This patch makes tryCandidate() virtual and some utility functions like
tryLess(), tryGreater(), ... externally available (used to be static).
This makes it possible for a target to derive a new MachineSchedStrategy from
GenericScheduler and reuse most parts.
It was necessary to wrap functions with the same names in
AMDGPU/SIMachineScheduler in a local namespace.
Review: Andy Trick, Florian Hahn
https://reviews.llvm.org/D43329
llvm-svn: 329884
Also add double-prevoius-failure.ll which captures a test case that at one
point triggered a compiler crash, while developing calling convention support
for f64 on RV32D with soft-float ABI.
llvm-svn: 329877
fadd.d is required in order to force floating point registers to be used in
test code, as parameters are passed in integer registers in the soft float
ABI.
Much of this patch is concerned with support for passing f64 on RV32D with a
soft-float ABI. Similar to Mips, introduce pseudoinstructions to build an f64
out of a pair of i32 and to split an f64 to a pair of i32. BUILD_PAIR and
EXTRACT_ELEMENT can't be used, as a BITCAST to i64 would be necessary, but i64
is not a legal type.
llvm-svn: 329871
Without these functions it's hard to create a TargetMachine for
Orc JIT that creates efficient native code.
It's not sufficient to just expose LLVMGetHostCPUName(), because
for some CPUs there's fewer features actually available than
the CPU name indicates (e.g. AVX might be missing on some CPUs
identified as Skylake).
Differential Revision: https://reviews.llvm.org/D44861
llvm-svn: 329856
This patch fixes https://bugs.llvm.org/show_bug.cgi?id=37039
The condition only covers one of the two 64-bit rotate instructions. This just
adds the second (RLDICLo).
Patch by Josh Stone.
llvm-svn: 329852
Similar to the wbinvd instruction, except this
one does not invalidate caches. Ring 0 only.
The encoding matches a wbinvd instruction with
an F3 prefix.
Reviewers: craig.topper, zvi, ashlykov
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D43816
llvm-svn: 329847
Atom is the only x86 target that still uses schedule itineraries, if we can remove this then we can begin the work on removing x86 itineraries. I've also found that it will help with PR36550.
I've focussed on matching the existing model as closely as possible (relying on the schedule tests), PR36895 indicated a lot of these were incorrect but we can just as easily fix these after this patch as before. Hopefully we can get llvm-exegesis to help here,
There are a few instructions that rely on itinerary scheduling (mainly push/pop/return) of multiple resource stages, but I don't think any of these are show stoppers.
There are also a few codegen changes that seem related to the post-ra scheduler acting a little differently, I haven't tracked these down but they don't seem critical.
NOTE: I don't have access to any Atom hardware, so this hasn't been tested in the wild.
Differential Revision: https://reviews.llvm.org/D45486
llvm-svn: 329837
Pre-commit for D45486, don't rely on itinerary scheduler model to determine latencies for padding, use the generic TargetSchedModel::computeInstrLatency call.
Also, replace hard coded (atom specific) 2*uop creation per padding cycle with a version based on the scheduler model's issue width.
Differential Revision: https://reviews.llvm.org/D45486
llvm-svn: 329834
When NVPTX TARGET_BUILTIN specifies sm_XX or ptxYY as required feature,
consider those features available if we're compiling for GPU >= sm_XX or have
enabled PTX version >= ptxYY.
Differential Revision: https://reviews.llvm.org/D45061
llvm-svn: 329829
Summary:
This fixes the number of SGPRs and VGPRs in the *_RSRC1 register to
allow for registers set up in wave dispatch, even if those registers are
not used in the shader.
Re-landed after noticing that the buildbot failure from 329808 seemed to
be unrelated.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45503
Change-Id: I6575f0e0d2a528d1319d0b289f0ebe4510fa5771
llvm-svn: 329826
Add the minimal support necessary to lower a function that returns the
sum of two i32 values.
Support argument/return lowering of i32 values through registers only.
Add tablegen for regbankselect and instructionselect.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D44304
llvm-svn: 329819
Two issues were fixed:
runtime has difficulty to allocate memory for an external symbol of a
kernel and set the address of the external symbol, therefore make the runtime
handle of an enqueued kernel an ordinary global variable. Runtime only needs
to store the address of the loaded kernel to the handle and has verified
that this approach works.
handle the situation where __enqueue_kernel* gets inlined therefore
the enqueued kernel may be used through a constant expr instead
of an instruction.
Differential Revision: https://reviews.llvm.org/D45187
llvm-svn: 329815
This reverts 329808. That change caused a report of a failure in
test/CodeGen/MIR/AMDGPU/mir-canon-multi.mir that I didn't see. I suspect
it is an expensive-check-only error.
Change-Id: I8133f26f15e7d5ec2b09c687c12cd70e918461b0
llvm-svn: 329811
Summary:
Place parsing of a vector index into a separate function to reduce
duplication, since the code is duplicated in both the parsing of a
Neon vector register operand and a Neon vector list.
This is patch [2/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: rengolin
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45428
llvm-svn: 329809
Summary:
This fixes the number of SGPRs and VGPRs in the *_RSRC1 register to
allow for registers set up in wave dispatch, even if those registers are
not used in the shader.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45503
Change-Id: I6575f0e0d2a528d1319d0b289f0ebe4510fa5771
llvm-svn: 329808
In r329691, we would choose FP even if the offset wouldn't fit, just
because the offset is smaller than the one from BP. This made many
accesses through FP need to scavenge a register, which resulted in
slower and bigger code for no good reason.
This patch now always picks the offset that fits first, even if FP is
preferred.
llvm-svn: 329797
This is a follow up of rL327695 to instruction select more variants of VSELGT
and VSELGE, for which it is necessary to custom lower SELECT.
More work is required in this area, which will be addressed soon:
- more variants need to be regression tested, but this depends on the next point.
- first LowerConstantFP need to be adjusted for fp16 values.
