to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
event as a thread stop reason if we receive one, using
some macros to decode the payload.
Patch originally written by Fred Riss, with a few small changes
by myself.
Writing a test for this is a little tricky because the
mach exception data interpretation relies on header macros
or function calls - it may change over time and writing
a gdb_remote_client test for this would break as older
encoding interpretation is changed. I'll tak with Fred
about this more, but neither of us has been thrilled with
the kind of tests we could write for it.
<rdar://problem/13097323>, <rdar://problem/40144456>
llvm-svn: 346571
reads an ObjectFileMachO's string table in one chunk. Originally
this was commented out because binaries in the system's shared cache
all share a mega-string table and so reading the entire mega-strtab
for each binary was a performance problem.
In the reinstated code, I add a check that the binary we're reading
from memory is not in the shared cache (there isn't a constant in
<mach-o/loader.h> for this bit yet; we hardcode the value in one
other place in ObjectFileMachO alread). For binaries that we're
reading out of memory that are NOT in the shared cache, reading
the string table in one chunk is a big performance improvement.
Also have debugserver send up the flags value for binaries in its
response to the jGetLoadedDynamicLibrariesInfos request.
NFC.
<rdar://problem/33604496>
llvm-svn: 341511
The toolchain in Xcode 10 uses a new LC_BUILD_VERSION entry to identify
simulator binaries. Add support for reading those to debugserver.
The exisitng test testing that code is currently failling when run
with Xcode 10, no need for a new test.
llvm-svn: 334784
LLDB doesn't use this packet so we never hit this, but it looks like
some other projects talk to debugserver and are hitting an assert
(https://github.com/derekparker/delve/issues/1015).
We had an off by 1 in the accounting of the FPU structure sizes.
I added a test that basically just check that 'g' doesn't return
an error (currently it assert in debug builds). I didn't make
it an lldb-server test because it looks like lldb-server doesn't
implement the g packet.
llvm-svn: 331004
When I merged the 2 codepaths that return an OS type, I hade
checked that the places accepting 'iphoneos' would also accept
'ios', but then I got it backwards and return 'iphoneos'.
We use this value to build triples, and there 'iphoneos' is
invalid.
This also makes the test slightly simpler.
llvm-svn: 330877
Summary:
In one of the 2 places the LC_BUILD_VERSION load command is handled, there
is a bug preventing us from actually handling them (the address where to
read the load command was not updated). This patch factors reading the
deployment target load commands into a helper and adds testing for the 2
code paths calling the helper.
The testing is a little bit complicated because the only times those load
commands matter is when debugging a simulator process. I added a new
decorator to check that a specific SDK is available. The actual testing was
fairly easy once I knew how to run a simulated process.
Reviewers: jasonmolenda, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D45298
llvm-svn: 329374
Summary:
When a MIG routine returns KERN_FAILURE, the demux function will release any OOL resources like ports. In this case, task_port and thread_port will be released twice, potentially resulting in use after free of the ports.
I don't think we can test this in any useful way
rdar://problem/37331387
Reviewers: jasonmolenda
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D45011
llvm-svn: 328761
were originally written by Chris Bieneman, they've undergone a
number of changes since then.
Also including the debugserver bridgeos support, another arm
environment that runs Darwin akin to ios. These codepaths are
activated when running in a bridgeos environment which we're not
set up to test today.
There's additional (small) lldb changes to handle bridgeos binaries
that still need to be merged up.
Tested on a darwin system with avx512 hardware and without.
<rdar://problem/36424951>
llvm-svn: 326756
Remove obsolete measurements.
This check in requires at least 10.11
Reviewed: Jason Molenda, Jim Ingham
<rdar://problem/37047106> Xcode Memory gauge should show the jetsam ledger footprint rather than anonymous
llvm-svn: 324013
Fix alignment UB in some Mach exception-handling logic.
This lets us build lldb and debugserver with UBSan in trapping mode, and
get further along in the testing process before a trap is encountered.
rdar://35923991
llvm-svn: 320127
Null-checking functions which aren't marked weak_import is a no-op
(the compiler rewrites the check to 'true'), regardless of whether a
library providing its definition is weak-linked. If the deployment
target is greater than the minimum requirement, the availability markup
on APIs does not lower to weak_import.
