Modified the testcases to use both pass managers
Use single commandline flag for both pass managers.
Differential Revision: https://reviews.llvm.org/D52708
Reviewers: sebpop, tejohnson, brzycki, SirishP
Reviewed By: tejohnson, brzycki
llvm-svn: 343662
This reverts commit r342387 as it's showing significant performance
regressions in a number of benchmarks. Followed up with the
committer and original thread with an example and will get performance
numbers before recommitting.
llvm-svn: 343522
Summary: This patch adds bindings to C and Go for addCoroutinePassesToExtensionPoints, which is used to add coroutine passes to the correct locations in PassManagerBuilder.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: mehdi_amini, modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D51642
llvm-svn: 343336
This patch turns LoopInterchange into a loop pass. It now only
considers top-level loops and tries to move the innermost loop to the
optimal position within the loop nest. By only looking at top-level
loops, we might miss a few opportunities the function pass would get
(e.g. if we have a loop nest of 3 loops, in the function pass
we might process loops at level 1 and 2 and move the inner most loop to
level 1, and then we process loops at levels 0, 1, 2 and interchange
again, because we now have a different inner loop). But I think it would
be better to handle such cases by picking the best inner loop from the
start and avoid re-visiting the same loops again.
The biggest advantage of it being a function pass is that it interacts
nicely with the other loop passes. Without this patch, there are some
performance regressions on AArch64 with loop interchanging enabled,
where no loops were interchanged, but we missed out on some other loop
optimizations.
It also removes the SimplifyCFG run. We are just changing branches, so
the CFG should not be more complicated, besides the additional 'unique'
preheaders this pass might create.
Reviewers: chandlerc, efriedma, mcrosier, javed.absar, xbolva00
Reviewed By: xbolva00
Differential Revision: https://reviews.llvm.org/D51702
llvm-svn: 343308
Summary:
Add a dominance check to ensure that the possible devirtualizable
call is actually dominated by the type test/checked load intrinsic being
analyzed. With PGO, after indirect call promotion is performed during
the compile step, followed by inlining, we may have a type test in the
promoted and inlined sequence that allows an indirect call in that
sequence to be devirtualized. That indirect call (inserted by inlining
after promotion) will share the same vtable pointer as the fallback
indirect call that cannot be devirtualized.
Before this patch the code was incorrectly devirtualizing the fallback
indirect call.
See the new test and the example described there for more details.
Reviewers: pcc, vitalybuka
Subscribers: mehdi_amini, Prazek, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D52514
llvm-svn: 343226
DeadArgElim pass marks unused function arguments as ‘undef’ without updating
existing dbg.values referring to it. As a consequence the debug info
metadata in the final executable was wrong.
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D51968
llvm-svn: 342871
Summary:
AvailableExternal was not handled in isDiscardableIfUnused when isDiscardableIfUnused
was added in r158476. Till it was handled in r247044. This is a NFC.
Reviewers: pcc, tejohnson
Reviewed By: tejohnson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52319
llvm-svn: 342684
Summary:
Currently only the first function in the module is checked to
see if it has remarks enabled. If that first function is a declaration,
remarks will be incorrectly skipped. Change to look for the first
non-empty function.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51556
llvm-svn: 342477
Rebase rL341954 since https://bugs.llvm.org/show_bug.cgi?id=38912
has been fixed by rL342055.
Precommit testing performed:
* Overnight runs of csmith comparing the output between programs
compiled with gvn-hoist enabled/disabled.
* Bootstrap builds of clang with UbSan/ASan configurations.
llvm-svn: 342387
The patch saves a function offset table which maps function name index to the
offset of its function profile to the start of the binary profile. By using
the function offset table, for those function profiles which will not be used
when compiling a module, the profile reader does't have to read them. For
profile size around 10~20M, it saves ~10% compile time.
Differential Revision: https://reviews.llvm.org/D51863
llvm-svn: 342283
The test used to fail with an invalid phi node: the two predecessors were outlined
and the SSA representation was left invalid. The patch adds the exit block to the
cold region.
llvm-svn: 342277
remove duplicate entries from isSingleEntrySingleExit: the Entry block is
already added by the loop over the dominance frontier.
