We were previously prefering ZEXTLOAD over EXTLOAD if it is legal. This triggers during X86's promotion of i16->i32. Not sure about other targets.
Using ZEXTLOAD can prevent folding it to SEXTLOAD later if we were to promote a sign extended operand like we would need for SRA. However, X86 doesn't currently promote i16 SRA. I was looking into doing that which is how I found this issue.
This is also blocking our ability to fold 4 byte aligned EXTLOADs with "loadi32". This is what caused most of the test changes here.
Differential Revision: https://reviews.llvm.org/D45585#inline-402825
llvm-svn: 330781
Previously, _any_ store or load instruction was considered to be
operating on a spill if it had a frameindex as an operand, and thus
was fair game for optimisations such as "StackSlotColoring". This
usually works, except on architectures where spills can be partially
restored, for example on X86 where a spilt vector can have a single
component loaded (zeroing the rest of the target register). This can be
mis-interpreted and the zero extension unsoundly eliminated, see
pr30821.
To avoid this, this commit optionally provides the caller to
isLoadFromStackSlot and isStoreToStackSlot with the number of bytes
spilt/loaded by the given instruction. Optimisations can then determine
that a full spill followed by a partial load (or vice versa), for
example, cannot necessarily be commuted.
Patch by Jeremy Morse!
Differential Revision: https://reviews.llvm.org/D44782
llvm-svn: 330778
The output of update_llc_test_checks.py on this test file has changed,
so the test file should be updated to minimize source changes in future
patches.
The test updates for this file appear to be limited to relaxations of
the form:
-; SSE2-NEXT: movq %rdi, -{{[0-9]+}}(%rsp) # 8-byte Spill
+; SSE2-NEXT: movq %rdi, {{[-0-9]+}}(%r{{[sb]}}p) # 8-byte Spill
This was suggested in https://reviews.llvm.org/D45995.
llvm-svn: 330758
Split off pinsr/pextr and extractps instructions.
(Mostly) fixes PR36887.
Note: It might be worth adding a WriteFInsertLd class as well in the future.
Differential Revision: https://reviews.llvm.org/D45929
llvm-svn: 330714
Summary:
If attribute "use-soft-float"="true" is set then X86ISelLowering.cpp sets
'Promote' action for ISD::SINT_TO_FP operation on type i32.
But 'Promote' action is not proper in this case since lib function
__floatsidf is available for casting from signed int to float type.
Thus Expand action is more suitable here.
The Expand action should be set for ISD::UINT_TO_FP for soft float as well.
If function attribute "use-soft-float"="true" is set then infinite looping
can happen in DAG combining, function visitSINT_TO_FP() replaces SINT_TO_FP
node with UINT_TO_FP node and function combineUIntToFP() replace vice versa in cycle.
The fix prevents it.
Patch by vrybalov
Differential Revision: https://reviews.llvm.org/D45572
llvm-svn: 330711
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
* CFI instructions do not affect code generation (they are not counted as
instructions when tail duplicating or tail merging)
* Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Added CFIInstrInserter pass:
* analyzes each basic block to determine cfa offset and register are valid
at its entry and exit
* verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
* inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D42848
llvm-svn: 330706
Summary:
The pass is supposed to scalarize such intrinsics if the target does not support
them natively, so if the scalarization does not happen instruction selection
crashes due to inability to lower these intrinsics.
Reviewers: andrew.w.kaylor, craig.topper
Reviewed By: andrew.w.kaylor
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45947
llvm-svn: 330700
Summary:
This is [[ https://bugs.llvm.org/show_bug.cgi?id=37104 | PR37104 ]].
[[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]] will introduce an IR canonicalization that is likely bad for the end assembly.
Previously, `andl`+`andn`/`andps`+`andnps` / `bic`/`bsl` would be generated. (see `@out`)
Now, they would no longer be generated (see `@in`).
So we need to make sure that they are still generated.
If the mask is constant, we do nothing. InstCombine should have unfolded it.
Else, i use `hasAndNot()` TLI hook.
For now, only handle scalars.
https://rise4fun.com/Alive/bO6
----
I *really* don't like the code i wrote in `DAGCombiner::unfoldMaskedMerge()`.
It is super fragile. Is there something like IR Pattern Matchers for this?
Reviewers: spatel, craig.topper, RKSimon, javed.absar
Reviewed By: spatel
Subscribers: andreadb, courbet, kristof.beyls, javed.absar, rengolin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D45733
llvm-svn: 330646
Summary:
This is [[ https://bugs.llvm.org/show_bug.cgi?id=37104 | PR37104 ]].
[[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]] will introduce an IR canonicalization that is likely bad for the end assembly.
Previously, `andl`+`andn`/`andps`+`andnps` / `bic`/`bsl` would be generated. (see `@out`)
Now, they would no longer be generated (see `@in`).
I'm guessing `llvm/lib/CodeGen/SelectionDAG/DAGCombiner.cpp` should be able to unfold this.
Reviewers: spatel, craig.topper, RKSimon, javed.absar
Reviewed By: spatel
Subscribers: nemanjai, rengolin, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45563
llvm-svn: 330645
This helps debug issues where selection-dag assigns the wrong location
to an instruction.
Differential Revision: https://reviews.llvm.org/D45913
llvm-svn: 330618
Split the fp and integer vector logical instruction scheduler classes - older CPUs especially often handled these on different pipes.
This unearthed a couple of things that are also handled in this patch:
(1) We were tagging avx512 fp logic ops as WriteFAdd, probably because of the lack of WriteFLogic
(2) SandyBridge had integer logic ops only using Port5, when afaict they can use Ports015.
