Create convenience functions for printing error, warning and note to
stdout. Previously we had similar functions being used in dsymutil, but
given that this pattern is so common it makes sense to make it available
globally.
llvm-svn: 330091
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
The DwarfLinker can have some very deep recursion that can max out the
(significantly smaller) stack when using threads. We don't want this
limitation when we only have a single thread. We already have this
workaround for the architecture-related threading. This patch applies
the same workaround to the parallel analysis and cloning.
Differential revision: https://reviews.llvm.org/D45172
llvm-svn: 329093
When running dsymutil as part of your build system, it can be desirable
for warnings to be part of the end product, rather than just being
emitted to the output stream. This patch upstreams that functionality.
Differential revision: https://reviews.llvm.org/D44639
llvm-svn: 328965
This is a follow-up to r327137 where we unified error handling for the
DwarfLinker. This replaces calls to errs() and outs() with the
appropriate ostream wrapper everywhere in dsymutil.
llvm-svn: 327411
When processing a dSYM bundle, use llvm::sys::path to join the different
path components instead of using a string with hard coded forward
slashes as separators.
llvm-svn: 324622
This commit attempts to re-land the r324480 which was reverted in
r324493 because it broke the Windows bots. For now I disabled the two
update tests on Windows until I'm able to debug this.
Differential revision: https://reviews.llvm.org/D42880
llvm-svn: 324592
Now that dsymutil can generate accelerator tables, we can upstream the
update logic that, as the name implies, updates the accelerator tables
in an existing dSYM bundle. In combination with `-minimize` this can be
used to remove redundant .debug_(inlines|pubtypes|pubnames).
Differential revision: https://reviews.llvm.org/D42880
llvm-svn: 324480
Passing -minimize to dsymutil prevents the emission of .debug_inlines,
.debug_pubnames, and .debug_pubtypes in favor of the Apple accelerator
tables.
The actual check in the DWARF linker was added in r323655. This patch
simply enables it.
Differential revision: https://reviews.llvm.org/D42688
llvm-svn: 323812
Threading was disabled in r317263 because it broke a test in combination
with `-DLLVM_ENABLE_THREADS=OFF`. This was because a ThreadPool warning
was piped to llvm-dwarfdump which was expecting to read an object from
stdin.
This patch re-enables threading and fixes the offending test.
Unfortunately this required more than just moving the ThreadPool out of
the for loop because of the TempFile refactoring that took place in the
meantime.
Differential revision: https://reviews.llvm.org/D41180
llvm-svn: 320601
This patch adds support for running the DWARF verifier on the linked
debug info files. If the -verify options is specified and verification
fails, dsymutil exists with abort with non-zero exit code. This behavior
is *not* enabled by default.
Differential revision: https://reviews.llvm.org/D40777
llvm-svn: 320033
This patch implements `getBundleInfo`, which uses CoreFoundation to
obtain information about the CFBundle. This information is needed to
populate the Plist in the dSYM bundle.
This change only applies to darwin and is an NFC as far as other
platforms are concerned.
Differential revision: https://reviews.llvm.org/D40244
llvm-svn: 319416
This moves the file handling out of DwarfLinker.cpp.
This fixes what is at least an oddity if not a bug. DwarfLinker.cpp
was using ToolOutputFile, which uses RemoveFileOnSignal. The issue is
that dsymutil.cpp uses that too. It is now clear from the interface
that only dsymutil.cpp is responsible for creating and deleting files.
llvm-svn: 318334
This makes the command line options consistent with llvm-cov and
llvm-profdata, which both use `-num-threads` and `-j`.
This also addresses the conflict reported after landing D39355.
Differential revision: https://reviews.llvm.org/D39496
llvm-svn: 317104
This patch adds the --threads option to dsymutil to process
architectures in parallel. The feature is already present in the version
distributed with Xcode, but was not yet upstreamed.
This is NFC as far as the linking behavior is concerned. As threads are
used automatically, the current tests cover the change in
implementation.
Differential revision: https://reviews.llvm.org/D39355
llvm-svn: 316999
This patch adds timestamp verification for swiftmodule files. A new flag
is provided to allows us to disable this check in order to allow testing
of this feature.
Differential revision: https://reviews.llvm.org/D38686
llvm-svn: 315684
This patch adds timestamp verification for swiftmodule files.
- A new flag is provided to allows us to continue testing of the code
for embedding the__swift_ast. (git doesn't maintain timestamps)
- Adds a new test for fat (arm) binaries.
