This is a fix for r339314.
MCInstBuilder uses the named parameter idiom and an 'operator MCInst&' to ease
the creation of MCInsts. As the object of MCInstBuilder owns the MCInst is
manipulating, the lifetime of the MCInst is bound to that of MCInstBuilder.
In r339314 I bound a reference to the MCInst in an initializer. The
temporary of MCInstBuilder (and also its MCInst) is destroyed at the end of
the declaration leading to a dangling reference.
Fix this by using MCInstBuilder inside an argument of a function call.
Temporaries in function calls are destroyed in the enclosing full expression,
so the the reference to MCInst is still valid when emitToStreamer executes.
llvm-svn: 339654
This pseudo-instruction is similar to la but uses PC-relative addressing
unconditionally. This is, la is only different to lla when using -fPIC. This
pseudo-instruction seems often forgotten in several specs but it is definitely
mentioned in binutils opcodes/riscv-opc.c. The semantics are defined both in
page 37 of the "RISC-V Reader" book but also in function macro found in
gas/config/tc-riscv.c.
This is a very first step towards adding PIC support for Linux in the RISC-V
backend.
The lla pseudo-instruction expands to a sequence of auipc + addi with a couple
of pc-rel relocations where the second points to the first one. This is
described in
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#pc-relative-symbol-addresses
For now, this patch only introduces support of that pseudo instruction at the
assembler parser.
Differential Revision: https://reviews.llvm.org/D49661
llvm-svn: 339314
Match the GNU assembler in supporting immediate operands for these
instructions even when the reg-reg mnemonic is used.
Differential Revision: https://reviews.llvm.org/D50046
Patch by Kito Cheng.
llvm-svn: 339252
- Save/restore only registers that are used.
This includes Callee saved registers and Caller saved registers
(arguments and temporaries) for integer and FP registers.
- If there is a call in the interrupt handler, save/restore all
Caller saved registers (arguments and temporaries) and all FP registers.
- Emit special return instructions depending on "interrupt"
attribute type.
Based on initial patch by Zhaoshi Zheng.
Reviewers: asb
Reviewed By: asb
Subscribers: rkruppe, the_o, MartinMosbeck, brucehoult, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D48411
llvm-svn: 338047
Summary:
In r333455 we added a peephole to fix the corner cases that result
from separating base + offset lowering of global address.The
peephole didn't handle some of the cases because it only has a basic
block view instead of a function level view.
This patch replaces that logic with a machine function pass. In
addition to handling the original cases it handles uses of the global
address across blocks in function and folding an offset from LW\SW
instruction. This pass won't run for OptNone compilation, so there
will be a negative impact overall vs the old approach at O0.
Reviewers: asb, apazos, mgrang
Reviewed By: asb
Subscribers: MartinMosbeck, brucehoult, the_o, rogfer01, mgorny, rbar, johnrusso, simoncook, niosHD, kito-cheng, shiva0217, zzheng, llvm-commits, edward-jones
Differential Revision: https://reviews.llvm.org/D47857
llvm-svn: 335786
Summary:
When expanding the PseudoTail in expandFunctionCall() we were using X6
to save the return address. Since this is a tail call the return
address is not needed, this patch replaces it with X0 to be ignored.
This matches the behaviour listed in the ISA V2.2 document page 110.
tail offset -----> jalr x0, x6, offset
GCC exhibits the same behavior.
Reviewers: apazos, asb, mgrang
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01
Differential Revision: https://reviews.llvm.org/D48343
llvm-svn: 335239
These instructions were renamed in version 2.2 of the user-level ISA spec, but
the old name should also be accepted by standard tools.
llvm-svn: 335154
These are produced by GCC and supported by GAS, but not currently contained in
the pseudoinstruction listing in the RISC-V ISA manual.
llvm-svn: 335127
These are produced by GCC and supported by GAS, but not currently contained in
the pseudoinstruction listing in the RISC-V ISA manual.
llvm-svn: 335120
Fences are inserted according to table A.6 in the current draft of version 2.3
of the RISC-V Instruction Set Manual, which incorporates the memory model
changes and definitions contributed by the RISC-V Memory Consistency Model
task group.
Instruction selection failures will now occur for 8/16/32-bit atomicrmw and
cmpxchg operations when targeting RV32IA until lowering for these operations
is added in a follow-on patch.
