A later change will add a 3rd user, so factoring out the common code
seems useful.
Reorganizing the executeInWaterfallLoop causes some more COPYs to be
generated, but those all fold away during instruction selection.
Generating the comparisons uses generic instructions over machine
instructions now which admittedly shouldn't make a difference
(though it should make it easier to move the waterfall loop generation
to another place).
(Resubmit with missing test added.)
Differential Revision: https://reviews.llvm.org/D125324
A later change will add a 3rd user, so factoring out the common code
seems useful.
Reorganizing the executeInWaterfallLoop causes some more COPYs to be
generated, but those all fold away during instruction selection.
Generating the comparisons uses generic instructions over machine
instructions now which admittedly shouldn't make a difference
(though it should make it easier to move the waterfall loop generation
to another place).
Differential Revision: https://reviews.llvm.org/D125324
Even though single address image instructions only use a single VGPR
HW accesses 4 or 5 which creates alignment requirement.
Fixes: SWDEV-316648
Differential Revision: https://reviews.llvm.org/D126009
This brings the MachineInstrs in line with the corresponding intrinsics
which have side effects but do not access memory. It also matches how
BUF cache invalidation instructions are defined.
The lit test changes are just because the machine scheduler previously
treated them like loads, and added an artificial scheduling edge from
them to the exit SU, which caused them to be scheduled earlier.
Differential Revision: https://reviews.llvm.org/D126074
Extend SIInstrInfo::isOperandLegal to enforce a limit on the number of
literal operands for all VALU instructions, not just VOP3. In particular
it now handles VOP2 instructions with a mandatory literal operand like
V_FMAAK_F32.
Differential Revision: https://reviews.llvm.org/D126064
Extend the literal operand checking in SIInstrInfo::verifyInstruction to
check VOP2 instructions like V_FMAAK_F32 which have a mandatory literal
operand. The rule is that src0 can also be a literal, but only if it is
the same literal value.
AMDGPUAsmParser::validateConstantBusLimitations already handles this
correctly.
Differential Revision: https://reviews.llvm.org/D126063
It is already marked as having side effects, at least in MIR. It does
not interact with anything else that is modelled as a memory access
either in IR or MachineIR.
Differential Revision: https://reviews.llvm.org/D125985
s_getreg does not interact with anything else that is modelled as a
memory access either in IR or MachineIR.
Differential Revision: https://reviews.llvm.org/D125968
AMDGPUAsmParser::validateSOPLiteral already knew about this but
SIInstrInfo::verifyInstruction did not.
Differential Revision: https://reviews.llvm.org/D125976
Most clients only used these methods because they wanted to be able to
extend or truncate to the same bit width (which is a no-op). Now that
the standard zext, sext and trunc allow this, there is no reason to use
the OrSelf versions.
The OrSelf versions additionally have the strange behaviour of allowing
extending to a *smaller* width, or truncating to a *larger* width, which
are also treated as no-ops. A small amount of client code relied on this
(ConstantRange::castOp and MicrosoftCXXNameMangler::mangleNumber) and
needed rewriting.
Differential Revision: https://reviews.llvm.org/D125557
Fold immediates regardless of how many uses they have. This is expected
to increase overall code size, but decrease register usage.
Differential Revision: https://reviews.llvm.org/D114644
Previously SIFoldOperands::foldInstOperand would only fold a
non-inlinable immediate into a single user, so as not to increase code
size by adding the same 32-bit literal operand to many instructions.
This patch removes that restriction, so that a non-inlinable immediate
will be folded into any number of users. The rationale is:
- It reduces the number of registers used for holding constant values,
which might increase occupancy. (On the other hand, many of these
registers are SGPRs which no longer affect occupancy on GFX10+.)
- It reduces ALU stalls between the instruction that loads a constant
into a register, and the instruction that uses it.
- The above benefits are expected to outweigh any increase in code size.
Differential Revision: https://reviews.llvm.org/D114643
We always had global and scratch loads to LDS in the gfx9,
but did not handle it. These were available via the 'lds'
encoding bit. In gfx940 this bit was reused as 'svs' which
resulted in new '_lds' opcodes effectively pushing this
bit into the opcode, but functionally it is the same. These
instructions are also available on gfx10.
Differential Revision: https://reviews.llvm.org/D125126
MC layer support for SOP(scalar alu operations) including encoding
support for s_delay_alu and s_sendmsg_rtn.
Contributors:
Jay Foad <jay.foad@amd.com>
Patch 7/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125319
Reviewed By: #amdgpu, arsenm
Differential Revision: https://reviews.llvm.org/D125498
This reverts ffbee7acdc, see also bug 37653 which it was fixing.
The bug claims this is an undocumented feature which actually works.
In the reality it is documented as not working for a good reason.
It likely does something, but it is useless anyway. These instructions
write into the LDS. The LDS address is:
M0 + inst_offset + (TIDinWave * 4).
For a store wider than a DWORD neighboring lanes will overwrite each
other.
Differential Revision: https://reviews.llvm.org/D125409
On GFX10 VOP3 instructions can have a literal operand, so the conversion
from VOP3 MAD/FMA to VOP2 MADAK/MADMK/FMAAK/FMAMK will not happen in
SIFoldOperands. The only benefit of the VOP2 form is code size, so do it
in SIShrinkInstructions instead.
Differential Revision: https://reviews.llvm.org/D125567
Includes MachineCode layer support and tests, and MIR tests not requiring
CodeGen pass changes.
Includes a small change in SMInstructions.td to correct encoded bits.
Contributors:
Petar Avramovic <Petar.Avramovic@amd.com>
Dmitry Preobrazhensky <dmitry.preobrazhensky@amd.com>
Depends on D125316
Patch 6/N for upstreaming of AMDGPU gfx11 architecture.
Reviewed By: dp, Petar.Avramovic
Differential Revision: https://reviews.llvm.org/D125319
The name `MCFixedLenDisassembler.h` is out of date after D120958.
Rename it as `MCDecoderOps.h` to reflect the change.
Reviewed By: myhsu
Differential Revision: https://reviews.llvm.org/D124987
Adds an intrinsic/builtin that can be used to fine tune scheduler behavior. If
there is a need to have highly optimized codegen and kernel developers have
knowledge of inter-wave runtime behavior which is unknown to the compiler this
builtin can be used to tune scheduling.
This intrinsic creates a barrier between scheduling regions. The immediate
parameter is a mask to determine the types of instructions that should be
prevented from crossing the sched_barrier. In this initial patch, there are only
two variations. A mask of 0 means that no instructions may be scheduled across
the sched_barrier. A mask of 1 means that non-memory, non-side-effect inducing
instructions may cross the sched_barrier.
