Previously we made `libomptarget` link as an LLVM library so we have
access to the LLVM core libraries. After the initial patch stuck we can
now apply the same changes to the plugins. This will allow us to use
LLVM in all of `libomptarget` when we have uses for them. In the future
this should allow us to remove the dependencies on `libelf`, `libffi`,
and `dl`.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D130262
We are planning on making LTO the default compilation mode for
offloading. In order to make sure it works we should run these tests on
the test suite. AMDGPU already uses the LTO compilation path for its
linking, but in LTO mode it also links the static library late.
Performing LTO requires the static library to be built, if we make the
change this will be a hard requirement and the old bitcode library will
go away. This means users will need to use either a two-step build or a
runtimes build for libomptarget.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D127512
We used to globally include the libomptarget include directory for all
projects. This caused some conflicts with the other files named
"Debug.h". This patch changes the cmake to include these files via the
target include instead.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D125563
Previously an opt-in flag `-fopenmp-new-driver` was used to enable the
new offloading driver. After passing tests for a few months it should be
sufficiently mature to flip the switch and make it the default. The new
offloading driver is now enabled if there is OpenMP and OpenMP
offloading present and the new `-fno-openmp-new-driver` is not present.
The new offloading driver has three main benefits over the old method:
- Static library support
- Device-side LTO
- Unified clang driver stages
Depends on D122683
Differential Revision: https://reviews.llvm.org/D122831
In a clean build directory, `check-openmp` or `check-libomptarget` will fail because of missing device RTL .bc files. Ensure that the new targets new custom targets `omptarget.devicertl.nvptx` and `omptarget.devicertl.amdgpu` (corresponding to the plugin rtl targets `omptarget.rtl.cuda`, respectively `omptarget.rlt.amdgpu` ) are dependencies of the regression tests.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D123177
`LIBOMPTARGET_LLVM_INCLUDE_DIRS` is currently checked and included for
multiple times redundantly. This patch is simply a clean up.
Reviewed By: jhuber6
Differential Revision: https://reviews.llvm.org/D121055
This patch enables running the new driver tests for AMDGPU. Previously
this was disabled because some tests failed. This was only because the
new driver tests hadn't been listed as unsupported or expected to fail.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D119240
This patch completely removes the old OpenMP device runtime. Previously,
the old runtime had the prefix `libomptarget-new-` and the old runtime
was simply called `libomptarget-`. This patch makes the formerly new
runtime the only runtime available. The entire project has been deleted,
and all references to the `libomptarget-new` runtime has been replaced
with `libomptarget-`.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D118934
This patch adds a new target to the tests to run using the new driver as
the method for generating offloading code.
Depends on D116541
Differential Revision: https://reviews.llvm.org/D118637
amdgpu plugin depends on libhsa-runtime64 library. Add runpath in case it is not on the LD_LIBRARY_PATH.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D115198
This was trying to figure out the build path for amdgpu-arch, and
making assumptions about where it is which were not working on my
system. Whether a standalone build or not, we should have a proper
imported target to get the location from.
Passes same tests as the current deviceRTL. Includes cmake change from D111987.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D112227
Implemented by patching python config instead of modifying all
the tests so that -generic and XFAIL work as usual. Expectation is for
this to be reverted once the old runtime is deleted.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D112225
Use the same debug print as the rest of libomptarget plugins with
the same environment control. Also drop the max queue size debugging hook as
I don't believe it is still in use, can bring it back near the rest of the env
handling in rtl.cpp if someone objects.
That makes most of rt.h and all of utils.cpp unused. Clean that up and simplify
control flow in a couple of places.
Behaviour change is that debug prints that used to use the old environment
variable now use the new one and print in slightly different format, and the
removal of the max queue size variable.
Reviewed By: pdhaliwal
Differential Revision: https://reviews.llvm.org/D108784
With uses of g_atl_machine gone, a significant portion of dead
code has been removed.
This patch depends on D104691 and D104695.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D104696
On FreeBSD, the `environ` symbol is undefined at link time for shared
libraries, but resolved by the dynamic linker at runtime. Therefore,
allow the symbol to be undefined when creating a shared library, by
using the `--allow-shlib-undefined` linker flag, instead of `-z defs`
(a.k.a `--no-undefined`).
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D107698
Default to building the amdgpu plugin to use dlopen when hsa is
not found instead of disabling it.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D106600
Default to building the amdgpu plugin to use dlopen when hsa is
not found instead of disabling it.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D106600
AMDGPU plugin equivalent of D95155, build without HSA installed locally
Compiles a new file, plugins/amdgpu/dynamic_hsa/hsa.cpp, to an object file that
exposes the same symbols that the plugin presently uses from hsa. The object
file contains dlopen of hsa and cached dlsym calls. Also provides header files
corresponding to the subset that is used.
This is behind a feature flag, LIBOMPTARGET_FORCE_DLOPEN_LIBHSA, default off.
That allows developers to build against the dlopen/dlsym implementation, e.g.
while testing this mode.
