When generic virtual registers get constrained, because of a use on a
target specific operation for instance, we end up with regular virtual
registers with a type and that's perfectly fine.
llvm-svn: 290376
This is going to be needed to be able to constraint register class on
target specific instruction while the RegBankSelect pass did not run
yet.
llvm-svn: 290375
Move the logic to constraint register from InstructionSelector to a
utility function. It will be required by other passes in the GlobalISel
pipeline.
llvm-svn: 290374
This is a succeeding patch of https://reviews.llvm.org/D22840 to address the
issue when a value to be merged into an int64 pair is in a different BB. Redoing
the store splitting in CodeGenPrepare so we can match the pattern across multiple
BBs and move some instructions into the same BB. We still keep the code in dag
combine so that we can catch cases that show up after DAG combining runs.
Differential Revision: https://reviews.llvm.org/D25914
llvm-svn: 290365
This is for splitMergedValStore in DAG Combine to share the target query interface
with similar logic in CodeGenPrepare.
Differential Revision: https://reviews.llvm.org/D24707
llvm-svn: 290363
When the pipeliner is renaming phi values, it may need to iterate through
the phi operands to check for other phis. However, the pipeliner should
stop once it reaches a phi that is outside the pipelined loop.
Also, when the generateExistingPhis code is unable to reuse an existing
phi, the default code that computes the PhiOp2 is only to be used when
the pipeliner is generating the kernel. Otherwise, the phi may be a value
computed earlier in the same epilog.
Patch by Brendon Cahoon.
llvm-svn: 290355
When DwarfExpression is emitting a fragment that is located in a
register and that fragment is smaller than the register, and the
register must be composed from sub-registers (are you still with me?)
the last DW_OP_piece operation must not be larger than the size of the
fragment itself, since the last piece of the fragment could be smaller
than the last subregister that is being emitted.
rdar://problem/29779065
llvm-svn: 290324
There are helpers for testing for constant or constant build_vector,
and for splat ConstantFP vectors, but not for a constantfp or
non-splat ConstantFP vector.
llvm-svn: 290317
The vectorcall calling convention specifies that arguments to functions are to be passed in registers, when possible.
vectorcall uses more registers for arguments than fastcall or the default x64 calling convention use.
The vectorcall calling convention is only supported in native code on x86 and x64 processors that include Streaming SIMD Extensions 2 (SSE2) and above.
The current implementation does not handle Homogeneous Vector Aggregates (HVAs) correctly and this review attempts to fix it.
This aubmit also includes additional lit tests to cover better HVAs corner cases.
Differential Revision: https://reviews.llvm.org/D27392
llvm-svn: 290240
we used to print UNKNOWN instructions when the instruction to be printer was not
yet inserted in any BB: in that case the pretty printer would not be able to
compute a TII as the instruction does not belong to any BB or function yet.
This patch explicitly passes the TII to the pretty-printer.
Differential Revision: https://reviews.llvm.org/D27645
llvm-svn: 290228
We're currently doing nearly the same thing for @llvm.objectsize in
three different places: two of them are missing checks for overflow,
and one of them could subtly break if InstCombine gets much smarter
about removing alloc sites. Seems like a good idea to not do that.
llvm-svn: 290214
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 290153
Summary:
MachineInstr::isIdenticalTo() is for some reason not
symmetric when comparing bundles, which gives us the
property:
I1->isIdenticalTo(*I2) != I2->isIdenticalTo(*I1)
when comparing bundles where one bundle is longer than
the other.
This patch makes sure that bundles of different length
always are considered as not being identical. Thus, the
result of the comparison will be the same regardless of
which side that happens to be to the left.
Reviewers: dexonsmith, jonpa, andrew.w.kaylor
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D27508
llvm-svn: 290095
The original version of the code in XRayInstrumentation.cpp assumed that
functions may not have empty machine basic blocks (or that the first one
couldn't be). This change addresses that by special-casing that specific
situation.
We provide two .mir test-cases to make sure we're handling this
appropriately.
Fixes llvm.org/PR31424.
Reviewers: chandlerc
Subscribers: varno, llvm-commits
Differential Revision: https://reviews.llvm.org/D27913
llvm-svn: 290091
Summary:
PseudoSourceValue can be used to attach a target specific value for "well behaved" side-effects lowered from target specific intrinsics.
