Add support for the 'pause' hint instruction as an alias for
'fence w, 0'. To do this allow the 'fence' operands pred and succ
to be set to 0 (the empty set). This will also allow future hints
to be encoded as 'fence 0, <x>' and 'fence <x>, 0'.
This patch revised from @mundaym's D93019.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D117789
The following SubtargetFeatures are removed from the definition of
HasV8_0rOps, on the grounds that they are optional in Armv8.4-A, and
therefore (by the definition of Armv8.0-R) also optional in v8.0-R:
* performance monitoring: FeaturePerfMon
* cryptography: FeatureSM4 and FeatureSHA3
* half-precision FP: FeatureFullFP16, FeatureFP16FML
* speculation control: FeatureSSBS, FeaturePredRes, FeatureSB,
FeatureSpecRestrict
This isn't the full set of features that are listed as optional in the
spec. FeatureCCIDX and FeatureTRACEV8_4 are also optional. But LLVM
includes those in HasV8_3aOps and HasV8_4aOps respectively (I think on
the grounds that the system registers they enable are useful to be
able to access after a runtime check), and so for consistency, I've
left those in HasV8_0rOps too.
After this commit, HasV8_0rOps is a strict subset of HasV8_4aOps (but
missing features that are not in Armv8.0-R at all).
The definition of Cortex-R82 is correspondingly updated to add most of
the features that I've removed from base Armv8.0-R (with the exception
of the cryptography ones), since that particular implementation of
v8.0-R does have them.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D118045
The Armv8-R.64 architecture defines numbered MPU region registers with
indices 1-15, not 0-15. So there's no such register as PRBAR0_EL2 or
PRLAR0_EL1 (for example). The encodings that they would occupy are
used for the unnumbered PRBAR_ELn and PRLAR_ELn registers.
Reviewed By: labrinea
Differential Revision: https://reviews.llvm.org/D117755
This family of instructions includes CPYF (copy forward), CPYB (copy
backward), SET (memset) and SETG (memset + initialise MTE tags), with
some sub-variants to indicate whether address translation is done in a
privileged or unprivileged way. For the copy instructions, you can
separately specify the read and write translations (so that kernels
can safely use these instructions in syscall handlers, to memcpy
between the calling process's user-space memory map and the kernel's
own privileged one).
The unusual thing about these instructions is that they write back to
multiple registers, because they perform an implementation-defined
amount of copying each time they run, and write back to _all_ the
address and size registers to indicate how much remains to be done
(and the code is expected to loop on them until the size register
becomes zero). But this is no problem in LLVM - you just define each
instruction to have multiple outputs, multiple inputs, and a set of
constraints tying their register numbers together appropriately.
This commit introduces a special subtarget feature called MOPS (after
the name the spec gives to the CPU id field), which is a dependency of
the top-level 8.8-A feature, and uses that to enable most of the new
instructions. The SETMG instructions also depend on MTE (and the test
checks that).
Differential Revision: https://reviews.llvm.org/D116157
This patch implements PAC return address signing for armv8-m. This patch roughly
accomplishes the following things:
- PAC and AUT instructions are generated.
- They're part of the stack frame setup, so that shrink-wrapping can move them
inwards to cover only part of a function
- The auth code generated by PAC is saved across subroutine calls so that AUT
can find it again to check
- PAC is emitted before stacking registers (so that the SP it signs is the one
on function entry).
- The new pseudo-register ra_auth_code is mentioned in the DWARF frame data
- With CMSE also in use: PAC is emitted before stacking FPCXTNS, and AUT
validates the corresponding value of SP
- Emit correct unwind information when PAC is replaced by PACBTI
- Handle tail calls correctly
Some notes:
We make the assembler accept the `.save {ra_auth_code}` directive that is
emitted by the compiler when it saves a register that contains a
return address authentication code.
For EHABI we need to have the `FrameSetup` flag on the instruction and
handle the `t2PACBTI` opcode (identically to `t2PAC`), so we can emit
`.save {ra_auth_code}`, instead of `.save {r12}`.
For PACBTI-M, the instruction which computes return address PAC should use SP
value before adjustment for the argument registers save are (used for variadic
functions and when a parameter is is split between stack and register), but at
the same it should be after the instruction that saves FPCXT when compiling a
CMSE entry function.