Remove no-op null checks to clean up the code and silence warnings.
Differential Revision: https://reviews.llvm.org/D40812
llvm-svn: 319936
to match the changes Saleem Abdulrasool committed in r311579. Fixes
a testsuite failure now that the testsuite expects a 16 bit return
value for thsi reg.
llvm-svn: 311627
This refactoring changes two significant things about how the debugserver build system works:
(1) debugserver will include all appropriate architecture support, so we can now build arm or ppc debugservers
(2) debugserver can be built by itself, so you don't have to configure all of LLDB in order to generate debugserver.
llvm-svn: 308377
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Summary:
This patch refactors the CMake build system's support for building debugserver to allow us to build the majority of debugserver's sources into the debugserverCommon library which can then be reused by unit tests.
The first unit test I've written tests debug server's ability to accept incoming connections from LLDB. The test forks the process, and one side creates a listening socket using debugserver's socket API, the other side creates a transmitting socket using LLDB's TCPSocket class.
I have no clue where to even start getting this connected into the LLDB Xcode project, so for now these tests are CMake-only.
Reviewers: zturner, labath, jasonmolenda
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D31357
llvm-svn: 300111
This patch modifies the Get/Set Register Value/Context functions for Intel to not duplicate code for reading non-AVX registers. This is similar to other transformations I've been making to the AVX register handling code.
llvm-svn: 297787
This patch consolidates the DEBUG_FPU_REGS code for i386 and x86_64 to take advantage of the fact that the non-AVX members of the avx register state structure overlap with the standard fpu register state structure.
This reduces the amount of code required to set debug values into the register state structures because the register state structures are stored in a union.
llvm-svn: 297688
Summary:
The first Sandybridge iMacs with AVX support shipped in Spring 2011 with Snow Leopard as their OS. Unfortunately due to a kernel bug debugging AVX code was not really possible until 10.7.4.
The old code here checked the kernel build number to determine when to support AVX, but that code was incorrect. It verified that the kernel build number was greater than xnu-2020, which is the build of the kernel that had the fix for 10.8. The fix was also back ported to 10.7.4. Which means all publicly available OS builds 10.7.4 and later have working AVX support.
This new patch verifies that the host OS is greater than or equal to 10.7.4 by checking that the build number is greater than or equal to 11Exx.
The patch also removes the HasAVX assembly blob in favor of querying the kernel via sysctl for the hardware features.
Using sysctl is slower, however since the code is executed once and the result cached it is a better approach because it is possible for the kernel to disable AVX support on hardware that supports it, so listening to the kernel is a better approach for the debugger to take.
Reviewers: jasonmolenda, spyffe
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30918
llvm-svn: 297685
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
Summary:
This patch adds accurate dependency specifications to the mail LLDB libraries and tools.
In all cases except lldb-server, these dependencies are added in addition to existing dependencies (making this low risk), and I performed some code cleanup along the way.
For lldb-server I've cleaned up the LLVM dependencies down to just the minimum actually required. This is more than lldb-server actually directly references, and I've left a todo in the code to clean that up.
Reviewers: labath, zturner
Subscribers: lldb-commits, danalbert, srhines, ki.stfu, mgorny, jgosnell
Differential Revision: https://reviews.llvm.org/D29333
llvm-svn: 293686
requires that this private framework be available - and it is not
available earlier than macOS 10.12 - to build lldb), dlopen the
framework binary on demand in debugserver. We're already using
dlsym() to look up all the symbols so there is no need to use weak
linking here.
<rdar://problem/30158797>
llvm-svn: 293135
30 seconds to match the old springboard timeout; the launcher
should time out before that and we will hopefully get back
an informative error message instead of timing out ourselves.
llvm-svn: 290163
In LLVM's CMake we have a convention that components have both a build and an install target. Making LLDB follow this convention will allow LLDB to take advantage of the LLVM_DISTRIBUTION_COMPONENTS build option from LLVM.
llvm-svn: 289879
Chandler Carruth