Note that this intrinsic is only meant to work with the scheduling passes. Any
other transformations that may move code will not be impacted in the ways
described above.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D124700
Refactor to pass a templatized size parameter to the decoder to allow wider than
64bit decodes in a later patch.
Contributors:
Jay Foad <jay.foad@amd.com>
Depends on D125261
Patch 5/N for upstreaming of AMDGPU gfx11 architecture.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D125316
Tablegen definitions for subtarget features and cpp predicate functions to
access the features.
New Sub-TargetProcessors and common latencies.
Simple changes to MIR codegen tests which pass on gfx11 because they have the
same output as previous subtargets or operate on pseudo instructions which
are reused from previous subtargets.
Contributors:
Jay Foad <jay.foad@amd.com>
Petar Avramovic <Petar.Avramovic@amd.com>
Patch 4/N for upstreaming of AMDGPU gfx11 architecture
Depends on D124538
Reviewed By: Petar.Avramovic, foad
Differential Revision: https://reviews.llvm.org/D125261
This patch adds cluster edges between independent MFMA instructions. Additionally, it propogates all predecessors of cluster insts to the root of the cluster(s), and all successors to the leaf(ves) of the cluster(s) -- this is done to remove the possibility that those insts will be interspersed within the cluster.
Reviewed By: kerbowa
Differential Revision: https://reviews.llvm.org/D124678
Only fold for uniform values on pre-GFX9 chips. GFX9+ allow us
to keep the calculation entirely on the SALU.
For subtargets where integer multiplication isn't full-rate, avoid
folding if the multiply has too many uses.
Finally, we expand 64x32 and 64x64 multiplies here as well, if they
feed into an addition. This results in better code generation than
the generic expansion for such multiplies because we end up using
the accumulator of the MAD instructions.
Differential Revision: https://reviews.llvm.org/D123835
As suggested by @foad on D124839
If we're extracting a vector element that originally came from a scalar_to_vector, then avoid the bitcasting of a vector type and perform the shift masking on the (any-extended) scalar source directly, making use of the fact that the upper elements of a scalar_to_vector are all undef.
Differential Revision: https://reviews.llvm.org/D125173
FeatureAtomicFaddInsts is replaced with three more granular features.
Contributors:
Petar Avramovic <Petar.Avramovic@amd.com>
Patch 3/N for upstreaming of AMDGPU gfx11 architecture
Depends on D124537
Reviewed By: foad, #amdgpu, arsenm
Differential Revision: https://reviews.llvm.org/D124538
Given a DPP mov like this:
%2:vgpr_32 = V_MOV_B32_e32 0, implicit $exec
...
%3:vgpr_32 = V_MOV_B32_dpp %2, %1, 1, 1, 1, 0, implicit $exec
this patch just removes a check that %2 (the "old reg") was defined in
the same BB as the DPP mov instruction. GCNDPPCombine requires that the
MIR is in SSA form so I don't understand why the BB matters.
This lets the optimization work in more real world cases when the
definition of %2 gets hoisted out of a loop.
Differential Revision: https://reviews.llvm.org/D124182
Image.sample instruction can be forced to return half type instead of
float when d16 flag is enabled.
This patch adds new pattern in InstCombine to detect if output of
image.sample is used later only by fptrunc which converts the type
from float to half. If pattern is detected then fptrunc and image.sample
are combined to single image.sample which is returning half type.
Later in Lowering part d16 flag is added to image sample intrinsic.
Differential Revision: https://reviews.llvm.org/D124232
Introduces a string attribute, amdgpu-requires-module-lds, to allow
eliding the module.lds block from kernels. Will allocate the block as before
if the attribute is missing or has its default value of true.
Patch uses the new attribute to detect the simplest possible instance of this,
where a kernel makes no calls and thus cannot call any functions that use LDS.
Tests updated to match, coverage was already good. Interesting cases is in
lower-module-lds-offsets where annotating the kernel allows the backend to pick
a different (in this case better) variable ordering than previously. A later
patch will avoid moving kernel variables into module.lds when the kernel can
have this attribute, allowing optimal ordering and locally unused variable
elimination.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D122091
by moving around the code and by adding more comments, which would
later help during any required clean-up.
Differential Revision: https://reviews.llvm.org/D124733
Refactor to simplify a follow-up change.
No functional change intended. However, there is a rather subtle logic
change: the subsequent combines (e.g. reassociation) are skipped *always*
when one of the operands of the add is a mul, instead of only when
additionally mad64_32 etc. are available. This change makes sense because
the subsequent combines should never apply when one of the operands is a
mul.
Differential Revision: https://reviews.llvm.org/D123833
MUBUF and FLAT LDS DMA operations need a wait on vmcnt before LDS written
can be accessed. A load from LDS to VMEM does not need a wait.
Differential Revision: https://reviews.llvm.org/D124626
This is the first patch of a series to upstream support for the new
subtarget.
Contributors:
Jay Foad <jay.foad@amd.com>
Konstantin Zhuravlyov <kzhuravl_dev@outlook.com>
Patch 1/N for upstreaming AMDGPU gfx11 architectures.
Reviewed By: foad, kzhuravl, #amdgpu
Differential Revision: https://reviews.llvm.org/D124536
As older waves execute long sequences of VALU instructions, this may
prevent younger waves from address calculation and then issuing their
VMEM loads, which in turn leads the VALU unit to idle. This patch tries
to prevent this by temporarily raising the wave's priority.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D124246
Add these bits to the MUBUF and FLAT LDS DMA instructions:
- LGKM_CNT - these operate on LDS;
- VALU - SPG 3.9.8: This instruction acts as both a MUBUF and
VALU instruction;
Codegen currently does not produce any of this, so the change is NFC.
Differential Revision: https://reviews.llvm.org/D124472
Image.sample instruction can be forced to return half type instead of
float when d16 flag is enabled.
This patch adds new pattern in InstCombine to detect if output of
image.sample is used later only by fptrunc which converts the type
from float to half. If pattern is detected then fptrunc and image.sample
are combined to single image.sample which is returning half type.
Later in Lowering part d16 flag is added to image sample intrinsic.
Differential Revision: https://reviews.llvm.org/D124232
The builtin predicate handling has a strange behavior where the code
assumes that a PatFrag is a stack of PatFrags, and each level adds at
most one predicate. I don't think this particularly makes sense,
especially without a diagnostic to ensure you aren't trying to set
multiple at once.
This wasn't followed for address spaces and alignment, which could
potentially fall through to report no builtin predicate was
added. Just switch these to follow the existing convention for now.