(3) Cleaned up x86 FCHS/FABS scheduling as they are typically treated as fp logic ops.
Differential Revision: https://reviews.llvm.org/D45629
llvm-svn: 330480
Three new instructions:
umonitor - Sets up a linear address range to be
monitored by hardware and activates the monitor.
The address range should be a writeback memory
caching type.
umwait - A hint that allows the processor to
stop instruction execution and enter an
implementation-dependent optimized state
until occurrence of a class of events.
tpause - Directs the processor to enter an
implementation-dependent optimized state
until the TSC reaches the value in EDX:EAX.
Also modifying the description of the mfence
instruction, as the rep prefix (0xF3) was allowed
before, which would conflict with umonitor during
disassembly.
Before:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
mfence
After:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
umonitor %rax
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45253
llvm-svn: 330462
This was originally committed at rL328921 and reverted at rL329920 to
investigate failures in Chrome. This time I've added to the ReleaseNotes
to warn users of the potential of exposing UB and let me repeat that
here for more exposure:
Optimization of floating-point casts is improved. This may cause surprising
results for code that is relying on undefined behavior. Code sanitizers can
be used to detect affected patterns such as this:
int main() {
float x = 4294967296.0f;
x = (float)((int)x);
printf("junk in the ftrunc: %f\n", x);
return 0;
}
$ clang -O1 ftrunc.c -fsanitize=undefined ; ./a.out
ftrunc.c:5:15: runtime error: 4.29497e+09 is outside the range of
representable values of type 'int'
junk in the ftrunc: 0.000000
Original commit message:
fptosi / fptoui round towards zero, and that's the same behavior as ISD::FTRUNC,
so replace a pair of casts with the equivalent node. We don't have to account for
special cases (NaN, INF) because out-of-range casts are undefined.
Differential Revision: https://reviews.llvm.org/D44909
llvm-svn: 330437
Silvermont and Goldmont have the same issue on popcnt as Sandy Bridge, Haswell, Broadwell, and Skylake. Believe it is fixed in Goldmont Plus.
llvm-svn: 330358
The XCHG16rr/XCHG32rr/XCHG64rr instructions should be 3 uops just like XCHG8rr. I believe they're just implemented as 3 move uops with a temporary register.
XADD is probably 2 moves and an add also using a temporary register.
Change the latency for both from 2 cycles to 3 cycles. Only 2 of the uops are serialized in their execution, the move into the temporary and the move out of the temporary. The move from one GPR to the other should be able to go in parallel with this if there are ALU resources available.
llvm-svn: 330349
This is the patch that lowers x86 intrinsics to native IR
in order to enable optimizations. The patch also includes folding
of previously missing saturation patterns so that IR emits the same
machine instructions as the intrinsics.
Patch by tkrupa
Differential Revision: https://reviews.llvm.org/D44785
llvm-svn: 330322
This removes a bunch of unnecessary InstRW overrides. It also cleans up the missing information from the Sandy Bridge model. Other fixes to other models.
llvm-svn: 330308
a zero register.
Previously I tried this and saw LLVM unable to transform this to fold
with memory operands such as spill slot rematerialization. However, it
clearly works as shown in this patch. We turn these into `cmpb $0,
<mem>` when useful for folding a memory operand without issue. This form
has no disadvantage compared to `testb $-1, <mem>`. So overall, this is
likely no worse and may be slightly smaller in some cases due to the
`testb %reg, %reg` form.
Differential Revision: https://reviews.llvm.org/D45475
llvm-svn: 330269
across basic blocks in the limited cases where it is very straight
forward to do so.
This will also be useful for other places where we do some limited
EFLAGS propagation across CFG edges and need to handle copy rewrites
afterward. I think this is rapidly approaching the maximum we can and
should be doing here. Everything else begins to require either heroic
analysis to prove how to do PHI insertion manually, or somehow managing
arbitrary PHI-ing of EFLAGS with general PHI insertion. Neither of these
seem at all promising so if those cases come up, we'll almost certainly
need to rewrite the parts of LLVM that produce those patterns.
We do now require dominator trees in order to reliably diagnose patterns
that would require PHI nodes. This is a bit unfortunate but it seems
better than the completely mysterious crash we would get otherwise.
Differential Revision: https://reviews.llvm.org/D45673
llvm-svn: 330264
Summary: Previously if a modifer was placed on a non-GPR register class we would hit an assert or crash.
Reviewers: echristo
Reviewed By: echristo
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D45751
llvm-svn: 330238
When we skip bitcasts while looking for GEP in LoadSoreVectorizer
we should also verify that the type is sized otherwise we assert
Differential Revision: https://reviews.llvm.org/D45709
llvm-svn: 330221
Summary:
Add an LLVM intrinsic for type discriminated event logging with XRay.
Similar to the existing intrinsic for custom events, but also accepts
a type tag argument to allow plugins to be aware of different types
and semantically interpret logged events they know about without
choking on those they don't.
Relies on a symbol defined in compiler-rt patch D43668. I may wait
to submit before I can see demo everything working together including
a still to come clang patch.
Reviewers: dberris, pelikan, eizan, rSerge, timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45633
llvm-svn: 330219
Split VCMP/VMAX/VMIN instructions off to WriteFCmp and VCOMIS instructions off to WriteFCom instead of assuming they match WriteFAdd
Differential Revision: https://reviews.llvm.org/D45656
llvm-svn: 330179
Using Goldmont's cost tables for these two upcoming
atom archs.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45612
llvm-svn: 330109
Roman Lebedev