Differential Revision: https://reviews.llvm.org/D47589
llvm-svn: 334591
This patch adds lowering for atomic fences and relies on AtomicExpandPass to
lower atomic loads/stores, atomic rmw, and cmpxchg to __atomic_* libcalls.
test/CodeGen/RISCV/atomic-* are modelled on the exhaustive
test/CodeGen/PPC/atomics-regression.ll, and will prove more useful once RV32A
codegen support is introduced.
Fence mappings are taken from table A.6 in the current draft of version 2.3 of
the RISC-V Instruction Set Manual, which incorporates the memory model changes
and definitions contributed by the RISC-V Memory Consistency Model task group.
Differential Revision: https://reviews.llvm.org/D47587
llvm-svn: 334590
The instruction makes use of a previously ignored field in the fence
instruction. It is introduced in the version 2.3 draft of the RISC-V
specification after much work by the Memory Model Task Group.
As clarified here <https://github.com/riscv/riscv-isa-manual/issues/186>,
the fence.tso assembler mnemonic does not have operands.
llvm-svn: 334278
The implementation follows the MIPS backend and expands the pseudo instruction
directly during asm parsing. As the result, only real MC instructions are
emitted to the MCStreamer. The actual expansion to real instructions is
similar to the expansion performed by the GNU Assembler.
This patch supersedes D41949.
Differential Revision: https://reviews.llvm.org/D46118
Patch by Mario Werner.
llvm-svn: 334203
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
Resolving fixup_riscv_call by assembler when the linker relaxation diabled
and the function and callsite within the same compile unit.
And also adding static_assert after Infos array declaration
to avoid missing any new fixup in MCFixupKindInfo in the future.
Differential Revision: https://reviews.llvm.org/D47126
llvm-svn: 333487
Summary:
Base and offset are always separated when a GlobalAddress node is lowered
(rL332641) as an optimization to reduce instruction count. However, this
optimization is not profitable if the Global Address ends up being used in only
instruction.
This patch adds peephole optimizations that merge an offset of
an address calculation into the LUI %%hi and ADD %lo of the lowering sequence.
The peephole handles three patterns:
1) ADDI (ADDI (LUI %hi(global)) %lo(global)), offset
--->
ADDI (LUI %hi(global + offset)) %lo(global + offset).
This generates:
lui a0, hi (global + offset)
add a0, a0, lo (global + offset)
Instead of
lui a0, hi (global)
addi a0, hi (global)
addi a0, offset
This pattern is for cases when the offset is small enough to fit in the
immediate filed of ADDI (less than 12 bits).
2) ADD ((ADDI (LUI %hi(global)) %lo(global)), (LUI hi_offset))
--->
offset = hi_offset << 12
ADDI (LUI %hi(global + offset)) %lo(global + offset)
Which generates the ASM:
lui a0, hi(global + offset)
addi a0, lo(global + offset)
Instead of:
lui a0, hi(global)
addi a0, lo(global)
lui a1, (offset)
add a0, a0, a1
This pattern is for cases when the offset doesn't fit in an immediate field
of ADDI but the lower 12 bits are all zeros.
3) ADD ((ADDI (LUI %hi(global)) %lo(global)), (ADDI lo_offset, (LUI hi_offset)))
--->
offset = global + offhi20<<12 + offlo12
ADDI (LUI %hi(global + offset)) %lo(global + offset)
Which generates the ASM:
lui a1, %hi(global + offset)
addi a1, %lo(global + offset)
Instead of:
lui a0, hi(global)
addi a0, lo(global)
lui a1, (offhi20)
addi a1, (offlo12)
add a0, a0, a1
This pattern is for cases when the offset doesn't fit in an immediate field
of ADDI and both the lower 1 bits and high 20 bits are non zero.
Reviewers: asb
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, apazos,
niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang
llvm-svn: 333455
To do this:
1. Add fixup_riscv_relax fixup types which eventually will
transfer to R_RISCV_RELAX relocation types.
2. Insert R_RISCV_RELAX relocation types to auipc function call
expression when linker relaxation enabled.