This patch moves the varargs SP adjustment after the FPCXT save (they are never
enabled at the same time), so in a following patch handling of the `PAC`
instruction can be placed between them.
Epilogue emission code adjusted in a similar manner.
PACBTI-M code generation should not emit any instructions for architectures
v6-m, v8-m.base, and for A- and R-class cores. Diagnostic message for such cases
is handled separately by a future ticket.
note on tail calls:
If the called function has four arguments that occupy registers `r0`-`r3`, the
only option for holding the function pointer itself is `r12`, but this register
is used to keep the PAC during function/prologue epilogue and clobbers the
function pointer.
When we do the tail call we need the five registers (`r0`-`r3` and `r12`) to
keep six values - the four function arguments, the function pointer and the PAC,
which is obviously impossible.
One option would be to authenticate the return address before all callee-saved
registers are restored, so we have a scratch register to temporarily keep the
value of `r12`. The issue with this approach is that it violates a fundamental
invariant that PAC is computed using CFA as a modifier. It would also mean using
separate instructions to pop `lr` and the rest of the callee-saved registers,
which would offset the advantages of doing a tail call.
Instead, this patch disables indirect tail calls when the called function take
four or more arguments and the return address sign and authentication is enabled
for the caller function, conservatively assuming the caller function would spill
LR.
This patch is part of a series that adds support for the PACBTI-M extension of
the Armv8.1-M architecture, as detailed here:
https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/armv8-1-m-pointer-authentication-and-branch-target-identification-extension
The PACBTI-M specification can be found in the Armv8-M Architecture Reference
Manual:
https://developer.arm.com/documentation/ddi0553/latest
The following people contributed to this patch:
- Momchil Velikov
- Ties Stuij
Reviewed By: danielkiss
Differential Revision: https://reviews.llvm.org/D112429
This change introduces subtarget features to predicate certain
instructions and system registers that are available only on
'A' profile targets. Those features are not present when
targeting a generic CPU, which is the default processor.
In other words the generic CPU now means the intersection of
'A' and 'R' profiles. To maintain backwards compatibility we
enable the features that correspond to -march=armv8-a when the
architecture is not explicitly specified on the command line.
References: https://developer.arm.com/documentation/ddi0600/latest
Differential Revision: https://reviews.llvm.org/D110065
These instructions should allow src0 to be a literal with the same
value as the mandatory other literal. Enable it by introducing an
operand that defers adding its value to the MI when decoding till
the mandatory literal is parsed.
Reviewed By: dp, foad
Differential Revision: https://reviews.llvm.org/D111067
Change-Id: I22b0ae0d35bad17b6f976808e48bffe9a6af70b7
FeaturePMU was created in AArch64 to accommodate one missing system
register, PMMIR_EL1, in commit ffcd7698ae.
However, the Performance Monitors extension already had a target
feature, which is called FeaturePerfMon. Therefore, FeaturePMU is
redundant.
This patch removes FeaturePMU and merges its contents into
FeaturePerfMon.
Reviewed By: dnsampaio
Differential Revision: https://reviews.llvm.org/D109246
Suffix opcodes with _gfx10.
Remove direct references to architecture specific opcodes.
Add a BVH flag and apply this to diassembly.
Fix a number of disassembly errors on gfx90a target caused by
previous incorrect BVH detection code.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D108117
This enables printing of the mnemonics that contain the predicate
in the Intel printer. This requires accounting for the memory size
that is explicitly printed in Intel syntax. Those changes have been
synced to the ATT printer as well.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D108093
Add disassembler support for the NORM and NORMH instructions. These instructions
only exist when the ARC processor is configured with the "norm" extension.
fferential Revision: https://reviews.llvm.org/D107118
Add td definitions and asm/disasm tests for the addex instruction introduced in
ISA 3.0.
Reviewed By: nemanjai, amyk, NeHuang
Differential Revision: https://reviews.llvm.org/D106666
This patch adds support for the next-generation arch14
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Detection of arch14 as host processor.
- Assembler/disassembler support for new instructions.
- New LLVM intrinsics for certain new instructions.
- Support for low-level builtins mapped to new LLVM intrinsics.
- New high-level intrinsics in vecintrin.h.
- Indicate support by defining __VEC__ == 10304.
Note: No currently available Z system supports the arch14
architecture. Once new systems become available, the
official system name will be added as supported -march name.
Allow MIMG instructions to be selected with 6/7 VGPRs for vaddr.
