Summary: I was building lldb using cross mingw-w64 toolchain on Linux and observed some issues. This is first patch in the series to fix that build. It mostly corrects the case of include files and adjusts some #ifdefs from _MSC_VER to _WIN32 and vice versa. I built lldb on windows with VS after applying this patch to make sure it does not break the build there.
Reviewers: zturner, labath, abidh
Subscribers: ki.stfu, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D27759
llvm-svn: 289821
This diff
1. Adds a comment to ObjectFileELF.cpp about the current
approach to determining the OS.
2. Replaces the check in SymbolFileDWARF.cpp with a more robust one.
Test plan:
Built (on Linux) a test binary linked to a c++ shared library
which contains just an implementation of a function TestFunction,
the library (the binary itself) doesn't contain ELF notes
and EI_OSABI is set to System V.
Checked in lldb that now "p TestFunction()" works fine
(and doesn't work without this patch).
Differential revision: https://reviews.llvm.org/D27380
llvm-svn: 288687
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
We shouldn't access past the end of an array, even if we think that the
layout of the struct containing the array is always what we expect. The
compiler is free to optimize away the stores as undefined behavior, and
in fact, GCC 6.2.1 claims it will do exactly this.
llvm-svn: 286093
Summary:
.. handling for windows path was completely broken because the function was
expecting \ as path separators, but we were passing it normalized file paths,
where these have been replaced by forward slashes. Apart from this, the function
was incorrect for posix paths as well in some corner cases, as well as being
generally hard to follow.
The corner cases were:
- /../bar -> should be same as /bar
- /bar/.. -> should be same as / (slightly dodgy as the former depends on /bar actually
existing, but since we're doing it in an abstract way, I think the
transformation is reasonable)
I rewrite the function to fix these corner cases and handle windows paths more
correctly. The function should now handle the posix paths (modulo symlinks, but
we cannot really do anything about that without a real filesystem). For windows
paths, there are a couple of corner cases left, mostly to do with drive letter
handling, which cannot be fixed until the rest of the class understands drive
letters better.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26081
llvm-svn: 285593
Summary:
When the local lldb doesn't have access to a copy of the modules in the target, e.g. winphone, with this change now we read these modules from memory.
There are mainly 2 changes:
1. create pecoff object files from memory
2. read from memory when the local file is not available
Reviewers: sas, fjricci, zturner
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D24284
llvm-svn: 284422
Summary:
ObjectFileELF::RefineModuleDetailsFromNote() identifies Linux core dumps by searching for
library paths starting with /lib/x86_64-linux-gnu or /lib/i386-linux-gnu. This change widens the
test to allow for linux installations which have addition directories in the path.
Reviewers: ted, hhellyer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25179
llvm-svn: 284114
Summary:
It fixes the following compile warnings:
1. '0' flag ignored with precision and ‘%d’ gnu_printf format
2. enumeral and non-enumeral type in conditional expression
3. format ‘%d’ expects argument of type ‘int’, but argument 4 has type ...
4. enumeration value ‘...’ not handled in switch
5. cast from type ‘const uint64_t* {aka ...}’ to type ‘int64_t* {aka ...}’ casts away qualifiers
6. extra ‘;’
7. comparison between signed and unsigned integer expressions
8. variable ‘register_operand’ set but not used
9. control reaches end of non-void function
Reviewers: jingham, emaste, zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24331
llvm-svn: 281191
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
and we couldn't find a dyld binary on the debug system, override
that setting and read dyld out of memory - we need to put an
internal breakpoint on dyld to register binaries being loaded or
unloaded; the debugger won't work right without dyld symbols.
<rdar://problem/27857025>
llvm-svn: 279704
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
Summary:
There were places in the code, assuming(hardcoding) offsets
and types that were only valid for the x86_64 elf core file format.
The NT_PRSTATUS and NT_PRPSINFO structures are with the 64 bit layout.
I have reused them and parse i386 files manually, and fill them in the
same struct.
Also added some error handling during parsing that checks if the
available bytes in the buffer are enough to fill the structures.
The i386 core file test case now passes.