Remove the heuristic from isOutlineCandidate that a region is too small when it
only contains a basic block. With this change we now grow regions starting from
a block and we continue adding to the ValidColdRegion. Check the heuristic just
before code generation.
llvm-svn: 342276
Also fix a problem in forward propagation:
const TerminatorInst *TI = It->getTerminator();
was set outside the while loop that iterates over It.
llvm-svn: 342275
This reverts rL341954.
The builder `sanitizer-x86_64-linux-bootstrap-ubsan` has been
failing with timeouts at stage2 clang/ubsan:
[3065/3073] Linking CXX executable bin/lld
command timed out: 1200 seconds without output running python
../sanitizer_buildbot/sanitizers/buildbot_selector.py,
attempting to kill
llvm-svn: 342001
The presence of readnone and an access range attribute (argmemonly,
inaccessiblememonly, inaccessiblemem_or_argmemonly) is considered an
error by the verifier. This seems strict but also not wrong. This
patch makes sure function attribute detection will remove all access
range attributes for readnone functions.
llvm-svn: 341927
Before tagging a function with coldcc make sure the target supports cold calling
convention. Without this patch HotColdSplitting pass fails on aarch64 with:
fatal error: error in backend: Unsupported calling convention.
llvm-svn: 341838
Find cold blocks based on profile information (or optionally with static analysis).
Forward propagate profile information to all cold-blocks.
Outline a cold region.
Set calling conv and prof hint for the callsite of the outlined function.
Worked in collaboration with: Sebastian Pop <s.pop@samsung.com>
Differential Revision: https://reviews.llvm.org/D50658
llvm-svn: 341669
The patch tries to make sample profile loader independent of profile format
change. It moves compact format related code into FunctionSamples and
SampleProfileReader classes, and sample profile loader only has to interact
with those two classes and will be unaware of profile format changes.
The cleanup also contain some fixes to further remove the difference between
compactbinary format and binary format. After the cleanup using different
formats originated from the same profile will generate the same binaries,
which we verified by compiling two large server benchmarks w/wo thinlto.
Differential Revision: https://reviews.llvm.org/D51643
llvm-svn: 341591
Summary:
Control height reduction merges conditional blocks of code and reduces the
number of conditional branches in the hot path based on profiles.
if (hot_cond1) { // Likely true.
do_stg_hot1();
}
if (hot_cond2) { // Likely true.
do_stg_hot2();
}
->
if (hot_cond1 && hot_cond2) { // Hot path.
do_stg_hot1();
do_stg_hot2();
} else { // Cold path.
if (hot_cond1) {
do_stg_hot1();
}
if (hot_cond2) {
do_stg_hot2();
}
}
This speeds up some internal benchmarks up to ~30%.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: xbolva00, dmgreen, mehdi_amini, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D50591
llvm-svn: 341386
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
Rebase rL338240 since the excessive memory usage observed when using
GVNHoist with UBSan has been fixed by rL340818.
Differential Revision: https://reviews.llvm.org/D49858
llvm-svn: 340922
Summary:
Sometimes reading an output *.ll file it is not easy to understand why some callsites are not inlined. We can read output of inline remarks (option --pass-remarks-missed=inline) and try correlating its messages with the callsites.
An easier way proposed by this patch is to add to every callsite processed by Inliner an attribute with the latest message that describes the cause of not inlining this callsite. The attribute is called //inline-remark//. By default this feature is off. It can be switched on by the option //-inline-remark-attribute//.
For example in the provided test the result method //@test1// has two callsites //@bar// and inline remarks report different inlining missed reasons:
remark: <unknown>:0:0: bar not inlined into test1 because too costly to inline (cost=-5, threshold=-6)
remark: <unknown>:0:0: bar not inlined into test1 because it should never be inlined (cost=never): recursive
It is not clear which remark correspond to which callsite. With the inline remark attribute enabled we get the reasons attached to their callsites:
define void @test1() {
call void @bar(i1 true) #0
call void @bar(i1 false) #2
ret void
}
attributes #0 = { "inline-remark"="(cost=-5, threshold=-6)" }
..
attributes #2 = { "inline-remark"="(cost=never): recursive" }
Patch by: yrouban (Yevgeny Rouban)
Reviewers: xbolva00, tejohnson, apilipenko
Reviewed By: xbolva00, tejohnson
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D50435
llvm-svn: 340834
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
Summary:
Sometimes reading an output *.ll file it is not easy to understand why some callsites are not inlined. We can read output of inline remarks (option --pass-remarks-missed=inline) and try correlating its messages with the callsites.
