This currently shows up as a selection fallback since the dest regs were given
GPR banks but the source was a vector FPR reg.
Differential Revision: https://reviews.llvm.org/D57408
llvm-svn: 352545
During the lowering of a switch that would result in the generation of a
jump table, a range check is performed before indexing into the jump
table, for the switch value being outside the jump table range and a
conditional branch is inserted to jump to the default block. In case the
default block is unreachable, this conditional jump can be omitted. This
patch implements omitting this conditional branch for unreachable
defaults.
Review ID: D52002
Reviewers: Hans Wennborg, Eli Freidman, Roman Lebedev
llvm-svn: 352484
Windows ARM64 has PIC relocation model and uses jump table kind
EK_LabelDifference32. This produces jump table entry as
".word LBB123 - LJTI1_2" which represents the distance between the block
and jump table.
A new relocation type (IMAGE_REL_ARM64_REL32) is needed to do the fixup
correctly if they are in different COFF section.
This change saves the jump table to the same COFF section as the
associated code. An ideal fix could be utilizing IMAGE_REL_ARM64_REL32
relocation type.
Patch by Tom Tan!
Differential Revision: https://reviews.llvm.org/D57277
llvm-svn: 352465
This adds support for legalizing G_FLOG into a RTLib call.
It adds a legalizer test, and updates the existing floating point tests.
https://reviews.llvm.org/D57347
llvm-svn: 352429
This adds instruction selection support for @llvm.log10 in AArch64. It teaches
GISel to lower it to a library call, updates the relevant tests, and adds a
legalizer test for log10.
https://reviews.llvm.org/D57341
llvm-svn: 352418
The 'apple-latest' alias is supposed to provide a CPU that contains the
latest Apple processor model supported by LLVM.
This is supposed to be used by tools like lldb to provide a target that
supports most of the CPU features.
For now, this is mapped to Cyclone.
Differential Revision: https://reviews.llvm.org/D56384
llvm-svn: 352412
This adds ISel support for lifetime markers in opt levels above O0.
It also updates the arm64-irtranslator test, and updates some AArch64 tests that
use them for added coverage.
It also adds a testcase taken from the X86 codegen tests which verified a bug
caused by lifetime markers + stack colouring in the past. This is intended to
make sure that GISel doesn't re-introduce the bug.
(This is basically a straight copy from what SelectionDAG does in
SelectionDAGBuilder.cpp)
https://reviews.llvm.org/D57187
llvm-svn: 352410
This contains all of the legalizer changes from D57197 necessary to select
G_FCOS and G_FSIN. It also updates several existing IR tests in
test/CodeGen/AArch64 that verify that we correctly lower the G_FCOS and G_FSIN
instructions.
https://reviews.llvm.org/D57197
3/3
llvm-svn: 352402
This introduces generic instrutions for floating point sin and cos, G_FCOS and
G_FSIN. It updates the tests, etc.
https://reviews.llvm.org/D57197
1/3
llvm-svn: 352400
This fixes loads like 's1 = load %p (load 1 from %p)' being combined with an
extend into an illegal 's8 = g_extload %p (load 1 from %p)' which doesn't do any
extension, by avoiding touching those < s8 size loads.
This bug was uncovered by a verifier update r351584, which I reverted it to keep
the bots green.
llvm-svn: 352311
The IR enforced limit for the address space is 24-bits, but LLT was
only using 23-bits. Additionally, the argument to the constructor was
truncating to 16-bits.
A similar problem still exists for the number of vector elements. The
IR enforces no limit, so if you try to use a vector with > 65535
elements the IRTranslator asserts in the LLT constructor.
llvm-svn: 352264
https://reviews.llvm.org/D57178
Now add a hook in TargetPassConfig to query if CSE needs to be
enabled. By default this hook returns false only for O0 opt level but
this can be overridden by the target.
As a consequence of the default of enabled for non O0, a few tests
needed to be updated to not use CSE (by passing in -O0) to the run
line.
reviewed by: arsenm
llvm-svn: 352126
This patch adds support for vector @llvm.ceil intrinsics when full 16 bit
floating point support isn't available.
To do this, this patch...
- Implements basic isel for G_UNMERGE_VALUES
- Teaches the legalizer about 16 bit floats
- Teaches AArch64RegisterBankInfo to respect floating point registers on
G_BUILD_VECTOR and G_UNMERGE_VALUES
- Teaches selectCopy about 16-bit floating point vectors
It also adds
- A legalizer test for the 16-bit vector ceil which verifies that we create a
G_UNMERGE_VALUES and G_BUILD_VECTOR when full fp16 isn't supported
- An instruction selection test which makes sure we lower to G_FCEIL when
full fp16 is supported
- A test for selecting G_UNMERGE_VALUES
And also updates arm64-vfloatintrinsics.ll to show that the new ceiling types
work as expected.
https://reviews.llvm.org/D56682
llvm-svn: 352113
As part of speculation hardening, the stack pointer gets masked with the
taint register (X16) before a function call or before a function return.