For reference on the structures layout, I generally used the
source of binutils (bfd, readelf)
Bug: https://llvm.org/bugs/show_bug.cgi?id=26947
Reviewers: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D22917
llvm-svn: 277140
cache from ObjectFileMachO (very wrong place) to the DynamicLoader
plugins (better place). Not much change to the code itself, although
the old ObjectFileMachO method would try both the new dyld SPI and
reading the dyld_all_image_infos structure. In the new methods,
I've separated those into the appropriate DynamicLoader plugins.
llvm-svn: 277088
debugserver jGetSharedCacheInfo packet instead of reading
the dyld internal data structures directly. This code is
(currently) only used for ios native lldb's - I should really
move this ObjectFileMachO::GetProcessSharedCacheUUID method
somewhere else, it makes less and less sense being in the
file reader.
<rdar://problem/25251243>
llvm-svn: 276369
These are artifical symbols inside android oat files without any value
for the user while causing a significant perfoamce hit inside the
unwinder. We were already ignoring it inside system@framework@boot.oat
bot they have to be ignored in every oat file. Considering that oat
files are only used on android this have no effect on any other
platfrom.
llvm-svn: 274500
for TestNamespaceLookup.py; didn't see anything obviously wrong so I'll
need to look at this more closely before re-committing. (passed OK on
macOS ;)
llvm-svn: 273531
There's uses of "macosx" that will be more tricky to
change, like in triples (e.g. "x86_64-apple-macosx10.11") -
for now I'm just updating source comments and strings printed
for humans.
llvm-svn: 273524
In order to make this happen, I have added permissions to sections so that we can know what the permissions are for a given section, and modified both core file plug-ins to override Process::GetMemoryRegionInfo() and answer things correctly.
llvm-svn: 272276
which looks for binaries missing an LC_FUNCTION_STARTS section because
it was stripped/not emitted. If we see a normal user process binary
(executable, dylib, framework, bundle) without LC_FUNCTION_STARTS, that
is unusual and we should disallow instruction emulation because that
binary has likely been stripped a lot.
If this is a non-user process binary -- a kernel, a standalone bare-board
binary, a kernel extension (kext) -- and there is no LC_FUNCTION_STARTS,
we should not assume anything about the binary and allow instruction
emulation as we would normally do.
<rdar://problem/26453952>
llvm-svn: 270818
missing an LC_FUNCTION_STARTS section, we assume it has been
aggressively stripped (it is *very* unusual for anyone to strip
LC_FUNCTION_STARTS) so we disable assembly instruction unwind plan
creation.
Kernel extensions (kexts) don't have LC_FUNCTION_STARTS, but we
almost always have good symbol bounds just with the linker symbols.
So add an exception to allow assembly instruction unwind plan
creation for kexts even though they lack LC_FUNCTION_STARTS.
<rdar://problem/26453952>
llvm-svn: 270618
Patch by Nitesh Jain.
Summary: These patch fix thread step-out for hard and soft float.
Reviewers: jaydeep, bhushan, clayborg
Differential Revision: http://reviews.llvm.org/D20416
llvm-svn: 270564
The CL causes a build breakage on platforms where sizeof(double) == sizeof(long double)
and it incorrectly assumes that sizeof(double) and sizeof(long double) is the same
on the host and the target.
llvm-svn: 270214
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
Patch by Nitesh Jain.
Summary: The ArchSpec::m_flags will be set based on ELF flag ABI.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits, mohit.bhakkad, sagar, jaydeep, bhushan
Differential: D18858
llvm-svn: 269181
should not be used for this module -- for use when an ObjectFile
knows that it does not have meaningful or accurate function start
addresses.
More commonly, it is not clear that function start addresses are
missing in a module. There are certain cases on Mac OS X where we
can tell that a Mach-O binary has been stripped of this essential
information, and the unwinder can end up emulating many megabytes
of instructions for a single "function" in the binary.
When a Mach-O binary is missing both an LC_FUNCTION_STARTS load
command (very unusual) and an eh_frame section, then we will assume
it has also been stripped of symbols and that instruction emulation
will not be useful on this module.
<rdar://problem/25988067>
llvm-svn: 268475
Remove case handling elf arm attribute Tag_THUMB_ISA_use and setting architecture to thumb.
Differential revision: http://reviews.llvm.org/D19520
llvm-svn: 267550
Make sure we figure out correct plt entry field in case linker has generated a small value below realistic entry size like 4 bytes or below.
Differential revision: http://reviews.llvm.org/D19252
llvm-svn: 267405
RegisterContextLLDB::InitializeNonZerothFrame already has code to attempt
to detect and handle the case where the PC points beyond the end of a
function, but there are certain cases where this doesn't work correctly.