An easier way proposed by this patch is to add to every callsite processed by Inliner an attribute with the latest message that describes the cause of not inlining this callsite. The attribute is called //inline-remark//. By default this feature is off. It can be switched on by the option //-inline-remark-attribute//.
For example in the provided test the result method //@test1// has two callsites //@bar// and inline remarks report different inlining missed reasons:
remark: <unknown>:0:0: bar not inlined into test1 because too costly to inline (cost=-5, threshold=-6)
remark: <unknown>:0:0: bar not inlined into test1 because it should never be inlined (cost=never): recursive
It is not clear which remark correspond to which callsite. With the inline remark attribute enabled we get the reasons attached to their callsites:
define void @test1() {
call void @bar(i1 true) #0
call void @bar(i1 false) #2
ret void
}
attributes #0 = { "inline-remark"="(cost=-5, threshold=-6)" }
..
attributes #2 = { "inline-remark"="(cost=never): recursive" }
Patch by: yrouban (Yevgeny Rouban)
Reviewers: xbolva00, tejohnson, apilipenko
Reviewed By: xbolva00, tejohnson
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D50435
llvm-svn: 340618
These changes expand the FunctionAttr logic in order to mark functions as
WriteOnly when appropriate. This is done through an additional bool variable
and extended logic.
Reviewers: hfinkel, jdoerfert
Differential Revision: https://reviews.llvm.org/D48387
llvm-svn: 340537
This version of the patch fixes cleaning up ssa_copy intrinsics, so it does not
crash for instructions in blocks that have been marked unreachable.
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 340525
Summary:
Adds the option for the printing of summary information about functions
considered but rejected for importing during the thin link.
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D50881
llvm-svn: 340047
Summary:
When WPD is performed in a ThinLTO backend, the function may be created
if it isn't already in that module. Module::getOrInsertFunction may
add a bitcast, in which case the returned Constant is not a Function and
doesn't have a name. Invoke stripPointerCasts() on the returned value
where we access its name.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49959
llvm-svn: 339640
My previous change moved some code upwards which caused an assert in debug mode
because the global value didn't necessarily have an initializer. Don't do that.
llvm-svn: 339485
This makes the code easier to read and will make an upcoming patch I have easier to review because that patch needed this refactoring to reuse some of the functions.
llvm-svn: 339391
The inalloca parameter has to be the only parameter passed in memory.
Changing the convention to fastcc can break that.
At some point we should teach global opt how to optimize ABI attributes
like inalloca and maybe byval. These attributes are mainly used to match
C ABIs. They are harder for LLVM to optimize and they don't always
generate the best code.
Fixes PR38487
llvm-svn: 339360
Summary: DenseMap's operator[] performs an insertion if the entry isn't found. The second phase of ConstantMerge isn't trying to insert anything: it's just looking to see if the first phased performed an insertion. Use find instead, avoiding insertion of every single global initializer in the map of constants. This has the side-effect of making all entries in CMap non-null (because only global declarations would have null initializers, and that would be a bug).
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D50476
llvm-svn: 339309
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338969
This patch just extract code into a separate function to remove some
duplication between the old and new pass manager pipeline. Due to the
different CGSCC iterators used, not all code duplication was eliminated.
llvm-svn: 338585
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338494
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338387
We now, from clang, can turn arrays of
static short g_data[] = {16, 16, 16, 16, 16, 16, 16, 16, 0, 0, 0, 0, 0, 0, 0, 0};
into structs of the form
@g_data = internal global <{ [8 x i16], [8 x i16] }> ...
GlobalOpt will incorrectly SROA it, not realising that the access to the first
element may overflow into the second. This fixes it by checking geps more
thoroughly.
I believe this makes the globalsra-partial.ll test case invalid as the %i value
could be out of bounds. I've re-purposed it as a negative test for this case.
Differential Revision: https://reviews.llvm.org/D49816
llvm-svn: 338192
r337828 resolves a PredicateInfo issue with unnamed types.
Original message:
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
llvm-svn: 337904
Summary:
Without this change, the WholeProgramDevirt pass, which requires the
TargetLibraryInfo, will construct one from the default triple.
Fixes PR38139.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49278
llvm-svn: 337750
We tested different cap values with a recent commit of Chromium. Our results show that the 32-byte cap yields the smallest binary and all the caps yield similar performance.
