This removes the duplicate HVX instruction set for the 128-byte mode.
Single instruction set now works for both modes (64- and 128-byte).
llvm-svn: 313362
It used to return the actual field value from the instruction descriptor.
There is no reason for that, that value is not interesting in any way and
the specifics of its encoding in the descriptor should not be exposed.
llvm-svn: 313257
The check (assuming positive stride) for validity of memmove should be
(a) the destination is at a lower address than the source, or
(b) the distance between the source and destination is greater than or
equal the number of bytes copied.
For the second part it is sufficient to assume that the destination
is at a higher address, since the opposite case is covered by (a).
The distance calculation was previously done by subtracting the
pointers in the wrong order.
llvm-svn: 311650
The liveness-tracking code assumes that the registers that were saved
in the function's prolog are live outside of the function. Specifically,
that registers that were saved are also live-on-exit from the function.
This isn't always the case as illustrated by the LR register on ARM.
Differential Revision: https://reviews.llvm.org/D36160
llvm-svn: 310619
IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
llvm-svn: 309911
Certain operations require vector of i1 values. However, for Hexagon
architecture compatibility, they need to be represented as vector of i8.
Patch by Suyog Sarda.
llvm-svn: 309677
Summary:
Since r293359, most dump() function are only defined when
`!defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)` holds. print() functions
only used by dump() functions are now unused in release builds,
generating lots of warnings. This patch only defines some print()
functions if they are used.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: arsenm, mzolotukhin, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D35949
llvm-svn: 309553
Summary:
This silences a couple of implicit fallthrough warnings with GCC 7.1 in
this file.
Reviewers: colinl, kparzysz
Reviewed By: kparzysz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35889
llvm-svn: 309129
Changing mask argument type from const SmallVectorImpl<int>& to
ArrayRef<int>.
This came up in D35700 where a mask is received as an ArrayRef<int> and
we want to pass it to TargetLowering::isShuffleMaskLegal().
Also saves a few lines of code.
llvm-svn: 309085
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
The flag "-hexagon-emit-lut-text" (defaulted to false) is added to decide
on where to keep the switch generated lookup table.
Differential Revision: https://reviews.llvm.org/D34818
llvm-svn: 308316
The target-independent lowering works fine, except concatenating 32-bit
words. Add a pattern to generate A2_combinew instead of 64-bit asl/or.
llvm-svn: 308186
This is the LLVM part, adding definitions for
void @llvm.hexagon.Y2.dccleana(i8*)
void @llvm.hexagon.Y2.dccleaninva(i8*)
void @llvm.hexagon.Y2.dcinva(i8*)
void @llvm.hexagon.Y2.dczeroa(i8*)
void @llvm.hexagon.Y4.l2fetch(i8*, i32)
void @llvm.hexagon.Y5.l2fetch(i8*, i64)
The clang part will follow.
llvm-svn: 308032
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
The llvm flag "-hexagon-emit-lookup-tables" guards the generation
of lookup table generated from a switch statement.
Differential Revision: https://reviews.llvm.org/D34819
llvm-svn: 306877
This patch adds a new LLVM flag -hexagon-emit-jt-text which is defaulted to
"false". The value "true" emits the switch generated jump tables in text section.
Differential Revision: https://reviews.llvm.org/D34820
llvm-svn: 306872
The llvm flag "-hexagon-emit-lookup-tables" guards the generation
of lookup table from a switch statement.
Differential Revision: https://reviews.llvm.org/D34819
llvm-svn: 306869
The changes are a result of discussion of https://reviews.llvm.org/D33685.
It solves the following problem:
1. We can inform getGEPCost about simplified indices to help it with
calculating the cost. But getGEPCost does not take into account the
context which GEPs are used in.
2. We have getUserCost which can take the context into account but we cannot
inform about simplified indices.
With the changes getUserCost will have access to additional information
as getGEPCost has.
The one parameter getUserCost is also provided.
