When lowering llvm::stackprotect intrinsic, the SDAG implementation
checks useLoadStackGuardNode() to either create a LOAD_STACK_GUARD or use
the first argument of the intrinsic. This check is not present in the
IRTranslator, which results in always generating a LOAD_STACK_GUARD even
if the target does not support it.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D129505
Noticed while investigating the SystemZ regressions in D77804, prefer handling the knownbits analysis/simplification in the bitop nodes directly before falling back to SimplifyMultipleUseDemandedBits
Verify the LiveStacks analysis after a pass that claims to preserve it,
even if there are no further passes (apart from the verifier itself)
that would use the analysis.
Differential Revision: https://reviews.llvm.org/D129200
visitInlineAsm() in SDAGBuilder was duplicating a lot of the code
in ParseConstraints(), in particular all the logic to determine the
operand value and constraint VT.
Rely on the data computed by ParseConstraints() instead, and update
its ConstraintVT implementation to match getCallOperandValEVT()
more precisely.
As far as I can tell what was happening in the original code is
that the getNode call receives the same operands as the original
node with different SDNodeFlags. The logic inside getNode detects
that the node already exists and intersects the flags into the
existing node and returns it. This results in Op and NewOp for the
TLO.CombineTo call always being the same node.
We may have already called CombineTo as part of the recursive handling.
A second call to CombineTo as we unwind the recursion overwrites
the previous CombineTo. I think this means any time we updated the
poison flags that was the only change that ends up getting made
and we relied on DAGCombiner to revisit and call SimplifyDemandedBits
again. The second time the poison flags wouldn't need to be dropped
and we would keep the CombineTo call from further down the recursion.
We can instead call setFlags to drop the poison flags and remove the
call to TLO.CombineTo. This way we keep the CombineTo from deeper in
the recursion which should be more efficient.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D129511
As suggested in the post-commit feedback for D128123,
we can ease the mask constraint to ignore the MSB
(and make the code easier to read by adjusting the check).
https://alive2.llvm.org/ce/z/bbvqWv
Pointed out in Issue #56432: the current reference models may not be
quite friendly to open source projects. Their purpose is only
illustrative - the expectation is that projects would train their own.
To avoid unintentionally pulling such a model, made the URL cmake
setting require explicit user setting.
Differential Revision: https://reviews.llvm.org/D129342
Currently, an error exists when InstrRefBasedLDV observes transfers of
variables across copies, which causes it to lose track of variables
under certain circumstances, resulting in shorter lifetimes for those
variables as LDV gives up searching for live locations for them. This
patch fixes this issue by storing the currently tracked values in
the destination first, then updating them manually later without
clobbering or assigning them the wrong value.
Differential Revision: https://reviews.llvm.org/D128101
This patch restores calls to has_value to make it clear that we are
checking the presence of an optional value, not the underlying value.
This patch partially reverts d08f34b592.
Differential Revision: https://reviews.llvm.org/D129454
D89489 added some logic to the interleaved access pass to attempt to
undo the folding of shuffles into binops, that instcombine performs. If
early-cse is run too, the binops may be commoned into a single operation
with multiple shuffle uses. It is still profitable reverse the transform
though, so long as all the uses are shuffles.
Differential Revision: https://reviews.llvm.org/D129419
(Reapply after revert in e9ce1a5880 due to
Fuchsia test failures. Removed changes in lib/ExecutionEngine/ other
than error categories, to be checked in more detail and reapplied
separately.)
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
We already handled this case for add with a constant RHS. A
similar pattern can occur for sub with a constant left hand side.
Test cases use add and a mul representing (neg (shl X, C)) because
that's what I saw in the wild. The mul will be decomposed and then
the new transform can kick in.
Tests have not been committed, but this patch shows the changes.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D128769
Originally encountered with RUST, but also there are cases with distributed LTO
where debug info dwo units contain structurally the same debug information, with
difference in DW_AT_linkage_name. This causes collision on DWO ID.
Differential Revision: https://reviews.llvm.org/D129317
SelectionDAG has a target hook, getExtendForAtomicOps, which it uses
in the computeKnownBits implementation for ATOMIC_LOAD. This is pretty
ugly (as is having a separate load opcode for atomics), so instead
allow making use of atomic zextload. Enable this for AArch64 since the
DAG path defaults in to the zext behavior.
The tablegen changes are pretty ugly, but partially helps migrate
SelectionDAG from using ISD::ATOMIC_LOAD to regular ISD::LOAD with
atomic memory operands. For now the DAG emitter will emit matchers for
patterns which the DAG will not produce.
I'm still a bit confused by the intent of the isLoad/isStore/isAtomic
bits. The DAG implementation rejects trying to use any of these in
combination. For now I've opted to make the isLoad checks also check
isAtomic, although I think having isLoad and isAtomic set on these
makes most sense.
If all the demanded bits of the AND mask covering the inserted subvector 'X' are known to be one, then the mask isn't affecting the subvector at all.
In which case, if the base vector 'C' is undef/constant, then move the AND mask up to just (constant) fold it directly.
Addresses some of the regressions from D129150, particularly the cases where we're attempting to zero the upper elements of a widened vector.
Differential Revision: https://reviews.llvm.org/D129290
After D82916 `updateAllRanges()` started to fix holes in main range with
subranges but it fails on instructions with two subregs def which are parts of
one reg. The main range constructed with //all// subranges of subregs just after
processing the first operand. So the main range gets intervals from subranges
those are not updated yet.
The patch takes into account lane mask to update the main range.
Reviewed By: rampitec, arsenm
Differential Revision: https://reviews.llvm.org/D128553
This is almost the same as the abandoned D48529, but it
allows splat vector constants too.
This replaces the x86-specific code that was added with
the alternate patch D48557 with the original generic
combine.