Previously these were rounded up to VReg_256 this saves VGPRs.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103800
This adds support for Armv9-A's Realm Management Extension, including
three new system registers - MFAR_EL3, GPCCR_EL3 and GPTBR_EL3 - and
four new TLBI instructions.
The reference for the Realm Management Extension can be found at: https://developer.arm.com/documentation/ddi0615/aa.
Based on patches by Victor Campos.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D104773
Export `lq`, `stq`, `lqarx` and `stqcx.` in preparation for implementing 16-byte lock free atomic operations on AIX.
Add a new register class `g8prc` for these instructions, since these instructions require even-odd register pair.
Reviewed By: nemanjai, jsji, #powerpc
Differential Revision: https://reviews.llvm.org/D103010
Avoid having to round up to v8f32/VReg_256 when only 5 VGPRs are
required for a MIMG address operand.
Maintain _V8 instruction variants of pseudo instructions allowing
assembly prior to GFX10 to work as-is. Currently the validator
can tell for GFX10 what the correct size is, so will disallow
oversize address registers.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D103672
This looks like a mistake when the tests were committed in r363946.
There were two sets of tests for the f32 variant of these instructions,
instead of one set for f16 and one set for f32.
Differential Revision: https://reviews.llvm.org/D103699
The Arm Architecture Reference Manual says that the SystemHintOp_BTI
opcode is prefered when CRm:op2 matches 0100:xx0, but llvm-mc
currently accepts 0100:xxx, which isn't right.
Differential Revision: https://reviews.llvm.org/D102415
A16 support for image instructions assembly/disassembly (gfx10) was missing
Also refactor MIMG op addr size calcs to common function
We'd got 3 places where the same operation was being done.
One test is now marked XFAIL until a related codegen patch is in place
Differential Revision: https://reviews.llvm.org/D102231
Change-Id: I7e86e730ef8c71901457855cba570581f4f576bb
Try to fix bug 49974.
This patch fixes two issues:
1. BL does not use predicate (BL_pred is the predicate version of BL),
so we shouldn't add predicate operands in DecodeBranchImmInstruction.
2. Inside DecodeT2AddSubSPImm, we shouldn't add predicate operands into
the MCInst because ARMDisassembler::AddThumbPredicate will do that for us.
However, we should handle CC-out operand for t2SUBspImm and t2AddspImm.
Differential Revision: https://reviews.llvm.org/D100585
There are four new PowerPC instructions that are introduced in
Power 10. They are hashst, hashchk, hashstp, hashchkp.
These instructions will be used for ROP Protection.
This patch adds the four instructions.
Reviewed By: nemanjai, amyk, #powerpc
Differential Revision: https://reviews.llvm.org/D99375
In the final SIMD spec, there is only a single v128.any_true instruction, rather
than one for each lane interpretation because the semantics do not depend on the
lane interpretation.
Differential Revision: https://reviews.llvm.org/D100241
There are four new PowerPC instructions that are introduced in
Power 10. They are hashst, hashchk, hashstp, hashchkp.
These instructions will be used for ROP Protection.
This patch adds the four instructions.
Reviewed By: nemanjai, amyk, #powerpc
Differential Revision: https://reviews.llvm.org/D99375
Copy-paste P9 insns were added back in 2016,
however, looks like the opcodes has changed in ISA3.1.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D97416
Update the list of s_sendmsg messages known to the assembler and
disassembler and validate the ones that were added or removed in gfx9
and gfx10.
Differential Revision: https://reviews.llvm.org/D97295
Enabled "bound_ctrl:1" and disabled "bound_ctrl:-1" syntax.
Corrected printer to output "bound_ctrl:1" instead of "bound_ctrl:0".
See bug 35397 for detailed issue description.
Differential Revision: https://reviews.llvm.org/D97048
These two instructions are VOP3P and have op_sel_hi bits,
however do not use op_sel_hi. That is recommended to set
unused op_sel_hi bits to 1. However, we cannot decode
both representations with 1 and 0 if bits are set to
default value 1. If bits are set to be ignored with '?'
initializer then encoding defaults them to 0.
The patch is a hack to force ignored '?' bits to 1 on
encoding for these instructions.
There is still canonicalization happens on disasm print
if incoming values are non-default, so that disasm output
does not match binary input, but this is pre-existing
problem for all instructions with '?' bits.