This is useful whenever there is not an LLVM IR Value around when representing such "well behaved" side-effected operations in backends by attaching a MachineMemOperand with a custom PseudoSourceValue as this makes the scheduler not treating them as "GlobalMemoryObjects" which triggers a logic that makes the operation act like a barrier in the Schedule DAG.
This patch adds another Kind to the PseudoSourceValue object which is "TargetCustom". It indicates a type of PseudoSourceValue that has a target specific meaning (aka. LLVM shouldn't assume any specific usage for such a PSV).
It supports the possibility of having many different kinds of "TargetCustom" PseudoSourceValues.
We had a discussion about if this was valuable or not (in particular because there was a believe that PSV were going away sooner or later) but seems like they are not going anywhere and I think they are useful backend side.
It is not clear the interaction of this with MIRParser (do we need a target hook to parse these?) and I would like a comment from Alex about that :)
Reviewers: arphaman, hfinkel, arsenm
Subscribers: Eugene.Zelenko, llvm-commits
Patch By: Marcello Maggioni
Differential Revision: https://reviews.llvm.org/D13575
llvm-svn: 290037
This is recommit of r287553 after fixing the invalid loop info after eliminating an empty block and unit test failures in AVR and WebAssembly :
Summary: Merging an empty case block into the header block of switch could cause ISel to add COPY instructions in the header of switch, instead of the case block, if the case block is used as an incoming block of a PHI. This could potentially increase dynamic instructions, especially when the switch is in a loop. I added a test case which was reduced from the benchmark I was targetting.
Reviewers: t.p.northover, mcrosier, manmanren, wmi, joerg, davidxl
Subscribers: joerg, qcolombet, danielcdh, hfinkel, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22696
llvm-svn: 289988
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
llvm-svn: 289982
This is the 3rd of 3 patches to get reading and writing of
CodeView symbol and type records to use a single codepath.
Differential Revision: https://reviews.llvm.org/D26427
llvm-svn: 289978
`dropUnknownNonDebugMetadata` takes a list of "known" metadata IDs. The
only reason it worked at all is that `getMetadataID` returns something
unrelated -- it returns the subclass ID of the receiver (which is used
in `dyn_cast` etc.). That does not numerically match
`LLVMContext::MD_invariant_group` and ends up dropping `invariant_group`
along with every other metadata that does not numerically match
`LLVMContext::MD_invariant_group`.
llvm-svn: 289973
This is recommit of r287553 after fixing the invalid loop info after eliminating an empty block:
Summary: Merging an empty case block into the header block of switch could cause ISel to add COPY instructions in the header of switch, instead of the case block, if the case block is used as an incoming block of a PHI. This could potentially increase dynamic instructions, especially when the switch is in a loop. I added a test case which was reduced from the benchmark I was targetting.
Reviewers: t.p.northover, mcrosier, manmanren, wmi, joerg, davidxl
Subscribers: joerg, qcolombet, danielcdh, hfinkel, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22696
llvm-svn: 289951
Add the minimal support necessary to select a function that returns the sum of
two i32 values.
This includes some support for argument/return lowering of i32 values through
registers, as well as the handling of copy and add instructions throughout the
GlobalISel pipeline.
Differential Revision: https://reviews.llvm.org/D26677
llvm-svn: 289940
Summary:
This commits moves skipDebugInstructionsForward and
skipDebugInstructionsBackward from lib/CodeGen/IfConversion.cpp
to include/llvm/CodeGen/MachineBasicBlock.h and updates
some codgen files to use them.
This refactoring was suggested in https://reviews.llvm.org/D27688
and I thought it's best to do the refactoring in a separate
review, but I could also put both changes in a single review
if that's preferred.
Also, the names for the functions aren't the snappiest and
I would be happy to rename them if anybody has suggestions.
Reviewers: eli.friedman, iteratee, aprantl, MatzeB
Subscribers: MatzeB, llvm-commits
Differential Revision: https://reviews.llvm.org/D27782
llvm-svn: 289933
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289920
idiom.
r289538: Match load by bytes idiom and fold it into a single load
r289540: Fix a buildbot failure introduced by r289538
r289545: Use more detailed assertion messages in the code ...
r289646: Add a couple of assertions to the load combine code ...