This transform is a less restricted form of an existing
InstCombine and the proposed SDAG equivalent for that
in D128080:
https://alive2.llvm.org/ce/z/OUm6N_
Differential Revision: https://reviews.llvm.org/D128123
This patchs adds a new metadata kind `exclude` which implies that the
global variable should be given the necessary flags during code
generation to not be included in the final executable. This is done
using the ``SHF_EXCLUDE`` flag on ELF for example. This should make it
easier to specify this flag on a variable without needing to explicitly
check the section name in the target backend.
Depends on D129053 D129052
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D129151
Currently we use the `.llvm.offloading` section to store device-side
objects inside the host, creating a fat binary. The contents of these
sections is currently determined by the name of the section while it
should ideally be determined by its type. This patch adds the new
`SHT_LLVM_OFFLOADING` section type to the ELF section types. Which
should make it easier to identify this specific data format.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D129052
This is done during type legalization since the target representation of
these nodes may not be valid until after type legalization, and after
type legalization the fact that these are dealing with i1 types may be
lost.
Differential Revision: https://reviews.llvm.org/D128996
Truncates and compares require some changes to generic legalisation functions
to use ElementCount instead of getNumElements.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D129082
Prior to this change, live variable operands passed to
`llvm.experimental.stackmap` would be emitted directly to target nodes,
meaning that they don't get legalised. The upshot of this is that LLVM
may crash when encountering illegally typed target nodes.
e.g. https://github.com/llvm/llvm-project/issues/21657
This change introduces a platform independent stackmap DAG node whose
operands are legalised as per usual, thus avoiding aforementioned
crashes.
Note that some kinds of argument are still not handled properly, namely
vectors, structs, and large integers, like i128s. These will need to be
addressed in follow-up changes.
Note also that this does not change the behaviour of
`llvm.experimental.patchpoint`. A follow up change will do the same for
this intrinsic.
Differential review:
https://reviews.llvm.org/D125680
This patch adds the support for `fmax` and `fmin` operations in `atomicrmw`
instruction. For now (at least in this patch), the instruction will be expanded
to CAS loop. There are already a couple of targets supporting the feature. I'll
create another patch(es) to enable them accordingly.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D127041
As constant expressions can no longer trap, it only makes sense to
call isSafeToSpeculativelyExecute on Instructions, so limit the
API to accept only them, rather than general Operators or Values.
As integer div/rem constant expressions are no longer supported,
constants can no longer trap and are always safe to speculate.
Remove the Constant::canTrap() method and its usages.
This removes the insertvalue constant expression, as part of
https://discourse.llvm.org/t/rfc-remove-most-constant-expressions/63179.
This is very similar to the extractvalue removal from D125795.
insertvalue is also not supported in bitcode, so no auto-ugprade
is necessary.
ConstantExpr::getInsertValue() can be replaced with
IRBuilder::CreateInsertValue() or ConstantFoldInsertValueInstruction(),
depending on whether a constant result is required (with the latter
being fallible).
The ConstantExpr::hasIndices() and ConstantExpr::getIndices()
methods also go away here, because there are no longer any constant
expressions with indices.
Differential Revision: https://reviews.llvm.org/D128719
variable with its multiple aliases.
This patch handles the case where a variable has
multiple aliases.
AIX's assembly directive .set is not usable for the
aliasing purpose, and using different labels allows
AIX to emulate symbol aliases. If a value is emitted
between any two labels, meaning they are not aligned,
XCOFF will automatically calculate the offset for them.
This patch implements:
1) Emits the label of the alias just before emitting
the value of the sub-element that the alias referred to.
2) A set of aliases that refers to the same offset
should be aligned.
3) We didn't emit aliasing labels for common and
zero-initialized local symbols in
PPCAIXAsmPrinter::emitGlobalVariableHelper, but
emitted linkage for them in
AsmPrinter::emitGlobalAlias, which caused a FAILURE.
This patch fixes the bug by blocking emitting linkage
for the alias without a label.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D124654
Before merging two instructions together, GISel does some sanity checks
that the folding is legal. However that check was missing that the
source of the pattern may be convergent. When the destination location
is in a different basic block, the folding is invalid.
Differential Revision: https://reviews.llvm.org/D128539
One motivation to add support for these types are the LD1Q/ST1Q
instructions in SME, for which we have defined a number of load/store
intrinsics which at the moment still take a `<vscale x 16 x i1>` predicate
regardless of their element type.
This patch adds basic support for the nxv1i1 type such that it can be passed/returned
from functions, as well as some basic support to support some existing tests that
result in a nxv1i1 type. It also adds support for splats.
Other operations (e.g. insert/extract subvector, logical ops, etc) will be
supported in follow-up patches.
Reviewed By: paulwalker-arm, efriedma
Differential Revision: https://reviews.llvm.org/D128665
In X86 we split greddy register allocation into 2 passes. The 1st pass
is to allocate tile register, and the 2nd pass is to allocate the rest
of virtual register. In most cases there is no tile register, so the 1st
pass is unnecessary. To improve the compiling time, we check if there is
any register need to be allocated by invoking callback
`ShouldAllocateClass`. If there is no register to be allocated, just
return false in the pass. This would improve the 1st greed RA pass for
normal cases.
Differential Revision: https://reviews.llvm.org/D128804
The filter clause in the landingpad may not have a GlobalVariable operand.
It may instead have a ConstantArray of operands and each operand within this
ConstantArray should also be checked to see if it is a GlobalVariable.
This patch add the check for the ConstantArray as well as a debug message that
outputs the contents of MustKeepGlobalVariables.
Reviewed By: lei, amyk, scui
Differential Revision: https://reviews.llvm.org/D128287
lowerConstant() currently accepts a number of constant expressions
which have corresponding MC expressions, but which cannot be
evaluated as a relocatable expression (unless the operands are
constant, in which case we'll just fold the expression to a constant).