Differential revision: https://reviews.llvm.org/D38686
llvm-svn: 315456
Most callers were not expecting the exit(0) and trying to exit with a
different value.
This also adds back the call to cl::PrintHelpMessage in llvm-ar.
llvm-svn: 312761
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
llvm-dsymutil used to create the temporary files in the output directory.
This works fine except when the output directory contains a '%' char, which
is then replaced by llvm::sys::fs::createUniqueFile() generating an invalid
path.
Just use the default temp dir for those files.
llvm-svn: 268304
Even if we don't have it in PATH, lipo should usually exist in the same directory
as dsymutil. Keep the fallback looking up the PATH, it's very useful when
testing a non-installed executable.
llvm-svn: 249762
There was an issue in the test setup because the test requires an arch that
wasn't filtered by the lit.local.cfg, but given the set of bots that failed,
I'm not confident this is the (only) issue. So this commit also adds more
output to the test to help me track down the failure if it happens again.
Original commit message:
[dsymutil] Rewrite thumb triple names in user visible messages.
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245988
This reverts commit r245960.
Multiple bots are failing on the new test. It seemd like llvm-dsymutil exits with an error. Investigating.
llvm-svn: 245964
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245960
A dSYM bundle is a file hierarchy that looks slike this:
<bundle name>.dSYM/
Contents/
Info.plist
Resources/
DWARF/
<DWARF file(s)>
This is the default output mode of dsymutil.
llvm-svn: 244270
dsymutil should by default generate dSYM bundles which are filesystem
hierarchies containing the debug info and an additional Info.plist.
Currently llvm-dsymutil emits raw binaries containing the debug info.
This is what we call the 'flat mode'. Add a -f/-flat option that is
supposed to enable that flat mode, but don't wire it for now, only
pass it to the tests that will need it to stay functional once we
do bundle generation by default.
This basically makes this commit NFC and removes the noise from the
actual commit that adds support for bundle generation.
llvm-svn: 244269
The files were never written to and then deleted, but they were created
nonetheless. To prevent that, create a wrapper around the 2 variants of
createUniqueFile and use the one that only does an access(Exists) call
to check for name unicity in -no-output mode.
llvm-svn: 244172
This option allows to select a subset of the architectures when
performing a universal binary link. The filter is done completely
in the mach-o specific part of the code.
llvm-svn: 244160
The DWARF linker isn't touched by this, the implementation links
individual files and merges them together into a fat binary by
calling out to the 'lipo' utility.
The main change is that the MachODebugMapParser can now return
multiple debug maps for a single binary.
The test just verifies that lipo would be invoked correctly, but
doesn't actually generate a binary. This mimics the way clang
tests its external iplatform tools integration.
llvm-svn: 244087
llvm-dsymutil will start creating temporary files in a followup
commit. To ease the correct cleanup of this files, introduce a
helper called to exit dsymutil.
llvm-svn: 244086
Prevent all the unrelated LLVM options to appear in the -help output
by introducing a tool specific option category. As a drive-by improve
the wording of the help message.
llvm-svn: 243583
The dsymutil-classic -v option dumps the tool version rather than
putting it in verbose mode. Rename -v to -verbose and update the
tests that use it (in the process removing it from a few tests that
didn't require it anymore since the -dump-debug-map option was
introduced).
A followup commit will reintroduce the -v option that dumps the
version.
llvm-svn: 243582
This optimization allows the DWARF linker to reuse definition of
types it has emitted in previous CUs rather than reemitting them
in each CU that references them. The size and link time gains are
huge. For example when linking the DWARF for a debug build of
clang, this generates a ~150M dwarf file instead of a ~700M one
(the numbers date back a bit and must not be totally accurate
these days).
As with all the other parts of the llvm-dsymutil codebase, the
goal is to keep bit-for-bit compatibility with dsymutil-classic.
The code is littered with a lot of FIXMEs that should be
addressed once we can get rid of the compatibilty goal.
llvm-svn: 242847
With a couple more constructors that GCC thinks are necessary.
Original commit message:
[dsymutil] Accept a YAML debug map as input instead of a binary.
To do this, the user needs to pass the new -y flag.
As it wasn't tested before, the debug map YAML deserialization was
completely buggy (mainly because the DebugMapObject has a dual
mapping that allows to search by name and by address, but only the
StringMap got populated). It's fixed and tested in this commit by
augmenting some test with a 2 stage dwarf link: a frist llvm-dsymutil
reads the debug map and pipes it in a second instance that does the
actual link without touching the initial binary.
llvm-svn: 238959
Jonas Devlieghere