Differential Revision: https://reviews.llvm.org/D45205
llvm-svn: 329788
Summary:
Merged 'tryMatchVectorRegister' (specific to Neon) and
'tryParseSVERegister' into a single 'tryParseVectorRegister' function, and
created a generic 'parseVectorKind()' function that returns the #Elements
and ElementWidth of a vector suffix. This reduces the duplication of
this functionality between two the vector implementations.
This is patch [1/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: fhahn
Subscribers: tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D45427
llvm-svn: 329782
The 128/256-bit versions were no longer used by clang. It uses the legacy SSE/AVX2 version and a select. The 512-bit was changed to the same for consistency.
llvm-svn: 329774
Author: Samuel Pitoiset
ds_read_b128 and ds_write_b128 have been recently enabled
under the amdgpu-ds128 option because the performance benefit
is unclear.
Though, using 128-bit loads/stores for the local address space
appears to introduce regressions in tessellation shaders. Not
sure what is broken, but as ds_read_b128/ds_write_b128 are not
enabled by default, just introduce a global option and enable
128-bit only if requested (until it's fixed/used correctly).
v2: - fix regressions in merge-stores.ll and multiple_tails.ll
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
llvm-svn: 329764
Summary:
When inserting MOVs to avoid Falkor HWPF collisions, the non-base
register operand of load instructions (e.g. a register offset) was not
being considered live, so it could potentially have been used as a
scratch register, clobbering the actual offset value.
Reviewers: mcrosier
Subscribers: rengolin, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45502
llvm-svn: 329761
This commit fixes the bot failures that were coming up before with r329716.
The fix was to move the check for "isInSection()" inside of the if condition
and emit the error there instead of waiting to get past the unreachable statement.
This should work in debug and release builds now.
llvm-svn: 329746
There was missing nullptr check before a call to getSection() in
recordRelocation. This would result in a segfault in code like the attached
test.
This adds the missing check and a test which makes sure we get the expected
error output.
llvm-svn: 329716
Summary:
We would like the UMR debugging tool[0] to be able to provide
disassembly for currently live waves based on plain memory
dumps, and we want to leverage the LLVM disassembler for this.
This mostly works, except that UMR clearly can't provide real
symbol info, so it wants to set DisInfo == nullptr.
[0] https://cgit.freedesktop.org/amd/umr/
Reviewers: arsenm, rampitec, artem.tamazov, dp
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D45477
Change-Id: Ibb2c5af2e66f2e100b4702fd81308e1932bc4ee6
llvm-svn: 329715
In the presence of variable-sized stack objects, we always picked the
base pointer when resolving frame indices if it was available.
This makes us hit an assert where we can't reach the emergency spill
slot if it's too far away from the base pointer. Since on AArch64 we
decide to place the emergency spill slot at the top of the frame, it
makes more sense to use FP to access it.
The changes here don't affect only emergency spill slots but all the
frame indices. The goal here is to try to choose between FP, BP and SP
so that we minimize the offset and avoid scavenging, or worse, asserting
when trying to access a slot allocated by the scavenger.
Previously discussed here: https://reviews.llvm.org/D40876.
Differential Revision: https://reviews.llvm.org/D45358
llvm-svn: 329691
Summary:
For OS type AMDPAL, the scratch descriptor is loaded from offset 0 of
the GIT, whose 32 bit pointer is in s0 (s8 for gfx9 merged shaders).
This commit fixes that to use offset 0x10 instead of offset 0 for a
compute shader, per the PAL ABI spec.
V2: Ensure s0 (s8 for gfx9 merged shader) is marked live-in when loading
scratch descriptor from GIT.
Reviewers: kzhuravl, nhaehnle, timcorringham
Subscribers: kzhuravl, wdng, yaxunl, t-tye, llvm-commits, dstuttard, nhaehnle, arsenm
Differential Revision: https://reviews.llvm.org/D44468
Change-Id: I93dffa647758e37f613bb5e0dfca840d82e6d26f
llvm-svn: 329690
Much like any written register in load/store instructions, the status register
is not allowed to overlap with any others. So diagnose it like we already do
with the other cases.
llvm-svn: 329687
The BroadwellModelProcResources had an entry for HWPort5, which is a Haswell
resource, and not a Broadwell processor resource. That entry was added to the
Broadwell model because variable blends were consuming it.
This was clearly a typo (the resource name should have been BWPort5), which
unfortunately was never caught before. It was not reported as an error because
HWPort5 is a resource defined by the Haswell model. It has been found when
testing some code with llvm-mca: the list of resources in the resource pressure
view was odd.
This patch fixes the issue; now variable blend instructions consume 2 cycles on
BWPort5 instead of HWPort5. This is enough to get rid of the extra (spurious)
entry in the BroadWellModelProcResources table.
llvm-svn: 329686
Summary:
Subtargets can define the libpfm counter names that can be used to
measure cycles and uops issued on ProcResUnits.
This allows making llvm-exegesis available on more targets.
Fixes PR36984.
Reviewers: gchatelet, RKSimon, andreadb, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45360
llvm-svn: 329675
This cleans up a number of operations that only claimed te use EFLAGS
due to using DF. But no instructions which we think of us setting EFLAGS
actually modify DF (other than things like popf) and so this needlessly
creates uses of EFLAGS that aren't really there.
In fact, DF is so restrictive it is pretty easy to model. Only STD, CLD,
and the whole-flags writes (WRFLAGS and POPF) need to model this.
I've also somewhat cleaned up some of the flag management instruction
definitions to be in the correct .td file.
Adding this extra register also uncovered a failure to use the correct
datatype to hold X86 registers, and I've corrected that as necessary
here.
Differential Revision: https://reviews.llvm.org/D45154
llvm-svn: 329673
Prefer to use the 32-bit AND with immediate instead.
Primarily I'm doing this to ensure that immediates created by shrinkAndImmediate will always get absorbed into the AND. But I do believe this would be a reduction in the number of uops that need to execute. Ideally we should shrink the 'and' and the 'load' during DAG combine to re-enable the fold.