Currently metadata is inserted in a late pass which is lowered
to an AssertZext. The metadata would be more useful if it was
inserted earlier after inlining, but before codegen.
Probably shouldn't change anything now. Just replacing the
late metadata annotation needs more work, since we lose
out on optimizations after these are lowered to CopyFromReg.
Seems to be slightly better than relying on the AssertZext from the
metadata. The test change in cvt_f32_ubyte.ll is a quirk from it using
-start-before=amdgpu-isel instead of running the usual codegen
pipeline.
This is to avoid relying on the post-isel hook.
This change also enable the saddr pattern selection for atomic
intrinsics in GlobalISel.
Differential Revision: https://reviews.llvm.org/D123583
Here is the performance data:
```
Using platform: AMD Accelerated Parallel Processing
Using device: gfx900:xnack-
ds_write_b64 aligned by 8: 3.2 sec
ds_write2_b32 aligned by 8: 3.2 sec
ds_write_b16 * 4 aligned by 8: 7.0 sec
ds_write_b8 * 8 aligned by 8: 13.2 sec
ds_write_b64 aligned by 1: 7.3 sec
ds_write2_b32 aligned by 1: 7.5 sec
ds_write_b16 * 4 aligned by 1: 14.0 sec
ds_write_b8 * 8 aligned by 1: 13.2 sec
ds_write_b64 aligned by 2: 7.3 sec
ds_write2_b32 aligned by 2: 7.5 sec
ds_write_b16 * 4 aligned by 2: 7.1 sec
ds_write_b8 * 8 aligned by 2: 13.3 sec
ds_write_b64 aligned by 4: 4.6 sec
ds_write2_b32 aligned by 4: 3.2 sec
ds_write_b16 * 4 aligned by 4: 7.1 sec
ds_write_b8 * 8 aligned by 4: 13.3 sec
ds_read_b64 aligned by 8: 2.3 sec
ds_read2_b32 aligned by 8: 2.2 sec
ds_read_u16 * 4 aligned by 8: 4.8 sec
ds_read_u8 * 8 aligned by 8: 8.6 sec
ds_read_b64 aligned by 1: 4.4 sec
ds_read2_b32 aligned by 1: 7.3 sec
ds_read_u16 * 4 aligned by 1: 14.0 sec
ds_read_u8 * 8 aligned by 1: 8.7 sec
ds_read_b64 aligned by 2: 4.4 sec
ds_read2_b32 aligned by 2: 7.3 sec
ds_read_u16 * 4 aligned by 2: 4.8 sec
ds_read_u8 * 8 aligned by 2: 8.7 sec
ds_read_b64 aligned by 4: 4.4 sec
ds_read2_b32 aligned by 4: 2.3 sec
ds_read_u16 * 4 aligned by 4: 4.8 sec
ds_read_u8 * 8 aligned by 4: 8.7 sec
Using platform: AMD Accelerated Parallel Processing
Using device: gfx1030
ds_write_b64 aligned by 8: 4.4 sec
ds_write2_b32 aligned by 8: 4.3 sec
ds_write_b16 * 4 aligned by 8: 7.9 sec
ds_write_b8 * 8 aligned by 8: 13.0 sec
ds_write_b64 aligned by 1: 23.2 sec
ds_write2_b32 aligned by 1: 23.1 sec
ds_write_b16 * 4 aligned by 1: 44.0 sec
ds_write_b8 * 8 aligned by 1: 13.0 sec
ds_write_b64 aligned by 2: 23.2 sec
ds_write2_b32 aligned by 2: 23.1 sec
ds_write_b16 * 4 aligned by 2: 7.9 sec
ds_write_b8 * 8 aligned by 2: 13.1 sec
ds_write_b64 aligned by 4: 13.5 sec
ds_write2_b32 aligned by 4: 4.3 sec
ds_write_b16 * 4 aligned by 4: 7.9 sec
ds_write_b8 * 8 aligned by 4: 13.1 sec
ds_read_b64 aligned by 8: 3.5 sec
ds_read2_b32 aligned by 8: 3.4 sec
ds_read_u16 * 4 aligned by 8: 5.3 sec
ds_read_u8 * 8 aligned by 8: 8.5 sec
ds_read_b64 aligned by 1: 13.1 sec
ds_read2_b32 aligned by 1: 22.7 sec
ds_read_u16 * 4 aligned by 1: 43.9 sec
ds_read_u8 * 8 aligned by 1: 7.9 sec
ds_read_b64 aligned by 2: 13.1 sec
ds_read2_b32 aligned by 2: 22.7 sec
ds_read_u16 * 4 aligned by 2: 5.6 sec
ds_read_u8 * 8 aligned by 2: 7.9 sec
ds_read_b64 aligned by 4: 13.1 sec
ds_read2_b32 aligned by 4: 3.4 sec
ds_read_u16 * 4 aligned by 4: 5.6 sec
ds_read_u8 * 8 aligned by 4: 7.9 sec
```
GFX10 exposes a different pattern for sub-DWORD load/store performance
than GFX9. On GFX9 it is faster to issue a single unaligned load or
store than a fully split b8 access, where on GFX10 even a full split
is better. However, this is a theoretical only gain because splitting
an access to a sub-dword level will require more registers and packing/
unpacking logic, so ignoring this option it is better to use a single
64 bit instruction on a misaligned data with the exception of 4 byte
aligned data where ds_read2_b32/ds_write2_b32 is better.
Differential Revision: https://reviews.llvm.org/D123956
Fix isVCC for register that was assigned register class during
inst-selection. This happens when register has multiple uses.
For wave32, uniform i1 to vcc copy was selected like vcc to vcc
copy when uniform i1 had assigned register class.
Uniform i1 register with assigned register class will have s1 LLT,
be defined using G_TRUNC and class will be SReg_32RegClass.
Vcc i1 register with assigned register class will have s1 LLT,
class will be SReg_32RegClass for wave32 and SReg_64RegClass for
wave64 and register will not be defined by G_TRUNC.
Differential Revision: https://reviews.llvm.org/D124163
This fixes the assertion failure "Loop in the Block Graph!".
SIMachineScheduler groups instructions into blocks (also referred to
as coloring or groups) and then performs a two-level scheduling:
inter-block scheduling, and intra-block scheduling.
This approach requires that the dependency graph on the blocks which
is obtained by contracting the blocks in the original dependency graph
is acyclic. In other words: Whenever A and B end up in the same block,
all vertices on a path from A to B must be in the same block.
When compiling an example consisting of an export followed by
a buffer store, we see a dependency between these two. This dependency
may be false, but that is a different issue.
This dependency was not correctly accounted for by SiMachineScheduler.
A new test case si-scheduler-exports.ll demonstrating this is
also added in this commit.