This DAG combine has a bad crash in it that is quite hard to trigger
sadly -- it relies on sneaking code with UB through the SDAG build and
into this particular combine. I've responded to the original commit with
a test case that reproduces it.
However, the code also has other problems that will require substantial
changes to address and so I'm going ahead and reverting it for now. This
should unblock us and perhaps others that are hitting the crash in the
wild and will let a fresh patch with updated approach come in cleanly
afterward.
Sorry for any trouble or disruption!
llvm-svn: 289916
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289902
The IRTranslator uses an additional block before the LLVM-IR entry block
to perform all the ABI lowering and the constant hoisting. Thus, this
block is the actual entry block and it falls through the LLVM-IR entry
block. However, with such representation, we end up with two basic
blocks that are not maximal.
Therefore, this patch adds a bit of canonicalization by merging both the
LLVM-IR entry block and the ABI lowering/constants hoisting into one
block, making the resulting block more likely to be maximal (indeed the
LLVM-IR entry block might not have been maximal).
llvm-svn: 289891
The assert could potentially fire (though no cases have been
encountered), so just check that the instruction we're handling
specially for rematerialization only has one def to begin with.
Reviewed by Wei Mi over email.
llvm-svn: 289861
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.
Differential Revision: https://reviews.llvm.org/D27454
llvm-svn: 289820
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
Summary:
This fixes an issue with MachineBlockPlacement due to a badly timed call
to `analyzeBranch` with `AllowModify` set to true. The timeline is as
follows:
1. `MachineBlockPlacement::maybeTailDuplicateBlock` calls
`TailDup.shouldTailDuplicate` on its argument, which in turn calls
`analyzeBranch` with `AllowModify` set to true.
2. This `analyzeBranch` call edits the terminator sequence of the block
based on the physical layout of the machine function, turning an
unanalyzable non-fallthrough block to a unanalyzable fallthrough
block. Normally MBP bails out of rearranging such blocks, but this
block was unanalyzable non-fallthrough (and thus rearrangeable) the
first time MBP looked at it, and so it goes ahead and decides where
it should be placed in the function.
3. When placing this block MBP fails to analyze and thus update the
block in keeping with the new physical layout.
Concretely, before (1) we have something like:
```
LBL0:
< unknown terminator op that may branch to LBL1 >
jmp LBL1
LBL1:
... A
LBL2:
... B
```
In (2), analyze branch simplifies this to
```
LBL0:
< unknown terminator op that may branch to LBL2 >
;; jmp LBL1 <- redundant jump removed
LBL1:
... A
LBL2:
... B
```
In (3), MachineBlockPlacement goes ahead with its plan of putting LBL2
after the first block since that is profitable.
```
LBL0:
< unknown terminator op that may branch to LBL2 >
;; jmp LBL1 <- redundant jump
LBL2:
... B
LBL1:
... A
```
and the program now has incorrect behavior (we no longer fall-through
from `LBL0` to `LBL1`) because MBP can no longer edit LBL0.
There are several possible solutions, but I went with removing the teeth
off of the `analyzeBranch` calls in TailDuplicator. That makes thinking
about the result of these calls easier, and breaks nothing in the lit
test suite.
I've also added some bookkeeping to the MachineBlockPlacement pass and
used that to write an assert that would have caught this.
Reviewers: chandlerc, gberry, MatzeB, iteratee
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27783
llvm-svn: 289764
The original motivation for this patch comes from wanting to canonicalize
more IR to selects and also canonicalizing min/max.
If we're going to do that, we need more backend fixups to undo select codegen
when simpler ops will do. I chose AArch64 for the tests because that shows the
difference in the simplest way. This should fix:
https://llvm.org/bugs/show_bug.cgi?id=31175
Differential Revision: https://reviews.llvm.org/D27489
llvm-svn: 289738
Retrying after fixing after removing load-store factoring through
token factors in favor of improved token factor operand pruning
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289659
Generalize sdiv/udiv/srem/urem combines using APInt::isPowerOf2, which only works for const/splat-const values, to call SelectionDAG::isKnownToBeAPowerOfTwo instead which recognises many more cases.
Added a DAGCombiner::BuildLogBase2 helper since PowerOf2 combines often involve taking the log2 of such a value.
