This reverts commit 71b648f715.
There was a typo in the last commit which was causing LLDB AArch64 Linux
buildbot testsuite failures. Now fixed in current version.
This fixes (works around) two errors with gcc-6.5.
- in the RegisterContext_x86 files, gcc is unable to synthesize a
default constructor -- it thinks it needs to initialize the virtual
base class, even though said classes are abstract. I fix that by
providing a dummy constructor.
- In ReproducerInstrumentationTest, it is not able to deduce that the
TestingRegistry class is movable (it contains a map of unique
pointers). I change the type from Optional<TestingRegistry> to
unique_ptr<TestingRegistry), so that moving is not required
(copying/moving a polymorphic type is not a very good idea in any
case).
This patch adds two new dynamic register sets for AArch64 MTE and
Pointer Authentication features. These register sets are dynamic and
will only be available if underlying hardware support either of these
features. LLDB will pull in Aux vector information and create register
infos based on that information.
A follow up patch will add a test case to test these feature registers.
Reviewed By: labath, DavidSpickett
Differential Revision: https://reviews.llvm.org/D96460
This is patch adds support for adding dynamic register sets for
AArch64 dynamic features in LLDB. AArch64 has optional features like
SVE, Pointer Authentication and MTE which means LLDB needs to decide
at run time which registers it needs to pull in for the current
executable based on underlying support for a certain feature.
This patch makes necessary adjustments to make way for dynamic
register infos and dynamic register sets.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D96458
As discussed on lldb-dev
<https://lists.llvm.org/pipermail/lldb-dev/2021-March/016777.html> the
mips code is unmaintained and untested. It also carries a lot of
technical debt which is not limited to mips-specific code.
Generic mips support remains (and is going to be used by the upcoming
freebsd code). Resurrecting mips support should be a matter of re-adding
the relevant register context files (while avoiding reintroducing the
debt).
Split out the common base of Linux hardware breakpoint/watchpoint
support for AArch64 into a Utility class, and use it to implement
the matching support on FreeBSD.
Differential Revision: https://reviews.llvm.org/D96548
Introduce a minimal support for the 32-bit powerpc platform. This
includes support for GPR and FPR registers. I also needed to add
software breakpoint opcode for PPC32/PPC64 (big endian), and to fix
offsets in RegisterInfos_powerpc.h (used only by FreeBSD register
context to be globally unique rather than relative to each struct).
Differential Revision: https://reviews.llvm.org/D95947
Introduce mips64 support to match the legacy FreeBSD plugin. Similarly
to the legacy plugin, the code does not support FPU registers at the
moment. The support for them will be submitted separately as it
requires changes to the register context shared by both plugins.
This also includes software single-stepping support that is moved from
the Linux plugin into a common Utility class. The FreeBSD code also
starts explicitly ignoring EINVAL from PT_CLEARSTEP since this is easier
to implement than checking whether hardware single-stepping were used.
Differential Revision: https://reviews.llvm.org/D95802
Native register descriptions in LLDB specify lldb register numbers in
value_regs and invalidate_regs lists. These register numbers may not
match with Process gdb-remote register numbers which are generated by
native process after counting all registers in its register sets.
It was coincidentally not causing any problems as we never came across
a native target with dynamically changing register sets and register
numbers generated by counter matched with LLDB native register numbers.
This came up while testing target AArch64 SVE which can choose register
sets based on underlying hardware.
This patch fixes this behavior and always tries to use remote register
numbers while reading/writing registers over gdb-remote protocol.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D77043
This patch builds on previously submitted SVE patches regarding expedited
register set and per thread register infos. (D82853 D82855 and D82857)
We need to resize SVE register based on value received in expedited list.
Also we need to resize SVE registers when we write vg register using
register write vg command. The resize will result in a updated offset
for all of fpr and sve register set. This offset will be configured
in native register context by RegisterInfoInterface and will also be
be updated on client side in GDBRemoteRegisterContext.
A follow up patch will provide a API test to verify this change.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82863
This patch pull offset calculation logic out of DynamicRegisterInfo::Finalize
into a separate function. We are going to call this function whenever we
update SVE register sizes.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D94008
In gdb-remote process we have register infos defind as a refernce object of
GDBRemoteDynamicRegisterInfo class. In past register infos have remained
constant througout the life time of a process.