In fact, there are *two* different places where this detection is attempted,
and the failure is in fact a result of an unfortunate interaction between
those two separate attempts.
First, the ResolveSymbolContextForAddress routine is called with the
resolve_tail_call_address flag set to true. This causes the routine
to internally accept a PC pointing beyond the end of a function, and
still resolving the PC to that function symbol.
Second, the InitializeNonZerothFrame routine itself maintains a
"decr_pc_and_recompute_addr_range" flag and, if that turns out to
be true, itself decrements the PC by one and searches again for
a symbol at that new PC value.
Both approaches correctly identify the symbol associated with the PC.
However, the problem is now that later on, we also need to find the
DWARF CFI record associated with the PC. This is done in the
RegisterContextLLDB::GetFullUnwindPlanForFrame routine, and uses
the "m_current_offset_backed_up_one" member variable.
However, that variable only actually contains the PC "backed up by
one" if the *second* approach above was taken. If the function was
already identified via the first approach above, that member variable
is *not* backed up by one but simply points to the original PC.
This in turn causes GetEHFrameUnwindPlan to not correctly identify
the DWARF CFI record associated with the PC.
Now, in many cases, if the first method had to back up the PC by one,
we *still* use the second method too, because of this piece of code:
// Or if we're in the middle of the stack (and not "above" an asynchronous event like sigtramp),
// and our "current" pc is the start of a function...
if (m_sym_ctx_valid
&& GetNextFrame()->m_frame_type != eTrapHandlerFrame
&& GetNextFrame()->m_frame_type != eDebuggerFrame
&& addr_range.GetBaseAddress().IsValid()
&& addr_range.GetBaseAddress().GetSection() == m_current_pc.GetSection()
&& addr_range.GetBaseAddress().GetOffset() == m_current_pc.GetOffset())
{
decr_pc_and_recompute_addr_range = true;
}
In many cases, when the PC is one beyond the end of the current function,
it will indeed then be exactly at the start of the next function. But this
is not always the case, e.g. if there happens to be alignment padding
between the end of one function and the start of the next.
In those cases, we may sucessfully look up the function symbol via
ResolveSymbolContextForAddress, but *not* set decr_pc_and_recompute_addr_range,
and therefore fail to find the correct DWARF CFI record.
A very simple fix for this problem is to just never use the first method.
Call ResolveSymbolContextForAddress with resolve_tail_call_address set
to false, which will cause it to fail if the PC is beyond the end of
the current function; or else, identify the next function if the PC
is also at the start of the next function. In either case, we will
then set the decr_pc_and_recompute_addr_range variable and back up the
PC anyway, but this time also find the correct DWARF CFI.
A related problem is that the ResolveSymbolContextForAddress sometimes
returns a "symbol" with empty name. This turns out to be an ELF section
symbol. Now, usually those get type eSymbolTypeInvalid. However, there
is code in ObjectFileELF::ParseSymbols that tries to change the type of
invalid symbols to eSymbolTypeCode or eSymbolTypeData if the symbol
lies within the code or data section.
Unfortunately, this check also hits the symbol for the code section
itself, which is then marked as eSymbolTypeCode. While the size of
the section symbol is 0 according to the ELF file, LLDB considers
this size invalid and attempts to figure out the "correct" size.
Depending on how this goes, we may end up with a symbol that overlays
part of the code section, even outside areas covered by real function
symbols.
Therefore, if we call ResolveSymbolContextForAddress with PC pointing
beyond the end of a function, we may get this bogus section symbol.
This again means InitializeNonZerothFrame thinks we have a valid PC,
but then we don't find any unwind info for it.
The fix for this problem is me to simply always leave ELF section
symbols as type eSymbolTypeInvalid.
Differential Revision: http://reviews.llvm.org/D18975
llvm-svn: 267363
This adds basic parsing of the EABI attributes section. This section contains
additional information about the target for which the file was built. Attempt
to infer additional architecture information from that section.
llvm-svn: 267291
Code in ObjectFileELF::ParseTrampolineSymbols assumes that the sh_info
field of the .rel(a).plt section identifies the .plt section.
