assumes a
scalar integer `ConstantSDNode`, and when using vector types it creates
either a `BUILD_VECTOR` or `CONCAT_VECTORS` to store: neither of which
is a constant.
The `riscv64` target is able to expose a crash here because it switches
on both code paths at the same time. The `f32` is stored as `i32` which
must be promoted to `i64`, necessitating a truncating store.
It also decides later that it prefers a vector store of `v2f32`.
While vector truncating stores are legal, this combine is not able to
emit them. We also don't have a test case. This patch adds an assert to
catch this case more gracefully, and updates one of the caller functions
to the function to turn off the use of truncating stores when preferring
vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103173
This patch extends the cases in which the legalizer is able to express
VSELECT in terms of XOR/AND/OR. When dealing with a VSELECT between
boolean vector types, the mask itself is an all-ones or all-ones value
of the operand type, so a 0/1 boolean type behaves identically to a 0/-1
type.
This greatly helps RISC-V which relies on expansion for these nodes. It
also allows scalable-vector bool VSELECTs to use the default expansion,
where before it would crash in SelectionDAG::UnrollVectorOp.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103147
Support virtual, physical and tied i128 register operands in inline assembly.
i128 is on SystemZ not really supported and is not a legal type and generally
such a value will be split into two i64 parts. There are however some
instructions that require a pair of two GPR64 registers contained in the GR128
bit reg class, which is untyped.
For inline assmebly operands, it proved to be very cumbersome to first follow
the general behavior of splitting an i128 operand into two parts and then
later rebuild the INLINEASM MI to have one GR128 register. Instead, some
minor common code changes were made to SelectionDAGBUilder to only create one
GR128 register part to begin with. In particular:
- getNumRegisters() now has an optional parameter "RegisterVT" which is
passed by AddInlineAsmOperands() and GetRegistersForValue().
- The bitcasting in GetRegistersForValue is not performed if RegVT is
Untyped.
- The RC for a tied use in AddInlineAsmOperands() is now computed either from
the tied def (virtual register), or by getMinimalPhysRegClass() (physical
register).
- InstrEmitter.cpp:EmitCopyFromReg() has been fixed so that the register
class (DstRC) can also be computed for an illegal type.
In the SystemZ backend getNumRegisters(), splitValueIntoRegisterParts() and
joinRegisterPartsIntoValue() have been implemented to handle i128 operands.
Differential Revision: https://reviews.llvm.org/D100788
Review: Ulrich Weigand
- When memory intrinsics, such as memcpy, the attached scoped AA
metadata is not passed down to the backend. As a result, the backend
cannot schedule relevant memory operations around them following that
hint. In this patch, SelectionDAG is enhanced to propagate that
metadata (scoped AA only) when they are lowered into loads and stores.
Differential Revision: https://reviews.llvm.org/D102215
D29668 enabled to avoid a useless copy of the argument value into an alloca if the caller places it in memory (as it often happens on x86) by directly forwarding the pointer to it. This optimization is illegal if the type contains padding bytes: if a truncating store into the alloca is replaced the upper bits are filled with garbage and produce code misbehaving at runtime.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D102153
This reapplies c0f3dfb9, which was reverted following the discovery of
crashes on linux kernel and chromium builds - these issues have since
been fixed, allowing this patch to re-land.
This reverts commit 4397b7095d.
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Re-landed with correct handling in ComputeNumSignBits for Tmp == VTBits,
where zero-extending atomics were incorrectly returning 0 rather than
the (slightly confusing) required return value of 1.
Re-landed again after D102819 fixed PowerPC to correctly zero-extend all
of its atomics as it claimed to do, since the combination of that bug
and this optimisation caused buildbot regressions.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
The use of `SelectionDAG::getSplatValue` isn't guaranteed to return a
type-legal splat value as it may implicitly extract a vector element
from another shuffle. It is not permitted to introduce an illegal type
when lowering shuffles.
This patch addresses the crash by adding a boolean flag to
`getSplatValue`, defaulting to false, which when set will ensure a
type-legal return value. If it is unable to do that it will fail to
return a splat value.
I've been through the existing uses of `getSplatValue` in other targets
and was unable to find a need or test cases showing a need to update
their uses. In some cases, the call is made during `LegalizeVectorOps`
which may still produce illegal scalar types. In other situations, the
illegally-typed splat value may be quickly patched up to a legal type
(such as any-extending the returned `extract_vector_elt` up to a legal
type) before `LegalizeDAG` notices.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102687
Currently, variadic dbg.values (i.e. those using a DIArgList as part of
their location) are not handled properly by FastISel or GlobalISel, and
will produce invalid DBG_VALUE instructions if they encounter them. This
patch fixes this issue by emitting undef DBG_VALUE instructions for
variadic dbg.values, so that no incorrect instruction is produced and
any prior variable location is terminated.
This is simply a quick-fix to prevent errors; a correct implementation
should come later for these ISel pipelines to ensure that we do not drop
debug information unnecessarily.
Differential Revision: https://reviews.llvm.org/D102500
When trying to return a type such as <vscale x 1 x i32> from a
function we crash in DAGTypeLegalizer::WidenVecRes_EXTRACT_SUBVECTOR
when attempting to get the fixed number of elements in the vector.
For the simple case we are dealing with, i.e. extracting
<vscale x 1 x i32> from index 0 of input vector <vscale x 4 x i32>
we can simply rely upon existing code that just returns the input.
Differential Revision: https://reviews.llvm.org/D102605
When attempting to return something like a <vscale x 1 x i32>
type from a function we end up trying to widen the vector by
inserting a <vscale x 1 x i32> subvector into an undefined
<vscale x 4 x i32> vector. However, during legalisation we
then attempt to widen the INSERT_SUBVECTOR operands and hit
an error in WidenVectorOperand.
This patch adds a new WidenVecOp_INSERT_SUBVECTOR function
that currently only supports inserting subvectors into undefined
vectors.
Differential Revision: https://reviews.llvm.org/D102501
This is a step towards relying more on node-level FMF rather than function-wide
or target settings.
I think it was just an oversight that we didn't get this path in D87361
or follow-on patches.
The lack of FMF propagation is blocking D90901 from converting tests to IR-level FMF.
We can't do much more than this currently because we also fail to propagate flags
from x86-specific node to generic FMA node. That would be another patch, so the
test just verifies that we can transfer from IR to initial SDAG node.
Differential Revision: https://reviews.llvm.org/D102725
For opaque pointers, we're trying to avoid uses of
PointerType::getElementType().
A couple of ISel places use PointerType::getElementType(). Some of these
are easy to fix by using ArgListEntry's indirect types.
The inalloca type wasn't stored there, as opposed to preallocated and
byval which have their indirect types available, so add it and use it.
This is a reland after an MSan fix in D102667.
Differential Revision: https://reviews.llvm.org/D101713
This patch is the Part-1 (FE Clang) implementation of HW Exception handling.
This new feature adds the support of Hardware Exception for Microsoft Windows
SEH (Structured Exception Handling).
This is the first step of this project; only X86_64 target is enabled in this patch.
Compiler options:
For clang-cl.exe, the option is -EHa, the same as MSVC.
For clang.exe, the extra option is -fasync-exceptions,
plus -triple x86_64-windows -fexceptions and -fcxx-exceptions as usual.
NOTE:: Without the -EHa or -fasync-exceptions, this patch is a NO-DIFF change.
The rules for C code:
For C-code, one way (MSVC approach) to achieve SEH -EHa semantic is to follow
three rules:
* First, no exception can move in or out of _try region., i.e., no "potential
faulty instruction can be moved across _try boundary.
* Second, the order of exceptions for instructions 'directly' under a _try
must be preserved (not applied to those in callees).
* Finally, global states (local/global/heap variables) that can be read
outside of _try region must be updated in memory (not just in register)
before the subsequent exception occurs.