Differential Revision: https://reviews.llvm.org/D44886
llvm-svn: 333158
Summary:
Set CostPerUse higher for registers that are not used in the compressed
instruction set. This will influence the greedy register allocator to reduce
the use of registers that can't be encoded in 16 bit instructions. This
affects register allocation even when compressed instruction isn't targeted,
we see no major negative codegen impact.
Reviewers: asb
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, apazos, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang
Differential Revision: https://reviews.llvm.org/D47039
llvm-svn: 333132
For RISC-V it is desirable to have relaxation happen in the linker once
addresses are known, and as such the size between two instructions/byte
sequences in a section could change.
For most assembler expressions, this is fine, as the absolute address results
in the expression being converted to a fixup, and finally relocations.
However, for expressions such as .quad .L2-.L1, the assembler folds this down
to a constant once fragments are laid out, under the assumption that the
difference can no longer change, although in the case of linker relaxation the
differences can change at link time, so the constant is incorrect. One place
where this commonly appears is in debug information, where the size of a
function expression is in a form similar to the above.
This patch extends the assembler to allow an AsmBackend to declare that it
does not want the assembler to fold down this expression, and instead generate
a pair of relocations that allow the linker to carry out the calculation. In
this case, the expression is not folded, but when it comes to emitting a
fixup, the generic FK_Data_* fixups are converted into a pair, one for the
addition half, one for the subtraction, and this is passed to the relocation
generating methods as usual. I have named these FK_Data_Add_* and
FK_Data_Sub_* to indicate which half these are for.
For RISC-V, which supports this via e.g. the R_RISCV_ADD64, R_RISCV_SUB64 pair
of relocations, these are also set to always emit relocations relative to
local symbols rather than section offsets. This is to deal with the fact that
if relocations were calculated on e.g. .text+8 and .text+4, the result 12
would be stored rather than 4 as both addends are added in the linker.
Differential Revision: https://reviews.llvm.org/D45181
Patch by Simon Cook.
llvm-svn: 333079
This is a different approach to fixing the problem described in D46746.
RISCVAsmBackend currently depends on the getSize helper function returning the
number of bytes a fixup may change (note: some other backends have a similar
helper named getFixupNumKindBytes). As noted in that review, this doesn't
return the correct size for FK_Data_1, FK_Data_2, or FK_Data_8 meaning that
too few bytes will be written in the case of FK_Data_8, and there's the
potential of writing outside the Data array for the smaller fixups.
D46746 extends getSize to recognise some of the builtin fixup types. Rather
than having a function that needs to be kept up to date as new builtin or
target-specific fixups are added, We can calculate an appropriate bound on the
number of bytes that might be touched using Info.TargetSize and
Info.TargetOffset.
Differential Revision: https://reviews.llvm.org/D46965
llvm-svn: 333076
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
For RISCV branch instructions, we need to preserve relocation types when linker
relaxation enabled, so then linker could modify offset when the branch offsets
changed.
We preserve relocation types by define shouldForceRelocation.
IsResolved return by evaluateFixup will always false when shouldForceRelocation
return true. It will make RISCV MC Branch Relaxation always relax 16-bit
branches to 32-bit form, even if the symbol actually could be resolved.
To avoid 16-bit branches always relax to 32-bit form when linker relaxation
enabled, we add a new parameter WasForced to indicate that the symbol actually
couldn't be resolved and not forced by shouldForceRelocation return true.
RISCVAsmBackend::fixupNeedsRelaxationAdvanced could relax branches with
unresolved symbols by (!IsResolved && !WasForced).
RISCV MC Branch Relaxation is needed because RISCV could perform 32-bit
to 16-bit transformation in MC layer.
Differential Revision: https://reviews.llvm.org/D46350
llvm-svn: 332696
Summary:
When lowering global address, lower the base as a TargetGlobal first then
create an SDNode for the offset separately and chain it to the address calculation
This optimization will create a DAG where the base address of a global access will
be reused between different access. The offset can later be folded into the immediate
part of the memory access instruction.