The motivation here is to clarify which constant expressions are
really needed for https://discourse.llvm.org/t/rfc-remove-most-constant-expressions/63179,
and in particular clarify that we do not need to support any
division expressions, which are particularly problematic.
Differential Revision: https://reviews.llvm.org/D127972
When we fill the shape to tile configure memory, the shape is gotten
from AMX pseudo instruction. However the register for the shape may be
split or spilled by greedy RA. That cause we fill the shape to config
memory after ldtilecfg is executed, so that the shape configuration
would be wrong.
This patch is to split the tile register allocation from greedy register
allocation, so that after tile registers are allocated the shape
registers are still virtual register. The shape register only may be
redefined or multi-defined by phi elimination pass, two address pass.
That doesn't affect tile register configuration.
Differential Revision: https://reviews.llvm.org/D128584
Add a new pattern A - (B + C) ==> (A - B) - C to give machine combiner a chance
to evaluate which instruction sequence has lower latency.
Differential Revision: https://reviews.llvm.org/D124564
This is a resurrection of D106421 with the change that it keeps backward-compatibility. This means decoding the previous version of `LLVM_BB_ADDR_MAP` will work. This is required as the profile mapping tool is not released with LLVM (AutoFDO). As suggested by @jhenderson we rename the original section type value to `SHT_LLVM_BB_ADDR_MAP_V0` and assign a new value to the `SHT_LLVM_BB_ADDR_MAP` section type. The new encoding adds a version byte to each function entry to specify the encoding version for that function. This patch also adds a feature byte to be used with more flexibility in the future. An use-case example for the feature field is encoding multi-section functions more concisely using a different format.
Conceptually, the new encoding emits basic block offsets and sizes as label differences between each two consecutive basic block begin and end label. When decoding, offsets must be aggregated along with basic block sizes to calculate the final offsets of basic blocks relative to the function address.
This encoding uses smaller values compared to the existing one (offsets relative to function symbol).
Smaller values tend to occupy fewer bytes in ULEB128 encoding. As a result, we get about 17% total reduction in the size of the bb-address-map section (from about 11MB to 9MB for the clang PGO binary).
The extra two bytes (version and feature fields) incur a small 3% size overhead to the `LLVM_BB_ADDR_MAP` section size.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D121346
`commonAlignment` is a shortcut to pick the smallest of two `Align`
objects. As-is it doesn't bring much value compared to `std::min`.
Differential Revision: https://reviews.llvm.org/D128345
Information in the function `Prologue Data` is intentionally opaque.
When a function with `Prologue Data` is duplicated. The self (global
value) references inside `Prologue Data` is still pointing to the
original function. This may cause errors like `fatal error: error in backend: Cannot represent a difference across sections`.
This patch detaches the information from function `Prologue Data`
and attaches it to a function metadata node.
This and D116130 fix https://github.com/llvm/llvm-project/issues/49689.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D115844
This commit modifies the AsmPrinter to avoid emitting any zero-sized symbols to
the .debug_aranges table, by rounding their size up to 1. Entries with zero
length violate the DWARF 5 spec, which states:
> Each descriptor is a triple consisting of a segment selector, the beginning
> address within that segment of a range of text or data covered by some entry
> owned by the corresponding compilation unit, followed by the non-zero length
> of that range.
In practice, these zero-sized entries produce annoying warnings in lld and
cause GNU binutils to truncate the table when parsing it.
Other parts of LLVM, such as DWARFDebugARanges in the DebugInfo module
(specifically the appendRange method), already avoid emitting zero-sized
symbols to .debug_aranges, but not comprehensively in the AsmPrinter. In fact,
the AsmPrinter does try to avoid emitting such zero-sized symbols when labels
aren't involved, but doesn't when the symbol to emitted is a difference of two
labels; this patch extends that logic to handle the case in which the symbol is
defined via labels.
Furthermore, this patch fixes a bug in which `available_externally` symbols
would cause unpredictable values to be emitted into the `.debug_aranges` table
under certain circumstances. In practice I don't believe that this caused
issues up until now, but the root cause of this bug--an invalid DenseMap
lookup--triggered failures in Chromium when combined with an earlier version of
this patch. Therefore, this patch fixes that bug too.
This is a revised version of diff D126257, which was reverted due to breaking
tests. The now-reverted version of this patch didn't distinguish between
symbols that didn't have their size reported to the DwarfDebug handler and
those that had their size reported to be zero. This new version of the patch
instead restricts the special handling only to the symbols whose size is
definitively known to be zero.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D126835
These intrinsics are now fundemental for SVE code generation and have been
present for a year and a half, hence move them out of the experimental
namespace.
Differential Revision: https://reviews.llvm.org/D127976
Patch was reverted in 4c5f10a due to buildbot failures, now being
reapplied with updated AArch64 and RISCV tests.
This patch adds handling for the llvm.powi.* intrinsics in
BasicTTIImplBase::getIntrinsicInstrCost() and improves vectorization.
Closes#53887.
Differential Revision: https://reviews.llvm.org/D128172
If an instruction is sunk into a loop then any kill flags on
operands declared outside the loop must be cleared as these
will be live for all loop iterations.
Fixes#46827
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D126754
According to the vector spec, mf8 is not supported for i8 if ELEN
is 32. Similarily mf4 is not suported for i16/f16 or mf2 for i32/f32.
Since RVVBitsPerBlock is 64 and LMUL is calculated as
((MinNumElements * ElementSize) / RVVBitsPerBlock) this means we
need to disable any type with MinNumElements==1.
For generic IR, these types will now be widened in type legalization.
For RVV intrinsics, we'll probably hit a fatal error somewhere. I plan
to work on disabling the intrinsics in the riscv_vector.h header.
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D128286
waitcnt vmcnt instructions are currently generated in loop bodies before using
values loaded outside of the loop. In some cases, it is better to flush the
vmcnt counter in a loop preheader before entering the loop body. This patch
detects these cases and generates waitcnt instructions to flush the counter.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D115747
This reverts commit 719658d078.