Differential Revision: https://reviews.llvm.org/D34057
llvm-svn: 306674
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
It causes an extra pass of the machine verifier to be added to the pass
manager, and causes test/CodeGen/Generic/llc-start-stop.ll to fail.
llvm-svn: 306140
The feeder instruction will be moved to right before the compare, so
the updating code should not be looking for kills past the compare.
llvm-svn: 306059
The second part of r305300: when placing the mux at the later location,
make sure that it won't use any register that was killed between the
two original instructions. Remove any such kills and transfer them to
the mux.
llvm-svn: 305553
Store-immediate instructions have a non-extendable offset. Since the
actual offset for a stack object is not known until much later, only
generate these stores when the stack size (at the time of instruction
selection) is small.
llvm-svn: 305305
When a mux instruction is created from a pair of complementary conditional
transfers, it can be placed at the location of either the earlier or the
later of the transfers. Since it will use the operands of the original
transfers, putting it in the earlier location may hoist a kill of a source
register that was originally further down. Make sure the kill flag is
removed if the register is still used afterwards.
llvm-svn: 305300
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
The initial assumption was that the simplification would converge to a
fixed point relatvely quickly. Turns out that there are legitimate situa-
tions where the complexity of the code causes it to take a large number
of iterations.
Two main changes:
- Instead of aborting upon hitting the limit, simply return nullptr.
- Reduce the limit to 10,000 from 100,000.
llvm-svn: 304441
TargetPassConfig is not useful for targets that do not use the CodeGen
library, so we may just as well store a pointer to an
LLVMTargetMachine instead of just to a TargetMachine.
While at it, also change the constructor to take a reference instead of a
pointer as the TM must not be nullptr.
llvm-svn: 304247
For multiplications of 64-bit values (giving 64-bit result), detect
cases where the arguments are sign-extended 32-bit values, on a per-
operand basis. This will allow few patterns to match a wider variety
of combinations in which extensions can occur.
llvm-svn: 304223
Summary:
Currently FPOWI defaults to Legal and LegalizeDAG.cpp turns Legal into Expand for this opcode because Legal is a "lie".
This patch changes the default for this opcode to Expand and removes the hack from LegalizeDAG.cpp. It also removes all the code in the targets that set this opcode to Expand themselves since they can just rely on the default.
Reviewers: spatel, RKSimon, efriedma
Reviewed By: RKSimon
Subscribers: jfb, dschuff, sbc100, jgravelle-google, nemanjai, javed.absar, andrew.w.kaylor, llvm-commits
Differential Revision: https://reviews.llvm.org/D33530
llvm-svn: 304215
Summary:
Implements PR889
Removing the virtual table pointer from Value saves 1% of RSS when doing
LTO of llc on Linux. The impact on time was positive, but too noisy to
conclusively say that performance improved. Here is a link to the
spreadsheet with the original data:
https://docs.google.com/spreadsheets/d/1F4FHir0qYnV0MEp2sYYp_BuvnJgWlWPhWOwZ6LbW7W4/edit?usp=sharing
This change makes it invalid to directly delete a Value, User, or
Instruction pointer. Instead, such code can be rewritten to a null check
and a call Value::deleteValue(). Value objects tend to have their
lifetimes managed through iplist, so for the most part, this isn't a big
deal. However, there are some places where LLVM deletes values, and
those places had to be migrated to deleteValue. I have also created
llvm::unique_value, which has a custom deleter, so it can be used in
place of std::unique_ptr<Value>.
I had to add the "DerivedUser" Deleter escape hatch for MemorySSA, which
derives from User outside of lib/IR. Code in IR cannot include MemorySSA
headers or call the MemoryAccess object destructors without introducing
a circular dependency, so we need some level of indirection.
Unfortunately, no class derived from User may have any virtual methods,
because adding a virtual method would break User::getHungOffOperands(),
which assumes that it can find the use list immediately prior to the
User object. I've added a static_assert to the appropriate OperandTraits
templates to help people avoid this trap.
Reviewers: chandlerc, mehdi_amini, pete, dberlin, george.burgess.iv
Reviewed By: chandlerc
Subscribers: krytarowski, eraman, george.burgess.iv, mzolotukhin, Prazek, nlewycky, hans, inglorion, pcc, tejohnson, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D31261
llvm-svn: 303362
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
llvm-svn: 303360
This patch adds min/max population count, leading/trailing zero/one bit counting methods.