The problematic part of SiMachineScheduler was a post-optimization of
the block assignment that tried to group all export instructions into
a separate export block for better execution performance. This routine
correctly checked that any paths from exports to exports did not
contain any non-exports, but not vice-versa: In case of an export with
a non-export successor dependency, that single export was moved
to a separate block, which could then be both a successor and a
predecessor block of a non-export block.
As fix, we now skip export grouping if there are exports with direct
non-export successor dependencies. This fixes the issue at hand,
but is slightly pessimistic:
We *could* group all exports into a separate block that have neither
direct nor indirect export successor dependencies.
We will review the potential performance impact and potentially
revisit with a more sophisticated implementation.
Note that just grouping all exports without direct non-export successor
dependencies could still lead to illegal blocks, since non-export A
could depend on export B that depends on export C. In that case,
export C has no non-export successor, but still may not be grouped
into an export block.
Based on available register budget, reserve highest available VGPR for
AGPR copy before RA. After RA, shift it to lowest unused VGPR if the one
exist.
Fixes SWDEV-330006.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D123525
When folding a COPY of exec into another COPY, the call to
TII->isOperandLegal would crash because COPYs don't have defined
register classes for their operands.
Differential Revision: https://reviews.llvm.org/D122737
These don't seem to be very well used or tested, but try to make the
behavior a bit more consistent with LDS globals.
I'm not sure what the definition for amdgpu-gds-size is supposed to
mean. For now I assumed it's allocating a static size at the beginning
of the allocation, and any known globals are allocated after it.
There's no reason to create these immediately. They can be created in
the prolog/epilog code like CSR spills. There's probably a cleaner way
to do this by utilizing the CSR spill code.
This makes the frame index used transient state for
PrologEpilogInserter, and thus makes serialization easier. Really this
doesn't need to be saved here but there isn't really a better place
for it.
The sramecc feature changes the behaviour of d16 loads so they do not
preserve the unused 16 bits of the result register, but it has no impact
on d16 stores, so we should make use of them even when the feature is
enabled.
Differential Revision: https://reviews.llvm.org/D104912
Instead of lengthy constructors we can now set the members of a
read-only struct before the Attributor is created. Should make it
clearer what is configurable and also help introducing new options in
the future. This actually added IsModulePass and avoids deduction
through the Function set size. No functional change was intended.
This is an NFC patch in preparation to fix a bug related to always
reserving VGPR32 for AGPR copy.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D123651
This code was pattern matching the ID computation expression as it
appears in the library. This was a compare and select, but now that
umin is canonical, we were no longer matching. Update to match the
intrinsic instead.
For stores to constant address space, this will now consistently hit a
selection error instead of hitting unreachable in an asserts build.
I'm not sure what we should really do here. We could either just
codegen as if it were global, delete the instruction, or declare the
IR invalid (we really should have a target IR verifier to enforce it).
Summary:
Introduce a new function attribute, amdgpu-no-multigrid-sync-arg, which is default.
We use implicitarg_ptr + offset to check whether the multigrid synchronization
pointer is used. If yes, we remove this attribute and also remove
amdgpu-no-implicitarg-ptr. We generate metadata for the hidden_multigrid_sync_arg
only when the amdgpu-no-multigrid-sync-arg attribute is removed from the function.
Reviewers: arsenm, sameerds, b-sumner and foad
Differential Revision: https://reviews.llvm.org/D123548
Use default member initializers in AMDGPUSubtarget and subclasses. This
is to guard against adding a new feature boolean in AMDGPUSubtarget.h
but forgetting to initialize it to false in AMDGPUSubtarget.cpp.
This was mostly autogenerated by:
clang-tidy -checks=-*,cppcoreguidelines-prefer-member-initializer,modernize-use-default-member-init -header-filter=Subtarget -fix lib/Target/AMDGPU/*Subtarget.cpp
Differential Revision: https://reviews.llvm.org/D123613
Move features/bugs checks into the single place
allowsMisalignedMemoryAccessesImpl.
This is mostly NFCI except for the order of selection in couple places.
A separate change may be needed to stop lying about Fast.
Differential Revision: https://reviews.llvm.org/D123343
If the CFG structure of a waterfall loop is not the expected shape
then gracefully abort traversing the IR for the given loop.
This applies to nest waterfall loops which are not supported by
the VGPR live range optimizer.
Reviewed By: ruiling
Differential Revision: https://reviews.llvm.org/D123480
Summary:
In emitting metadata for implicit kernel arguments, we need to be in sync with the actual loads
to align the implicit kernel argument segment to 8 byte boundary. In this work, we simply force
this alignment through the first implicit argument.
In addition, we don't emit metadata for any implicit kernel argument if none of them is actually used.
Reviewers: arsenm, b-sumner
Differential Revision: https://reviews.llvm.org/D123346
The AMDGPUISD::SETCC node is like ISD::SETCC, but returns a lane mask
instead of a per-lane boolean. The lane mask is uniform.
This improves instruction selection for code patterns like
ctpop(ballot(x)), which can now use an S_BCNT1_* instruction instead
of V_BCNT_*.
GlobalISel already selects scalar instructions (an earlier commit
added a test case)..
Differential Revision: https://reviews.llvm.org/D123432
D67148 has removed TTI::getNumberOfRegisters(bool Vector) and
started to call TTI::getNumberOfRegisters(unsigned ClassID) from
the LoopVectorize. This has resulted in an unrestricted vectorization
on AMDGPU blowing up register pressure.
Differential Revision: https://reviews.llvm.org/D122850
Enable the PreRARematerialize pass when there are multiple high RP scheduling
regions present. Require the occupancy in all high RP regions be improved
before finalizing sinking. If any high RP region did not improve in occupancy
then un-do all sinking and restore the state to before the pass.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D122501
We found that it might be beneficial to have the SIOptimizeExecMasking
pass detect more cases where v_cmp, s_and_saveexec patterns can be
transformed to s_mov, v_cmpx patterns. Currently, the search range
for finding a fitting v_cmp instruction is 5, however, this is doubled
to 10 here.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D123367
Currently, the utility supports lowering of non atomic memory transfer routines only. This patch adds support for atomic version of memcopy. This may be useful for targets not supporting atomic memcopy.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D118443
It was only handled for FLAT initially because we did not have
unaligned DS instructions lowering. Now it is implemented but
the bug is not handled.
Differential Revision: https://reviews.llvm.org/D123338
There is no need to fully scalarize an unaligned operation in
some case, just split it to alignment.
Differential Revision: https://reviews.llvm.org/D123330
Summary:
If implicitarg_ptr intrinsic is not used, set implicit kernarg size to 0, otherwise
set it to 256 bytes for code object version 5 (and beyond).