Breaks a few things, see comments on https://reviews.llvm.org/D128437
There's disagreement about the best fix.
So let's keep HEAD green while discussions are happening.
The base RA support infrastructure that only allow a specific register
class be allocated in RA pss. Since greedy RA, basic RA derived from
base RA, they all allow allocating specific register class. Fast RA
doesn't support allocating register for specific register class. This
patch is to enable ShouldAllocateClass in fast RA, so that it can
support allocating register for specific register class.
Differential Revision: https://reviews.llvm.org/D126771
We're slowly removing SelectionDAG::GetDemandedBits and replacing it with SimplifyMultipleUseDemandedBits, we no longer have any uses for the vector demanded elt variant.
This patch adds handling for the llvm.powi.* intrinsics in
BasicTTIImplBase::getIntrinsicInstrCost() and improves vectorization.
Closes#53887.
Differential Revision: https://reviews.llvm.org/D128172
For below case, virtual register is defined twice in the self loop. We
don't need to spill %0 after the third instruction `%0 = def (tied %0)`,
because it is defined in the second instruction `%0 = def`.
1 bb.1
2 %0 = def
3 %0 = def (tied %0)
4 ...
5 jmp bb.1
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D125079
An AArch64ISD::DUP is just a splat, where the known bits for each lane
are the same as the input. This teaches that to computeKnownBitsForTargetNode.
Problems arise for constants though, as a constant BUILD_VECTOR can be
lowered to an AArch64ISD::DUP, which SimplifyDemandedBits would then
turn back into a constant BUILD_VECTOR leading to an infinite cycle.
This has been prevented by adding a isTargetCanonicalConstantNode node
to prevent the conversion back into a BUILD_VECTOR.
Differential Revision: https://reviews.llvm.org/D128144
Similar to the existing (shl (srl x, c1), c2) fold
Part of the work to fix the regressions in D77804
Differential Revision: https://reviews.llvm.org/D125836
The VT we want to shrink to may not be legal especially after type
legalization.
Fixes PR56110.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D128135
The included test hits a verifier problems as one of the instructions:
```
%113:tgpreven, %114:tgprodd = MVE_VMLSLDAVas16 %12:tgpreven(tied-def 0), %11:tgprodd(tied-def 1), %7:mqpr, %8:mqpr, 0, $noreg, $noreg
```
Has two inputs that come from different PHIs with the same base reg, but
conflicting regclasses:
```
%11:tgprodd = PHI %103:gpr, %bb.1, %16:gpr, %bb.2
%12:tgpreven = PHI %103:gpr, %bb.1, %17:gpr, %bb.2
```
The MachinePipeliner would attempt to use %103 for both the %11 and %12
operands in the prolog, constraining the register class to the common
subset of both. Unfortunately there are no registers that are both odd
and even, so the second constrainRegClass fails. Fix this situation by
inserting a COPY for the second if the call to constrainRegClass fails.
The register allocation can then fold that extra copy away. The register
allocation of Q regs changed with this test, but the R regs were the
same and no new instructions are needed in the final assembly.
Differential Revision: https://reviews.llvm.org/D127971
D125335 makes regsOverlap skip following control flow, which is not entended
in the original code.
Differential Revision: https://reviews.llvm.org/D128039
WidenVecOp_INSERT_SUBVECTOR only supported cases where widening
effectively converts the insert into a copy. However, when the
widened subvector is no bigger than the vector being inserted into
and we can be sure there's no loss of data, we can simply emit
another INSERT_SUBVECTOR.
Fixes: #54982
Differential Revision: https://reviews.llvm.org/D127508
MinRCSize is 4 and prevents constrainRegClass from changing the
register class if the new class has size less than 4.
IMPLICIT_DEF gets a unique vreg for each use and will be removed
by the ProcessImplicitDef pass before register allocation. I don't
think there is any reason to prevent constraining the virtual register
to whatever register class the use needs.
The attached test case was previously creating a copy of IMPLICIT_DEF
because vrm8nov0 has 3 registers in it.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D128005
This helps handling a case where the BUILD_VECTOR has i16 element type
and i32 constant operands
t2: v8i16 = setcc t8, t17, setult:ch
t3: v8i16 = BUILD_VECTOR Constant:i32<1>, ...
t4: v8i16 = and t2, t3
t5: v8i16 = add t8, t4
This can be turned into t5: v8i16 = sub t8, t2, and allows us to remove
t3 and t4 from the DAG.
Differential Revision: https://reviews.llvm.org/D127354
This reverts commit 7207373e1e.
We found another RISC-V bug when landing D126048, and it has been fixed
by D127642 now.
Differential Revision: https://reviews.llvm.org/D126048
This is needed by our downstream and makes bf16 and f16 have the
same set of scalable vector types.
Reviewed By: rui.zhang
Differential Revision: https://reviews.llvm.org/D127877
The use operand may be undefined. In that case we can just continue to
check the next operand since it won't increase register pressure.
Differential Revision: https://reviews.llvm.org/D127848
This is modeled after the half-precision fp support. Two new nodes are
introduced for casting from and to bf16. Since casting from bf16 is a
simple operation I opted to always directly lower it to integer
arithmetic. The other way round is more complicated if you want to
preserve IEEE semantics, so it's handled by a new __truncsfbf2
compiler-rt builtin.
This is of course very bare bones, but sufficient to get a semi-softened
fadd on x86.
Possible future improvements:
- Targets with bf16 conversion instructions can now make fp_to_bf16 legal
- The software conversion to bf16 can be replaced by a trivial
implementation under fast math.
Differential Revision: https://reviews.llvm.org/D126953
When compiling for the RWPI relocation model [1], the debug information
is wrong for readonly global variables.