With this optimization we generate:
lui a0, %hi(s)
addi a0, a0, %lo(s) ; shared base address.
addi a1, zero, 20 ; 2 instructions per access.
sw a1, 44(a0)
addi a1, zero, 10
sw a1, 8(a0)
addi a1, zero, 30
sw a1, 80(a0)
Instead of:
lui a0, %hi(s+44) ; 3 instructions per access.
addi a1, zero, 20
sw a1, %lo(s+44)(a0)
lui a0, %hi(s+8)
addi a1, zero, 10
sw a1, %lo(s+8)(a0)
lui a0, %hi(s+80)
addi a1, zero, 30
sw a1, %lo(s+80)(a0)
Which will save one instruction per access.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, apazos, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D46989
llvm-svn: 332641
Summary:
This patch implements MC support for tail psuedo instruction.
A follow-up patch implements the codegen support as well as handling of the indirect tail pseudo instruction.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, llvm-commits
Differential Revision: https://reviews.llvm.org/D46221
llvm-svn: 332634
The isReMaterlizable flag is somewhat confusing, unlike most other instruction
flags it is currently interpreted as a hint (mightBeRematerializable would be
a better name). While LUI is always rematerialisable, for an instruction like
ADDI it depends on its operands. TargetInstrInfo::isTriviallyReMaterializable
will call TargetInstrInfo::isReallyTriviallyReMaterializable, which in turn
calls TargetInstrInfo::isReallyTriviallyReMaterializableGeneric. We rely on
the logic in the latter to pick out instances of ADDI that really are
rematerializable.
The isReMaterializable flag does make a difference on a variety of test
programs. The recently committed remat.ll test case demonstrates how stack
usage is reduce and a unnecessary lw/sw can be removed. Stack usage in the
Proc0 function in dhrystone reduces from 192 bytes to 112 bytes.
For the sake of completeness, this patch also implements
RISCVRegisterInfo::isConstantPhysReg. Although this is called from a number of
places, it doesn't seem to result in different codegen for any programs I've
thrown at it. However, it is called in the rematerialisation codepath and it
seems sensible to implement something correct here.
Differential Revision: https://reviews.llvm.org/D46182
llvm-svn: 332617
These directives are recognised by gas. Support is added through the use of
addAliasForDirective.
Also match RISC-V gcc in preferring .half and .word for 16-bit and 32-bit data
directives.
llvm-svn: 332574
1. Deine FeatureRelax to enable/disable linker relaxation.
2. Define shouldForceRelocation to preserve relocation types even if the fixup
can be resolved when linker relaxation enabled. This is necessary for
correctness as offsets may change during relaxation.
Differential Revision: https://reviews.llvm.org/D46674
llvm-svn: 332318
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
These directives allow the 'C' (compressed) extension to be enabled/disabled
within a single file.
Differential Revision: https://reviews.llvm.org/D45864
Patch by Kito Cheng
llvm-svn: 332107
Inspired by r331508, I did a grep and found these.
Mostly just change from dyn_cast to cast. Some cases also showed a dyn_cast result being converted to bool, so those I changed to isa.
llvm-svn: 331577
This causes some slight shuffling but no meaningful codegen differences on the
corpus I used for testing, but it has a larger impact when combined with e.g.
rematerialisation. Regardless, it makes sense to report as accurate
target-specific information as possible.
llvm-svn: 330949
I'm unable to construct a representative test case that demonstrates the
advantage, but it seems sensible to report accurate target-specific
information regardless.
llvm-svn: 330938
This has no impact on codegen for the current RISC-V unit tests or my small
benchmark set and very minor changes in a few programs in the GCC torture
suite. Based on this, I haven't been able to produce a representative test
program that demonstrates a benefit from isLegalAddressingMode. I'm committing
the patch anyway, on the basis that presenting accurate information to the
target-independent code is preferable to relying on incorrect generic
assumptions.
llvm-svn: 330932
Previously `call zero`, `call f0` etc would fail. This leads to compilation
failures if building programs that define functions with those names and using
-save-temps.
llvm-svn: 330846
To do this:
1. Change GlobalAddress SDNode to TargetGlobalAddress to avoid legalizer
split the symbol.
2. Change ExternalSymbol SDNode to TargetExternalSymbol to avoid legalizer
split the symbol.
3. Let PseudoCALL match direct call with target operand TargetGlobalAddress
and TargetExternalSymbol.