The impact to C++ code:
Although SEH is a feature for C code, -EHa does have a profound effect on C++
side. When a C++ function (in the same compilation unit with option -EHa ) is
called by a SEH C function, a hardware exception occurs in C++ code can also
be handled properly by an upstream SEH _try-handler or a C++ catch(...).
As such, when that happens in the middle of an object's life scope, the dtor
must be invoked the same way as C++ Synchronous Exception during unwinding
process.
Design:
A natural way to achieve the rules above in LLVM today is to allow an EH edge
added on memory/computation instruction (previous iload/istore idea) so that
exception path is modeled in Flow graph preciously. However, tracking every
single memory instruction and potential faulty instruction can create many
Invokes, complicate flow graph and possibly result in negative performance
impact for downstream optimization and code generation. Making all
optimizations be aware of the new semantic is also substantial.
This design does not intend to model exception path at instruction level.
Instead, the proposed design tracks and reports EH state at BLOCK-level to
reduce the complexity of flow graph and minimize the performance-impact on CPP
code under -EHa option.
One key element of this design is the ability to compute State number at
block-level. Our algorithm is based on the following rationales:
A _try scope is always a SEME (Single Entry Multiple Exits) region as jumping
into a _try is not allowed. The single entry must start with a seh_try_begin()
invoke with a correct State number that is the initial state of the SEME.
Through control-flow, state number is propagated into all blocks. Side exits
marked by seh_try_end() will unwind to parent state based on existing
SEHUnwindMap[].
Note side exits can ONLY jump into parent scopes (lower state number).
Thus, when a block succeeds various states from its predecessors, the lowest
State triumphs others. If some exits flow to unreachable, propagation on those
paths terminate, not affecting remaining blocks.
For CPP code, object lifetime region is usually a SEME as SEH _try.
However there is one rare exception: jumping into a lifetime that has Dtor but
has no Ctor is warned, but allowed:
Warning: jump bypasses variable with a non-trivial destructor
In that case, the region is actually a MEME (multiple entry multiple exits).
Our solution is to inject a eha_scope_begin() invoke in the side entry block to
ensure a correct State.
Implementation:
Part-1: Clang implementation described below.
Two intrinsic are created to track CPP object scopes; eha_scope_begin() and eha_scope_end().
_scope_begin() is immediately added after ctor() is called and EHStack is pushed.
So it must be an invoke, not a call. With that it's also guaranteed an
EH-cleanup-pad is created regardless whether there exists a call in this scope.
_scope_end is added before dtor(). These two intrinsics make the computation of
Block-State possible in downstream code gen pass, even in the presence of
ctor/dtor inlining.
Two intrinsic, seh_try_begin() and seh_try_end(), are added for C-code to mark
_try boundary and to prevent from exceptions being moved across _try boundary.
All memory instructions inside a _try are considered as 'volatile' to assure
2nd and 3rd rules for C-code above. This is a little sub-optimized. But it's
acceptable as the amount of code directly under _try is very small.
Part-2 (will be in Part-2 patch): LLVM implementation described below.
For both C++ & C-code, the state of each block is computed at the same place in
BE (WinEHPreparing pass) where all other EH tables/maps are calculated.
In addition to _scope_begin & _scope_end, the computation of block state also
rely on the existing State tracking code (UnwindMap and InvokeStateMap).
For both C++ & C-code, the state of each block with potential trap instruction
is marked and reported in DAG Instruction Selection pass, the same place where
the state for -EHsc (synchronous exceptions) is done.
If the first instruction in a reported block scope can trap, a Nop is injected
before this instruction. This nop is needed to accommodate LLVM Windows EH
implementation, in which the address in IPToState table is offset by +1.
(note the purpose of that is to ensure the return address of a call is in the
same scope as the call address.
The handler for catch(...) for -EHa must handle HW exception. So it is
'adjective' flag is reset (it cannot be IsStdDotDot (0x40) that only catches
C++ exceptions).
Suppress push/popTerminate() scope (from noexcept/noTHrow) so that HW
exceptions can be passed through.
Original llvm-dev [RFC] discussions can be found in these two threads below:
https://lists.llvm.org/pipermail/llvm-dev/2020-March/140541.htmlhttps://lists.llvm.org/pipermail/llvm-dev/2020-April/141338.html
Differential Revision: https://reviews.llvm.org/D80344/new/
Ensure we tell getShiftAmountTy that we're working with pre-legalized types to prevent cases where the (legalized) shift type can no longer handle the (non-legalized) type width.
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=34366
The select-of-constants transform was asserting that its constant vector
inputs did not implicitly truncate their input without that as an
explicit precondition to the function. This patch relaxes that assertion
into an early return to skip the optimization.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D102393
ScheduleDAGFast.cpp is compiled to object file, but the ScheduleDAGFast
object file isn't linked into clang executable file as no symbol is
referred by outside. Add calling to createXxx of ScheduleDAGFast.cpp,
then the ScheduleDAGFast object file will be linked into clang
executable file. The static RegisterScheduler will register scheduler
fast and linearize at clang boot time.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D101601
This extends any frame record created in the function to include that
parameter, passed in X22.
The new record looks like [X22, FP, LR] in memory, and FP is stored with 0b0001
in bits 63:60 (CodeGen assumes they are 0b0000 in normal operation). The effect
of this is that tools walking the stack should expect to see one of three
values there:
* 0b0000 => a normal, non-extended record with just [FP, LR]
* 0b0001 => the extended record [X22, FP, LR]
* 0b1111 => kernel space, and a non-extended record.
All other values are currently reserved.
If compiling for arm64e this context pointer is address-discriminated with the
discriminator 0xc31a and the DB (process-specific) key.
There is also an "i8** @llvm.swift.async.context.addr()" intrinsic providing
front-ends access to this slot (and forcing its creation initialized to nullptr
if necessary).
I've taken the following steps to add unwinding support from inline assembly:
1) Add a new `unwind` "attribute" (like `sideeffect`) to the asm syntax:
```
invoke void asm sideeffect unwind "call thrower", "~{dirflag},~{fpsr},~{flags}"()
to label %exit unwind label %uexit
```
2.) Add Bitcode writing/reading support + LLVM-IR parsing.
3.) Emit EHLabels around inline assembly lowering (SelectionDAGBuilder + GlobalISel) when `InlineAsm::canThrow` is enabled.
4.) Tweak InstCombineCalls/InlineFunction pass to not mark inline assembly "calls" as nounwind.
5.) Add clang support by introducing a new clobber: "unwind", which lower to the `canThrow` being enabled.
6.) Don't allow unwinding callbr.
Reviewed By: Amanieu
Differential Revision: https://reviews.llvm.org/D95745
We want it to be available in analyzes so that we could use the
CodeGen notion in middle-end passes (for example, to check if
a GC may free some particular pointer).
This is a preparatory patch that simply moves the files around.
Note: if this causes some build issues, this patch must just be reverted.
Differential Revision: https://reviews.llvm.org/D100557
Reviewed By: reames
This patch extends the vector type-conversion and legalization capabilities of
scalable vector types.
Firstly, `vscale x 1` types now behave more like the corresponding `vscale x
2+` types. This enables the integer promotion legalization of extended scalable
types, such as the promotion of `<vscale x 1 x i5>` to `<vscale x 1 x i8>`.
These `vscale x 1` types are also now better handled by
`getVectorTypeBreakdown`, where what looks like older handling for 1-element
fixed-length vector types was spuriously updated to include scalable types.
Widening of scalable types is now better supported, by using `INSERT_SUBVECTOR`
to insert the smaller scalable vector "value" type into the wider scalable
vector "part" type. This allows AArch64 to pass and return `vscale x 1` types
by value by widening.
There are still cases where we are unable to legalize `vscale x 1` types, such
as where expansion would require splitting the vector in two.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D102073
Fixes a bug in the DAG combiner that eliminates the stores because it missed
to inspect the address space of the pointers.
%v = load %ptr_as1
// no chain side effect
store %v, %ptr_as2
As well as
store %v, %ptr_as1
store %v, %ptr_as2
Fixes a test for above in X86.