Writable global variables are accessed by the static base register (R9
on ARM) in the RWPI relocation model. This is being correctly generated
Readonly global variables are not accessed by the static base register
in the RWPI relocation model. This case is incorrectly generating the
same debugging information as for writable global variables.
References:
[1] ARM Read-Write Position Independence: https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#read-write-position-independence-rwpi
Differential Revision: https://reviews.llvm.org/D126361
GetValueInMiddleOfBlock uses result of GetValueAtEndOfBlockInternal if there is no value
defined for current basic block.
If there is already a value it tries (in this order):
to find single register coming from all predecessors
find existing phi node which matches our incoming registers
build new phi.
The compile time improvement is to use current available value if
it is defined out of current BB or it is a PHI register.
This is due to it can be used in the middle basic block.
Reviewed By: sameerds
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D126523
When spilling CSRs, FixupStatepoint pass does simple copy propagation,
trying to find COPY instruction which defines register being spilled
and spill COPY source instead. I.e., if we have CSR $x and found
$x = COPY $y
we will spill $y instead.
But we may be unable to delete COPY instruction for some reason.
Then, spill will be inserted after it, adding another use of $y.
If COPY instruction was last use of $y (killed it), after insertion of
the spill it is not, so `isKill` flag must be cleared. We failed to do
so and this patch fixes this issue.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D127308
This is a fix for https://github.com/llvm/llvm-project/issues/55827.
When register we are trying to re-color is split the original register (we tried to recover)
has no uses after the split. However in rollback actions we assign back physical register to it.
Later it causes different assertions. One of them is in attached test.
This CL fixes this by avoiding assigning physical register back to register which has no usage
or its live interval now is empty.
Reviewed By: arsenm, qcolombet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D127281
The last of getEvictor use was removed on Jun 5, 2022 in commit
5c06f7168f, which was itself a patch to
remove unused code.
Once we remove getEvictor, EvictionTrack becomes a write-only data
structure. The data in it won't affect compilation, so the entire
class is essentially dead.
Another issue unearthed by D127115
We take a long time to canonicalize an insert_vector_elt chain before being able to convert it into a build_vector - even if they are already in ascending insertion order, we fold the nodes one at a time into the build_vector 'seed', leaving plenty of time for other folds to alter it (in particular recognising when they come from extract_vector_elt resulting in a shuffle_vector that is much harder to fold with).
D127115 makes this particularly difficult as we're almost guaranteed to have the lost the sequence before all possible insertions have been folded.
This patch proposes to begin at the last insertion and attempt to collect all the (oneuse) insertions right away and create the build_vector before its too late.
Differential Revision: https://reviews.llvm.org/D127595
This patch allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits in cases where the source operand has other uses, enabling us to peek through the shifted value if we don't demand all the bits/elts.
This helps with several of the regressions from D125836
Previously, omitting unnecessary DWARF unwinds was only done in two
cases:
* For Darwin + aarch64, if no DWARF unwind info is needed for all the
functions in a TU, then the `__eh_frame` section would be omitted
entirely. If any one function needed DWARF unwind, then MC would emit
DWARF unwind entries for all the functions in the TU.
* For watchOS, MC would omit DWARF unwind on a per-function basis, as
long as compact unwind was available for that function.
This diff makes it so that we omit DWARF unwind on a per-function basis
for Darwin + aarch64 as well. In addition, we introduce the flag
`--emit-dwarf-unwind=` which can toggle between `always`,
`no-compact-unwind` (only emit DWARF when CU cannot be emitted for a
given function), and the target platform `default`. `no-compact-unwind`
is particularly useful for newer x86_64 platforms: we don't want to omit
DWARF unwind for x86_64 in general due to possible backwards compat
issues, but we should make it possible for people to opt into this
behavior if they are only targeting newer platforms.
**Motivation:** I'm working on adding support for `__eh_frame` to LLD,
but I'm concerned that we would suffer a perf hit. Processing compact
unwind is already expensive, and that's a simpler format than EH frames.
Given that MC currently produces one EH frame entry for every compact
unwind entry, I don't think processing them will be cheap. I tried to do
something clever on LLD's end to drop the unnecessary EH frames at parse
time, but this made the code significantly more complex. So I'm looking
at fixing this at the MC level instead.
**Addendum:** It turns out that there was a latent bug in the X86
backend when `OmitDwarfIfHaveCompactUnwind` is naively enabled, which is
not too surprising given that this combination has not been heretofore
used.
For functions that have unwind info that cannot be encoded with CU, MC
would end up dropping both the compact unwind entry (OK; existing
behavior) as well as the DWARF entries (not OK). This diff fixes things
so that we emit the DWARF entry, as well as a CU entry with encoding
`UNWIND_X86_MODE_DWARF` -- this basically tells the unwinder to look for
the DWARF entry. I'm not 100% sure the `UNWIND_X86_MODE_DWARF` CU entry
is necessary, this was the simplest fix. ld64 seems to be able to handle
both the absence and presence of this CU entry. Ultimately ld64 (and
LLD) will synthesize `UNWIND_X86_MODE_DWARF` if it is absent, so there
is no impact to the final binary size.
Reviewed By: davide, lhames
Differential Revision: https://reviews.llvm.org/D122258
1. When checking if a candidate contains a CFI instruction, actually
iterate over all of the instructions, instead of stopping halfway
through.
2. Make sure copied CFI directives refer to the correct instruction.
Fixes https://github.com/llvm/llvm-project/issues/55842
Differential Revision: https://reviews.llvm.org/D126930
In the same spirit as D73543 and in reply to https://reviews.llvm.org/D126768#3549920 this patch is adding support for `__builtin_memset_inline`.
The idea is to get support from the compiler to easily write efficient memory function implementations.
This patch could be split in two:
- one for the LLVM part adding the `llvm.memset.inline.*` intrinsics.
- and another one for the Clang part providing the instrinsic as a builtin.