Differential Revision: https://reviews.llvm.org/D27714
llvm-svn: 289654
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
Follow-up to r289256, address a FIXME to avoid resetting the column
number. This reduced .debug_line by 2.6% in a RelWithDebInfo
self-build of clang.
llvm-svn: 289620
Summary:
This patch aims to generalize matching of the strided store accesses to more general masks.
The more general rule is to have consecutive accesses based on the stride:
[x, y, ... z, x+1, y+1, ...z+1, x+2, y+2, ...z+2, ...]
All elements in the masks need not form a contiguous space, there may be gaps.
As before, undefs are allowed and filled in with adjacent element loads.
Reviewers: HaoLiu, mssimpso
Subscribers: mkuper, delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D23646
llvm-svn: 289573
Match a pattern where a wide type scalar value is loaded by several narrow loads and combined by shifts and ors. Fold it into a single load or a load and a bswap if the targets supports it.
Assuming little endian target:
i8 *a = ...
i32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
=>
i32 val = *((i32)a)
i8 *a = ...
i32 val = (a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]
=>
i32 val = BSWAP(*((i32)a))
This optimization was discussed on llvm-dev some time ago in "Load combine pass" thread. We came to the conclusion that we want to do this transformation late in the pipeline because in presence of atomic loads load widening is irreversible transformation and it might hinder other optimizations.
Eventually we'd like to support folding patterns like this where the offset has a variable and a constant part:
i32 val = a[i] | (a[i + 1] << 8) | (a[i + 2] << 16) | (a[i + 3] << 24)
Matching the pattern above is easier at SelectionDAG level since address reassociation has already happened and the fact that the loads are adjacent is clear. Understanding that these loads are adjacent at IR level would have involved looking through geps/zexts/adds while looking at the addresses.
The general scheme is to match OR expressions by recursively calculating the origin of individual bits which constitute the resulting OR value. If all the OR bits come from memory verify that they are adjacent and match with little or big endian encoding of a wider value. If so and the load of the wider type (and bswap if needed) is allowed by the target generate a load and a bswap if needed.
Reviewed By: hfinkel, RKSimon, filcab
Differential Revision: https://reviews.llvm.org/D26149
llvm-svn: 289538
The general idea here is to get enough of the existing restrictions out of the way that the already existing folding logic in foldMemoryOperand can kick in for STATEPOINTs and fold references to immutable stack slots. The key changes are:
Support for folding multiple operands at once which reference the same load
Support for folding multiple loads into a single instruction
Walk all the operands of the instruction for varidic instructions (this is a bug fix!)
Once this lands, I'll post another patch which refactors the TII interface here. There's nothing actually x86 specific about the x86 code used here.
Differential Revision: https://reviews.llvm.org/D24103
llvm-svn: 289510
The stack slot reuse code had a really amusing bug. We ended up only reusing a stack slot exact once (initial use + reuse) within a basic block. If we had a third statepoint to process, we ended up allocating a new set of stack slots. If we crossed a basic block boundary, the set got cleared. As a result, code which is invoke heavy doesn't see the problem, but multiple calls within a basic block does. Net result: as we optimize invokes into calls, lowering gets worse.
The root error here is that the bitmap uses by the custom allocator wasn't kept in sync. The result was that we ended up resizing the bitmap on the next statepoint (to handle the cross block case), reset the bit once, but then never reset it again.
Differential Revision: https://reviews.llvm.org/D25243
llvm-svn: 289509
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. By default, use this for branch targets
and some other cases that have no specified source location, to
prevent inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Updated patch allows enabling or suppressing this behavior for all
unspecified source locations.
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 289468
We have found that -- when the selected subarchitecture has a scheduling model
and we are not optimizing for size -- the machine-instruction combiner uses a
too-simple algorithm to compute the cost of one of the two alternatives [before
and after running a combining pass on a section of code], and therefor it throws
away the combination results too often.
This fix has the potential to help any ISA with the potential to combine
instructions and for which at least one subarchitecture has a scheduling model.
As of now, this is only known to definitely affect AArch64 subarchitectures with
a scheduling model.
Regression tested on AMD64/GNU-Linux, new test case tested to fail on an
unpatched compiler and pass on a patched compiler.
