This allows the DWARFExpression class to handle addresses without
crashing on targets with 16-bit pointers like AVR.
This is required in order to generate assembly from clang via the '-S'
flag.
This fixes an error with the following message:
clang: llvm/include/llvm/DebugInfo/DWARF/DWARFExpression.h:132: llvm::DWARFExpression::DWARFExpression(llvm::DataExtractor, uint16_t, uint8_t):
Assertion `AddressSize == 8 || AddressSize == 4' failed.
llvm-svn: 362290
CodeView has its own register map which is defined in cvconst.h. Missing this
mapping before saving register to CodeView causes debugger to show incorrect
value for all register based variables, like variables in register and local
variables addressed by register (stack pointer + offset).
This change added mapping between LLVM register and CodeView register so the
correct register number will be stored to CodeView/PDB, it aso fixed the
mapping from CodeView register number to register name based on current
CPUType but print PDB to yaml still assumes X86 CPU and needs to be fixed.
Differential Revision: https://reviews.llvm.org/D62608
llvm-svn: 362280
This lead to errors when dumping binaries with v4 and v5 units linked
together (but could've also errored on v5 units that did/didn't use
str_offsets).
Also improves error handling and messages around invalid str_offsets
contributions.
llvm-svn: 361683
This adds `-parent-recurse-depth` which limits the number of parent DIEs
being dumped.
Differential revision: https://reviews.llvm.org/D62359
llvm-svn: 361671
This test case was incorrect because it mixed DWARF32 and DWARF64 for a
single unit (DWARF32 unit referencing a DWARF64 str_offsets section). So
fix enough of the unit parsing for DWARF64 and make the test valid.
(not sure if anyone needs DWARF64 support though - support in
libDebugInfoDWARF has been added piecemeal and LLVM doesn't produce it
at all)
llvm-svn: 361582
Summary:
This was flagged in https://www.viva64.com/en/b/0629/ under "Snippet No.
15" (see under #13). It looks like PVS studio flags nullptr checks where
the ptr is used inbetween creation and checking against nullptr.
Reviewers: JDevlieghere, probinson
Reviewed By: JDevlieghere
Subscribers: RKSimon, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62118
llvm-svn: 361176
r360876 didn't fix 2 call sites in clang.
Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
Follow-up of D61781.
llvm-svn: 360892
It broke the Clang build, see llvm-commits thread.
> Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
>
> Follow-up of D61781.
llvm-svn: 360878
Follow up to r359122, after a bug was reported in it - the original
change too aggressively tried to move related types out of type units,
which included unnamed types (like array types) which can't reasonably
be declared-but-not-defined.
A step beyond that is that some types in type units can be anonymous, if
they are types with a name for linkage purposes (eg: "typedef struct { }
x;"). So ensure those don't get turned into plain declarations (without
signatures) because, lacking names, they can't be resolved to the
definition.
[Also include a fix for llvm-dwarfdump/libDebugInfoDWARF to pretty print
types in type units]
llvm-svn: 360458
Summary:
Prior to DWARF v5, a directory index of 0 represents DW_AT_comp_dir.
In DWARF v5, the index starts with 0 and Entry.DirIdx is the index into
Prologue.IncludeDirectories.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D61253
llvm-svn: 360015
lld-link used to write PDB files that DIA couldn't recover natvis
files from if:
- The global strings table was > 64kiB
- There were at least 3 natvis files
The cause was that the hash function for the /src/headerblock stream
was incorrect: It needs to be truncated to 16 bit.
If the global strings table was <= 64kiB, truncating to 16 bit is a
no-op, so this wasn't needed for small programs.
If there are only 1 or 2 natvis files, then the growth strategy in
HashTable::grow() would mean the hash table would have 2 buckets (for 1
natvis file) or 4 buckets (for 4 natvis files), and since the hash
function is used modulo number of buckets, and since 2 and 4 divide
0x10000, the missing `% 0x10000` is a no-op there too. For 3 natvis
files, the hash table grows to 6 buckets, which has a factor that's not
common with 0x10000 and the difference starts to matter.
Fixes PR41626.
Differential Revision: https://reviews.llvm.org/D61277
llvm-svn: 359515
This is very minor issue. The returned section index is only used by
DWARFDebugLine as an llvm::upper_bound input and the use case shouldn't
cause any behavioral change.
llvm-svn: 358814
Another attempt to land the changes in debug line header to prevent duplicate
files in Dwarf 5. I rolled back my previous commit because of a mistake in
generating the object file in a test. Meanwhile, I addressed some offline
comments and changed the implementation; the largest difference is that
MCDwarfLineTableHeader does not keep DwarfVersion but gets it as a parameter. I
also merged the patch to fix two lld tests that will strt to fail into this
patch.
Original Commit:
https://reviews.llvm.org/D59515
Original Message:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf
5) However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
llvm-svn: 358732
It didn't handle empty LHS correctly. If two ranges of LHS were
contiguous and jointly contained one range of RHS, it could also be incorrect.
DWARFAddressRange::contains can be removed and its tests can be merged into DWARFVerifier::DieRangeInfo::contains
llvm-svn: 358387
Summary:
Make DW_LNS_copy set the discriminator register to 0, to conform to
DWARF 4 & 5: "Then it sets the discriminator register to 0, and sets the
basic_block, prologue_end and epilogue_begin registers to false."
Because all of DW_LNE_end_sequence, DN_LNS_copy, and special opcodes reset
discriminator to 0, we can move discriminator=0 to appendRowToMatrix.
Also, make DW_LNS_copy print before appending the row, as it is similar
to a address+=0,line+=0 special opcode, which prints before appending
the row.
Reviewers: dblaikie, probinson, aprantl
Reviewed By: dblaikie
Subscribers: danielcdh, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60364
llvm-svn: 358148
We want the last row whose address is less than or equal to Address.
This can be computed as upper_bound - 1, which is simpler than
lower_bound followed by skipping equal rows in a loop.
Since FirstRow (LowPC) does not satisfy the predicate (OrderByAddress)
while LastRow-1 (HighPC) satisfies the predicate. We can decrease the
search range by two, i.e.
upper_bound [FirstRow,LastRow) = upper_bound [FirstRow+1,LastRow-1)
llvm-svn: 358053
In a sorted list of non-overlapping [LowPC,HighPC) ranges, locating an address with
upper_bound on HighPC is simpler than lower_bound on LowPC.
llvm-svn: 358012
The current lower_bound approach has to check two iterators pos and pos-1.
Changing it to upper_bound allows us to check one iterator (similar to
DWARFUnitVector::getUnitFor*).
llvm-svn: 357834
In general, llvm-symbolizer follows the output style of GNU's addr2line.
However, there are still some differences; in particular, for a requested
address, llvm-symbolizer prints line and column, while addr2line prints
only the line number.
This patch adds a new switch to select the preferred style.
Differential Revision: https://reviews.llvm.org/D60190
llvm-svn: 357675
Summary:
Now CVType and CVSymbol are effectively type-safe wrappers around
ArrayRef<uint8_t>. Make the kind() accessor load it from the
RecordPrefix, which is the same for types and symbols.
Reviewers: zturner, aganea
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60018
llvm-svn: 357658
The standard doesn't require a DW_TAG_variable, DW_TAG_formal_parameter
or DW_TAG_constant to A DW_AT_type attribute describing the type of the
variable. It only specifies that it *can* have one.
llvm-svn: 357628
Dylan McKay