Fixes: SWDEV-272540
Differential Revision: https://reviews.llvm.org/D96543
Add mimgopc object to represent the opcode allowing different
opcodes for different hardware variants.
This enables image_atomic_fcmpswap, image_atomic_fmin, and
image_atomic_fmax on GFX10
Reviewed By: foad, rampitec
Differential Revision: https://reviews.llvm.org/D96309
For x86-64 the REX.w prefix takes precedence over any other size
override (i.e. 0x66). Therefore, for x86-64 when REX.w is present set
'hasOpSize' to false to ensure that any size override is ignored.
Fixes PR48901.
Differential Revision: https://reviews.llvm.org/D95682
With tfe on there can be a vgpr write to vdata+1.
Add tablegen support for 5 register vdata store.
This is required for 4 register vdata store with tfe.
Differential Revision: https://reviews.llvm.org/D94960
Legacy AIX assembly might not support all extended mnes,
add one feature bit to control the generation in MC,
and avoid generating them by default on AIX.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D94458
This removes `exnref` type and `br_on_exn` instruction. This is
effectively NFC because most uses of these were already removed in the
previous CLs.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94041
These instructions read their inputs from fixed registers rather
than using a modrm byte. We shouldn't require the user to list them
when parsing assembly. This matches the GNU assembler.
This patch adds InstAliases so we can accept either form. It also
changes the printing code to use the form without registers. This
will change the behavior of llvm-objdump, but should be consistent
with binutils objdump. This also matches what we already do in LLVM for
clzero and monitorx which also used fixed registers.
I need to add and improve tests before this can be commited. The
disassembler tests exist, but weren't checking the fixed register
so they pass before and after this change.
Fixes https://github.com/ClangBuiltLinux/linux/issues/1216
Differential Revision: https://reviews.llvm.org/D93524
This introduces asm support for the Branch Record Buffer extension, through
the new 'brbe' subtarget feature. It consists of a new set of system registers
that enable the handling of branch records.
Patch written by Simon Tatham.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D92389
This adds support for the v8.7-A LD64B/ST64B Accelerator extension
through a subtarget feature called "ls64". It adds four 64-byte
load/store instructions with an operand in the new GPR64x8 register
class, and one system register that's part of the same extension.
Based on patches written by Simon Tatham.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D91775
This introduces support for the v8.7-A architecture through a new
subtarget feature called "v8.7a". It adds two new "WFET" and "WFIT"
instructions, the nXS limited-TLB-maintenance qualifier for DSB and TLBI
instructions, a new CPU id register, ID_AA64ISAR2_EL1, and the new
HCRX_EL2 system register.
Based on patches written by Simon Tatham and Victor Campos.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D91772
I think the global_load/store_dword_addtid instructions support
switching off the scalar address.
Add assembler and disassembler support for this.
Differential Revision: https://reviews.llvm.org/D93288
This makes the llvm-objdump output much more readable and closer to binutils objdump. This builds on D76591
It requires changing the OperandType for certain immediates to "OPERAND_PCREL" so tablegen will generate code to pass the instruction's address. This means we can't do the generic check on these instructions in verifyInstruction any more. Should I add it back with explicit opcode checks? Or should we add a new operand flag to control the passing of address instead of matching the name?
Differential Revision: https://reviews.llvm.org/D92147
These are opsel opcodes with op_sel actually being ignored.
As a such op_sel_hi needs to be set to default 1 even though
these bits are ignored. This is compatibility change.
Differential Revision: https://reviews.llvm.org/D91202
This patch mainly made the following changes:
1. Support AVX-VNNI instructions;
2. Introduce ExplicitVEXPrefix flag so that vpdpbusd/vpdpbusds/vpdpbusds/vpdpbusds instructions only use vex-encoding when user explicity add {vex} prefix.
Differential Revision: https://reviews.llvm.org/D89105
By setting up the AsmStrings correctly we can remove some special cases
from AMDGPUInstPrinter::printOffset.
Differential Revision: https://reviews.llvm.org/D90307
The 0xf3 prefix has been defined as wbnoinvd on Icelake Server. So
the prefix isn't ignored by the CPU. AMD documentation suggests that
wbnoinvd is treated as wbinvd on older processors. Intel documentation
is not clear. Perhaps 0xf2 and 0x66 are treated the same, but its
not documented.
This patch changes TB to PS in the td file so 0xf2 and 0x66 will
be treated as errors. This matches versions of objdump after
wbnoinvd was added.