Reviewers: arsenm
Differential Revision: https://reviews.llvm.org/D123262
Use new NotAtomic expansion to turn these into the equivalent
non-atomic operations. Independent lanes cannot access the private
memory of other lanes, so there's no possibility for synchronization.
These don't really appear directly in user code, but
InferAddressSpaces can make these appear after optimizations.
Fixes issues 54693 and 54274.
static_cast is a little safer here since the compiler will
ensure we're casting to a class derived from
yaml::MachineFunctionInfo.
I believe this first appeared on AMDGPU and was copied to the
other two targets.
Spotted when it was being copied to RISCV in D123178.
Differential Revision: https://reviews.llvm.org/D123260
Handle the llvm.r600.* intrinsics which are still in use in libclc. I
thought it would be possible to switch it to using
llvm.amdgcn.implicitarg.ptr already, but it turns out the implicit
arguments are currently split into a piece before and after the
explicit kernel arguments.
The diagnostic is unreliable, and triggers even for dead uses of
hostcall that may exist when linking the device-libs at lower
optimization levels.
Eliminate the diagnostic, and directly document the limitation for
OpenCL before code object V5.
Make some NFC changes to clarify the related code in the
MetadataStreamer.
Add a clang test to tie OCL sources containing printf to the backend IR
tests for this situation.
Reviewed By: sameerds, arsenm, yaxunl
Differential Revision: https://reviews.llvm.org/D121951
Ignore all debug uses when collecting trivially rematerializable defs. This fixes an issue with difference in codegen when enabling debug info.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D123048
Previously any load (global, local or constant) feeding into a
global load or store would be counted as an indirect access. This
patch only counts global loads feeding into a global load or store.
The rationale is that the latency for global loads is generally
much larger than the other kinds.
As a side effect this makes it easier to write small kernels test
cases that are not counted as having indirect accesses, despite
the fact that arguments to the kernel are accessed with an SMEM
load.
Differential Revision: https://reviews.llvm.org/D122804
Whenever a v_cmp, s_and_saveexec instruction sequence shall be
transformed to an equivalent s_mov, v_cmpx sequence, it needs
to be detected if the v_cmp target register is used between
the two instructions as the v_cmp result gets omitted by
using the v_cmpx instruction, resulting in invalid code.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D122797
Summary:
To compute the size of a VALU/SALU instruction, we need to check whether an operand
could ever be literal. Previously isLiteralConstant was used, which missed cases
like global variables or external symbols. These misses lead to under-estimation of
the instruction size and branch offset, and thus incorrectly skip the necessary branch
relaxation when the branch offset is actually greater than what the branch bits can hold.
In this work, we use isLiteralConstantLike to check the operands. It maybe conservative,
but it is safe.
Reviewers: arsenm
Differential Revision: https://reviews.llvm.org/D122778
Summary:
hasHostcallPtr() and hasHeapPtr() are only used in metadata emit.
However, we can use the corresponding function attributes directly
instead introducing the functions.
Reviewers: arsenm
Differential Revision: https://reviews.llvm.org/D122600
Revision https://reviews.llvm.org/D122332 added a pattern transformation
where v_cmpx instructions are introduced. However, the modifiers are
not correctly inherited from the original operands. The patch
adds the source modifiers, if they are exist, or sets them to 0.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D122489
Split waterfall loops into multiple blocks so that exec mask
manipulation (s_and_saveexec) does not occur in the middle of
a block.
VGPR live range optimizer is updated to handle waterfall loops
spanning multiple blocks.
Reviewed By: ruiling
Differential Revision: https://reviews.llvm.org/D122200
All LLVM backends use MCDisassembler as a base class for their
instruction decoders. Use "const MCDisassembler *" for the decoder
instead of "const void *". Remove unnecessary static casts.
Reviewed By: skan
Differential Revision: https://reviews.llvm.org/D122245
On GFX10.3 targets, the following instruction sequence
v_cmp_* SGPR, ...
s_and_saveexec ..., SGPR
leads to a fairly long stall caused by a VALU write to a SGPR and having the
following SALU wait for the SGPR.
An equivalent sequence is to save the exec mask manually instead of letting
s_and_saveexec do the work and use a v_cmpx instruction instead to do the
comparison.
This patch modifies the SIOptimizeExecMasking pass as this is the last position
where s_and_saveexec instructions are inserted. It does the transformation by
trying to find the pattern, extracting the operands and generating the new
instruction sequence.
It also changes some existing lit tests and introduces a few new tests to show
the changed behavior on GFX10.3 targets.
Same as D119696 including a buildbot and MIR test fix.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D122332
Since there is a table introduced for MAI instructions extend it
to use for DGEMM classification.
Differential Revision: https://reviews.llvm.org/D122337
In some cases padding bubbles between sequential MFMA instructions may
lead to increased inter-wave performance. Add option to request to pad
some portion of these stall cycles with s_nops.
Fixes: SWDEV-326925
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D121437
and, also update the function indirectCopyToAGPR() to ensure that it is called only on GFX908 sub-target.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D122286
First, add code to reserve all required special purpose registers,
followed by code to reserve SGPRs, followed by code to reserve
VGPRs/AGPRs.
This patch is prepared as a pre-requisite to fix an issue related to
GFX90A hardware.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D122219
In the frame index lowering we have to insert shift and add
instructions to adjust stack object access. We need to take care of the stack
object user kind and use scalar shift/add for scalar users.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D121524
In the frame index lowering we have to insert shift and add
instructions to adjust stack object access. We need to take care of the stack
object user kind and use scalar shift/add for scalar users.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D121524
BUILD_VECTOR of i16 and undef gets expanded to the COPY_TO_REGCLASS.
The latter is further lowererd to the copy instructions.
We need to provide the correct register class for the uniform and divergent BUILD_VECTOR nodes
to avoid VGPR to SGPR copies.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D122068
Simplify some for loops. Don't bother checking src2 operand for
writelane because it doesn't have one. Check all VALU instructions,
not just VOP1/2/3/C/SDWA.
On GFX10.3 targets, the following instruction sequence
v_cmp_* SGPR, ...
s_and_saveexec ..., SGPR
leads to a fairly long stall caused by a VALU write to a SGPR and having the
following SALU wait for the SGPR.
An equivalent sequence is to save the exec mask manually instead of letting
s_and_saveexec do the work and use a v_cmpx instruction instead to do the
comparison.
This patch modifies the SIOptimizeExecMasking pass as this is the last position
where s_and_saveexec instructions are inserted. It does the transformation by
trying to find the pattern, extracting the operands and generating the new
instruction sequence.