Differential Revision: https://reviews.llvm.org/D102096
For opaque pointers, we're trying to avoid uses of
PointerType::getElementType().
A couple of ISel places use PointerType::getElementType(). Some of these
are easy to fix by using ArgListEntry's indirect types.
The inalloca type wasn't stored there, as opposed to preallocated and
byval which have their indirect types available, so add it and use it.
Differential Revision: https://reviews.llvm.org/D101713
Expanding a fixed length operation involves wrapping the operation in an
insert/extract subvector pair, as such, when this is done to bitcast we
end up with an extract_subvector of a bitcast. DAGCombine tries to
convert this into a bitcast of an extract_subvector which restores the
initial fixed length bitcast, causing an infinite loop of legalization.
As part of this patch, we must make sure the above DAGCombine does not
trigger after legalization if the created bitcast would not be legal.
Differential Revision: https://reviews.llvm.org/D101990
This patch extends VectorLegalizer::ExpandSELECT to permit expansion
also for scalable vector types. The only real change is conditionally
checking for BUILD_VECTOR or SPLAT_VECTOR legality depending on the
vector type.
We can use this to fix "cannot select" errors for scalable vector
selects on the RISCV target. Note that in future patches RISCV will
possibly custom-lower vector SELECTs to VSELECTs for branchless codegen.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102063
This patch fixes a crash in the compiler that occurs when certain
invalidated SDDbgValues are emitted. The cause of this was that we would
attempt to check the liveness of the debug value's operands, which
triggers an assert if any of those operands are invalid. This patch
changes this check such that it only occurs if the SDDbgValue is valid;
if not, the check is irrelevant anyway, so can be safely ignored.
Differential Revision: https://reviews.llvm.org/D101540
Based off a discussion on D89281 - where the AARCH64 implementations were being replaced to use funnel shifts.
Any target that has efficient funnel shift lowering can handle the shift parts expansion using the same expansion, avoiding a lot of duplication.
I've generalized the X86 implementation and moved it to TargetLowering - so far I've found that AARCH64 and AMDGPU benefit, but many other targets (ARM, PowerPC + RISCV in particular) could easily use this with a few minor improvements to their funnel shift lowering (or the folding of their target ops that funnel shifts lower to).
NOTE: I'm trying to avoid adding full SHIFT_PARTS legalizer handling as I think it might actually be possible to remove these opcodes in the medium-term and use funnel shift / libcall expansion directly.
Differential Revision: https://reviews.llvm.org/D101987
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Re-landed with correct handling in ComputeNumSignBits for Tmp == VTBits,
where zero-extending atomics were incorrectly returning 0 rather than
the (slightly confusing) required return value of 1.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
This seems to have broken sanitizers, giving lots of
Assertion `NumBits <= MAX_INT_BITS && "bitwidth too large"' failed.
failures across multiple targets (currently X86 and PowerPC). Reverting
until I have a chance to reproduce and debug.
This reverts commit 6e876f9ded.
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
Removing an assertion introduced with D68945. The
patch was later reverted with 6531a78ac4, but failed
to remove this assertion. It causes a problem while
trying to split a 64-bit argument into sub registers.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D101594
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Originally submitted as 3338290c18.
Reverted in c7df6b1223.
This allows for a much more efficient encoding for small negative
numbers by storing the sign bit first and negating the rest of
the bits. This was already being used for OPC_CheckInteger.
For every in tree target this affects, the table got smaller.
R600GenDAGISel.inc saw the largest reduction of 7K.
I did have to add a new opcode for StringIntegers used for
register class ids and subregister indices since we don't have the
integer value to encode. The enum name is emitted directly into
the table. Previously assumed the enum would expand to a positive
7-bit number. We might be able to just shift that right by 1 and
assume it is a positive 6 bit number, but that will need more
investigation.
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
This replaces D98479.
This allows type legalization to form SPLAT_VECTOR_PARTS so we don't
lose the splattedness when the scalar type is split.
I'm handling SPLAT_VECTOR_PARTS for fixed vectors separately so
we can continue using non-VL nodes for scalable vectors.
I limited to RV32+vXi64 because DAGCombiner::visitBUILD_VECTOR likes
to form SPLAT_VECTOR before seeing if it can replace the BUILD_VECTOR
with other operations. Especially interesting is a splat BUILD_VECTOR of
the extract_vector_elt which can become a splat shuffle, but won't if
we form SPLAT_VECTOR first. We either need to reorder visitBUILD_VECTOR
or add visitSPLAT_VECTOR.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100803
Previously we used an i32 constant to store the saturation width, but i32 isn't
legal on RISCV64. This wasn't a big deal to fix, but it is extra work for the
type legalizer.
This patch uses a VTSDNode to store the type similar to SEXT_INREG. This makes
it opaque to the type legalizer.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D101262
Previous build failures were caused by an error in bitcode reading and
writing for DIArgList metadata, which has been fixed in e5d844b587.
There were also some unnecessary asserts that were being triggered on
certain builds, which have been removed.
This reverts commit dad5caa59e.
Add PromoteIntOp_FP_TO_XINT_SAT to type legalize the bit width
operand from i32 to i64 for RV64.
Add test cases for the saturating intrinsics for half/float/double
and i32/i64. CodeGen is definitely not optimal. We can probably
make use of the native behavior of fcvt instructions in many cases.
Fixes PR50083
It is proper to relax non-negative limitation of step_vector.
Also this patch adds more combines for step_vector:
(sub X, step_vector(C)) -> (add X, step_vector(-C))
Differential Revision: https://reviews.llvm.org/D100812
This patch adds incrementally-better support for SPLAT_VECTOR in a
handful of vector combines by changing a few more
isBuildVectorAllOnes/isBuildVectorAllZeros to the equivalent
isConstantSplatVectorAllOnes/Zeros calls.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D100851
It used to be that all of our intrinsics were call instructions, but over time, we've added more and more invokable intrinsics. According to the verifier, we're up to 8 right now. As IntrinsicInst is a sub-class of CallInst, this puts us in an awkward spot where the idiomatic means to check for intrinsic has a false negative if the intrinsic is invoked.
This change switches IntrinsicInst from being a sub-class of CallInst to being a subclass of CallBase. This allows invoked intrinsics to be instances of IntrinsicInst, at the cost of requiring a few more casts to CallInst in places where the intrinsic really is known to be a call, not an invoke.
After this lands and has baked for a couple days, planned cleanups:
Make GCStatepointInst a IntrinsicInst subclass.
Merge intrinsic handling in InstCombine and use idiomatic visitIntrinsicInst entry point for InstVisitor.
Do the same in SelectionDAG.
Do the same in FastISEL.
Differential Revision: https://reviews.llvm.org/D99976
This patch changes ISD::isBuildVectorAllZeros to
ISD::isConstantSplatVectorAllZeros which handles zero sclar vector.
TestPlan: check-llvm
Differential Revision: https://reviews.llvm.org/D100813
This patch relaxes the requirement that the STEP_VECTOR step constant
must be of a type at least as large as the vector element type. This
does not permit its use on targets which have legal vector element types
larger than the largest legal scalar type, such as i64 vectors on RV32.
As such, the requirement has been loosened so that the step operand must
be any scalar type so long as the constant immediate is non-negative and
the value fits inside the vector element type.
This limits combining optimizations in certain circumstances but in
practice it's unlikely to be a hindrance.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D100660
When trying to clamp a constant index into a scalable vector we can
test if the index is less than the minimum number of elements in the
vector. If so, we can simply return the index because we know it is
guaranteed to fit inside the vector.