GFX10 enables third addressing mode for flat scratch instructions,
an ST mode. In that mode both register operands are omitted and
only swizzled offset is used in addition to flat_scratch base.
Differential Revision: https://reviews.llvm.org/D89501
This instruction was introduced in GFX10.3, reusing the opcode of
v_mac_legacy_f32 from GFX10.1.
Differential Revision: https://reviews.llvm.org/D89247
This patch adds outer product instructions for MMA, including related infrastructure, and their tests.
Depends on D84968.
Reviewed By: #powerpc, bsaleil, amyk
Differential Revision: https://reviews.llvm.org/D88043
Key Locker provides a mechanism to encrypt and decrypt data with an AES key without having access
to the raw key value by converting AES keys into “handles”. These handles can be used to perform the
same encryption and decryption operations as the original AES keys, but they only work on the current
system and only until they are revoked. If software revokes Key Locker handles (e.g., on a reboot),
then any previous handles can no longer be used.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D88398
This patch adds the xxmfacc, xxmtacc and xxsetaccz instructions to manipulate
accumulator registers. It also adds the ACC register class definition for the
accumulator registers.
Differential Revision: https://reviews.llvm.org/D84847
This patch adds support for the lxvp, lxvpx, plxvp, stxvp, stxvpx and pstxvp
instructions in the PowerPC backend. These instructions allow loading and
storing VSX register pairs. This patch also adds the VSRp register class
definition needed for these instructions.
Differential Revision: https://reviews.llvm.org/D84359
This patch adds the instruction definitions and assembly/disassembly tests for
the set boolean condition instructions. This also includes the negative, and
reverse variants of the instruction.
Differential Revision: https://reviews.llvm.org/D86252
This patch adds the td instruction definitions of the xvcvspbf16 and xvcvbf16spn
instructions, along with their respective MC tests.
Differential Revision: https://reviews.llvm.org/D86794
The VGPR component is a 32-bit offset, not 64-bits.
I'm not sure what the correct syntax is for this. This maintains the
vaddr position and leaves saddr in the end "off" position. This is
particularly terrible for stores, since the operand order is now <vgpr
offset>, <data>, <sgpr base>, splitting the pointer operands. I
suppose this is a logical consequence from the mistake of not putting
the data operand first. I'm not sure what sp3 does.
This patch adds the instruction definitions and assembly/disassembly tests for
the following set of instructions:
Vector Extract [byte | half | word | doubleword | quad] with mask
Vector Expand [byte | half | word | doubleword | quad] with mask
Move to VSR [byte | byte immediate | half | word | doubleword | quad] with mask
Vector Count Mask Bits [byte | half | word | doubleword]
Differential Revision: https://reviews.llvm.org/D83724
This patch implements the instruction definition and MC tests for the vector
string isolate instructions.
Differential Revision: https://reviews.llvm.org/D84197
This patch adds the td definitions and asm/disasm tests for the following instructions:
Vector Extract Double Left Index - vextdubvlx, vextduhvlx, vextduwvlx, vextddvlx
Vector Extract Double Right Index - vextdubvrx, vextduhvrx, vextduwvrx, vextddvrx
Differential Revision: https://reviews.llvm.org/D84384
Currently supported LLVM MTBUF syntax is shown below. It is not compatible with SP3.
op dst, addr, rsrc, FORMAT, soffset
This change adds support for SP3 syntax:
op dst, addr, rsrc, soffset SP3FORMAT
In addition to being compatible with SP3, this syntax allows using symbolic names for data, numeric and unified formats. Below is a list of added syntax variants.
format:<expression>
format:[<numeric-format-name>,<data-format-name>]
format:[<data-format-name>,<numeric-format-name>]
format:[<data-format-name>]
format:[<numeric-format-name>]
format:[<unified-format-name>]
The last syntax variant is supported for GFX10 only.
See llvm bug 37738
Reviewers: arsenm, rampitec, vpykhtin
Differential Revision: https://reviews.llvm.org/D84026
16-bit literals are encoded as 32-bit values. If high 16-bits of the value is 0xFFFF, the decoded instruction cannot be reassembled.
For example, the following code
0xff,0x04,0x04,0x52,0xcd,0xab,0xff,0xff
was decoded as
v_mul_lo_u16_e32 v2, 0xffffabcd, v2
However this literal is actually a 64-bit constant 0x00000000ffffabcd which violates requirements described in the documentation - the truncation is not safe.
