Summary:
After rLLDB365761, and with `LLVM_ENABLE_ABI_BREAKING_CHECKS` enabled,
launching any process on FreeBSD crashes lldb with:
```
Expected<T> must be checked before access or destruction.
Expected<T> value was in success state. (Note: Expected<T> values in success mode must still be checked prior to being destroyed).
```
This is because `m_operation_thread` and `m_monitor_thread` were wrapped
in `llvm::Expected<>`, but this requires the objects to be correctly
initialized before accessing them.
To fix the crashes, use `llvm::Optional<>` for the members (as indicated
by labath), and use local variables to store the return values of
`LaunchThread` and `StartMonitoringChildProcess`. Then, only assign to
the member variables after checking if the return values indicated
success.
Reviewers: devnexen, emaste, MaskRay, mgorny
Reviewed By: devnexen
Subscribers: jfb, labath, krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D68723
llvm-svn: 374444
Summary:
With the XCode project gone, there doesn't seem to be anything setting
this macro anymore -- and the macro wasn't doing much anyway.
Reviewers: jingham, sgraenitz
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D66742
llvm-svn: 371018
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
This brings the LLDB configuration closer to LLVM's and removes visual
clutter in the source code by removing the @brief commands from
comments.
This patch also reflows the paragraphs in all doxygen comments.
See also https://reviews.llvm.org/D46290.
Differential Revision: https://reviews.llvm.org/D46321
llvm-svn: 331373
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Previously, an attempt to read an unreadable address reported zeros.
Now, if DoReadMemory or DoWriteMemory encounters error then return 0
(bytes read or written) so that the error is reported to the user.
llvm.org/pr37190
llvm-svn: 330500
the previous fix did not work because of different const qualifications
on the envp pointer.
This should resolve that (and remove a couple of const_casts in the
process).
llvm-svn: 322187
This is the FreeBSD equivalent of r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
llvm-svn: 310591
strerror is not thread-safe. llvm's StrError tries hard to retrieve the
string in a thread-safe way and falls back to strerror only if it does
not have another way.
llvm-svn: 304795
In the absense of a more specific handler for TRAP_CAP (generated by
ENOTCAPABLE or ECAPMODE while in capability mode) treat it as a trace
trap. Obtained from FreeBSD r318884.
We should later add an option to have LLDB control the trapcap procctl
(as with ASLR), as well as report a specific stop reason. For now this
change eliminates an assertion failure from LLDB.
llvm-svn: 303965
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Summary:
The files there can always be referred to using their full path, which
is what most of the code has been doing already, so this makes the
situation more consistent. Also fix the the code in the FreeBSD plugin
to use the new paths.
Reviewers: eugene, emaste
Subscribers: lldb-commits, kettenis, mgorny, krytarowski
Differential Revision: https://reviews.llvm.org/D31877
llvm-svn: 299933
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Implementation of software single step for FreeBSD on ARM. The code is
largely based on the Linux implementation of the same functionality.
Patch by Dmitry Mikulin!
Differential Revision: https://reviews.llvm.org/D25756
llvm-svn: 292937
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
Summary:
This replaces the C-style "void *" baton of the child process monitoring functions with a more
C++-like API taking a std::function. The motivation for this was that it was very difficult to
handle the ownership of the object passed into the callback function -- each caller ended up
implementing his own way of doing it, some doing it better than others. With the new API, one can
just pass a smart pointer into the callback and all of the lifetime management will be handled
automatically.
This has enabled me to simplify the rather complicated handshake in Host::RunShellCommand. I have
left handling of MonitorDebugServerProcess (my original motivation for this change) to a separate
commit to reduce the scope of this change.
Reviewers: clayborg, zturner, emaste, krytarowski
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D20106
llvm-svn: 269205
As of r240543 ProcessPOSIX and POSIXThread are used only on FreeBSD, so
just roll them into ProcessFreeBSD and FreeBSDThread.
Differential Revision: http://reviews.llvm.org/D10698
llvm-svn: 243427
The values of four important registers are included in logs for ptrace
PT_GETREGS. Put all four on the same line for a more compact log. Also
use the proper 64-bit register names.
llvm-svn: 240581
The latter is uint64_t beacuse lldb supports arbitrary pid/platforms
but in this case we're using it as return value for fork() which might
return -1 to the parent in case the syscall fails.
Differential Revision: http://reviews.llvm.org/D8491
llvm-svn: 232926
Summary:
After closing all the leaked file descriptors to the inferior tty, the following problem occured:
- when stdin, stdout and stderr are redirected, there are no slave descriptors open (which is good)
- lldb has a reader thread, which attempts to read from the master end of the tty
- this thread receives an EOF
- in response, it closes it's master end
- as this is the last open file descriptor for the master end, this deletes the tty and sends
SIGHUP to the inferior (this is bad)
I fix this problem by making sure the master end remains open for the duration of the inferior
process by storing a copy of the file descriptor in ProcessMonitor. I create a copy to avoid
ownership issues with the reading thread.
Reviewers: ovyalov, emaste
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7440
llvm-svn: 228391
Summary:
Taking advantage of the new 'CFAIsRegisterDereferenced' CFA register type, add
full stack unwind support to the PowerPC/PowerPC64 ABI. Also, add a new
register set for powerpc32-on-64, so the register sizes are correct. This also
requires modifying the ProcessMonitor to add support for non-uintptr_t-sized
register values.
Reviewers: jasonmolenda, emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6183
llvm-svn: 221789
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
On FreeBSD ptrace(PT_KILL) is used to terminate the traced process
(as if PT_CONTINUE had been used with SIGKILL as the signal to be
delivered), and is the desired behaviour for ProcessPOSIX::DoDestroy.
On Linux, after ptrace(PTRACE_KILL) the traced process still exists
and can be interrogated. It is only upon resume that it exits as though
it received SIGKILL.
For now I'm committing only the FreeBSD change, until the Linux change
(review D3159) is successfully tested.
http://llvm.org/pr18894
llvm-svn: 205315
Implement x86_64 debug register read/write in support of hardware
watchpoints. Hoist LinuxThread::TraceNotify code back into
POSIXThread::TraceNotify()
Patch by John Wolfe.
We still need to rework this later to avoid the #ifdef FreeBSD.
llvm-reviews.chandlerc.com/D2572
llvm.org/pr16706
llvm-svn: 201706
Dimitry Andric