Using the legacy PM for the optimization pipeline is deprecated and in
the process of being removed. This is a small step in that direction.
For an example of migrating to the new PM:
853b57fe80
We're seeing non-determinism with loading sample profiles. It seems to
be related to the order in which we merge FunctionSamples in
promoteMergeNotInlinedContextSamples(). Use a MapVector to iterate over
NonInlinedCallSites in the order entries were inserted.
Reviewed By: wenlei, davidxl
Differential Revision: https://reviews.llvm.org/D131592
The relevant property of allocation functions of interest here is
their uniqueness (in the sense of disjoint provenance), which is
encoded by the noalias return attribute.
Differential Revision: https://reviews.llvm.org/D130225
This fixes 69 llvm tests that failed when EXPENSIVE_CHECKS was enabled.
llvm/test/Transforms/IROutliner/outlining-commutative-operands-opposite-order.ll
is one example.
When we have EXPENSIVE_CHECKS, _GLIBCXX_DEBUG is defined. This means
that libstdc++ will call the compare function to check if it is
implemented correctly (that !(a < a) is true).
This happens even if there is only one item and here, we expect
to see one return void or multiple return constant integer.
Don't sort if we have 1 item, but do assert that it is the 1
ret void we expect. In the comparator, assert that neither
Value is a nullptr in case one ended up in a the list somehow.
Reviewed By: AndrewLitteken
Differential Revision: https://reviews.llvm.org/D130230
In contrast to AAPotentialValues, the constant values version can
contain implicit `undef` in the set. We had an assertion that could
misfire before. Handle it properly now.
In this patch we replace common code patterns with the use of utility
functions for dealing with profiling metadata. There should be no change
in functionality, as the existing checks should be preserved in all
cases.
Reviewed By: bogner, davidxl
Differential Revision: https://reviews.llvm.org/D128860
This patch introduces the inline cost priority into the
module inliner, which uses the same computation as
InlineCost.
Reviewed By: kazu
Differential Revision: https://reviews.llvm.org/D130012
This patch introduces the inline cost priority into the
module inliner, which uses the same computation as
InlineCost.
Reviewed By: kazu
Differential Revision: https://reviews.llvm.org/D130012
In this patch we replace common code patterns with the use of utility
functions for dealing with profiling metadata. There should be no change
in functionality, as the existing checks should be preserved in all
cases.
Reviewed By: bogner, davidxl
Differential Revision: https://reviews.llvm.org/D128860
The behaviour of this patch is not great, but it has some side-effects
that are required for OpenMPOpt to work. The problem is that when we use
`-mlink-builtin-bitcode` we only import used symbols from the runtime.
Then OpenMPOpt will insert calls to symbols that were not previously
included. This patch removed this implicit behaviour as these functions
were kept alive by the `noinline` simply because it kept calls to them
in the module. This caused regression in some tests that relied on some
OpenMPOpt passes without using LTO. Reverting for the LLVM15 release but
will try to fix it more correctly on main.
This reverts commit d61d72dae6.
Fixes#56752
Turning on opaque pointers has uncovered an issue with WPD where we currently pattern match away `assume(type.test)` in WPD so that a later LTT doesn't resolve the type test to undef and introduce an `assume(false)`. The pattern matching can fail in cases where we transform two `assume(type.test)`s into `assume(phi(type.test.1, type.test.2))`.
Currently we create `assume(type.test)` for all virtual calls that might be devirtualized. This is to support `-Wl,--lto-whole-program-visibility`.
To prevent this, all virtual calls that may not be in the same LTO module instead use a new `llvm.public.type.test` intrinsic in place of the `llvm.type.test`. Then when we know if `-Wl,--lto-whole-program-visibility` is passed or not, we can either replace all `llvm.public.type.test` with `llvm.type.test`, or replace all `llvm.public.type.test` with `true`. This prevents WPD from trying to pattern match away `assume(type.test)` for public virtual calls when failing the pattern matching will result in miscompiles.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D128955
We previously used the `noinline` attributes to specify some defintions
which should be kept alive in the runtime. These were then stripped
immediately in the OpenMPOpt module pass. However, Since the changes in
D130298, we not explicitly state which functions will have external
visiblity in the bitcode library. Additionally the OpenMPOpt module pass
should run before the inliner pass, so this shouldn't make a difference
in whether or not the functions will be alive for the initial pass of
OpenMPOpt. This should simplify the interface, and additionally save
time spend on scanning funciton names for noinline.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D130368
If we look at a write, we should not enact the "has been written to"
logic introduced to avoid spurious write -> read dependences. Doing so
lead to elimination of stores we needed, which is obviously bad.