This change corrects decoding to make reassembly possible.
Reviewers: arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D84098
Summary:
This fixes Bugzilla #46616 in which it was reported
that "tbb [pc, r0]" was marked as SoftFail
(aka unpredictable) incorrectly.
Expected behaviour is:
* ARMv8 is required to use sp as rn or rm
(tbb/tbh only have a Thumb encoding so using Arm mode
is not an option)
* If rm is the pc then the instruction is always
unpredictable
Some of this was implemented already and this fixes the
rest. Added tests cover the new and pre-existing handling.
Reviewers: ostannard
Reviewed By: ostannard
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84227
This patch adds the instruction definitions and MC tests for the 128-bit Binary
Integer Operation instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D83516
Vector bitwise selects are matched by pseudo VBSP instruction
and expanded to VBSL/VBIT/VBIF after register allocation
depend on operands registers to minimize extra copies.
MTBUF implementation has many issues and this change addresses most of these:
- refactored duplicated code;
- hardcoded constants moved out of high-level code;
- fixed a decoding error when nfmt or dfmt are zero (bug 36932);
- corrected parsing of operand separators (bug 46403);
- corrected handling of missing operands (bug 46404);
- corrected handling of out-of-range modifiers (bug 46421);
- corrected default value (bug 46467).
Reviewers: arsenm, rampitec, vpykhtin, artem.tamazov, kzhuravl
Differential Revision: https://reviews.llvm.org/D83760
This patch upstreams support for the Arm-v8 Cortex-A78 and Cortex-X1
processors for AArch64 and ARM.
In detail:
- Adding cortex-a78 and cortex-x1 as cpu options for aarch64 and arm targets in clang
- Adding Cortex-A78 and Cortex-X1 CPU names and ProcessorModels in llvm
details of the CPU can be found here:
https://www.arm.com/products/cortex-xhttps://www.arm.com/products/silicon-ip-cpu/cortex-a/cortex-a78
The following people contributed to this patch:
- Luke Geeson
- Mikhail Maltsev
Reviewers: t.p.northover, dmgreen
Reviewed By: dmgreen
Subscribers: dmgreen, kristof.beyls, hiraditya, danielkiss, cfe-commits,
llvm-commits, miyuki
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D83206
This patch adds the instruction definitions and the assembly/disassembly
tests for the Load/Store VSX Vector Rightmose instructions.
Differential Revision: https://reviews.llvm.org/D83364
This patch upstreams support for the Arm-v8 Cortex-A77
processor for AArch64 and ARM.
In detail:
- Adding cortex-a77 as a cpu option for aarch64 and arm targets in clang
- Cortex-A77 CPU name and ProcessorModel in llvm
details of the CPU can be found here:
https://www.arm.com/products/silicon-ip-cpu/cortex-a/cortex-a77
and a similar submission to GCC can be found here:
e0664b7a63
The following people contributed to this patch:
- Luke Geeson
- Mikhail Maltsev
Reviewers: t.p.northover, dmgreen, ostannard, SjoerdMeijer
Reviewed By: dmgreen
Subscribers: dmgreen, kristof.beyls, hiraditya, danielkiss, cfe-commits,
llvm-commits, miyuki
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D82887
This patch adds the td definitions and asm/disasm tests for the
following instructions:
XXSPLTIW
XXSPLTIDP
XXSPLTI32DX
XXPERMX
XXBLENDVB
XXBLENDVH
XXBLENDVW
XXBLENDVD
VSLDBI
VSRDBI
Differential Revision: https://reviews.llvm.org/D82896
Rename `future*` encoding test files to include ISA3.1 in the file name
and combine with exisitng ISA3.1 instruction encoding tests that were
added into `p10*` test files.
Keeping the `p10*` files for now to ensure we don't add more to it.
Will remove once all ISA3.1 instruction are implemented.
Summary:
LDRAA and LDRAB in their writeback variant should softfail when the same
register is used as result and base.
This patch adds a custom decoder that catches such case and emits a
warning when it occurs.