The min methods return answers based on bits that are known without considering unknown bits. The max methods give answers taking into account the largest count that unknown bits could give.
Differential Revision: https://reviews.llvm.org/D32931
llvm-svn: 302925
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
Allocframe and the following stores on the stack have a latency of 2 cycles
when not in the same packet. This happens because R29 is needed early by the
store instruction. Since one of such stores can be packetized along with
allocframe and use old value of R29, we can assign it 0 cycle latency
while leaving latency of other stores to the default value of 2 cycles.
Patch by Jyotsna Verma.
llvm-svn: 302034
The packetizer needs to convert .cur instruction to its regular form if
the use is not in the same packet as the .cur. The code in the packetizer
handles one type of .cur, which is the vector load case. This patch
updates the packetizer so that it can undo all the .cur instructions.
In the test case, the .cur is the 128B version, but there are also the
post-increment versions.
Patch by Brendon Cahoon.
llvm-svn: 302032
The compiler was generating code that ends up ignoring a multiple
latency dependence between two instructions by scheduling the
intructions in back-to-back packets.
The packetizer needs to end a packet if the latency of the current
current insruction and the source in the previous packet is
greater than 1 cycle. This case occurs when there is still room in
the current packet, but scheduling the instruction causes a stall.
Instead, the packetizer should start a new packet. Also, if the
current packet already contains a stall, then it is okay to add
another instruction to the packet that also causes a stall. This
occurs when there are no instructions that can be scheduled in
between the producer and consumer instructions.
This patch changes the latency for loads to 2 cycles from 3 cycles.
This change refects that a load only needs to be separated by
one extra packet to eliminate the stall.
Patch by Ikhlas Ajbar.
llvm-svn: 301954
This eliminates many extra 'Idx' induction variables in loops over
arguments in CodeGen/ and Target/. It also reduces the number of places
where we assume that ReturnIndex is 0 and that we should add one to
argument numbers to get the corresponding attribute list index.
NFC
llvm-svn: 301666
This patch introduces a new KnownBits struct that wraps the two APInt used by computeKnownBits. This allows us to treat them as more of a unit.
Initially I've just altered the signatures of computeKnownBits and InstCombine's simplifyDemandedBits to pass a KnownBits reference instead of two separate APInt references. I'll do similar to the SelectionDAG version of computeKnownBits/simplifyDemandedBits as a separate patch.
I've added a constructor that allows initializing both APInts to the same bit width with a starting value of 0. This reduces the repeated pattern of initializing both APInts. Once place default constructed the APInts so I added a default constructor for those cases.
Going forward I would like to add more methods that will work on the pairs. For example trunc, zext, and sext occur on both APInts together in several places. We should probably add a clear method that can be used to clear both pieces. Maybe a method to check for conflicting information. A method to return (Zero|One) so we don't write it out everywhere. Maybe a method for (Zero|One).isAllOnesValue() to determine if all bits are known. I'm sure there are many other methods we can come up with.
Differential Revision: https://reviews.llvm.org/D32376
llvm-svn: 301432
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
This reverts commit r301105, 4, 3 and 1, as a follow up of the previous
revert, which broke even more bots.
For reference:
Revert "[APInt] Use operator<<= where possible. NFC"
Revert "[APInt] Use operator<<= instead of shl where possible. NFC"
Revert "[APInt] Use ashInPlace where possible."
PR32754.
llvm-svn: 301111
getRawData exposes the internal type of the APInt class directly to its users. Ideally we wouldn't expose such an implementation detail.
This patch fixes a few of the easy cases by using truncate, extract, or a rotate.
llvm-svn: 301105
Also, make a few changes to allow using the pass in .mir testcases.
Among other things, change the abbreviation from opt-amode to amode-opt,
because otherwise lit would expand the "opt" part to the full path to
the opt binary.
llvm-svn: 300707
From a user prospective, it forces the use of an annoying nullptr to mark the end of the vararg, and there's not type checking on the arguments.