Differential Revision: https://reviews.llvm.org/D100639
Such attributes can either be unset, or set to "true" or "false" (as string).
throughout the codebase, this led to inelegant checks ranging from
if (Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
to
if (Fn->hasAttribute("no-jump-tables") && Fn->getFnAttribute("no-jump-tables").getValueAsString() == "true")
Introduce a getValueAsBool that normalize the check, with the following
behavior:
no attributes or attribute set to "false" => return false
attribute set to "true" => return true
Differential Revision: https://reviews.llvm.org/D99299
When we pass a AArch64 Homogeneous Floating-Point
Aggregate (HFA) argument with increased alignment
requirements, for example
struct S {
__attribute__ ((__aligned__(16))) double v[4];
};
Clang uses `[4 x double]` for the parameter, which is passed
on the stack at alignment 8, whereas it should be at
alignment 16, following Rule C.4 in
AAPCS (https://github.com/ARM-software/abi-aa/blob/master/aapcs64/aapcs64.rst#642parameter-passing-rules)
Currently we don't have a way to express in LLVM IR the
alignment requirements of the function arguments. The align
attribute is applicable to pointers only, and only for some
special ways of passing arguments (e..g byval). When
implementing AAPCS32/AAPCS64, clang resorts to dubious hacks
of coercing to types, which naturally have the needed
alignment. We don't have enough types to cover all the
cases, though.
This patch introduces a new use of the stackalign attribute
to control stack slot alignment, when and if an argument is
passed in memory.
The attribute align is left as an optimizer hint - it still
applies to pointer types only and pertains to the content of
the pointer, whereas the alignment of the pointer itself is
determined by the stackalign attribute.
For byval arguments, the stackalign attribute assumes the
role, previously perfomed by align, falling back to align if
stackalign` is absent.
On the clang side, when passing arguments using the "direct"
style (cf. `ABIArgInfo::Kind`), now we can optionally
specify an alignment, which is emitted as the new
`stackalign` attribute.
Patch by Momchil Velikov and Lucas Prates.
Differential Revision: https://reviews.llvm.org/D98794
The IR stack protector pass must insert stack checks before the call instead of
between it and the return.
Similarly, SDAG one should recognize that ADJCALLFRAME instructions could be
part of the terminal sequence of a tail call. In this case because such call
frames cannot be nested in LLVM the stack protection code must skip over the
whole sequence (or risk clobbering argument registers).
Main reason is preparation to transform AliasResult to class that contains
offset for PartialAlias case.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D98027
During SelectionDAG, we must track the SDNodes that each SDDbgValue depends on
to compute its value. These are ultimately derived from the location operands to
the SDDbgValue, but were stored in a separate vector prior to this patch. This
resulted in cases where one of the lists was updated incorrectly, resulting in
crashes during compilation. This patch fixes the issue by directly recomputing
the dependency list from the SDDbgOperands in getDependencies().
Differential Revision: https://reviews.llvm.org/D99423
This allows FoldConstantArithmetic to handle SPLAT_VECTOR in
addition to BUILD_VECTOR. This allows it to support scalable
vectors. I'm also allowing fixed length SPLAT_VECTOR which is
used by some targets, but I'm not familiar enough to write tests
for those targets.
I had to block this function from running on CONCAT_VECTORS to
avoid calling getNode for a CONCAT_VECTORS of 2 scalars.
This can happen because the 2 operand getNode calls this
function for any opcode. Previously we were protected because
CONCAT_VECTORs of BUILD_VECTOR is folded to a larger BUILD_VECTOR
before that call. But it's not always possible to fold a CONCAT_VECTORS
of SPLAT_VECTORs, and we don't even try.
This fixes PR49781 where DAG combine thought constant folding
should be possible, but FoldConstantArithmetic couldn't do it.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D99682
I do not see any bit-width restriction from the point of the
LLVM Lang Ref - Operand Bundles on the types of the deopt bundle
operands. Statepoint Lowering seems to be able to work with any
types.
This patch relaxes the two related assertions and adds a new test
for this change.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D100006
This is a followup to D98145: As far as I know, tracking of kill
flags in FastISel is just a compile-time optimization. However,
I'm not actually seeing any compile-time regression when removing
the tracking. This probably used to be more important in the past,
before FastRA was switched to allocate instructions in reverse
order, which means that it discovers kills as a matter of course.
As such, the kill tracking doesn't really seem to serve a purpose
anymore, and just adds additional complexity and potential for
errors. This patch removes it entirely. The primary changes are
dropping the hasTrivialKill() method and removing the kill
arguments from the emitFast methods. The rest is mechanical fixup.
Differential Revision: https://reviews.llvm.org/D98294
In order to bring up scalable vector support in LLVM incrementally,
we introduced behaviour to emit a warning, instead of an error, when
asking the wrong question of a scalable vector, like asking for the
fixed number of elements.
This patch puts that behaviour under a flag. The default behaviour is
that the compiler will always error, which means that all LLVM unit
tests and regression tests will now fail when a code-path is taken that
still uses the wrong interface.
The behaviour to demote an error to a warning can be individually enabled
for tools that want to support experimental use of scalable vectors.
This patch enables that behaviour when driving compilation from Clang.
This means that for users who want to try out scalable-vector support,
fixed-width codegen support, or build user-code with scalable vector
intrinsics, Clang will not crash and burn when the compiler encounters
such a case.
This allows us to do away with the following pattern in many of the SVE tests:
RUN: .... 2>%t
RUN: cat %t | FileCheck --check-prefix=WARN
WARN-NOT: warning: ...
The behaviour to emit warnings is only temporary and we expect this flag
to be removed in the future when scalable vector support is more stable.
This patch also has fixes the following tests:
unittests:
ScalableVectorMVTsTest.SizeQueries
SelectionDAGAddressAnalysisTest.unknownSizeFrameObjects
AArch64SelectionDAGTest.computeKnownBitsSVE_ZERO_EXTEND_VECTOR_INREG
regression tests:
Transforms/InstCombine/vscale_gep.ll
Reviewed By: paulwalker-arm, ctetreau
Differential Revision: https://reviews.llvm.org/D98856
If the inner shuffle already contains undef elements, then accept them in the merged shuffle as well.
This helps some X86 HADD/SUB patterns where slow targets were ending up with HADD/SUB because the (un)merged shuffles were stuck either side of the ADD/SUB - meaning we ended up with a total cost much higher than the "2*shuffle+add" that a slow target usually expands a HADD/SUB to.
This allows these optimisations to apply to e.g. `urem i16` directly
before `urem` is promoted to i32 on architectures where i16 operations
are not intrinsically legal (such as on Aarch64). The legalization then
later can happen more directly and generated code gets a chance to avoid
wasting time on computing results in types wider than necessary, in the end.
Seems like mostly an improvement in terms of results at least as far as x86_64 and aarch64 are concerned, with a few regressions here and there. It also helps in preventing regressions in changes like {D87976}.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D88785
Currently needsStackRealignment returns false if canRealignStack returns false.
This means that the behavior of needsStackRealignment does not correspond to
it's name and description; a function might need stack realignment, but if it
is not possible then this function returns false. Furthermore,
needsStackRealignment is not virtual and therefore some backends have made use
of canRealignStack to indicate whether a function needs stack realignment.
This patch attempts to clarify the situation by separating them and introducing
new names:
- shouldRealignStack - true if there is any reason the stack should be
realigned
- canRealignStack - true if we are still able to realign the stack (e.g. we
can still reserve/have reserved a frame pointer)
- hasStackRealignment = shouldRealignStack && canRealignStack (not target
customisable)
Targets can now override shouldRealignStack to indicate that stack realignment
is required.
This change will make it easier in a future change to handle the case where we
need to realign the stack but can't do so (for example when the register
allocator creates an aligned spill after the frame pointer has been
eliminated).
Differential Revision: https://reviews.llvm.org/D98716
Change-Id: Ib9a4d21728bf9d08a545b4365418d3ffe1af4d87
This is currently performed in SelectionDAGLegalize, here we make it also
happen in LegalizeVectorOps, allowing a target to lower the SETCC condition
codes first in LegalizeVectorOps and then lower to a custom node afterwards,
without having to duplicate all of the SETCC condition legalization in the
target specific lowering.
As a result of this, fixed length floating point SETCC nodes can now be
properly lowered for SVE.
Differential Revision: https://reviews.llvm.org/D98939
This patch adds a new isIntOrFPConstant helper function to check if a
SDValue is a integer of FP constant. This pattern is used in various
places.
