These are opsel opcodes with op_sel actually being ignored.
As a such op_sel_hi needs to be set to default 1 even though
these bits are ignored. This is compatibility change.
Differential Revision: https://reviews.llvm.org/D91202
By setting up the AsmStrings correctly we can remove some special cases
from AMDGPUInstPrinter::printOffset.
Differential Revision: https://reviews.llvm.org/D90307
GFX10 enables third addressing mode for flat scratch instructions,
an ST mode. In that mode both register operands are omitted and
only swizzled offset is used in addition to flat_scratch base.
Differential Revision: https://reviews.llvm.org/D89501
This instruction was introduced in GFX10.3, reusing the opcode of
v_mac_legacy_f32 from GFX10.1.
Differential Revision: https://reviews.llvm.org/D89247
The VGPR component is a 32-bit offset, not 64-bits.
I'm not sure what the correct syntax is for this. This maintains the
vaddr position and leaves saddr in the end "off" position. This is
particularly terrible for stores, since the operand order is now <vgpr
offset>, <data>, <sgpr base>, splitting the pointer operands. I
suppose this is a logical consequence from the mistake of not putting
the data operand first. I'm not sure what sp3 does.
Currently supported LLVM MTBUF syntax is shown below. It is not compatible with SP3.
op dst, addr, rsrc, FORMAT, soffset
This change adds support for SP3 syntax:
op dst, addr, rsrc, soffset SP3FORMAT
In addition to being compatible with SP3, this syntax allows using symbolic names for data, numeric and unified formats. Below is a list of added syntax variants.
format:<expression>
format:[<numeric-format-name>,<data-format-name>]
format:[<data-format-name>,<numeric-format-name>]
format:[<data-format-name>]
format:[<numeric-format-name>]
format:[<unified-format-name>]
The last syntax variant is supported for GFX10 only.
See llvm bug 37738
Reviewers: arsenm, rampitec, vpykhtin
Differential Revision: https://reviews.llvm.org/D84026
16-bit literals are encoded as 32-bit values. If high 16-bits of the value is 0xFFFF, the decoded instruction cannot be reassembled.
For example, the following code
0xff,0x04,0x04,0x52,0xcd,0xab,0xff,0xff
was decoded as
v_mul_lo_u16_e32 v2, 0xffffabcd, v2
However this literal is actually a 64-bit constant 0x00000000ffffabcd which violates requirements described in the documentation - the truncation is not safe.
This change corrects decoding to make reassembly possible.
Reviewers: arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D84098
MTBUF implementation has many issues and this change addresses most of these:
- refactored duplicated code;
- hardcoded constants moved out of high-level code;
- fixed a decoding error when nfmt or dfmt are zero (bug 36932);
- corrected parsing of operand separators (bug 46403);
- corrected handling of missing operands (bug 46404);
- corrected handling of out-of-range modifiers (bug 46421);
- corrected default value (bug 46467).
Reviewers: arsenm, rampitec, vpykhtin, artem.tamazov, kzhuravl
Differential Revision: https://reviews.llvm.org/D83760
It seems to be a hardware defect that the half inline constants do not
work as expected for the 16-bit integer operations (the inverse does
work correctly). Experimentation seems to show these are really
reading the 32-bit inline constants, which can be observed by writing
inline asm using op_sel to see what's in the high half of the
constant. Theoretically we could fold the high halves of the 32-bit
constants using op_sel.
The *_asm_all.s MC tests are broken, and I don't know where the script
to autogenerate these are. I started manually fixing it, but there's
just too many cases to fix. This also does break the
assembler/disassembler support for these values, and I'm not sure what
to do about it. These are still valid encodings, so it seems like you
should be able to use them in some way. If you wrote assembly using
them, you could have really meant it (perhaps to read the high bits
with op_sel?). The disassembler will print the invalid literal
constant which will fail to re-assemble. The behavior is also
different depending on the use context. Consider this example, which
was previously accepted and encoded using the inline constant:
v_mad_i16 v5, v1, -4.0, v3
; encoding: [0x05,0x00,0xec,0xd1,0x01,0xef,0x0d,0x04]
In contexts where an inline immediate is required (such as on gfx8/9),
this will now be rejected. For gfx10, this will produce the literal
encoding and change the printed format:
v_mad_i16 v5, v1, 0xc400, v3
; encoding: [0x05,0x00,0x5e,0xd7,0x01,0xff,0x0d,0x04,0x00,0xc4,0x00,0x00]
This is just another variation of the issue that we don't perfectly
handle round trip assembly/disassembly due to not tracking how
immediates were encoded. This doesn't matter much in practice, since
compilers don't emit the suboptimal encoding. I doubt any users are
relying on this behavior (although I did make use of the old behavior
to figure out what was wrong).