The name `getEntrySamples` was misleading for 2 reasons. One, it's
close in name to `Function::getEntryCount`, but the equivalent here is
`getHeadSamples`; second, as opposed to the other get* APIs in
`FunctionSamples`, it performs an estimate/heuristic rather than just
retrieving raw data (or a non-heuristic derivate off that data, like
`getMaxCountInside`)
The new name should more clearly communicate its intent; and, being
close (in name) to `getHeadSamples`, it should allow the reader discover
the relation between them.
Also updated the doc comments for both `getHeadSamples[Estimate]` so a
reader may better understand the relation between them.
Differential Revision: https://reviews.llvm.org/D130281
The internalize pass supports an option to provide a list of symbols
that should not be internalized. THis is useful retaining certain
defintions that should be kept alive. However, this interface is
somewhat difficult to use as it requires knowing every single symbol's
name and specifying it. Many APIs provide common prefixes for the
symbols exported by the library, so it would make sense to be able to
match these using a simple glob pattern. This patch changes the handling
from a simple string comparison to a glob pattern match.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D130319
If a function is non-recursive we only performed intra-procedural
reasoning for reachability (via AA::isPotentiallyReachable). However,
if it is re-entrant that doesn't mean we can't reach. Instead of this
problematic logic in the reachability reasoning we utilize logic in
AAPointerInfo. If a location is for sure written by a function it can
be re-entrant or recursive we know only intra-procedural reasoning is
sufficient.
If we have a dominating must-write access we do not need to know the
initial value of some object to perform reasoning about the potential
values. The dominating must-write has overwritten the initial value.
We currently assume in a number of places that free-like functions
free their first argument. This is true for all hardcoded free-like
functions, but with the new attribute-based design, the freed
argument is supposed to be indicated by the allocptr attribute.
To make sure we handle this correctly once allockind(free) is
respected, add a getFreedOperand() helper which returns the freed
argument, rather than just indicating whether the call frees *some*
argument.
This migrates most but not all users of isFreeCall() to the new
API. The remaining users are a bit more tricky.
We were quite conservative when it came to PHI node handling to avoid
recursive reasoning. Now we check more direct if we have seen a PHI
already or not. This allows non-recursive PHI chains to be handled.
This also exposed a bug as we did only model the effect of one loop
traversal. `phi_no_store_3` has been adapted to show how we would have
used `undef` instead of `1` before. With this patch we don't replace
it at all, which is expected as we do not argue about loop iterations
(or alignments).
If we only have exact accesses we should never require the bit-pattern
to be uniform (in this case 0). Only a non-exact access should force us
to require only 0 values.
For the longest time we used `AAValueSimplify` and
`genericValueTraversal` to determine "potential values". This was
problematic for many reasons:
- We recomputed the result a lot as there was no caching for the 9
locations calling `genericValueTraversal`.
- We added the idea of "intra" vs. "inter" procedural simplification
only as an afterthought. `genericValueTraversal` did offer an option
but `AAValueSimplify` did not. Thus, we might end up with "too much"
simplification in certain situations and then gave up on it.
- Because `genericValueTraversal` was not a real `AA` we ended up with
problems like the infinite recursion bug (#54981) as well as code
duplication.
This patch introduces `AAPotentialValues` and replaces the
`AAValueSimplify` uses with it. `genericValueTraversal` is folded into
`AAPotentialValues` as are the instruction simplifications performed in
`AAValueSimplify` before. We further distinguish "intra" and "inter"
procedural simplification now.
`AAValueSimplify` was not deleted as we haven't ported the
re-materialization of instructions yet. There are other differences over
the former handling, e.g., we may not fold trivially foldable
instructions right now, e.g., `add i32 1, 1` is not folded to `i32 2`
but if an operand would be simplified to `i32 1` we would fold it still.
We are also even more aware of function/SCC boundaries in CGSCC passes,
which is good even if some tests look like they regress.
Fixes: https://github.com/llvm/llvm-project/issues/54981
Note: A previous version was flawed and consequently reverted in
6555558a80.
Arthur Eubanks