The variadic template is an obvious solution to both issues.
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299949
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
llvm-svn: 299925
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
This moves the isMask and isShiftedMask functions to be class methods. They now use the MathExtras.h function for single word size and leading/trailing zeros/ones or countPopulation for the multiword size. The previous implementation made multiple temorary memory allocations to do the bitwise arithmetic operations to match the MathExtras.h implementation.
Differential Revision: https://reviews.llvm.org/D31565
llvm-svn: 299362
- Avoid explosive growth of the simplification queue by not queuing
expressions that are alredy in it.
- Add an iteration counter and abort after a sufficiently large number
of iterations (assuming that it's a symptom of an infinite loop).
llvm-svn: 298655
[Hexagon] Recognize polynomial-modulo loop idiom again
Regain the ability to recognize loops calculating polynomial modulo
operation. This ability has been lost due to some changes in the
preceding optimizations. Add code to preprocess the IR to a form
that the pattern matching code can recognize.
llvm-svn: 298400
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Regain the ability to recognize loops calculating polynomial modulo
operation. This ability has been lost due to some changes in the
preceding optimizations. Add code to preprocess the IR to a form
that the pattern matching code can recognize.
llvm-svn: 298282
This function will find the closest ref node aliased to Reg that is
in an instruction preceding Inst. This could be used to identify the
hypothetical reaching def of Reg, if Reg was a member of Inst.
llvm-svn: 297524
- Fix the insertion point, which occasionally could have been incorrect.
- Avoid creating multiple bitsplits with the same operands, if an old one
could be reused.
llvm-svn: 297414
When extracting a bitfield from the high register in a register pair,
the final offset should be relative to the high register (for 32-bit
extracts).
llvm-svn: 297288
Merge the tail block into the loop in cases where the main loop body
exits early, subject to profitability constraints. This will coalesce
the loop body into fewer blocks.
For example:
loop: loop:
// loop body // loop body
if (...) jump exit --> // more body
more: if (...) jump exit
// more body jump loop
jump loop
llvm-svn: 297033
The code in updateDeadFlags removed unnecessary <dead> flags, but there
can be cases where such a flag is not set, and yet a register has become
dead. For example, if a mux with identical inputs is replaced with a COPY,
the predicate register may no longer be used after that.
llvm-svn: 297032
On Hexagon, values of type i1 are passed in registers of type i32,
even though i1 is not a legal value for these registers. This is a
special case and needs special handling to maintain consistency of
the lowering information.
This fixes PR32089.
llvm-svn: 296645
In the bit tracker, references to other bit values in which the register
is 0 are prohibited. This means that generating self-referential register
cells like { w:32 [0-15]:s[0-15] [16-31]:s[15] } is impossible. In order
to get a self-referential cell, it had to be stored into a map and then
reloaded from it. To avoid this step, add a function that will set the
register to a given value without going through the map.
llvm-svn: 296025
Defining nodes should not alias with one another, while clobbering
nodes can. When pushing defs on stacks, push clobbers first, link
non-clobbering defs, then push the defs.
The data flow in a statement is now: uses -> clobbers -> defs.
llvm-svn: 295356
Summary:
Convert all obvious node_begin/node_end and child_begin/child_end
pairs to range based for.
Sending for review in case someone has a good idea how to make
graph_children able to be inferred. It looks like it would require
changing GraphTraits to be two argument or something. I presume
inference does not happen because it would have to check every
GraphTraits in the world to see if the noderef types matched.
Note: This change was 3-staged with clang as well, which uses
Dominators/etc from LLVM.
Reviewers: chandlerc, tstellarAMD, dblaikie, rsmith
Subscribers: arsenm, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D29767
llvm-svn: 294620
Changes include:
- Updates to the instruction descriptor flags.
- Improvements to the packet shuffler and checker.
- Updates to the handling of certain relocations.