Fixes PR37063.
llvm-svn: 329667
The key idea is to lower COPY nodes populating EFLAGS by scanning the
uses of EFLAGS and introducing dedicated code to preserve the necessary
state in a GPR. In the vast majority of cases, these uses are cmovCC and
jCC instructions. For such cases, we can very easily save and restore
the necessary information by simply inserting a setCC into a GPR where
the original flags are live, and then testing that GPR directly to feed
the cmov or conditional branch.
However, things are a bit more tricky if arithmetic is using the flags.
This patch handles the vast majority of cases that seem to come up in
practice: adc, adcx, adox, rcl, and rcr; all without taking advantage of
partially preserved EFLAGS as LLVM doesn't currently model that at all.
There are a large number of operations that techinaclly observe EFLAGS
currently but shouldn't in this case -- they typically are using DF.
Currently, they will not be handled by this approach. However, I have
never seen this issue come up in practice. It is already pretty rare to
have these patterns come up in practical code with LLVM. I had to resort
to writing MIR tests to cover most of the logic in this pass already.
I suspect even with its current amount of coverage of arithmetic users
of EFLAGS it will be a significant improvement over the current use of
pushf/popf. It will also produce substantially faster code in most of
the common patterns.
This patch also removes all of the old lowering for EFLAGS copies, and
the hack that forced us to use a frame pointer when EFLAGS copies were
found anywhere in a function so that the dynamic stack adjustment wasn't
a problem. None of this is needed as we now lower all of these copies
directly in MI and without require stack adjustments.
Lots of thanks to Reid who came up with several aspects of this
approach, and Craig who helped me work out a couple of things tripping
me up while working on this.
Differential Revision: https://reviews.llvm.org/D45146
llvm-svn: 329657
Lower is slightly odd. It often doesn't change the type but the lowerings
do use the new type to decide what code to create. Treat it like a mutation
but provide convenience functions that re-use the existing type.
Re-uses the existing tests:
test/CodeGen/AArch64/GlobalISel/legalize-rem.mir
test/CodeGen/AArch64/GlobalISel//legalize-mul.mir
test/CodeGen/AArch64/GlobalISel//legalize-cmpxchg-with-success.mir
llvm-svn: 329623
1. Remove max_scratch_backing_memory_byte_size from kernel header
2. Make it a reserved field
3. Ignore it while parsing assembly for backwards compatibility
4. Bump up minor version of kernel header
Differential Revision: https://reviews.llvm.org/D45452
llvm-svn: 329620
LowerIntUnary as its name says has an assert for integer types. But for the bitcast case one side might be an FP type.
Rather than making sure the function really works for fp types and renaming it. Just do really basic splitting directly. The LowerIntUnary has the advantage that it can peek through BUILD_VECTOR because every other call is during Lowering. But these calls are during legalization and will be followed by a DAG combine round.
Revert some change to LowerVectorIntUnary that were originally made just to make these two calls work even in pure integer cases.
This was found purely by compiling the avx512f-builtins.c test from clang so I've copied over the offending function from that.
llvm-svn: 329616
This is a code size win in code that takes offseted addresses
frequently, such as C++ constructors that typically need to compute
an offseted address of a vtable. It reduces the size of Chromium for
Android's .text section by 46KB, or 56KB with ThinLTO (which exposes
more opportunities to use a direct access rather than a GOT access).
Because the addend range is limited in COFF and Mach-O, this is
enabled for ELF only.
Differential Revision: https://reviews.llvm.org/D45199
llvm-svn: 329611
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: sunfish, RKSimon
Reviewed By: sunfish
Subscribers: jfb, dschuff, sbc100, jgravelle-google, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D44873
llvm-svn: 329607
While it appears to be correct information based on Intel's optimization manual and Agner's data, it causes perf regressions on a couple of the benchmarks in our internal list.
llvm-svn: 329593
Author: Samuel Pitoiset
ds_read_b128 and ds_write_b128 have been recently enabled
under the amdgpu-ds128 option because the performance benefit
is unclear.
Though, using 128-bit loads/stores for the local address space
appears to introduce regressions in tessellation shaders. Not
sure what is broken, but as ds_read_b128/ds_write_b128 are not
enabled by default, just introduce a global option and enable
128-bit only if requested (until it's fixed/used correctly).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
llvm-svn: 329591
Summary:
This fixes AMDGPU GlobalISel test failures when enabling the AMDGPU
target without any other targets that use GlobalISel.
Reviewers: arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, rovka, kristof.beyls, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D45353
llvm-svn: 329588
The TargetSchedModel is always initialized using the TargetSubtargetInfo's
MCSchedModel and TargetInstrInfo, so we don't need to extract those and
pass 3 parameters to init().
Differential Revision: https://reviews.llvm.org/D44789
llvm-svn: 329540
Summary:
Cmov and setcc previously used WriteALU, but on Intel processors at least they are more restricted than basic ALU ops.
This patch adds new SchedWrites for them and removes the InstRWs. I had to leave some InstRWs for CMOVA/CMOVBE and SETA/SETBE because those have an extra uop relative to the other condition codes on Intel CPUs.
The test changes are due to fixing a missing ZnAGU dependency on the memory form of setcc.
Reviewers: RKSimon, andreadb, GGanesh
Reviewed By: RKSimon
Subscribers: GGanesh, llvm-commits
Differential Revision: https://reviews.llvm.org/D45380
llvm-svn: 329539
Summary:
This removes the InstRWs for BLENDVPS/PD in favor of WriteFVarBlend. The latency listed was 3 cycles but WriteFVarBlend is defined as 1 cycle latency. The 1 cycle latency matches Agner Fog's data.
