This is a reworked version of the reverted patch: https://reviews.llvm.org/D112487
Note that
a) it doesn't need the test changes anymore, and
b) I checked at least locally it passes other.test_pthread_lsan_leak
Differential Revision: https://reviews.llvm.org/D113208
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
`WebAssemblyDebugValueManager` does not currently handle
`DBG_VALUE_LIST`, which is a recent addition to LLVM. We tried to
nullify them within the constructor of `WebAssemblyDebugValueManager` in
D102589, but it made the class error-prone to use because it deletes
instructions within the constructor and thus invalidates existing
iterators within the BB, so the user of the class should take special
care not to use invalidated iterators. This actually caused a bug in
ExplicitLocals pass.
Instead of trying to fix ExplicitLocals pass to make the iterator usage
correct, which is possible but error-prone, this adds
NullifyDebugValueLists pass that nullifies all `DBG_VALUE_LIST`
instructions before we run WebAssembly specific passes in the backend.
We can remove this pass after we implement handlers for
`DBG_VALUE_LIST`s in `WebAssemblyDebugValueManager` and elsewhere.
Fixes https://github.com/emscripten-core/emscripten/issues/14255.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D102999
WebAssemblyDebugValueManager class currently does not handle
DBG_VALUE_LIST instructions correctly for two reasons, which are
explained in https://bugs.llvm.org/show_bug.cgi?id=50361.
This effectively nullifies DBG_VALUE_LISTs in
WebAssemblyDebugValueManager so that the info will appear as "optimized
out" in debuggers but still be at least correct in the meantime.
Reviewed By: dschuff, jmorse
Differential Revision: https://reviews.llvm.org/D102589
This CL
1. Creates Utils/ directory under lib/Target/WebAssembly
2. Moves existing WebAssemblyUtilities.cpp|h into the Utils/ directory
3. Creates Utils/WebAssemblyTypeUtilities.cpp|h and put type
declarataions and type conversion functions scattered in various
places into this single place.
It has been suggested several times that it is not easy to share utility
functions between subdirectories (AsmParser, DIsassembler, MCTargetDesc,
...). Sometimes we ended up [[ https://reviews.llvm.org/D92840#2478863 | duplicating ]] the same function because of
this.
There are already other targets doing this: AArch64, AMDGPU, and ARM
have Utils/ subdirectory under their target directory.
This extracts the utility functions into a single directory Utils/ and
make them sharable among all passes in WebAssembly/ and its
subdirectories. Also I believe gathering all type-related conversion
functionalities into a single place makes it more usable. (Actually I
was working on another CL that uses various type conversion functions
scattered in multiple places, which became the motivation for this CL.)
Reviewed By: dschuff, aardappel
Differential Revision: https://reviews.llvm.org/D100995
This removes `exnref` type and `br_on_exn` instruction. This is
effectively NFC because most uses of these were already removed in the
previous CLs.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94041
A struct in C passed by value did not get debug information. Such values are currently
lowered to a Wasm local even in -O0 (not to an alloca like on other archs), which becomes
a Target Index operand (TI_LOCAL). The DWARF writing code was not emitting locations
in for TI's specifically if the location is a single range (not a list).
In addition, the ExplicitLocals pass which removes the ARGUMENT pseudo instructions did
not update the associated DBG_VALUEs, and couldn't even find these values since the code
assumed such instructions are adjacent, which is not the case here.
Also fixed asm printing of TIs needed by a test.
Differential Revision: https://reviews.llvm.org/D94140
This adds missing `select` instruction support and block return type
support for reference types. Also refactors WebAssemblyInstrRef.td and
rearranges tests in reference-types.s. Tests don't include `exnref`
types, because we currently don't support `exnref` for `ref.null` and
the type will be removed soon anyway.
Reviewed By: tlively, sbc100, wingo
Differential Revision: https://reviews.llvm.org/D92359
Implementation of instructions table.get, table.set, table.grow,
table.size, table.fill, table.copy.
Missing instructions are table.init and elem.drop as they deal with
element sections which are not yet implemented.
Added more tests to tables.s
Differential Revision: https://reviews.llvm.org/D89797
Soon it will be disallowed to depend on MachineFunction state in the
constructor. This was only being used to get the MachineRegisterInfo
for an assert, which I'm not sure is necessarily worth it. I would
think any missing defs would be caught by the verifier later instead.
Having an alloca in a function causes the stack pointer to be generated in the
prolog, but if it's unused other than for debug info, explicit-locals will drop
it and not allocate a local. In this case we need to reset the FrameBaseVreg.