It also changes some existing lit tests and introduces a few new tests to show
the changed behavior on GFX10.3 targets.
Reviewed By: sebastian-ne, critson
Differential Revision: https://reviews.llvm.org/D119696
Summary:
Specifically, for trap handling, for targets that do not support getDoorbellID,
we load the queue_ptr from the implicit kernarg, and move queue_ptr to s[0:1].
To get aperture bases when targets do not have aperture registers, we load
private_base or shared_base directly from the implicit kernarg. In clang, we use
implicitarg_ptr + offsets to implement __builtin_amdgcn_workgroup_size_{xyz}.
Reviewers: arsenm, sameerds, yaxunl
Differential Revision: https://reviews.llvm.org/D120265
When collecting trivially rematerializable defs, skip any subreg defs. We do not want to sink these.
Differential Revision: https://reviews.llvm.org/D121874
NFCI. The motivation for this is avoid problems in future if we add new
classes containing only a subset of all VGPRs, or a subset of all SGPRs.
getMinimalPhysRegClass would favour these smaller classes, which is not
what we want here.
Differential Revision: https://reviews.llvm.org/D121914
This change replaces the manual selection of buffer_atomic_cmpswap*
instructions in SelectionDAG and GlobalISel with a tblgen based
selection in BUFInstructions.td. This allows us to select the return and
no-return variants in tblgen.
Differential Revision: https://reviews.llvm.org/D121770
The fp32 packed math instructions are introduced in gfx90a.
If their vector register operands are not properly aligned, the
verifier should flag them. Currently, the verifier failed to
report it and the compiler ended up emitting a broken assembly.
This patch fixes that missed case in TII::verifyInstruction.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D121794
This is by analogy with HasFlatScratchSTMode and is slightly more
informative than using isGFX940Plus.
Differential Revision: https://reviews.llvm.org/D121804
NFC. Switch from calculations based on dwords to bits, to be more
flexible.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D121730
The original design of custom operands support assumed that most GPUs
have the same or very similar operand names end encodings. This is
no longer the case. As a result the support code becomes over-complicated
and difficult to maintain.
This change implements a different design with the following benefits:
- support of aliases;
- support of operands with overlapped encodings;
- identification of defined but unsupported operands.
Differential Revision: https://reviews.llvm.org/D121696
I met the issue here when working on something else.
Actually we have already reserved EXEC, but it looks
like the register coalescer is causing the sub-register
of EXEC appears in LiveIntervals. I have not looked
deeper why register coalscer have such behavior, but
removeAllRegUnitsForPhysReg() is the right way.
Reviewed By: critson, foad, arsenm
Differential Revision: https://reviews.llvm.org/D117014
The namespaces of HWREGs is now overlapping with gfx10. Thus the
patch is longer than necessary to just support new names. It also
need to handle proper error messages, i.e. to issue a "specified
hardware register is not supported on this GPU" message.
This may need a major refactoring in the future.
Differential Revision: https://reviews.llvm.org/D121418
This mainly changes the handling of bitcasts to not check the types
being casted from/to -- we should only care about the actual
load/store types. The GEP handling is also changed to not care about
types, and just make sure that we get an offset corresponding to
a vector element.
This was a bit of a struggle for me, because this code seems to be
pretty sensitive to small changes. The end result seems to produce
strictly better results for the existing test coverage though,
because we can now deal with more situations involving bitcasts.
Differential Revision: https://reviews.llvm.org/D121371
The HWEncoding for these 64 bit registers should be the same as as the
encoding for the previously defined low halves of the registers. So
reuse that value instead of repeating the assignment. NFC.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D121391
We have a pattern that undo sub x, c -> add x, -c canonicalization since c is more likely
an inline immediate than -c. This patch enables it to select scalar or vector subtracion by the input node divergence.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D121360
Summary:
In general, we need queue_ptr for aperture bases and trap handling,
and user SGPRs have to be set up to hold queue_ptr. In current implementation,
user SGPRs are set up unnecessarily for some cases. If the target has aperture
registers, queue_ptr is not needed to reference aperture bases. For trap
handling, if target suppots getDoorbellID, queue_ptr is also not necessary.
Futher, code object version 5 introduces new kernel ABI which passes queue_ptr
as an implicit kernel argument, so user SGPRs are no longer necessary for
queue_ptr. Based on the trap handling document:
https://llvm.org/docs/AMDGPUUsage.html#amdgpu-trap-handler-for-amdhsa-os-v4-onwards-table,
llvm.debugtrap does not need queue_ptr, we remove queue_ptr suport for llvm.debugtrap
in the backend.
Reviewers: sameerds, arsenm
Fixes: SWDEV-307189
Differential Revision: https://reviews.llvm.org/D119762
Flat can be merged with flat global since address cast is a no-op.
A combined memory operation needs to be promoted to flat.
Differential Revision: https://reviews.llvm.org/D120431
These compound predicates are not required, since we can use a
combination of setting the SubtargetPredicate (to a subtarget
predicate like isGFX940Plus) and OtherPredicates (to a list of feature
predicates like HasAtomicFaddInsts) instead. NFC.
Differential Revision: https://reviews.llvm.org/D121289
Add a new pass in the pre-ra AMDGPU scheduler to check if sinking trivially rematerializable defs that only has one use outside of the defining block will increase occupancy. If we can determine that occupancy can be increased, then rematerialize only the minimum amount of defs required to increase occupancy. Also re-schedule all regions that had occupancy matching the previous min occupancy using the new occupancy.
This is based off of the discussion in https://reviews.llvm.org/D117562.
The logic to determine the defs we should collect and determining if sinking would be beneficial is mostly the same. Main differences is that we are no longer limiting it to immediate defs and the def and use does not have to be part of a loop.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D119475
Currently the return address ABI registers s[30:31], which fall in the call
clobbered register range, are added as a live-in on the function entry to
preserve its value when we have calls so that it gets saved and restored
around the calls.
But the DWARF unwind information (CFI) needs to track where the return address
resides in a frame and the above approach makes it difficult to track the
return address when the CFI information is emitted during the frame lowering,
due to the involvment of understanding the control flow.
This patch moves the return address ABI registers s[30:31] into callee saved
registers range and stops adding live-in for return address registers, so that
the CFI machinery will know where the return address resides when CSR
save/restore happen during the frame lowering.
And doing the above poses an issue that now the return instruction uses undefined
register `sgpr30_sgpr31`. This is resolved by hiding the return address register
use by the return instruction through the `SI_RETURN` pseudo instruction, which
doesn't take any input operands, until the `SI_RETURN` pseudo gets lowered to the
`S_SETPC_B64_return` during the `expandPostRAPseudo()`.
