See https://reviews.llvm.org/D6678 for the history of
isExtractSubvectorCheap. Essentially the same considerations apply
to ARM.
This temporarily breaks the formation of vpadd/vpaddl in certain cases;
AddCombineToVPADDL essentially assumes that we won't form VUZP shuffles.
See https://reviews.llvm.org/D27779 for followup fix.
Differential Revision: https://reviews.llvm.org/D27774
llvm-svn: 290198
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Recommiting with fix to avoid forming vld1dup if the type of the load
doesn't match the type of the vdup (see
https://llvm.org/bugs/show_bug.cgi?id=31404).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289972
Add two public methods to ARMTargetLowering: CCAssignFnForCall and
CCAssignFnForReturn, which are just calling the already existing private method
CCAssignFnForNode. These will come in handy for GlobalISel on ARM.
We also replace all calls to CCAssignFnForNode in ARMISelLowering.cpp, because
the new methods are friendlier to the reader.
llvm-svn: 289932
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289703
This patch assigns cost of the scaling used in addressing.
On many ARM cores, a negated register offset takes longer than a
non-negated register offset, in a register-offset addressing mode.
For instance:
LDR R0, [R1, R2 LSL #2]
LDR R0, [R1, -R2 LSL #2]
Above, (1) takes less cycles than (2).
By assigning appropriate scaling factor cost, we enable the LLVM
to make the right trade-offs in the optimization and code-selection phase.
Differential Revision: http://reviews.llvm.org/D24857
Reviewers: jmolloy, rengolin
llvm-svn: 284127
Move the target specific setup into the target specific lowering setup. As
pointed out by Anton, the initial change was moving this too high up the stack
resulting in a violation of the layering (the target generic code path setup
target specific bits). Sink this into the ARM specific setup. NFC.
llvm-svn: 281088
At higher optimization levels, we generate the libcall for DIVREM_Ix, which is
fine: aeabi_{u|i}divmod. At -O0 we generate the one for REM_Ix, which is the
default {u}mod{q|h|s|d}i3.
This commit makes sure that we don't generate REM_Ix calls for ABIs that
don't support them (i.e. where we need to use DIVREM_Ix instead). This is
achieved by bailing out of FastISel, which can't handle non-double multi-reg
returns, and letting the legalization infrastructure expand the REM_Ix calls.
It also updates the divmod-eabi.ll test to run under -O0 as well, and adds some
Windows checks to it to make sure we don't break things for it.
Fixes PR27068
Differential Revision: https://reviews.llvm.org/D21926
llvm-svn: 275773
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
Summary:
SSAT saturates an integer, making sure that its value lies within
an interval [-k, k]. Since the constant is given to SSAT as the
number of bytes set to one, k + 1 must be a power of 2, otherwise
the optimization is not possible. Also, the select_cc must use <
and > respectively so that they define an interval.
Reviewers: mcrosier, jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21372
llvm-svn: 273581
TargetLowering and DAGToDAG are used to combine ADDC, ADDE and UMLAL
dags into UMAAL. Selection is split into the two phases because it
is easier to match the two patterns at those different times.
Differential Revision: http://http://reviews.llvm.org/D21461
llvm-svn: 273165
Reduces a bit of code duplication and clarify where we are interested
just on position independence and no the location of the symbol.
llvm-svn: 273164
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
I'm really not sure why we were in the first place, it's the linker's job to
convert between BL/BLX as necessary. Even worse, using BLX left Thumb calls
that could be locally resolved completely unencodable since all offsets to BLX
are multiples of 4.
rdar://26182344
llvm-svn: 269101
Summary:
This patch adds support for the X asm constraint.
To do this, we lower the constraint to either a "w" or "r" constraint
depending on the operand type (both constraints are supported on ARM).
Fixes PR26493
Reviewers: t.p.northover, echristo, rengolin
Subscribers: joker.eph, jgreenhalgh, aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D19061
llvm-svn: 267411
This introduces a custom lowering for ISD::SETCCE (introduced in r253572)
that allows us to emit a short code sequence for 64-bit compares.
Before:
push {r7, lr}
cmp r0, r2
mov.w r0, #0
mov.w r12, #0
it hs
movhs r0, #1
cmp r1, r3
it ge
movge.w r12, #1
it eq
moveq r12, r0
cmp.w r12, #0
bne .LBB1_2
@ BB#1: @ %bb1
bl f
pop {r7, pc}
.LBB1_2: @ %bb2
bl g
pop {r7, pc}
After:
push {r7, lr}
subs r0, r0, r2
sbcs.w r0, r1, r3
bge .LBB1_2
@ BB#1: @ %bb1
bl f
pop {r7, pc}
.LBB1_2: @ %bb2
bl g
pop {r7, pc}
Saves around 80KB in Chromium's libchrome.so.