Since there are no instructions that can directly mask writing to the
stack pointer, the stack pointer must first be transferred to another
register, where it can be masked, before that value is transferred back
to the stack pointer.
Before, that temporary register was always picked to be x17, since the
ABI allows clobbering x17 on any function call, resulting in the
following instruction pattern being inserted before function calls and
returns/tail calls:
mov x17, sp
and x17, x17, x16
mov sp, x17
However, x17 can be live in those locations, for example when the call
is an indirect call, using x17 as the target address (blr x17).
To fix this, this patch looks for an available register just before the
call or terminator instruction and uses that.
In the rare case when no register turns out to be available (this
situation is only encountered twice across the whole test-suite), just
insert a full speculation barrier at the start of the basic block where
this occurs.
Differential Revision: https://reviews.llvm.org/D56717
llvm-svn: 351930
Each hwasan check requires emitting a small piece of code like this:
https://clang.llvm.org/docs/HardwareAssistedAddressSanitizerDesign.html#memory-accesses
The problem with this is that these code blocks typically bloat code
size significantly.
An obvious solution is to outline these blocks of code. In fact, this
has already been implemented under the -hwasan-instrument-with-calls
flag. However, as currently implemented this has a number of problems:
- The functions use the same calling convention as regular C functions.
This means that the backend must spill all temporary registers as
required by the platform's C calling convention, even though the
check only needs two registers on the hot path.
- The functions take the address to be checked in a fixed register,
which increases register pressure.
Both of these factors can diminish the code size effect and increase
the performance hit of -hwasan-instrument-with-calls.
The solution that this patch implements is to involve the aarch64
backend in outlining the checks. An intrinsic and pseudo-instruction
are created to represent a hwasan check. The pseudo-instruction
is register allocated like any other instruction, and we allow the
register allocator to select almost any register for the address to
check. A particular combination of (register selection, type of check)
triggers the creation in the backend of a function to handle the check
for specifically that pair. The resulting functions are deduplicated by
the linker. The pseudo-instruction (really the function) is specified
to preserve all registers except for the registers that the AAPCS
specifies may be clobbered by a call.
To measure the code size and performance effect of this change, I
took a number of measurements using Chromium for Android on aarch64,
comparing a browser with inlined checks (the baseline) against a
browser with outlined checks.
Code size: Size of .text decreases from 243897420 to 171619972 bytes,
or a 30% decrease.
Performance: Using Chromium's blink_perf.layout microbenchmarks I
measured a median performance regression of 6.24%.
The fact that a perf/size tradeoff is evident here suggests that
we might want to make the new behaviour conditional on -Os/-Oz.
But for now I've enabled it unconditionally, my reasoning being that
hwasan users typically expect a relatively large perf hit, and ~6%
isn't really adding much. We may want to revisit this decision in
the future, though.
I also tried experimenting with varying the number of registers
selectable by the hwasan check pseudo-instruction (which would result
in fewer variants being created), on the hypothesis that creating
fewer variants of the function would expose another perf/size tradeoff
by reducing icache pressure from the check functions at the cost of
register pressure. Although I did observe a code size increase with
fewer registers, I did not observe a strong correlation between the
number of registers and the performance of the resulting browser on the
microbenchmarks, so I conclude that we might as well use ~all registers
to get the maximum code size improvement. My results are below:
Regs | .text size | Perf hit
-----+------------+---------
~all | 171619972 | 6.24%
16 | 171765192 | 7.03%
8 | 172917788 | 5.82%
4 | 177054016 | 6.89%
Differential Revision: https://reviews.llvm.org/D56954
llvm-svn: 351920
For AMDGPU the shift amount is never 64-bit, and
this needs to use a 32-bit shift.
X86 uses i8, but seemed to be hacking around this before.
llvm-svn: 351882
Not sure this is the best fix, but it saves an instruction for certain
constructs involving variable shifts.
Differential Revision: https://reviews.llvm.org/D55572
llvm-svn: 351768
These are copied from the sibling x86 file. I'm not sure which
of the current outputs (if any) is considered optimal, but
someone more familiar with AArch may want to take a look.
llvm-svn: 351754
The regression test is reduced from the example shown in D56281.
This does raise a question as noted in the test file: do we want
to handle this pattern? I don't have a motivating example for
that on x86 yet, but it seems like we could have that pattern
there too, so we could avoid the back-and-forth using a shuffle.
llvm-svn: 351753
EXPENSIVE_CHECKS buildbots are failing due to r351404.
Add x1 as live in to the funclet basic block for SEH funclets, as well as
-verify-machineinstrs to the test case that triggered the failure.
llvm-svn: 351472
There are cases where we have multiple epilogues that have the exact same unwind
code sequence. In that case, the epilogues can share the same unwind codes in
the .xdata section. This should get us past the assert "SEH unwind data
splitting not yet implemented" in many cases.