However, with recent GNU ld this is no longer true. As a result of this:
https://sourceware.org/bugzilla/show_bug.cgi?id=18169
in object files generated with current linkers the sh_info field of
.rel(a).plt now points to the .got.plt section (or .got on some targets).
This causes LLDB to fail to identify any PLT stubs, causing a number of
test case failures.
This patch changes LLDB to simply always look for the .plt section by
name. This should be safe across all linkers and targets.
Differential Revision: http://reviews.llvm.org/D18973
llvm-svn: 266316
This patch adds support for Linux on SystemZ:
- A new ArchSpec value of eCore_s390x_generic
- A new directory Plugins/ABI/SysV-s390x providing an ABI implementation
- Register context support
- Native Linux support including watchpoint support
- ELF core file support
- Misc. support throughout the code base (e.g. breakpoint opcodes)
- Test case updates to support the platform
This should provide complete support for debugging the SystemZ platform.
Not yet supported are optional features like transaction support (zEC12)
or SIMD vector support (z13).
There is no instruction emulation, since our ABI requires that all code
provide correct DWARF CFI at all PC locations in .eh_frame to support
unwinding (i.e. -fasynchronous-unwind-tables is on by default).
The implementation follows existing platforms in a mostly straightforward
manner. A couple of things that are different:
- We do not use PTRACE_PEEKUSER / PTRACE_POKEUSER to access single registers,
since some registers (access register) reside at offsets in the user area
that are multiples of 4, but the PTRACE_PEEKUSER interface only allows
accessing aligned 8-byte blocks in the user area. Instead, we use a s390
specific ptrace interface PTRACE_PEEKUSR_AREA / PTRACE_POKEUSR_AREA that
allows accessing a whole block of the user area in one go, so in effect
allowing to treat parts of the user area as register sets.
- SystemZ hardware does not provide any means to implement read watchpoints,
only write watchpoints. In fact, we can only support a *single* write
watchpoint (but this can span a range of arbitrary size). In LLDB this
means we support only a single watchpoint. I've set all test cases that
require read watchpoints (or multiple watchpoints) to expected failure
on the platform. [ Note that there were two test cases that install
a read/write watchpoint even though they nowhere rely on the "read"
property. I've changed those to simply use plain write watchpoints. ]
Differential Revision: http://reviews.llvm.org/D18978
llvm-svn: 266308
Build-id support is being added to lld and by default it may produce a
64-bit build-id.
Prior to this change lldb would reject such a build-id. However, it then
falls back to a 4-byte crc32, which is a poorer quality identifier.
Differential Revision: http://reviews.llvm.org/D18096
llvm-svn: 263432
Most address represented in lldb as section plus offset and handling of
absolute addresses is problematic in several location because of lack
of necessary information (e.g. Target) or because of performance issues.
This CL change the way ObjectFileELF handle the absolute symbols with
creating a pseudo section for each symbol. With this change all existing
code designed to work with addresses in the form of section plus offset
will work with absolute symbols as well.
Differential revision: http://reviews.llvm.org/D17450
llvm-svn: 261859
* Generate artificial symbol names from eh_fame during symbol parsing
so these symbols are already present when we calcualte the size of
the symbols where 0 is specified.
* Fix symbol size calculation for the last symbol in the file where
it have to last until the end of the parent section.
This is the re-commit of the original change after fixing some test
failures on OSX.
Differential revision: http://reviews.llvm.org/D16996
llvm-svn: 261205
the xcode project file to catch switch statements that have a
case that falls through unintentionally.
Define LLVM_FALLTHROUGH to indicate instances where a case has code
and intends to fall through. This should be in llvm/Support/Compiler.h;
Peter Collingbourne originally checked in there (r237766), then
reverted (r237941) because he didn't have time to mark up all the
'case' statements that were intended to fall through. I put together
a patch to get this back in llvm http://reviews.llvm.org/D17063 but
it hasn't been approved in the past week. I added a new
lldb-private-defines.h to hold the definition for now.
Every place in lldb where there is a comment that the fall-through
is intentional, I added LLVM_FALLTHROUGH to silence the warning.
I haven't tried to identify whether the fallthrough is a bug or
not in the other places.
I haven't tried to add this to the cmake option build flags.
This warning will only work for clang.
This build cleanly (with some new warnings) on macosx with clang
under xcodebuild, but if this causes problems for people on other
configurations, I'll back it out.
llvm-svn: 260930
Hafiz Abid Qadeer