This has changed after AArch64 SVE support where register infos will have
per-thread configuration. SVE registers will have per-thread size and can
be updated while running. This patch aims to build up for that support by
changing GDBRemoteDynamicRegisterInfo reference to a shared pointer deinfed
per-thread.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82857
This patch carries forward our aim to remove offset field from qRegisterInfo
packets and XML register description. I have created a new function which
returns if offset fields are dynamic meaning client can calculate offset on
its own based on register number sequence and register size. For now this
function only returns true for NativeRegisterContextLinux_arm64 but we can
test this for other architectures and make it standard later.
As a consequence we do not send offset field from lldb-server (arm64 for now)
while other stubs dont have an offset field so it wont effect them for now.
On the client side we have replaced previous offset calculation algorithm
with a new scheme, where we sort all primary registers in increasing
order of remote regnum and then calculate offset incrementally.
This committ also includes a test to verify all of above functionality
on Arm64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91241
This came up while putting together our new strategy to create g/G packets
in compliance with GDB RSP protocol where register offsets are calculated in
increasing order of register numbers without any unused spacing.
RegisterInfoPOSIX_arm64::GPR size was being calculated after alignment
correction to 8 bytes which meant there was a 4 bytes unused space between
last gpr (cpsr) and first vector register V. We have put LLVM_PACKED_START
decorator on RegisterInfoPOSIX_arm64::GPR to make sure single byte
alignment is enforced. Moreover we are now doing to use arm64 user_pt_regs
struct defined in ptrace.h for accessing ptrace user registers.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D92063
This patch ovverides GetExpeditedRegisterSet for
NativeRegisterContextLinux_arm64 to send vector granule register in
expedited register set if SVE mode is selected.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82855
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
The Shell/Register tests now rely on the new behavior, and therefore
are run on non-Darwin systems only. The Python (API) test relies
on the legacy behavior, and is run on Darwin only.
Differential Revision: https://reviews.llvm.org/D91504
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
Differential Revision: https://reviews.llvm.org/D91504
The FXSAVE/XSAVE data can have two different layouts on x86_64. When
called as FXSAVE/XSAVE..., the Instruction Pointer and Address Pointer
registers are reported using a 16-bit segment identifier and a 32-bit
offset. When called as FXSAVE64/XSAVE64..., they are reported using
a complete 64-bit offsets instead.
LLDB has historically followed GDB and unconditionally used to assume
the 32-bit layout, with the slight modification of possibly
using a 32-bit segment register (i.e. extending the register into
the reserved 16 upper bits). When the underlying operating system used
FXSAVE64/XSAVE64..., the pointer was split into two halves,
with the upper half repored as the segment registers. While
reconstructing the full address was possible on the user end (and e.g.
the FPU register tests did that), it certainly was not the most
convenient option.
Introduce a two additional 'fip' and 'fdp' registers that overlap
with 'fiseg'/'fioff' and 'foseg'/'foff' respectively, and report
the complete 64-bit address.
Differential Revision: https://reviews.llvm.org/D91497
This moves in the direction of our effort to synchronize register descriptions
between LLDB and GDB xml description. We want to able to send registers in a
way that their offset fields can be re-constructed based on register sizes
in the increasing order of register number.
In context to Arm64 SVE, FPCR and FPSR are same registers in FPU regset and
SVE regset. Previously FPSR/FPCR offset was set at the end of SVE data
because Linux ptrace data placed FPCR and FPSR at the end of SVE register set.
Considering interoperability with other stubs like QEMU and that g packets
should generate register data in increasing order of register numbers. We
have to move FPCR/FPSR offset up to its original location according to
register numbering scheme of ARM64 registers with SVE registers included.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90741
In our recent discussion we are aiming to make LLDB registers exchange minimum
possible information in qRegisterInfo or XMl register descriptions.
For SVE registers, Z registers are catagorized as primary registers and should
not have any infomration about any pseudo registers. All pseudo registers
should have the information on which primary register they belong to.
This patch removes invalidate_regs list from Z registers and will mitigate its
impact on SVE resize patch in a follow up update.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91057
Use offset-based method to access x86 debug registers. This also
involves adding a test for the correctness of these offsets, and making
GetDR() method of NativeRegisterContextWatchpoint_x86 public to avoid
duplicate code.
Differential Revision: https://reviews.llvm.org/D91268
Fix Debug Register offsets to be specified relatively to UserArea
on FreeBSD/amd64 and FreeBSD/i386, and add them to UserArea on i386.