Differential Revision: https://reviews.llvm.org/D44885
llvm-svn: 330827
To do this:
1. Add PseudoCALLIndirct to match indirect function call.
2. Add PseudoCALL to support parsing and print pseudo `call` in assembly
3. Expand PseudoCALL to the following form with R_RISCV_CALL relocation type
while encoding:
auipc ra, func
jalr ra, ra, 0
If we expand PseudoCALL before emitting assembly, we will see auipc and jalr
pair when compile with -S. It's hard for assembly parser to parsing this
pair and identify it's semantic is function call and then insert R_RISCV_CALL
relocation type. Although we could insert R_RISCV_PCREL_HI20 and
R_RISCV_PCREL_LO12_I relocation types instead of R_RISCV_CALL.
Due to RISCV relocation design, auipc and jalr pair only can relax to jal with
R_RISCV_CALL + R_RISCV_RELAX relocation types.
We expand PseudoCALL as late as encoding(RISCVMCCodeEmitter) instead of before
emitting assembly(RISCVAsmPrinter) because we want to preserve call
pseudoinstruction in assembly code. It's more readable and assembly parser
could identify call assembly and insert R_RISCV_CALL relocation type.
Differential Revision: https://reviews.llvm.org/D45859
llvm-svn: 330826
Reverts rL330224, while issues with the C extension and missed common
subexpression elimination opportunities are addressed. Neither of these issues
are visible in current RISC-V backend unit tests, which clearly need
expanding.
llvm-svn: 330281
The implementation follows the MIPS backend and expands the
pseudo instruction directly during asm parsing. As the result, only
real MC instructions are emitted to the MCStreamer. Additionally,
PseudoLI instructions are emitted during codegen. The actual
expansion to real instructions is performed during MI to MC lowering
and is similar to the expansion performed by the GNU Assembler.
Differential Revision: https://reviews.llvm.org/D41949
Patch by Mario Werner.
llvm-svn: 330224
Summary:
Specifying assert message with an || operator makes the compiler interpret it
as a bool. Changed it to &&.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D45660
llvm-svn: 330148
Summary:
GCC compresses the pseudo instruction "mv rd, rs", which is an alias of
"addi rd, rs, 0", to "c.mv rd, rs".
In LLVM we rely on the canonical MC instruction (MCInst) to do our compression
checks and since there is no rule to compress "addi rd, rs, 0" --> "c.mv
rd, rs" we lose this compression opportunity to gcc.
In this patch we fix that by adding an addi to c.mv compression pattern, the
instruction "mv rd, rs" will be compressed to "c.mv rd, rs" just like
gcc does.
Patch by Zhaoshi Zheng (zzheng) and Sameer (sabuasal).
Reviewers: asb, apazos, zzheng, mgrang, shiva0217
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, niosHD, kito-cheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D45583
llvm-svn: 329939
Summary:
According RISC-V ELF psABI specification, base RV32 and RV64 ISAs only
allow 32-bit instruction alignment, but instruction allow to be aligned
to 16-bit boundaries for C-extension.
So we just align to 4 bytes and 2 bytes for C-extension is enough.
Reviewers: asb, apazos
Differential Revision: https://reviews.llvm.org/D45560
Patch by Kito Cheng.
llvm-svn: 329899
Also add double-prevoius-failure.ll which captures a test case that at one
point triggered a compiler crash, while developing calling convention support
for f64 on RV32D with soft-float ABI.
llvm-svn: 329877
fadd.d is required in order to force floating point registers to be used in
test code, as parameters are passed in integer registers in the soft float
ABI.
Much of this patch is concerned with support for passing f64 on RV32D with a
soft-float ABI. Similar to Mips, introduce pseudoinstructions to build an f64
out of a pair of i32 and to split an f64 to a pair of i32. BUILD_PAIR and
EXTRACT_ELEMENT can't be used, as a BITCAST to i64 would be necessary, but i64
is not a legal type.
llvm-svn: 329871
Summary:
This patch implements a tablegen-driven Instruction Compression
mechanism for generating RISCV compressed instructions
(C Extension) from the expanded instruction form.
This tablegen backend processes CompressPat declarations in a
td file and generates all the compile-time and runtime checks
required to validate the declarations, validate the input
operands and generate correct instructions.
The checks include validating register operands, immediate
operands, fixed register operands and fixed immediate operands.