Patch by Abe Skolnik and Sebastian Pop.
llvm-svn: 289399
LLVM's use of DW_OP_bit_piece is incorrect and a based on a
misunderstanding of the wording in the DWARF specification. The offset
argument of DW_OP_bit_piece refers to the offset into the location
that is on the top of the DWARF expression stack, and not an offset
into the source variable. This has since also been clarified in the
DWARF specification.
This patch fixes all uses of DW_OP_bit_piece to emit the correct
offset and simplifies the DwarfExpression class to semi-automaticaly
emit empty DW_OP_pieces to adjust the offset of the source variable,
thus simplifying the code using DwarfExpression.
While this is an incompatible bugfix, in practice I don't expect this
to be much of a problem since LLVM's old interpretation and the
correct interpretation of DW_OP_bit_piece differ only when there are
gaps in the fragmented locations of the described variables or if
individual fragments are smaller than a byte. LLDB at least won't
interpret locations with gaps in them because is has no way to present
undefined bits in a variable, and there is a high probability that an
old-form expression will be malformed when interpreted correctly,
because the DW_OP_bit_piece offset will be outside of the location at
the top of the stack.
As a nice side-effect, this patch enables us to use a more efficient
encoding for subregisters: In order to express a sub-register at a
non-zero offset we now use a DW_OP_bit_piece instead of shifting the
value into place manually.
This patch also adds missing test coverage for code paths that weren't
exercised before.
<rdar://problem/29335809>
Differential Revision: https://reviews.llvm.org/D27550
llvm-svn: 289266
Like DBG_VALUE, these emit nothing to the .text section, and sometimes
have no source location specified. Just ignore them.
Differential Revision: http://reviews.llvm.org/D27492
llvm-svn: 289256
Reapplied with fix for PR31323 - X86 SSE2 vXi16 multiplies for illegal types were creating CONCAT_VECTORS nodes with vector inputs that might not total the number of elements in the result type.
llvm-svn: 289232
Retrying after fixing overly aggressive load-store forwarding optimization.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289221
Part of the work for PR31323 - add extra asserts checking that the input vectors are of consistent type and result in the correct number of vector elements.
llvm-svn: 289214
Adds support for bitcasting a little endian 'small element' vector to 'large element' scalar/vector (e.g. v16i8 to v4i32 or v2i32 to i64), which is required for PR30845. We extract the knownbits for each 'small element' part and concatenate the results together.
We can add support for big endian and 'large element' scalar/vector to 'small element' vector bitcasting once we have test cases for them.
Differential Revision: https://reviews.llvm.org/D27129
llvm-svn: 289200
This reverts commit r288916 as it is currently causing a crasher in
Halide. Reproducer on llvm.org/PR31323. While it might be that halide is
generating invalid IR, llc shouldn't crash.
llvm-svn: 289194
Supporting them properly is a reasonably complex chunk of work, so to allow bot
testing before then we should at least be able to fall back to DAG ISel.
llvm-svn: 289150
We were falsely claiming that we had an LSDA for the relevant EH
personality before this change, which could lead to the EH machinery
interpreting random adjacent data as an LSDA.
Fixes PR31317
This change is safe because cleanups can't contain exception handlers
today. We do these things to maintain that invariant:
- C++ destructors are naturally out-of-line
- __finally blocks are outlined in clang
- LLVM's inliner will not inline EH constructs into cleanups
llvm-svn: 289101
Summary:
Most targets set the action for these nodes to Expand even though there
isn't actually any code for them in ExpandNode. Instead, targets simply
relied on the fact that no code generates these nodes as long as the
nodes aren't legal or custom.
However, generating these nodes can be useful e.g. for divide-by-constant
in wider integer types.
Expand of [US]MUL_LOHI will use MULH[US] when legal or custom, and
a sequence of half-width multiplications otherwise. Promote uses a wider
multiply.
This patch intends to not change the generated code, but indirect effects
are possible since expansions/promotions that were previously done in
DAGCombine may now be done in LegalizeDAG.
See D24822 for a change that actually uses the new expansion.
Reviewers: spatel, bkramer, venkatra, efriedma, hfinkel, ast, nadav, tstellarAMD
Subscribers: arsenm, jyknight, nemanjai, wdng, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D24956
llvm-svn: 289050
So far it creates a test helper and so it should be moved there. It also
create a layering cycle between CodeGen and CodeGen/AsmPrinter, which
should be avoided.