As an added benefit, this patch simplifies overall return instruction handling.
Note: The AMDGPU CFI changes are there only in the downstream code and another
version of this patch will be posted for review for the downstream code.
Reviewed By: arsenm, ronlieb
Differential Revision: https://reviews.llvm.org/D114652
A load via pointer cast to constant will return true from
pointsToConstantMemory which is not necessarily so.
Fixes: SWDEV-326463
Differential Revision: https://reviews.llvm.org/D121172
Use TII::getRegClass to return a valid regclass or a nullptr
if the RC is unknown for a given OpIdx. This fixes a potential
crash occurred while getting the RC from a variadic instruction.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D120813
It is not necessary to wait for all outstanding memory operations before
barriers on hardware that can back off of the barrier in the event of an
exception when traps are enabled. Add a new subtarget feature which
tracks which HW has this ability.
Reviewed By: #amdgpu, rampitec
Differential Revision: https://reviews.llvm.org/D120544
Don't override SubtargetPredicate since that is already set in the
base classes for the appropriate subtarget like MIMG_gfx10. Use
OtherPredicates instead for consistency with the way we handle
features like HasImageInsts and HasExtendedImageInsts. NFC.
Differential Revision: https://reviews.llvm.org/D120909
SIInstrInfo::FoldImmediate tried to delete move-immediate instructions
after folding them into their only use. This did not work because it was
checking hasOneNonDBGUse after doing the fold, at which point there
should be no uses. This seems to have no effect on codegen, it just
means less stuff for DCE to clean up later.
Differential Revision: https://reviews.llvm.org/D120815
In convertToThreeAddress handle VOP2 mac/fmac instructions with a
literal src0 operand, since these are prime candidates for
converting to madmk/fmamk.
Previously this would only happen if src0 (or src1) was a register
defined by a move-immediate instruction, but in many cases these
operands have already been folded because SIFoldOperands runs
before TwoAddressInstructionPass.
Differential Revision: https://reviews.llvm.org/D120736
This wraps up from D119053. The 2 headers are moved as described,
fixed file headers and include guards, updated all files where the old
paths were detected (simple grep through the repo), and `clang-format`-ed it all.
Differential Revision: https://reviews.llvm.org/D119876
This change adds the selection of no-return buffer_* instructions in
tblgen. The motivation for this is to get the no-return atomic isel
working without relying on post-isel hooks so that GlobalISel can start
selecting them (once GlobalISelEmitter allows no return atomic patterns
like how DAGISel does).
This change handles the selection of no-return mubuf_atomic_cmpswap in
tblgen without changing the extract_subreg generation for the return
variant. This handling was done by the post-isel hook.
Differential Revision: https://reviews.llvm.org/D120538
Handle V_MAC_LEGACY_F32 and V_FMAC_LEGACY_F32 in
convertToThreeAddress, to avoid the need for an extra mov
instruction in some cases.
Differential Revision: https://reviews.llvm.org/D120704
Move MFMA handling to the top of convertToThreeAddress and pull
IsF16 calculation out of the switch. I think this makes it clearer
exactly which mac/fmac opcodes are handled, since they are now
listed in the switch with minimal extra clutter.
Differential Revision: https://reviews.llvm.org/D120703
Found by code inspection. I don't think it makes a difference with
current codegen, because if any source modifiers were present we
would have selected mad/fma instead of mac/fmac in the first place.
Differential Revision: https://reviews.llvm.org/D120709
This change fixes the code violations flagged in AMD compute CodeQL scan -
Query Description: "Comparisons between types of different widths in a loop condition can cause the loop to behave unexpectedly."
Differential Revision: https://reviews.llvm.org/D120355
Extend pre-emit peephole for S_CBRANCH_VCC[N]Z to eliminate
redundant S_AND operations against EXEC for V_CMP results in VCC.
These occur after after register allocation when VCC has been
selected as the comparison destination.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D120202
Loads and stores can be out of order in the SILoadStoreOptimizer.
When combining MachineMemOperands of two instructions operands are
sent in the IR order into the combineKnownAdjacentMMOs. At the
moment it picks the first operand and just replaces its offset and
size. This essentially loses alignment information and may generally
result in an incorrect base pointer to be used.
Use a base pointer in memory addresses order instead and only adjust
size.
Differential Revision: https://reviews.llvm.org/D120370
This adds handling of the _SADDR forms to the GLOBAL_LOAD combining.
TODO: merge global stores.
TODO: merge flat load/stores.
TODO: merge flat with global promoting to flat.
Differential Revision: https://reviews.llvm.org/D120285
There can be situations where global and flat loads and stores are not
combined by the vectorizer, in particular if their address space
differ in the IR but they end up the same class instructions after
selection. For example a divergent load from constant address space
ends up being the same global_load as a load from global address space.
TODO: merge global stores.
TODO: handle SADDR forms.
TODO: merge flat load/stores.
TODO: merge flat with global promoting to flat.
Differential Revision: https://reviews.llvm.org/D120279
Previously when combining two loads this pass would sink the
first one down to the second one, putting the combined load
where the second one was. It would also sink any intervening
instructions which depended on the first load down to just
after the combined load.
For example, if we started with this sequence of
instructions (code flowing from left to right):
X A B C D E F Y
After combining loads X and Y into XY we might end up with:
A B C D E F XY
But if B D and F depended on X, we would get:
A C E XY B D F
Now if the original code had some short disjoint live ranges
from A to B, C to D and E to F, in the transformed code
these live ranges will be long and overlapping. In this way
a single merge of two loads could cause an unbounded
increase in register pressure.
To fix this, change the way the way that loads are moved in
order to merge them so that:
- The second load is moved up to the first one. (But when
merging stores, we still move the first store down to the
second one.)
- Intervening instructions are never moved.
- Instead, if we find an intervening instruction that would
need to be moved, give up on the merge. But this case
should now be pretty rare because normal stores have no
outputs, and normal loads only have address register
inputs, but these will be identical for any pair of loads
that we try to merge.
As well as fixing the unbounded register pressure increase
problem, moving loads up and stores down seems like it
should usually be a win for memory latency reasons.
Differential Revision: https://reviews.llvm.org/D119006
Previously the name of the class (AMDGPUCFGStructurizer) did not
match the name of the file (AMDILCFGStructurizer).
Standardize on the name R600MachineCFGStructurizer by analogy with
AMDGPUMachineCFGStructurizer.
Differential Revision: https://reviews.llvm.org/D120128
Same as on vgpr copies, we cannot kill the source register if it
overlaps with the destination register. Otherwise, the kill of the
source register will also count as a kill for the destination register.