Some notes on this patch:
- I don't much like the ARMISD::BRCOND and ARMISD::CMOV combines I
introduced (nothing else needs them). However, they are necessary in
order to avoid poor codegen, and they seem similar to existing combines
in other backends (e.g. X86 combines (brcond (cmp (setcc Compare))) to
(brcond Compare)).
- No support for Thumb-1. This is in principle possible, but we'd need
to implement ARMISD::SUBE for Thumb-1.
Differential Revision: http://reviews.llvm.org/D15256
llvm-svn: 263962
- Rename getATOMIC to getSYNC, as llvm will soon be able to emit both
'__sync' libcalls and '__atomic' libcalls, and this function is for
the '__sync' ones.
- getInsertFencesForAtomic() has been replaced with
shouldInsertFencesForAtomic(Instruction), so that the decision can be
made per-instruction. This functionality will be used soon.
- emitLeadingFence/emitTrailingFence are no longer called if
shouldInsertFencesForAtomic returns false, and thus don't need to
check the condition themselves.
llvm-svn: 263665
Add support for TLS access for Windows on ARM. This generates a similar access
to MSVC for ARM.
The changes to the tablegen data is needed to support loading an external symbol
global that is not for a call. The adjustments to the DAG to DAG transforms are
needed to preserve the 32-bit move.
llvm-svn: 259676
Darwin TLS accesses most closely resemble ELF's general-dynamic situation,
since they have to be able to handle all possible situations. The descriptors
and so on are obviously slightly different though.
llvm-svn: 257039
Building on r253865 the crash is not limited to signed overflows.
Disable custom handling of unsigned 32-bit and 64-bit integer divide.
Add test cases for both 32-bit and 64-bit unsigned integer overflow.
llvm-svn: 254158
Disable custom handling of signed 32-bit and 64-bit integer divide.
Add test cases for both 32-bit and 64-bit integer overflow crashes.
llvm-svn: 253865
ARM V6T2 has instructions for efficient count-leading/trailing-zeros, so this should be
considered a cheap operation (and therefore fair game for speculation) for any ARM V6T2
implementation.
The net result of allowing this speculation for the regression tests in this patch is
that we get this code:
ctlz:
clz r0, r0
bx lr
cttz:
rbit r0, r0
clz r0, r0
bx lr
Instead of:
ctlz:
cmp r0, #0
moveq r0, #32
clzne r0, r0
bx lr
cttz:
cmp r0, #0
moveq r0, #32
rbitne r0, r0
clzne r0, r0
bx lr
This will help solve a general speculation/despeculation problem noted in PR24818:
https://llvm.org/bugs/show_bug.cgi?id=24818
Differential Revision: http://reviews.llvm.org/D14469
llvm-svn: 252639
Added fixes for stage2 failures: CMOV is not commutable; commuting the operands results in the condition being flipped! d'oh!
Original commit message:
If we have a CMOV, OR and AND combination such as:
if (x & CN)
y |= CM;
And:
* CN is a single bit;
* All bits covered by CM are known zero in y;
Then we can convert this to a sequence of BFI instructions. This will always be a win if CM is a single bit, will always be no worse than the TST & OR sequence if CM is two bits, and for thumb will be no worse if CM is three bits (due to the extra IT instruction).
llvm-svn: 252606
Summary:
The CLR's personality routine passes these in rdx/edx, not rax/eax.
Make getExceptionPointerRegister a virtual method parameterized by
personality function to allow making this distinction.
Similarly make getExceptionSelectorRegister a virtual method parameterized
by personality function, for symmetry.
Reviewers: pgavlin, majnemer, rnk
Subscribers: jyknight, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14344
llvm-svn: 252383
If we have a CMOV, OR and AND combination such as:
if (x & CN)
y |= CM;
And:
* CN is a single bit;
* All bits covered by CM are known zero in y;
Then we can convert this to a sequence of BFI instructions. This will always be a win if CM is a single bit, will always be no worse than the TST & OR sequence if CM is two bits, and for thumb will be no worse if CM is three bits (due to the extra IT instruction).
llvm-svn: 252057
In PIC mode we were previously computing global variable addresses (or GOT
entry addresses) by adding the PC, the PC-relative GOT displacement and
the GOT-relative symbol/GOT entry displacement. Because the latter two
displacements are fixed, we ended up performing one more addition than
necessary.