Based on the results, we propose to change the cap value to 32-byte.
Patch by Zhaomo Yang!
Differential Revision: https://reviews.llvm.org/D49405
llvm-svn: 337622
Summary:
Enable these passes for CFI and WPD in ThinLTO and LTO with the new pass
manager. Add a couple of tests for both PMs based on the clang tests
tools/clang/test/CodeGen/thinlto-distributed-cfi*.ll, but just test
through llvm-lto2 and not with distributed ThinLTO.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49429
llvm-svn: 337461
This reverts commit r337081, therefore restoring r337050 (and fix in
r337059), with test fix for bot failure described after the original
description below.
In order to always import the same copy of a linkonce function,
even when encountering it with different thresholds (a higher one then a
lower one), keep track of the summary we decided to import.
This ensures that the backend only gets a single definition to import
for each GUID, so that it doesn't need to choose one.
Move the largest threshold the GUID was considered for import into the
current module out of the ImportMap (which is part of a larger map
maintained across the whole index), and into a new map just maintained
for the current module we are computing imports for. This saves some
memory since we no longer have the thresholds maintained across the
whole index (and throughout the in-process backends when doing a normal
non-distributed ThinLTO build), at the cost of some additional
information being maintained for each invocation of ComputeImportForModule
(the selected summary pointer for each import).
There is an additional map lookup for each callee being considered for
importing, however, this was able to subsume a map lookup in the
Worklist iteration that invokes computeImportForFunction. We also are
able to avoid calling selectCallee if we already failed to import at the
same or higher threshold.
I compared the run time and peak memory for the SPEC2006 471.omnetpp
benchmark (running in-process ThinLTO backends), as well as for a large
internal benchmark with a distributed ThinLTO build (so just looking at
the thin link time/memory). Across a number of runs with and without
this change there was no significant change in the time and memory.
(I tried a few other variations of the change but they also didn't
improve time or peak memory).
The new commit removes a test that no longer makes sense
(Transforms/FunctionImport/hotness_based_import2.ll), as exposed by the
reverse-iteration bot. The test depends on the order of processing the
summary call edges, and actually depended on the old problematic
behavior of selecting more than one summary for a given GUID when
encountered with different thresholds. There was no guarantee even
before that we would eventually pick the linkonce copy with the hottest
call edges, it just happened to work with the test and the old code, and
there was no guarantee that we would end up importing the selected
version of the copy that had the hottest call edges (since the backend
would effectively import only one of the selected copies).
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D48670
llvm-svn: 337184
In order to always import the same copy of a linkonce function,
even when encountering it with different thresholds (a higher one then a
lower one), keep track of the summary we decided to import.
This ensures that the backend only gets a single definition to import
for each GUID, so that it doesn't need to choose one.
Move the largest threshold the GUID was considered for import into the
current module out of the ImportMap (which is part of a larger map
maintained across the whole index), and into a new map just maintained
for the current module we are computing imports for. This saves some
memory since we no longer have the thresholds maintained across the
whole index (and throughout the in-process backends when doing a normal
non-distributed ThinLTO build), at the cost of some additional
information being maintained for each invocation of ComputeImportForModule
(the selected summary pointer for each import).
There is an additional map lookup for each callee being considered for
importing, however, this was able to subsume a map lookup in the
Worklist iteration that invokes computeImportForFunction. We also are
able to avoid calling selectCallee if we already failed to import at the
same or higher threshold.
I compared the run time and peak memory for the SPEC2006 471.omnetpp
benchmark (running in-process ThinLTO backends), as well as for a large
internal benchmark with a distributed ThinLTO build (so just looking at
the thin link time/memory). Across a number of runs with and without
this change there was no significant change in the time and memory.
(I tried a few other variations of the change but they also didn't
improve time or peak memory).
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D48670
llvm-svn: 337050
Summary:
Currently LowerTypeTests emits jumptable entries for all live external
and address-taken functions; however, we could limit the number of
functions that we emit entries for significantly.
For Cross-DSO CFI, we continue to emit jumptable entries for all
exported definitions. In the non-Cross-DSO CFI case, we only need to
emit jumptable entries for live functions that are address-taken in live
functions. This ignores exported functions and functions that are only
address taken in dead functions. This change uses ThinLTO summary data
(now emitted for all modules during ThinLTO builds) to determine
address-taken and liveness info.