There also are places that incorrectly just check for integer constants,
e.g. D99384, so hopefully this helper will help people avoid that issue.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D99428
This patch adds a new llvm.experimental.stepvector intrinsic,
which takes no arguments and returns a linear integer sequence of
values of the form <0, 1, ...>. It is primarily intended for
scalable vectors, although it will work for fixed width vectors
too. It is intended that later patches will make use of this
new intrinsic when vectorising induction variables, currently only
supported for fixed width. I've added a new CreateStepVector
method to the IRBuilder, which will generate a call to this
intrinsic for scalable vectors and fall back on creating a
ConstantVector for fixed width.
For scalable vectors this intrinsic is lowered to a new ISD node
called STEP_VECTOR, which takes a single constant integer argument
as the step. During lowering this argument is set to a value of 1.
The reason for this additional argument at the codegen level is
because in future patches we will introduce various generic DAG
combines such as
mul step_vector(1), 2 -> step_vector(2)
add step_vector(1), step_vector(1) -> step_vector(2)
shl step_vector(1), 1 -> step_vector(2)
etc.
that encourage a canonical format for all targets. This hopefully
means all other targets supporting scalable vectors can benefit
from this too.
I've added cost model tests for both fixed width and scalable
vectors:
llvm/test/Analysis/CostModel/AArch64/neon-stepvector.ll
llvm/test/Analysis/CostModel/AArch64/sve-stepvector.ll
as well as codegen lowering tests for fixed width and scalable
vectors:
llvm/test/CodeGen/AArch64/neon-stepvector.ll
llvm/test/CodeGen/AArch64/sve-stepvector.ll
See this thread for discussion of the intrinsic:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/147943.html
We've messed this up a few times recently on RISCV. Experiments
with these asserts found a couple issues on other targets as well.
They've all been cleaned up now so we can put in these asserts to
catch future issues
I had to waive Glue because ADDC/ADDE/etc legalization replaces
Glue with i32 on at least AArch64. X86 used to do the same before
we switched to ADDCARRY. So I guess that's just how that works.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D98979
Don't bother calling ComputeNumSignBits if N00Bits < ExtVTBits. No
matter what answer we get back this will be true:
(N00Bits - DAG.ComputeNumSignBits(N00, DemandedSrcElts)) < ExtVTBits)
So we might as well save the computation. This makes the code more
consistent with the similar (sext_in_reg (sext x)) handling above.
As commented by @craig.topper on rG1ba5c550d418, we can't guarantee that we'll be extending zero bits, just sign bit. So, revert to the old code for zero_extend_vector_inreg cases.
Reuse the existing KnownBits multiplication code to handle the 'extend + multiply + extract high bits' pattern for multiply-high ops.
Noticed while looking at the codegen for D88785 / D98587 - the patch helps division-by-constant expansion code in particular, which suggests that we might have some further KnownBits div/rem cases we could handle - but this was far easier to implement.
Differential Revision: https://reviews.llvm.org/D98857
Followup to D96345, handle unary shuffles of binops (as well as binary shuffles) if we can merge the shuffle with inner operand shuffles.
Differential Revision: https://reviews.llvm.org/D98646
Extend this to support ComputeNumSignBits of the (used) source vector elements so that we can handle more than just the case where we're sext_in_reg from the source element signbit.
Noticed while investigating the poor codegen in D98587.
Add ISD::ABS to the existing unary instructions handling for splat detection
This is similar to D83605, but doesn't appear to need to touch any of the wasm refactoring.
Differential Revision: https://reviews.llvm.org/D98778
Fixed section of code that iterated through a SmallDenseMap and added
instructions in each iteration, causing non-deterministic code; replaced
SmallDenseMap with MapVector to prevent non-determinism.
This reverts commit 01ac6d1587.
This caused non-deterministic compiler output; see comment on the
code review.
> This patch updates the various IR passes to correctly handle dbg.values with a
> DIArgList location. This patch does not actually allow DIArgLists to be produced
> by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
> Other than that, it should cover every IR pass.
>
> Most of the changes simply extend code that operated on a single debug value to
> operate on the list of debug values in the style of any_of, all_of, for_each,
> etc. Instances of setOperand(0, ...) have been replaced with with
> replaceVariableLocationOp, which takes the value that is being replaced as an
> additional argument. In places where this value isn't readily available, we have
> to track the old value through to the point where it gets replaced.
>
> Differential Revision: https://reviews.llvm.org/D88232
This reverts commit df69c69427.
This patch addresses a few issues when dealing with scalable-vector
INSERT_SUBVECTOR and EXTRACT_SUBVECTOR nodes.
When legalizing in DAGTypeLegalizer::SplitVecRes_INSERT_SUBVECTOR, we
store the low and high halves to the stack separately. The offset for
the high half was calculated incorrectly.
Additionally, we can optimize this process when we can detect that the
subvector is contained entirely within the low/high split vector type.
While this optimization is valid on scalable vectors, when performing
the 'high' optimization, the subvector must also be a scalable vector.
Note that the 'low' optimization is still conservative: it may be
possible to insert v2i32 into the low half of a split nxv1i32/nxv1i32,
but we can't guarantee it. It is always possible to insert v2i32 into
nxv2i32 or v2i32 into nxv4i32+2 as we know vscale is at least 1.
Lastly, in SelectionDAG::isSplatValue, we early-exit on the extracted subvector value
type being a scalable vector, forgetting that we can also extract a
fixed-length vector from a scalable one.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98495
A 1-bit smulo overflows is both inputs are -1 since the result
should be +1 which can't be represented in a signed 1 bit value.
We can detect this with an AND and a setcc. The multiply result
can also use the same AND.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D97634
Use a more general strategy when splitting a vector into scalar parts (and vice-versa) to correctly handle vector types whose element size is not a power of 2 (and a multiple of 8).
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D98273
This patch improves salvageDebugInfoImpl by allowing it to salvage arithmetic
operations with two or more non-const operands; this includes the GetElementPtr
instruction, and most Binary Operator instructions. These salvages produce
DIArgList locations and are only valid for dbg.values, as currently variadic
DIExpressions must use DW_OP_stack_value. This functionality is also only added
for salvageDebugInfoForDbgValues; other functions that directly call
salvageDebugInfoImpl (such as in ISel or Coroutine frame building) can be
updated in a later patch.
Differential Revision: https://reviews.llvm.org/D91722
Recently gc.result has been marked with readnone instead of readonly and
this opens a door for different optimization to duplicate gc.result.
Statepoint lowering is not ready to see several gc.results.
The problem appears when there are gc.results with one located in the same
basic block and another located in other basic block.
In this case we need both export VR and fill local setValue.
Note that this case is not sufficient optimization done before CodeGen.
It is evident that local gc.result dominates all other gc.results and it is handled
by GVN and EarlyCSE.
But anyway, even if IR is not optimal Backend should not crash on a valid IR.
Reviewers: reames, dantrushin
Reviewed By: dantrushin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D98393
On riscv32, i64 isn't a legal scalar type but we would like to
support scalable vectors of i64.
This patch introduces a new node that can represent a splat made
of multiple scalar values. I've used this new node to solve the current
crashes we experience when getConstant is used after type legalization.
For RISCV, we are now default expanding SPLAT_VECTOR to SPLAT_VECTOR_PARTS
when needed and then handling the SPLAT_VECTOR_PARTS later during
LegalizeOps. I've remove the special case I previously put in for
ABS for D97991 as the default expansion is now able to succesfully
use getConstant.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98004
If it was decided to relocate derived pointer using the spill its value is
not exported in general case.
When gc.relocate is located in an another block than a statepoint we cannot
get SD for derived value but for spill case it is not required at all.
However implementation of gc.relocate lowering unconditionally request SD value
causing the assert triggering.
The CL fixes this by handling spill case earlier than SD is really required.
