an executable file if it is right next to a dSYM file that is found using
DebugSymbols. The code also looks into a bundle if the dSYM file is right
next to a bundle.
Modified the MacOSX kernel dynamic loader plug-in to correctly set the load
address for kext sections. This is a tad tricky because of how LLDB chooses
to treat mach-o segments with no name. Also modified the loader to properly
handle the older version 1 kext summary info.
Fixed a crasher in the Mach-o object file parser when it is trying to set
the section size correctly for dSYM sections.
Added packet dumpers to the CommunicationKDP class. We now also properly
detect address byte sizes based on the cpu type and subtype that is provided.
Added a read memory and read register support to CommunicationKDP. Added a
ThreadKDP class that now uses subclasses of the RegisterContextDarwin_XXX for
arm, i386 and x86_64.
Fixed some register numbering issues in the RegisterContextDarwin_arm class
and added ARM GDB numbers to the ARM_GCC_Registers.h file.
Change the RegisterContextMach_XXX classes over to subclassing their
RegisterContextDarwin_XXX counterparts so we can share the mach register
contexts between the user and kernel plug-ins.
llvm-svn: 135466
invoking the Read(...) method to read in bytes. This seems to fix the infinite looping
I was seeing on SnowLeopard while running the test suite.
llvm-svn: 135461
method so process plug-ins that are requested by name can answer yes when
asked if they can debug a target that might not have any file in the target.
Modified the ConnectionFileDescriptor to have both a read and a write file
descriptor. This allows us to support UDP, and eventually will allow us to
support pipes. The ConnectionFileDescriptor class also has a file descriptor
type for each of the read and write file decriptors so we can use the correct
read/recv/recvfrom call when reading, or write/send/sendto for writing.
Finished up an initial implementation of UDP where you can use the "udp://"
URL to specify a host and port to connect to:
(lldb) process connect --plugin kdp-remote udp://host:41139
This will cause a ConnectionFileDescriptor to be created that can send UDP
packets to "host:41139", and it will also bind to a localhost port that can
be given out to receive the connectionless UDP reply.
Added the ability to get to the IPv4/IPv6 socket port number from a
ConnectionFileDescriptor instance if either file descriptor is a socket.
The ProcessKDP can now successfully connect to a remote kernel and detach
using the above "processs connect" command!!! So far we have the following
packets working:
KDP_CONNECT
KDP_DISCONNECT
KDP_HOSTINFO
KDP_VERSION
KDP_REATTACH
Now that the packets are working, adding new packets will go very quickly.
llvm-svn: 135363
Implemented connect, disconnect, reattach, version, and hostinfo.
Modified the ConnectionFileDescriptor class to be able to handle UDP.
Added a new Stream subclass called StreamBuffer that is backed by a
llvm::SmallVector for better efficiency.
Modified the DataExtractor class to have a static function that can
dump hex bytes into a stream. This is currently being used to dump incoming
binary packet data in the KDP plug-in.
llvm-svn: 135338
same as the old "connect://<host>:<port>". Also added the ability to
connect using "udp://<host>:<port>" which will open a connected
datagram socket. I need to find a way to specify a non connected
datagram socket as well.
We might need to start setting some settings in the URL itself,
maybe something like:
udp://<host>:<port>?connected=yes
udp://<host>:<port>?connected=no
I am open to suggestions for URL settings.
Also did more work on the KDP darwin kernel plug-in.
llvm-svn: 135277
- you can use a Python script to write a summary string for data-types, in one of
three ways:
-P option and typing the script a line at a time
-s option and passing a one-line Python script
-F option and passing the name of a Python function
these options all work for the "type summary add" command
your Python code (if provided through -P or -s) is wrapped in a function
that accepts two parameters: valobj (a ValueObject) and dict (an LLDB
internal dictionary object). if you use -F and give a function name,
you're expected to define the function on your own and with the right
prototype. your function, however defined, must return a Python string
- test case for the Python summary feature
- a few quirks:
Python summaries cannot have names, and cannot use regex as type names
both issues will be fixed ASAP
major redesign of type summary code:
- type summary working with strings and type summary working with Python code
are two classes, with a common base class SummaryFormat
- SummaryFormat classes now are able to actively format objects rather than
just aggregating data
- cleaner code to print descriptions for summaries
the public API now exports a method to easily navigate a ValueObject hierarchy
New InputReaderEZ and PriorityPointerPair classes
Several minor fixes and improvements
llvm-svn: 135238
variables prior to running your binary. Zero filled sections now get
section data correctly filled with zeroes when Target::ReadMemory
reads from the object file section data.
Added new option groups and option values for file lists. I still need
to hook up all of the options to "target variable" to allow more complete
introspection by file and shlib.