Fixes bug 46302.
This reverts commit 80a34ae311 with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
Summary:
This adds assembler tests for cases that were previously only in the
disassembler tests, and vice versa.
Reviewers: rampitec, arsenm, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72592
Summary:
This adds assembler tests for cases that were previously only in the
disassembler tests, and vice versa.
Reviewers: rampitec, arsenm, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72561
addOperand() method of AMDGPU disassembler returns SoftFail
on error. All instances which may lead to that place are
an impossible encdoing, not something which is possible to
encode, but semantically incorrect as described for SoftFail.
Then tablegen generates a check of the following form:
if (Decode...(..) == MCDisassembler::Fail) { return MCDisassembler::Fail; }
Since we can only return Success and SoftFail that is dead
code as detected by the static code analyzer.
Solution: return Fail as it should be.
See https://bugs.llvm.org/show_bug.cgi?id=43886
Differential Revision: https://reviews.llvm.org/D69819
Summary:
The LLVM disassembler assumes that the unused src0 operand of v_nop is
zero. Other tools can put another value in that field, which is still
valid. This commit fixes the LLVM disassembler to recognize such an
encoding as v_nop, in the same way as we already do for s_getpc.
Differential Revision: https://reviews.llvm.org/D63724
Change-Id: Iaf0363eae26ff92fc4ebc716216476adbff37a6f
llvm-svn: 364208
Allow the clamp modifier on vop3 int arithmetic instructions in assembly
and disassembly.
This involved adding a clamp operand to the affected instructions in MIR
and MC, and thus having to fix up several places in codegen and MIR
tests.
Differential Revision: https://reviews.llvm.org/D59267
Change-Id: Ic7775105f02a985b668fa658a0cd7837846a534e
llvm-svn: 356399
This commit allows v_cndmask_b32_e64 with abs, neg source
modifiers on src0, src1 to be assembled and disassembled.
This does appear to be allowed, even though they are floating point
modifiers and the operand type is b32.
To do this, I added src0_modifiers and src1_modifiers to the
MachineInstr, which involved fixing up several places in codegen and mir
tests.
Differential Revision: https://reviews.llvm.org/D59191
Change-Id: I69bf4a8c73ebc65744f6110bb8fc4e937d79fbea
llvm-svn: 356398
Stores failed to decode at all since they didn't have a
DecoderNamespace set. Loads worked, but did not change
the register width displayed to match the numbmer of
enabled channels.
The number of printed registers for vaddr is still wrong,
but I don't think that's encoded in the instruction so
there's not much we can do about that.
Image atomics are still broken. MIMG is the same
encoding for SI/VI, but the image atomic classes
are split up into encoding specific versions unlike
every other MIMG instruction. They have isAsmParserOnly
set on them for some reason. dmask is also special for
these, so we probably should not have it as an explicit
operand as it is now.
llvm-svn: 320614
Intrinsic already existed for llvm.SI.tbuffer.store
Needed tbuffer.load and also re-implementing the intrinsic as llvm.amdgcn.tbuffer.*
Added CodeGen tests for the 2 new variants added.
Left the original llvm.SI.tbuffer.store implementation to avoid issues with existing code
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye, tpr
Differential Revision: https://reviews.llvm.org/D30687
llvm-svn: 306031
A new Gfx9 dasm test added with approx 29000 cases.
Existing tests extended by (approx.):
* Gfx7 asm: 5000 test cases
* Gfx8 asm: 5000 test cases
* Gfx9 asm: 14400 test cases
* Gfx8 dasm: 5200 test cases
llvm-svn: 305702
We don't use it and it was removed in gfx9, and the encoding
bit repurposed.
Additionally actually using it requires changing the output register
class, which wasn't done anyway.
llvm-svn: 302814
The unused dummy src2_modifiers is missing, so it crashes
when trying to print it.
I tried to fully remove src2_modifiers, but there are some
irritations in the places where it is converted to mad since
it starts to require modifying use lists while iterating over
them.
llvm-svn: 299861
- corrected DS_GWS_* opcodes (see VI_Shader_Programming#16.pdf for detailed description)
- address operand is not used
- several opcodes have data operand
- all opcodes have offset modifier
- DS_AND_SRC2_B32: corrected typo in mnemo
- DS_WRAP_RTN_F32 replaced with DS_WRAP_RTN_B32
- added CI/VI opcodes:
- DS_CONDXCHG32_RTN_B64
- DS_GWS_SEMA_RELEASE_ALL
- added VI opcodes:
- DS_CONSUME
- DS_APPEND
- DS_ORDERED_COUNT
Differential Revision: https://reviews.llvm.org/D31707
llvm-svn: 299767
Stanislav Mekhanoshin