Differential Revision: https://reviews.llvm.org/D126903
D125887 changed the ctlz/cttz despeculation transform to insert
a freeze for the introduced branch on zero. While this does fix
the "branch on poison" issue, we may still get in trouble if we
pick a different value for the branch and for the ctz argument
(i.e. non-zero for the branch, but zero for the ctz). To avoid
this, we should use the same frozen value in both positions.
This does cause a regression in RISCV codegen by introducing an
additional sext. The DAG looks like this:
t0: ch = EntryToken
t2: i64,ch = CopyFromReg t0, Register:i64 %3
t4: i64 = AssertSext t2, ValueType:ch:i32
t23: i64 = freeze t4
t9: ch = CopyToReg t0, Register:i64 %0, t23
t16: ch = CopyToReg t0, Register:i64 %4, Constant:i64<32>
t18: ch = TokenFactor t9, t16
t25: i64 = sign_extend_inreg t23, ValueType:ch:i32
t24: i64 = setcc t25, Constant:i64<0>, seteq:ch
t28: i64 = and t24, Constant:i64<1>
t19: ch = brcond t18, t28, BasicBlock:ch<cond.end 0x8311f68>
t21: ch = br t19, BasicBlock:ch<cond.false 0x8311e80>
I don't see a really obvious way to improve this, as we can't push
the freeze past the AssertSext (which may produce poison).
Differential Revision: https://reviews.llvm.org/D126638
Clang-format InstructionSimplify and convert all "FunctionName"s to
"functionName". This patch does touch a lot of files but gets done with
the cleanup of InstructionSimplify in one commit.
This is the alternative to the less invasive clang-format only patch: D126783
Reviewed By: spatel, rengolin
Differential Revision: https://reviews.llvm.org/D126889
This should fix a number of shuffle regressions in D127115 where the re-ordered combines mean we fail to fold a EXTRACT_VECTOR_ELT/INSERT_VECTOR_ELT sequence into a BUILD_VECTOR if we extract from more than one vector source.
This matches what we do in IR. For the RISC-V test case, this allows
us to use -8 for the AND mask instead of materializing a constant in a register.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D127335
During lowering of memcmp/bcmp, the check for a size of 0 is done
in 2 different ways. In rare cases this can lead to a crash in
SystemZSelectionDAGInfo::EmitTargetCodeForMemcmp(). The root cause
is that SelectionDAGBuilder::visitMemCmpBCmpCall() checks for a
constant int value which is not yet evaluated. When the value is
turned into a SDValue, then the evaluation is done and results in
a ConstantSDNode. But EmitTargetCodeForMemcmp() expects the special
case of 0 length to be handled, which results in an assertion.
The fix is to turn the value into a SDValue, so that both functions
use the same check.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D126900
Summary:
We use the special section name `.llvm.offloading` to store device
imagees in the host object file. We want these to be stripped by the
linker as they are not used after linking so we use the `SHF_EXCLUDE`
flag to instruct the linker to drop them. We used to do this for all
sections that started with `.llvm.offloading` when we encoded metadata
in the section name itself. Now we embed a special binary containing the
metadata, we should only add the flag on this name specifically.
Extend the TypeWidenVector case of PromoteIntRes_BITCAST to work
with TypeSize directly rather than silently casting to unsigned.
To accomplish this I've extended TypeSize with an interface that
essentially allows TypeSize division when both operands have the
same number of dimensions.
There still exists combinations of scalable vector bitcasts that
cause compiler crashes. I call these out by adding "is missing"
entries to sve-bitcast.
Depends on D126957.
Fixes: #55114
Differential Revision: https://reviews.llvm.org/D127126
Bitcasting between unpacked scalable vector types of different
element counts is not a NOP because the live elements are laid out
differently.
01234567
e.g. nxv2i32 = XX??XX??
nxv4f16 = X?X?X?X?
Differential Revision: https://reviews.llvm.org/D126957
Spliter will try to extend a live range into `r` slot for a use operand,
that's works on most situaion, however that not work correctly when the operand
has tied to def, and the def operand is early clobber.
Give an example to demo what's wrong:
0 %0 = ...
16 early-clobber %0 = Op %0 (tied-def 0), ...
32 ... = Op %0
Before extend:
%0 = [0r, 0d) [16e, 32d)
The point we want to extend is 0d to 16e not 16r in this case, but if
we use 16r here we will extend nothing because that already contained
in [16e, 32d).
This patch add check for detect such case and adjust the extend point.
Detailed explanation for testcase: https://reviews.llvm.org/D126047
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D126048
As noticed on D127115 - we were missing this fold, instead just having the shuffle(shuffle(x,undef,splatmask),undef) fold. We should be able to merge these into one using SelectionDAG::isSplatValue, but we'll need to match the shuffle's undef handling first.
This also exposed an issue in SelectionDAG::isSplatValue which was incorrectly propagating the undef mask across a bitcast (it was trying to just bail with a APInt::isSubsetOf if it found any undefs but that was actually the wrong way around so didn't fire for partial undef cases).
Use the query that doesn't assert if TracksLiveness isn't set, which
needs to always be available. We also need to start printing liveins
regardless of TracksLiveness.
I can't remove the function just yet as it is used in the generated .inc files.
I would also like to provide a way to compare alignment with TypeSize since it came up a few times.
Differential Revision: https://reviews.llvm.org/D126910
These assert that there are no "useless" assertzext/assertsext nodes
(that assert a wider width than a following trunc), but I don't think
there is anything preventing such nodes from reaching this code.
I don't think the assertion is relevant for correctness of this
transform either -- if such an assert is present, then the other
one will always be to a smaller width, and we'll pick that one.
The assertion dates back to D37017.
Fixes https://github.com/llvm/llvm-project/issues/55846.
Differential Revision: https://reviews.llvm.org/D126952
Fixes a bug of us not correctly updating the terminator of the loop's
preheader, if multiple terminating branch instructions are present.