The logic for emitting jumptable entries is more conservative in the
regular LTO case because we don't have summary data in the case of
monolithic LTO builds; however, once summaries are emitted for all LTO
builds we can unify the Thin/monolithic LTO logic to only use summaries
to determine the liveness of address taking functions.
This change is a partial fix for PR37474. It reduces the build size for
nacl_helper by ~2-3%, the reduction is due to nacl_helper compiling in
lots of unused code and unused functions that are address taken in dead
functions no longer being being considered live due to emitted jumptable
references. The reduction for chromium is ~0.1-0.2%.
Reviewers: pcc, eugenis, javed.absar
Reviewed By: pcc
Subscribers: aheejin, dexonsmith, dschuff, mehdi_amini, eraman, steven_wu, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D47652
llvm-svn: 337038
Summary:
I noticed that the .imports files emitted for distributed ThinLTO
backends do not have consistent ordering. This is because StringMap
iteration order is not guaranteed to be deterministic. Since we already
have a std::map with this information, used when emitting the individual
index files (ModuleToSummariesForIndex), use it for the imports files as
well.
This issue is likely causing some unnecessary rebuilds of the ThinLTO
backends in our distributed build system as the imports files are inputs
to those backends.
Reviewers: pcc, steven_wu, mehdi_amini
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48783
llvm-svn: 336721
Summary:
Support for this option is needed for building Linux kernel.
This is a very frequently requested feature by kernel developers.
More details : https://lkml.org/lkml/2018/4/4/601
GCC option description for -fdelete-null-pointer-checks:
This Assume that programs cannot safely dereference null pointers,
and that no code or data element resides at address zero.
-fno-delete-null-pointer-checks is the inverse of this implying that
null pointer dereferencing is not undefined.
This feature is implemented in LLVM IR in this CL as the function attribute
"null-pointer-is-valid"="true" in IR (Under review at D47894).
The CL updates several passes that assumed null pointer dereferencing is
undefined to not optimize when the "null-pointer-is-valid"="true"
attribute is present.
Reviewers: t.p.northover, efriedma, jyknight, chandlerc, rnk, srhines, void, george.burgess.iv
Reviewed By: efriedma, george.burgess.iv
Subscribers: eraman, haicheng, george.burgess.iv, drinkcat, theraven, reames, sanjoy, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47895
llvm-svn: 336613
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder Loop
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
llvm-svn: 336062
and diretory.
Also cleans up all the associated naming to be consistent and removes
the public access to the pass ID which was unused in LLVM.
Also runs clang-format over parts that changed, which generally cleans
up a bunch of formatting.
This is in preparation for doing some internal cleanups to the pass.
Differential Revision: https://reviews.llvm.org/D47352
llvm-svn: 336028
Summary:
The InlinerFunctionImportStats will collect and dump stats regarding how
many function inlined into the module were imported by ThinLTO.
Reviewers: wmi, dexonsmith
Subscribers: mehdi_amini, inglorion, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D48729
llvm-svn: 335914
Summary:
Rather than just print the GUID, when it is available in the index,
print the global name as well in the function import thin link debug
messages. Names will be available when the combined index is being
built by the same process, e.g. a linker or "llvm-lto2 run".
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D48612
llvm-svn: 335760
If a function has sample to use, but cannot use them because of no debug
information, currently a warning will be issued to inform the missing
opportunity.
This warning assumes the binary generating the profile and the binary using
the profile are similar enough. It is not always the case. Sometimes even
if the binaries are not quite similar, we may still get some benefit by
using sampleFDO. In those cases, we may still want to apply sampleFDO but
not want to see a lot of such warnings pop up.
The patch adds an option for the warning.
Differential Revision: https://reviews.llvm.org/D48510
llvm-svn: 335484
Since we are now producing a summary also for regular LTO builds, we
need to run the NameAnonGlobals pass in those cases as well (the
summary cannot handle anonymous globals).
See https://reviews.llvm.org/D34156 for details on the original change.
This reverts commit 6c9ee4a4a438a8059aacc809b2dd57128fccd6b3.
llvm-svn: 335385
This is the first pass in the main pipeline to use the legacy PM's
ability to run function analyses "on demand". Unfortunately, it turns
out there are bugs in that somewhat-hacky approach. At the very least,
it leaks memory and doesn't support -debug-pass=Structure. Unclear if
there are larger issues or not, but this should get the sanitizer bots
back to green by fixing the memory leaks.
llvm-svn: 335320
This patch adds support for generating a call graph profile from Branch Frequency Info.