Added the ability for ValueObjectVariable objects to be created with
only the target as the execution context. This allows them to be read
from the object files through Target::ReadMemory(...).
Added a "virtual Module * GetModule()" function to the ValueObject
class. By default it will look to the parent variable object and
return its module. The module is needed when we have global variables
that have file addresses (virtual addresses that are specific to
module object files) and in turn allows global variables to be displayed
prior to running.
Removed all of the unused proxy object support that bit rotted in
lldb_private::Value.
Replaced a lot of places that used "FileSpec::Compare (lhs, rhs) == 0" code
with the more efficient "FileSpec::Equal (lhs, rhs)".
Improved logging in GDB remote plug-in.
llvm-svn: 134579
instructions if they are conditional. Also fixed issues where the PC wasn't
getting bit zero stripped for ARM targets when a stack frame was thumb. We
now properly call through the GetOpcodeLoadAddress() functions to make sure
the addresses are properly stripped for any targets that may decorate up
their addresses.
We now don't pass the SIGSTOP signals along. We can revisit this soon, but
currently this was interfering with debugging some older ARM targets that
don't have vCont support in the GDB server.
llvm-svn: 134461
a file or socket. We now make a getsockopt call to check if the fd is a socket.
Also, the previous logic in the GDB communication needs to watch for success
with an error so we can deal with EAGAIN and other normal "retry" error codes.
llvm-svn: 134359
_only_ in the resulting stream, not in the error objects (lldb_private::Error).
lldb_private::Error objects should always just have an error string with no
terminating newline characters or periods.
Fixed an issue with GDB remote packet detection that could end up deadlocking
if a full packet wasn't received in one chunk. Also modified the packet
checking function to properly toss one or more bytes when it detects bad
data.
llvm-svn: 134357
connected process connection.
Also added support for more kinds of continue packet when multiple threads
need to continue where some want to continue with signals.
llvm-svn: 133785
libraries and headers exist. This can be specified using the platform select
function:
platform select --sysroot /Volumes/remote-root remote-macosx
Each platform subclass is free to interpret the sysroot as needed.
Expose the new SDK root directory through the SBDebugger class.
Fixed an issue with the GDB remote protocol where unimplemented packets were
not being handled correctly.
llvm-svn: 133231
darwin (not sure about other platforms).
Modified the communication and connection classes to not require the
BytesAvailable function. Now the "Read(...)" function has a timeout in
microseconds.
Fixed a lot of assertions that were firing off in certain cases and replaced
them with error output and code that can deal with the assertion case.
llvm-svn: 133224
virtual bool
ABI::StackUsesFrames () = 0;
Should return true if your ABI uses frames when doing stack backtraces. This
means a frame pointer is used that points to the previous stack frame in some
way or another.
virtual bool
ABI::CallFrameAddressIsValid (lldb::addr_t cfa) = 0;
Should take a look at a call frame address (CFA) which is just the stack
pointer value upon entry to a function. ABIs usually impose alignment
restrictions (4, 8 or 16 byte aligned), and zero is usually not allowed.
This function should return true if "cfa" is valid call frame address for
the ABI, and false otherwise. This is used by the generic stack frame unwinding
code to help determine when a stack ends.
virtual bool
ABI::CodeAddressIsValid (lldb::addr_t pc) = 0;
Validates a possible PC value and returns true if an opcode can be at "pc".
Some ABIs or architectures have fixed width instructions and must be aligned
to a 2 or 4 byte boundary. "pc" can be an opcode or a callable address which
means the load address might be decorated with extra bits (such as bit zero
to indicate a thumb function call for ARM targets), so take this into account
when returning true or false. The address should also be validated to ensure
it is a valid address for the address size of the inferior process. 32 bit
targets should make sure the address is less than UINT32_MAX.
Modified UnwindLLDB to use the new ABI functions to help it properly terminate
stacks.
Modified the mach-o function that extracts dependent files to not resolve the
path as the paths inside a binary might not match those on the current
host system.
llvm-svn: 132021
parse NOP instructions. I added the new table entries for the NOP for the
plain NOP, Yield, WFE, WFI, and SEV variants. Modified the opcode emulation
function EmulateInstructionARM::EmulateMOVRdSP(...) to notify us when it is
creating a frame. Also added an abtract way to detect the frame pointer
register for both the standard ARM ABI and for Darwin.
Fixed GDBRemoteRegisterContext::WriteAllRegisterValues(...) to correctly be
able to individually write register values back if case the 'G' packet is
not implemented or returns an error.
Modified the StopInfoMachException to "trace" stop reasons. On ARM we currently
use the BVR/BCR register pairs to say "stop when the PC is not equal to the
current PC value", and this results in a EXC_BREAKPOINT mach exception that
has 0x102 in the code.