Review: https://reviews.llvm.org/D27570
llvm-svn: 289044
The relocations for `DIEEntry::EmitValue` were wrong for Win64
(emitting FK_Data_4 instead of FK_SecRel_4). This corrects that
oversight so that the DWARF data is correct in Win64 COFF files.
Fixes PR15393.
Patch by Jameson Nash <jameson@juliacomputing.com> based on a patch
by David Majnemer.
Differential Revision: https://reviews.llvm.org/D21731
llvm-svn: 289013
The only tests we have for the DWARF parser are the tests that use llvm-dwarfdump and expect output from textual dumps.
More DWARF parser modification are coming in the next few weeks and I wanted to add tests that can verify that we can encode and decode all form types, as well as test some other basic DWARF APIs where we ask DIE objects for their children and siblings.
DwarfGenerator.cpp was added in the lib/CodeGen directory. This file contains the code necessary to easily create DWARF for tests:
dwarfgen::Generator DG;
Triple Triple("x86_64--");
bool success = DG.init(Triple, Version);
if (!success)
return;
dwarfgen::CompileUnit &CU = DG.addCompileUnit();
dwarfgen::DIE CUDie = CU.getUnitDIE();
CUDie.addAttribute(DW_AT_name, DW_FORM_strp, "/tmp/main.c");
CUDie.addAttribute(DW_AT_language, DW_FORM_data2, DW_LANG_C);
dwarfgen::DIE SubprogramDie = CUDie.addChild(DW_TAG_subprogram);
SubprogramDie.addAttribute(DW_AT_name, DW_FORM_strp, "main");
SubprogramDie.addAttribute(DW_AT_low_pc, DW_FORM_addr, 0x1000U);
SubprogramDie.addAttribute(DW_AT_high_pc, DW_FORM_addr, 0x2000U);
dwarfgen::DIE IntDie = CUDie.addChild(DW_TAG_base_type);
IntDie.addAttribute(DW_AT_name, DW_FORM_strp, "int");
IntDie.addAttribute(DW_AT_encoding, DW_FORM_data1, DW_ATE_signed);
IntDie.addAttribute(DW_AT_byte_size, DW_FORM_data1, 4);
dwarfgen::DIE ArgcDie = SubprogramDie.addChild(DW_TAG_formal_parameter);
ArgcDie.addAttribute(DW_AT_name, DW_FORM_strp, "argc");
// ArgcDie.addAttribute(DW_AT_type, DW_FORM_ref4, IntDie);
ArgcDie.addAttribute(DW_AT_type, DW_FORM_ref_addr, IntDie);
StringRef FileBytes = DG.generate();
MemoryBufferRef FileBuffer(FileBytes, "dwarf");
auto Obj = object::ObjectFile::createObjectFile(FileBuffer);
EXPECT_TRUE((bool)Obj);
DWARFContextInMemory DwarfContext(*Obj.get());
This code is backed by the AsmPrinter code that emits DWARF for the actual compiler.
While adding unit tests it was discovered that DIEValue that used DIEEntry as their values had bugs where DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref8, and DW_FORM_ref_udata forms were not supported. These are all now supported. Added support for DW_FORM_string so we can emit inlined C strings.
Centralized the code to unique abbreviations into a new DIEAbbrevSet class and made both the dwarfgen::Generator and the llvm::DwarfFile classes use the new class.
Fixed comments in the llvm::DIE class so that the Offset is known to be the compile/type unit offset.
DIEInteger now supports more DW_FORM values.
There are also unit tests that cover:
Encoding and decoding all form types and values
Encoding and decoding all reference types (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata, DW_FORM_ref_addr) including cross compile unit references with that go forward one compile unit and backward on compile unit.
Differential Revision: https://reviews.llvm.org/D27326
llvm-svn: 289010
ConstantExpr instances were emitting code into the current block rather than
the entry block. This meant they didn't necessarily dominate all uses, which is
clearly wrong.
llvm-svn: 288985
Having to ask the MIRBuilder for the current function is a little awkward, and
I'm intending to improve how that's threaded through anyway.
llvm-svn: 288983
Quentin Colombet