The patterns were missing the VEX forms which is why there are no test changes. We don't test "-mcpu=znver1 -mattr=-avx"
Reviewers: RKSimon, GGanesh
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44841
llvm-svn: 329538
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: hfinkel, RKSimon
Reviewed By: RKSimon
Subscribers: nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D44870
llvm-svn: 329535
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: chandlerc, craig.topper, RKSimon
Reviewed By: chandlerc, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44874
llvm-svn: 329534
Previously we used a custom lowering for this because of the AVX1 splitting requirement. But we can do the split during DAG combine if we check the types and subtarget
llvm-svn: 329510
Should fix UBSan bot by also checking there's no "uwtable" attribute
before skipping. Otherwise the unwind table will be useless since its
moves expect CSRs to actually be preserved.
A noreturn nounwind function can be expected to never return in any way, and by
never returning it will also never have to restore any callee-saved registers
for its caller. This makes it possible to skip spills of those registers during
function entry, saving some stack space and time in the process. This is rather
useful for embedded targets with limited stack space.
Should fix PR9970.
Patch mostly by myeisha (pmb).
llvm-svn: 329494
Previously HalfTy was not handled which would either trigger an assertion,
or result in array initialized with garbage.
Differential Revision: https://reviews.llvm.org/D45391
llvm-svn: 329463
v2f16 is a special case in NVPTX. v4f16 may be loaded as a pair of v2f16
and that was not previously handled correctly by tryLDGLDU()
Differential Revision: https://reviews.llvm.org/D45339
llvm-svn: 329456
Summary:
This patch implements a tablegen-driven Instruction Compression
mechanism for generating RISCV compressed instructions
(C Extension) from the expanded instruction form.
This tablegen backend processes CompressPat declarations in a
td file and generates all the compile-time and runtime checks
required to validate the declarations, validate the input
operands and generate correct instructions.
The checks include validating register operands, immediate
operands, fixed register operands and fixed immediate operands.
Example:
class CompressPat<dag input, dag output> {
dag Input = input;
dag Output = output;
list<Predicate> Predicates = [];
}
let Predicates = [HasStdExtC] in {
def : CompressPat<(ADD GPRNoX0:$rs1, GPRNoX0:$rs1, GPRNoX0:$rs2),
(C_ADD GPRNoX0:$rs1, GPRNoX0:$rs2)>;
}
The result is an auto-generated header file
'RISCVGenCompressEmitter.inc' which exports two functions for
compressing/uncompressing MCInst instructions, plus
some helper functions:
bool compressInst(MCInst& OutInst, const MCInst &MI,
const MCSubtargetInfo &STI,
MCContext &Context);
bool uncompressInst(MCInst& OutInst, const MCInst &MI,
const MCRegisterInfo &MRI,
const MCSubtargetInfo &STI);
The clients that include this auto-generated header file and
invoke these functions can compress an instruction before emitting
it, in the target-specific ASM or ELF streamer, or can uncompress
an instruction before printing it, when the expanded instruction
format aliases is favored.
The following clients were added to implement compression\uncompression
for RISCV:
1) RISCVAsmParser::MatchAndEmitInstruction:
Inserted a call to compressInst() to compresses instructions
parsed by llvm-mc coming from an ASM input.
2) RISCVAsmPrinter::EmitInstruction:
Inserted a call to compressInst() to compress instructions that
were lowered from Machine Instructions (MachineInstr).
3) RVInstPrinter::printInst:
Inserted a call to uncompressInst() to print the expanded
version of the instruction instead of the compressed one (e.g,
add s0, s0, a5 instead of c.add s0, a5) when -riscv-no-aliases
is not passed.
This patch squashes D45119, D42780 and D41932. It was reviewed in smaller patches by
asb, efriedma, apazos and mgrang.
Reviewers: asb, efriedma, apazos, llvm-commits, sabuasal
Reviewed By: sabuasal
Subscribers: mgorny, eraman, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, niosHD, kito-cheng, shiva0217, zzheng
Differential Revision: https://reviews.llvm.org/D45385
llvm-svn: 329455
The compiler is generating packet with the following instructions,
which causes an undefined register assert in the verifier.
$r0 = IMPLICIT_DEF
$r1 = IMPLICIT_DEF
S2_storerd_io killed $r29, 0, killed %d0
The problem is that the packetizer is not saving the IMPLICIT_DEF
instructions, which are needed when checking if it is legal to
add the store instruction. The fix is to add the IMPLICIT_DEF
instructions to the CurrentPacketMIs structure.
Patch by Brendon Cahoon.
llvm-svn: 329439
Packetizer keeps two zero-latency bound instrctions in the same packet ignoring
the stalls on the later instruction. This should not be the case if there is no
data dependence.
Patch by Sumanth Gundapaneni.
llvm-svn: 329437
Summary:
This patch removes InstRW overrides for basic arithmetic/logic instructions. To do this I've added the store address port to RMW. And used a WriteSequence to make the latency additive. It does not cover ADC/SBB because they have different latency.
Apparently we were inconsistent about whether the store has latency or not thus the test changes.
I've also left out Sandy Bridge because the load latency there is currently 4 cycles and should be 5.
Reviewers: RKSimon, andreadb
Reviewed By: andreadb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45351
llvm-svn: 329416
As mentioned on D44647, this patch increases the default memory latency to +5cy , which more closely matches what most custom cases are doing for reg-mem instructions.
I've bumped LoadLatency, ReadAfterLd and WriteLoad values to 5cy to be consistent.
As Sandy Bridge is currently our default generic model, this affects a lot of scheduling tests...
Differential Revision: https://reviews.llvm.org/D44654
llvm-svn: 329388
VSX D-form load/store instructions of POWER9 require the offset be a multiple of 16 and a helper`isOffsetMultipleOf` is used to check this.
So far, the helper handles FrameIndex + offset case, but not handling FrameIndex without offset case. Due to this, we are missing opportunities to exploit D-form instructions when accessing an object or array allocated on stack.
For example, x-form store (stxvx) is used for int a[4] = {0}; instead of d-form store (stxv). For larger arrays, D-form instruction is not used when accessing the first 16-byte. Using D-form instructions reduces register pressure as well as instructions.