Enabling by default will cause this plugin to build on a wider variety of
machines than it does at present so may break some CI builds. That risk can
be minimised by reviewing the header dependencies of the library and ensuring
it doesn't use any libraries that are not already used by libomptarget.
Separating the implementation from enabling by default in case the latter needs
to be rolled back after wider CI results.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D106559
This change-set removes libelf usage from elf_common part of the plugins.
libelf is still used in x86_64 generic plugin code and in some plugins
(e.g. amdgpu) - these will have to be cleaned up in separate checkins.
Differential Revision: https://reviews.llvm.org/D103545
This patch prevents runtime tests running on systems without amdgpu.
Reviewed By: protze.joachim, tianshilei1992
Differential Revision: https://reviews.llvm.org/D102054
Some LLVM headers are generated by CMake. Before the installation,
LLVM's headers are distributed everywhere, some of which are in
`${LLVM_SRC_ROOT}/llvm/include/llvm`, and some are in
`${LLVM_BINARY_ROOT}/include/llvm`. After intallation, they're all in
`${LLVM_INSTALLATION_ROOT}/include/llvm`.
OpenMP now depends on LLVM headers. Some headers depend on headers generated
by CMake. When building OpenMP along with LLVM, a.k.a via `LLVM_ENABLE_RUNTIMES`,
we need to tell OpenMP where it can find those headers, especially those still
have not been copied/installed.
Reviewed By: jdoerfert, jhuber6
Differential Revision: https://reviews.llvm.org/D94534
For now `elf_common.c` is taken as a common part included into
different plugin implementations directly via
`#include "../../common/elf_common.c"`, which is not a best practice. Since it
is simple enough such that we don't need to create a real library for it, we just
take it as a interface library so that other targets can link it directly. Another
advantage of this method is, we don't need to add the folder into header search
path which can potentially pollute the search path.
VE and AMD platforms have not been tested because I don't have target machines.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D94443
[libomptarget] Require LLVM source tree to build libomptarget
This is to permit reliably #including files from the LLVM tree in libomptarget,
as an improvement on the copy and paste that is currently in use. See D87841
for the first example of removing duplication given this new requirement.
The weekly openmp dev call reached consensus on this approach. See also D87841
for some alternatives that were considered. In the future, we may want to
introduce a new top level repo for shared constants, or start using the ADT
library within openmp.
This will break sufficiently exotic build systems, trivial fixes as below.
Building libomptarget as part of the monorepo will continue to work.
If openmp is built separately, it now requires a cmake macro indicating
where to find the LLVM source tree.
If openmp is built separately, without the llvm source tree already on disk,
the build machine will need a copy of a subset of the llvm source tree and
the cmake macro indicating where it is.
Reviewed By: protze.joachim
Differential Revision: https://reviews.llvm.org/D89426
[openmp][libomptarget] Include header from LLVM source tree
The change is to the amdgpu plugin so is unlikely to break anything.
The point of contention is whether libomptarget can depend on LLVM.
A community discussion was cautiously not opposed yesterday.
This introduces a compile time dependency on the LLVM source tree, in this case
expressed as skipping the building of the plugin if LLVM_MAIN_INCLUDE_DIR is not
set. One the source files will #include llvm/Frontend/OpenMP/OMPGridValues.h,
instead of copy&pasting the numbers across.
For users that download the monorepo, the llvm tree is already on disk. This will
inconvenience users who download only the openmp source as a tar, as they would
now also have to download (at least a file or two) from the llvm source, if they want
to build the parts of the openmp project that (post this patch) depend on llvm.
There was interest expressed in going further - using llvm tools as part of
building libomp, or linking against llvm libraries. That seems less clear cut
an improvement and worthy of further discussion. This patch seeks only to change
policy to support openmp depending on the llvm source tree. Including in the
other direction, or using libraries / tools etc, are purposefully out of scope.
Reviewers are a best guess at interested parties, please feel free to add others
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D87841
[libomptarget] Implement host plugin for amdgpu
Replacement for D71384. Primary difference is inlining the dependency on atmi
followed by extensive simplification and bugfixes. This is the latest version
from https://github.com/ROCm-Developer-Tools/amd-llvm-project/tree/aomp12 with
minor patches and a rename from hsa to amdgpu, on the basis that this can't be
used by other implementations of hsa without additional work.
This will not build unless the ROCM_DIR variable is passed so won't break other
builds. That variable is used to locate two amdgpu specific libraries that ship
as part of rocm:
libhsakmt at https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface
libhsa-runtime64 at https://github.com/RadeonOpenCompute/ROCR-Runtime
These libraries build from source. The build scripts in those repos are for
shared libraries, but can be adapted to statically link both into this plugin.
There are caveats.
- This works well enough to run various tests and benchmarks, and will be used
to support the current clang bring up
- It is adequately thread safe for the above but there will be races remaining
- It is not stylistically correct for llvm, though has had clang-format run
- It has suboptimal memory management and locking strategies
- The debug printing / error handling is inconsistent
I would like to contribute this pretty much as-is and then improve it in-tree.
This would be advantagous because the aomp12 branch that was in use for fixing
this codebase has just been joined with the amd internal rocm dev process.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85742
Joseph Huber