Reviewers: reames, dantrushin
Reviewed By: dantrushin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D98324
All extractvalues of the same value at the same index will map to
the same register, so even if one specific extractvalue only has
one use, we should not mark it as a trivial kill, as there may be
more extractvalues later.
Fixes https://bugs.llvm.org/show_bug.cgi?id=49467.
Differential Revision: https://reviews.llvm.org/D98145
This patch updates the various IR passes to correctly handle dbg.values with a
DIArgList location. This patch does not actually allow DIArgLists to be produced
by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
Other than that, it should cover every IR pass.
Most of the changes simply extend code that operated on a single debug value to
operate on the list of debug values in the style of any_of, all_of, for_each,
etc. Instances of setOperand(0, ...) have been replaced with with
replaceVariableLocationOp, which takes the value that is being replaced as an
additional argument. In places where this value isn't readily available, we have
to track the old value through to the point where it gets replaced.
Differential Revision: https://reviews.llvm.org/D88232
This patch completes ISel support for DIArgList dbg.values by allowing
SDDbgValues with multiple location operands to be emitted as DBG_VALUE_LIST
instructions.
The primary change of this patch is refactoring EmitDbgValue by pulling location
operand emission out to the new function AddDbgValueLocationOps, which is used
for both DIArgList and single value dbg.values. Outside of that, the only
behaviour change is that the scheduler has a lambda added, HasUnknownVReg, to
prevent us from attempting to emit a DBG_VALUE_LIST before all of its used VRegs
have become available.
Differential Revision: https://reviews.llvm.org/D88592
This patch introduces a new intrinsic @llvm.experimental.vector.splice
that constructs a vector of the same type as the two input vectors,
based on a immediate where the sign of the immediate distinguishes two
variants. A positive immediate specifies an index into the first vector
and a negative immediate specifies the number of trailing elements to
extract from the first vector.
For example:
@llvm.experimental.vector.splice(<A,B,C,D>, <E,F,G,H>, 1) ==> <B, C, D, E> ; index
@llvm.experimental.vector.splice(<A,B,C,D>, <E,F,G,H>, -3) ==> <B, C, D, E> ; trailing element count
These intrinsics support both fixed and scalable vectors, where the
former is lowered to a shufflevector to maintain existing behaviour,
although while marked as experimental the recommended way to express
this operation for fixed-width vectors is to use shufflevector. For
scalable vectors where it is not possible to express a shufflevector
mask for this operation, a new ISD node has been implemented.
This is one of the named shufflevector intrinsics proposed on the
mailing-list in the RFC at [1].
Patch by Paul Walker and Cullen Rhodes.
[1] https://lists.llvm.org/pipermail/llvm-dev/2020-November/146864.html
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D94708
This patch adds partial support in Instruction Selection for dbg.values that use
a DIArgList. This patch does not add support for producing DBG_VALUE_LIST, but
adds the logic for processing DIArgLists within the ISel pass. This change is
largely focused on handleDebugValue and some of the functions that it calls.
Outside of this, salvageDebugInfo and transferDbgValues have been modified to
replace individual operands instead of the entire value; dangling debug info for
variadic debug values is not currently supported (but may be added later).
Differential Revision: https://reviews.llvm.org/D88589
Similar to the workaround code in ScalarizeVecRes_UnaryOp, ScalarizeVecRes_SETCC
, ScalarizeVecRes_VSELECT, etc.
If we have a case like this:
```
define <1 x half> @func(<1 x float> %x) {
%tmp = fptrunc <1 x float> %x to <1 x half>
ret <1 x half> %tmp
}
```
On AArch64, the <1 x float> is legal. So, this will crash if we call
GetScalarizedVector on it.
Differential Revision: https://reviews.llvm.org/D98208
This patch modifies the class that represents debug values during ISel,
SDDbgValue, to support multiple location operands (to represent a dbg.value that
uses a DIArgList). Part of this class's functionality has been split off into a
new class, SDDbgOperand.
The new class SDDbgOperand represents a single value, corresponding to an SSA
value or MachineOperand in the IR and MIR respectively. Members of SDDbgValue
that were previously related to that specific value (as opposed to the
variable or DIExpression), such as the Kind enum, have been moved to
SDDbgOperand. SDDbgValue now contains an array of SDDbgOperand instead, allowing
it to hold more than one of these values.
All changes outside SDDbgValue are simply updates to use the new interface.
Differential Revision: https://reviews.llvm.org/D88585
This patch updates DbgVariableIntrinsics to support use of a DIArgList for the
location operand, resulting in a significant change to its interface. This patch
does not update all IR passes to support multiple location operands in a
dbg.value; the only change is to update the DbgVariableIntrinsic interface and
its uses. All code outside of the intrinsic classes assumes that an intrinsic
will always have exactly one location operand; they will still support
DIArgLists, but only if they contain exactly one Value.
Among other changes, the setOperand and setArgOperand functions in
DbgVariableIntrinsic have been made private. This is to prevent code from
setting the operands of these intrinsics directly, which could easily result in
incorrect/invalid operands being set. This does not prevent these functions from
being called on a debug intrinsic at all, as they can still be called on any
CallInst pointer; it is assumed that any code directly setting the operands on a
generic call instruction is doing so safely. The intention for making these
functions private is to prevent DIArgLists from being overwritten by code that's
naively trying to replace one of the Values it points to, and also to fail fast
if a DbgVariableIntrinsic is updated to use a DIArgList without a valid
corresponding DIExpression.
The result of ISD::USUBSAT will never be larger than the LHS. We
can use this to put a bound on the number of leading zeros.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D98133
Implement the promotion rule for SELECT_CC nodes by upcasting all the parameters and downcasting the result.
The AArch64 target makes use of this rule and, since it was not implemented, in some cases the instruction selector would hit an assertion upon encountering the illegal node.
This patch requires D97840, the included test cases hit both problems.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97859
I'm not sure this would catch all such issues, but it would catch some.
The problem for PR49393 was that we were holding a reference to a node that
wasn't connect edto the DAG across a function that could delete unused nodes. In
this particular case we managed to try to use the deleted node while it was in
the deleted state before its memory got recycled.
It could also happen that we delete the node, something allocates a new node
which recycles the memory. Then we try to use the reference we were holding and
it is now a completely different node with different valid opcode. This patch
would not catch that.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D97969
For binary or ternary ops we call getNegatedExpression multiple
times and then compare costs. While we're doing this we need to
hold a node from the first call across the second call, but its
not yet attached to the DAG. Its possible the second call creates
an identical node and then decides it didn't need it so will try
to delete it if it has no uses. This can cause a reference to the
node we're holding further up the call stack to become invalidated.
To prevent this, we can use a HandleSDNode to artifically give
the node a use without connecting it to the DAG.
I've used a std::list of HandleSDNodes so we can create handles
only when we have a node to hold. HandleSDNode does not have
default constructor and cannot be copied or moved.
Fixes PR49393.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D97914
explicitly emitting retainRV or claimRV calls in the IR
This reapplies ed4718eccb, which was reverted
because it was causing a miscompile. The bug that was causing the miscompile
has been fixed in 75805dce5f.
Original commit message:
Background:
This fixes a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.attachedcall" to calls,
which indicates the call is implicitly followed by a marker
instruction and an implicit retainRV/claimRV call that consumes the
call result. In addition, it emits a call to
@llvm.objc.clang.arc.noop.use, which consumes the call result, to
prevent the middle-end passes from changing the return type of the
called function. This is currently done only when the target is arm64
and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
claimRV is attached to the call since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since the ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if retainRV is attached to the call and
does nothing if claimRV is attached to it.
- SCCP refrains from replacing the return value of a call with a
constant value if the call has the operand bundle. This ensures the
call always has at least one user (the call to
@llvm.objc.clang.arc.noop.use).
- This patch also fixes a bug in replaceUsesOfNonProtoConstant where
multiple operand bundles of the same kind were being added to a call.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
This caused miscompiles of Chromium tests for iOS due clobbering of live
registers. See discussion on the code review for details.