This change causes us to compute addresses using a single PC-relative
displacement, resulting in a shorter code sequence. This reduces code size
by about 4% in a recent build of Chromium for Android.
As a result of this change we no longer need to compute the GOT base address
in the ARM backend, which allows us to remove the Global Base Reg pass and
SDAG lowering for the GOT.
We also now no longer use the GOT when addressing a symbol which is known
to be defined in the same linkage unit. Specifically, the symbol must have
either hidden visibility or a strong definition in the current module in
order to not use the the GOT.
This is a change from the previous behaviour where we would use the GOT to
address externally visible symbols defined in the same module. I think the
only cases where this could matter are cases involving symbol interposition,
but we don't really support that well anyway.
Differential Revision: http://reviews.llvm.org/D13650
llvm-svn: 251322
We were previously codegen'ing memcpy as regular load/store operations and
hoping that the register allocator would allocate registers in ascending order
so that we could apply an LDM/STM combine after register allocation. According
to the commit that first introduced this code (r37179), we planned to teach the
register allocator to allocate the registers in ascending order. This never got
implemented, and up to now we've been stuck with very poor codegen.
A much simpler approach for achieving better codegen is to create MEMCPY pseudo
instructions, attach scratch virtual registers to them and then, post register
allocation, expand the MEMCPYs into LDM/STM pairs using the scratch registers.
The register allocator will have picked arbitrary registers which we sort when
expanding the MEMCPY. This approach also avoids the need to repeatedly calculate
offsets which ultimately ought to be eliminated pre-RA in order to decrease
register pressure.
Fixes PR9199 and PR23768.
[This is based on Peter Collingbourne's r238473 which was reverted.]
Differential Revision: http://reviews.llvm.org/D13239
Change-Id: I727543c2e94136e0f80b8e22d5642d7b9ee5b458
Author: Peter Collingbourne <peter@pcc.me.uk>
llvm-svn: 249322
We now emit the compiler generated divide by zero check that was needed for the
MSVC routines. We construct a psuedo-instruction for the DBZ check as the
operation requires splitting up the BB. For the 64-bit operations, we need to
custom expand the node as we need to insert the DBZ check and then emit the
libcall to the appropriate name. Because this is target specific, it seemed
better to reproduce the expansion operation from the target-agnostic type
legalization rather than sink this there to avoid the duplication. The division
library calls now match MSVC semantically.
llvm-svn: 248561
ARM counterpart to r248291:
In the comparison failure block of a cmpxchg expansion, the initial
ldrex/ldxr will not be followed by a matching strex/stxr.
On ARM/AArch64, this unnecessarily ties up the execution monitor,
which might have a negative performance impact on some uarchs.
Instead, release the monitor in the failure block.
The clrex instruction was designed for this: use it.
Also see ARMARM v8-A B2.10.2:
"Exclusive access instructions and Shareable memory locations".
Differential Revision: http://reviews.llvm.org/D13033
llvm-svn: 248294
We used to have this magic "hasLoadLinkedStoreConditional()" callback,
which really meant two things:
- expand cmpxchg (to ll/sc).
- expand atomic loads using ll/sc (rather than cmpxchg).
Remove it, and, instead, introduce explicit callbacks:
- bool shouldExpandAtomicCmpXchgInIR(inst)
- AtomicExpansionKind shouldExpandAtomicLoadInIR(inst)
Differential Revision: http://reviews.llvm.org/D12557
llvm-svn: 247429
llvm.eh.sjlj.setjmp was used as part of the SjLj exception handling
style but is also used in clang to implement __builtin_setjmp. The ARM
backend needs to output additional dispatch tables for the SjLj
exception handling style, these tables however can't be emitted if
llvm.eh.sjlj.setjmp is simply used for __builtin_setjmp and no actual
landing pad blocks exist.
To solve this issue a new llvm.eh.sjlj.setup_dispatch intrinsic is
introduced which is used instead of llvm.eh.sjlj.setjmp in the SjLj
exception handling lowering, so we can differentiate between the case
where we actually need to setup a dispatch table and the case where we
just need the __builtin_setjmp semantic.
Differential Revision: http://reviews.llvm.org/D9313
llvm-svn: 242481
This patch allows the read_register and write_register intrinsics to
read/write the RBP/EBP registers on X86 iff the targeted register is
the frame pointer for the containing function.
Differential Revision: http://reviews.llvm.org/D10977
llvm-svn: 241827
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11040
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241778
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241775
There is some functional change here because it changes target code from
atoi(3) to StringRef::getAsInteger which has error checking. For valid
constraints there should be no difference.
llvm-svn: 241411
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
Eugene Zelenko