This fixes overlapping GPRs and DRs in gdb-remote protocol, making it
impossible to correctly get and set debug registers from the LLDB
client.
Differential Revision: https://reviews.llvm.org/D91254
Split the current NetBSD watchpoint implementation for x86 into Utility,
and revamp it to improve readability. This code is meant to be used
as a common class for all x86 watchpoint implementation, particularly
these on FreeBSD and Linux.
The code uses global watchpoint enable bits, as required by the NetBSD
kernel. If it ever becomes necessary for any platform to use local
enable bits instead, this can be trivially abstracted out.
The code also postpones clearing DR6 until a new different watchpoint
is being set in place of the old one. This is necessary since LLDB
repeatedly reenables watchpoints on all threads, by clearing
and restoring them. When DR6 is cleared as a part of that, then pending
events on other threads can no longer be associated with watchpoints
correctly.
Differential Revision: https://reviews.llvm.org/D89874
RegisterInfo's `reg_name`/`reg_alt_name` fields are C-Strings and are supposed
to only be generated from a ConstString. The reason for that is that
`DynamicRegisterInfo::GetRegisterInfo` and
`RegInfoBasedABI::GetRegisterInfoByName` try to optimise finding registers by
name by only comparing the C string pointer values instead of the underlying
strings. This only works if both C strings involved in the comparison come from
a ConstString. If one of the two C strings doesn't come from a ConstString the
comparison won't work (and most likely will silently fail).
I added an assert in b0060c3a78 which checks that
both strings come from a ConstString. Apparently not all ABI plugins are
generating their register names via ConstString, so this code is now not just
silently failing but also asserting.
In D88375 we did a shady fix for the MIPS plugins by just copying the
ConstString setup code to that plugin, but we still need to fix ABISysV_arc,
ABISysV_ppc and ABISysV_ppc64 plugins.
I would say we just fix the remaining plugins by removing the whole requirement
to have the register names coming from ConstStrings. I really doubt that we
actually save any time with the whole ConstString search trick (searching ~50
strings that have <4 characters doesn't sound more expensive than calling the
really expensive ConstString constructor + comparing the same amount of pointer
values). Also whatever small percentage of LLDB's runtime is actually spend in
this function is anyway not worth the complexity of this approach.
This patch just removes all this and just does a normal string comparison.
Reviewed By: JDevlieghere, labath
Differential Revision: https://reviews.llvm.org/D88490
Except for the few people actually debugging shells, stopping on a
SIGCONT doesn't add any value. And for people trying to run tests
under the debugger, stopping here is actively inconvenient. So this
patch switches the default behavior to not stop.
Differential Revision: https://reviews.llvm.org/D89019
Multiple fixes related to bugs discovered while debugging a crash
when reading all registers on i386.
The underlying problem was that GetSetForNativeRegNum() did not account
for MPX registers on i386, and since it only compared against upper
bounds of each known register set, the MPX registers were classified
into the wrong set and therefore considered supported. However, they
were not expected in RegNumX86ToX86_64() and caused the assertion
to fail.
This includes:
- adding (unused) i386 → x86_64 translations for MPX registers
- fixing GetSetForNativeRegNum() to check both lower and upper bound
for register sets, to avoid wrongly classifying unhandled register
sets
- adding missing range check for MPX registers on i386
- renaming k_last_mpxr to k_last_mpxr_i386 for consistency
- replacing return-assertions with llvm_unreachable() and adding more
checks for unexpected parameters
Differential Revision: https://reviews.llvm.org/D88682
This patch removes register set definitions and other redundant code from
NativeRegisterContextLinux/RegisterContextPOSIX*_arm. Register sets are now
moved under RegisterInfosPOSIX_arm which now uses RegisterInfoAndSetInterface.
This is similar to what we earlier did for AArch64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D86962
This patch adds NativeRegisterContext_arm64 ptrace routines to access
AArch64 SVE register set. This patch also adds a test-case to test
AArch64 SVE register access and dynamic size configuration capability.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D79699
This patch updates LLDB's in house version of SVE ptrace/sig macros by
converting them into constants and inlines. They are housed under sve
namespace and are used by process elf-core for reading SVE register data.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85641
This patch fixes build on lldb-x64-windows-ninja. The error is caused by
use of two leading underscores.