Differential Revision: https://reviews.llvm.org/D45079
llvm-svn: 329377
Summary:
Replace ArrayRefs by actual std::array objects so that there are
no dangling references.
Reviewers: rsmith, gkistanova
Subscribers: sdardis, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45338
llvm-svn: 329359
This is the 32-bit mode version of LEAVE64. It should be at least somewhat similar to LEAVE64.
The Sandy Bridge version was missing a load port use.
llvm-svn: 329347
Currently it is 6. If the "feature" was not used, report dummy
hidden argument. Otherwise it does not match the kernarg size
reported in the kernel header.
Differential Revision: https://reviews.llvm.org/D45129
llvm-svn: 329341
We were forcing the latency of these instructions to 5 cycles, but every other scheduler model had them as 1 cycle. I'm sure I didn't get everything, but this gets a big portion.
llvm-svn: 329339
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: t.p.northover, RKSimon, MatzeB, bkramer
Reviewed By: bkramer
Subscribers: javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44855
llvm-svn: 329329
This patch adds a way for users to create their own custom sections to
be added to wasm files. At the LLVM IR layer, they are defined through
the "wasm.custom_sections" named metadata. The expected use case for
this is bindings generators such as wasm-bindgen.
Patch by Dan Gohman
Differential Revision: https://reviews.llvm.org/D45297
llvm-svn: 329315
This patch adds the ability to describe properties of the hardware retire
control unit.
Tablegen class RetireControlUnit has been added for this purpose (see
TargetSchedule.td).
A RetireControlUnit specifies the size of the reorder buffer, as well as the
maximum number of opcodes that can be retired every cycle.
A zero (or negative) value for the reorder buffer size means: "the size is
unknown". If the size is unknown, then llvm-mca defaults it to the value of
field SchedMachineModel::MicroOpBufferSize. A zero or negative number of
opcodes retired per cycle means: "there is no restriction on the number of
instructions that can be retired every cycle".
Models can optionally specify an instance of RetireControlUnit. There can only
be up-to one RetireControlUnit definition per scheduling model.
Information related to the RCU (RetireControlUnit) is stored in (two new fields
of) MCExtraProcessorInfo. llvm-mca loads that information when it initializes
the DispatchUnit / RetireControlUnit (see Dispatch.h/Dispatch.cpp).
This patch fixes PR36661.
Differential Revision: https://reviews.llvm.org/D45259
llvm-svn: 329304
A noreturn nounwind function can be expected to never return in any way, and by
never returning it will also never have to restore any callee-saved registers
for its caller. This makes it possible to skip spills of those registers during
function entry, saving some stack space and time in the process. This is rather
useful for embedded targets with limited stack space.
Should fix PR9970.
Patch by myeisha (pmb).
llvm-svn: 329287
For schedule models that don't use itineraries, checkCompleteness still checks that an instruction has a matching itinerary instead of skipping and going straight to matching the InstRWs. That doesn't seem to match what happens in TargetSchedule.cpp
This patch causes problems for a number of models that had been incorrectly flagged as complete.
Differential Revision: https://reviews.llvm.org/D43235
llvm-svn: 329280
It's failing on the bots and I'm not sure why.
This reverts:
[X86] Synchronize the SchedRW on some EVEX instructions with their VEX equivalents.
[X86] Use WriteFShuffle256 for VEXTRACTF128 to be consistent with VEXTRACTI128 which uses WriteShuffle256.
[X86] Remove some InstRWs for plain store instructions on Sandy Bridge.
[X86] Auto-generate complete checks. NFC
llvm-svn: 329256
A bug was found where an offset of -1 would generate an encoding
of max int64 which is invalid in the binary format.
Differential Revision: https://reviews.llvm.org/D45280
llvm-svn: 329238
The implementation of shadow call stack on aarch64 is quite different to
the implementation on x86_64. Instead of reserving a segment register for
the shadow call stack, we reserve the platform register, x18. Any function
that spills lr to sp also spills it to the shadow call stack, a pointer to
which is stored in x18.
Differential Revision: https://reviews.llvm.org/D45239
llvm-svn: 329236
The MachineOutliner has a bunch of target hooks that will call llvm_unreachable
if the target doesn't implement them. Therefore, if you enable the outliner on
such a target, it'll just crash. It'd be much better if it'd just *not* run
the outliner at all in this case.
This commit adds a hook to TargetInstrInfo that returns false by default.
Targets that implement the hook make it return true. The outliner checks the
return value of this hook to decide whether or not to continue.
llvm-svn: 329220
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort. Refer the comments section in D44363 for a list of all the required patches.
Reviewers: t.p.northover, jmolloy, RKSimon, rengolin
Reviewed By: rengolin
Subscribers: dexonsmith, rengolin, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D44853
llvm-svn: 329216
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
They were added in r285274, in what looks like a merge mishap.
AVRGenMCCodeEmitter.inc is the only non-dupe tablegen invocation added in that
revision.
Also sort the tablegen lines to make this easier to spot in the future.
llvm-svn: 329178
Summary:
These new image intrinsics contain the texture type as part of
their name and have each component of the address/coordinate as
individual parameters.
This is a preparatory step for implementing the A16 feature, where
coordinates are passed as half-floats or -ints, but the Z compare
value and texel offsets are still full dwords, making it difficult
or impossible to distinguish between A16 on or off in the old-style
intrinsics.
Additionally, these intrinsics pass the 'texfailpolicy' and
'cachectrl' as i32 bit fields to reduce operand clutter and allow
for future extensibility.
v2:
- gather4 supports 2darray images
- fix a bug with 1D images on SI
Change-Id: I099f309e0a394082a5901ea196c3967afb867f04
Reviewers: arsenm, rampitec, b-sumner
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D44939
llvm-svn: 329166
Summary:
When an i1-value is defined inside of a loop and used outside of it, we
cannot simply use the SGPR bitmask from the loop's last iteration.