This is tested through existing tests. The bug itself is hard or not
possible to get exposed with the upstream Hexagon backend, because
the machine pipeliner checks for an existing preheader, which is
defined as a block with only 1 edge into the header.
The condition of this bug is a block into the loop with more than 1
edge, and not every downstream target checks for an existing preheader.
Differential Revision: https://reviews.llvm.org/D126386
Patch adds new GICombineRules for G_ADD:
G_ADD(x, G_SUB(y, x)) -> y
G_ADD(G_SUB(y, x), x) -> y
Patch additionally adds new combine tests for AArch64 target for
these new rules.
Reviewed by: paquette
Differential Revision: https://reviews.llvm.org/D87936
Move the code that was added for D126896 after the normal recursive calls
to computeKnownBits. This allows us to calculate trailing zeros.
Previously we would break out of the switch before the recursive calls.
Some cl::ZeroOrMore were added to avoid the `may only occur zero or one times!`
error. More were added due to cargo cult. Since the error has been removed,
cl::ZeroOrMore is unneeded.
Also remove cl::init(false) while touching the lines.
When promoting a shift, make sure we only fetch the second operand
after promoting the first. Load promotion may replace users of the
old load, and we don't want to be left with a dangling reference to
the old load instruction.
The crashing test case is from https://reviews.llvm.org/D126689#3553212.
Differential Revision: https://reviews.llvm.org/D126886
If C is non-negative, the result of the smax must also be
non-negative, so all sign bits of the result are 0.
This allows DAGCombiner to remove a zext_inreg in the modified test.
This zext_inreg started as a sext that became zext before type
legalization then was promoted to a zext_inreg.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D126896
Adds MVT::v128i2, MVT::v64i4, and implied MVT::i2, MVT::i4.
Keeps MVT::i2, MVT::i4 lowering actions as expand, which should be
removed once targets set this explicitly.
Adjusts 11 lit tests to reflect slightly different behavior during
DAG combine.
Differential Revision: https://reviews.llvm.org/D125247
Even if CSR list is same between functions, we could have had a different
allocation order if ignoreCSRForAllocationOrder is evaluated differently.
Hence invalidate cached register class information if
ignoreCSRForAllocationOrder changes.
Patch by Srividya Karumuri <srividya_karumuri@apple.com>
Differential Revision: https://reviews.llvm.org/D126565
Adds MVT::v128i2, MVT::v64i4, and implied MVT::i2, MVT::i4.
Keeps MVT::i2, MVT::i4 lowering actions as `expand`, which should be
removed once targets set this explicitly.
Adjusts 11 lit tests to reflect slightly different behavior during
DAG combine.
Differential Revision: https://reviews.llvm.org/D125247
D124631 added special processing for STATEPOINT instructions.
It appears that assertion added there is too strong. We can get two
tied operands with the same register tied to different defs. If we
hit such case, do not process it in statepoint-specific code and
delegate it to common case.
Avoid the dependency on TargetInstrInfo, which depends on the subtarget
and therefore the individual function.
Currently AMDGPU is constructing PseudoSourceValue instances in MachineFunctionInfo.
In order to facilitate copying MachineFunctionInfo, we need to stop allocating these
there. Alternatively we could allow targets to subclass PseudoSourceValueManager,
and allocate them similarly to MachineFunctionInfo.
This includes .seh_* directives for generating it from assembly.
It is designed fairly similarly to the ARM64 handling.
For .seh_handler directives, such as
".seh_handler __C_specific_handler, @except" (which is supported
on x86_64 and aarch64 so far), the "@except" bit doesn't work in
ARM assembly, as '@' is used as a comment character (on all current
platforms).
Allow using '%' instead of '@' for this purpose. This convention
is used by GAS in similar contexts already,
e.g. [1]:
Note on targets where the @ character is the start of a comment
(eg ARM) then another character is used instead. For example the
ARM port uses the % character.
In practice, this unfortunately means that all such .seh_handler
directives will need ifdefs for ARM.
Contrary to ARM64, on ARM, it's quite common that we can't evaluate
e.g. the function length at this point, due to instructions whose
length is finalized later. (Also, inline jump tables end with
a ".p2align 1".)
If unable to to evaluate the function length immediately, emit
it as an MCExpr instead. If we'd implement splitting the unwind
info for a function (which isn't implemented for ARM64 yet either),
we wouldn't know whether we need to split it though.
Avoid calling getFrameIndexOffset() on an unset
FuncInfo.UnwindHelpFrameIdx, to avoid triggering asserts in the
preexisting testcase CodeGen/ARM/Windows/wineh-basic.ll. (Once
MSVC exception handling is fully implemented, those changes
can be reverted.)
[1] https://sourceware.org/binutils/docs/as/Section.html#Section
Differential Revision: https://reviews.llvm.org/D125645
This reverts commit 256a52d9aa (and
also the follow-up commit 38eb4fe74b that moved a test
case to a different directory).
As discussed in https://reviews.llvm.org/D126257 there is a suspicion
that something was wrong with this commit as text section range was
shortened to 1 byte rather than rounded up as shown in the
llvm/test/DebugInfo/X86/dwarf-aranges.ll test case.
STATEPOINT is a special pseudo instruction which represent Moving GC semantic to LLVM.
Every tied def/use VReg pair in STATEPOINT represent same physical register which can
'magically' change during call wrapped by statepoint.
(By construction, tied use operand is not live across STATEPOINT).
This means that when converting into two-address form, there is not need to insert COPY
instruction before stateppoint, what TwoAddressInstruction pass does for 'regular'
instructions.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D124631
VP intrinsics show UB if the %evl parameter is out of bounds - they must
not carry the speculatable attribute. The out-of-bounds UB disappears
when the %evl parameter is expanded into the mask or expansion replaces
the entire VP intrinsic with non-VP code.
This patch
- Removes the speculatable attribute on all VP intrinsics.