Differential Revision: https://reviews.llvm.org/D120042
Not clobbered pointer load chains are promoted to global now. That
is possible to promote these loads itself into constant address
space. Loaded pointers still need to point to global because we
need to be able to store into that pointer and because an actual
load from it may occur after a clobber.
Differential Revision: https://reviews.llvm.org/D119886
Just because there aren't AGPRs in the original program doesn't mean
the register allocator can't choose to use them (unless we were to
forcibly reserve all AGPRs if there weren't any uses). This happens in
high pressure situations and introduces copies to avoid spills.
In this test, the allocator ends up introducing a copy from SGPR to
AGPR which requires an intermediate VGPR. I don't believe it would
introduce a copy from AGPR to AGPR in this situation, since it would
be trying to use an intermediate with a different class.
Theoretically this is also broken on gfx90a, but I have been unable to
come up with a testcase.
gfx90a allows the number of ACC registers (AGPRs) to be set
independently to the VGPR registers. For both HSA and PAL metadata, we
now include an "agpr_count" key to report the number of AGPRs set for
supported devices (gfx90a, gfx908, as determined by hasMAIInsts()).
This is collected from SIProgramInfo.NumAccVGPR for both HSA and PAL.
The AsmParser also now recognizes ".kernel.agpr_count" for supported
devices.
Differential Revision: https://reviews.llvm.org/D116140
Enabled HW_REG_HW_ID as an alias for HW_REG_HW_ID1. This is required for compatibility with existing code.
Differential Revision: https://reviews.llvm.org/D119939
Autogenerated names are too long and break compilation on Windows,
while we do not need this enum at all.
Differential Revision: https://reviews.llvm.org/D119869
Separate MCRegisterInfo::regsOverlap out from
TargetRegisterInfo::regsOverlap. This is useful in the AMDGPU AsmParser
where we only have access to MCRegisterInfo.
Differential Revision: https://reviews.llvm.org/D119533
An enum value stores the offset between AGPR ranges and VGPR
ranges in the internal storage of SIInsertWaitcnts. It said 226 when
it should say 256, causing some portion of the ranges to overlap. That
in turn causes 'aliasing' between the registers, potentially inserting
waitcnts that are not required.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D119749
Use a subtarget feature instead of a command line argument to reduce
global state.
We want to enable flat scratch for graphics in some cases and this
doesn't work well with command line options.
Differential Revision: https://reviews.llvm.org/D119425
The module flag to indicate use of hostcall is insufficient to catch
all cases where hostcall might be in use by a kernel. This is now
replaced by a function attribute that gets propagated to top-level
kernel functions via their respective call-graph.
If the attribute "amdgpu-no-hostcall-ptr" is absent on a kernel, the
default behaviour is to emit kernel metadata indicating that the
kernel uses the hostcall buffer pointer passed as an implicit
argument.
The attribute may be placed explicitly by the user, or inferred by the
AMDGPU attributor by examining the call-graph. The attribute is
inferred only if the function is not being sanitized, and the
implictarg_ptr does not result in a load of any byte in the hostcall
pointer argument.
Reviewed By: jdoerfert, arsenm, kpyzhov
Differential Revision: https://reviews.llvm.org/D119216
Add a new llvm.fptrunc.round intrinsic to precisely control
the rounding mode when converting from f32 to f16.
Differential Revision: https://reviews.llvm.org/D110579
Newly created fneg was built after some of it's uses in some cases.
Now it will be built immediately after instruction whose dst it negates.
Differential Revision: https://reviews.llvm.org/D119459
As usual with that header cleanup series, some implicit dependencies now need to
be explicit:
llvm/MC/MCParser/MCAsmParser.h no longer includes llvm/MC/MCParser/MCAsmLexer.h
Preprocessed lines to build llvm on my setup:
after: 1068185081
before: 1068324320
So no compile time benefit to expect, but we still get the looser coupling
between files which is great.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119359
Use same MSSA clobbering checks as in the AMDGPUAnnotateUniformValues.
Kernel argument promotion needs exactly the same information so factor
out utility function isClobberedInFunction.
Differential Revision: https://reviews.llvm.org/D119480
This is guaranteed to be evaluated so we can avoid repeated calls.
Helps the static analyzer as it couldn't recognise that each getVecSize() would return the same value.
This is just a reminder that the operands are swapped compared with all
the other CmpXChg instructions.
Differential Revision: https://reviews.llvm.org/D119421
This change adds the selection for the no-return global_* and flat_*
instructions in tblgen. The motivation for this is to get the no-return atomic
isel working without relying on post-isel hooks so that GlobalISel can start
selecting them (once GlobalISelEmitter allows no return atomic patterns like
how DAGISel does).
Differential Revision: https://reviews.llvm.org/D119227
SelectionDAG relies on MachineInstr's HasPostISelHook for selecting the
no-return atomic ops. GlobalISel, at the moment, doesn't handle
HasPostISelHook.
This change adds the selection for no-return ds_* atomic ops in tblgen
so that it can work with both GlobalISel and SelectionDAG. I couldn't
add the predicates for GlobalISel in this change since there's a
restriction in GlobalISelEmitter that disallows selecting generic
atomics ops that return with instructions that doesn't return.
We can't remove the HasPostISelHook code that selects the no return
atomic ops in SelectionDAG yet since we still need to cover selections
in FLATInstructions.td, BUFInstructions.td.
Differential Revision: https://reviews.llvm.org/D115881
There's a few relevant forward declarations in there that may require downstream
adding explicit includes:
llvm/MC/MCContext.h no longer includes llvm/BinaryFormat/ELF.h, llvm/MC/MCSubtargetInfo.h, llvm/MC/MCTargetOptions.h
llvm/MC/MCObjectStreamer.h no longer include llvm/MC/MCAssembler.h
llvm/MC/MCAssembler.h no longer includes llvm/MC/MCFixup.h, llvm/MC/MCFragment.h
Counting preprocessed lines required to rebuild llvm-project on my setup:
before: 1052436830
after: 1049293745
Which is significant and backs up the change in addition to the usual benefits of
decreasing coupling between headers and compilation units.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119244
We can select _vgprcd versions of MAI instructions and have no
AGPRs with the whole budget left for VGPRs if:
1. This is a kernel;
2. It has no calls;
3. It runs at least on 2 waves thus having not more that 256 VGPRs.
4. There is no inline asm requesting AGPRs.
Differential Revision: https://reviews.llvm.org/D117253
Previously would reuse the VGPR used for large frame offsets with the
one needed for copying from the AGPR. Fix this by reusing the register
we already reserved for handling AGPR to AGPR copies.
Joe Nash