Example:
class CompressPat<dag input, dag output> {
dag Input = input;
dag Output = output;
list<Predicate> Predicates = [];
}
let Predicates = [HasStdExtC] in {
def : CompressPat<(ADD GPRNoX0:$rs1, GPRNoX0:$rs1, GPRNoX0:$rs2),
(C_ADD GPRNoX0:$rs1, GPRNoX0:$rs2)>;
}
The result is an auto-generated header file
'RISCVGenCompressEmitter.inc' which exports two functions for
compressing/uncompressing MCInst instructions, plus
some helper functions:
bool compressInst(MCInst& OutInst, const MCInst &MI,
const MCSubtargetInfo &STI,
MCContext &Context);
bool uncompressInst(MCInst& OutInst, const MCInst &MI,
const MCRegisterInfo &MRI,
const MCSubtargetInfo &STI);
The clients that include this auto-generated header file and
invoke these functions can compress an instruction before emitting
it, in the target-specific ASM or ELF streamer, or can uncompress
an instruction before printing it, when the expanded instruction
format aliases is favored.
The following clients were added to implement compression\uncompression
for RISCV:
1) RISCVAsmParser::MatchAndEmitInstruction:
Inserted a call to compressInst() to compresses instructions
parsed by llvm-mc coming from an ASM input.
2) RISCVAsmPrinter::EmitInstruction:
Inserted a call to compressInst() to compress instructions that
were lowered from Machine Instructions (MachineInstr).
3) RVInstPrinter::printInst:
Inserted a call to uncompressInst() to print the expanded
version of the instruction instead of the compressed one (e.g,
add s0, s0, a5 instead of c.add s0, a5) when -riscv-no-aliases
is not passed.
This patch squashes D45119, D42780 and D41932. It was reviewed in smaller patches by
asb, efriedma, apazos and mgrang.
Reviewers: asb, efriedma, apazos, llvm-commits, sabuasal
Reviewed By: sabuasal
Subscribers: mgorny, eraman, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, niosHD, kito-cheng, shiva0217, zzheng
Differential Revision: https://reviews.llvm.org/D45385
llvm-svn: 329455
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
Summary:
LLVM defaults to the newer .init_array/.fini_array scheme for static
constructors rather than the less desirable .ctors/.dtors (the UseCtors
flag defaults to false). This wasn't being respected in the RISC-V
backend because it fails to call TargetLoweringObjectFileELF::InitializeELF with the the appropriate
flag for UseInitArray.
This patch fixes this by implementing RISCVELFTargetObjectFile and overriding its Initialize method to call
InitializeELF(TM.Options.UseInitArray).
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: mgorny, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, kito-cheng, shiva0217, llvm-commits
Differential Revision: https://reviews.llvm.org/D44750
llvm-svn: 328433
This patch also includes extensive tests targeted at select and br+fcmp IR
inputs. A sequence of br+fcmp required support for FPR32 registers to be added
to RISCVInstrInfo::storeRegToStackSlot and
RISCVInstrInfo::loadRegFromStackSlot.
llvm-svn: 328104
E.g.
bar (int x)
{
char p[x];
push outgoing variables for foo.
call foo
}
We need to generate stack adjustment instructions for outgoing arguments by
eliminateCallFramePseudoInstr when the function contains variable size
objects to avoid outgoing variables corrupt the variable size object.
Default hasReservedCallFrame will return !hasFP().
We don't want to generate extra sp adjustment instructions when hasFP()
return true, So We override hasReservedCallFrame as !hasVarSizedObjects().
Differential Revision: https://reviews.llvm.org/D43752
llvm-svn: 327938
Summary:
This patch implements relaxation for RISCV in the MC layer.
The following relaxations are currently handled:
1) Relax C_BEQZ to BEQ and C_BNEZ to BNEZ in RISCV.
2) Relax and C_J $imm to JAL x0, $imm and CJAL to JAL ra, $imm.
Reviewers: asb, llvm-commits, efriedma
Reviewed By: asb
Subscribers: shiva0217
Differential Revision: https://reviews.llvm.org/D43055
llvm-svn: 326626
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Implement c.lui immediate constraint to [1, 31] and [0xfffe0, 0xfffff].
The RISC-V ISA describes the constraint as [1, 63], with that value
being loaded in to bits 17-12 of the destination register and sign extended
from bit 17. Therefore, this 6-bit immediate can represent values in the
ranges [1, 31] and [0xfffe0, 0xfffff].