There are also useful and correct cases of an i1-value being copied between
basic blocks, e.g. when a condition is computed outside of a loop and used
inside it. The concept of dominators is not sufficient to capture what is
going on, so I propose the notion of "lane-dominators".
Fixes a bug encountered in Nier: Automata.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103743
Change-Id: If37b969ddc71d823ab3004aeafb9ea050e45bd9a
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D40547
llvm-svn: 329164
Summary:
Patch https://reviews.llvm.org/D44467 implements conversion of invalid
vmov instructions into valid ones. It turned out that some valid
instructions also get converted, for example
vmov.i64 d2, #0xff00ff00ff00ff00 ->
vmov.i16 d2, #0xff00
Such behavior is incorrect because according to the ARM ARM section
F2.7.7 Modified immediate constants in T32 and A32 Advanced SIMD
instructions, "On assembly, the data type must be matched in the table
if possible."
This patch fixes the isNEONmovReplicate check so that the above
instruction is not modified any more.
Reviewers: rengolin, olista01
Reviewed By: rengolin
Subscribers: javed.absar, kristof.beyls, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D44678
llvm-svn: 329158
These both use a 16-bit load, but one used loadi16_anyext and the other used extloadi32i16. The only difference between them is that loadi16_anyext checked that the load was at least 2 byte aligned and non-volatile. But the alignment doesn't matter here. Just use extloadi32i16 for both.
llvm-svn: 329154
Summary:
The ShadowCallStack pass instruments functions marked with the
shadowcallstack attribute. The instrumented prolog saves the return
address to [gs:offset] where offset is stored and updated in [gs:0].
The instrumented epilog loads/updates the return address from [gs:0]
and checks that it matches the return address on the stack before
returning.
Reviewers: pcc, vitalybuka
Reviewed By: pcc
Subscribers: cryptoad, eugenis, craig.topper, mgorny, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44802
llvm-svn: 329139
This commit is similar to r329120, but uses the existing getUsesRedZone() function
in X86MachineFunctionInfo. This teaches the outliner to look at whether or not a
function *truly* uses a redzone instead of just the noredzone attribute on a
function.
Thus, after this commit, it's possible to outline from x86 without using
-mno-red-zone and still get outlining results.
This also adds a new test for the new redzone behaviour.
llvm-svn: 329134
Summary: There are no packed instructions for min3 or max3. So, performMinMaxCombine should not optimize vectors of f16 to min3/max3.
Author: FarhanaAleen
Reviewed By: arsenm
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D45219
llvm-svn: 329131
This patch adds a hasRedZone() function to AArch64MachineFunctionInfo. It
returns true if the function is known to use a redzone, false if it is known
to not use a redzone, and no value otherwise.
This removes the requirement to pass -mno-red-zone when outlining for AArch64.
https://reviews.llvm.org/D45189
llvm-svn: 329120
Summary:
This change declare that PostRAMachineSinking and ShrinkWrap require NoVRegs
property, so now the MachineFunctionPass can enforce this check.
These passes are disabled in NVPTX & WebAssembly.
Reviewers: dschuff, jlebar, tra, jgravelle-google, MatzeB, sebpop, thegameg, mcrosier
Reviewed By: dschuff, thegameg
Subscribers: jholewinski, jfb, sbc100, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D45183
llvm-svn: 329095
This patch allows the description of register files in processor scheduling
models. This addresses PR36662.
A new tablegen class named 'RegisterFile' has been added to TargetSchedule.td.
Targets can optionally describe register files for their processors using that
class. In particular, class RegisterFile allows to specify:
- The total number of physical registers.
- Which target registers are accessible through the register file.
- The cost of allocating a register at register renaming stage.
Example (from this patch - see file X86/X86ScheduleBtVer2.td)
def FpuPRF : RegisterFile<72, [VR64, VR128, VR256], [1, 1, 2]>
Here, FpuPRF describes a register file for MMX/XMM/YMM registers. On Jaguar
(btver2), a YMM register definition consumes 2 physical registers, while MMX/XMM
register definitions only cost 1 physical register.
The syntax allows to specify an empty set of register classes. An empty set of
register classes means: this register file models all the registers specified by
the Target. For each register class, users can specify an optional register
cost. By default, register costs default to 1. A value of 0 for the number of
physical registers means: "this register file has an unbounded number of
physical registers".
This patch is structured in two parts.
* Part 1 - MC/Tablegen *
A first part adds the tablegen definition of RegisterFile, and teaches the
SubtargetEmitter how to emit information related to register files.
Information about register files is accessible through an instance of
MCExtraProcessorInfo.
The idea behind this design is to logically partition the processor description
which is only used by external tools (like llvm-mca) from the processor
information used by the llvm machine schedulers.
I think that this design would make easier for targets to get rid of the extra
processor information if they don't want it.
* Part 2 - llvm-mca related *
The second part of this patch is related to changes to llvm-mca.
The main differences are:
1) class RegisterFile now needs to take into account the "cost of a register"
when allocating physical registers at register renaming stage.
2) Point 1. triggered a minor refactoring which lef to the removal of the
"maximum 32 register files" restriction.
3) The BackendStatistics view has been updated so that we can print out extra
details related to each register file implemented by the processor.
The effect of point 3. is also visible in tests register-files-[1..5].s.
Differential Revision: https://reviews.llvm.org/D44980
llvm-svn: 329067
Commit 37962a331c77 ("bpf: Improve expanding logic in LowerSELECT_CC")
intended to improve code quality for certain jmp conditions. The
commit, however, has a couple of issues:
(1). In code, just swap is not enough, ConditionalCode CC
should also be swapped, otherwise incorrect code will
be generated.
(2). The ConditionalCode swap should be subject to
getHasJmpExt(). If getHasJmpExt() is False, certain
conditional codes will not be supported and swap
may generate incorrect code.