> Background:
>
> This fixes a longstanding problem where llvm breaks ARC's autorelease
> optimization (see the link below) by separating calls from the marker
> instructions or retainRV/claimRV calls. The backend changes are in
> https://reviews.llvm.org/D92569.
>
> https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
>
> What this patch does to fix the problem:
>
> - The front-end adds operand bundle "clang.arc.attachedcall" to calls,
> which indicates the call is implicitly followed by a marker
> instruction and an implicit retainRV/claimRV call that consumes the
> call result. In addition, it emits a call to
> @llvm.objc.clang.arc.noop.use, which consumes the call result, to
> prevent the middle-end passes from changing the return type of the
> called function. This is currently done only when the target is arm64
> and the optimization level is higher than -O0.
>
> - ARC optimizer temporarily emits retainRV/claimRV calls after the calls
> with the operand bundle in the IR and removes the inserted calls after
> processing the function.
>
> - ARC contract pass emits retainRV/claimRV calls after the call with the
> operand bundle. It doesn't remove the operand bundle on the call since
> the backend needs it to emit the marker instruction. The retainRV and
> claimRV calls are emitted late in the pipeline to prevent optimization
> passes from transforming the IR in a way that makes it harder for the
> ARC middle-end passes to figure out the def-use relationship between
> the call and the retainRV/claimRV calls (which is the cause of
> PR31925).
>
> - The function inliner removes an autoreleaseRV call in the callee if
> nothing in the callee prevents it from being paired up with the
> retainRV/claimRV call in the caller. It then inserts a release call if
> claimRV is attached to the call since autoreleaseRV+claimRV is
> equivalent to a release. If it cannot find an autoreleaseRV call, it
> tries to transfer the operand bundle to a function call in the callee.
> This is important since the ARC optimizer can remove the autoreleaseRV
> returning the callee result, which makes it impossible to pair it up
> with the retainRV/claimRV call in the caller. If that fails, it simply
> emits a retain call in the IR if retainRV is attached to the call and
> does nothing if claimRV is attached to it.
>
> - SCCP refrains from replacing the return value of a call with a
> constant value if the call has the operand bundle. This ensures the
> call always has at least one user (the call to
> @llvm.objc.clang.arc.noop.use).
>
> - This patch also fixes a bug in replaceUsesOfNonProtoConstant where
> multiple operand bundles of the same kind were being added to a call.
>
> Future work:
>
> - Use the operand bundle on x86-64.
>
> - Fix the auto upgrader to convert call+retainRV/claimRV pairs into
> calls with the operand bundles.
>
> rdar://71443534
>
> Differential Revision: https://reviews.llvm.org/D92808
This reverts commit ed4718eccb.
This function isn't exercised in lit tests today today according to
the code coverage report. But will be after the tests in D97543 and
D97559.
Posting this patch to help a crash that Fraser hit.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97582
This prepares codegen for a change that will remove the identical
folds from IR because they are not poison-safe. See
D93065 / D97360
for details.
We already generically support scalar types, and there are various
target-specific transforms that overlap the vector folds. For example,
x86 recognizes the and patterns, but not or. We can end up with 1
extra instruction there, but I think that is still preferred over the
blendv alternative that loads a constant vector.
If this is not optimal, then it should be fixed with a later transform
(this change is not expected to result in any regressions because
InstCombine currently does the same thing).
Removing custom code and supporting undefs in constant-pattern-matching
can be follow-up changes.
Differential Revision: https://reviews.llvm.org/D97730
The code previously used two BUILD_PAIRs to concatenate the two UMULO
results with 0s in the lower bits to match original VT. Then it created
an ADD and a UADDO with the original bit width. Each of those operations
need to be expanded since they have illegal types.
Since we put 0s in the lower bits before the ADD, the lower half of the
ADD result will be 0. So the lower half of the UADDO result is
solely determined by the other operand. Since the UADDO need to
be split in half, we don't really needd an operation for the lower
bits. Unfortunately, we don't see that in type legalization and end up
creating something more complicated and DAG combine or
lowering aren't always able to recover it.
This patch directly generates the narrower ADD and UADDO to avoid
needing to legalize them. Now only the MUL is done on the original
type.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D97440
This patch addresses issues arising from the fact that the index type
used for subvector insertion/extraction is inconsistent between the
intrinsics and SDNodes. The intrinsic forms require i64 whereas the
SDNodes use the type returned by SelectionDAG::getVectorIdxTy.
Rather than update the intrinsic definitions to use an overloaded index
type, this patch fixes the issue by transforming the index to the
correct type as required. Any loss of index bits going from i64 to a
smaller type is unexpected, and will be caught by an assertion in
SelectionDAG::getVectorIdxConstant.
The patch also updates the documentation for INSERT_SUBVECTOR and adds
an assertion to its creation to bring it in line with EXTRACT_SUBVECTOR.
This necessitated changes to AArch64 which was using i64 for
EXTRACT_SUBVECTOR but i32 for INSERT_SUBVECTOR. Only one test changed
its codegen after updating the backend accordingly.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D97459
Currently dead gc value mentioned in the deopt section are not listed in gc section
and so are processed separately.
With this CL all deopt gc values are considered as base pointers and processed in the
same way as other gc values.
The fact that deopt gc pointer is a base pointer was used all the time but
it is explicitly documented here by putting the value in SI.Base.
The idea of the patch comes from Philip Reames.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D97554
If the type of the deopt operand has an illegal type and we want to use
register for it then it needs to be legalized.
This is not supported currently by legalizer and it is not actually clear how to
legalize this type of values.
Instead we just spill such values and use spill slot location in statepoint.
Originally tests were created by Philip Reames.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D97541
Peeking through AND is only valid if the input to both shifts is
the same. If the inputs are different, then the original pattern
ORs the two values when the masked shift amount is 0. This is ok
if the values are the same since the OR would be a NOP which is
why its ok for rotate.
Fixes PR49365 and reverts PR34641
Differential Revision: https://reviews.llvm.org/D97637
Even if the first computeKnownBits call doesn't have any zero
bits it is possible the other operand has bitwidth-1 leading zero.
In that case overflow is still impossible. So always call computeKnownBits
for both operands.
D97247 added the reverse mapping from unwind destination to their
source, but it had a critical bug; sources can be multiple, because
multiple BBs can have a single BB as their unwind destination.
This changes `WasmEHFuncInfo::getUnwindSrc` to `getUnwindSrcs` and makes
it return a vector rather than a single BB. It does not return the const
reference to the existing vector but creates a new vector because
`WasmEHFuncInfo` stores not `BasicBlock*` or `MachineBasicBlock*` but
`PointerUnion` of them. Also I hoped to unify those methods for
`BasicBlock` and `MachineBasicBlock` into one using templates to reduce
duplication, but failed because various usages require `BasicBlock*` to
be `const` but it's hard to make it `const` for `MachineBasicBlock`
usages.
Fixes https://github.com/emscripten-core/emscripten/issues/13514.
(More precisely, fixes
https://github.com/emscripten-core/emscripten/issues/13514#issuecomment-784708744)
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D97583
Using ComputeNumSignBits or computeKnownBits we might be able
to determine that overflow is impossible.
This especially helps after type legalization if the type was
promoted from a type with half the bits or more. Type legalization
conservatively creates a promoted smulo/umulo and an overflow
check for the promoted bits. The overflow from the promoted
smulo/umulo is ORed with the result of the promoted bits
overflow check. Proving that the promoted smulo/umulo can never
overflow will leave us with just the promoted bits overflow check.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D97160
When calling SelectionDAG::getNode() to create an ADD or SUB
of two vectors with i1 element types we can canonicalise this
to use XOR instead, where 1+1 is treated as wrapping around
to 0 and 0-1 wraps to 1.
I've added the following tests for SVE targets:
CodeGen/AArch64/sve-pred-arith.ll
and modified some X86 tests to reflect the much simpler codegen
required.
Differential Revision: https://reviews.llvm.org/D97276
Rather than converting 3 signbits to bools and comparing them,
we can do bitwise logic on the whole vector and convert the
resulting sign bit to a bool at the end.