Differential Revision: https://reviews.llvm.org/D42834
llvm-svn: 325792
As pointed out by @sabuasal in a comment on D23568, the logic in
RISCVMCCodeEmitter::getImmOpValue could be more defensive. Although with the
current instruction definitions it is always the case that `VK_RISCV_LO` is
always used with either an I- or S-format instruction, this may not always be
the case in the future. Add a check to ensure we will get an assertion in
debug builds if that changes.
llvm-svn: 325775
Previously some targets printed their own message at the start of Select to indicate what they were selecting. For the targets that didn't, it means there was no print of the root node before any custom handling in the target executed. So if the target did something custom and never called SelectNodeCommon, no print would be made. For the targets that did print a message in Select, if they didn't custom handle a node SelectNodeCommon would reprint the root node before walking the isel table.
It seems better to just print the message before the call to Select so all targets behave the same. And then remove the root node printing from SelectNodeCommon and just leave a message that says we're starting the table search.
There were also some oddities in blank line behavior. Usually due to a \n after a call to SelectionDAGNode::dump which already inserted a new line.
llvm-svn: 323551
When the compressed instruction set is enabled, the 16-bit c.nop can be
generated if necessary.
Differential Revision: https://reviews.llvm.org/D41221
Patch by Shiva Chen.
llvm-svn: 322658
Although the register scavenger can often find a spare register, an emergency
spill slot is needed to guarantee success. Reserve this slot in cases where
the function is known to have a large stack (meaning the scavenger may be
needed when forming stack addresses).
llvm-svn: 322269
Branch relaxation is needed to support branch displacements that overflow the
instruction's immediate field.
Differential Revision: https://reviews.llvm.org/D40830
llvm-svn: 322224
This is a prerequisite for the branch relaxation pass, and allows a number of
optimisation passes (e.g. BranchFolding and MachineBlockPlacement) to work.
Differential Revision: https://reviews.llvm.org/D40808
llvm-svn: 322222
Includes support for expanding va_copy. Also adds support for using 'aligned'
registers when necessary for vararg calls, and ensure the frame pointer always
points to the bottom of the vararg spill region. This is necessary to ensure
that the saved return address and stack pointer are always available at fixed
known offsets of the frame pointer.
Differential Revision: https://reviews.llvm.org/D40805
llvm-svn: 322215
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
c.slli/c.srli/c.srai allow a 5-bit shift in RV32C and a 6-bit shift in RV64C.
This patch adds uimmlog2xlennonzero to reflect this constraint as well as
tests.
Differential Revision: https://reviews.llvm.org/D41216
Patch by Shiva Chen.
llvm-svn: 320799
This patch switches the default for -riscv-no-aliases to false
and updates all affected MC and CodeGen tests. As recommended in
D41071, MC tests use the canonical instructions and the CodeGen
tests use the aliases.
Additionally, for the f and d instructions with rounding mode,
the tests for the aliased versions are moved and tightened such
that they can actually detect if alias emission is enabled.
(see D40902 for context)
Differential Revision: https://reviews.llvm.org/D41225
Patch by Mario Werner.
llvm-svn: 320797
Unfortunately these aren't defined explicitly in the privileged spec, but the
GNU assembler does accept `sfence.vma` and `sfence.vma rs` as well as the
usual `sfence.vma rs, rt`.
llvm-svn: 320575
Adds the assembler aliases for the floating point instructions
which can be mapped to a single canonical instruction. The missing
pseudo instructions (flw, fld, fsw, fsd) are marked as TODO. Other
things, like for example PCREL_LO, have to be implemented first.
This patch builds upon D40902.
Differential Revision: https://reviews.llvm.org/D41071
Patch by Mario Werner.
llvm-svn: 320569
When an instruction mnemonic contains a '.', we usually name the instruction
with a _ in that place. e.g. fadd.s -> FADD_S.
This patch updates RISCVInstrInfoC.td to do the same, e.g. c.nop -> C_NOP.
Also includes some minor formatting changes in RISCVInstrInfoC.td to better
align it with the formatting conventions in the rest of the backend.
llvm-svn: 320560
Roger Ferrer Ibanez