- Better handling of duplex instructions.
llvm-svn: 294226
Technically, this is actually changes the expression and the original
assert was "wrong", but since the conjunction is with true, it doesn't
matter in this case.
llvm-svn: 293709
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
When calculating kills, a register may be considered live because a part
of it is live, but if there is a use of that (whole) register, the whole
register (and its subregisters) need to be added to the live set.
llvm-svn: 292845
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Include of llvm/IR/Verifier.h was removed from HexagonCommonGEP.cpp in r289604
as unused. In fact it is required when expensive checks are enabled, because
it declared function `verifyFunction`, which is called in conditionally compiled
part of the file.
llvm-svn: 290170
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.
Differential Revision: https://reviews.llvm.org/D27454
llvm-svn: 289820
This was exposed by some code that used more than one level of sub-
registers. There is no testcase, because there is no such code in the
Hexagon backend.
llvm-svn: 289099
As proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/106640.html
This is for a couple of reasons:
- Values of type PointerType are unlike the other SequentialTypes (arrays
and vectors) in that they do not hold values of the element type. By moving
PointerType we can unify certain aspects of how the other SequentialTypes
are handled.
- PointerType will have no place in the SequentialType hierarchy once
pointee types are removed, so this is a necessary step towards removing
pointee types.
Differential Revision: https://reviews.llvm.org/D26595
llvm-svn: 288462
This is per function data so it is better kept at the function instead
of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27185
llvm-svn: 288291
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
llvm-svn: 287439
The previously used "names" are rather descriptions (they use multiple
words and contain spaces), use short programming language identifier
like strings for the "names" which should be used when exporting to
machine parseable formats.
Also removed a unused TimerGroup from Hexxagon.
Differential Revision: https://reviews.llvm.org/D25583
llvm-svn: 287369
The Stack slot coloring pass removes a store that is followed by a load
that deal with the same stack slot. The function isLoadFromStackSlot
is supposed to consider the loads that have no side-effects. This
patch fixed the issue by removing the unsafe loads from this function
Eg:
%vreg0<def> = L2_loadruh_io <fi#15>, 0
S2_storeri_io <fi#15>, 0, %vreg0
In this case, we load an unsigned extended half word and store this in to
the same stack slot. The Stack slot coloring pass considers safe to remove
the store. This patch marked all the non-vector byte and half word loads as
unsafe.
llvm-svn: 286843
The NamedRegionTimer initializer without a group name puts the Timer
into the "Misc" group and is (nearly) unused. Remove it.
The only user of this constructor appears to be the HexagonGenInsert pass,
which creates a counter without group to count the complete execution
time of that pass, however since every pass gets a counter by the
PassManager anyway this should be unnecessary. Also removed the
pointless TimerGroup there.
Differential Revision: https://reviews.llvm.org/D25582
llvm-svn: 286524
For pairs of 32-bit registers: isub_lo, isub_hi.
For pairs of vector registers: vsub_lo, vsub_hi.
Add generic subreg indices: ps_sub_lo, ps_sub_hi, and a function
HexagonRegisterInfo::getHexagonSubRegIndex(RegClass, GenericSubreg)
that returns the appropriate subreg index for RegClass.
llvm-svn: 286377
Cmake has not recognized that Hexagon.td has a new dependency in
HexagonPatterns.td. All changes to that file were not visible to
the build bots.
llvm-svn: 286084
The clr/set/toggle-bit instructions (with the bit index given as an
immediate operand) had both, custom selection code that generated them,
and selection patterns at the same time. The selection patterns were
not used, because the custom selection code was executed first.
This patch removes the custom code in favor of the selection patterns.
The custom code handled 64-bit registers as well with an immediate bit
index, and so new patterns were added to implement that.
It was also the same case for the instruction "Rd += asr(Rs, Rt)",
except that the custom code did not offer any additional functionality,
and was simply removed.
llvm-svn: 286080
Quite sad we still aren't really using aggressive dead code warnings
from Clang that we could potentially use to catch this and so many other
things.
llvm-svn: 285936
While bootstrapping Clang with recent `gcc 6.2.0` I found a bug related to misleading indentation.