- Generalizes the isSafeToSpeculativelyExecute function to let VP
expansion know whether the VP intrinsic replacement will be
speculatable. VP expansion may only discard %evl where this is the
case.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D125296
This relands commit 4d8d2580c5.
The major change here is using 'addUsedIfAvailable<BasicBlockSectionsProfileReader>()` to make sure we don't change the pipeline tests.
Differential Revision: https://reviews.llvm.org/D126518
Today, text section prefixes (none, .unlikely, .hot, and .unkown) are determined based on PGO profile. However, Propeller may deem a function hot when PGO doesn't. Besides, when `-Wl,-keep-text-section-prefix=true` Propeller cannot enforce a global section ordering as the linker can only reorder sections within each output section (.text, .text.hot, .text.unlikely).
This patch promotes all functions with Propeller profiles (functions listed in the basic-block-sections profile) to .text.hot. The feature is hidden behind the flag `--bbsections-guided-section-prefix` which defaults to `true`.
The new implementation refactors the parsing of basic block sections profile into a new `BasicBlockSectionsProfileReader` analysis pass. This allows us to use the information earlier in `CodeGenPrepare` in order to set the functions text prefix. `BasicBlockSectionsProfileReader` will be used both by `BasicBlockSections` pass and `CodeGenPrepare`.
Differential Revision: https://reviews.llvm.org/D122930
With a fix for an expensive checks build failure exposed by new RISC-V tests.
Something about expanding two rotates in type legalization caused a change
in the remapping tables that the expensive checks verifying wasn't expecting.
See comment in the code for how it was fixed.
Tests came from this commit that exposed the bug
[RISCV] Add test cases showing failure to remove mask on rotate amounts.
If the masking AND has multiple users we fail to remove it.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D126036
treated as Copy instruction in MCP.
This is then used in AArch64 to remove copy instructions after taildup
ran in machine block placement
Differential Revision: https://reviews.llvm.org/D125335
reapply 62a9b36fcf and fix module build
failue:
1: remove MachineCycleInfoWrapperPass in MachinePassRegistry.def
MachineCycleInfoWrapperPass is a anylysis pass, should not be there.
2: move the definition for MachineCycleInfoPrinterPass to cpp file.
Otherwise, there are module conflicit for MachineCycleInfoWrapperPass
in MachinePassRegistry.def and MachineCycleAnalysis.h after
62a9b36fcf.
MachineCycle can handle irreducible loop. Natural loop
analysis (MachineLoop) can not return correct loop depth if
the loop is irreducible loop. And MachineSink is sensitive
to the loop depth, see MachineSinking::isProfitableToSinkTo().
This patch tries to use MachineCycle so that we can handle
irreducible loop better.
Reviewed By: sameerds, MatzeB
Differential Revision: https://reviews.llvm.org/D123995
This commit modifies the AsmPrinter to avoid emitting any zero-sized symbols to
the .debug_aranges table, by rounding their size up to 1. Entries with zero
length violate the DWARF 5 spec, which states:
> Each descriptor is a triple consisting of a segment selector, the beginning
> address within that segment of a range of text or data covered by some entry
> owned by the corresponding compilation unit, followed by the non-zero length
> of that range.
In practice, these zero-sized entries produce annoying warnings in lld and
cause GNU binutils to truncate the table when parsing it.
Other parts of LLVM, such as DWARFDebugARanges in the DebugInfo module
(specifically the appendRange method), already avoid emitting zero-sized
symbols to .debug_aranges, but not comprehensively in the AsmPrinter. In fact,
the AsmPrinter does try to avoid emitting such zero-sized symbols when labels
aren't involved, but doesn't when the symbol to emitted is a difference of two
labels; this patch extends that logic to handle the case in which the symbol is
defined via labels.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D126257
This adds support for pointer types for `atomic xchg` and let us write
instructions such as `atomicrmw xchg i64** %0, i64* %1 seq_cst`. This
is similar to the patch for allowing atomicrmw xchg on floating point
types: https://reviews.llvm.org/D52416.
Differential Revision: https://reviews.llvm.org/D124728
When expanding VP reductions to non VP-code, the reduction pass was
ignoring the mask before. Fix this by keeping the mask and selecting
neutral elements where the mask is zero.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D126362
Use container::size_type directly to avoid type mismatch causing build failures in Windows.
Original commit message:
This patch optimizes the transformation of selects to a branch when the heuristics deemed it profitable.
It aggressively sinks eligible instructions to the newly created true/false blocks to prevent their
execution on the common path and interleaves dependence slices to maximize ILP.
Depends on D120232
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D120233
The second argument to is_fp_class specifies the set of floating-point
class to test against. It can be zero, in this case the intrinsic is
expected to return zero value.
Differential Revision: https://reviews.llvm.org/D112025
Followup to D125988 - FPOW is similar to FREM and will most likely scalarize to libcalls, so unroll before widening to prevent use making additional libcalls with UNDEF args.
Any zext 'sink' should already have an operand that is in the legal
value, so avoid using a trunc and just use the trunc operand instead.
Differential Revision: https://reviews.llvm.org/D118905
Currently, two element vectors produced as the result of a binary op are
widened to four element vectors on x86 by
DAGTypeLegalizer::WidenVecRes_BinaryCanTrap. If the op still isn't legal
after widening it is unrolled into 4 scalar ops in SelectionDAG before
being converted into a libcall. This way we end up with 4 libcalls (two of
them on known undef elements) instead of the original two libcalls.
This patch modifies DAGTypeLegalizer::WidenVectorResult to ensure that if
it is known that a binary op will be tunred into a libcall, it is unrolled
instead of being widened. This prevents the creation of the extra scalar
instructions on known undef elements and (eventually) libacalls with known
undef parameters which would otherwise be created when the op gets expanded
post widening.
Differential Revision: https://reviews.llvm.org/D125988
Kai Nacke