The original goal for this patch is to optimize jmp operations
which does not have JmpExt turned on. If JmpExt is on,
better code could be generated. For example, the test
select_ri.ll is introduced to demonstrate the optimization.
The same result can be achieved with -mcpu=v2 flag.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 329043
For Hexagon, peeling loops with small runtime trip count is beneficial for our
benchmarks. We set PeelCount in HexagonTargetInfo.cpp and we use PeelCount set
by the target for computing the desired peel count.
Differential Revision: https://reviews.llvm.org/D44880
llvm-svn: 329042
If a load follows a store and reloads data that the store has written to memory, Intel microarchitectures can in many cases forward the data directly from the store to the load, This "store forwarding" saves cycles by enabling the load to directly obtain the data instead of accessing the data from cache or memory.
A "store forward block" occurs in cases that a store cannot be forwarded to the load. The most typical case of store forward block on Intel Core microarchiticutre that a small store cannot be forwarded to a large load.
The estimated penalty for a store forward block is ~13 cycles.
This pass tries to recognize and handle cases where "store forward block" is created by the compiler when lowering memcpy calls to a sequence
of a load and a store.
The pass currently only handles cases where memcpy is lowered to XMM/YMM registers, it tries to break the memcpy into smaller copies.
breaking the memcpy should be possible since there is no atomicity guarantee for loads and stores to XMM/YMM.
Differential revision: https://reviews.llvm.org/D41330
Change-Id: Ib48836ccdf6005989f7d4466fa2035b7b04415d9
llvm-svn: 328973
Give them both the same itineraries. Add hasSideEffects = 0 to ADOX since they don't have patterns. Rename source operands to $src1 and $src2 instead of $src0 and $src. Add ReadAfterLd to the memory form SchedRW.
llvm-svn: 328952
This also moves to define it in the same way as ADCX which seems to use
constraints a bit better.
This is pulled out of the review for reducing the use of popf for
restoring EFLAGS, but is independent. There are still more problems with
our definitions for these instructions that Craig is going to look at
but this is at least less broken and he can start from this to improve
them more fully.
Thanks to Craig for the review here.
llvm-svn: 328945
for X86's instruction information. I've now got a second patch under
review that needs these same APIs. This bit is nicely orthogonal and
obvious, so landing it. NFC.
llvm-svn: 328944
Summary:
This is in preparation for the new dimension-aware image intrinsics,
which I'd rather not have to list here by hand.
Change-Id: Iaa16e3a635a11283918ce0d9e1e618591b0bf6fa
Reviewers: arsenm, rampitec, b-sumner
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D44938
llvm-svn: 328939
Summary:
Avoids having to list all intrinsics manually.
This is in preparation for the new dimension-aware image intrinsics,
which I'd rather not have to list here by hand.
Change-Id: If7ced04998397ef68c4cb8f7de66b5050fb767e5
Reviewers: arsenm, rampitec, b-sumner
Subscribers: kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D44937
llvm-svn: 328938
This Promote flag was alwasys set to true except in the default case. But in the default case we don't need to set PVT and can just return false.
llvm-svn: 328926
Summary:
It seems many CPUs don't implement this instruction as well as the other vector multiplies. Often using a multi uop flow. Silvermont in particular has a 7 uop flow with 11 cycle throughput. Sandy Bridge implements it as a single uop with 5 cycle latency and 1 cycle throughput. But Haswell and later use 2 uops with 10 cycle latency and 2 cycle throughput.
This patch adds a new X86SchedWritePair we can use to tag this instruction separately. I've provided correct information for Silvermont, Btver2, and Sandy Bridge. I've removed the InstRWs for SandyBridge. I've left Haswell/Broadwell/Skylake InstRWs in place because I wasn't sure how to account for the different load latency between 128 and 256 bits. I also left Znver1 InstRWs in place because the existing values don't match Agner's spreadsheet.
I also left a FIXME in the SandyBridge model because it being used for the "generic" model is too optimistic for the 256/512-bit versions since those are multiple uops on all known CPUs.
Reviewers: RKSimon, GGanesh, courbet
Reviewed By: RKSimon
Subscribers: gchatelet, gbedwell, andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D44972
llvm-svn: 328914
Summary:
This exposes WebAssembly passes for use on the command line (as
arguments to -print-before and the like).
Reviewers: dschuff, sunfish
Subscribers: MatzeB, jfb, sbc100, llvm-commits, aheejin
Differential Revision: https://reviews.llvm.org/D45103
llvm-svn: 328901
Two memory instructions with a dependency only on the address register
between the two (the first one of them being post-incrememnt) can be
packetized together after the offset on the second was updated to the
incremement value. Make sure that the new offset is valid for the
instruction.
llvm-svn: 328897
Summary:
Make NVPTX require structured CFG. Added a temporary flag to
"roll back" the behavior for easy deployment.
Combined with D45008, this fixes several internal Nvidia GPU test
failures that we suspect to be ptxas miscompiles (PR27738).
Reviewers: jlebar
Subscribers: jholewinski, sanjoy, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D45070
llvm-svn: 328885
Summary:
The phase attempts to transform operations that extract a portion of a value
into an SDWA src operand in cases where that value is used only once. It
was not prepared for this use to be the preserved portion of a value for
dst:UNUSED_PRESERVE, resulting in a crash or assert.
This change either rejects the illegal SDWA attempt, or in the case where
dst:WORD_1 and the src_sel would be WORD_0, removes the unneeded
extract instruction.
Reviewers: arsenm, #amdgpu
Reviewed By: arsenm, #amdgpu
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D44364
llvm-svn: 328856
For Hexagon, peeling loops with small runtime trip count is beneficial for our
benchmarks. We set PeelCount in HexagonTargetInfo.cpp and we use PeelCount set
by the target for computing the desired peel count.
Differential Revision: https://reviews.llvm.org/D44880
llvm-svn: 328854
Sometimes the operand comes after the memory operand so we need 5 ReadDefaults first.