I believe, a pair of `{}` was forgotten, especially given the above similar piece of code:
```
if (!RDef || !HII->isPredicable(*RDef)) {
Done = coalesceRegisters(RD, RegisterRef(S1));
if (Done) {
UpdRegs.insert(RD.Reg);
UpdRegs.insert(S1.getReg());
}
}
```
Reviewers: kparzysz
Differential Revision: https://reviews.llvm.org/D26204
llvm-svn: 285794
For example, rename s6Ext to s6_0Ext. The names for shifted integers
include the underscore and this will make the naming consistent. It
also exposed a few duplicates that were removed.
llvm-svn: 285728
Do not use LiveIntervals to recalculate kills, because that cannot be
done accurately without implicit uses on predicated instructions.
llvm-svn: 285409
This is a function to go backwards in a block to find the first
instruction in a bundle, so iterator is a more natural choice for
parameter/return rather than a reference to a MachineInstruction.
llvm-svn: 285051
(Const)?MIOperands is equivalent to the C++ style
MachineInstr::mop_iterator. Use the latter for consistency except for a
few callers of MIOperands::analyzePhysReg().
llvm-svn: 285029
These functions are about classifying a global which will actually be
emitted, so it does not make sense for them to take a GlobalValue which may
for example be an alias.
Change the Mach-O object writer and the Hexagon, Lanai and MIPS backends to
look through aliases before using TargetLoweringObjectFile interfaces. These
are functional changes but all appear to be bug fixes.
Differential Revision: https://reviews.llvm.org/D25917
llvm-svn: 285006
After register allocation it is possible to have a spill of a register
that is only partially defined. That in itself it fine, but creates a
problem for double vector registers. Stores of such registers are pseudo
instructions that are expanded into pairs of individual vector stores,
and in case of a partially defined source, one of the stores may use
an entirely undefined register. To avoid this, track the defined parts
and only generate actual stores for those.
llvm-svn: 284841
All of these existed because MSVC 2013 was unable to synthesize default
move ctors. We recently dropped support for it so all that error-prone
boilerplate can go.
No functionality change intended.
llvm-svn: 284721
This required reengineering of some of the part of liveness calculation,
including fixing some issues caused by the limitations of the previous
approach. The current code is not necessarily the fastest, but it should
be functionally correct (at least more so than before). The compile-time
performance will be addressed in the future.
llvm-svn: 284609
Use PackedRegisterRef to store the register information in the graph nodes.
This commit also removes support for virtual registers. It has never been
tested or used. It will be possible to add it back if there is a need.
llvm-svn: 284255
Each shadow only represents data flow that is restricted to its reaching
def. Propagating more than that could lead to spurious register liveness,
resulting in extra (incorrectly) block live-ins.
llvm-svn: 283143
A landing pad can have live-in registers that are defined by the runtime,
not the program (exception pointer register and exception selector
register). Make sure to recognize that case and not link these registers
with any defs in the program.
Each landing pad will have phi nodes added at the beginning to provide
definitions of these registers, but the uses of those phi nodes will not
have any reaching defs.
llvm-svn: 282519
USR_OVF is a subregister of USR, which is a member of CtrRegs. Having both
a register and its proper subregister in the same register class has bad
consequences for lane mask calculation: based solely on the lane mask info,
USR_OVF would not appear to be a subregister of USR.
llvm-svn: 282192
Recommitting after fixing AsmParser initialization and X86 inline asm
error cleanup.
Allow errors to be deferred and emitted as part of clean up to simplify
and shorten Assembly parser code. This will allow error messages to be
emitted in helper functions and be modified by the caller which has
better context.
As part of this many minor cleanups to the Parser:
* Unify parser cleanup on error
* Add Workaround for incorrect return values in ParseDirective instances
* Tighten checks on error-signifying return values for parser functions
and fix in-tree TargetParsers to be more consistent with the changes.
* Fix AArch64 test cases checking for spurious error messages that are
now fixed.
These changes should be backwards compatible with current Target Parsers
so long as the error status are correctly returned in appropriate
functions.
Reviewers: rnk, majnemer
Subscribers: aemerson, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D24047
llvm-svn: 281762
Mandeep Singh Grang