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
Differential Revision: https://reviews.llvm.org/D48105
llvm-svn: 335306
This reverts commit r335206.
As discussed here: https://reviews.llvm.org/rL333740, a fix will come
tomorrow. In the meanwhile, revert this to fix some bots.
llvm-svn: 335272
r335150 should resolve the issues with the clang-with-thin-lto-ubuntu
and clang-with-lto-ubuntu builders.
Original message:
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
llvm-svn: 335206
Currently SmallSet<PointerTy> inherits from SmallPtrSet<PointerTy>. This
patch replaces such types with SmallPtrSet, because IMO it is slightly
clearer and allows us to get rid of unnecessarily including SmallSet.h
Reviewers: dblaikie, craig.topper
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D47836
llvm-svn: 334492
Name table occupies a big chunk of size in current binary format sample profile.
In order to reduce its size, the patch changes the sample writer/reader to
save/restore MD5Hash of names in the name table. Sample annotation phase will
also use MD5Hash of name to query samples accordingly.
Experiment shows compact binary format can reduce the size of sample profile by
2/3 compared with binary format generally.
Differential Revision: https://reviews.llvm.org/D47955
llvm-svn: 334447
With the upcoming patch to add summary parsing support, IsAnalysis would
be true in contexts where we are not performing module summary analysis.
Rename to the more specific and approprate HaveGVs, which is essentially
what this flag is indicating.
llvm-svn: 334140
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
entries to reach the target. Since these calls don't require type checks,
we can short-circuit them to their real targets, except in cases when they
can be pre-empted.
Differential Revision: https://reviews.llvm.org/D46326
llvm-svn: 333937
Summary:
Emit summaries for bitcode modules that are only destined for the
regular LTO portion of the build so they can participate in
summary-based dead stripping.
This change reduces the size of a nacl_helper build with cfi-icall
enabled by 7%, removing the majority of the overhead due to enabling
cfi-icall. The cfi-icall size increase was caused by compiling in lots
of unused code and cfi-icall generating jumptable references to unused
symbols that could no longer be removed by -Wl,-gc-sections. Increasing
the visibility of summary-based dead stripping prevented jumptable
entries being created for unused symbols from the regular LTO portion
of the build.
Reviewers: pcc
Reviewed By: pcc
Subscribers: dschuff, mehdi_amini, inglorion, eraman, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D47594
llvm-svn: 333768
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 333740
- Make eraseMetadata return whether it changed something
- Wire getMetadata for a single MDNode efficiently into the attachment
map
- Add hasMetadata, which is less weird than checking getMetadata ==
nullptr on a multimap.
Use it to simplify code.
llvm-svn: 333649
Summary:
Fix PR37625. It's possible for an extern_weak declaration to be emitted
to the merged module when a definition exists in the ThinLTO portion of
the build; discard the linkage on the declaration in that case.
(otherwise we copy the linkage to the alias to the jumptable and fail)
Reviewers: pcc
Reviewed By: pcc
Subscribers: mehdi_amini, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D47494
llvm-svn: 333604
The set properties are never used, so a vector is enough. No
functionality change intended.
While there add some std::moves to SparseSolver.
llvm-svn: 333582
loop-cleanup passes at the beginning of the loop pass pipeline, and
re-enqueue loops after even trivial unswitching.
This will allow us to much more consistently avoid simplifying code
while doing trivial unswitching. I've also added a test case that
specifically shows effective iteration using this technique.
I've unconditionally updated the new PM as that is always using the
SimpleLoopUnswitch pass, and I've made the pipeline changes for the old
PM conditional on using this new unswitch pass. I added a bunch of
comments to the loop pass pipeline in the old PM to make it more clear
what is going on when reviewing.
Hopefully this will unblock doing *partial* unswitching instead of just
full unswitching.
Differential Revision: https://reviews.llvm.org/D47408
llvm-svn: 333493
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now-jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
llvm-svn: 333358
Reverting this to see if this is causing the failures of the
clang-with-thin-lto-ubuntu bot.
[IPSCCP] Use PredicateInfo to propagate facts from cmp instructions.
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 333323
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 333268
Aditya Kumar