Differential Revision: https://reviews.llvm.org/D82541
This patch implements builtins for the following prototypes:
unsigned long long __builtin_cntlzdm (unsigned long long, unsigned long long)
unsigned long long __builtin_cnttzdm (unsigned long long, unsigned long long)
vector unsigned long long vec_cntlzm (vector unsigned long long, vector unsigned long long)
vector unsigned long long vec_cnttzm (vector unsigned long long, vector unsigned long long)
Differential Revision: https://reviews.llvm.org/D80941
This patch implements builtins for the following prototypes for the VSX Permute
Control Vector Generate with Mask Instructions:
vector unsigned char vec_genpcvm (vector unsigned char, const int);
vector unsigned short vec_genpcvm (vector unsigned short, const int);
vector unsigned int vec_genpcvm (vector unsigned int, const int);
vector unsigned long long vec_genpcvm (vector unsigned long long, const int);
Differential Revision: https://reviews.llvm.org/D81774
This patch implements builtins for the following prototypes:
```
vector signed char vec_clrl (vector signed char a, unsigned int n);
vector unsigned char vec_clrl (vector unsigned char a, unsigned int n);
vector signed char vec_clrr (vector signed char a, unsigned int n);
vector signed char vec_clrr (vector unsigned char a, unsigned int n);
```
Differential Revision: https://reviews.llvm.org/D81707
We were missing the modrm byte this instruction has according
to current Intel SDM. Experiments with gcc indicate that different
modrm values are chosen based on 2 operands so I've added those
as well.
I think our previous implementation was based on an older behavior of
binutils that has since been changed.
These are documented as using modrm byte of 0xe8, 0xf0, and 0xf8
respectively. But hardware ignore bits 2:0. So 0xe9-0xef is treated
the same as 0xe8. Similar for the other two.
Fixing this required adding 8 new formats to the X86 instructions
to convey this information. Could have gotten away with 3, but
adding all 8 made for a more logical conversion from format to
modrm encoding.
I renumbered the format encodings to keep the register modrm
formats grouped together.
This patch implements builtins for the following prototypes:
vector unsigned long long vec_pdep(vector unsigned long long, vector unsigned long long);
vector unsigned long long vec_pext(vector unsigned long long, vector unsigned long long __b);
unsigned long long __builtin_pdepd (unsigned long long, unsigned long long);
unsigned long long __builtin_pextd (unsigned long long, unsigned long long);
Revision Depends on D80758
Differential Revision: https://reviews.llvm.org/D80935
It seems to be a hardware defect that the half inline constants do not
work as expected for the 16-bit integer operations (the inverse does
work correctly). Experimentation seems to show these are really
reading the 32-bit inline constants, which can be observed by writing
inline asm using op_sel to see what's in the high half of the
constant. Theoretically we could fold the high halves of the 32-bit
constants using op_sel.
The *_asm_all.s MC tests are broken, and I don't know where the script
to autogenerate these are. I started manually fixing it, but there's
just too many cases to fix. This also does break the
assembler/disassembler support for these values, and I'm not sure what
to do about it. These are still valid encodings, so it seems like you
should be able to use them in some way. If you wrote assembly using
them, you could have really meant it (perhaps to read the high bits
with op_sel?). The disassembler will print the invalid literal
constant which will fail to re-assemble. The behavior is also
different depending on the use context. Consider this example, which
was previously accepted and encoded using the inline constant:
v_mad_i16 v5, v1, -4.0, v3
; encoding: [0x05,0x00,0xec,0xd1,0x01,0xef,0x0d,0x04]
In contexts where an inline immediate is required (such as on gfx8/9),
this will now be rejected. For gfx10, this will produce the literal
encoding and change the printed format:
v_mad_i16 v5, v1, 0xc400, v3
; encoding: [0x05,0x00,0x5e,0xd7,0x01,0xff,0x0d,0x04,0x00,0xc4,0x00,0x00]
This is just another variation of the issue that we don't perfectly
handle round trip assembly/disassembly due to not tracking how
immediates were encoded. This doesn't matter much in practice, since
compilers don't emit the suboptimal encoding. I doubt any users are
relying on this behavior (although I did make use of the old behavior
to figure out what was wrong).
Fixes bug 46302.
Summary:
We have defined MTSPR/MFSPR and MTSPR8/MFSPR8, but we only defined
mtspr/mfspr InstAlias for some MTSPR/MFSPR.
This patch is to add the InstAlias definitions for MTSPR8/MFSPR8,
and add the some new mtspr/mfspr InstAlias we may use.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D77531
Shao-Ce SUN