Differential Revision: https://reviews.llvm.org/D76784
Summary:
Fixes: https://bugs.llvm.org/show_bug.cgi?id=44920
WebAssemblyRegColoring may merge the vreg that currently represents
the FrameBase with one representing an argument.
WebAssemblyExplicitLocals picks up the corresponding local when
a vreg is first added to the Reg2Local mapping, except when it is
an argument instruction which are handled separately.
Note that this does not change that vregs representing the FrameBase
may get merged, it is not clear to me that this may have other
effects we may want to avoid?
Reviewers: dschuff
Reviewed By: dschuff
Subscribers: azakai, sbc100, hiraditya, aheejin, sunfish, llvm-commits, jgravelle-google
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75718
Summary:
There is still room for improvement in the handling of multivalue
nodes in both passes, but the current algorithm is at least correct
and optimizes some simpler cases. In order to make future
optimizations of these passes easier and build confidence that the
current algorithms are correct, this CL also adds a script that
automatically and exhaustively generates interesting multivalue test
cases.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72902
2 fixes:
Register coloring can re-assign virtual registers. When the frame base register
is colored, update the DwarfFrameBase accordingly When the frame base register
is stackified, do not attempt to encode DW_AT_frame_base as a local In the
future we will presumably want to handle this case better but for now we can
emit worse debug info rather than crashing.
Differential Revision: https://reviews.llvm.org/D73581
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
This is a reland of rG3a05c3969c18 with fixes for the expensive-checks
and Windows builds
Differential Revision: https://reviews.llvm.org/D71681
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
Differential Revision: https://reviews.llvm.org/D71681
Extends DWARF expression language to express locals/globals locations. (via
target-index operands atm) (possible variants are: non-virtual registers
or address spaces)
The WebAssemblyExplicitLocals can replace virtual registers to targertindex
operand type at the time when WebAssembly backend introduces
{get,set,tee}_local instead of corresponding virtual registers.
Reviewed By: aprantl, dschuff
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D52634
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
Summary:
Most of these functions can work for MachineInstr and MCInst
equally now.
Reviewers: dschuff
Subscribers: MatzeB, sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64643
llvm-svn: 365965
Summary:
- Replaces some uses of `MachineFunction::iterator(MBB)` with
`MBB->getIterator()` and `MachineBasicBlock::iterator(MI)` with
`MI->getIterator()`, which are simpler.
- Replaces some uses of `std::prev` of `std::next` that takes a
MachineFunction or MachineBasicBlock iterator with `getPrevNode` and
`getNextNode`, which are also simpler.
Reviewers: sbc100
Subscribers: dschuff, sunfish, jgravelle-google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58913
llvm-svn: 355444
I'm looking at adding a second INLINEASM opcode for better modeling asm-goto
as a terminator. Using the existing predicate will reduce teh number of
places that will need to use the new opcode.
llvm-svn: 353095
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
Also add tests to catch crashes in passes that are not normally run in
tests.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52959
llvm-svn: 344094
Summary:
rL341389 broke code with tied register operands in inline assembly. For
example, `asm("" : "=r"(var) : "0"(var));`
The code above specifies the input operand to be in the same register
with the output operand, tying the two register. This patch makes this
kind of code work again.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, eraman, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51991
llvm-svn: 342084
Use MachineOperand::ChangeToImmediate rather than reassigning
MachineOperands to new values created from MachineOperand::CreateImm,
so that their parent pointers are preserved.
This fixes "Instruction has operand with wrong parent set" errors
reported by the MachineVerifier.
llvm-svn: 341389
Summary:
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, eraman, aheejin, llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51241
llvm-svn: 340750
Summary:
Moved Explicit Locals pass to last.
Made that pass obligatory.
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: jfb, llvm-commits, aheejin, eraman, jgravelle-google, sbc100
Differential Revision: https://reviews.llvm.org/D50568
llvm-svn: 339474
Summary:
Moved Explicit Locals pass to last.
Made that pass obligatory.
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, eraman, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D49160
llvm-svn: 338164
This support was partial and temporary. Now that we have
wasm object file support its no longer needed.
Differential Revision: https://reviews.llvm.org/D48744
llvm-svn: 337222
Summary:
This fixes liveness tracking information after `drop` instruction
insertion in ExplicitLocals pass.
When a drop instruction is inserted to drop a dead register operand, the
original operand should be marked not dead anymore because it is now
used by the new drop instruction. And the operand to the new drop
instruction should be marked killed instead. This bug caused some
programs to fail when `llc` is run with `-verify-machineinstrs` option.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D48253
llvm-svn: 335074
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Jim Lin