Modified debugserver to create the short option string from long option
definitions to make sure it doesn't get out of date. The short option string
was missing many of the newer short option values due to a modification of
the long options defs, and not modifying the short option string.
llvm-svn: 131911
and set the address as an opcode address or as a callable address. This is
needed in various places in the thread plans to make sure that addresses that
might be found in symbols or runtime might already have extra bits set (ARM/Thumb).
The new functions are:
bool
Address::SetCallableLoadAddress (lldb::addr_t load_addr, Target *target);
bool
Address::SetOpcodeLoadAddress (lldb::addr_t load_addr, Target *target);
SetCallableLoadAddress will initialize a section offset address if it can,
and if so it might possibly set some bits in the address to make the address
callable (bit zero might get set for ARM for Thumb functions).
SetOpcodeLoadAddress will initialize a section offset address using the
specified target and it will strip any special address bits if needed
depending on the target.
Fixed the ABIMacOSX_arm::GetArgumentValues() function to require arguments
1-4 to be in the needed registers (previously this would incorrectly fallback
to the stack) and return false if unable to get the register values. The
function was also modified to first look for the generic argument registers
and then fall back to finding the registers by name.
Fixed the objective trampoline handler to use the new Address::SetOpcodeLoadAddress
function when needed to avoid address mismatches when trying to complete
steps into objective C methods. Make similar fixes inside the
AppleThreadPlanStepThroughObjCTrampoline::ShouldStop() function.
Modified ProcessGDBRemote::BuildDynamicRegisterInfo(...) to be able to deal with
the new generic argument registers.
Modified RNBRemote::HandlePacket_qRegisterInfo() to handle the new generic
argument registers on the debugserver side.
Modified DNBArchMachARM::NumSupportedHardwareBreakpoints() to be able to
detect how many hardware breakpoint registers there are using a darwin sysctl.
Did the same for hardware watchpoints in
DNBArchMachARM::NumSupportedHardwareWatchpoints().
llvm-svn: 131834
the "payload_length" argument for the "payload" packet data. This meant we
could end up sending random extra data with a packet depending on how the
packet was constructed.
Fixed GDBRemoteRegisterContext to properly save and restore all registers.
Previous fixes had been added to work around the "payload_length" issues fixed
above and aren't needed anymore.
Fix logging in GDBRemoteCommunication to make sure we log the correct packet
data being sent by using the packet length when dumping the packet contents.
Added register definitions for 'arm-lldb' in the "disasm-gdb-remote.pl" script
so if you have a register dump from the GDB remote that doesn't include the
qRegisterInfo packets, you can manually tell the script which registers are
which.
llvm-svn: 131715
Removed ifdeffed out functions and added the implementation of
WriteRegister for x86_64 architecture.
Signed-off-by: Johnny Chen <johnny.chen@apple.com>
llvm-svn: 131696
Fixed ThreadPlanCallFunction::ReportRegisterState(...) to only dump when
verbose logging is enabled and fixed the function to use the new
RegisterValue method of reading registers.
Fixed the GDB remote client to not send a continue packet after receiving
stdout or stderr from the inferior process.
llvm-svn: 131628
bool
Address::SetLoadAddress (lldb::addr_t load_addr, Target *target);
Added an == and != operator to RegisterValue.
Modified the ThreadPlanTracer to use RegisterValue objects to store the
register values when single stepping. Also modified the output to be a bit
less wide.
Fixed the ABIMacOSX_arm to not overwrite stuff on the stack. Also made the
trivial function call be able to set the ARM/Thumbness of the target
correctly, and also sets the return value ARM/Thumbness.
Fixed the encoding on the arm s0-s31 and d16 - d31 registers when the default
register set from a standard GDB server register sets.
llvm-svn: 131517
all register values. There is some junk that was appearing at the end
of the result the 'g' packet (read all register values). This function
was being called in:
bool
GDBRemoteRegisterContext::ReadAllRegisterValues (lldb::DataBufferSP &data_sp)
Then the packet data for the 'G' packet (write all registers) was being
placed into "data_sp" so the:
bool
GDBRemoteRegisterContext::WriteAllRegisterValues (const lldb::DataBufferSP &data_sp)
could restore it. In attempting to clean up the extra junk at the end of this
packet data, the packet was getting truncated.
llvm-svn: 131468
Modified ClangUserExpression and ClangUtilityFunction to display the actual
error (if one is available) that made the JIT fail instead of a canned
response.
Fixed the restoring of all register values when the 'G' packet doesn't work
to use the correct data.
llvm-svn: 131454
over when running JITed expressions. The allocated memory cache will cache
allocate memory a page at a time for each permission combination and divvy up
the memory and hand it out in 16 byte increments.
llvm-svn: 131453
Peter Collingbourne