According to MSVC documentation:
In Microsoft C++, identifiers with two leading underscores are reserved
for compiler implementations.
https://docs.microsoft.com/en-us/cpp/cpp/keywords-cpp?view=vs-2019
LinuxPTraceDefines_arm64sve.h defines essential macros for manipulating
AArch64 SVE core dump registers. Add guard for aarch64/Linux hosts where
newer versions of ptrace.h or sigcontext.h might already define SVE macros.
Differential Revision: https://reviews.llvm.org/D83541
Summary:
This patch adds support for AArch64 SVE register infos description and
core file register access.
AArch64 SVE is a an optional extension of Arm v8.3-a architecture. It
has introduced 32 new vector registers Z, 16 predicate P registers and FFR
predicate register. These registers have fixed names but can dynamically
be configured to different size based on underlying OS configuration.
This patch adds register info struct that describes SVE register infos and
also provides RegisterContextPOSIXCore_arm64 routines to access SVE registers.
This patch also introduces a mechanism to configure SVE register sizes and
offsets at startup before exchanging register information across gdb-remote.
TestLinuxCore.py has been updated to include testing of SVE core files.
Reviewers: labath, clayborg, jankratochvil, jasonmolenda, rengolin
Reviewed By: labath
Subscribers: tschuett, kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77047
Summary:
SVE elf note data requires SVE PT macros for reading writing data. Same macros are used by Linux ptrace SVE register access.
This patch makes necessary changes to lldb/source/Plugins/Process/Linux/LinuxPTraceDefines_arm64sve.h in order to make them sysroot independent.
Reviewers: labath, rengolin
Reviewed By: labath
Subscribers: tschuett, lldb-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D83541
Summary:
This patch removes dependence of RegisterContextPOSIX_arm64 on register number enums defined in lldb-arm64-register-enums.h.
RegisterContextPOSIX_arm64 makes use of helper functions to access register numbers defined in RegisterInfos_arm64.h via RegisterInfosPOSIX_arm64.
Reviewers: labath
Reviewed By: labath
Subscribers: emaste, kristof.beyls, arphaman, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D83753
These were found by Clang's new -Wsuggest-override.
This patch doesn't touch any code in unittests/, since much of it intentionally doesn't use override to avoid massive warning spam from -Winconsistent-missing-override due to the use of MOCK_*** macros.
Differential Revision: https://reviews.llvm.org/D83847
Summary:
This patch adds some cosmetic changes to LLDB AArch64 register infos macros in order to use them in SVE register infos struct in follow up patches.
This patch initially added invalidate lists to register infos struct but that is no longer needed and problem disappeared after updating qemu testing environment.
old headline comments for reference:
AArch64 reigster X and V registers are primary GPR and vector registers respectively. If these registers are modified their corresponding children w regs or s/d regs should be invalidated. Specially when a register write fails it is important that failure gets reflected to all the registers which draw their value from a particular value register.
Reviewers: labath, rengolin
Reviewed By: labath
Subscribers: tschuett, kristof.beyls, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D77045
Summary:
This patch aims to combine similar arm64 register set definitions defined in NativeRegisterContextLinux_arm64 and RegisterContextPOSIX_arm64.
I have implemented a register set interface out of RegisterInfoInterface class and moved arm64 register sets into RegisterInfosPOSIX_arm64 which is similar to Utility/RegisterContextLinux_* implemented by various other targets. This will help in managing register sets of new ARM64 architecture features in one place.
Built and tested on x86_64-linux-gnu, aarch64-linux-gnu and arm-linux-gnueabihf targets.
Reviewers: labath
Reviewed By: labath
Subscribers: mhorne, emaste, kristof.beyls, atanasyan, danielkiss, lldb-commits
Differential Revision: https://reviews.llvm.org/D80105
Summary:
This patch aims to remove multiple copies of GetByteOrder() and ConvertRegisterKindToRegisterNumber used in various versions of RegisterContextPOSIX_*.
Both register implementations are move to RegisterContext class which is parent of RegisterContextPOSIX_* classes.
Built and tested on x86_64-linux-gnu, aarch64-linux-gnu and arm-linux-gnueabihf targets.
Reviewers: labath
Reviewed By: labath
Subscribers: wuzish, nemanjai, kristof.beyls, kbarton, atanasyan, lldb-commits
Differential Revision: https://reviews.llvm.org/D80104
Muhammad Omair Javaid