I suspect we also need to do something for the mask operand for masked avx512 instructions? I'm not sure if the mask should be ReadAfterLd or not since it can mask faults. If it shouldn't be ReadAfterLd then we're probably wrong for zero masking instructions already.
Differential Revision: https://reviews.llvm.org/D44726
llvm-svn: 328834
While the stack access instructions don't care about
alignment > 4, some transformations on the pointer calculation
do make assumptions based on knowing the low bits of a pointer
are 0. If a stack object ends up being accessed through its
absolute address (relative to the kernel scratch wave offset),
the addressing expression may depend on the stack frame being
properly aligned. This was breaking in a testcase due to the
add->or combine.
I think some of the SP/FP handling logic is still backwards,
and overly simplistic to support all of the stack features.
Code which tries to modify the SP with inline asm for example
or variable sized objects will probably require redoing this.
llvm-svn: 328831
The memory form of these instructions only read an input from memory. They don't have any register operands.
Differential Revision: https://reviews.llvm.org/D44836
llvm-svn: 328828
These instructions have the memory operand before the register operand. So we need to put ReadDefault for all the load ops first. Then the ReadAfterLd
Differential Revision: https://reviews.llvm.org/D44838
llvm-svn: 328823
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: sdardis, RKSimon, dsanders, atanasyan
Reviewed By: atanasyan
Subscribers: atanasyan, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D44869
llvm-svn: 328815
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
We are re-adding all the bitcasts, constant masks and target shuffles to the work list for no apparent gain.
Found while investigating adding SimplifyDemandedVectorElts to target shuffles.
Differential Revision: https://reviews.llvm.org/D44942
llvm-svn: 328771
I believe the role of ehDataReg has been replaced by MipsABIInfo::GetEhDataReg, thus removing the dead code.
Patch By: Wei-Ren Chen.
Reviewers: ehostunreach, sdardis
Differential Revision: https://reviews.llvm.org/D44867
llvm-svn: 328767
The IntelPrinter and the ATTPrinter produce the same strings for the same input. We already use the ATTPrinter explicitly in several other places.
llvm-svn: 328762
Most of these were optional matches at the end of the strings, but since the strings themselves are prefix matches by default you don't need to check for something optional at the end.
I've left the 'b' on memory instructions where it means 'broadcast' because I'm not sure those really have the same load latency and we may need to split them explicitly in the future.
llvm-svn: 328730
These instructions have been around for a long time, but we
haven't supported intrinsics for them. The "new" versions use
the CSx register for the start of the buffer instead of the K
field in the Mx register.
We need to use pseudo instructions for these instructions until
after register allocation. The problem is that these instructions
allocate a M0/CS0 or M1/CS1 pair. But, we can't generate code for
the CSx set-up until after register allocation when the Mx
register has been fixed for the instruction.
There is a related clang patch.
Patch by Brendon Cahoon.
llvm-svn: 328724
This commit simplifies the call outlining logic by removing references to the
Function associated with the callee. To do this, it requires that valid
callee save info is available to the outliner.
llvm-svn: 328719
Similar to r328694. The number of micro opcodes should be 2 for those
instructions.
This was found when testing AVX code for BtVer2 using llvm-mca.
llvm-svn: 328698
This reverts commit 0daf86291d3aa04d3cc280cd0ef24abdb0174981.
It was causing an assert in test/CodeGen/AMDGPU/amdpal.ll only on a
release-with-asserts build. I will resubmit the change when I have fixed
that.
Change-Id: If270594eba27a7dc4076bdeab3fa8e6bfda3288a
llvm-svn: 328695
The Jaguar backend natively supports 128-bit data types. Operations on YMM
registers are split into two COPs (complex operations). Each COP consumes a slot
in the dispatch group, and in the reorder buffer.
The scheduling model for Jaguar should mark those instructions as `let
NumMicroOps = 2`.
This was found when testing AVX code for BtVer2 using llvm-mca.
llvm-svn: 328694
Follow up patch of r328313 to support the UseVMOVSR constraint. Removed
some unneeded instructions from the test and removed some stray
comments.
Differential Revision: https://reviews.llvm.org/D44941
llvm-svn: 328691
If an ADRP appears with, say, a CPI operand, we shouldn't outline it.
This moves the check for unsafe operands so that it occurs before the special-case
for ADRPs. Also add a test for outlining ADRPs.
llvm-svn: 328674
Summary:
For OS type AMDPAL, the scratch descriptor is loaded from offset 0 of
the GIT, whose 32 bit pointer is in s0 (s8 for gfx9 merged shaders).
This commit fixes that to use offset 0x10 instead of offset 0 for a
compute shader, per the PAL ABI spec.
Reviewers: kzhuravl, nhaehnle, timcorringham
Subscribers: kzhuravl, wdng, yaxunl, t-tye, llvm-commits, dstuttard, nhaehnle, arsenm
Differential Revision: https://reviews.llvm.org/D44468
Change-Id: I93dffa647758e37f613bb5e0dfca840d82e6d26f
llvm-svn: 328673
Currently MOVMSK instructions use the WriteVecLogic class, which is a very poor choice given that MOVMSK involves a SSE->GPR transfer.
Differential Revision: https://reviews.llvm.org/D44924
llvm-svn: 328664
Before this was not done if the function had no calls in it. This
is still a possible issue with any callable function, regardless
of calls present.
llvm-svn: 328659
The combine on a select of a load only triggers for
addrspace 0, and discards the MachinePointerInfo. The
conservative default needs to be used for this.
llvm-svn: 328652
In a function, s5 is used as the frame base SGPR. If a function
is calling another function, during the call sequence
it is copied to a preserved SGPR and restored.
Before it was possible for the scheduler to move stack operations
before the restore of s5, since there's nothing to associate
a frame index access with the restore.
Add an implicit use of s5 to the adjcallstack pseudo which ends
the call sequence to preven this from happening. I'm not 100%
satisfied with this solution, but I'm not sure what else would be
better.
llvm-svn: 328650
Simon Pilgrim