This is still a different algorithm than what we do in LegalizeDAG
through expandSADDOSSUBO. That algorithm needs to know that the
RHS of SSUBO is > 0, but that's costly when the type is split.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D97325
We know the input is going to be expanded as well, so we should
just ask for the already expanded operands. Otherwise we create
nodes that are just going to need to be legalized.
This CL is not big but contains changes that span multiple analyses and
passes. This description is very long because it tries to explain basics
on what each pass/analysis does and why we need this change on top of
that. Please feel free to skip parts that are not necessary for your
understanding.
---
`WasmEHFuncInfo` contains the mapping of <EH pad, the EH pad's next
unwind destination>. The value (unwind dest) here is where an exception
should end up when it is not caught by the key (EH pad). We record this
info in WasmEHPrepare to fix catch mismatches, because the CFG itself
does not have this info. A CFG only contains BBs and
predecessor-successor relationship between them, but in `WasmEHFuncInfo`
the unwind destination BB is not necessarily a successor or the key EH
pad BB. Their relationship can be intuitively explained by this C++ code
snippet:
```
try {
try {
foo();
} catch (int) { // EH pad
...
}
} catch (...) { // unwind destination
}
```
So when `foo()` throws, it goes to `catch (int)` first. But if it is not
caught by it, it ends up in the next unwind destination `catch (...)`.
This unwind destination is what you see in `catchswitch`'s
`unwind label %bb` part.
---
`WebAssemblyExceptionInfo` groups exceptions so that they can be sorted
continuously together in CFGSort, as we do for loops. What this analysis
does is very simple: it creates a single `WebAssemblyException` per EH
pad, and all BBs that are dominated by that EH pad are included in this
exception. We also identify subexception relationship in this way: if
EHPad A domiantes EHPad B, EHPad B's exception is a subexception of
EHPad A's exception.
This simple rule turns out to be incorrect in some cases. In
`WasmEHFuncInfo`, if EHPad A's unwind destination is EHPad B, it means
semantically EHPad B should not be included in EHPad A's exception,
because it does not make sense to rethrow/delegate to an inner scope.
This is what happened in CFGStackify as a result of this:
```
try
try
catch
... <- %dest_bb is among here!
end
delegate %dest_bb
```
So this patch adds a phase in `WebAssemblyExceptionInfo::recalculate` to
make sure excptions' unwind destinations are not subexceptions of
their unwind sources in `WasmEHFuncInfo`.
But this alone does not prevent `dest_bb` in the example above from
being sorted within the inner `catch`'s exception, even if its exception
is not a subexception of that `catch`'s exception anymore, because of
how CFGSort works, which will be explained below.
---
CFGSort places BBs within the same `SortRegion` (loop or exception)
continuously together so they can be demarcated with `loop`-`end_loop`
or `catch`-`end_try` in CFGStackify.
`SortRegion` is a wrapper for one of `MachineLoop` or
`WebAssemblyException`. `SortRegionInfo` already does some complicated
things because there discrepancies between those two data structures.
`WebAssemblyException` is what we control, and it is defined as an EH
pad as its header and BBs dominated by the header as its BBs (with a
newly added exception of unwind destinations explained in the previous
paragraph). But `MachineLoop` is an LLVM data structure and uses the
standard loop detection algorithm. So by the algorithm, BBs that are 1.
dominated by the loop header and 2. have a path back to its header.
Because of the second condition, many BBs that are dominated by the loop
header are not included in the loop. So BBs that contain `return` or
branches to outside of the loop are not technically included in
`MachineLoop`, but they can be sorted together with the loop with no
problem.
Maybe to relax the condition, in CFGSort, when we are in a `SortRegion`
we allow sorting of not only BBs that belong to the current innermost
region but also BBs that are by the current region header.
(This was written this way from the first version written by Dan, when
only loops existed.) But now, we have cases in exceptions when EHPad B
is the unwind destination for EHPad A, even if EHPad B is dominated by
EHPad A it should not be included in EHPad A's exception, and should not
be sorted within EHPad A.
One way to make things work, at least correctly, is change `dominates`
condition to `contains` condition for `SortRegion` when sorting BBs, but
this will change compilation results for existing non-EH code and I
can't be sure it will not degrade performance or code size. I think it
will degrade performance because it will force many BBs dominated by a
loop, which don't have the path back to the header, to be placed after
the loop and it will likely to create more branches and blocks.
So this does a little hacky check when adding BBs to `Preferred` list:
(`Preferred` list is a ready list. CFGSort maintains ready list in two
priority queues: `Preferred` and `Ready`. I'm not very sure why, but it
was written that way from the beginning. BBs are first added to
`Preferred` list and then some of them are pushed to `Ready` list, so
here we only need to guard condition for `Preferred` list.)
When adding a BB to `Preferred` list, we check if that BB is an unwind
destination of another BB. To do this, this adds the reverse mapping,
`UnwindDestToSrc`, and getter methods to `WasmEHFuncInfo`. And if the BB
is an unwind destination, it checks if the current stack of regions
(`Entries`) contains its source BB by traversing the stack backwards. If
we find its unwind source in there, we add the BB to its `Deferred`
list, to make sure that unwind destination BB is added to `Preferred`
list only after that region with the unwind source BB is sorted and
popped from the stack.
---
This does not contain a new test that crashes because of this bug, but
this fix changes the result for one of existing test case. This test
case didn't crash because it fortunately didn't contain `delegate` to
the incorrectly placed unwind destination BB.
Fixes https://github.com/emscripten-core/emscripten/issues/13514.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D97247
This code creates 3 setccs that need to be expanded. It was
creating a sign bit test as setge X, 0 which is non-canonical.
Canonical would be setgt X, -1. This misses the special case in
IntegerExpandSetCCOperands for sign bit tests that assumes
canonical form. If we don't hit this special case we end up
with a multipart setcc instead of just checking the sign of
the high part.
To fix this I've reversed the polarity of all of the setccs to
setlt X, 0 which is canonical. The rest of the logic should
still work. This seems to produce better code on RISCV which
lacks a setgt instruction.
This probably still isn't the best code sequence we could use here.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D97181
This renames variable and method names in `WasmEHFuncInfo` class to be
simpler and clearer. For example, unwind destinations are EH pads by
definition so it doesn't necessarily need to be included in every method
name. Also I am planning to add the reverse mapping in a later CL,
something like `UnwindDestToSrc`, so this renaming will make meanings
clearer.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D97173
This also removes a pattern from RISCV that is no longer needed
since the sexti32 on the LHS of the srem in the pattern implies
the result is sign extended so the sign_extend_inreg should be
removed in DAG combine now.
Reviewed By: luismarques, RKSimon
Differential Revision: https://reviews.llvm.org/D97133
This patch handles usubsat patterns hidden through zext/trunc and uses the getTruncatedUSUBSAT helper to determine if the USUBSAT can be correctly performed in the truncated form:
zext(x) >= y ? x - trunc(y) : 0 --> usubsat(x,trunc(umin(y,SatLimit)))
zext(x) > y ? x - trunc(y) : 0 --> usubsat(x,trunc(umin(y,SatLimit)))
Based on original examples:
void foo(unsigned short *p, int max, int n) {
int i;
unsigned m;
for (i = 0; i < n; i++) {
m = *--p;
*p = (unsigned short)(m >= max ? m-max : 0);
}
}
Differential Revision: https://reviews.llvm.org/D25987
If extload is legal, following transform
(zext (select c, load1, load2)) -> (select c, zextload1, zextload2)
can save one ext instruction.
Differential Revision: https://reviews.llvm.org/D95086
Adjust generateFMAsInMachineCombiner to return false if SVE is present
in order to combine fmul+fadd into fma. Also add new pseudo instructions
so as to select the most appropriate of FMLA/FMAD depending on register
allocation.
Depends on D96599
Differential Revision: https://reviews.llvm.org/D96424
Craig Topper