We still need to add support for generating multiple .pdata/.xdata sections for
those functions that need to be split into fragments.
Differential Revision: https://reviews.llvm.org/D56813
llvm-svn: 351421
Summary:
This patch supports MS SEH extensions __try/__except/__finally. The intrinsics localescape and localrecover are responsible for communicating escaped static allocas from the try block to the handler.
We need to preserve frame pointers for SEH. So we create a new function/property HasLocalEscape.
Reviewers: rnk, compnerd, mstorsjo, TomTan, efriedma, ssijaric
Reviewed By: rnk, efriedma
Subscribers: smeenai, jrmuizel, alex, majnemer, ssijaric, ehsan, dmajor, kristina, javed.absar, kristof.beyls, chrib, llvm-commits
Differential Revision: https://reviews.llvm.org/D53540
llvm-svn: 351370
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
llvm-svn: 351200
A block ending in an unconditional branch can have two successors if one
is a landing pad. In practice, I think this only has an effect on
Windows because landing pads are never empty for Itanium unwinding.
(Alternatively, I could add a check to
AArch64InstrInfo::canInsertSelect, but this seems more obvious.)
Differential Revision: https://reviews.llvm.org/D56468
llvm-svn: 351142
Otherwise, with D56544, the intrinsic will be expanded to an integer
csel, which is probably not what the user expected. This matches the
general convention of using "v1" types to represent scalar integer
operations in vector registers.
While I'm here, also add some error checking so we don't generate
illegal ABS nodes.
Differential Revision: https://reviews.llvm.org/D56616
llvm-svn: 351141
This feature enables the fusion of some arithmetic and logic instructions
together.
Differential revision: https://reviews.llvm.org/D56572
llvm-svn: 351139
Part of the effort to refactoring frame pointer code generation. We used
to use two function attributes "no-frame-pointer-elim" and
"no-frame-pointer-elim-non-leaf" to represent three kinds of frame
pointer usage: (all) frames use frame pointer, (non-leaf) frames use
frame pointer, (none) frame use frame pointer. This CL makes the idea
explicit by using only one enum function attribute "frame-pointer"
Option "-frame-pointer=" replaces "-disable-fp-elim" for tools such as
llc.
"no-frame-pointer-elim" and "no-frame-pointer-elim-non-leaf" are still
supported for easy migration to "frame-pointer".
tests are mostly updated with
// replace command line args ‘-disable-fp-elim=false’ with ‘-frame-pointer=none’
grep -iIrnl '\-disable-fp-elim=false' * | xargs sed -i '' -e "s/-disable-fp-elim=false/-frame-pointer=none/g"
// replace command line args ‘-disable-fp-elim’ with ‘-frame-pointer=all’
grep -iIrnl '\-disable-fp-elim' * | xargs sed -i '' -e "s/-disable-fp-elim/-frame-pointer=all/g"
Patch by Yuanfang Chen (tabloid.adroit)!
Differential Revision: https://reviews.llvm.org/D56351
llvm-svn: 351049
This patch takes some of the code from D49837 to allow us to enable ISD::ABS support for all SSE vector types.
Differential Revision: https://reviews.llvm.org/D56544
llvm-svn: 350998
Summary:
This patch changes the legalization action for some half-precision floating-
point vector intrinsics (FSIN, FLOG, etc.) from Promote to Expand. These ops
are not supported in hardware for half-precision vectors, but promotion is
not always possible (for v8f16 operands). Changing the action to Expand fixes
an assertion failure in the legalizer when the frontend produces such ops.
In addition, a quick microbenchmark shows that, in the v4f16 case,
expanding introduces fewer spills and is therefore slightly faster than
promoting.
Reviewers: t.p.northover, SjoerdMeijer
Reviewed By: SjoerdMeijer
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D56296
llvm-svn: 350825
Summary:
D55896 and D56029 add support to emit fixups for :abs_g0: , :abs_g1_s: , etc.
This patch adds the necessary enums and MCExpr needed for lowering these.
Reviewers: rnk, mstorsjo, efriedma
Reviewed By: efriedma
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D56037
llvm-svn: 350798
If the caller's return type does not have a zeroext attribute but the
callee does a tail call zeroext, we won't consider the tail call during
CodeGenPrepare because the attributes don't match.
However, if the result of the tail call has no uses, it makes sense to
drop the sext/zext attributes.
Differential Revision: https://reviews.llvm.org/D56486
llvm-svn: 350753
This is an initial implementation for Speculative Load Hardening for
AArch64. It builds on top of the recently introduced
AArch64SpeculationHardening pass.
This doesn't implement (yet) some of the optimizations implemented for
the X86SpeculativeLoadHardening pass. I thought introducing the
optimizations incrementally in follow-up patches should make this easier
to review.
Differential Revision: https://reviews.llvm.org/D55929
llvm-svn: 350729
Matt Arsenault